QuickSpecs
HP 2615-8-PoE Switch
Overview
Models
HP 2615-8-PoE Switch
J9565A
Key features
Scalable 10/100 connectivity
Layer 2 and 3 switching capabilities
sFlow, ACLs, and rate limiting
Energy-efficient design and quiet operation
Rack-mountable, compact form factor
Product overview
The HP 2615-8-PoE Switch is a fully managed 8-port 10/100 switch with an additional two dual-personality Gigabit
Ethernet ports for copper or SFP connectivity. Together with static and RIP IPv4 routing, robust security and management,
enterprise-class features, a free lifetime warranty, and free software updates, the HP 2615-8-PoE Switch is a cost-effective
solution. The HP 2615-8-PoE Switch is fanless, providing quiet operation and making it ideal for deployments in open
spaces. In addition, the compact form factor allows for flexible deployments, including wall, surface, or rack mounting.
These switches can be deployed at enterprise edge and remote branch offices, as well as converged networks.
Features and benefits
Quality of Service (QoS)
Selectable queue configuration: performance and/or traffic reliability can be increased by selecting the number of
queues that best meet the requirements of network applications; the switch will map 8 priorities to either 2 or 4
queues
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3
protocol, TCP/UDP port number, source port, and DiffServ
Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to four
queues
Rate limiting: per-port ingress-enforced maximums
Flow control: helps ensure reliable communications during full-duplex operation
Type of service:
IP precedence: honors IP precedence bits and allows mapping to a priority queue
Differentiated Services Code Point values: honors Differentiated Services Code Point (DSCP) bits and allows
mapping to a priority queue
Management
Choice of management interfaces:
Web graphical user interface (GUI): easy-to-use graphical interface allows configuration of the switch from any
Web browser
Command-line interface (CLI): robust command-line interface provides advanced configuration and
diagnostics
Simple Network Management Protocol (SNMPv2c/SNMPv3): allows switch to be managed with a variety of
third-party network management applications
Multiple configuration files: configuration file management tools allow up to three configuration files to be
managed and stored on the switch
Dual flash images: provide independent primary and secondary operating system files for backup while upgrading
Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network
administrator's login; also provides an audit trail
Front-panel LEDs:
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 1
QuickSpecs
HP 2615-8-PoE Switch
Overview
Locator LED: allows users to set the locator LED on a specific switch to either turn on, blink, or turn off;
simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
Per-port LEDs: provides an at-a-glance view of status, activity, speed, and full-duplex operation
Power and fault LEDs: power LED and fault LEDs display any issues
Integration with HP PCM: enables discovery, mapping, logging, and configuration via PCM, which is available as a
free download from the Web
Connectivity
Dual-personality functionality: two 10/100/1000 ports or SFP slots provide optional fiber connectivity such as
Gigabit-SX, -LX, -LH, 100-FX, 100-BX, and 1000-BX
IEEE 802.3af Power over Ethernet: provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered
devices such as IP phones, wireless access points, and security cameras (see product specifications for total PoE
power available)
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports
RJ-45 serial console port: provides easy accessibility on front of the unit to the switch CLI
IPv6:
IPv6 host: the switches can be managed and deployed at the edge of IPv6 networks
Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both
protocols
Single IP address management: single IP address management for a virtual stack of up to 16 switches
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing
multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
Port trunking and link aggregation:
Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections
IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic
configuration
Layer 2 switching
GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Layer 3 routing
Static IP routing: provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and
source/destination TCP/UDP port number
Identity-driven ACL: enables implementation of a highly granular and flexible access security policy and VLAN
assignment specific to each authenticated network user
Source-port filtering: allows only specified ports to communicate with each other
RADIUS/TACACS+: eases switch management security administration by using a password authentication server
Secure protocols for encryption of management traffic:
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote CLI access over IP networks
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based
management GUI in the switch
Secure FTP (SFTP): encrypts uploads and downloads of configuration file
Port security: allows access only to specified MAC addresses, which can be learned or specified by the
administrator
Dynamic IP lockdown: works with DHCP protection to block traffic from unauthorized hosts, preventing IP source
address spoofing
DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 2
QuickSpecs
HP 2615-8-PoE Switch
Overview
Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of
network data
MAC address lockout: prevents configured particular MAC addresses from connecting to the network
MAC address lockdown: allows only specified MAC addresses access to the network on a specified port
Multiple user authentication methods:
IEEE 802.1X: is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the
client in conjunction with a RADIUS server
Web-based authentication: similar to IEEE 802.1X, it provides a browser-based environment to authenticate
