Super Close Projection System SCP716W

3
Super Close Projection System
SCP716W
Operator’s Guide
August 2009 • 78-6971-1489-6-A • Copyright © 2009, 3M Company. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Contents
Introduction
Safety Information
Intended Use ..................................................................................................................................................9
Safety Labels ...............................................................................................................................................12
Contents of Shipping Box
Keep Your Packing Materials ......................................................................................................................13
What’s Next?................................................................................................................................................13
Product Description
Machine Characteristics...............................................................................................................................14
Dimensions ..................................................................................................................................................14
Projector Distance from Screen and Image Size .........................................................................................15
Vertical Lens Shift .......................................................................................................................................15
Parts Identification .......................................................................................................................................16
Projector Terminal Connections ..................................................................................................................16
I/O Module Control Panel (optional accessory) ..........................................................................................17
Top Terminal Panel on I/O Module .............................................................................................................17
Bottom Terminal Panel on I/O Module .......................................................................................................18
Remote Control Functions ...........................................................................................................................19
Installing Batteries in Remote Control ........................................................................................................20
Setup and System Configuration .................................................................................................................20
Operating Instructions
Projector Start Up ........................................................................................................................................21
Stand By Mode ............................................................................................................................................21
© 3M 2009. All Rights Reserved.
3
ENGLISH
Thank You for Choosing 3M Equipment.......................................................................................................5
Important Notice ............................................................................................................................................5
Warranty; Limited Remedy; Limited Liability..............................................................................................5
What 3M Will Do To Correct Problems:.......................................................................................................6
Product Patents ..............................................................................................................................................7
Regulatory Notices ........................................................................................................................................7
Operator’s Guide
3M™ Super Close Projection System SCP716W
Menu Navigation
ENGLISH
Main Menu...................................................................................................................................................22
Input Menu...................................................................................................................................................23
Picture Menu ................................................................................................................................................24
Advanced Picture Menu ..............................................................................................................................25
Audio Menu .................................................................................................................................................26
Setup Menu ..................................................................................................................................................27
Advanced Setup Menu .................................................................................................................................28
Information Menu ........................................................................................................................................29
Machine Specifications
Lamp Replacement ......................................................................................................................................31
Troubleshooting
Common Problems and Solutions ...............................................................................................................32
Projector Indicator Lights ............................................................................................................................33
I/O Module Indicator Lights ........................................................................................................................33
Replacement Parts and Accessories
Replacement Parts........................................................................................................................................34
Optional Accessories (not shown) ...............................................................................................................34
4
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Introduction
Thank You for Choosing 3M Equipment
ENGLISH
This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and
trouble free use in the years to come. For optimum performance, please follow the operating instructions
carefully. We hope you will enjoy using this high performance product in your classroom, meetings,
presentations, and training sessions. This product is Class A and can not be sold into the home market.
Trademarks
The 3M logo and 3M are registered trademarks of 3M Company. Vikuiti is a trademark of 3M Company. Digital
Light Processing is a trademark or registered trademark of Texas Instruments. All other trademarks or registered
trademarks are property of their respective companies. HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you
must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product which are not contained in 3M’s current
publications, or any contrary statements contained on your purchase order shall have no force or effect unless
expressly set forth in a written agreement signed by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability
This warranty applies to the continental US only. The warranty terms, conditions, remedy and limitation may
vary in other countries. Contact your local 3M Company for warranty information.
The 3M SCP700 Series projector (the “3M Product”) is warranted to be free from defects in material or
manufacture for a period of three (3) years from the date of purchase or 4,000 hours of usage, whichever
occurs first.
All other accessories of the 3M Product (those in the applicable modular configurations), excluding the projector
lamps, but including the wall mounts, ceiling mounts, digital annotation sensors, and input/output devices
are warranted to be free from defects in material or manufacture for a period of one (1) year from the date
of purchase.
The lamp component of the 3M Product is warranted to be free from defects in material and manufacture for a
period of ninety (90) days after the date of purchase of the 3M Product or 180 hours of lamp usage, whichever
occurs first. This warranty is for parts only and in the case of an approved warranty claim for a lamp; your
exclusive remedy will be for a replacement product shipped to your location.
Optional product upgrades and/or accessories that are not sold as part of any modular configuration are subject to
individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND
ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY
INDUSTRY PRACTICE OR CUSTOM OR TRADE USAGE.
In the event the 3M Product fails to conform to the above stated warranties within the applicable warranty period,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase
price of the 3M Product. All replaced parts or products become property of 3M. If the product is repaired, 3M
will repair the defective part(s) with a new or used part(s). If the 3M Product is replaced, 3M will replace the 3M
Product with the same or equivalent model and with a new or refurbished 3M Product. In the case of an approved
warranty claim, the replacement 3M Product will carry only the remaining term of the original 3M Product’s
© 3M 2009. All Rights Reserved.
5
3M™ Super Close Projection System SCP716W
Operator’s Guide
ENGLISH
warranty period as stated above. For warranty service, you must provide proof of the date of the original
purchase else the manufacturing code date will be used to establish the start date of the warranty. The
following are exclusions to the above listed warranty:
a. This warranty does not cover 3M Product that is modified or damaged through improper storage, misuse,
abuse, accident, vandalism, improper installation, neglect, improper shipping, damage caused by acts of war,
disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with
non-3M products, or service other than by a 3M Authorized Service Provider, neglect or mishandling by any
person. Normal wear and tear is not covered under warranty.
b. 3M Product is designed to operate in the typical indoor environment. This warranty does not cover 3M
Product used outside of the following circumstances:
• 100V-240V AC, 50/60 Hz
• Office (or similar) Environments with low levels of smoke or air born particulates.
Altitude
Temperature
Humidity
0-4000 ft (normal fan speed)
5°C - 35°C (41°F - 95°F)
4000-6000 ft (high fan speed)
5°C - 35°C (41°F - 95°F)
25% to 80%
(non-condensing)
• Storage conditions: -20°C to 60°C, maximum 40,000 ft.
c. The Air Intake and Exhaust Vent must be clear of obstructions, including any potential blockage or
obstructions caused from a ceiling or other mount. Inadequate air ventilation will cause the 3M Product to
malfunction or will cause damage to the 3M Product which will void the warranty.
d. This warranty does not cover any additional costs including, but not limited to, those associated with
removal, cleaning or installation of the 3M Product, adjustments, (mechanical or electronic) made to the 3M
Product or replacing customer replaceable parts like lamps and air filters.
e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use causes
strain and is not considered normal use.
f.
This warranty does not cover consumables (e.g., fuses), other than lamps and only as set forth below.
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be
removed unless otherwise stated in writing for the purpose of private labeling for partnership requirements.
i.
This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M Product
for warranty service. Said costs are the customer’s responsibility. If a claimed defect cannot be identified or
reproduced in service, the customer may be held responsible for cost incurred. Should your warranty upgrade
include a “change out” service and the claimed defect cannot be identified or reproduced by the technician,
the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M PRODUCT
MANUAL OR FAILURE TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S INTENDED
USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL
NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING
FROM, OR IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M
PRODUCT. This limitation applies regardless of the legal theory upon which damages are sought.
6
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
For warranty support, please call or write your local 3M office or a 3M Authorized Service Provider to obtain
RMA # (Return Material Authorization Number) before returning the product. If you are inside the Continental
United States of America, please contact 3M Customer Service at 800-328-1371 or email meetings@mmm.com.
What 3M Will Do To Correct Problems:
• 3M will, at its option, repair or replace the defective unit without charge for parts or labor. Return of the
3M Product will be at 3M’s expense.
• When warranty service involves the exchange of the 3M Product or of a part, the item replaced becomes
3M property.
• The exchanged 3M Product or part may be new or previously refurbished to the 3M standard of quality, and at
3M’s option, the replacement may be another model of like kind and quality.
• 3M’s liability for replacement of the warranted 3M Product or part will not exceed the original retail selling
price of the 3M Product. Exchange or replacement products or parts assume the remaining warranty period
of the product covered by this limited warranty. However, each replacement lamp carries the limited 90-day
warranty stated above.
Product Patents
This product is covered by one or more of the following patents:
U.S. Patent Number D555,184
U.S. Patent Number 7,123,426
U.S. Patent Number 7,126,767
U.S. Patent Number 7,271,964
Regulatory Notices
Video signal cables: Only use cables delivered by the manufacturer.
FCC STATEMENT - CLASS A: This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Instructions to Users: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Notice: This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le materiel brouilleur du
Canada.
Instructions to Users: This equipment complies with the requirements of FCC equipment provided that the
following conditions are met. The cables may have to be used with the core set to the projector side. Use the
cables which are included with the projector or specified.
© 3M 2009. All Rights Reserved.
7
ENGLISH
• If your 3M Product requires service, 3M will ask you to bring or send the 3M Product, securely packaged in its
original container or equivalent, along with proof of the date of original purchase, to your 3M Service Dealer or
3M Service Center.
Operator’s Guide
3M™ Super Close Projection System SCP716W
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
ENGLISH
CE STATEMENT
Electromagnetic Compatibility Statement: Meets 2004/108/EC Directive
Low Voltage Directive: Meets 2006-95-EC Directive.
WEEE STATEMENT: The following information is only for EU-members States: The mark shown
to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC
(WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal
waste, but use the return and collection systems according to local law.
RoHS STATEMENT: 3M Projection Systems can provide RoHS certification for products meeting the
RoHS directive.1
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC.
1
RoHS compliant means that the product or part does not contain any of the substances in excess of the
following maximum concentration values in any homogeneous material, unless the substance is in an application
that is exempt under RoHS, as amended:(a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. This
information represents 3M’s knowledge and belief, which may be based on information provided by third party
suppliers to 3M.
8
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Safety Information
ENGLISH
Please read, understand, and follow all safety information contained in these instructions prior to the use of this
projector. Retain these instructions for future reference.
Intended Use
Before operating the machine, please read the entire manual thoroughly. This product was designed, built and
tested for use indoors, using 3M lamps and hardware. The use of other replacement lamps, outdoor operation or
different voltages has not been tested and could damage the projector or peripheral equipment and/or create a
potentially unsafe operating condition.
This projector is designed to operate in a normal office/classroom environment.
Altitude
Temperature
Humidity
0-4000 ft (normal fan speed)
5°C - 35°C (41°F - 95°F)
4000-6000 ft (high fan speed)
5°C - 35°C (41°F - 95°F)
25% to 80%
(non-condensing)
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can
affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Explanation of Signal Words and Symbols in Safety Labels and Instructions
WARNING: Indicates a potentially hazardous situation, which if not avoided, could
result in death or serious injury and/or property damage.
CAUTION: Indicates a potentially hazardous situation, which if not avoided, may
result in minor or moderate injury and/or property damage.
Warning: Hazardous Voltage
Warning: Hot Surface – High Temperature Lamp
Warning: High Pressure
Attention: Read Accompanying Documentation
© 3M 2009. All Rights Reserved.
9
Operator’s Guide
3M™ Super Close Projection System SCP716W
ENGLISH
 WARNING
To reduce the risk associated with hazardous voltage:
• Do not operate this projector in wet environments or outdoors.
• Do not modify this projector or power cord.
• Do not remove any screws other than those specified in the lamp replacement instructions.
• Do not attempt to service the projector other than the lamp cartridge. There are no user serviceable
parts inside the projector.
• Contact a 3M authorized service provider for service.
• Disconnect power cord when the projector is not in use for extended periods of time, during lamp
replacement, and while cleaning.
• Do not allow water or other liquids to enter the projector.
To reduce the risk associated with hazardous voltage and/or fire:
• Replace power cord if damaged.
• Contact a 3M authorized service provider if the projector becomes damaged.
• Use a grounded extension cord with a rating at least equal to that of the projector.
• Connect this projector to a grounded outlet.
To reduce the risk associated with choking:
• Keep the battery and battery cover away from children and pets.
To reduce the risk associated with lamp rupture related hazards:
• In event of lamp rupture, call 3M authorized service provider for repair. Ruptured lamp repair is not
user serviceable.
• Wash your hands thoroughly if contact with ruptured lamp debris has taken place.
• Ventilate the area where the lamp rupture occurs. The lamp operates at high temperature.
To reduce the risk associated with hazardous voltage, impact, tripping, or intense visible light:
• Do not use this projector around unsupervised children.
To reduce the risk associated with sharp objects, premature lamp failure, exposure to mercury:
• Always handle the fragile lamp module with care.
• Replace the lamp module when the lamp replacement message appears.
• Never replace the lamp module with a previously used lamp module.
• Remove the projector from the ceiling or wall mount before replacing the lamp.
10
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
 CAUTION
To reduce the risk associated with intense visible light:
• Avoid looking directly into the projector lens while the lamp is on.
ENGLISH
To reduce the risk associated with impact of a falling projector:
• Use only the 3M brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired.
• Installation of the 3M brand wall/ceiling kit must only be performed by qualified personnel.
• Adhere strictly to the proper installation procedure as outlined in the installation instructions when
installing the 3M Wall/Ceiling kit.
• Always operate the unit on a flat and sturdy surface.
To reduce the risk associated with explosion, and/or chemicals from leaking battery:
• Use only with battery type AAA.
• Orient the battery’s plus (+) and minus (-) terminals according to the markings found on the remote
control.
• Do not leave the battery in the remote for an extended period of time.
• Do not heat, disassemble, short, recharge, or expose the batteries to fire or high temperature.
• Do not carry batteries loose in your pocket or purse.
• Avoid eye and skin contact in the event that battery would leak.
• Do not mix used and new batteries.
To reduce the risk associated with tripping, and/or impact:
• Position the power cord and cables so that they can not be tripped over.
To reduce the risk associated with environmental contamination:
• Dispose of mercury lamp, exhausted batteries, and other electronic components in accordance with
applicable federal, state and local regulations.
To reduce the risk associated with hot surface of lamp cartridge:
• Before replacing the lamp, allow the lamp to cool for 60 minutes and then unplug the projector
from the electrical outlet.
To reduce the risk associated with environmental contamination due to mercury:
• Hg: Lamp contains mercury. Don’t throw in trash. Dispose according to local, state, or federal laws.
See www.lamprecycle.org or call 1-800-328-1371.
SAVE THESE INSTRUCTIONS
© 3M 2009. All Rights Reserved.
11
Operator’s Guide
3M™ Super Close Projection System SCP716W
Safety Labels
ENGLISH
The following safety labels are used on this product.
12
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Contents of Shipping Box
ENGLISH
This projector is shipped with the necessary cables required for standard DVD player, PC or laptop computer
connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are
missing, please contact your place of purchase.
The shipping carton contains the following items illustrated below. If any of these items are missing, please
contact your place of purchase.
1. Projector
2. Remote Control Transmitter (AAA batteries included)
3. VGA to VGA cable, 1.8m (15-pin Male)
4. Power cord
5. Operator’s Guide CD
6. USB A-B cable, 1.8m (not shown)
Keep Your Packing Materials
Save the shipping box and packing materials in the event this product should require shipping to a 3M Service
Center for repair. Use packing material to protect projector.
What’s Next?
Take a few minutes to review the machine characteristics before you setup and operate the projector. We hope
you will enjoy using this high performance product in your classrooms, presentations and training sessions. This
product has been produced in accordance with 3M’s highest quality and safety standards to provide smooth and
trouble-free use in the years to come.
© 3M 2009. All Rights Reserved.
13
3M™ Super Close Projection System SCP716W
Operator’s Guide
ENGLISH
Product Description
The 3M SCP716W integrates short-arc lamp and Digital Light Processing™ (DLP) technology. It accepts input
from computer and/or video sources and projects a bright image through 3M™ Vikuiti™ Super Close Projection
technology.
Machine Characteristics
The 3M SCP716W offers the following features:
•
Native Resolution 1280x800 WXGA
•
On-screen menu with 9 languages (English, French, Deutsch, Spanish, Italian, Japanese, Chinese Traditional,
Chinese Simplified, Korean)
•
Lamp Life of 5000 hours (ECO mode)
•
Lamp Life of 3000 hours (Bright mode)
•
Image size: 34" to 136" diagonal
•
Aspect Ratio: 16:10
•
Digital keystone correction
•
Vertical Lens Shift
•
RS232 Control capable
•
3M Super Close Projection technology
Dimensions
LQ
FP
LQ
FP
LQ
FP
LQ
FP
LQ
FP
LQ
PP
LQ
FP
LQ
PP
LQ
PP
LQ
FP
14
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Projector Distance from Screen and Image Size
Refer to the chart below for the projector-to-screen distance and corresponding projected image size values.
Distance (D)
in
mm
20.61
523.40
27.48
697.87
36.63
930.49
43.96
1116.59
45.79
1163.11
50.37
1279.43
54.95
1395.74
59.53
1512.05
Offset Min (S)
in
mm
0.95
24.23
1.27
32.31
1.70
43.08
2.04
51.69
2.12
53.85
2.33
59.23
2.54
64.62
2.76
70.00
Offset Max (S)
in
mm
2.15
54.52
2.86
72.69
3.82
96.93
4.58
116.31
4.77
121.16
5.25
133.27
5.72
145.39
6.20
157.51
ENGLISH
Image Size
Diagonal Width Height (H)
45.00
38.16
23.85
60.00
50.88
31.80
80.00
67.84
42.40
96.00
81.41
50.88
100.00
84.80
53.00
110.00
93.28
58.30
120.00
101.76
63.60
130.00
110.24
68.90
Vertical Lens Shift
The lens-shift feature will vertically offset the picture from 1¼ in. (30 mm) up to 4 ½ in. (117 mm)
depending on the projector-to-screen distance and size of the projected image. This adjustment is
typically used with wall mount applications as a fine-adjustment to the vertical position of the projected
image. Turn the adjustment screw to vertically raise or lower the physical position of the lens. Refer to
the chart above for the offset values.
Note: The Lens-Shift adjustment screw does not adjust or change any keystone properties.
+
6
LQPP
'
© 3M 2009. All Rights Reserved.
15
3M™ Super Close Projection System SCP716W
Operator’s Guide
Parts Identification
1. Super Close Projection Lens
ENGLISH
2. Focus Adjustment
3. Lens-shift
4. Remote Control IR Sensor
5. Status Indicator Light
6. Standby/On Button
7. Lamp Cover
8. Ventilation Slots
9. HDMI Port
10. Control Input
11. Computer/Component Input
12. Slot for Kensington™ Lock
13. USB Port (For remote mouse functionality)
14. AC Power Cord Connection
15. Height Adjustment Foot
Projector Terminal Connections
$&3RZHU
86%
&RPSXWHU
,20RGXOH&RQWURO
#
Projector Panel
Function
1
A/C Power
Connect AC power cord to projector.
2
USB
Connect projector USB (B-type) to computer USB port to control computer
pointer with remote control.
3
COMPUTER
Input VIDEO signal from a computer source.
4
I/O Module Control
Connect projector control port to computer serial port with RS232 adapter or
the 3M I/O Module and control the projector.
5
HDMI
Connect the projector a HDMI video source or DVI-D video source. The
SCP716W does not connect audio through the HDMI port.
16
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
I/O Module Control Panel (optional accessory)
If your projector has the optional I/O Module installed, the projector functions can be operated from the I/O
Module Control Panel.
ENGLISH
#
I/O Module Control Panel Function
1
ON/OFF
Turns the projector on and off
2
Volume +/-
Increases (+) or decreases (-) audio level
3
Source
Switches the displayed input source. Switching order: Computer 1 =>
Computer 2 => S-Video => Video
4
Menu
Displays the projector’s menu system.
5
Arrow Buttons
Navigate up/down or left/right through projector’s Menu system.
6
ENTER
(Center of Arrow buttons)
Select menu item and confirm menu selections
Top Terminal Panel on I/O Module
Use the Top Terminal Panel to connect the projector to the I/O Module box.
$XGLR
3RZHU
86%86%
&RQWURO6LJQDO
7R3URMHFWRU
$XGLR
2XW
,20RGXOH
#
Top Terminal Panel
Function
1
Audio Power
Relay Audio power (from bottom terminal) through to speaker
amplifier.
2
USB (Hub)
Connect two USB devices (like the projector’s remote mouse) to a
single USB port on computer connected to the I/O Module’s bottom
terminal panel.
3
CONTROL
Connect IO/Module to projector I/O Module CONTROL terminal.
4
Signal
Connect I/O Module to projector COMPUTER port.
5
Audio Out
Connect IO/Module to external speakers or speakers in 3M Folding
Wall Mount FWMSV2.
© 3M 2009. All Rights Reserved.
17
3M™ Super Close Projection System SCP716W
Operator’s Guide
Bottom Terminal Panel on I/O Module
Use the Bottom Terminal Panel to connect the I/O Module box to the Computer/Video source.
ENGLISH
,20RGXOH
#
Bottom Terminal Panel
Function
1
Audio Power
Supplies power to 3M Folding Wall Mount speakers from the power
supply included with the 3M Folding Wall Mount.
2
Computer2/Component2
Input for computer or component video device.
3
Serial RS-232
Passes control commands from a computer or control system to the
projector.
4
Video
Input for composite video devices.
5
RCA Input R/L
Right and Left Channel Audio Input.
6
Stereo Mini 2
Stereo Audio input for Computer2.
7
USB
Connects the two devices connected to the top terminal panel USB ports
to a computer.
8
Ethernet
Allow access to the projector control webpage and control command
over a network remote monitoring & control.
9
Computer1/ Component1
Input for computer or component video device.
10
Computer Out
Output the signal from the Computer 1 port.
11
S-Video
Video device input for S-video
12
Stereo Mini 1
Stereo Audio input
13
Audio Out
Connects selected audio input to active speakers or audio amplifier.
18
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Remote Control Functions
Aim the remote control toward the projection screen or at the IR sensor on the front of the projector. Press
desired remote control button to send a signal to the projector.
Use a USB cable to connect from the PC to the SCP716 or SCP716 I/O Module (if equipped) and aim the remote
control toward the projection screen or at the IR sensor on the projector. Press desired remote control button to
send a signal to the projector.
Remote Control Functions
ENGLISH
ON/STANDBY
ON: Press to turn projector ON.
OFF: Press to display confirmation message, press again
to switch projector to Standby mode.
Note: The confirmation message displays to ensure unit does not get turned off
accidentally.
INPUT/
SOURCE
Press for current input source. Press again to select different
computer/video input.
[ Computer 1/Componet 1 → Computer 2/Componet 2 → RCA Composite Video
→ S-Video → HDMI ]
Volume +:
Press to increase speaker volume.
Volume -:
Press to decrease speaker volume.
Mute:
Menu:
R/Click
Up Arrow
Down Arrow
Left Arrow
Right Arrow
Mouse Pad
Blank:
Freeze:
Timer:
Zoom +:
Zoom -:
Bottom Trigger
Press to switch the audio sound ON or OFF.
Press to display the Main Menu. When a menu is open, press to
exit menu.
Performs remote Right Mouse click function (when USB is
connected to projector USB).
Moves cursor upward through menu items.
Moves cursor downward through menu items.
Moves cursor left through menu items.
Moves cursor to right through menu items.
Allows remote mouse functions.
Allows Pan function when in Zoom mode.
Press to replace projected image with black image. Press again
to return projection image.
Press to freeze current image. Press again to return to active
image.
Press to initiate a 10:00 minute digital timer. Press up/down
arrows to change timer clock by 1 minute intervals up to 99:00.
Press and hold to increase the size of the displayed image up to
200 percent.
Press and hold to decrease size of the displayed image down to
100 percent
Pull trigger for remote LEFT mouse button functions (e.g. Move
.ppt slides forward or backwards). In menu mode, use for
remote Enter / Select functions.
Trigger button is on
bottom of remote
.
.
.
.
.
© 3M 2009. All Rights Reserved.
19
Operator’s Guide
3M™ Super Close Projection System SCP716W
Installing Batteries in Remote Control
1. Push down on cover to unlatch it. Slide cover off.
ENGLISH
2. Install new AAA batteries with the correct polarities.
3. Reinstall battery cover.
Note: Verify the battery cover is fully latched before
using the remote control.
Setup and System Configuration
20
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Operating Instructions
Projector Start Up
For best results, please observe the following start up sequence.
1.
Power ON all of the connected equipment.
2.
Plug the supplied power cord into the AC inlet of the projector.
3.
Press the On/Standby button on the projector or remote control. The lamp will turn on and an image will
appear and grow brighter on the screen.
4.
If the security feature is activated, enter the 4-digit PIN code.
a. Press the left/right arrow to move the cursor through each PIN field.
3,1&RGH
b. Press the up/down arrows to change the value in each field.
5.
c. Press the Trigger button on the remote to enter the PIN access code.
Check all ventilation slots and clear away any obstructions.
6.
Extend or retract front adjustment foot to obtain best image height.
Note: Rotate foot for fine adjustment.
7.
Turn the focus adjustment (top of projector) to obtain the best image sharpness.
Stand By Mode
When an image is not being projected, place the unit into standby mode.
1.
Press the On/Standby button on the Remote Control or the On/Off button on the I/O Box. When the
message “Press the power button to turn the unit off” displays, press the On/Standby button again.
2.
The lamp will switch off and the power button will first turn red indicating the unit is in lockout and then
after 90 seconds the button turns amber to indicate the unit is in standby mode.
Note: In standby mode, the cooling fans will continue to run for 5 minutes and then turn off.
© 3M 2009. All Rights Reserved.
21
ENGLISH
Read the Important Safeguards before operating the SCP716W. After all cable connections have been completed,
refer to Setup and Configuration, the projector can be powered up.
3M™ Super Close Projection System SCP716W
Operator’s Guide
ENGLISH
Menu Navigation
To display the on screen menus, press the MENU button on the remote control or I/O Module. Use the remote
control Up/Down ARROW buttons to select the desired menu (see table below), then pull the TRIGGER button
(bottom of remote control) to display it.
Use the remote control ARROW buttons within a submenu to select the various options displayed on the screen,
then pull the TRIGGER button to initiate that option or setting.
To exit an on-screen submenu, press the MENU button.
Main Menu
The main menu is the first system menu to display when the MENU button is pressed. Click on the menu icons
to display the desired submenu.
0DLQ0HQX
Menu Icon
Menu Description
Input Menu – Select the desired computer or video input source.
Picture Menu – Adjust the following picture features: mode, brightness, contrast, color
intensity, tint, sharpness, video noise reduction, aspect ratio, and menu reset. Note: Displays
only when input source is connected.
Advanced
Advanced Picture Menu – Adjust the following settings for the detected signal source: over
scan, brightness/color, horizontal position, vertical position, frequency, phase, & menu reset.
Audio Menu – Adjust the following audio settings: volume, mute, audio input (stereo mini-1,
stereo mini-2, RCA), menu reset.
Setup Menu – Select or adjust the following settings: menu languages, auto shutoff timer,
keystone, lamp hours, lamp mode, fan mode, projection mode, factory reset, PIN code and
menu reset.
Information Menu – Display the current system information: input resolution, H/V
frequency, lamp hours, system hours, IP address/net mask/gateway for I/O module Ethernet
interface, user revision.
22
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Input Menu
The Input Menu, shown below, is used to select the desired computer or video input source to be displayed on
the projector.
ENGLISH
,QSXW,QSXW6RXUFH&RPSXWHU
&RPSXWHU&RPSRQHQW
&RPSXWHU&RPSRQHQW
5&$9LGHR
69LGHR
+'0,
Feature
Description
Main Input
Select the Input source to be displayed on the projector.
1. Computer 1 / Component 2
[Computer 1 = default]
2. Computer 2 / Component 2
[Displays only when I/O module is connected]
3. RCA Video (Composite video)
4. S-Video
5. HDMI
© 3M 2009. All Rights Reserved.
23
3M™ Super Close Projection System SCP716W
Operator’s Guide
Picture Menu
The Picture Menu, shown below, is used to adjust the picture settings to display the best possible image.
ENGLISH
3LFWXUH,QSXW6RXUFH&RPSXWHU
3LFWXUH0RGH
%ULJKWQHVV
&RQWUDVW
&RORU
+XH
6KDUSQHVV
9LGHR1RLVH5HGXFWLRQ
$VSHFW5DWLR
$GYDQFHG
5HVHW
Feature
Description
Picture Mode
Select the best mode to optimize the
projector image.
(QKDQFHG3KRWRX _ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
2Q
)XOO6FUHHQ
X 1. Max Brightness
2. Enhanced Photo
3. Enhanced
4. Photo
Range
N/A
Default
VGA-Max Brightness
Video-Enhanced Photo
Brightness
Adjust brightness (low to high) of
displayed image
0–100
50
Contrast
Adjust the contrast (dark to light) in the
displayed image
0–100
50
Color *
(see note)
Adjust the intensity of color in the
displayed image
0–100
50
Hue *
(see note)
Adjust the balance of red (-) to green (+)
for video signals.
-15–+15
0
Sharpness
Adjust the displayed image to look sharper
or softer
-15–+15
0
Video Noise Reduction
Turn noise reduction ON or OFF
N/A
Off
Aspect Ratio
Set aspect ratio to: [Full Screen or 16:9 or
Native]
N/A
Full Screen
Advanced
Navigate to the Advanced picture setting
menu. This option is for Computer/
Component input and only displays when
the I/O Module is connected.
N/A
N/A
Reset
Reset values in this menu only
N/A
N/A
* Note: Tint/Hue can only be adjusted for S-Video and RCA video input signals
24
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Advanced Picture Menu
The Picture Menu with the Advanced option selected, shown below, is used to adjust the projected image for
Computer and Component inputs only.
ENGLISH
3LFWXUH,QSXW6RXUFH&RPSXWHU
2YHU6FDQ
&RORU%ULJKWQHVV
+RUL]RQWDO3RVLWLRQ
9HUWLFDO3RVLWLRQ
)UHTXHQF\
3KDVH
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂz_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
5HVHW
X Feature
Description
Range
Default
Over Scan
Adjust cropping of image boundaries from 90th to
100th percentile (increments of 1 percent).
90–100
Video = 97
VGA = 100
Brightness / Color
Adjust the white peaking value of the DMD.
(0 = lowest white peaking value, 10 = highest value)
0–10
Computer = 10
Video = 3
Horizontal
Position
Adjust horizontal position of projected image.
(Only for Computer 1 or Computer 2 input source)
N/A
0
Vertical Position
Adjust vertical position of projected image.
(Only for Computer 1 or Computer 2 input source)
N/A
0
Frequency
Adjust the horizontal width of the projected image.
(Only for Computer 1 or Computer 2 input source)
-50–+50
0
Phase
Adjust clock phase to reduce image distortion.
(Only for Computer 1 or Computer 2 input source)
-15–+15
0
Reset
Reset values in this menu only
N/A
N/A
© 3M 2009. All Rights Reserved.
25
3M™ Super Close Projection System SCP716W
Operator’s Guide
Audio Menu
ENGLISH
(Menu displays only if I/O Module is connected)
The Audio Menu, shown below, is used to adjust the audio settings and select the audio input source to play
through the projector.
$XGLR,QSXW6RXUFH&RPSXWHU
Feature
Description
Volume
Mute
9ROXPH
0XWH
$XGLR,QSXW
5HVHW
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂÂ_
2IIX ¥6WHUHR0LQL
6WHUHR0LQL
5&$
X
Range
Default
Adjust volume level (0 = muted, 20 = full volume)
0–20
10
Turn mute mode ON and OFF
N/A
OFF
N/A
PC
N/A
N/A
Select the audio input source to process.
Audio Input
Reset
26
Stereo Mini 1 – VGA/Component
Stereo Mini 2 – VGA2/Component
RCA – S-Video/Component
Reset values in this menu only
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Setup Menu
The Setup Menu, shown below, is used to configure the basic projector operating parameters.
/DQJXDJH
$XWR6KXWRII0LQXWHV
.H\VWRQH
5HVHW/DPS+UV
/DPS0RGH
)DQ0RGH
3URMHFWLRQ0RGH
)DFWRU\5HVHW$OO
$GYDQFHG
5HVHW
Feature
Description
Language
Select the language for menu displays
ENGLISH
6HWXS,QSXW6RXUFH&RPSXWHU
(QJOLVK
X
2II_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂ_
_ÂÂÂÂÂÂÂÂÂÂÂzÂÂÂÂÂÂÂÂÂÂÂ_
X
1RUPDO
X
1RUPDO
X
)URQW3URMHFWLRQ X X
X
X
Range
Default
[1-English, 2-French, 3-Spanish, 4-German, 5-Italian,
6-Japanese, 7-Chinese Traditional, 8-Chinese Simplified,
9-Korean]
N/A
English
Auto Shutoff
Minutes
Set the number of idle minutes (no input source detected
and no commands issued) before the projector will
automatically shut off.
0–60
10
Keystone
Vertical keystone adjustment.
-15–+15
0
Reset Lamp Hours
Reset lamp hour status indicator. See Information Menu.
N/A
N/A
Lamp Mode
Bright, Normal, ECO
N/A
Normal
Fan Mode
Normal, High
N/A
Normal
Projection Mode
1-Front Projection, 2-Rear Projection, 3-Front Ceiling,
4-Rear Ceiling
N/A
Front
Projection
Factory Reset
Reset all menu items to FACTORY DEFAULT settings
N/A
N/A
Advanced
Select the Advanced Setup Menu.
N/A
N/A
Reset
Reset values in this menu only
N/A
N/A
© 3M 2009. All Rights Reserved.
27
3M™ Super Close Projection System SCP716W
Operator’s Guide
Advanced Setup Menu
ENGLISH
The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the
PIN code.
6HWXS 3,1,QSXW6RXUFH&RPSXWHU
3,1$XWKHQWLFDWLRQ
&KDQJH3,1
1HWZRUN&RQWURO
2II X
Â
X
2Q X
Feature
Description
Range
Default
PIN Authentication
Turn the PIN code security feature On or Off.
N/A
Off
0–9
3349
On/Off
On
Change the 4-digit PIN access code as desired.
Set PIN code
Note: When PIN security is enabled, the PIN access
code will automatically set to the default value 3349.
Turns the network control function on and off. The
network control feature allows a computer to open
the control web page on I/O module and control the
projector.
Network Control
28
To view the control web page, connect the I/O
module into the local area network and type the
I/O module's IP address into the address bar of a
web browser. (The IP address can be found in the
projector’s information menu. See the next page.)
The control web page will display. A RS-232 and
network control guide is available at www.mmm.
com\meetings in the Technical Documents section.
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Information Menu
The Information Menu, shown below, is used to display current projector configuration settings.
,QSXW5HVROXWLRQ
+)UHTXHQF\
9)UHTXHQF\
/DPS+RXUV
6\VWHP+RXUV
,3$GGUHVV
1HW0DVN
*DWHZD\
8VHU9HU
ENGLISH
,QIRUPDWLRQ,QSXW6RXUFH&RPSXWHU
[
.+]
+]
Feature
Description
Input Resolution
Displays the current input Resolution
H Frequency
Displays the current input H-Frequency
V Frequency
Displays the current input V-Frequency
Lamp Hours
Displays the current lamp operating hours for the installed lamp
System Hours
Displays the current total system time accumulated
IP Address *
(see note)
Displays the current IP Address for the I/O module Ethernet interface
Net Mask *
(see note)
Displays the current Net Mask for the I/O module Ethernet interface
Gateway *
(see note)
Displays the current gateway for the I/O module Ethernet interface
User Revision
Displays the current User Version
* Note: This field displays only when the I/O Module is connected.
© 3M 2009. All Rights Reserved.
29
3M™ Super Close Projection System SCP716W
Operator’s Guide
ENGLISH
Machine Specifications
Item
Specification
Acoustic Noise Level
Bright Mode: Typical 34 dB(A)
Normal Mode: Typical 32 dB(A)
ECO Mode: Typical 28.5 dB(A)
Auto Detect & Install
Automatically recognizes the connection of I/O module
Automatically saves user adjustments
Computer Compatibility
Horizontal Sync: 69 kHz
Vertical Sync: 85 Hz
Conditions for usage environment
Rel Humidity:10-80%
Altitude: 0-2286m (0-6000ft)
Temperature: /10-35C (50-95F)
Dimensions
328.94 x 264.0 x 116.43 mm (13.2 x 10.6 x 4.7 inches)
DMD Native Resolution
1280 x 800 (WXGA)
Focus
Manual Adjustment
Input / Output Terminals
HDMI connector
VGA (mini D-sub 15-pin) connector
Control connector
USB (A-B)
AC power outlet
Input rating
100-240V AC, 50-60 Hz, 4.0A
Lamp Life
3000 hrs at 230W Bright mode
5000 hrs at 180W ECO mode
Languages
English, French, Spanish, Deutsch, Italian, Japanese, Chinese
Traditional, Chinese Simplified, Korean
Lens
Focal Length = 6.95 mm
Power Consumption
300W normal operation, 5W standby mode
Video Compatibility
NTSC: M, N, 3.58Mz, 4.43 MHz
PAL: B, D, G, H, I, M, N
SECAM
Wall/Ceiling Mount capability
Three screw holes
Weight
4.5kg (10 lbs)
Note: Designs and specifications are subject to change without notice.
30
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
Lamp Replacement
ENGLISH
11 12 1
10
2
9
3
8
4
7
6
5
+J
ZZZODPSUHF\FOHRUJ
Note: Refer to the Setup Menu to reset the lamp hour timer after replacing the lamp.
© 3M 2009. All Rights Reserved.
31
3M™ Super Close Projection System SCP716W
Operator’s Guide
Troubleshooting
ENGLISH
Common Problems and Solutions
Symptom
No power.
No picture.
The lamp will not ignite or has
turned off.
Sound is heard with no picture.
Picture is displayed with no sound
Picture is dark or dim.
Desired input source cannot be
detected.
32
Cause
Solution
The power cord is disconnected.
Insert the power cord into AC
socket.
The projector has overheated and
automatically shut down.
Allow the projector cool down.
The desired input source is not
selected.
Press the remote control Input
button to select a desired input
source.
The cables from the input source
are not connected.
Connect the cable to correct input
source.
The input source is not turned on
or not displaying an image. (e.g. If
a notebook computer, the external
monitor port is not turned on).
Turn on input source.
The internal temperature is too
high.
Check exhaust for obstructions.
The lamp has reached maximum
life or has prematurely failed.
Replace lamp.
The VGA/Video cables are not
connected.
Connect the cables to the correct
input source.
The VGA/Video/Audio cables are
connected to the wrong input.
Change Input Menu to correct
video input setting.
The audio cables are connected to
the wrong input.
Connect the cables to the correct
input source.
Check the audio/video
configuration.
Set proper configuration through
the menu.
The volume is set to Minimum.
Turn up Volume.
The Mute is on.
Turn off Mute.
The brightness setting is too low.
Adjust the brightness
The lamp needs to be replaced.
Replace lamp.
The input source is not active. A
signal must be present for the input
to be selected.
Connect an active input source to
unit.
The input device (e.g. computer,
DVD player, etc.) is not turned on.
Turn on input source.
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Symptom
Operator’s Guide
Cause
Solution
The remote control is not facing the Face the remote control toward the
remote control sensor.
remote control sensor.
Operate the remote control within 5
meters.
An obstruction is between the
remote control and the sensor.
Remove obstacle.
The remote control’s batteries are
exhausted or inserted wrong.
Correctly insert batteries.
Projector Indicator Lights
Mode
Indicator Signal on Projector
Stand by
Orange LED (always ON)
Lamp Strike
Orange LED (Flashing)
Normal Operations
Green LED (always ON)
Fan Error
Red LED (One flash every second)
(
•
•
Thermal Error
Red LED (Two flashes every second) (
••
••
DDP2230 Error
Red LED (Four flashes every second) (
••••
Cooling (Lock Out)
Red LED (Solid light)
•
)
••
••••
)
••••
)
I/O Module Indicator Lights
Mode
Indicator Signals on I/O Model Box
Stand by
Orange LED (always ON)
Normal Operations
Green LED (always ON)
Cooling (Lock Out)
Red LED (Solid light)
© 3M 2009. All Rights Reserved.
33
ENGLISH
The remote control does not work.
The remote control is too far from
the sensor.
Operator’s Guide
3M™ Super Close Projection System SCP716W
Replacement Parts and Accessories
ENGLISH
Replacement Parts
Name of Part
3M Part Number
VGA Cable, 1.8 m
78-8134-7029-7
Remote Control
78-8134-7200-4
USB Cable, 1.8 m
78-8134-6861-4
SCP716/SCP716W Lamp Replacement
78-6969-9996-6
Optional Accessories (not shown)
Name of Part
3M Part Number
3M Fixed Wall Mount SCPFXW.V2
78-6969-9986-7
3M Folding Wall Mount with Speakers SCPWMS.V2
78-6969-9988-3
3M I/O Module V3
78-6972-0012-5
RS232 Adapter for projector control without the I/O Module
78-6969-9934-7
3M Security Kit
78-6969-9961-0
Wall Mount Bracket for Block and Stud Walls
78-6969-9962-8
VGA Cable, 3.5 m (11.5 ft)
78-8134-7218-6
USB Cable, 3.5 m (11.5 ft)
78-8134-7219-4
Control Cable 15 pin DB, 3.5 m (11.5 ft)
78-8134-7220-2
34
© 3M 2009. All Rights Reserved.
3M™ Super Close Projection System SCP716W
Operator’s Guide
ENGLISH
© 3M 2009. All Rights Reserved.
35
ENGLISH
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this
product, you must evaluate it and determine if it is suitable for your intended application. You assume all
risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall
have no force or effect unless expressly set forth in a written agreement signed by an authorized officer
of 3M.
Technical Support Contact:
3M Austin Center
Building A145-5N-01
6801 River Place Blvd.
Austin, TX 78726-9000
3M Canada
P.O. box 5757
London, Ontario
N6A 4TI
3M Mexico, S.a. de C.V.
Apartado Postal 14-139
Mexico, D.F. 07000
Mexico
3M Europe
Boulevard de l'Oise
95006 Cerge Pontoise Cedex
France
Please recycle.
Litho in USA
@3M 2009
78-6971-1489-6-A