PRODUCT CATALOGUE
International Edition
Lubricants, Chemicals & Fuels
ORDER NOW sales@stealthgi.com
www.stealthgi.com
Lubricants, Chemicals & Fuels
ANTI-SEIZE............................................................................... 435
CUTTING FLUIDS.................................................................... 436
FUEL NOZZLES........................................................................ 438
GREASES.................................................................................. 438
GREASE GUNS........................................................................ 439
LUBRICANTS........................................................................... 444
OIL WASTE............................................................................... 452
DRUM PUMPS......................................................................... 454
ORDER NOW sales@stealthgi.com
www.stealthgi.com
Lubricants, Chemicals & Fuels
ANTI-SEIZE COMPOUNDS
®
GOG
Molybond GOG is a lead free,
heat and water resistant lithium based grease containing lubricating solids
including molybdenum disulphide and copper. It is based on a high viscosity
oil and formulated to NLGI No. 2 consistency to effectively lubricate sliding
surfaces operating under heavy loads at low speeds in wet, hot or dusty
conditions. It is recommended as a thread lubricant for the arduous conditions
in the earth moving and drilling industry.
Part Number
Description
Size
Nickel Anti-Seize
Rocol Nickel Anti-Seize Compound is formulated to prevent seizure of
threaded components which are subjected to extremely high temperatures or
adverse environmental conditions for long periods of time. It contains
lubricating solids to prevent galling and seizure during assembly or dismantling
under heavy loads.
RP351587
GOG/1 Pumpable Anti Seize and Drill Coupling
Lubricant
20kg
RP351072
GOG Anti Seize and Drill Coupling Lubricant
2.5kg
RY480450
Nickel Anti Seize Compound for Stainless Steel
500g
RP351087
GOG Anti Seize and Drill Coupling Lubricant 20kg
20kg
RY480455
Nickel Anti Seize Spray for Stainless Steel
350g
Anti-Seize
Rocol Copper Anti-seize is a soft paste containing finely divided, friction
reducing solids including copper, graphite and molybdenum disulphide.
The complex blend is designed to prevent seizing and galling of threads and
other mating surfaces in corrosive conditions or where high temperature or
vibration is of concern.
Part Number
Description
Part Number
Description
Size
Stop Seize
This product is a heavy duty, high
temperature, water repelling compound that protects against locking and cold
welding of metal parts. It is used for the protection of carbon steel components
found in all facets of engineering and operates in environments up to 1090°C.
Size
Part Number
Description
Size
RY480431
Copper Anti Seize Compound
500g
D19030
Devcon Stop Seize Nickel Anti Seize Brush Top
500gm
RY482482
Copper Anti Seize Spray
300g
D19020
Devcon Stop Seize Copper Anti Seize Brush Top
500gm
435
ORDER NOW sales@stealthgi.com
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
CORROSION PROTECTION
CUTTING FLUIDS / OILS
U.P.
Lanotec U.P. is the ultimate in corrosion protection
in highly corrosive/acidic environments, preserving
and extending the life of your assets.
Part Number
Description
UP\SP-0750
U.P.
Size
750ml Spray
UP\0004
U.P.
5 Litre Bottle
Cutting Fluids & Lubricants
UP\0020
U.P.
20 Litre Drum
Goliath stocks a range of Relton Neat Cutting Oils and Water Soluble Cutting
Fluids. Cutting fluids extend the life of taps and dies by lubricating the cutting
edges and aid in the removal of swarf in machine applications. Cutting fluids /
coolants also aid in reducing heat build up on the cutting edge.
•
•
•
•
No-Rust Shield (90 days)
Relton Rapid Tap range – from 118ml to 20 litre containers.
Paste containers 236ml.
Relton Aluminium A9 Range – from 118ml to 20 litre containers
Water Soluble Cutting Fluid – available in 1, 5 and 20 Litre.
•Small, compact and great for use in tool boxes,
tackle boxes, etc. to protect against rust.
•Keeps tools and equipment like new
Product Code: 11075
Lightning Tool Tonic Cutting Fluid
and Metal Conditioner
CUTTING & TAPPING COMPOUND
•
•
•
•
•
•
Trefolex Cutting Compound
100% natural lanolin and fatty acid based
Added eucalyptus oil for maximum penetration
Protect and improve the cutting edge
Conditions and protects all cutting equipment
Natural lubrication properties
Cooler, smoother, reduced friction makes for safer,
quicker and better results when drilling and cutting
Trefolex is a green coloured, active cutting
compound containing a colloid. It melts slowly
as frictional heat is generated. It maintains efficient lubrication throughout
operations such as pipe screwing, hack sawing, tapping, reaming, etc.
It is suitable for all users of hand tools.
Part Number
Size
116S
750ml
Trefolex prolongs the life of the tool. It will not corrode steel nor affect
aluminium. Although the surface of copper and brass is darkened, the metal
suffers no detrimental effect. It is ideal for use with stainless steel.
Part Number
Description
Size
3060
Cutting and Tapping Compound - Tub
500mL
3061
Cutting and Tapping Compound - Tub
2L
Ultracut Longlife & Clear
Rocol Ultracut Longlife is a high quality heavy duty, water dilutable mineral
soluble cutting oil formulated to give exceptionally long fluid life, good cutting
performance and excellent corrosion resistance. It is suitable for medium/
severe duty machining on a wide range of ferrous and non-ferrous metals
including copper alloys.
Soluble Cutting Oil
Premium quality, chlorine free, borate containing
soluble cutting oil, designed for light to moderate
machining operations including boring, milling,
drilling, tapping, threading, broaching, turning,
reaming and grinding.
Part Number
HI6-2910-0005
Description
Soluble Cutting Oil
Part Number
5L
Size
Ultracut Long Life Heavy Duty Metal Cutting Fluid
20 Litre
RY563015
Ultracut Long Life Heavy Duty Metal Cutting Fluid
205 Litre
RY561411
Size
Description
RY563011
RY561421
Ultracut Clear High Dilution Semi Synthetic
Metal Cutting Fluid
Ultracut Clear High Dilution Semi Synthetic
Metal Cutting Fluid
20 Litre
205 Litre
HI6-2910-0020
Soluble Cutting Oil
20L
RY562611
Ultracut Premium High Performance Mineral Soluble Oil
5 Litre
HI6-2910-0200
Soluble Cutting Oil
200L
RY562621
Ultracut Premium High Performance Mineral Soluble Oil
20 Litre
436
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
Safetap Liquid
Tap-Magic Xtra-Thick
®
A unique blend of synthetic additives in a waterbased tapping fluid, Rocol SafeTap Liquid improves
tool life and thread surface finish in tapped holes
whilst providing the machinist with a safe and clean
environment. It provides the cooling properties of a
water soluble coolant with the cutting performance of a neat oil.
Part Number
Description
The extreme performance heavyweight cutting fluid for the
hardest metals up to 45 RC. Excellent results on Stainless Steel.
Part Number
Size
70016T
472ml
Size
RY19122
Safetap Liquid, Reaming, Drilling, Tapping
500ml
RY19131
Safetap Liquid, Reaming, Drilling, Tapping
5 Litre
Trefolex HD Cutting Fluid
Trefolex HD Cutting Fluid is an extreme duty cutting fluid. It is a
thick fluid that sticks to the cutting tool throughout the operation.
Considered environmentally safe. This fluid is ideal for tapping
and drilling stainless steel, carbon steel, inconel, monel, hastelloy,
titanium, aluminium and other alloys and exotics.
Lubricating Fluid
For Cutting, Tapping & Drilling
Part Number
3065
Description
HD Cutting Fluid
Size
500mL
Lubricating Fluid is a medium viscosity metal cutting liquid
for use in reaming, tapping, drilling and other metal cutting
operations.
Three major problem areas are addressed when you use
Sutton Tools Lubricating Fluid has been specifically
formulated to:
• Dissipate heat from both the tool work piece
• Act as a lubricant between the tool and the work piece
• Extend tool and die life by reducing wear
• Improves thread and surface finish
• Removes swarf from the cutting edge
• Flows to cutting edge
• Excellent penetration into deep holes and slots application
For use with holesaws, drills, taps, reamers and general metal machining
applications. Apply Lubricating Fluid to work piece prior and during machining
process.
Trefolex AL Cutting Fluid
Trefolex AL Cutting Fluid is a solvent based cutting fluid.
It delivers equivalent performance without being labelled as
a suspected ozone-depleting agent. Designed to provide
superior lubricity and cooling in cutting aluminium and its
alloys. Evaporates quickly, leaves little residue and provides
excellent finishes.
Part Number
3067
Description
AL Cutting Fluid
Size
500mL
Part No. M8000250
Trefolex C.D.T. Cutting Oil
Trefolex C.D.T. Cutting Oil is ideal for the critical machining of
non-ferrous metals for all operations in Machinability *Group 1
(except those such as deep drilling where low viscosity oil is
required) and less critical operations in Machinability *Group 2.
Trefolex C.D.T. Cutting Oil leaves an anti-corrosive residue.
Part Number
Description
Size
3063
C.D.T. Cutting Oil - Aerosol
300g
FUEL - FILTER
Tap-Magic with EP-Xtra
®
Outstanding performance for any cutting operation on any metal.
Part No.
Size
10004E
120ml
Fuel Filter
10016E
472ml
10012EL
354g
10050E
5lt
10025E
• Fuel filter suitable for use with gravity or with hand,
air or electric drum pumps
• Features a 10 micron fuel filter element, a drain cock and
a replaceable clear plastic bowl
• 1”BSP inlet and outlet
• Replacement elements readily available
25lt
Part Number: FA2N
ORDER NOW sales@stealthgi.com
437
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
FUEL NOZZLES - AUTOMATIC
Fuel Filter (10µm)
•
•
•
•
Auto Shutoff Fuel Nozzle
Inlet: 1” BSPP (RP); Outlet: 1” BSPP (RP),
supplied without fittings
Usable together with DM100 Mechanical Fuel Meter (above)
Body material: zinc
Housing material: petrol resistant nylon
• Automatically cuts off when a fuel tank is full
• 1”BSP swivel included
• Suitable for applications involving a pump only
Part Number
Item Code: HA1S-01
Description
51037
Can operate with flow rates up to 60 LPM
51039
Can operate with flow rates up to 120 LPM
FUNNELS
AdBlue Automatic Nozzle
• Automatically shuts off when the tank is full
• Flow rates of up to 20LPM
• Strong stainless steel housing encased in rubber nozzle shroud
• Lever protection prevents accidental dispensing
• 3/4” BSP (f) inlet swivel included
Part Number: 619032
Clean Funnels
• Screw down caps at both ends of the funnels ensure that
they are contaminant free for the next time you need to use them
Part Number
FUEL NOZZLES - MANUAL
Description
10430CF
1420ml capacity
10350CF
1420ml capacity
Manual Fuel Nozzle
10270CF
1180ml capacity
10220CF
450ml capacity
• Capable of flow rates up to 150LPM
• Suitable for gravity feed applications and applications
including pressures of up to 140psi
• Hanging clip helps to reduce the possibility of fuel contamination
• 1”BSP swivel included
Part Number
Smart Funnels
• Heavy duty polypropylene construction
• With special contours in the funnel body
for easy handling
• Complete with wire mesh screen, dust cover
and flexible spout
Part Number
Capacity
Diameter
Spout Length
305388
1.7 Litre
205mm
170mm
305389
3 Litre
240mm
245mm
Description
52007
Diesel Fuel
52155
Unleaded petrol
AdBlue Manual Nozzle
• Highly efficient with low flow resistance
• Flow rates of up to 80LPM
• Features include lever protection and a removable trigger lock
• 3/4” OD hose tail
• Can be locked in the open position
Part Number: 147610
FUEL NOZZLES
GREASE - BEARING
ANHF
Lithplex TAC Grease
Fuel Nozzles
Item Code
MNL
Model
Inlet/Outlet (BSP)
Flow Rate
Lithium complex tacky grease providing excellent lubrication for a wide range
of anti-friction and plain bearings, wheel bearings, gears,and couplings in
automotive, marine, agricultural, earth moving, and industrial applications.
Blue in colour.
Manual
1” x 1”
up to 70L/min
High Flow
1 1/2” x 1 5/8”
up to 260 L/min
Part Number
Size
Part Number
Size
ANL
Automatic
1” x 3/4”
Outlet Adapt incl. 1”
up to 60 L/min
HI7-1005-00045
450g
HI7-1005-020
20kg
ANHF
High Flow
1 x 1 3/16”
up to 120 L/min
with trigger latch
HI7-1005-0005
500g
HI7-1005-055
55kg
HI7-1005-0025
2.5kg
HI7-1005-180
180kg
MNHF
438
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
GREASE - TYPE ‘A’
®
Bearing Greases
Rocol and Molybond greases are suitable for use in both anti-friction and plain
roller bearings used in all types of operating conditions such as high load, wet
and dusty environments. Applications include general plant, high temperature,
marine and heavy duty earth moving equipment.
Part Number
Description
Size
RY424031
Sapphire Aqua Bearing Grease
450g
RK353857
Opal Hi Load Bearing Grease
450g
RY424851
Sapphire Ultraplex Bearing Grease
450g
RL355957
Opal Pin & Bush Grease
450g
RY424001
Sapphire Hi Temp Bearing Grease
400g
GREASE - LITHIUM
Type “A” Grease
Pure natural lanolin, a unique natural substance
produced by sheep to form a coating on wool
fibres to protect them against the elements.
Part Number
GS\250T
Description
Size
Type “A” Grease
250ml Tube
GS\0235
Type “A” Grease
235ml Tub
GS\0500
Type “A” Grease
500ml Tub
GS\0001
Type “A” Grease
1 Litre Tub
GS\0004
Type “A” Grease
4 Litre Tub
GS\0020
Type “A” Grease
20 Litre Drum
GREASE CONTROL VALVES
Super Molytac Grease
Lithium complex grease with 3% molybdenum disulphide and extra tackifier
suitable for use in ball joints, king pins, hammers. etc. Black in colour.
Part Number
Description
Size
HI7-1007-00045
Super Molytac Grease
450g
HI7-1007-0005
Super Molytac Grease
500g
HI7-1007-0025
Super Molytac Grease
2.5kg
HI7-1007-020
Super Molytac Grease
20kg
HI7-1007-055
Super Molytac Grease
55kg
HI7-1007-180
Super Molytac Grease
180kg
White Lithium Grease 300g
Part Number: 413081
GREASE - SILICONE
GREASE GUNS - AIR OPERATED
Sapphire Silicone
This is a clear silicone based, non-melting grease that is suitable for long term
lubrication at extremes of temperatures. It is highly resistant to chemicals, oils and
gases and suitable as an electrical insulating or filling compound (O-Ring grease).
ORDER NOW sales@stealthgi.com
Part Number: 6320-3
• Standard duty grease control valve
with flexible extension and heavy duty 3 jaw coupler
• Ergonomic design
• 1/4” BSP (f) inlet thread
• Grease pressures of up to 7,000psi
Product Code: 11063
Description
Sapphire Silicone Grease (MX22)
Silicone Lubricant Spray (SL)
Sapphire Silicone Grease (MX22)
Sapphire Silicone Grease (MX22)
• Heavy duty grease control valve capable
of continuous flow or preset measured shots
• 1/4” NPT (f) inlet thread
• Grease pressures of up to 7,500psi
• The USA’s industry standard grease control valve
Grease Control Valve
•Prevents rust and corrosion
• L
ong-lasting
•Heavy duty lubricant
•Water and heat resistant
•High water resistance
•Lubricates metal to metal and plastic to metal
Part Number
RY421515
RY502452
RY421510
RY421520
Grease Control Valve
Size
120g
250g
500g
2.5kg
Air Operated Grease Gun
• Pressure ratio of 40:1
• Develops grease pressures of up to 3,920psi
• Suits 450 gram cartridge or bulk grease
• Recommended maximum air pressure of 98psi
• Continuous flow or single shot operation
• Suitable for grease up to NLGI2
• Flexible extension length: 50cm
Part Number: 680AN
439
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
Air Operated Grease Gun
• Pressure ratio of 40:1
• Develops grease pressures of up to 6,000psi
• Continuous grease flow ensures effortless greasing
• Three way loading
• Exclusive air piston design ensures consistent priming
• Suits 450 gram cartridge or bulk grease
• Includes a 300mm long grease gun flex and four jaw coupler
Part Number: G10030
POWERGUN™ 12V Battery Operated
Grease Gun
•
•
•
100g per minute flow rate
Up to 3 cartridges per charge
Includes extra long extension, KY SUPERGRIP™ grease coupler, carry case and spare battery
* Also available 400g version
Item Code: BG100-01
GREASE GUNS - LEVER
POWERPISTOL™ Air Powered Grease Gun 450g
•
•
•
•
One handed, single shot trigger operation; approx. 0.7g per shot
Low air consumption: inexpensive to operate and environmentally friendly
Max. pressure: 34,500 kPa (5,000 psi)
Includes 230mm flexible e
xtension, KY SUPERGRIP™ coupler
* Also available 400g version
Item Code: K53-01
GREASE GUNS - CORDLESS
Lever Action Grease Gun
•
•
•
•
•
Develops grease pressures of up to 10,000psi
500cc capacity when using bulk grease
Three way loading
Unique follower cup design makes the gun suitable for
use with both 450 gram cartridges and bulk grease
– without needing to change the orientation of the
follower cup
Includes a 150mm long grease rigid extension and heavy
duty four jaw coupler
Part Number: G10020
Lever Action Grease Gun
14.4V Cordless Grease Gun
• Generates grease pressures up to 10,000psi
• Capable of delivering rates of up to 140 grams per minute
• One hour fast charger, spare battery, cartridge holder, long
grease gun flex, heavy duty coupler and plastic moulded carry case
supplied standard
• Can be used to dispense grease from eight 450 gram cartridges before changing over or recharging of the battery is required
• Ideal for high volume applications requiring high pressure greasing
Part Number: 670AN
•
•
•
•
•
•
•
Develops grease pressures up to 12,000psi
Delivers up to 1.6cc of grease per stroke
Unique Twin Lock System eliminates the possibility
of dummy lubrication
Coarse thread on barrel assembly eliminates the
possibility of cross threading during cartridge change over
Patented Ever-Flow System enables the gun to handle
thick biodegradable greases even at low temperatures
Large diameter piston with a long lever travel facilitates
high volume greasing
High volume, high pressure greasing guaranteed
Part Number: 600A
18V Cordless Grease Gun
• Develops grease pressures of up to 10,000psi
• Delivery rates of up to 80 grams per minute
• Can be used with up to four 450g cartridges before
recharging or battery changeover is required
• 75 minutes battery recharge time
• 75 minutes fast charger, spare battery, cartridge holder, long grease
gun flex, h
eavy duty coupler and plastic moulded carry case supplied standard
440
Part Number: G10040
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
LEVERGUN™ Lever Action Grease Gun
• Suits 450g grease cartridges
• Max. pressure: 69,000 kPa (10,000 psi)
• Includes 170mm rigid extension and KY SUPERGRIP™ grease coupler
*Also available 400g version
Item Code: K45-01
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
GREASE GUNS - TRIGGER
KY SUPERGRIP™ Hydraulic Grease Coupler
Trigger Action Grease Gun
•
•
•
•
•
•
Develops grease pressures up to 8,500psi
Delivers up to 1.1cc of grease per stroke when
on the high volume setting
Unique Twin Lock System eliminates the possibility
of dummy lubrication
Patented Ever-Flow System enables the gun to be
used with thick tacky g
reases even at low temperatures
High volume/high pressure setting
One hand operation, 4 jaw coupler and flexible 30cm long extension makes light work of arduous greasing applications
Part Number: 660AN
Trigger Action Grease Gun
• Develops grease pressures of up to 6,000psi
• 500cc capacity when using bulk grease
• Three way loading
• Unique follower cup design makes the gun
suitable for u
se with both 450 gram cartridges
and bulk grease – without needing to change the
orientation of the follower cup
• Includes a 300mm long grease gun flex and heavy duty four jaw coupler
•
•
•
Superior 3 jaw design with larger jaws, greater contact a
rea on the grease nipple; ensures maximum grip and better sealing
Seals at an angle of up to 10°, according to internationally recognised
SAE standards
1/8” BSP thread
*Also available in handy 8 pack (KY-8)
Item Code: KY
GREASE GUN - EXTENSION
Grease Swivel
• Heavy duty, three way swivel
• 1/4” BSP m x f threads
• Grease pressures of up to 7,000psi
• Manufactured in Spain
Part Number: 414300
Part Number: G10010
Flexible Grease Gun Extensions
• Industrial quality flexible grease gun extensions for heavy duty applications
Part Number
Description
14551
300mm long polyamide flexible extension
14552
450mm long polyamide flexible extension
14553
700mm long polyamide flexible extension
FLEXIGUN® Pistol Grip Grease Gun
•
•
•
Suits 450g grease cartridges
Max. pressure: 52,000 kPa (7,500 psi)
Includes 230mm flexible extension and
KY SUPERGRIP™ grease coupler
GREASE HEADER BLOCKS
* Also available 400g version
* Also available in carry case with spare 450g FLEXIBLUE® grease (K29-12)
* Also available zinc version suitable for u
nderground mines (K29Z)
Item Code: K29-01
GREASE GUN - COUPLERS
Header Blocks
Grease Gun Couplers
• Industrial quality couplers for hydraulic and button head grease nipples
• Easy on, easy off
• Manufactured and designed for heavy duty applications
Part Number: 14513 / 6509-D / 14507
ORDER NOW sales@stealthgi.com
• Assist in the lubrication of hard to reach lube points and bearings
• Groups lube points together away from dangerous or contaminated areas
• Inclusive of 45º angled grease nipples and 6mm tube compression fittings
• 6mm OD grease tubing also readily available
Part Number
Description
6134
Four point header block
6135
Five point header block
6136
Six point header block
441
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
GREASE KITS
GREASE KIT - WITH HOSE REEL
MINILUBE® Portable
Manual Greasing System
•
•
•
30 shots each prime
Max. pressure: 68,900 kPa (10,000 psi)
Includes high pressure/high volume gun
and 1.5m x 12mm hose
* Containers available to suit selected K7 version
Item Code: K7-01
180kg Grease Kit with Hose Reel
• Includes a 55:1 ratio grease pump, 10m hose reel,
drum cover follower plate, z swivel, air and grease hose
assemblies and high pressure grease control valve
• Delivery rates of up to 350 grams per minute
• Will handle high density, tacky greases up to NLGI2
• Integral filter protects pump from foreign particle
contamination
• 55:1 ratio air motor develops grease pressures up to
7,950psi
Part Number: 453000
2.5kg Grease Kit
•
•
•
•
•
Grease pressures of up to 10,000psi
Foot operated design leaves hands free to access
difficult to locate lube points
Up to 30 shots before the hand piece needs to be
reloaded with grease
High volume or high pressure option reduces greasing
down time
360˚ swivel eliminates annoying hose tangling
Part Number: 6336
20kg Grease Kit
• Integral filter protects pump from foreign particle
contamination
• 55:1 ratio air motor develops grease pressures up
to 7,950psi
• Will handle high density, tacky greases up to NLGI2
• Covered by a unique two year warranty
• Quiet operation due to exhaust muffler
• Cast alloy dual cylinder air motor guarantees
a long service life
• Ideal for busy workshops where greasing is
undertaken all day, every day
Part Number: 424170
GREASE KIT - WITH TROLLEY
20kg Grease Kit with Trolley
• Ideal for busy workshops where greasing is undertaken
all day, every day
• The heavy duty air motor free of external plastic
components will not distort prematurely and a built in
filter reduces the chance of costly repairs caused by
pump tube contamination
• Integral filter protects pump from foreign particle
contamination
• 55:1 ratio air motor develops grease pressures up
to 7,950psi
• Will handle high density, tacky greases up to NLGI2
• OH&S friendly
Part Number: 424150
GREASE LUBRICATION SYSTEM
20kg Grease Kits
• Kit includes heavy duty pump with 20kg drum cover,
follower plate, carry handle, 3/8” ID delivery hose
assembly, z swivel, control valve and holster
• Maximum working pressure up to 4,000psi
• Dispenses up to 70-80 grams per minute
Part Number
EPL-240
KPL-24SP
Description
240V
24V
Automatic Grease Lubrication System
180kg Grease Kit
•
•
•
•
•
442
55:1 ratio grease pump develops up to 7,950psi
Integral filter eliminates the chance of pump tube contamination
Lightweight ergonomic, cast alloy, grease
control valve included
Ideal for busy workshops where greasing is undertaken a
ll day, every day
180kg drum not included
Part Number: 428262
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
• Complete kit to service 20 grease points automatically
• Includes a Beka Max 24vdc pump station with on board timer and
4kg grease reservoir, 70m of grease filled hose, reusable hose ends,
compression fittings and adaptors, nuts and bolts, cable ties and protective hose wrapping
• System suitable for use with NLGI2 greases
# Please note, assistance will be required to design a system to suit your specific application
Part Number: Beka-Max 20
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
GREASE LUBRICATORS
Grease Nipples - Button Head
Part Number
Thread Type
Refillable Automatic Grease Lubricator
LT46
1/8” BSP
• Can be set to dispense 300cc of grease within a
1 month period or periods of 3, 6 or 12 months
• Powered by four AAA batteries
• Maximum operating pressure of 30 bar (440psi)
• Operating temperature range from -10ºC to +50ºC
LT52
1/4” BSP
Part Number
Description
SPG300-D
No bracket for direct mounting
SPG300-R
Bracket, hose and fittings for remote mounting
Grease Nipple Straight
Part Number
Thread Type
Part Number
Thread Type
L29
1/8” BSP Str.
L2
1/4” BSW Str.
L161
6m x 1 Str.
L1
1/4” BSF Str.
L185
1/4” UNF Str.
L48
1/4” BSP Str.
Uniquip Grease Lubricator
•
•
•
•
•
•
Used for general purpose applications
Steel base
Reservoir capacity of 150 grams
Large grease capacity reduces the amount of time required to undertake plant and equipment lubrication
Eliminates grease waste and over greasing
Increases bearing life by supplying the correct amount of grease as required
Part Number: GP20
Grease Nipple - 45o
Uniquip Grease Lubricators
- Heavy Duty
Part Number
Thread Type
Part Number
Thread Type
LA34
1/8” BSP 45º
LA6
1/4” BSW 45º
LA165
6m x 1 90º
LA5
1/4” BSF 45º
LA187
1/4” UNF 45º
LA52
1/4” BSP 45º
• Large grease capacity reduces the amount of time
required to undertake plant and equipment lubrication
• Eliminates grease waste and over greasing
• Increases bearing life by supplying the correct amount of grease as required
Part Number
Applications
Base
Capacity
RF15
Heavy Duty
Forged alloy
47 grams
RF30
Heavy Duty
Forged alloy
150 grams
GREASE NIPPLE - KITS
GREASE NIPPLES
Grease Nipple
Assortment Kit
• All grease nipples included in the kit are case hardened, fully chromated, zinc passivated, batch tested to 8,000psi and conform to international standards including BSS 1486, DIN 71412, SAE J534 and JIS B1575
• Patented Kinglok® method of construction
Grease Nipple - 90o
Part Number
Thread Type
Part Number
Thread Type
LA44
1/8” BSP 90º
LA11
1/4” BSW 90º
LA169
8m x 1 90º
LA10
LA189
1/4” UNF 90º
LA60
Part Number
Description
L4675
101 Industrial grease nipple assortment kit
1/4” BSF 90º
L4676
100 Metric grease nipple assortment kit
1/4” BSP 90º
L4678
163 Automotive grease nipple assortment kit
443
ORDER NOW sales@stealthgi.com
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
GREASE NIPPLE THREAD TESTER
Grease Nipple
Thread Tester
• A handy tool for quickly and easily identifying the thread type of your grease nipples and other fittings
• Made from aluminium, this low cost compact and lightweight utility tool can be stored in a handy place ready for use
• Comes complete with all the common thread sizes including BSP, NPT, UNF, BSW and metric
• Extra holes in top corners for hanging in common areas for easy access
Part Number: 6000
GREASE PUMP - MULTI LINE
Heavy Duty Multi-line
Grease Pump
• Use in industrial/mining/mineral
processing applications
• 1 up to 8 adjustable grease outlets
• With 10kg metal reservoir
• 125:1 ratio: 0 to 1.686cc per outlet per minute
• Other ratios available- 300:1 ratio: 0 to 0.702cc per outlet per minute
- 600:1 ratio: 0 to 0.351cc per outlet per minute
- 1200:1 ratio: 0 to 0.175cc per outlet per minute
Part Number: 58-4508
GREASE PUMP - AIR OPERATED
Air Operated 50:1 Ratio
Portable Grease System
•
•
•
•
Insert any size pail desired up to and including 25kg
Low air consumption: inexpensive to operate
and environmentally friendly
Allows flexibility to change grease brands at any time
Includes booster gun - which boosts output pressure to 69 000 kPa (10 000 psi) - and 4m hose
* Stand alone P3 POWERLUBE® grease pump for 20kg drums with B2 booster gun and 4m hose - also available (P3-01)
GREASE - TUBING
6mm Plyamide Grease Tubing
Part Number
Description
100120100-100
100m x 6mm grease tube - grease filled
100120101-100
100m x 6mm grease tube - empty
LUBRICANTS
Item Code: P3-OS2
GREASE PUMP - MANUAL OPERATED
Grease Transfer Pump
•
•
•
For bulk refilling grease guns or the
K7 MINILUBE® container
Cost effective refilling – recover pump cost
after 2.5 drums
Models available to suit 12.5kg to 22kg
grease drums
* Drum not included
Item Code: J2-01
Syntex (Synthetic)
Syntex synthetic lubricant is the next generation in lubricants.
Syntex is the perfect lubricant to use in all applications.
• Silicone free
• Extreme temperature range (-40˚C to +350˚C)
• Extreme pressure
• Clear, odourless formula
• Won’t wash off, won’t dry out
• High flash point (250˚C)
• High fire point (300˚C)
• Approved for incidental food contact
Part Number
3032
Description
Syntex Synthetic Lubricant - Aerosol
Size
350g
LUBRICANTS - CHAIN & DRIVE
Chain & Drive
20kg Grease Gun Pump Loader
• Facilitates fast, convenient and containment free
grease gun refill – up to 50cc per stroke
• Reduces your per kilo grease price by buying your grease in
20kg drums
• Can be used in conjunction with Australian, European and
US manufactured grease guns
• High quality follower plate eliminates air pocket problems
444
Part Number: 108000
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
This is a high quality chain oil containing molybdenum disulphide
that swiftly penetrates into pins and bushes to ensure minimum
wear of chains and sprockets. Rocol Chain and Drive Spray dries
to a water resistant film that will not drip or throw off, providing
corrosion protection in wet environments. The aerosol pack allows
easy application even to moving chains.
Part Number
RY442352
Description
Chain & Drive Lubricant Spray
Size
300g
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
LUBRICANTS - DRY FILM
Food Grade Chain Lube
®
Dry Film
Rocol Dry Film Teflon® Spray deposits a dry film of Teflon to metallic and
non-metallic surfaces. The white non-toxic, odourless film provides a
lubricating medium with very low frictional properties and is unaffected by
water, steam and most other chemicals. It can be used as a dry film lubricant
on a wide variety of applications in food environments or clean industries
where contamination must be avoided or dark coloured lubricants are
undesirable.
Part Number
Description
Size
RN500912
122L Dry Film Molybdenum Disulphide Spray
300g
RY502142
Dry Film Teflon Spray 300g
300g
• NSF H1 Registered for incidental food contact
• Formulated specifically for use on food processing
conveyors and equipment
• Unique foaming action clings to chain
• Penetrates, lubricates, and protects moving parts by
reducing friction and wear
• Operates effectively in temperatures up to 162˚C
• Inhibits corrosion, reduces load stress and greatly extends
chain life
Applications: Chain drives, chains, conveyors, ovens,
open gears, overhead cranes and trolleys, pulleys, sprockets.
Part Number
7113
Description
Food Grade Chain Lube - Aerosol
Size
350g
LUBRICANTS - FOOD GRADE
Sapphire Foodlube
Food Grade Machine Oil
This product is a synthetic hydrocarbon based grease thickened with
aluminium complex soap to NLGI #2, containing both solid lubricants and
chemical (EP) additives for improved load carrying, anti wear and water
washout properties. This white non-toxic bearing grease is designed for the
effective lubrication and protection of ball, roller and plain bearings operating in
food and other clean industries.
• NSF H1 Registered for incidental food contact
• Effective general-purpose lubricant for use on food processing equipment
• Penetrates and loosens rust, scale, dirt and corrosion to free parts and fasteners
• Contains no silicone and is virtually odourless and colourless
• Will not harm metal, wood, plastic or painted surfaces
Part Number
Applications: Bakery equipment, bottling equipment,
packaging equipment, fans, fillers, pumps, rollers, scales,
mixers, meat and poultry equipment.
Part Number
7111
Description
Food Grade Machine Oil - Aerosol
Description
Size
RY515330
Sapphire Foodlube Bearing Grease
400g
RY515331
Sapphire Foodlube Bearing Grease
2kg
Size
350g
Food Grade Silicone
• NSF H1 Registered for incidental food contact
• Multi-purpose silicone spray for food processing and
handling application
• Harmless to most rubbers and plastics
• Wide effective temperature range (-40˚C to 204˚C)
• Excellent release agent and lubricant for all surfaces
• Convenient 360˚ spray valve – can be sprayed from any
position
• Meets FDA Regulation CFR 21-178.3570 for incidental food
contact
Food Grade Lube
Applications: Bottling machinery, chutes, conveyors, freezers, guides, knives,
ovens, pulleys, rails, slicers, grinders, mixers, proofers, poultry evicerators,
hock cutters.
Part Number
7112
Description
Food Grade Silicone - Aerosol
This is a general purpose oil for lubricating and penetrating applications where
a low odour, colourless food grade lubricant is required.
Part Number
Description
Size
RY442330
Food Grade White Chain & Drive Spray
Size
RY443934
Food Grade Penetrating Chain Lubricant
20 Litre
350g
RY443935
Food Grade Penetrating Chain Lubricant
205 Litre
250g
445
ORDER NOW sales@stealthgi.com
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
LUBRICANTS - LANOLIN
LUBRICANTS - OIL
3-IN-ONE Oil – 88ml
General Purpose
Liquid Lanolin
A general lubricant and corrosion protection for light industrial, electrical
and household applications. Non-conductive to 70kV. Protects electrical
connectors, ECUs and switch gear, high and low voltage.
Part Number
GP\PP-0400
Description
General Purpose Liquid Lanolin
•Lubricates
•Cleans
•Prevents rust
•Great uses for around the home, in the office,
work, garden, sports, car
Product Code: 10035
Size
400g Aerosol
GP\SP 0750
General Purpose Liquid Lanolin
750ml Spray
GP\0001
General Purpose Liquid Lanolin
1 Litre Bottle
GP\0005
General Purpose Liquid Lanolin
5 Litre Bottle
GP\0020
General Purpose Liquid Lanolin
20 Litre Drum
Silicone 300g
•High performance lubrication and protection
•Safe on metal, rubber, wood and vinyl
•Quick drying
•No messy residue
•Made in Australia
Product Code: 11061
Heavy Duty Liquid Lanolin
A lubricant and corrosion inhibitor best suited to marine, heavy industrial
and commercial applications. Non-conductive to 70kV. Ideal for harsh and
highly corrosive environments.
Part Number
Description
Size
High Performance Lubricant with
PTFE 300g
HD\PP-0400
Heavy Duty Liquid Lanolin
400g Aerosol
HD\SP-0750
Heavy Duty Liquid Lanolin
750ml Spray
HD\SP-0001
Heavy Duty Liquid Lanolin
1 Litre Spray
•Long-lasting lubrication and corrosion protection
•Excellent for heavy load and high temperature applications
•Dramatically reduces friction and wear
•Withstands extreme temperatures, -45º to 230º C
HD\0001
Heavy Duty Liquid Lanolin
1 Litre Bottle
Product Code: 11082
HD\0005
Heavy Duty Liquid Lanolin
5 Litre Bottle
HD\0020
Heavy Duty Liquid Lanolin
20 Litre Drum
LUBRICANTS - OPEN GEAR
LUBRICANTS - MULTI PURPOSE
®
808 Multi Purpose Silicone
Opal Tufgear
• Concentrated formula provides thin, durable film that revives,
lubricates and protects
• Will not mark or stain
• Ideal for use on most surfaces
• Reduces friction and galling
A heavy duty clay based flexible open gear grease containing
molybdenum disulphide, offering exceptional load carrying and
wear resistance. This grease is ideal for dockyard, mobile or
overhead cranes and can be applied by spatula or jumbo sized
cartridge. It has excellent resistance to many chemicals which makes it
effective for lubricating open gears found in tanneries or similar industries.
Applications: Lubricates locks, hinges, linkages, window guides,
rails, rolling and sliding mechanisms, mould release.
Part Number
Description
Size
Part Number
Description
Size
RY460610
Opal Tufgear Open Gear Grease 900g Jumbo Cart
900g
3055
808 Multi Purpose Silicone Lube - Aerosol
330g
RY462402
Open Gear Lubricant Spray 300g
300g
446
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
LUBRICANTS – PENETRANTS
4L Bulk - Liquid
Applicator - 500ml
Product Code: 61000
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 45040
60g Aerosol Can
(2x6 Preassembled Clip Strips)
•Drives out moisture
•Protects •Lubricates
•Cleans
•Penetrates
Product Code: 61006
20L Bulk - Liquid
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 45020
150g Aerosol Can Multi-Use Product
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 61001
200L Bulk - Liquid
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 45200
300g Aerosol Can Multi-Use Product
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 61003
350g Aerosol Can with Smart Straw
Multi-Use Product
5.56 Multi-Purpose
Penetrates and lubricates,
loosens rusted parts, prevents corrosion and displaces moisture.
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
THE PROFESSIONAL’S CHOICE
• Extremely versatile
• Contains no silicones
• Total maintenance for automotive, industrial, household and all sporting equipment
Product Code: 61009
CRC 5.56 multi-purpose product has superior penetrating power that breaks
through rust and corrosion while it cleans away scale and dirt. Eliminates the
need for many disassembly operations. Lubricates for smooth action, and
silences annoying squeaks and squeals. Protects metals against corrosion
and displaces moisture to help start wet engines.
425g Aerosol Can Multi-Use Product
•Drives out moisture
•Cleans
•Protects
•Penetrates
•Lubricates
Product Code: 61004
ORDER NOW sales@stealthgi.com
Part Number
Description
Size
5003
5.56 - Pump Pack
5004
5.56 - Bulk Pack
5005
5.56 - Aerosol
5006
5.56 - Bulk with trigger
1L
5009
5.56 - Bulk
20L
500mL
4L
400g
447
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
LUBRICANTS - WIRE ROPE
Penetr8
CRC Penetr8 is a high-speed penetrant that rapidly frees
rusted and corroded fasteners, pins and bound mechanisms.
It helps to dissolve rust and corrosion while quickly
penetrating. Penetr8 eases disassembly of mechanical
equipment, fittings and fixtures through its high speed
penetration.
CRC Penetr8 is a clear formula that contains no dyes, and
leaves no mess. CRC Penetr8 has a convenient 360 degree
spray valve, allowing it to be sprayed from any position. The
independent Capillary Penetration of Liquids test, that was
carried out on Penetr8, showed that it penetrates further than
any of its competitors.
Part Number
5501
Wire Rope
Description
Size
Penetr8 Hi Speed Penetrant - Aerosol
400g
LUBRICANTS - RTD
Rocol Wire Rope Grease is a semi-fluid grease with a combination of
lubricating solids and molybdenum disulphide and is designed for the
lubrication and corrosion prevention of wire ropes working under all conditions,
including marine environments. It penetrates between the strands to the core
of the rope providing complete rope lubrication.
Part Number
Description
RY453291
Wire Rope Grease RD105
RY453321
Fluid Wire Rope Grease RD205
RY452412
Wire Rope Lubricant Spray
Size
20kg
20 Litre
300g
METER - ELECTRONIC INLINE
AdBlue Meter
Reaming, Tapping &
Drilling Lubricant
A medium viscosity, high performance metal cutting lubricant for all machining
operations including reaming, tapping and drilling on all metals. Rocol RTD
can be used to gain improved performance on all metal cutting operations
where lubricant is applied direct to the work piece or as a flood coolant.
Part Number
Description
• Easy to install inline or at the end of a delivery hose
• Can be fitted directly to an automatic or manual nozzle
• Flow rates of up to 100LPM
• Operating pressures of up to 290psi
• Accurate to ±1.0%
• 1” inlet and outlet connections
• In the field calibration is possible
Part Number: 407011
Size
RY550171
RTD Reaming, Tapping and Drilling Lubricant 500ml
500ml
RY550181
RTD Reaming, Tapping and Drilling Lubricant 5 litre
5 Litre
RY560151
RTD Reaming, Tapping and Drilling Lubricant 20 litre
20 Litre
RY551211
RTD Reaming, Tapping and Drilling Lubricant Paste 500g
500g
RY551221
RTD Reaming, Tapping and Drilling Lubricant Paste 2.5kg
2.5kg
RY552132
RTD Reaming, Tapping and Drilling Lubricant Spray 300g
300g
LUBRICANTS - SYNTHETIC GRINDING FLUID
Inline Electronic Fuel Meter
• Turbine type meter with a reinforced polyamide
body and polypropylene turbine
• Accurate between flow rates of 10LPM to 120LPM
• Accurate to ± 1.0%
• Field calibration of the meter is possible
• 1” BSP (f) inlet and outlet ports
• Flow rate analysis function included as standard
• Maximum working pressure of 300psi
• Suitable for use with diesel fuel, petrol, kerosene and water
Part Number: 407010N
GPI Inline Electronic
Fuel Meter
Ultragrind 430
A nitrate free, synthetic, water mix grinding fluid
containing an excellent corrosion inhibition package and wetting agents.
It is designed for light to medium surface and cylindrical grinding operations,
and for use with all types of grinding wheels.
Part Number
RY571471
Description
Ultragrind 430 Synthetic Grinding Fluid
448
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Size
20 Litre
• Suitable for petrol, diesel fuel and kerosene
• Designed for outdoor, year round use on gravity
feed or fuel transfer pumps in the 10LPM to 100LPM flow range
• Ideally suited for use between pump hose and fuel nozzle
• Maximum batch total of 9,999 litres
• Maximum cumulative total of 9,999 litres
• Turbine type meter accurate to ±2.5%
• 1” BSP (f) inlet/outlet
• Maximum working pressure of 300psi
Part Number: 01A12LM
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
OIL - CANS
In Line Grease Meter
• Maximum operating pressure of 7,100psi
• Accurate to +- 2%
• Battery life of up to 10,000 hours
• Can be used in conjunction with manual or
air powered greasing equipment
• Ideal for applications where over or under lubrication can result in costly bearing failures and machine downtime
Part Number: 411100
METER - MECHANICAL
Workshop Oilers
• Suitable for normal and inverted use
• Twin brass double ball valve pump enables drip feed
• Sturdy impact-proof and robust zinc diecast bowl
Part No.
Mechanical Fuel Meter
• Suitable for the metering of petrol, diesel fuel
and kerosene
• Accurate between flow rates of 20LPM to 120LPM
• Mechanical gear meter accurate to ±1.0%
• Maximum working pressure of 145psi
• Field calibration possible
• 1” BSP (f) inlet and outlet ports
• Maximum batch total 999 litres
• 6-digit cumulative total display
• Suitable for gravity feed or pump applications
Part Number: 51008
GPI Mechanical High Volume
Fuel Meter
•
•
•
•
•
•
Flow rates of up to 114LPM
1 1/2” BSP (f) inlet and outlet ports
Suitable for use with diesel fuel. petrol and kerosene
Field calibration possible to measure a variety of fluids or to adjust for differences in viscosity and flow rates
Large easy to read display
Built in filter helps protect against foreign particle contamination
05111
Description
Capacity
Rigid Spout
125ml
05133950
Rigid & Flex Spout
250ml
05135950
Rigid & Flex Spout
500ml
05223
Rigid & Flex Spout Brass Pump
250ml
05225
Rigid & Flex Spout Brass Pump
500ml
05226
Rigid & Flex Spout Brass Pump
750ml
03903
Workshop Oiler Rigid Spout
300ml
03905
Workshop Oiler Rigid Spout
500ml
03903867
Workshop Oiler Spray Nozzle
300ml
03903868
Workshop Oiler Applicator Brush Nozzle
300ml
03903869
Workshop Oiler Flex Spout
300ml
OIL - COMPRESSOR
Part Number: FM530
Compressor Oils
GPI Mechanical Fuel Meter with Filter
• Accurate between flow rates of 15 and 75LPM
• Field calibration possible
• Heavy duty cast aluminium housing
• 1”BSP inlet and outlets
• Complete with built-in filter
Part Number: FM100
Mechanical Fuel Meter
•
•
•
•
•
Oval gear mechanism for optimum accuracy
Suitable for diesel, k
erosene and petrol
Flow rate: 3 - 80L/min
Accuracy ± 1%
Inlet/outlet thread: 1” BSPP (RP)
* Also available with filter (DM150-01) and biodiesel version (DM100-01-BD)
Item Code: DM100-01
ORDER NOW sales@stealthgi.com
Mineral oil based compressor fluids are premium up
market lubricants recommended for rotary vane and
screw air compressors. Inhibited to protect against
rust, oxidation, foam development and are zinc free.
Part Number
Description
Size
HI6-2758-0020
Compressor Oil 32
20L
HI6-2758-0200
Compressor Oil 32
200L
HI6-2761-0020
Compressor Oil 46
20L
HI6-2761-0200
Compressor Oil 46
200L
HI6-2763-0005
Compressor Oil 68
5L
HI6-2763-0020
Compressor Oil 68
20L
HI6-2763-0200
Compressor Oil 68
200L
HI6-2765-0020
Compressor Oil 100
20L
HI6-2765-0200
Compressor Oil 100
200L
HI6-2767-0020
Compressor Oil 150
20L
HI6-2767-0200
Compressor Oil 150
200L
449
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
OIL - CONTROL GUNS
HG40
HG45
HG55
HG60
HG100/Z/60/75
Oil Control Guns
Macnaught’s high quality range of oil control
guns are suitable for gear oils, automatic
transmission fluid, antifreeze/antiboil, diesel
oil and engine oil, with flow rates up to
30 L/min (higher for the HG100) and max.
operating pressure of 10,350 kPa (1,500 psi,
103.5 bar).
All Macnaught metered guns use the highaccuracy oval gear measurement system.
HG40 -Mechanical Oil Control Gun featuring mechanical display and single reset button
HG45-Mechanical Pre-set Auto Shut-off Oil Control Gun with easy-to-use thumbwheels for accurate volume setting, and reset button
HG55 - Electronic Oil Control Gun with sleep mode, EEPROM memory retention, accumulative totaliser and resettable batch totaliser
HG60 - Electronic Pre-set Auto Shut-off Oil Control Gun with sleep mode, EEPROM memory retention, accumulative totaliser and resettable batch totaliser, 5 variable preset totals available for use
HG100/Z/60/75 - High Flow Oil Control Gun with flexible 350mm (14”) x 19mm (3⁄4”) hose, capable of up to
57 L/min. Also available HG100-Z Zinc version; HG100-75 version featuring Electronic Flow Meter (IM75) and HG100-60 version featuring Mechanical Flow Meter (IM60)
OIL - CONTROL VALVE
Hydraulic Oils
Oil Control Valve
High Quality mineral oil based hydraulic fluids
meeting the needs of modern hydraulic equipment,
operating in medium to severe service conditions,
where machine performance is not unduly affected
by fluid temperature variations.
• Heavy duty oil control valve supplied inclusive of an inlet swivel is ergonomically designed to minimise operator fatigue
• A flexible outlet hose makes for quicker and easier lubricant
delivery
• 1/2” BSP (f) swivel supplied standard
• Genuinely heavy duty cast alloy body
• Non drip automatic open, manual close nozzle minimises oil drips
Part Number
Description
Size
HI5-2595-0020
Hydraulic 10 - Antiwear Hydraulic Oil
20L
HI5-2595-0200
Hydraulic 10
200L
HI5-2796-0020
Hydraulic 15 - Antiwear Hydraulic Oil
20L
HI5-2796-0200
Hydraulic 15
200L
HI5-2710-0020
Hydraulic 22 - Antiwear Hydraulic Oil
20L
HI5-2710-0200
Hydraulic 22
200L
HI5-2712-0005
Hydraulic 32 - Antiwear Hydraulic Oil
5L
HI5-2712-0020
Hydraulic 32
20L
HVI Hydraulic Oils
HI5-2712-0200
Hydraulic 32
200L
Hydraulic fluids with improved performance
due to the use of a highly shear stable viscosity
index improver giving the fluids multigrade
characteristics. This enables the fluid to operate
over a wider temperature range with minimum
variation in viscosity.
HI5-2714-0005
Hydraulic 46 - Antiwear Hydraulic Oil
5L
HI5-2714-0020
Hydraulic 46
20L
HI5-2714-0200
Hydraulic 46
200L
HI5-2716-0005
Hydraulic 68 - Antiwear Hydraulic Oil
5L
HI5-2716-0010
Hydraulic 68
10L
HI5-2716-0020
Hydraulic 68
20L
Part Number: 363078
OIL - HYDRAULIC
Part Number
Description
Size
HI5-2740-0020
Hydraulic HVI 32 (Blue High viscosity Index)
20L
HI5-2740-0200
Hydraulic HVI 32
200L
HI5-2742-0020
Hydraulic HVI 46 (Blue High viscosity Index)
20L
HI5-2716-0200
Hydraulic 68
200L
HI5-2742-0200
Hydraulic HVI 46
200L
HI5-2718-0020
Hydraulic Oil 100 - Antiwear Hydraulic Oil
20L
HI5-2744-0020
Hydraulic HVI 68 (Blue High viscosity Index)
20L
HI5-2744-0200
Hydraulic HVI 68
200L
HI5-2718-0200
Hydraulic Oil 100
200L
HI5-2746-0020
Hydraulic HVI 100 (Blue High viscosity Index)
20L
HI5-2720-0020
Hydraulic Oil 150 - Antiwear Hydraulic Oil
20L
HI5-2746-0200
Hydraulic HVI 100
200L
HI5-2720-0200
Hydraulic Oil 150
200L
450
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
Zinc Free Hydraulic Oil
Zinc free, ashless, anti-wear fluids blended
from high quality mineral oils possessing a
high viscosity index and low pour point. They
provide long trouble free service life and will
be chemically stable under severe operating
conditions. They give excellent protection
against corrosion, resisting emulsification and
formation of unwanted stable foam.
Part Number
HI5-2757-0020
Synmach Oils
Superior full synthetic, industrial extreme
pressure gear and bearing oils, with enhanced
anti-oxidation, anti-corrosion, anti-rust and
anti-foam tendencies.
Description
Size
Zinc Free Hydraulic Oil 22
20L
Part Number
Description
Size
HI6-2613-0020
Synmach Oil 220
20L
HI6-2613-0200
Synmach Oil 220
200L
HI6-2615-0020
Synmach Oil 320
20L
HI5-2757-0200
Zinc Free Hydraulic Oil 22
200L
HI5-2758-0020
Zinc Free Hydraulic Oil 32
20L
HI6-2615-0200
Synmach Oil 320
200L
HI5-2758-0200
Zinc Free Hydraulic Oil 32
200L
HI6-2617-0020
Synmach Oil 460
20L
HI5-2761-0020
Zinc Free Hydraulic Oil 46
20L
HI6-2617-0200
Synmach Oil 460
200L
HI5-2761-0200
Zinc Free Hydraulic Oil 46
200L
HI5-2763-0020
Zinc Free Hydraulic Oil 68
20L
HI5-2763-0200
Zinc Free Hydraulic Oil 68
200L
HI5-2765-0020
Zinc Free Hydraulic Oil 100
20L
HI5-2765-0200
Zinc Free Hydraulic Oil 100
200L
OIL - SLIDEWAY
OIL - MACHINE
Slideway Oils
Mineral oil based lubricants recommended for
slideways of machine tools, planers, lathes or
guides where a tacky lubricant is required.
Part Number
Machine Oils
Premium industrial extreme pressure gear and
bearing oils, especially useful where high loads
and/or high temperatures are encountered.
Part Number
Description
Size
Description
Size
HI6-2607-0020
Slideway Oil 68
20L
HI6-2607-0200
Slideway Oil 68
200L
HI6-2606A-0020
Slideway Oil 100
20L
HI6-2606A-0200
Slideway Oil 100
200L
HI6-2605-0020
Slideway Oil 220
20L
HI6-2605-0200
Slideway Oil 220
200L
HI6-2608-0020
Machine Oil 68
20L
HI6-2608-0200
Machine Oil 68
200L
HI6-2610-0020
Machine Oil 100
20L
HI6-2610-0200
Machine Oil 100
200L
HI6-2612-0020
Machine Oil 150
20L
HI6-2612-0200
Machine Oil 150
200L
HI6-2614-0020
Machine Oil 220
20L
HI6-2614-0200
Machine Oil 220
200L
Oil Measures
HI6-2616-0020
Machine Oil 320
20L
HI6-2616-0200
Machine Oil 320
200L
HI6-2618-0020
Machine Oil 460
20L
• Polyethylene screw cap oil measure will
not dent, scratch or corrode
• Flexible delivery spout makes the topping up of engines, gear boxes, diffs, transmissions and crank cases a quick and easy proposition
HI6-2618-0200
Machine Oil 460
200L
HI6-2620-0020
Machine Oil 680
20L
HI6-2620-0200
Machine Oil 680
200L
OIL - MEASURES
Part Number
Description
5000MFN
5 litre oil measure with flexible spout
2000MFN
2 litre oil measure with flexible spout
1000MFN
1 litre oil measure with flexible spout
451
ORDER NOW sales@stealthgi.com
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
OIL - METER - ELECTRONIC
Electronic Oil Meter
• Maximum flow rate of 20LPM
• 1/2” BSP (f) swivel
• Runs with standard AAA batteries
• Maximum operating pressure of 1,000psi
• Accurate to ± 0.5%
• Swivelling outlet hose assists during the oil delivery process
Part Number: 365603
IBC Pod Oil Dispensing System
OIL - METER - ELECTRONIC PRESET
•
•
•
Oil dispensing system designed to attach to the frame of a bulk
container (pod)
Complete with mounting plate, RETRACTA® oil reel, R-SERIES™ 3:1 ratio oil stub pump, suction hose and feeder hose
Also includes oil lubricator, air pressure regulator, air pressure gauge and quick-connect air fittings
* (Oil control gun sold separately)
Electronic Preset Oil Meter
• Maximum flow of 20LPM
• Minimum flow of 1 LPM
• 1/2” BSP (f) swivel supplied standard
• Weight: 1.5Kg
• Maximum operating capacity: 1,015psi
• Accurate to ±0.3%
• Up to five preselected batch quantities are programmable into the
meter’s memory
Item Code: OS600-00
OIL - THREADING
Part Number: K500N
OIL - SUCTION GUN
Oil Suction Guns
• Ideal for the draining and filling of diffs, gear boxes and engine blocks
• A double ’V’ packing ensures that oil does not leak through the rear
of the gun
Part Number
Description
21040
775cc capacity oil suction gun
21041
530cc capacity oil suction gun
Nu-Clear Threading Oil
Clear mineral oil with low odour and anti-mist formulation.
Part No.
Description
11461
5 Litre Nu-Clear Oil
11481
20 Litre Nu-Clear Oil
OIL - SYSTEMS
OIL - WASTE DRAINER
Brand Logo
Logo
Brand
Portable Trolley Based
Oil System
452
65 Litre Self-Evacuating
Portable Oil Drainer
• 23L/min output (at the pump)
• 205L capacity
• Complete with all fittings and hose
• Includes 3:1 ratio oil pump (R300S), RETRACTA® low pressure oil reel (OLP2121) * (Oil control gun sold separately)
• Capacity: 65 litre (17 gallon)
• Working pressure: 70 - 120 psi
• Ball bearing castor wheels
• Overall dimensions: raised 600(L) x 390(W) x 1650(H)mm
• Telescopic height adjustment
• Nett weight: 23.4kg
Item Code: OS100-00
Part Number: 1046
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
OIL - MANUAL WASTE EXTRACTOR
Mobile Waste Oil Drainer
• Premium quality and European engineering
• Drain bowl capacity of 20 litres
• Holding tank capacity of 100 litres
• Unique specially moulded tray can be used to
hold bolts, filters and washers
• Unique and adjustable off centre catchment
bowl assists in v ehicle waste fluid collection
• Maximum working height of 2000mm, minimum
working height of 1500mm
• Collected vehicle waste fluids can be pressurised
or pumped out of the 100 litre capacity holding tank
Manual Waste Oil Extractor
• Portable and lightweight with a 6.5 litres reservoir capacity
• Ideal for extracting waste oil from motor vehicles, motor bikes,
marine engines, lawn mowers and stationary engines
• Automatic shut off will stop operating when waste oil or water
is extracted
• Can also be used for salt water (bilge) and water
• Complete with probe kit to suit various dipsticks
• A convenient and economical waste oil extraction solution
Part Number: 41006
Part Number: 372400
Mobile Waste Oil Drainer
• Transfers and captures waste oil from crankcases,
transmissions and d
ifferentials
• Drain bowl capacity of 20 litres
• Holding tank capacity of 80 litres
• Height adjustable waste oil reservoir
• Holding tank emptied with the aid of air pressure
• Equipped with a pneumatic safety relief valve calibrated
at 14psi
• Includes a tool filter and spare parts tray
Part Number: 30080
PUMP - AIR OPERATED
OILMASTER® 1:1 Ratio Drum
Pump with Oil Control Gun
•
•
•
•
Low air consumption: inexpensive to operate and environmentally friendly
Delivers up to 27L/min (at the pump) with a quiet, non-corroding air motor
Suitable for up to SAE 140 oils and coolants
Also supplied: 3m hose, suction tube, oil control gun and fittings.
* 1:1 Pump also available separately (T112-01)
Item Code: T112THGR-01
OIL - WASTE DRAINER/EXTRACTOR
Mobile Waste Oil Drainer and Extractor
• Drains and/or extracts waste oil from cars and light
commercial vehicles
• Drain bowl capacity of 20 litres
• Holding tank capacity of 100 litres
• Clear viewing inspection bowl capacity of 8 litres
• Maximum working height of 2000mm
• Minimum working height of 1600mm
• Suction hose includes a rubber grip and a non drip cap
R-SERIES™ 3:1 Ratio Air Drum
Pump with Metered Oil Control
Gun and RETRACTA® Oil Reel
• Designed to transfer oils up to 30m through a single dispensing point in small to medium sized workshops
• Suitable for up to SAE 140 oils and coolants
• Also supplied: 3m feeder hose, suction tube, RETRACTA® Medium Pressure Oil reel (OMP2101) and oil gun.
* 3:1 Ratio Pump also available separately (R300T-01)
Item Code: R300TRG-01
Part Number: 372000
PUMP - DIAPHRAGM AIR OPERATED
Mobile Waste Oil Drainer and Extractor
1
/2” Air Operated Diaphragm Pump
• Extracts and captures waste oil from crankcases,
transmissions and differentials
• Collection bowl capacity of 20 litres
• Holding tank capacity of 80 litres
• Clear viewing inspection bowl capacity of 12 litres
• Suction speed of 6.5 litres per minute
• Suction hose specification of 1/2” x 2000mm
• Draining hose length of 1” x 2000mm
• Draining pressure of 14psi
• 1/4” air inlet connection
• Maximum flow rate of 45 LPM
• Maximum delivery per cycle of 70cc
• Polypropylene body and hytrel diaphragms
• Weight of just 3.5kgs
• 1⁄2” NPT (f) fluid inlet, 1⁄4” NPT (f) air inlet, 1⁄2” NPT (f) fluid outlet
• Dimensions of 297mm (W) x 220mm (H) x 180mm (D)
• Mounting hole layout of 115mm x 122mm
• Suitable for the transfer of waste oils, waste water, fuel, oil, pesticides and herbicides
Part Number: 30101
Part Number: NDP-15FPH
ORDER NOW sales@stealthgi.com
453
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
3
/4” Air Operated Diaphragm Pump
• Maximum flow rates of 100LPM
• 3/4” BSP (f) inlet and outlet ports
• Aluminium body and hytrel diaphragms
• Suitable for the transfer of diesel fuel, gear oil,
engine oil, waste oil, antifreeze and waste water
• Maximum delivery per cycle of 350cc
• Light weight at 9kgs
• Mounting hole layout of 140mm x 195mm
• Dimensions of 249mm (W) x 319mm (H) x 180mm (D)
Part Number: NDP-20BAH
Stainless Steel Air Operated
Diaphragm Pump
• Maximum flow rates of 160LPM
• 1”BSP (f) inlet and outlet ports
• Stainless steel body and teflon diaphragms
• Maximum delivery per cycle of 600cc
• Weight of just 13kg
• Mounting hole layout of 170mm x 222mm
• Suitable for the transfer of MEK (methylethyl ketone), phosphoric acid, methanol, paint thinners and water
Part Number: NDP-25BST
PUMP - DIESEL FUEL DRUM
1” Air Operated Diaphragm Pump
• Maximum flow rates of 160LPM
• 1”BSP (f) inlet and outlet ports
• Aluminium body and hytrel diaphragms
• Suitable for the transfer of diesel fuel, gear oil,
engine oil, waste oil, brake fluid, antifreeze and
waste water
• Maximum delivery per cycle of 600cc
• Weight of just 13kg
• Mounting hole layout of 170mm x 222mm
• Dimensions of 287mm (W) x 382mm (H) x 210mm (D)
• Poly and stainless steel models also available
Diesel Fuel Drum Pump
• Self priming drum pump with built in bypass
• Rotary vane type pump inclusive of fuel nozzle, holster,
4.0 metre antistatic delivery hose and 2.0 metre battery cable
• Duty cycle of 30 minutes on, 30 minutes off
• 3/4” BSP (f) inlet and outlet threads
Part Number
Part Number: NDP-25BAH
11/2” Air Operated Diaphragm Pump
• Aluminium body and hytrel seals
• 1½” BSP (f) fluid inlet and outlet ports
• Maximum flow rates of 350LPM
• Maximum delivery per cycle of 2800cc
• Mounting hole layout of 200mm x 268mm
• Dimensions of 411mm (W) x 707mm (H) x 250mm (D)
• Suitable for the transfer of diesel fuel, gear oil, engine oil, waste oil, brake fluid, antifreeze and waste water
• 2” and 3” models also available
Voltage
Curr. Draw
Flow Rates
Nozzle
52002A
12V
18 amps
46LPM
Auto
52002
12V
18 amps
50LPM
Manual
GPI Diesel Fuel Drum Pump
•
•
•
•
Gear type pump with a heavy duty cast
aluminium body
Duty cycle of 30 minutes on, 30 minutes off
Includes 4.6 metres of battery cable, 3.0 metres
of antistatic delivery hose and heavy duty nozzle
1” NPT (f) inlet thread, 3/4” NDT (f) outlet thread
Part Number
Voltage
Curr. Draw
Flow Rates
M150SA
12V
19 amps
49LPM
Auto
M150S
12V
18 amps
56LPM
Manual
Part Number: NDP-40BAH
Nozzle
PUMP - DIAPHRAGM - STAINLESS STEEL
Stainless Steel Air Operated
Diaphragm Pump
•
•
•
•
•
454
Maximum flow rates of up to 100LPM
3/4”BSP (f) inlet and outlet ports
Stainless steel body and teflon diaphragms
Suitable for use with solids up to 2mm OD
Suitable for the transfer of MEK (methylethyl ketone), phosphoric acid, methanol, paint thinners and water
Part Number: NDP-20BST
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
High Volume Diesel Fuel Drum Pump
•
•
•
•
Self priming vane pump with sintered steel rotor and acetal
resin vanes
Pump bypass incorporated into the pump body
Duty cycle of 30 minutes on, 30 minutes off
1” BSP (f) inlet and outlet threads
Part Number
Voltage
Curr. Draw
Flow Rates
Nozzle
52004A
12V
16 amps
68LPM
Auto
52004
12V
16 amps
75LPM
Manual
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
PUMP - DIESEL FUEL TRANSFER KIT
GPI High Volume Diesel
Fuel Drum Pump
Self Bundled and Portable Diesel
Fuel Transfer Kit
• High performance USA made pump
• Includes 6.5 metres of antistatic delivery hose
• Vane type pump with heavy duty cast iron pump head assembly
• Duty cycle of 30 minutes on, 30 minutes off
• 8m battery cable, quality battery clamps and lockable nozzle
• Includes a self-priming pump (delivers up to 45LPM), battery
cables and switch, suction hose and delivery hose with nozzle
• Protects fuel transfer parts from dust and dirt contamination
• Collects and contains excess fuel spillage and/or drips
Part Number
Voltage
Curr. Draw
Flow Rates
Nozzle
M3025-AL
12V
35 amps
85LPM
Auto
Part Number
Voltage
Manual
231010
12V
232010
24V
M3025-ML
12V
35 amps
95LPM
PUMP - DIESEL FUEL TRANSFER
PUMP - DIESEL REFUELLING
Diesel Fuel Transfer Pump
• Vane type pump with sintered steel rotor and
acetylic resin vanes is capable of flow rates of up
to 72LPM
• 240 volt continuous running operation
• Built in 100 micron filter is easily accessible when cleaning is required
• 1” BSP inlet and outlet
• Cast iron, paint finished pump housing is weather resistant
• Ideal for diesel fuel transfer out of bulk tanks where 240 power is available
Part Number: 732000
Diesel Refuelling Tank Pump
• Inlet and outlet of 1” OD hose tails
• Cast iron pump body inclusive of an anti-corrosion treatment
• Vane type pump with sintered steel rotor and acetalic resin vanes
• Continuous duty electric motor protected against amperage and temperature
PUMP - DIESEL DRUM - ELECTRIC
Part Number
Voltage
Curr. Draw
Flow Rates
337000
12V
10amps
40LPM
338010
24V
20amps
60LPM
PUMP - DRUM - LEVER ACTION
12V Electric Diesel Pump –
Auto Shut-off Nozzle
•
•
•
Suits 60/205L drums or tanks
Pumps up to 50L/min (free flow)
Includes pump, suction tube, bung adaptor, power cable and clips, and nozzle
* 5 year warranty
* Also available with manual nozzle, and in 24V
* Drum not included
Item Code: GE12A-01
Lever Action Poly Drum Pump
• Suitable for the transfer of pesticides, herbicides, mild acids and
detergents
• Delivers 330ml on the down stroke
• Polyethylene body, piston and valves with nitrile seals
• Robust – tested to over 2 million strokes
• Telescopic pick up tube makes the pump suitable for 60 or
205 litre drums
Part Number: 950
12V High Flow Electric Diesel Pump – Auto Shut-off
• Suits 60/205L drums or tanks
• Pumps up to 75L/min (free flow)
• Includes pump, hoses, bung a
daptor, power cable and clips and nozzle
Lever Action Drum Pump
* 5 year warranty
* Also available in 24V/Manual nozzle
* Drum not included
•
•
•
•
Item Code: GEHF12A-01
Part Number: 2002G
ORDER NOW sales@stealthgi.com
Goose neck nozzle design
Suitable for filling and measuring oil bottles
Telescopic down tube enables the pump to suit 60L/205L drums
Delivers approximately 0.040 litres per stroke
455
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
PUMPS - DRUM - LEVER ACTION
PUMP - DRUM - ROTARY ACTION
AdBlue Hand Pump
20 Litre Drum Pumps
• Now capable of delivering up to 110ml per stroke
• Drainback nozzle holster to ensure that excess oil ends up
back in the drum and not on your workshop floor
• Delivers lubricant and transmission fluid on the down stroke
Part Number
• Rotary action pump suitable for the transfer
of urea/AdBlue at flow rates of up to 15LPM
• Supplied with 3 metres of delivery hose and
drum adaptors
• Weight of 2.3kg
Part Number: 332080
Description
8828N
For use in transferring gear oil
8826N
For use in transferring ATF
Polypropylene Rotary Drum Pump
LITRESTROKE™ Manual Fuel Pump
• Fits 60/205L drums
• Pumps up to 40L/min
• Suitable for diesel, petrol and up to SAE 30 oils
• Flow rates of up to 20LPM
• Polypropylene, teflon and stainless steel construction offer
excellent chemical resistance
• Unique, rotating 2 piece discharge spout assists fluid transfer
• Suitable for the transfer of herbicides, pesticides, chemicals and mild detergents
• Suitable for 60 or 205 litre drums
Part Number: 301A
Item Code: HP-01
Multi Purpose Pump
with 1.8m Hose
• Suitable for diesel, up to SAE 90 oil and other non-corrosive fluids
• Approx. 250mL per stroke
• Comes with telescopic suction tube (suits 60L to 205L drums), hose and nozzle
Item Code: A2-51
Ryton Rotary Drum Pump
• Flow rates of up to 20 LPM
• Ryton and stainless steel construction provides excellent
chemical compatibility
• Rotary action facilitates quick and effortless fluid transfer
• Unique, rotating 2 piece discharge spout assists fluid transfer
• Suitable for 60 or 205 litre drums
• Suitable for the transfer of low viscosity chemicals, lacquers
and mild acids
Part Number: 401A
Stainless Steel Drum Pump
456
• Delivers 500ml on the up stroke
• 316 stainless steel body, outlet spout and pick up tube and
piston with a
djustable PTFE seals
• Also features an adjustable outlet spout
• Suitable for the transfer of ammonia, ethyl acetate, methyl
acetate and nitric acid up to a 50% concentration
Part Number: 733
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
RAPIDFLO™ High Flow
Rotary Action Fuel Pump
•
•
•
Fits 60/205L drums
Pumps over 100L/min
Suitable for diesel, petrol, AV gas and up to
SAE 30 oils
*Also available: Biodiesel version GP-01-BD
Item Code: GP-01
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
Rotary Vane Pump for
60/205L drums
Bi-Lobe Refuelling Drum Pump
with Filter
• Fitted with 1.8m hose and nozzle
• Pumps up to 20L/min
• Suitable for diesel and oils up to SAE 90 viscosity
•
•
•
•
Ideal for the fast and efficient transfer of diesel
fuel, petrol or kerosene
Flow rates up to 100LPM
Includes 2.4 metres of fuel resistant hose, 10 micron
fuel filter and metal nozzle
Bi-lobe type pump requires minimal maintenance
Item Code: RVP-01
Part Number: 5080A
PUMPS - DRUM - 12V REFUELLING KIT
Rotary Drum Pump
• Zinc alloy impellars make the pump suitable
for the transfer of diesel fuel, petrol, kerosene,
unleaded petrol and low viscosity oils
• Delivery rates of 18LPM or 0.26 litres per rotation
• Cast alloy body construction ensures a long working
life and smooth operation
• Can syphon and transfer fuels and lubes in reverse,
if and when required
• Includes 2.2 metres of farm tank hose, bung adaptor, rubber gasket for keeping contaminants out of your fuel and lubes, a four chamber rotor assembly, spout and spout holster
Part Number: 501A
Refuelling Drum Pump
•
•
•
•
Rowing action drum pump capable of delivery rates
of 1 litre per stroke or up to 40LPM
Adjustable spout, ABS piston and polypropylene piston seals
make the pump suitable for the transfer of diesel fuel, petrol,
kerosene, unleaded petrol and low viscosity oils up to SAE30
Lockable handle eliminates the possibility of unauthorized
fuel transfer
Two piece pick up tube makes the pump suitable for fuel transfer
out of 60L and 205L drums or fuel tanks up to 1000mm deep
12V Refuelling Kit
• Capable of flow rates of up to 50LPM
• Includes 4 metres of antistatic fuel delivery hose, 2 metres of battery cable,
a stainless steel and brass fuel filter and a manual nozzle
• Maximum head capacity of 15 metres
• Self priming rotary vane pump includes a built-in bypass
• Duty cycle of 30 minutes on, 30 minutes off
• Suction capacity of up to 2 metres
• Ideal for intermittent diesel refuelling applications
• 24V kits also available
Part Number: 52000
PUMPS - SYPHON
Part Number: 5005AN
Bi-Lobe Refuelling Drum Pump
• Flow rates of up to 100LPM
• Ideal for the fast and efficient transfer of diesel, fuel,
petrol and kerosene
• Includes 2.4 metres of UV and fuel resistant hose, metal
nozzle and nozzle holster to keep hose and nozzle off the
ground when not in use
• 10 micron filter prevents contaminants from entering vehicle
and machinery engines
• Bi-lobe design ensures low maintenance costs and easy servicing
Part Number: 5060A
ORDER NOW sales@stealthgi.com
Syphon Pumps
• Easy to prime and start within 6-7 strokes
• All pumps are equipped with a vent cap, opening the cap stops the discharge
Part No
Bung Type
Fits
Length
Discharge
305390
1-1 1/2” for pails
5 L / 20 L pails
533mm
6.5 LPM (2GPM)
305391
Std 2” for drums 50 L / 205 L drums 1125mm 17.5 LPM (5GPM)
305392
Std 2” for drums 50 L / 205 L drums 1155mm
21 LPM (7GPM)
457
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
PUMP - DRUM - SPRING OPERATED
PUMP - OIL TRANSFER - AIR
5:1 Ratio Oil Transfer Drum Pump
•
•
•
•
Spring Operated Drum Pumps
• Spring operated pump and lever action oil control valve facilitates
semi automatic oil transfer
• Includes UV stabilised hose, lever action oil control valve and drain
back nozzle holster
• Robust zinc pump head assembly and ground shafts with O’Ring seals
Part No.
Description
Per Stroke
Part Number
Description
347120
Suitable for bulk tank applications
348120
Suitable for 205 litre drums
Drum Size
9928
Lubricant drum pump with hose
330ml
20L
9978
Lubricant drum pump with hose
500ml
60L
PUMP - OIL TRANSFER - HAND
Can service up to 8 hose reels
Maximum free flow of up to 35LPM
3/4” BSP (f) fluid outlet and 3/8” BSP (f) air inlet
Lower air consumption reduces running costs
3:1 Ratio Oil Transfer Drum Pump
• Flow rates of up to 30 litres per minute
• Air inlet pressures between 40 and 145psi
• 1⁄2” BSP (f) fluid outlet and 1/4” BSP (f) air inlet
• Fewer moving parts reduces maintenance costs
Part Number
Description
353120
Suitable for bulk tank applications
354120
Suitable for 205 litre drums
PUMP - OIL TRANSFER KIT - AIR
Oil Pump
Oil Transfer Kit with On/Off Gun
• Fits 20/25 L drums
• Approx. 100mL per stroke
• Suitable for up to SAE 140 oils
* optional CF strainer available for ATF and hydraulic oils (C7-51)
* optional zinc model available for underground mines (C7-01-11)
Item Code: C7-01
•
•
•
•
•
•
•
1:1 ratio pump capable of delivery rates of up to 40LPM
Ideal for the transfer of low viscosity products such as oil,
waste oil, antifreeze and coolant
Includes 3 metres of R1 hose, heavy duty oil control valve
complete with genuine non drip nozzle and bung adaptor
3/4” BSP (f) material outlet
1/4” BSP (f) air inlet
Air flow adjustment valve facilitates oil delivery rate control
Suitable for use in 205 and 60 litre drums
Part Number: 454003N
Oil Transfer Drum Pumps
• Suitable for the transfer of light to medium viscosity lubricants
• Delivers approximately 0.45 litres per stroke
• Fully serviceable
• Telescopic downtube makes the pump suitable for 60 and 205
litre drums
Part Number
Description
304500
No delivery hose assembly and nozzle included
304600
Delivery hose assembly and nozzle included
458
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Oil Transfer Kit with Meter
• Includes a high quality 3:1 ratio pump, 3m x 1/2” ID hydraulic
hose and an electronic resettable meter with totaliser
• Transfer rates of up to 15LPM
• 3/4” BSP (f) material outlet
• 1/4” BSP (f) air inlet
• Suitable for engine, gear, diff and hydraulic oils
• Suits 60 or 205 litre drums
• Oil transfer and metering made easy
Part Number: 454110N
ORDER NOW sales@stealthgi.com
Lubricants, Chemicals & Fuels
PUMP - OIL TRANSFER KIT - BATTERY
PUMPS - OIL TRANSFER KIT - DRUM
12V Mobile Oil Transfer Kit
• Maximum flow rates of up to 20LPM
• Flow rates of up to 6LPM
• A built-in pressure switch allows the pump to
start and stop automatically
• A heavy duty trolley mobilises 205 litre drums
and is complete with nozzle support and drip collector
• The unit includes a self-priming gear pump with a 12VDC electric motor, an integrated battery charger, a heavy duty trolley 3 metres of delivery hose and an electronic oil meter
Part Number: 263210
PUMP - OIL TRANSFER KIT - MOBILE
AdBlue 205 Litre Drum Kit
• Flow rates of up to 35LPM
• Stainless steel base easily attaches to and detaches from 205L drums
• 3/4” hose tail connections
• Kit includes heavy duty self priming 240V membrane pump, manual nozzle, 4 meter delivery hose, 1.5 meter suction hose, IBC adaptor kit and nozzle holster
• Weight of 15kg
Part Number: 201351
PUMP - OIL TRANSFER - TANK
Mobile Oil Transfer Kit
• Supplied with 3:1 air operated oil pump, 8 metre hose reel, electronic meter and heavy duty drum trolley
• Facilitates quick, efficient and e
ffortless oil transfer in car, light commercial vehicle and truck workshops
• Adjustable flow rates up to 10LPM
• 3:1 ratio oil pump suits 205 litre drums
• Electronic oil meter maximum pressure of 1,000psi
Part Number: 378110
PUMP - OIL TRANSFER KIT - STATIONARY
240V Oil Transfer Pump
• Suitable for the transfer of engine, gear, diff and hydraulic oils
• Flow rates up to 25LPM
• Vane type pump with sintered steel rotor and resin vanes
• 3/4”BSP inlet and outlet
• Continuously rated with pressures up to 85psi
Part Number: 334900
Stationary Pump,
Reel and Meter Kit
• Includes a 3:1 ratio drum pump, 10 metre
hose reel, electronic meter and a 2 metre pump
to hose reel connection hose
• Adjustable flow rates of up to 10LPM
• 3:1 ratio pump suits 205 litre drums
• Electronic resettable oil meter is powered
by easy to replace AAA batteries
• Dual pedestal hose reel withstands angular
hose pull
• Everything you need to quickly and easily
upgrade your o
il dispensing and metering system
Part Number: 454600
ORDER NOW sales@stealthgi.com
Oil Transfer Tank Pumps
• DC self priming gear type oil transfer pump complete
with integrated by-pass valve
• Flow rates of up to 10LPM
• Operating pressures up to 70psi
• 3/4” BSP (f) inlet and outlet
Part Number
Description
309010
12V
310010
24V
459
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
Lubricants, Chemicals & Fuels
STORAGE & TRANSFER - FUEL
STORAGE & TRANSFER KIT - OIL
Diesel Fuel Storage and Dispensing Kit
• Storage and dispensing kit consists of a Piusi diesel fuel drum pump (up to 45LPM), 4m fuel delivery hose, 2m battery cables, nozzle and nozzle holster
Part Number
Storage Capacity
Nozzle
40040PA
400L
Auto
40045P
400L
Manual
IBC Oil Storage and Transfer Kit
• Unit includes a 1,000 litre IBC container, 3:1 ratio pump, hose reel inclusive of 10 metres of hose, a top mounting bracket and an electronic oil meter
• Environmentally friendly as costly and time consuming empty 205L drum disposal is no longer required
• Refillable, reusable, mobile and fully transportable
• 3:1 ratio pump facilitates flow rates of up to 18LPM
• Dual pedestal hose reel provides a long service life
• Electronic oil meter powered by quickly and easily replaceable AAA batteries
• Oil storage and dispensing of the future
Part Number: 454695C
Diesel Fuel Storage and Dispensing Kit
• Storage and dispensing kit consists of an GPI h
eavy duty 12V diesel fuel drum pump (up to 56LPM), 3m fuel delivery hose, 4.6m battery cables,
nozzle and nozzle holster
Part Number
Storage Capacity
Nozzle
40049GA
400L
Auto
40056G
400L
Manual
AdBlue IBS Storage and Dispensing Kit
• Flow rates of up to 35LPM
• Heavy duty self priming 240V membrane pump e
nsures years of trouble
free operation
• Manual shut off nozzle
• Self contained on a stainless steel base with nozzle holder the kit is easily moved from one IBC to another
• 6 meter long delivery hose and 1.5 meter long suction hose, IBC adaptor kit and nozzle holster supplied inclusive
• Pump duty cycle of 20 minutes on, 20 minutes off
460
Part Number: 201220
© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
ORDER NOW sales@stealthgi.com