clients that do not support the IEEE 802.1X supplicant
MAC-based authentication: client is authenticated with the RADIUS server based on the client's MAC address
Authentication flexibility—2 IEEE 802.1X: provides authentication of multiple IEEE 802.1X users per port; prevents
user "piggybacking" on another user's IEEE 802.1X authentication
Protected ports: prevents designated ports from communicating with each other while allowing access to
unprotected ports
Per-port broadcast throttling: selectively configures broadcast control on heavy traffic port uplinks
Physical security:
Front-panel buttons: provides the ability to disable reset and clear buttons on front panel for added security
Kensington Lock slot: includes a Kensington Lock slot for securing the switches in open-space deployments
Spanning Tree Protocol Root Guard: when running the spanning tree protocol, protects root bridge from malicious
attacks or configuration mistakes
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs,
preventing forged BPDU attacks
Convergence
IP multicast snooping and data-driven IGMP: automatically prevent flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as
QoS and VLAN to automatically configure network devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol that provides
easy mapping of network management applications
PoE allocations: support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to
allocate PoE power for more efficient energy savings
Monitor and diagnostics
Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Network tools: command-line interface includes telnet client, ping, traceroute, and Layer 2 link test tools for
diagnostics
Logging: local and remote logging of events via SNMP (v2c and v3) and syslog
Troubleshooting: ingress and egress port monitoring enable network problem solving
Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of
the link if the link goes down at any point between the two devices
Find-Fix-Inform: finds and fixes common network problems automatically, then informs the administrator
RMON, XRMON, sFlow, and SMON: provide advanced monitoring and reporting capabilities for statistics, history,
alarms, and events
Port monitoring for network threats: provides sampled port traffic using sFlow technology to the HP Network
Immunity Manager application for Network Behavior Anomaly Detection (NBAD) analysis to detect threats and
mitigate threats at the port where they originated
Flexibility
Flexible mounting:
Rackable: can be mounted in a standard 19-inch rack with included hardware
Wall mountable: allows the switch to be mounted to a wall using included hardware
Surface mountable: allows the product to be mounted above or below a surface (such as a desk or table) with
included hardware
Compact size: product is designed to reduce space requirements (see product specifications for exact dimensions)
NEW Power supply clip: provides the ability to attach or detach the power supply to the device, allowing for either
an integrated solution or a separate one, depending on deployment requirements
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 3
QuickSpecs
HP 2615-8-PoE Switch
Overview
Product Architecture
Energy-efficient design:
Fans: fanless design helps reduce power consumption
Port LEDs: port link and activity LEDs can be turned off to conserve energy
Port low-power mode option: when no link is detected on a port, the port will automatically go into low-power
mode to conserve energy
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)†
Electronic and telephone support: limited electronic and telephone support is available from HP; to reach our
support centers, refer to: www.hp.com/networking/contact-support; for details on the duration of support provided
with your product purchase, refer to: www.hp.com/networking/warrantysummary
Software releases: to find software for your product, refer to: www.hp.com/networking/support; for details on the
software releases available with your product purchase, refer to: www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day
advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and
Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed
Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft
Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at:
www.hp.com/networking/warranty.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 4
QuickSpecs
HP 2615-8-PoE Switch
Technical Specifications
HP 2615-8-PoE Switch (J9565A)
Included accessories 1 HP X520 1U Power Adapter Shelf (J9701A)
Ports
8 RJ-45 autosensing 10/100 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3af PoE); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3
Type 10Base-T; an IEEE 802.3u Type 100Base-TX; an IEEE 802.3ab 1000Base-T Gigabit
Ethernet); or an SFP slot (for use with SFP transceivers)
1 RJ-45 serial console port
Physical
Dimensions
6.28(d) x 10(w) x 1.75(h) in. (15.95 x 25.4 x 4.45 cm) (1U height)
characteristics
Weight
3.66 lb. (1.66 kg) including power adapter and power cord
Memory and processor Processor
Freescale PowerPC 8313 @ 333 MHz, 32 MB flash, 128 MB DDR2
SDRAM; packet buffer size: 512 KB dynamically allocated
Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet; horizontal surface mounting;
wall mounting
Performance
100 Mb Latency
< 5.3 µs (LIFO 64-byte packets)
1000 Mb Latency
< 2.7 µs (LIFO 64-byte packets)
Throughput
4.1 million pps
Environment
Electrical
characteristics
Safety
Switching capacity
5.6 Gbps
MAC address table size 8000 entries
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 15% to 95% @ 149°F (65°C), noncondensing
temperature
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB, Pressure: 0 dB
Description
Use only the external power adapter module (5070-6082, PA1 AC
adapter) supplied with this product
Maximum heat
87 BTU/hr (91.79 kJ/hr)
dissipation
Voltage
100-240 VAC
Current
1.5 A
Idle power
11 W
Maximum power rating86 W
PoE power
67 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE power is the total power budget available to all PoE ports.
