INTEVIO Public Address and Voice Alarm INTEVIO Amplifier HAM-2000 About The INTEVIO Public Address And Voice Alarm Range Honeywell’s INTEVIO Public Address and Voice Alarm system is the ideal solution for single buildings. It is an integrated solution that can provide better stability, costsavings, and higher user experience and performance: Features : • Class-D technology, high efficiency and low power consumption • Maximum 500W rated output power • Supports 70V/100V audio outputs • Supports balanced or unbalanced audio inputs • Supports 100V audio input • Forced air cooling • Automatically limits the output voltage • Supports automatic protection and fault detection Description Functions HAM-2000 high efficiency power amplifier provides audio signal amplification for the INTEVIO voice alarm and public address system. It is reliable, efficient and light in weight. HAM-2000 Input/output HAM-2000 supports balanced/unbalanced audio inputs and 100V/70V speaker outputs. It also has a 100V audio input port to connect with the output from other amplifier so that the output power can be increased easily. A contact output is provided to send out the fault status to 3rd system when a fault is detected. Through the RJ45 port, HAM-2000 receives the audio signal and control signal from the controller HCU-2000 or the zone expander HEX-8/HEX-24 and sends back the fault status. Automatic fault detection and self-protection HAM-2000 can self-protect from overheat, overcurrent, overvoltage, undervoltage, overload and short circuit. For example, when the internal temperature reaches its critical limit, the overheat protection circuit will shut down the power amplification module and activate the protection indicator light on the front panel. HAM-2000 can detect power supply errors automatically during operation. The built-in fuse will provide overcurrent protection to the main power supply. When a shout circuit is detected in the main power circuit, the power will be automatically shut down and the backup power will then be enabled to replace the main one. F E AT U R E S & B E N E F I T S •500W high efficiency Class-D amplifier •High flexibility: with 100V/70V output & 100V audio input •Enhanced reliability: automatic fault detection, self-protection & forced air cooling fan HAM-2000 Technical Specifications PARAMETERS VALUES MAIN POWER SUPPLY VOLTAGE ~ 220V-240V 50/60Hz BACKUP POWER SUPPLY VOLTAGE ~ 220V-240V 50/60Hz POWER CONSUMPTION <720W MAIN POWER SUPPLY FUSE T10AH 250V AMPLIFIER OUTPUT 70V / 100V RATED OUTPUT POWER 500W FREQUENCY RESPONSE 80Hz~18KHz (+1dB ~ - 3dB) INPUT IMPEDANCE 20KΩ INPUT SENSITIVITY(RJ-45) 1.4V AUX. INPUT 1 1.4V AUX. INPUT 2 100V AUDIO CASCADE OUTPUT 1.4V SNR 100 dB ±5％, A weighted NON-LINEAR DISTORTION <0.1% (at 1/3 rated power, 1kHz) INDICATOR LIGHTS Power, main power fault, backup power fault, protection and signal level indicator. COOLING METHOD Air cooling HUMIDITY < 95%, without condensing OPERATING TEMPERATURE -10°C~+55°C(14°F to +131°F) STORAGE TEMPERATURE -40°C~+70°C(-40°F to +158°F) PRODUCT DIMENSION (W*H*D) 482 mm×88 mm ×407 mm PACKAGE DIMENSION (W*H*D) 580 mm×235 mm ×552mm NET WEIGHT 10.6Kg GROSS WEIGHT 13.2Kg Certifications and Approvals CATEGORY REGION CERTIFICATION SAFETY Europe CE Certified SAFETY Global CB Certified Ordering Information DESCRIPTION MODEL# AMPLIFIER HAM-2000 Honeywell Home and Building Technologies Greater China Building Business HBT-G.C.-HAV-RK2-HAM-2000-EN-Jun.2017-EN01 ©2017 Honeywell International Inc. Note: Honeywell reserves the right, without notification, to make changes in product design and/ or specifications.