FM-20ORB & FM-28ORB
20” & 28” ORBITAL FLOOR MACHINES
HIGHEST PERFORMANCE WITH THE CLEANEST, QUIETEST, EASIEST OPERATION
These new orbital floor machines are powerhouses delivering the highest combination of down pressures and
RPM in the industry. Then, add to its power with features like the first high-speed orbital to achieve less than
69 dBa noise levels, an instantly adjustable handle and optional HEPA dust control, and you’ve got a Purpose
Built® tool that can perform the toughest tasks anytime, anywhere.
A
E
Only high-speed orbital floor
machines below 69 dBa - over 65%
quieter than the nearest competitor!
Highest down pressures in category -
B with or without weights!
A
First with reach under cleaning on
C three sides with weights in place
Optional HEPA dust control - unique
D design allows single cord operation
D
C
Convenient and instant handle
E adjustment from the operator
position - no hard knobs or
awkward levers!
B
APPLICATIONS:
Purpose Built® for use any time with less than 69 dBa noise levels and optional
HEPA filtered dust control, these units easily attack:
• Chemical-free finish removal (dry prep)
• Cement grinding and polishing
• Finish stripping (with chemical)
• Sanding and screening
• Floor scrubbing (even grouted floors)
• Other extreme-duty jobs
• Stone grinding and polishing
pacificfloorcare.com
FEATURES
SPECIFICATIONS
MODEL:
FM-20ORB
FM-28ORB
PART NUMBER(S):
545411 (w/o weight kit)
545413 (w/ weight kit)
545421 (w/o weight kit)
545422 (w/ weight kit)
Motor horsepower:
1.5 hp
1.5 hp
Motor type:
56C, continuous duty TEFC motor
56C, continuous duty TEFC motor
Pad speed rpm:
3,530 rpm
3,530 rpm
Head / pad dimensions:
20 in x 14 in
28 in x 14 in
Productivity (per hour)*:
7,920 ft at 1.0 mph (scrubbing)
3,960 ft2 at 0.5 mph (finish removal)
11,440 ft2 at 1.0 mph (scrubbing)
5,720 ft2 at 0.5 mph (finish removal)
PAD DRIVE SYSTEM
2
ELECTRICAL SYSTEM
Voltage:
115 V
115 V
Power consumption amps:
15 amp
15 amp
Power cord length / type:
50 ft, 14/3 STO, safety yellow
50 ft, 14/3 STO, safety yellow
Safety approvals:
ETL tested to UL/CSA standards
ETL tested to UL/CSA standards
MACHINE SPECIFICATIONS
Product length:
20 in
20 in
Product width:
20 in
28 in
Product height:
46 in
46 in
Product weight (w/cord):
125lb (without weight kit)
150 lb (without weight kit)
Product weight (w/optional weight kit):
165 lb
210 lb
Sound level (operator’s ear):
< 69 dBA
< 69 dBA
Base construction:
Epoxy coated, 3/4 in thick steel weldment
Epoxy coated, 3/4 in thick steel weldment
Pad drive plate:
0.25 in thick 6061 aluminum
0.25 in thick 6061 aluminum
Reach under with weights:
Yes, 2.5 in on three sides
Yes, 2.5 in on front, 5.5 in on sides
Handle construction:
Welded structural steel tubing
Welded structural steel tubing
Safety interlock triggers:
Yes
Yes
Handle adjustment:
Lever at operator position near triggers
Lever at operator position near triggers
Dust control system (optional):
6 qt vacuum with HEPA filtration
6 qt vacuum with HEPA filtration
Parts**:
3 years
3 years
Labor:
1 year
1 year
Pads-Case of 10, 20 in x 14 in
855902 maroon, surface prep
855908 black, stripping
855906 purple, diamond clean/polish***
855904 red, buffing & cleaning
855905 white, polishing
Pads-Case of 10, 28 in x 14 in
875904 maroon, surface prep
875923 black, stripping
875922 purple, diamond clean/polish***
875905 red, buffing & cleaning
875921 white, polishing
545001 40 lb weight kit, 20 in
545003 dust control kit, 20 in
545005 solution tank kit
545002 60 lb weight kit, 28 in
545004 dust control kit, 28 in
545005 solution tank kit
WARRANTY
OPTIONAL ACCESSORIES
Available accessories:
*Productivity estimated at 1.0 & 0.5 mph with 2 in overlap
**Excluding wear items
***Sold as case of 5
Note: Specifications subject to change without notice
GENUINE SERVICE PARTS
PURPOSE BUILT™ TO PROVIDE MAX PERFORMANCE
Why buy a copy when you can get the original parts – the ones actually used
in the machine’s original design work the best. Not only do you get maximum
performance, but you also reduce hassle and downtime. Be sure to contact Pacific
Floorcare or a local authorized distributor when you need authentic service parts.
pacificfloorcare.com
(800) 968-1332