cUL (CSA 22.2 No. 60950); CE Labeled; UL 60950-1; UL Listed; CAN/CSA 22.2 No. 60950; EN
60825; AS/NZS 60950; IEC 60950-1; EN 60950-1
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 5
QuickSpecs
HP 2615-8-PoE Switch
Technical Specifications
Emissions
Immunity
Management
Notes
Services
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 (Canada);
AS/NZS CISPR 22; IEC/EN 61000-3-2; IEC/EN 61000-3-3; IEC 61000:4-2, 4-3, 4-4, 4-5, 4-6, 4-8,
4-11
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-ofband management (serial RS-232C); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface
MIB
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number
ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
This product comes with a power supply clip adapter. The adapter dimensions are 1.7(d) x 10.7(w)
x 3.8(h) in. (4.35 x 27.25 x 9.6 cm). The weight of the power supply clip adapter is .31 lb (.14 kg).
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing (U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 6
QuickSpecs
HP 2615-8-PoE Switch
Technical Specifications
(HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
Standards and
protocols
Denial of service protection
Automatic Filtering of well known Denial of
Service
Packets
Device management
RFC 1591 DNS (client)
Multiple Configuration Files
Multiple Software Images
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
MIBs
RFC 1213 MIB II
General protocols
RFC 1493 Bridge MIB
IEEE 802.1D MAC Bridges
RFC 2021 RMONv2 MIB
IEEE 802.1p Priority
RFC 2613 SMON MIB
IEEE 802.1Q VLANs
RFC 2618 RADIUS Client MIB
IEEE 802.1s Multiple Spanning Trees
RFC 2620 RADIUS Accounting MIB
IEEE 802.1w Rapid Reconfiguration of Spanning RFC 2665 Ethernet-Like-MIB
Tree
RFC 2668 802.3 MAU MIB
IEEE 802.3 Type 10BASE-T
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
IEEE 802.3ab 1000BASE-T
RFC 2737 Entity MIB (Version 2)
IEEE 802.3ad Link Aggregation Control Protocol RFC 2863 The Interfaces Group MIB
(LACP)
IEEE 802.3af Power over Ethernet
Network management
IEEE 802.3u 100BASE-X
IEEE 802.1AB Link Layer Discovery Protocol
IEEE 802.3x Flow Control
(LLDP)
RFC 768 UDP
RFC 1098 A Simple Network Management
RFC 783 TFTP Protocol (revision 2)
Protocol
RFC 792 ICMP
(SNMP)
RFC 793 TCP
RFC 2819 Four groups of RMON: 1 (statistics),
RFC 826 ARP
2
RFC 854 TELNET
(history), 3 (alarm) and 9 (events)
RFC 868 Time Protocol
RFC 3176 sFlow
RFC 951 BOOTP
SNMPv1/v2c/v3
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
QoS/CoS
RFC 1723 RIP v2
RFC 2474 DiffServ precedence, with 4 queues
RFC 1812 IPv4 Routing
per
RFC 2030 Simple Network Time Protocol
port
(SNTP) v4
RFC 2475 DiffServ Architecture
RFC 2131 DHCP
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2453 RIPv2
RFC 2598 DiffServ Expedited Forwarding (EF)
UDLD (Uni-directional Link Detection)
Ingress Rate Limiting
IP multicast
RFC 3376 IGMPv3 (host joins only)
Security
IEEE 802.1X Port Based Network Access
Control
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 7
QuickSpecs
HP 2615-8-PoE Switch
Technical Specifications
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2925 Remote Operations MIB (Ping only)
RFC 3315 DHCPv6 (client only)
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 4022 MIB for TCP
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Access Control Lists (ACLs)
MAC Authentication
MAC Lockdown
MAC Lockout
Port Security
Secure Sockets Layer (SSL)
Web Authentication
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 8
QuickSpecs
HP 2615-8-PoE Switch
Accessories
HP E2615-8-PoE
Switch accessories
Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
HP 1 m PremierFlex OM3+ LC/LC Optical Cable
HP 2 m PremierFlex OM3+ LC/LC Optical Cable
HP 5 m PremierFlex OM3+ LC/LC Optical Cable
HP 15 m PremierFlex OM3+ LC/LC Optical Cable
HP 30 m PremierFlex OM3+ LC/LC Optical Cable
HP 50 m PremierFlex OM3+ LC/LC Optical Cable
Mounting Kit
NEW HP X510 1U Cable Guard
Software
HP Identity Driven Manager v3 Software with 500-user License
HP Identity Driven Manager v3 Software with Unlimited-user License
NEW HP PCM+ Identity Driven Manager v4 Software Module with 500-user
License
NEW HP PCM+ Identity Driven Manager v4 Software Module with Unlimiteduser License
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
J4858C
J4859C
J4860C
J9054B
J9099B
J9100B
J9142B
J9143B
AJ833A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
J9700A
J9438A
J9439A
J9752A
J9753A
Page 9
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X121 1G SFP LC SX Ports
Transceiver (J4858C) Physical
characteristics
A small form-factor
pluggable (SFP) Gigabit Environment
SX
transceiver that provides
a full-duplex Gigabit
solution
Electrical
up to 550 m on
characteristics
multimode fiber.
Cabling
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
Services
HP X121 1G SFP LC LX Ports
Transceiver (J4859C)
Physical
HP X121 1G SFP LC LX characteristics
Transceiver: An SFP
Environment
format
gigabit transceiver with
LC connectors using LX
technology.
Cabling
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex:
full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Type:
Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 10
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
Notes
Services
HP X121 1G SFP LC LH Ports
Transceiver (J4860C)
Physical
A small form-factor
characteristics
pluggable (SFP) Gigabit Environment
LH transceiver that
provides a full-duplex
Gigabit solution up to 70
km on single-mode fiber.
Cabling
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode
fiber installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics);
Duplex: full only
Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Cable type:
Low metal content, single-mode fiber-optic, complying with ITU-T
G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:
Notes
Services
10-70,000 m (single-mode fiber)
Power consumption is 0.8 watts typical with 1 watt maximum at 100%
utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be
used.
Attenuators can be purchased from most cable vendors.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 11
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP X111 100M SFP LC Ports
FX Transceiver
(J9054C)
Physical
characteristics
HP X111 100M SFP LC Environment
FX Transceiver: An SFP
format 100-megabit
transceiver with LC
connectors using FX
technology.
Cabling
Notes
Services
HP X112 100M SFP LC Ports
BX-D Transceiver
(J9099B)
Physical
characteristics
A small form-factor
pluggable (SFP) 100Environment
Megabit BX (bidirectional)
"downstream"
transceiver that provides
100 Mbps full-duplex
connectivity up to 10 km
Cabling
on one strand of
singlemode fiber. The
J9099B connects to the
J9100B "upstream"
transceiver, or to any
IEEE-standard
100BASE-BX10-U
Notes
("upstream") device.
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half
or full
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to
support this product, see the document titled "Support for the J9054B
100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs"
Manuals Web page.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D);
Duplex: full only
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x
1.22 cm)
Weight
0.04 lb. (0.03 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, noncondensing
humidity
Nonoperating/Storage -40ºF to 185ºF (-40ºC to 85ºC)
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX
Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any
IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D
transceiver can only connect to a 100-BX-U product. You cannot
connect two 100-BX-D transceivers together.)
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 12
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
Services
HP X112 100M SFP LC Ports
BX-U Transceiver
(J9100B)
Physical
characteristics
A small form-factor
pluggable (SFP) 100Environment
Megabit BX (bidirectional) "upstream"
transceiver that provides
100 Mbps full-duplex
connectivity up to 10 km
on one strand of
Cabling
singlemode fiber. The
J9100B connects to the
J9099B "downstream"
transceiver, or to any
IEEE-standard
100BASE-BX10-D
("downstream")
Notes
device.
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U);
Duplex: full only
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x
1.22 cm)
Weight
0.07 lb. (.03 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, noncondensing
humidity
Nonoperating/Storage -40ºF to 185ºF (-40ºC to 85ºC)
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX
Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to
any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100BX-U transceiver can only connect to a 100-BX-D product. You cannot
connect two 100-BX-U transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 13
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP X122 1G SFP LC
BX-D Transceiver
(J9142B)
Ports
Physical
characteristics
A small form-factor
pluggable (SFP) GigabitEnvironment
BX (bi-directional)
"downstream"
transceiver that provides
a full-duplex Gigabit
solution up to 10 km on
one strand of singlemode fiber. The J9142B Cabling
connects to the J9143B
"upstream" transceiver,
or to any IEEE-standard
1000BASE-BX10-U
("upstream") device.
Notes
Services
HP X122 1G SFP LC
BX-U Transceiver
(J9143B)
Ports
Physical
characteristics
A small form-factor
pluggable (SFP) GigabitEnvironment
BX (bi-directional)
"upstream" transceiver
that provides a fullduplex Gigabit solution
up to 10 km on one
strand of single-mode
Cabling
fiber. The J9143B
connects to the J9142B
"downstream"
transceiver, or to any
IEEE-standard
1000BASE-BX10-D
Notes
("downstream")
device.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D);
Duplex: full only
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
1.18 cm)
Weight
0.04 lb. (0.02 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, non-condensing
humidity
Non-operating/
–40ºF to 185ºF –40ºC to 85ºC)
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX
Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D
transceiver can only connect to a 1000-BX-U product. You cannot
connect two 1000-BX-D transceivers together.)
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U);
Duplex: full only
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
1.18 cm)
Weight
0.04 lb. (0.02 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, non-condensing
humidity
Non-operating/
–40ºF to 185ºF –40ºC to 85ºC)
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX
Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to
any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A
1000-BX-U transceiver can only connect to a 1000-BX-D product. You
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 14
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
Services
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Services
cannot connect two 1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 15
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP 0.5 m PremierFlex Notes
OM3+ LC/LC Optical
Cable (BK837A)
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also
has a longitudal white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 16
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 17
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 18
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Services
HP X510 1U Cable
Guard (J9700A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Dimensions:10.94" x 3.62" x 1.69" or 27.8cm x 9.2cm x 4.3cm w/ears
10.94" x 1.69" x 1.69" or 27.8cm x 4.3cm x 4.3cm without ears
Weight: 1.262 lbs or .57 kg (including faceplate, ears, and screws)
1.026 lbs or .47 kg (faceplate only)
Refer to the HP website at: www.hp.com/networking/services for details
HP Identity Driven
Identity Driven Manager 3.0 software and license for managing up to 500 users.
Manager v3 Software
with 500-user License
RADIUS server support Microsoft Network Policy Server on Windows Server 2008 (32-bit)
(J9438A)
Microsoft Internet Authentication Service (IAS) on Windows Server 2003
(32-bit)
FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.2)
RADIUS on the Network Access Controller 800
FreeRADIUS supplied with SuSE Linux Enterprise Server (9.3 and 10.2)
Features
Intuitive Explorer-style interface
OpenView NNM integration
Application of policies by user identity
Auto VLAN assignment
Auto set quality of service by user
Auto set bandwidth assignment by user
Rule-based access rights deployment
Dynamic rights assignment based on:
Time
Location
User system
Auto-discovery of:
RADIUS servers
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 19
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
Notes
Realms
Users
Additional specifications
Supports environments with up to 10,000 users.
Supports up to 10 RADIUS servers with HP Identity Driven
Manager agents installed.
Requires the HP PCM Plus 3.0 or greater network management
platform.
Services
Please see HP PCM Plus 3.0 for hardware and software system
requirements.
3-Year, 9x5 SW phone support, software updates (UQ124E)
3-year, 24x7 SW phone support, software updates (UQ125E)
Refer to the HP website at www.hp.com/networking/services for details
on the
service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP Identity Driven
Manager v3 Software
with Unlimited-user
License (J9439A)
Identity Driven Manager 3.0 software and license for managing an unlimited number of
users.
RADIUS server support Microsoft Network Policy Server on Windows Server 2008 (32-bit)
Microsoft Internet Authentication Service (IAS) on Windows Server 2003
(32-bit)
FreeRADIUS supplied with Red Hat Enterprise Linux (4.7 and 5.2)
RADIUS on the Network Access Controller 800
FreeRADIUS supplied with SuSE Linux Enterprise Server (9.3 and 10.2)
Features
Intuitive Explorer-style interface
OpenView NNM integration
Application of policies by user identity
Auto VLAN assignment
Auto set quality of service by user
Auto set bandwidth assignment by user
Rule-based access rights deployment
Dynamic rights assignment based on:
Time
Location
User system
Auto-discovery of:
Notes
RADIUS servers
Realms
Users
Additional specifications
Supports environments with up to 10,000 users.
Supports up to 10 RADIUS servers with HP Identity Driven
Manager agents installed.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 20
QuickSpecs
HP 2615-8-PoE Switch
Accessory Product Details
Requires the HP PCM Plus 3.0 or greater network management
platform.
Services
Please see HP PCM Plus 3.0 for hardware and software system
requirements.
3-year, 24x7 SW phone support, software updates (UQ133E)
3-Year, 9x5 SW phone support, software updates (UQ132E)
Refer to the HP website at www.hp.com/networking/services for details
on the
service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2010-2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to
change without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13673 Worldwide QuickSpecs — Version 7 — 4.17.2012
Page 21