Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG(726-7864)
www.samsung.com
U.S.A
1-800-SAMSUNG(726-7864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
Serial No.
BN68-03317A
BN68-03317A-00
[LD450-ZA]BN68-03317A.indb 1
2011-01-10 �� 12:37:13
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
✎✎ See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on
nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as
burned-in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
ubject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
S
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
he above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original
T
Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and
from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product.
xcluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,
E
exchanges or replacements, accessories, options, upgrades, or consumables.
or the location of a SAMSUNG Authorized Service Center, please call toll-free:
F
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image
quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout
process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
2
English
[LD450-ZA]BN68-03317A.indb 2
2011-01-10 �� 12:37:14
Contents
Getting Started
Advanced Features
yy
yy
yy
yy
yy
yy
yy
yy Media Play............................................................... 22
List of Features.......................................................... 4
Accessories............................................................... 4
Installing the LCD TV Stand....................................... 4
Viewing the Control Panel.......................................... 5
Viewing the Remote Control....................................... 6
Connecting to an Antenna......................................... 7
Plug & Play (Initial Setup)............................................ 7
Connections
yy
yy
yy
yy
Connecting to an AV Device....................................... 8
Connecting to an Audio Device.................................. 9
Connecting to a PC................................................... 9
Changing the Input source....................................... 11
Connecting a USB Device
22
yy Anynet+ .................................................................. 26
Setting Up Anynet+ Switching between Anynet+ Devices Recording Listening through a Receiver Troubleshooting for Anynet+
27
27
27
28
28
Other Information
yy
yy
yy
yy
Installing the Wall Mount.......................................... 29
Securing the TV to the Wall...................................... 30
Anti-Theft Kensington Lock...................................... 30
Troubleshooting....................................................... 31
Storage and Maintenance
Basic Features
yy How to Navigate Menus........................................... 12
yy Channel Menu......................................................... 12
Seeing Channels
Using Favorite Channels
Memorizing channels
Editing channels
Other Features
12
13
13
13
13
33
yy Specifications.......................................................... 34
License
34
yy Dimensions.............................................................. 35
yy Index....................................................................... 36
yy Picture Menu........................................................... 14
14
14
15
15
ENGLISH
Changing the Preset Picture Mode
Adjusting picture settings
Setting up the TV with your PC
Changing the Picture Options
yy Sound Menu............................................................ 17
Changing the Preset Sound Mode
Adjusting sound settings
Sound Settings
17
17
17
yy Setup Menu............................................................. 18
Setting the Time
Using the Sleep Timer
Setting the On/Off Timer
Locking Programs
Other Features
18
18
18
19
20
yy Support Menu.......................................................... 21
Check the Symbol!
t
This function can be used by pressing the
TOOLS button on the remote control.
✎
O
Note :
Important information
Step by step guide :
Informs you how to access
the menu.
English
[LD450-ZA]BN68-03317A.indb 3
3
2011-01-10 �� 12:37:14
Getting Started
List of Features
■■ Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
■■ Media Play: Allows you to play music files, and pictures saved on a USB device. (P. 22)
■■ Self Diagnosis: You can check picture and sound operation. (P. 21)
Accessories
✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎✎The items' colors and shapes may vary depending on the models.
■■ Remote Control (BN59-00997A) & Batteries (AAA x 2)
■■ Cleaning Cloth (BN63-01798B)
■■ Warranty Card / Safety Guide / Quick Setup Guide
■■ Power Cord
■■ Owner’s Instructions
Input Cables (Sold Separately)
To purchase RS232 cable, contact www.SamsungParts.com.
RS232 (AA39-00311A)
HDMI
Audio
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
VGA
Installing the LCD TV Stand
Components
When installing the stand, use the provided components and parts.
A
B
3EA (M4 X L16)
1 EA
yy Stand
yy Screws
1
A
4
English
[LD450-ZA]BN68-03317A.indb 4
2011-01-10 �� 12:37:18
01 Getting Started
2
B 3EA
✎✎Make sure to distinguish between the front and back of each component when assembling them.
✎✎Make sure that at least two people lift and move the TV.
✎✎Stand the product up and fasten the screws. If you fasten the screws with the TV placed down, it may lean to one side.
Viewing the Control Panel
✎✎The product color and shape may vary depending on the model.
Control Panel
Speakers
P (Power)
Press to turn the TV on and off.
Remote control sensor
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu of your TV’s features.
Adjusts the volume. In the on-screen menu, use the y buttons as you would
use the ◄ and ► buttons on the remote control.
SOURCEE
MENU
y
z
Power Indicator
Changes the channels. In the on-screen menu, use the z buttons as you
would use the ▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
[LD450-ZA]BN68-03317A.indb 5
5
2011-01-10 �� 12:37:19
Getting Started
Viewing the Remote Control
Turns the TV on and off.
Display and select the available video
sources. (P. 11)
Press to directly access to channels.
Return to the previous channel.
Press to select additional channels
(digital) being broadcast by the same
station. For example, to select channel
‘54-3’, press ‘54’, then press ‘-’ and ‘3’.
Cut off the sound temporarily.
Change channels.
Adjusts the volume.
Displays the main on-screen menu.
Displays the channel list on the screen. (P. 12)
View the Media Play. (P. 22)
SLEEP
MEDIA.P
Quickly select frequently used functions.
utomatically shuts off the TV at a preset
A
time. (P. 18)
Press to display information on the TV
screen. (P. 18)
Select on-screen menu items and
change menu values.
Exit the menu.
Return to the previous menu.
Buttons used in the Channel List,
Media Play menu, etc.
Installing batteries (Battery size: AAA)
A
MTS
B
C
P.SIZE
D
CC
MTS: P
ress to choose stereo, mono or
Separate Audio Program (SAP
broadcast). (P. 17)
P.SIZE: Choose the picture size. (P. 16)
CC: Controls the caption decoder. (P. 20)
✎✎NOTE
xx Use the remote control within 23 feet from TV.
xx Bright light may affect the performance of the remote control.
Avoid use when nearby fluorescent lights or neon signs.
xx The Color and shape may vary depending on the model.
6
English
[LD450-ZA]BN68-03317A.indb 6
2011-01-10 �� 12:37:20
01 Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Connecting the power cord and antenna.
VHF/UHF Antenna
Cable
or
PR
R-AUDIO-L
ANT OUT
PB
Y
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
1
2
Selecting a language
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
7
Viewing the HD
Connection Guide
Enjoy your TV.
POWER
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
yy Select the Home Use mode. Store Demo Mode is for retail
environments.
yy To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
P
✎✎In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.
The channel search will start automatically.
MEDIA.P
For more information, refer to Channel → Auto Program. (P. 13)
✎✎Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎✎If you select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
If You Want to Reset This Feature...
OO MENUm → Setup → Plug & Play → ENTERE
Setup
Plug & Play
Language
Time
Game Mode
: English
SLEEP
S.M
: Off
V-Chip
Caption
Melody
: Medium
English
[LD450-ZA]BN68-03317A.indb 7
7
2011-01-10 �� 12:37:21
Connections
Connecting to an AV Device
Using an HDMI cable or HDMI to DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
W
Y
W
R
W
R
BD/DVD player/
HD cable/sat box
G
B
Device
Red White
HDMI OUT
DVI OUT
PB
Y
AUDIO OUT
PR
W
R-AUDIO-L
R
PR
R-AUDIO-L
PB
Y
PR
R-AUDIO-L
PB
Y
✎✎HDMI/DVI IN / PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI
to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
xx The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
xx Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Y
W
R
W
R
R
✎✎When connecting to AV IN, the color of
G
B
the AV IN [Y/VIDEO] jack (Green) does not
match the color of the video cable (Yellow).
✎✎For better picture quality, the Component
connection is recommended over the A/V
connection.
W
R
W
R
Y
8
PB
PB
R
PR
PR
B
R-AUDIO-L
R-AUDIO-L
VCR
AUDIO OUT
G
VIDEO OUT
Blu-ray player
AUDIO OUT COMPONENT OUT
Y
R-AUDIO-L
R-AUDIO-L
PR
PR PB
PB Y
Y
W
Y
W
R
W
R
Yellow Red White Red
B
G
Blue Green
Y
English
[LD450-ZA]BN68-03317A.indb 8
2011-01-10 �� 12:37:24
02 Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
Digital Audio
System
OPTICAL
Headphones
R-AUDIO-L
PR
PB
Y
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
✎✎Headphones H
Headphones may be connected to the headphones output on your set. While the headphones are connected, the
sound from the built-in speakers will be disabled.
xx The available sound function can be restricted when connecting headphones to the TV.
xx The headphone volume and TV volume are adjusted separately.
Connecting to a PC
Using an HDMI cable or HDMI to DVI Cable / a D-sub Cable
✎✎Connecting through the HDMI cable may not be supported depending on the PC.
AUDIO OUT
R-AUDIO-L
R-AUDIO-L
PR
PB
Y R-AUDIO-L
R-AUDIO-L
AUDIO OUT
PC OUT
PR
PB
PR
PR
DVI OUT
Y
PB
PB
Y
Y
HDMI OUT
R-AUDIO-L
English
[LD450-ZA]BN68-03317A.indb 9
PR
PB
9
2011-01-10 �� 12:37:26
Y
Connections
<LN19D450>
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360x768@60Hz.
Mode
IBM
MAC
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
640 x 350
31.469
70.086
25.175
+/-
720 x 400
31.469
70.087
28.322
-/+
640 x 480
35.000
66.667
30.240
-/-
832 x 624
49.726
74.551
57.284
-/-
31.469
59.940
25.175
-/-
37.861
72.809
31.500
-/-
37.500
75.000
31.500
-/-
37.879
60.317
40.000
+/+
48.077
72.188
50.000
+/+
46.875
75.000
49.500
+/+
48.363
60.004
65.000
-/-
56.476
70.069
75.000
-/-
60.023
75.029
78.750
+/+
47.712
60.015
85.500
+/+
640 x 480
VESA DMT
800 x 600
1024 x 768
1360 x 768
<LN22D450>
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 x 1080@60Hz.
Mode
IBM
MAC
VESA DMT
VESA DMT / DTV CEA
10
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
Pixel Clock Frequency (MHz)
Sync Polarity (H / V)
640 x 350
31.469
70.086
25.175
+/-
720 x 400
31.469
70.087
28.322
-/+
640 x 480
35.000
66.667
30.240
-/-
832 x 624
49.726
74.551
57.284
-/-
1152 x 870
68.681
75.062
100.000
-/-
640 x 480
31.469
59.940
25.175
-/-
640 x 480
37.861
72.809
31.500
-/-
640 x 480
37.500
75.000
31.500
-/-
800 x 600
37.879
60.317
40.000
+/+
800 x 600
48.077
72.188
50.000
+/+
800 x 600
46.875
75.000
49.500
+/+
1024 x 768
48.363
60.004
65.000
-/-
1024 x 768
56.476
70.069
75.000
-/-
1024 x 768
60.023
75.029
78.750
+/+
1152 x 864
67.500
75.000
108.000
+/+
1280 x 1024
63.981
60.020
108.000
+/+
1280 x 1024
79.976
75.025
135.000
+/+
1280 x 800
49.702
59.810
83.500
-/+
1280 x 800
62.795
74.934
106.500
-/+
1280 x 960
60.000
60.000
108.000
+/+
1360 x 768
47.712
60.015
85.500
+/+
1440 x 900
55.935
59.887
106.500
-/+
1440 x 900
70.635
74.984
136.750
-/+
1680 x 1050
65.290
59.954
146.250
-/+
1920 x 1080p
67.500
60.000
148.500
+/+
English
[LD450-ZA]BN68-03317A.indb 10
2011-01-10 �� 12:37:26
Basic Features
✎✎NOTE
P
02 Connections
POWER
xx For HDMI/DVI cable connection, you must use the HDMI/DVI IN jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
EX-LINK
Connector for service only.
MEDIA.P
Edit Name
Changing the Input source
OO MENUm → Input → Edit Name → ENTERE
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC /
DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the
device connected to the input jacks to make your input
source selection easier.
■■ TV / AV / Component / PC / HDMI/DVI
✎✎When connecting a PC to the HDMI/DVI IN port with
OO MENUm → Input → Source List → ENTERE
✎✎ You can only choose external
HDMI cable, you should set the TV to PC mode under
Edit Name.
devices that are connected to the
TV. In the Source List, connected
inputs will be highlighted.
✎✎When connecting a PC to the HDMI/DVI IN port with
HDMI to DVI cable, you should set the TV to DVI PC
mode under Edit Name.
✎✎ PC always stay activated.
✎✎When connecting an AV devices to the HDMI/DVI IN
SLEEP
S.MODE
P.MODE
port with HDMI to DVI cable, you should set the TV to
DVI mode under Edit Name.
English
[LD450-ZA]BN68-03317A.indb 11
11
2011-01-10 �� 12:37:27
Basic Features
How to Navigate Menus
Channel Menu
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
1
MEDIA.P
SLEEP
¦¦ Seeing Channels
Channel List
OO MENUm → Channel → Channel List → ENTERE
POWER
2
4
3
P
1 MENU button: Displays the main on-screen menu.
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
Select a channel in the All Channels, Added
Channels, Favorite or Programmed
screen by pressing the ▲ / ▼ buttons, and
pressing the ENTERE button. Then you
can watch the selected channel.
Added Channels
2 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
MEDIA.P
The access step may differ depending on the selected menu.
1
MENU m
2
3
4
5
▲/▼
6
7
ENTER E
ENTER E
▲/▼
◄/►
EXIT e
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
SLEEP
Press ENTERE to confirm the
selection.
Press EXIT.
Air ■■
Air
♥ TV #6
7-1 ♥ TV #7
8
9
9-1
10
10-1
11-1
Air
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
B
Zoom
C
Select T Tools ► Next Program
All Channels: Shows all currently available
channels.
■■
■■
6
6-1 Added Channels: Shows all added channels.
*
■■
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
✎✎Using the color buttons with the Channel List
xx
A
A
xx
B
B Green
C
D (Zoom): Enlarges or shrinks a channel
number.
C Yellow
D
(Select): Selects multiple channel lists.
Select desiredS.MODE
channels and press the P.MODE
Yellow button
to set all the selected channels at the same time. The
c mark appears to the left of the selected channels.
xx T (Tools): Displays the Channel List option menu.
(The Options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons
c
*
)
(
12
Operations
A channel selected.
A channel set as a Favorite.
A reserved program.
A program currently being broadcast.
English
[LD450-ZA]BN68-03317A.indb 12
2011-01-10 �� 12:37:28
How to Stop Auto Programming
OO MENUm → Channel → Channel List → ENTERE
1. Press the ENTERE button.
* Add to Favorite / Delete from Favorite t
3. Press the ENTERE button.
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
¦¦ Editing channels
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
OO MENUm → Channel → Channel List → ENTERE
Added Channels
Air 6
6-1 Air
♥ TV #6
7-1 ♥ TV #7
8
9
9-1
10
10-1
11-1
Air
Air
♥ TV #9
Air
♥ TV #10
♥ TV #11
B
Zoom
C
2. A message will ask Stop Auto Program? Select Yes by
pressing the ◄ or ► button.
03 Basic Features
¦¦ Using Favorite Channels
Channel Name Edit t
1. Select a channel and press the TOOLS button.
Delete
Add to Favorite
Timer Viewing
Select All
Auto Program
Select T Tools ► Next Program
¦¦ Memorizing channels
OO MENUm → Channel → ENTERE
Antenna (Air / Cable) t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
2. Edit the channel name using the Channel Name Edit
menu.
■■ Channel Name Edit (analog channels only): Assign your
own channel name.
¦¦ Other Features
OO MENUm → Channel → ENTERE
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERE button to select Stop.
2. Press the ◄ button to select Yes.
3. Press the ENTERE button.
✎✎This function is only available in Cable mode.
■■ Air: Air antenna signal.
Channel List
■■ Cable: Cable antenna signal.
OO MENUm → Channel → Channel List → ENTERE
■■ Auto: Air and Cable antenna.
✎✎NOTE
xx When selecting the Cable TV system: Selects the
cable system. STD, HRC and IRC identify various
types of cable TV systems. Contact your local cable
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
Channel List Option Menu t
Set each channel using the Channel List menu options (Add/
Delete, Timer Viewing, Select All/ Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
xx After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
English
[LD450-ZA]BN68-03317A.indb 13
13
2011-01-10 �� 12:37:28
Basic Features
■■ Add / Delete: Delete or add a channel to display the
channels you want.
✎✎ NOTE
xx All deleted channels will be shown on the All
Channels menu.
xx A gray-colored channel indicates the channel
has been deleted.
xx The Add menu only appears for deleted
channels.
xx Delete a channel from the Added Channels or
Favorite menu in the same manner.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the set time; even when you
are watching another channel. Set the current time first
to use this function. (P. 18)
1. Press the ◄ / ► /▲ / ▼ buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
✎✎ If you selected Once, Every Week or Every Day
in Repeat, you can enter the date you want.
4. Press the ENTERE button when done.
✎✎ NOTE
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually.
yy Select Fine Tune in the Channel menu.
✎✎Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
✎✎To reset the fine-tuning, select Reset.
Picture Menu
¦¦ Changing the Preset Picture Mode
OO MENUm → Picture → Mode → ENTERE
Mode
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
■■ Standard: Suitable for a normal environment.
■■ Movie: Suitable for watching movies in a dark room.
xx Only memorized channels can be reserved.
xx Reserved programs will be displayed in the
¦¦ Adjusting picture settings
xx When a digital channel is selected, press the ►
OO MENUm → Picture → ENTERE
Programmed menu.
button to view the digital program.
■■ Select All: Select all the channels in the channel list.
■■ Deselect All: Deselect all the selected channels.
✎✎ You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved to
watch.
1. Press the ENTERE button to select Channel List.
2. Press the ◄ and ▼ button move to the Programmed
menu.
■■ Change Info: Change a show you have reserved to
watch.
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
xx When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R), the
OSD will be adjusted accordingly.
xx In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
xx Lowering picture brightness reduces power
consumption.
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
■■ Select All / Deselect All: You can select or deselect all
channels in the channel list.
14
English
[LD450-ZA]BN68-03317A.indb 14
2011-01-10 �� 12:37:28
¦¦ Changing the Picture Options
Set the input source to PC.
Auto Adjustment t
OO MENUm →Picture → Auto Adjustment →
ENTERE
Advanced Settings
OO MENUm → Picture → Advanced Settings →
ENTERE
Adjust frequency values/positions and fine tune the settings
automatically.
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎✎Not available when connecting through HDMI/DVI
✎✎In PC mode, you can only make changes to Gamma
cable.
Screen
and White Balance.
Advanced Settings
Black Tone : Off
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Dynamic Contrast
: Medium
Gamma
:0
Color Space
: Native
■■ PC Position: Adjust the PC’s screen positioning if it
does not fit the TV screen. Press the ▲ or ▼ button to
adjust the Vertical-Position. Press the ◄ or ► button to
adjust the Horizontal-Position.
Flesh Tone
:0
Edge Enhancement
: On
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1360x768
pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is ‘60’ or ‘60 Hz’.
Otherwise, just click ‘OK’ and exit the dialog box.
►
White Balance
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High):
Adjust the screen contrast.
■■ Gamma: Adjust the primary color intensity.
■■ Color Space (Auto / Native): Adjust the range of colors
available to create the image.
■■ White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
■■ Flesh Tone: Emphasize pink "flesh tone".
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
English
[LD450-ZA]BN68-03317A.indb 15
03 Basic Features
¦¦ Setting up the TV with your PC
15
2011-01-10 �� 12:37:28
Basic Features
xx After selecting Screen Fit in HDMI (1080i/1080p) or
Picture Options
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
OO MENUm → Picture → Picture Options →
ENTERE
✎✎In PC mode, you can only make changes to the Color
Tone and Size.
Picture Options
POWER
P
Color Tone
: Normal
Size
: 16:9
Digital Noise Filter
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
5. Press the ◄ or ► button to select Reset.
6. Press the ENTERE button.
xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
xx Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
U Move E Enter R Return
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
■■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎✎ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
SLEEP
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the ENTERE button.
►
■■ Color Tone (Cool / Normal / Warm1 / Warm2)
MEDIA.P
2. Press the ENTERE button.
✎✎NOTE
S.MODE
P.MODE
xx After selecting Zoom1, Zoom2 or Wide Fit:
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
■■ Digital Noise Filter (Off / Low / Medium / High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
✎✎ When the signal is weak, try other options until the
best picture is displayed.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
✎✎ Available in ATV, DTV(interlace), AV, COMPONENT
(480i / 1080i) and HDMI (480i / 1080i).
Picture Reset
(Reset Picture Mode / Cancel)
1. Press the ► button to select Position.
Resets your current picture mode to it's default settings.
2. Press the ENTERE button.
■■ Reset Picture Mode: Returns all picture values in the
currently selected mode to the default settings.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTERE button.
5. Press the ► button to select Reset.
6. Press the ENTERE button to reset the picture
to its default position.
16
English
[LD450-ZA]BN68-03317A.indb 16
2011-01-10 �� 12:37:29
POWER
P
MEDIA.P
¦¦ Changing the Preset Sound Mode
OO MENUm → Sound → Mode → ENTERE
Mode
■■ Standard: Selects the normal sound mode.
■■ Music: Emphasizes music over voices.
■■ Movie: Provides the best sound for movies.
■■ Clear Voice: Emphasizes voices over other sounds.
■■ Custom: Recalls your customized sound settings.
¦¦ Adjusting sound settings
OO MENUm → Sound → Equalizer → ENTERE
Equalizer
Adjusts the sound mode.
■■ Mode: Selects the sound mode among the predefined
settings.
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many
audio tracks (for MEDIA.P
example, simultaneous
translations of the program into foreign
languages).
✎✎You can only select a language among the ones being
03 Basic Features
Sound Menu
broadcasted.
Multi-TrackSLEEP
Sound (MTS)
S.MODE
(analog channels only)
■■ Mono: Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
■■ Stereo: Choose for channels that are
broadcasting in stereo.
■■ SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
✎✎Depending on the particular program being broadcast,
SLEEP
you can listen
to Mono, Stereo or SAP.
S.MODE
Auto Volume (Off / On)
Because each broadcasting station has its own signal
conditions, the volume may fluctuate each time channel
is changed. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
output when the modulation signal is low.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Settings
Speaker Select
(External Speaker / TV Speaker)
OO MENUm → Sound → ENTERE
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
SRS TruSurround HD (Off / On)
✎✎When Speaker Select is set to External Speaker, the
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker, you
should use these settings.
xx TV speaker: Off, External speaker: On
✎✎When Speaker Select is set to TV Speaker, you
should use these settings.
xx TV speaker: On, External speaker: On
✎✎If there is no video signal, both speakers will be mute.
English
[LD450-ZA]BN68-03317A.indb 17
P.MODE
17
2011-01-10 �� 12:37:29
P.MODE
Basic Features
Sound Reset (Reset All / Reset Sound
Mode / Cancel)
■■ Reset All: Resets all sound settings to the factory
defaults.
■■ Reset Sound Mode: Returns all sound values in the
currently selected mode to the default settings
Setup Menu
¦¦ Using the Sleep Timer
OO MENUm → Setup → Time → Sleep Timer →
ENTERE
■■ Sleep Timer t : Automatically
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
SLEEP
✎✎ To cancel the Sleep Timer, select
Off.
¦¦ Setting the Time
OO MENUm → Setup → Time → ENTERE
¦¦ Setting the On/Off Timer
OO MENUm → Setup → Time → Timer 1 →
ENTERE
Time
✎✎The current time will appear every time you press the
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
INFO button.
■■ Clock: Setting the clock is for using various timer
features of the TV.
✎✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
–– Auto: Set the current time automatically using the
time from the digital channel.
✎✎ The antenna must be connected in order to set
the time automatically.
–– Manual: Set the current time manually.
✎✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
✎✎ Available only when Clock Mode is set to
Manual.
✎✎ You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
DST (Daylight Saving Time) (Off / On / Auto):
Switches the Daylight Saving Time function on or off.
✎✎ This function is only available when the Clock
Mode is set to Auto.
Time Zone: Select your time zone.
✎✎ This function is only available when the Clock
Mode is set to Auto.
Timer 1
On Time
▲
12
▼
Off Time
12
Volume
10
Repeat
Once
00
am
Inactivate
00
Contents
am
Inactivate
Sun
Mon
TV Air 3
Tue Wed Thu
Fri
Sat
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
Contents: When the On Time is activated, you can turn
on a specific channel or play back contents such as
photo or audio files.
–– TV/USB: Select TV or USB. (Make sure that an USB
device is connected to your TV.)
–– Antenna: Select Air or Cable.
–– Channel: Select the desired channel.
–– Music: Select the folder containing MP3 files on the
USB device.
–– Photo: Select the folder containing JPEG files on the
USB device.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
✎✎ The c mark indicates the day is selected.
✎✎Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
18
English
[LD450-ZA]BN68-03317A.indb 18
2011-01-10 �� 12:37:29
OO MENUm → Setup → V-Chip → ENTERE
V-Chip
The V-Chip feature automatically locks out programs that are
deemed inappropriate for children. The user must enter a
PIN (personal identification number) before any of the V-Chip
restrictions are set up or changed.
✎✎NOTE
xx V-Chip is not available in HDMI, Component or PC
mode.
xx The default PIN number of a new TV set is “0-0-0-0”.
xx Allow all: Press to unlock all TV ratings.
xx Block all: Press to lock all TV ratings.
■■ V-Chip Lock (Off / On): You can block rated TV
Programs.
■■ TV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to
control what your children are watching.
TV-Y: Young children / TV-Y7: Children 7 and over /
TV-G: General audience / TV-PG: Parental guidance /
TV-14: Viewers 14 and over / TV-MA: Mature audience
ALL: Lock all TV ratings. / FV: Fantasy violence /
V: Violence / S: Sexual situation / L: Adult Language /
D: Sexually Suggestive Dialog
✎✎ The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-Y category,
then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then
all the categories in the young adult group will
be blocked (TV-G, TV-PG, TV-14 and TV-MA).
The sub-ratings (D, L, S, V) work similarly. So,
if you block the L sub-rating in TV-PG, then
the L sub-ratings in TV-14 and TV-MA will
automatically be blocked.
■■ MPAA Rating: You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should be
accompanied by an adult. / NC-17: No children under
age 17. / X: Adults only. / NR: Not rated.
✎✎ The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the PG-13 category,
then R, NC-17 and X will automatically be
blocked.
■■ Canadian English: You can block TV programs
depending on their Anglophone Canadian.
C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable for
children 8 years and over to watch on their own. /
G: General programming, suitable for all audiences. /
PG: Parental Guidance. / 14+: Programming contains
themes or content which may not be suitable for viewers
under the age of 14. / 18+: Adult programming.
✎✎ The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
■■ Canadian French: You can block TV programs
depending on their French Canadian rating.
G: General / 8 ans+: Programming generally considered
acceptable for children 8 years and over to watch on
their own. / 13 ans+: Programming may not be suitable
for children under the age of 13. /
16 ans+: Programming is not suitable for children under
the age of 16. / 18 ans+: Programming restricted to
adults.
✎✎ The V-Chip will automatically block any category
that deals with more sensitive material. For
example, if you block the 8 ans+ category, then
13 ans+, 16 ans+ and 18 ans+ will automatically
be blocked also.
■■ Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
✎✎ NOTE
xx If information is not downloaded from the
broadcasting station, the Downloadable U.S.
Rating menu is deactivated.
xx Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
xx The Downloadable U.S. Rating menu
is available for use after information is
downloaded from the broadcasting station.
However, depending on the information from
the broadcasting station, it may not be available
for use.
xx Parental restriction levels differ depending on
the broadcasting station. The default menu
name and Downloadable U.S. Rating change
depending on the downloaded information.
xx Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
xx The rating will automatically block certain
categories that deal with more sensitive
material.
xx The rating titles (For example: Humor Level..etc)
and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting
station.
English
[LD450-ZA]BN68-03317A.indb 19
03 Basic Features
¦¦ Locking Programs
19
2011-01-10 �� 12:37:30
P
Basic Features
■■ Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
How to watch a restricted channel
If the TV is tuned to a restricted channel, the V-Chip
will block it. The screen will go blank and the following
message will appear: This channel is blocked by
V-Chip. Please enter the PIN to unblock.
✎✎ If you forget the PIN, press the remote-control
buttons in the following sequence, which resets
the pin to “0-0-0-0” : POWER (off) → MUTE →
8 → 2 → 4 → POWER (on)
¦¦ Other Features
OO MENUm → Setup → ENTERE
Language
Set the menu language.
1. Select Language and press the ENTERE button.
2. Choose desired language and press the ENTERE
button.
✎✎ Choose between English, Español and Français.
Game Mode (Off / On)
When connecting to a game console such as PlayStation™
or Xbox™, you can enjoy a more realistic gaming experience
by selecting the game menu.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
Caption
(On-Screen Text Messages)
■■ Caption (Off / On): You can switch the
MEDIA.P
caption function
on or off. If captions are
not available, they will not be displayed
on the screen.
✎✎ The Caption feature does not
work in Component, HDMI or PC
modes.
■■ Caption Mode: You can select the desired caption
mode.
✎✎ The availability of captions depends on the
program being broadcasted.
Default / CC1~CC4 / Text1~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 /
Text1~Text4: (digital channels only) The Digital Captions
SLEEP
S.MODE
function works with digital channels.
✎✎ Service1~6 may not be available in digital caption
mode depending on the broadcast.
■■ Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and
Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7.
The default is Style 0.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the color of the letter. The default is
White.
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Foreground Opacity: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font
Style, Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
xx If Game Mode is On:
–– Picture mode is set to Standard and Sound mode
is set to Movie.
–– Equalizer is not available.
20
English
[LD450-ZA]BN68-03317A.indb 20
2011-01-10 �� 12:37:30
P.MOD
xx Digital Caption Options are available only
when Default and Service1 ~ Service6 can be
selected in Caption Mode.
xx The availability of captions depends on the
program being broadcasted.
xx The Default setting follow the standards set by
the broadcaster.
xx The Foreground and Background cannot be set
to have the same color.
xx You cannot set both the Foreground Opacity
and the Background Opacity to Transparent.
Melody (Off / Low / Medium / High)
Set so that a melody plays when the TV is turned on or off.
✎✎NOTE
xx Only available when the Input source is set to TV.
To turn the melody off, set Melody to Off.
xx The Melody does not play.
–– When no sound is output from the TV because the
MUTE button has been pressed.
–– When no sound is output from the TV because the
volume has been reduced to minimum with the
VOL – button.
–– When the TV is turned off by Sleep Timer function.
Energy Saving
(Off / Low / Medium / High / Auto)
Adjust the brightness of the TV in order to reduce power
consumption. When watching TV at night, set the Energy
Saving to High to reduce eye fatigue as well as power
consumption.
Support Menu
OO MENUm → Support → ENTERE
Self Diagnosis
■■ Picture Test: Use to check for picture problems. If the
problem continues to occur, check the Color pattern.
■■ Sound Test: Use the built-in melody sound to check for
sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
03 Basic Features
✎✎ NOTE
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Signal Strength: (digital channels only) An HD channel’s
reception quality is either perfect or the channels are
unavailable. Adjust your antenna to increase signal
strength.
Software Upgrade
Software Upgrade can be
performed by downloading
the latest firmware from
samsung.com to a USB
memory device.
Current Version - the
software already installed
in the TV.
TV Rear Panel
USB Drive
✎✎Software is represented as ‘Year/Month/Day_Version’.
HD Connection Guide
Refer to this information when connecting external devices
to the TV.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
English
[LD450-ZA]BN68-03317A.indb 21
21
2011-01-10 �� 12:37:30
P
Advanced Features
Media Play
MEDIA.P
Enjoy photos and/or music files saved on a USB
Mass Storage Class (MSC) device.
USB
Device Name
SUM
315.0MB/495.0MB Free
OO MENUm → Application → Media Play
(USB) → ENTERE
E Enter
e Exit
¦¦ Connecting a USB Device
USB
1. Turn on your TV.
TV Rear Panel
2. Connect a USB device containing photo and/or music files to the USB jack on the
rear of the TV.
Photo
3. When the Application selection screen is displayed, press the ► button to select
Media Play (USB), then press the ENTERE button.
Using the Media Play Menu
SUM
307.2MB/973.7MB
USB Drive
Photo
Music
Setup
P
Viewing a Photo (or Slide Show)
1. Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
Photo
2. Press the ▲or ▼button to select Media Play (USB), then press the
ENTERE button.
3. Press the ▲or ▼ button to select the corresponding USB Memory
Device, then press the ENTERE button.
✎✎ The Media Play menu differs depending on the USB Memory
Device connected to TV.
✎✎ Some devices may not be supported due to compatibility
SUM
307.2MB/973.7MB
Photo
580 * 440
78.0KB
✎✎It might not work properly with unlicensed multimedia files.
✎✎Need-to-Know List before using Media Play (USB)
Photo
Music
03 / 14
problems.
4. Press the ◄ or ► button to select an icon (Photo, Music, Setup),
then press the ENTERE button.
DSC_0558.JPG
File.....jpg
L Move
Setup
File.....jpg
E Enter
File.....jpg
R Return
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
SUM
307.2MB/973.7MB
Photo
DSC_0558.JPG
xx Only alphanumeric characters must be used as a folder name or file name (photo, music).
xx The file system only supports FAT16/32 (The NTFS file system is not supported) Certain types of USB Digital camera
580 * 440
78.0KB
File.....jpg
03 / 14
File.....jpg
File.....jpg
and audio devices may not be compatible with this TV.
is a Mass Storage Class Bulk-Only
xx Media Play only supports USB Mass Storage Class (MSC) devices. MSC
Music
File.....jpg
File.....jpg
06-I Will Carry You.mp3
File.....jpg
File.....jpg
File.....jpg
00:00:00
Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected
directly to the TV’s USB port. USB (HDD) is not supported.
4.3MB
SUM
307.2MB/973.7MB
2 / 31
File.....jpg
01-TheFile.....jpg
Way.mp3
File.....jpg
File.....jpg
File.....jpg
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
xx Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
04-Interference-gold.mp3
SAMSUNG is not responsible for any data file damage or data loss.
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
00:03:25
xx Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
SUM
Compatibility problem.
307.2MB/973.7MB
xx Only MP3 and JPEG file formats are supported.
xx The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48
kHz).
xx We recommend the sequential jpeg format.
xx Do not disconnect the USB device while it is loading.
22
English
Music
2 / 31
00:00:00
01-The Way.mp3
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
04-Interference-gold.mp3
Setup
SUM
307.2MB/973.7MB
[LD450-ZA]BN68-03317A.indb 22
06-I Will Carry You.mp3
4.3MB
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
00:03:25
2011-01-10 �� 12:37:31
P
USB
start of the file.
xx The higher the resolution of the image, the longer it takes to display on the screen.
xx The Photo or Music List displays up to 300 folders or files.
xx Loading may take some time depending on the size of the file.
xx MP3 files with DRM that have been downloaded from a non-free site cannot be played.
xx Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of of the
03 Advanced
04
Basic Features
Features
xx MSC supports MP3 and JPEG files, and the PTP device supports JPEG files only.
xx MTP (Media Transfer Protocol) is not supported.
xx The playing duration of an mp3 file may be displayed as “00:00:00” if its playing time information is not found at the
content in an integrated and comprehensive way, including the protection of the rights and interests of the content
Photo
providers, the prevention of the illegal copying of contents, as well as managing billings
and settlements.
SUM
307.2MB/973.7MB
xx If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
xx If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
the Recycle Bin” function on the PC
xx If a file deleted from the PC is still found when Media Play is run, use the “EmptyPhoto
Music
Setup
to permanently delete the file.
Photo
Viewing a Photo (or Slide Show)
1. Press the INFO button to display the option View, Start Slide Show,
Delete, Delete All, Deselect All.
2. Press the ▲or ▼button to select Start Slide Show then press the
ENTERE button.
✎✎ During the slide show, files are displayed in order from the
1/1 Page
Photo
DSC_0558.JPG
580 * 440
78.0KB
Jan 7, 2010
03 / 14
Upper Fold...
currently shown file.
✎✎ MP3 files can be automatically played during the Slide Show
if the Default Background Music is set to On. To enable this
function, MP3 files and other photo files must be located in the
same folder on the USB Memory Device.
Folder
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
SUM
307.2MB/973.7MB Free
' Select
n Move
File.....jpg
j Option
EPlay
R Return
✎✎Press the INFO button during the slide show to set the following options Slide Show Speed, Background Music,
Background Music Setting, List. Press the ▲or ▼button to select the option, then press the ENTERE button.
–– After setting the option press the ENTERE button to make a change.
✎✎Press the INFO button during the photo view to set the following options Start Slide Show, Zoom, Rotate, List. Press
the ▲or ▼button to select the option, then press the ENTERE button.
–– After setting the option press the ENTERE button to make a change.
Music
06-I Will Carry You.mp3
00:00:00
4.3MB
2 / 31
01-The Way.mp3
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
04-Interference-gold.mp3
SUM
307.2MB/973.7MB
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
00:03:25
Setup
English
[LD450-ZA]BN68-03317A.indb 23
23
2011-01-10 �� 12:37:32
P
USB
Photo
Music
Setup
Advanced Features
Music
Photo
Using the MP3 List
DSC_0558.JPG
580 * 440
78.0KB
File.....jpg
File.....jpg
File.....jpg
Music
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
03 / 14
Folder icon
Music list icon
Photo
File.....jpg
SUM
307.2MB/973.7MB
File.....jpg
SUM
307.2MB/973.7MB
SUM
307.2MB/973.7MB
File.....jpg
Move to the previous folder stage icon
✎✎The selected file is displayed on the top with its playing time.
Photo
Music
Setup
Photo
1. To select all files or a file, press the INFO button to display the Music
menus.
Press the ENTERE button to select Play / Play Selected File,
Repeat Music, Delete Selected File / Delete, Delete All or
Deselect All.
2. Press the ▲or ▼button to move to an icon, then press the
ENTERE button.
Photo
Pressing the ENTERE
button over a musical note icon immediately
plays the music *file.
Pressing the ENTERE button over a folder icon shows the music
files included in the folder.
DSC_0558.JPG
580 440
78.0KB
File.....jpg
03 / 14
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
File.....jpg
Music
L Move
Setup
E Enter
R Return
1/4 Page
06-I Will Carry You.mp3
Music
00:00:00
Upper Folder
4.3MB
Jan 7, 2010
2 / 31
Folder
Play
01-The Way.mp3
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
r
Repeat Music
Delete
Delete
All
SUM
307.2MB/973.7MB
Deselect
All
: Off
04-Interference-gold.mp3
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
ExitMove
' Select jn
j Option
00:03:25
E Play
R Return
SUM
■■ Play: Select to play MP3 files.
307.2MB/973.7MB
File.....jpg
✎✎ This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if
they are saved on the same USB device.
✎✎ To adjust the music volume, press the y button on the remote control. To mute the sound, press the
MMUTE button on the remote control.
Setup
■■ Repeat Music (On / Off): Select to repeatedly play MP3 files in the current folder.
Playing Music
Music
06-I Will Carry You.mp3
00:00:00
yy Only displays files with the MP3 file extension. Other file extensions are not displayed, even if they are saved on the same
USB device.
yy If the sound is strange when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An
over-modulated MP3 file may cause a sound problem.)
yy Music function information icons
4.3MB
2 / 31
01-The Way.mp3
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
04-Interference-gold.mp3
SUM
307.2MB/973.7MB
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
00:03:25
Repeat Mode is On.
Repeat Mode is Off.
When pressing the PLAY/PAUSE button on the remote control while music is playing.
When pressing the STOP button on the remote control, the music stops.
Setup
24
English
[LD450-ZA]BN68-03317A.indb 24
2011-01-10 �� 12:37:33
Music
4.3MB
2 / 31
01-The Way.mp3
00:03:25
02-Run To Me.mp3
00:03:25
03-No More Sad Songs.mp3
00:03:25
04-Interference-gold.mp3
SUM
307.2MB/973.7MB
00:03:25
05-marketa_irglova-The_hill.mp3
00:03:25
06-I Will Carry You.mp3
00:03:25
07-marketa_irglova.mp3
00:03:25
08-Super World.mp3
00:03:25
03 Advanced
04
Basic Features
Features
Setup
Using the Setup Menu
■■ Slide Show Speed: Select to control the slide show speed. You can
select Fast, Normal or Slow.
■■ Background Music: Select to determine whether to play an MP3 file
during a slide show. You can select Music On or Music Off.
■■ Background Music Setting: While a slide show is in progress, use
the Background Music Setting to select a music file to listen to.
Select an MP3 file as the background music.
■■ Repeat Music: Select to determine whether to repeat playing the
music when all MP3 files in the current folder have been played.
Setup
Slide show Speed
: Fast
Background Music : On
Background Music Setting
Repeat Music
: On
Screen Saver
: 2 hours
Safe Remove
U Move
E Enter
R Return
■■ Screen Saver: Select to set the waiting time before the screen saver appears. The screensaver will appear when no
button is pressed for 2 hours, 4 hours, 8 hours, 10 hours or Off.
■■ Safe Remove: You can remove the device safely from the TV.
Playing the selected photos / music files
yy Press the Yellow button.
yy Repeat the above operation to select desired photos / music files.
✎✎ Selected photos or files are marked with the symbol c. To cancel a selection, press the Yellow button again.
yy Press the ENTERE button to play the selected photos or files.
English
[LD450-ZA]BN68-03317A.indb 25
25
2011-01-10 �� 12:37:34
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
TV
Anynet+
Device 2, 3
Anynet+
Device 1
Home Theater
HDMI
Cable
HDMI
Cable
Optical Cable
HDMI Cable
1. Connect the HDMI/DVI IN jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theater.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
xx Only one Home Theater can be connected.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
26
English
[LD450-ZA]BN68-03317A.indb 26
2011-01-10 �� 12:37:34
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
03 Advanced
04
Basic Features
Features
Anynet+ Menu
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
OO MENUm → Application → Anynet+ (HDMI-CEC) → ENTERE
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎✎ If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
✎✎ May not be enabled depending on the device.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English
[LD450-ZA]BN68-03317A.indb 27
27
2011-01-10 �� 12:37:35
Advanced Features
¦¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is
set to On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press > CH <, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel
button operates only when a tuner-embedded Anynet+ device is not connected.)
The message ‘Connecting to
Anynet+ device...’ appears on
the screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not
play.
• You cannot use the play function when Plug & Play (initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV Program cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
28
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theater) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play
(initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your
TV off and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support
Anynet+ functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a
power failure, please repeat the device scan.
English
[LD450-ZA]BN68-03317A.indb 28
2011-01-10 �� 12:37:35
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
05 Other Information
Installing the Wall Mount
✎✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xx Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
xx Always use two people to mount the TV to a wall.
Product Family
LCD-TV
inches
VESA Spec. (A * B)
Standard Screw
19~22
75 X 75
100 X 100
M4
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~65
600 X 400
70~80
800 X 400
80~
1400 X 800
M6
Quantity
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
English
[LD450-ZA]BN68-03317A.indb 29
29
2011-01-10 �� 12:37:35
Other Information
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
✎✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
✎✎ Screw Specifications
xx For a 17 ~ 29 Inches LCD TV: M4
2. Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎✎Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎✎Install the TV near to the wall so that it does not fall backwards.
✎✎It is safe to connect the string so that the clamps fixed on the wall
Wall
are equal to or lower than the clamps fixed on the TV. Untie the
string before moving the TV.
Anti-Theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such
as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end
of the Kensington lock cable.
1
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎These are general instructions. For exact instructions, see the User
manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the TV model.
30
<Optional>
English
[LD450-ZA]BN68-03317A.indb 30
2011-01-10 �� 12:37:36
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
apply, visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Issues
Solutions and Explanations
Poor picture
First of all, please perform the Picture Test and confirm that your TV is properly displaying the test
image.
• go to MENU - Support - Self Diagnosis - Picture Test (P. 21)
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
it did in the store.
05 Other Information
Troubleshooting
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or
Component cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Air/Cable Antenna connection: Try HD stations after performing Auto program.
✎✎
Many HD channels are upscaled from SD(Standard Definition) contents.
• Adjust the Cable/Sat box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially in fast moving pictures
such as sports and action movies.
• Low signal level can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (up to 3.3ft) may cause noise in picture on analog and
digital TV.
Color is wrong or missing.
• If you’re using Component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
• Adjust the Picture options in the TV menu.
(go to Picture mode / Color / Brightness / Sharpness) (P. 14)
• Adjust Energy Saving option in the TV menu.
(go to MENU - Setup - Energy Saving) (P. 21)
• Try resetting the picture to view the default picture setting.
(go to MENU - Picture - Picture Reset) (P. 16)
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes)
• Change cable/satellite box resolution.
• Set output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
• go to MENU - Support - Self Diagnosis - Sound Test (P. 21)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too
low at maximum volume.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no
sound.
• Set the Speaker Select option to TV speaker in the Sound menu. (P. 17)
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. Low signal level may cause
sound distortion.
• Perform the Sound Test as explained above.
English
[LD450-ZA]BN68-03317A.indb 31
31
2011-01-10 �� 12:37:37
Other Information
Solutions and Explanations
Issues
No Picture, No Video
The TV will not turn on.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Setup menu. (P. 18)
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15
minutes if there is no signal.
There is no picture/video.
• Check cable connections. (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote
control.
• Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV
signal type is set in the menu. There are 3 options. (STD, HRC and IRC) (P. 13)
• Verify the Antenna is positioned correctly.
No Caption on digital channels.
• Check Caption Setup menu. Try changing Caption Mode Service 1 to CC1. (P. 20)
• Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion. Especially on fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV problem.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution so it matches the resolutions supported by the TV.
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is
connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Others
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers
with Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this
indicates that the set-top-box has a grounding issue. Replace the Component video cables
with an HDMI connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying upscaled SD
(4:3) contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from
your TV.
• Adjust picture size option on your external device or TV to full screen.
The remote control does not work.
• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
32
English
[LD450-ZA]BN68-03317A.indb 32
2011-01-10 �� 12:37:37
Solutions and Explanations
Others
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Sat remote control to operate the TV. Refer to the Cable/Sat user manual
for SAMSUNG TV code.
‘Mode Not Supported’ message.
• Check the supported resolution of the TV and adjust the external device’s output resolution
accordingly. Refer to resolution settings in this manual.
Caption on TV menu is greyed out.
• Caption can not be selected in the TV menu when connected via HDMI or Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
• This function is only available with digital channels with an Antenna (RF/Coax) connection (Air
or Cable). (P. 21)
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble.
Channel menu is grey out (unavailable).
• Channel menu is only available when the TV source is selected (Antenna or Cable).
Your settings are lost after 30 minutes
or every time the TV is turned off.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.
Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play →
ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
You see small particles when you look
closely at the edge of the frame of the
TV.
• This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode.
For details, refer to Plug & Play (Initial Setup). (P. 7)
05 Other Information
Issues
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the
cables are flexible enough for long term use. Mounting the TV to the wall, we recommend using
cables with 90 degree connectors.
✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
¦¦ Storage and Maintenance
Do not spray water or a cleaning agent directly onto the
product. Any liquid that goes into the product may cause a
failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small
amount of water.
English
[LD450-ZA]BN68-03317A.indb 33
33
2011-01-10 �� 12:37:37
Other Information
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Model Name
LN19D450
LN22D450
Display Resolution
1360 x 768
1920 x 1080
19" Class
(18.5" measured diagonally)
22" Class
(21.5" measured diagonally)
3W X 2
3W X 2
18.8 X 2.5 X 12.4 inches
(476.5 X 63.3 X 315.7 (mm))
18.8 X 6.3 X 14.0 inches
(476.5 X 160.7 X 356.1 (mm))
21.4 X 2.4 X 13.9 inches
(543.4 X 61.9 X 353.5 (mm))
21.4 X 6.8 X 15.6 inches
(543.4 X 171.6 X 395.9 (mm))
8.7 Ibs (3.9 kg)
9.2 Ibs (4.1 kg)
10.9 Ibs (4.9 kg)
11.5 Ibs (5.2 kg)
Screen Size
(Diagonal)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
✎✎Design and specifications are subject to change without prior notice.
✎✎This device is a Class B digital apparatus.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
¦¦ License
TruSurround HD, SRS and
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology
is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Open source license notice
In the case of using open source software, Open Source Licenses are available on the product menu.
Open Source License Notice is written only English.
34
English
[LD450-ZA]BN68-03317A.indb 34
2011-01-10 �� 12:37:38
05 Other Information
Dimensions
■■ FRONT VIEW / SIDE VIEW
7
1
2
5
3
6
8
4
(Unit: inches)
Model name
1
2
3
4
5
6
7
8
LN19D450
18.8
16.2
9.1
12.0
12.4
14.0
2.5
6.3
LN22D450
21.4
18.9
10.6
13.9
13.9
15.6
2.4
6.7
■■ JACK PANEL DETAIL / REAR VIEW
5
1
6
4
2
3
(Unit: inches)
Model name
1
2
3
4
5
6
LN19D450
5.9
8.8
2.8
4.0
3.0
3.0
LN22D450
7.4
11.8
2.8
9.6
3.0
3.0
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2011 Samsung Electronics America, Inc
English
[LD450-ZA]BN68-03317A.indb 35
35
2011-01-10 �� 12:37:38
Other Information
Index
A
F
Antenna
Anynet+
Auto Adjustment
Auto Program
7
26
15
13
B
Balance
13
H
HD
HDMI
Home theater
16
8
9, 26
17
L
C
Cables
Caption
CC button
Clear Scrambled Channel
Clear Voice
Component
Composite
11
20
6, 20
13
17
8
4
D
Device List
DIGITAL AUDIO OUT
DST (Daylight Saving Time)
D-sub
Dynamic Contrast
27
9, 26
18
9
15
E
Energy Saving
Equalizer
External Speaker
36
Favorite Channel
R
21
17
17
Language
License
20
34
M
MagicAngle
Media Play
Melody
MP3 Play
MTS
MTS button
14
22
21
24
17
6, 17
O
Optimal resolution
6
16
S
Screen Fit
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
SRS TruSurround HD
Standby mode
16
18
23
21
11
17
17
5
T
Timer
18
V
Volume
5, 6, 18
W
10
P
Photo view
Position
Power Indicator
Remote Control
Reset Picture Mode
Wall Mount
White Balance
Wide Fit
29
15
16
23
15
5
English
[LD450-ZA]BN68-03317A.indb 36
2011-01-10 �� 12:37:38
Download PDF
Similar pages
Spirit Z8 User's Manual
Samsung LE-26A336 LCD TV
UN46ES6500 PID
LN40B530 PID
Output file
HWE550 PID
Output file
HWF355 PID
UN50ES6100 PID
A crystal, slim designed LCD TV that comes with