HP ProLiant BL460c Gen9 Server Blade

QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Overview
HP ProLiant BL460c Gen9 Server Blade
HP ProLiant BL460c Gen9 Server Blade – Internal View
1.
2.
3.
4.
5.
6.
FlexibleLOM adapter
Nand Flash & Micro SD
Mezzanine Slots (x16 PCI 3.0)
Sixteen (16) DDR4 DIMM slots (8 per processor)
Up to two (2) Intel® Xeon® E5-2600 v3 family processors
HP BLc 12W Smart Storage Battery connector
7.
8.
9.
10.
11.
12.
USB 3.0 and TPM
Embedded SATA Connector
Solid State Device Connector
Two hot-plug drive bays
HP Smart Array P244br Controller with 1GB FBWC
iLO Management Engine
What's New




Flexible Controller Options
Support for 2133MHz DDR4 memory
Support for 12Gb SAS internal hard drives and 12Gb SAS storage controller offerings
Support for the Intel E5-2600 v3 Product Family
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 1
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features
NOTE: This document covers the HP ProLiant BL460c Gen9 server blade only. For information on HP BladeSystems c-Class
Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c-Class Enclosures QuickSpecs:



HP BladeSystem c3000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04123379
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04229580
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual Connect are
required and available via the HP Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
E5-2600 v3 series Processors
One of the following HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W)
depending on Model
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W)
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W)
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W)
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W)
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W)
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W)
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W)
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W)
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W)
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W)
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W)
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W)
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W)
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W)
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W)
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W)
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W)
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W)
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W)
NOTE: All processors within the server must be identical.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 2
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3, the E5-2643 v3,
the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there are twelve (12) total
available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the
'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the E52603 v3 and E5-2609 v3.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology. The
frequency boost increment is dependent on the processor SKU and the number of active cores. In general, a
higher boost increment is obtained when fewer cores are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on
the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model number indicates the
Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: The letter "L" following the model number indicates denotes lower wattage.
Cache Memory
One of the following
depending on Model
45MB (1x45MB) L3 cache
NOTE: For Eighteen-core processors.
40MB (1x40MB) L3 cache
NOTE: For Sixteen-core processors.
35MB (1x35MB) L3 cache
NOTE: For Fourteen-core processors.
30MB (1x30MB) L3 cache
NOTE: For Twelve-core processors.
25MB (1x25MB) L3 cache
NOTE: For Ten-core processors.
20MB (1x20MB) L3 cache
NOTE: For Six or Eight-core processors.
15MB (1x15MB) L3 cache
NOTE: For Quad or Six-core processors.
10MB (1x10MB) L3 cache
NOTE: For Quad-core processors.
Chipset
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to two (2) processors
On System
HP iLO (Firmware HP iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and accessible via
Management Chipset iLO. Read and learn more in the iLO QuickSpecs.
NOTE: For more information, visit: http://www.hp.com/go/ilo
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 3
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features
Memory Protection
Advanced ECC
Memory Mirroring
Memory Online Spare Mode (Rank Spare Mode)
Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
Standard (Preconfigured Models)
128GB (4 x 32GB) DDR4 2133MHz RDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
Maximum (LRDIMM) 1TB (16 x 64GB) up to 2133MHz at 1.2V
Maximum (RDIMM) 512GB (16 x 32GB) up to 2133MHz at 1.2V
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this server. HP
SmartMemory is required to realize the memory performance improvements and enhanced functionality
listed in this document for Gen9. For additional information, please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory Configuration
Tool at: http://h22195.www2.hp.com/DDR4memoryconfig/Home/Legal
Network Controller
One of the following
depending on Model
One (1) 20Gb 2-port FlexFabric FLB, 10Gb 2-port HP FlexFabric FLB, or 10Gb 2-port Ethernet FLB
NOTE: Supports FCoE, , TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing the speed, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric or Flex10/10D module
module.
Fibre Channel over Ethernet (FCoE) is supported with HP interconnects. Learn more at:
http://www.hp.com/go/bladesystem/interconnects
One (1) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
One (1) HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps
Expansion Slots
Two (2) I/O expansion mezzanine slots:
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 4
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features


x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards,
one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one
port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
Mezzanine card options include:
 Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb Ethernet
server adapter mezzanine options for additional network ports.
 Dual-port 16Gb Fibre Channel HBA for SAN connectivity.
 QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.
 I/O accelerator mezzanine options for high transaction rate local storage
HP Server ROM
HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase
of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally,
these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in
diagnosis.
HP's ProLiant ROM is used to configure the following:
 Processor and chipset status registers
 System memory, memory map, and memory initialization
 System hardware configuration (integrated PCI devices and optional PCIe cards).
 Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu
HP Server UEFI
/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and
more secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform
defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy
BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
 Secure Boot
 Operating system specific functionality
 Support for > 2.2 TB (using GPT) boot drives
 USB 3.0 Stack
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 5
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features




Embedded UEFI Shell
Mass Configuration Deployment Tool using HP RESTful API
PXE boot support for IPv6 networks
Boot support for option cards that only support a UEFI option ROM
NOTE: For more information please visit http://www.hp.com/go/proliant/uefi
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
support UEFI.
NOTE: HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the
factory.
Storage Controller
All BTO Models
One (1) HP Smart Array P244br Controller with 1GB Flash-Backed Write Cache (FBWC)
supporting RAID 0 and RAID 1, or HP H244br Smart HBA.
NOTE: The HP Smart Array P244br, the HP H244br Smart HBA, and the HP B140i
(chipset SATA). Support two (2) small form factor (SFF) hot plug drive bays.
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug SFF SAS
4.0TB
2 x 2.0TB
Hot Plug SFF SATA
4.0TB
2 x 2.0TB
Hot Plug SFF SAS
3.2TB
2 x 1.6TB
SSD
Hot Plug SFF SATA
3.2TB
2 x 1.6TB
SSD
NOTE: The ProLiant BL460c Gen9 server includes the HP hot plug small form factor (SFF) SmartDrive carrier
for enhanced management and reduced maintenance errors. HP drives from previous generation servers
(prior to Gen8) are not compatible with the ProLiant BL460c Gen9 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 3.0 Port
One (1) internal USB 3.0 connector for USB flash media drive keys
NOTE: The above options are intended for integrated hypervisor virtualization environments.
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE A3
FIPS 140-2 Level-2 certification pending
Energy Star
NOTE: Energy Star Family level certification covering all BL460c Gen9 configurations that do not include the
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 6
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features
Intel Xeon E5-2699v3 processor. For more information, visit
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/energystarservers.html
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/servers/BL460cGen9
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
 The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c
Gen9 servers plugged vertically.
 The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c
Gen9 servers plugged horizontally.
Server blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules
are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200eh video controller
 1600 x 1200 (32 bpp)
 1920 x 1200 (16 bpp)
HP iLO Management On System Management Memory
 16 MB Flash Video Memory
 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HP ProLiant BL460c Gen9 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures.
Embedded
Management
HP Integrated
Lights Out
UEFI
HP RESTful API
Intelligent
Provisioning
Server Utilities
HP Smart Update
Monitor your servers for ongoing management, service alerting, reporting and remote
management with iLO. Learn more at http://www.hp.com/go/ilo
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
RESTful API is an application programming interface. RESTful Web Service API served
by iLO’s web server.
http://www.hp.com/go/restfulapi .
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
Optimize firmware and driver updates with HP Smart Update solutions. Learn more at
http://www.hp.com/go/smartupdate.
HP Systems Insight HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 7
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features
Manager (HP SIM)
Scripting Tool Kit
and Windows
PowerShell
Security
HP RESTful
Interface Tool
HP RESTful API tool is a scripting tool to provision servers using RESTful API Interface
to discover and deploy servers at scale. Learn more at
http://www.hp.com/go/restfulapi.
HP iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from anywhere
from select smartphones and mobile devices. For additional information please visit:
http://www.hp.com/go/ilo/mobileapp.
HP Insight Online
HP Insight Online, available at no additional cost as part of your HP warranty, Care
Pack or contractual support agreement with HP, is a personalized dashboard for
simplified tracking of IT operations and support information from anywhere, anytime.
Learn more at http://www.hp.com/go/insightonline/info.











Availability
Servers, and also provides you with basic support for non-HP servers. HP SIM also
integrates with HP SUM to provide quick and seemless firmware updates. Learn more
at http://www.hp.com/go/sim.
Provision 1 to many servers using your own scripts to discover and deploy them with
HP Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows
PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or
http://www.hp.com/go/powershell.
Power-on password
Administrator's password
Keyboard password (QuickLock)
HP iLO Management On System Management Chipset with:
o SSL encryption
o Secure Shell version 2
o Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
o AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
FIPS 140-2 Level-2 certification pending
Memory
 Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit
error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
 Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
 Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
 Failed DIMM isolation improves the service time thus improving the overall system availability.
 Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
 Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
 Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 8
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Standard Features

supporting multiple data paths routed to redundant interconnect modules.
Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Storage
 Two (2) Small Form Factor hot-plug SAS/SATA HDD or SSD drive bays.
 Choice of the HP Smart Array P244br Controller with 1GB FBWC/HP, Smart HBA H244br, or theHP
B140i (chipset SATA). RAID 0 and 1 support for all three storage controller offerings.,
 Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
 Processor internal sensors & thermal control protection against over-temperature conditions.
 Cache parity/ECC protects cache data from accidental data corruption.
 Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
 Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
 Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
 Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
common slot enclosure-based power supplies (configuration dependent).
 Up to ten (10) enclosure-based hot-plug HP Active Cool fans that scale to meet future demands,
optimize airflow, reduce power draw, and improve acoustic performance.
 Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
 HP Dynamic Power Saver Mode monitors the total enclosure power consumption in real time and
automatically adjusts with change in demand for improved efficiency and reliability.HP Dynamic
Power Capping safely limits power usage without impacting performance by capping peak usage
instead of average power usage, removes risk to electrical infrastructure with a fast-acting,
hardware-based capping algorithm, and reclaims more power by dynamically controlling power
limits based on workload demand.
 Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
 Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
 Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year
warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 9
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Optional Features
Fibre Channel
Support
Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HP ProLiant BL460c Gen9.
Compatible SAN
HP ProLiant BL460c Gen9 server blades are optimized for HP MSA, EVA, 3PAR and XP.
HP ProLiant BL460c Gen9 server blades are compatible with select 3rd party SANs. Please see blade storage
page for more details at
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Virtual Connect
HP Virtual Connect is an interconnect option for c-Class BladeSystem that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections (FCoE).
HP OneView’s software-defined approach to infrastructure management enables central console to
administer network connections and workloads for thousands of servers, see
http://www.hp.com/go/oneview
For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and management
options, see http://www.hp.com/go/virtualconnect.
Embedded
Management
iLO Advanced for
BladeSystem
Server Management HP Insight Control
HP iLO Advanced for BladeSystem licenses offer smart remote functionality without
compromise, for all HP ProLiant servers. The license includes the full integrated
remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration,
console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management
functionality. Learn more about HP iLO Advanced at
http://www.hp.com/go/iloadvanced
HP Insight Control, lets you deploy, migrate, monitor, remote control, and optimize
your IT infrastructure through a single, simple management console. For more
information, see http://www.hp.com/go/insightcontrol.
HP OneView
Powerful converged management of servers, storage, and network for IT service
automation and infrastructure simplicity, see http://www.hp.com/go/oneview .
HP Matric Operating The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is
Environment
an integrated command center that helps you instantly adjust to dynamic business
demands. This advanced infrastructure management software lets you reduce the cost
of common data center tasks by up to 40 percent while keeping pace with your
changing business. The HP Matrix OE includes the automated provisioning,
optimization, and recovery management capabilities for HP CloudSystem Matrix, the
ideal platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP Insight Cluster
HP Insight Cluster Management Utility is a Hyperscale management framework that
Management Utility includes software for the centralized provisioning, management and monitoring of
(CMU)
nodes and infrastructure. Learn more at http://www.hp.com/go/cmu.
High Performance
Clusters
HP Cluster
Platforms
HP Cluster Platforms are specifically engineered, factory-integrated large-scale
ProLiant clusters optimized for High Performance Computing, with a choice of servers,
networks and software. