UD Trucks - Condor

TYPICAL APPLICATIONS
Skip/tanker
Tray-body
Pan/Tautliner(sensitivefreight)
Tipper and Trailer
Tilt tray
PERFORMANCE (Calculated)
6 speed MPS manual with 5.571 diff ratio
and 11R 22.5 tyres
6 speed Allison automatic with 6.166 diff
ratio and 11R 22.5 tyres
9 speed Eaton manual with 4.625 diff
ratio and 11R 22.5 tyre
Max road speed
100km/h (ADR65/00 – speed limited)
100km/h (ADR65/00 – speed limited)
100km/h (ADR65/00 – speed limited)
Gradeability 1st gear
40.4% @ 16500kg
55.8% @ 16500kg
68.4% @ 16500kg
Gradeability top gear
3.1% @ 16500kg
2.8% @ 16500kg
3.3% @ 16500kg
Estimated rpm @ 100km/h
2281rpm
2104rpm
2428rpm
SPECIFICATIONS
GENERAL SPECIFICATIONS (Approximate)
6 speed
Turning radius
(kerb to kerb)
FHR2 (lowered
height)
FHR2
FHF2
GC2
CA
ROH
RT
FT
OH2
OW
OL
WB
Total Tare1
RA1
H
3095
1965
5060
4500
7625
1850
3613
8000 PK17280H6A
3150
2085
5235
5550
9425
2600
4663
9600 PK17280N6A
3175
2100
5275
6050 10125
2800
5163
3260
2200
5460
6450 10625
2900
5563
R
16500 20500
2472
2734
1934
1860
266
965
984
939
3130
1955
5085
4500
7625
1850
3613
8000 PK17280HAA
3155
1975
5130
4900
8130
1955
4013
8600 PK17280KAA
9425 2472
16500 20500
3190
2070
5260
5550
3210
2090
5300
6050 10125
2734
1934
1860
266
965
984
939
2600
4663
2800
5163
10400 PK17280RAA
11100 PK17280SAA
S
3300
2185
5485
6450 10625
2900
5563
3060
1970
5030
4500
7625
1850
3613
8000 PK17280H9A
N
3130
2070
5200
5550
9425
2600
4663
9600 PK17280N9A
3150
2090
5240
6050 10125
2800
5163
3225
2200
5425
6450 10625
2900
5563
16500 20500
S
2472
2734
1934
1860
GCM**
20500kg
Opt GCM**
26000kg – 6 speed (on application)
32000kg – Automatic (on application)
32000kg – 9 speed (on application)
Transmission
Suspension
206kW @ 2500rpm
883Nm @ 1400rpm
6 speed manual
9 speed manual
6 speed automatic
Hendrickson air bag
9600 PK17280NAA
H
R
16500kg
10400 PK17280R6A
K
N
Power
Torque
GVM*
11100 PK17280S6A
H
R
9 speed
UD order code
N
S
Automatic
FA1
Vehicle Dimensions (mm)
GCM**
GVM*
Variant
Wheelbase
code
Mass (kg)
SERIES
266
965
984
939
10400 PK17280R9A
11100 PK17280S9A
Mass is an estimation only based on standard model, includes fluids (not diesel fuel or AdBlue), STC and spare, excludes tools and driver.
² Based on vehicle with standard 295/80R 22.5 front and 11R 22.5 rear tyres.
1
Note: PK 17 280 cab chassis shown – may not be representative of actual vehicle
Note: PK 17 280 photo and drawing shown, may not be representative of actual truck
WARRANTY
Standard warranty+
36 months/200000 kms
+ For details refer to your UD Trucks New Vehicle Warranty brochure Pub No. AUS000273
Cab corrosion warranty+
36 months/unlimited kms
Extended warranty++
36 months/350000 kms
++ Covers selected items only. For details refer to your UD Trucks Extended Protection Plan brochure
Pub No. AUS000472
ECO FLEET
SAFETY
FEATURES
SCR engine emission technology
SRS driver’s air bag with seat belt pretensioner
Class leading 50 litre AdBlue tank capacity
ECE-R29 Cab strength compliant
Touch screen multimedia audio system
with NAVTEQ satellite navigation
ADR80/03 compliant – Euro 5 emission
standard
ADR84/00 (ECE-R93) integrated Front Underrun
Protection (FUPS)
Automatic transmission with EcoFleet shift mode
Taper roller brake system with ABS
Newest Japanese MD-T cab with latest
aerodynamic “low drag” performance
Issue date
August 2012
6500kg front axle capacity
Cruise control
RE-PTO capability on all models
Electrically operated and heated mirrors
ADR42 compliant sleeper cab with mattress
360° visibility (by using up to 3 optional cameras)
Custom factory cab paint option
NOTES: *Rated GVM and axle capacities are subject to Federal, State and Territory legal requirements. **OPT higher GCM requires UD Trucks engineering approval. See your UD Trucks dealer.
DISCLAIMER: Imported and distributed by Volvo Group Australia Pty Ltd (ABN: 27 000 761 259). Photos for illustration purposes. Volvo Group Australia Pty Ltd reserves the
right to modify design and change equipment without previous notification. Please consult with your UD Dealer for the latest information about vehicle specifications.
Bluetooth “hands free”
www.udtrucks.com.au
ENGINE
TRANSMISSION/S
UD Trucks
6 speed Manual
Model
GH7TB
Make
UD Trucks
Description
4 cycle, direct injection, diesel engine with overhead cam,
4 valves per cylinder, water cooled and intercooler with
turbocharging system.
Model
Description
Cylinders
6 in-line
Total piston displacement
7013cc (7 litres)
Bore x stroke
110mm x 123mm
Compression ratio
17.5:1
Max. Power (ECE Net)
206kW (280ps) @ 2500rpm
Max. Power (JIS Gross est.)
214kW (291ps) @ 2500rpm
Max. Torque (ECE Net)
883Nm (651lb/ft) @ 1400rpm
Max. Torque (JIS Gross est.)
917Nm (676lb/ft) @ 1400rpm
Max. governed engine speed
PTO capability
2600rpm
6 speed AUTOMATIC
Shift type
Gear ratios
1000
MPS63B
Mounting type
Spring suspended cab with 2 dual acting shock absorbers
Six forward speeds and one reverse, synchromesh 2nd to
6th gears. Non-synchro 1st and reverse
Crash test standard
ECE-R29 compliant
Cab paint
Standard – Jumping White (W33)
Mechanically operated shift with air servo assist
Doors
90° opening, steel construction with side intrusion beams
Inspection points
All daily inspections can be carried out without lifting the
cab from the front opening inspection panel
1st
7.03
4th
1.50
2nd
4.28
5th
1.00
Model
3060P
Description
Gear ratios
600
120
Torque (Nm)
160
0.78
Electronic push button controller
1st
3.49
4th
1.00
2nd
1.86
5th
0.75
1.41
6th
Rev
5.03
1100
1400
1700
2300
0
2600
RPM
Lubrication system
Compressed air system
Cooling system
Forced oil feed by gear pump, flat tube oil cooler, full flow
and bi-pass oil filters with replaceable elements and 17
litre capacity
Axle
6500
11500
Steering/suspension
6500
10000
Bumper type
2 piece pressed steel and fibre-glass air dam front bumper
Tyres
7100
11600
Mirrors
Max. ground capacity*
6500
10000
Heated and electrically operated LH and RH main mirrors
with wide vision spot mirrors and passenger side down
facing spot mirror
Lamps
Halogen multi-reflector head lamps
ADR49/00 bumper mounted fog lamps
ADR49/00 roof mounted clearance lights
Glass
Tinted front, side and rear
Wipers
Double arm, 2 speed wipers with intermittent operation
and integrated washers
Reversing system
Rear facing reverse light and audible warning alarm
Optional – remote mounted camera with microphone (see
Dealer Options list)
BRAKES
Type
WABCO Anti-lock Braking System (ABS)
Description
Full air brake, dual line system, with aluminium air tanks,
automatic adjusting taper roller drum brakes, 4 channel
ABS
Air pressure
7.2-8.5kg/cm2
Front
Rear
Total
Drum diameter
410mm
410mm
Lining area
2480cm2
3648cm2
Park brakes
Hand operated pneumatically controlled spring park brake
on drive axle
Auxiliary brake
Butterfly type exhaust brake
6128cm2
0.65
Nine forward synchromesh speeds and one non-synchro
reverse.
Front tyres
Single 295/80R 22.5 Dunlop SP350, regroovable
Air conditioning
Adjustable temperature control with multi speed fan
Shift type
Mechanical remote control operated shift
Rear tyres
Dual 11R 22.5 Dunlop SP431, regroovable (H wheelbase
only)
Dual 11R 22.5 Dunlop SP343, regroovable (except H
wheelbase)
Audio system
Double DIN sized, AM/FM/CD 4.8" Touch screen
multimedia system with USB, SD card and Bluetooth
capability
Cup holders
Spare tyre
Single 295/80R 22.5 Dunlop SP350, regroovable
mounted on spare tyre carrier (STC) at rear of chassis
2 centre mounted cup-holders
RH and LH door mounted bottle-holders
Additional 2 back of centre seat cup-holders
Storage
Driver and passenger overhead consoles (6 litres each)
with lids
10 litre back of centre seat storage box with lid
Driver and passenger door pockets
Power outlet
24 volt 240W cigarette lighter/power outlet
DIN accessory fitment
Two DIN sized compartments for accessory fitment
Floor covering
Vinyl
Gear ratios
1st
12.64
Rev
13.21
2nd
8.81
6th
2.48
3rd
6.55
7th
1.85
4th
4.77
8th
1.34
FRAME
Construction
Ladder, channel type double skin chassis construction
5th
3.55
9th
1.00
Width
860mm
Side rail dimensions
250 x 80 x 8mm plus 234 x 72 x 3.2mm (except S
wheelbase)
250 x 80 x 8mm plus 234 x 72 x 6mm (S wheelbase only)
Air filtration
Primary dry paper element air filter on RHS under cab
Axle make
UD Trucks
Rail data
Tensile
Yield
Modulus
High mounted RHS air intake
Description
Drop forged steel “I” section beam, reverse “ELLIOT” type
55kg/mm2
48kg/mm2
Refer to Body Manual
Two LHS and one rear openings available
Suspension
Long taper leaf spring with anchor at front and shackle
at rear
Emission standard
ADR80/03 (Euro 5 emission standard)
Dimensions (mm)
80mm x 1400mm
Emission system
Selective Catalytic Reduction (SCR)
Number of leaves
3
AdBlue capacity
50 litre polymer tank with lockable cap mounted on LHS
Spring constant
343N/mm (35.0kg/mm)
Exhaust system
RHS chassis mounted muffler/catalytic converter with
horizontal rear facing exhaust discharge
Shock absorbers
2 telescopic double acting
Max. ground capacity
Refer to the Load Capacity Summary on Page 3
REAR AXLE AND SUSPENSION SYSTEM
Axle make
UD Trucks
Type
Fully floating pressed steel banjo type housing with single
drive
Fully electronic, CAN-BUS instrument system including
speedometer, tachometer (with economical green driving
band), fuel, temperature, AdBlue level and independent
front and rear air circuit pressure gauges. Digital odometer
display with dual trip function.
Final reduction ratio
6 speed manual – 5.571:1
6 speed automatic – 6.166:1
9 speed manual – 4.625:1
Driver assistance
A Driver’s Information System (DIS) displaying useful
vehicle data including: Date/time, engine temp, oil
pressure, voltmeter, trip information, along with service
intervals for engine, transmission, differentials, belts and air
filter. Electronic stalk mounted cruise control. GPS satellite
navigation with NAVTEQ “truck” mapping
Dry single organic plate with push type diaphragm
AIR SUSPENSION
380mm
Description
Hendrickson HAS230 – Road Friendly compliant
Mechanism
Hydraulically operated with air assistance
Air spring diameter
320mm
Number of springs
2 air bags
Spring constant
125N/mm (12.8kg/mm)
Shock absorbers
2 telescopic double acting
Road Friendly Certification
Number (RFCN)
RF2005
Control system
WABCO ECAS (Electronic Controlled Air Suspension) with
programmable remote control in cab
Max. ground capacity
Refer to the Load Capacity Summary on Page 3
2.35:1
Instrumentation
SRS driver’s steering wheel air bag
SRS driver’s seat belt pretensioner
ECE-R29 cab crash compliance
ADR84/00 (ECE-R93) Front Underrun Protection System
compliance (FUPS)
ABS – Anti-lock Brake System
Up to 22 visual warning lamps plus up to 38 different
written warnings displayed on the LCD screen. In
conjunction 13 audible tones are used
Disc diameter
Stall torque ratio
Safety equipment
Warning systems
Description
One stage, three element, polyphase. Includes standard
integral damper with lock-up function
STANDARD DRIVER AIDS
Single reduction, hypoid gear
UD Trucks
Description
www.udtrucks.com.au
Gear type
Make
TC 415
Remote keyless central locking
Description
Pressed steel disc type 8.25in x 22.5in rim with 165mm
offset and ISO 10 stud pattern (335mm PCD)
Pressed high tensile carbon steel
Model
Power operated door glass
Security
Wheels
Material
Allison
Side windows
WHEELS AND TYRES
ES11109
FRONT AXLE AND SUSPENSION SYSTEM
Make
ADR42/04 compliant sleeper bunk with mattress (suitable for stationary sleeping). Sleeper bunk cab curtain
rails with curtains
Eaton
PTO capability
TORQUE CONVERTER (automatic models only)
Sleeping capability
Model
200 litre steel tank with lockable cap mounted on LHS
chassis
CLUTCH (manual models only)
Flat folding LH assistant seat with lift up base
Flat folding centre seat with back of seat storage
Make
Chassis mounted primary and engine mounted secondary
130 amp with built in IC regulator
Passenger seat(s)
460mm diameter with ignition key steering lock
Capacity
Alternator
CVG multi-adjustable, air suspended with automatic height control and 7 position adjustable shock absorber
Steering wheel
Filtration
2 x 12 volt 120 Ah batteries mounted on LHS chassis
Driver’s seat
Adjustable, tilt and telescopic control
Ultra high pressure common rail injection system
Battery capacity
3 occupant seats – 2 outer seats with retractable 3 point
ELR seat belts, centre seat with adjustable lap belt
22.42:1
Injection type
24 volt, negative ground system
Standard seat capacity
Column
Forced feed by centrifugal water pump, wax pellet type
thermostat with bypass. Aluminium corrugated fin type
radiator with cab front bonnet mounted reserve tank and a
600mm diameter 11 blade viscous coupling cooling fan
ELECTRICAL
Power
Single ON/OFF/DOOR interior light with an independent
720mm x 140mm fluorescent lamp
Steering gear ratio
Water cooled reciprocating type, single cylinder air
compressor with air dryer
EXHAUST AND EMISSION CONTROL
Lighting
Flywheel type drive with LHS and RHS openings
660Nm using one opening, or 930Nm total using both
openings
FUEL AND INTAKE SYSTEM
Air intake
INTERNAL CABIN
Recirculating ball and screw with hydraulic assist
200
2000
Rear (kg)
STEERING
9 speed MANUAL
0
800
Front (kg)
Type
PTO capability
SHIFT RANGE
6th
7.04
Six forward speeds and one reverse. Fully automatic
Allison Gen4 adaptive shift with Power and EcoFleet
modes
3rd
400
80
2.49
Rev
LHS 300Nm @ 100% engine speed (nominal ratio)
Allison
Shift type
800
Power (Kw)
Aerodynamically designed, forward control, pressed
steel construction cab with 45° torsion bar cab tilt
Make
200
40
Description
3rd
GH7TB
240
EXTERNAL CABIN
LOAD CAPACITY SUMMARY
Make
FACTORY OPTIONAL EQUIPMENT (Indent order)
Suspension
Multi-leaf front springs 294Nm/mm (29.9kg/mm)
Fuel capacity
200 litre LHS chassis mounted auxiliary tank with lockable
cap (except H wheelbase)
Seating
Large centre console (replaces centre seat)
Engine/PTO control
Electronic engine governor control with external control
lever
Cab paint
20 x factory option colours
Custom paint colours (up to 3 colours per cab)
DEALER FIT OPTIONAL EQUIPMENT
Rear engine PTO
343Nm torque capacity @ 120% engine speed
343Nm torque capacity @ 85% engine speed
PTO
Transmission
Fleet management
GPS-based fleet management system
Cameras
Up to 3 cameras connected to the in-dash multimedia
system
Other
Refer to your UD Trucks Accessories brochure
www.udtrucks.com.au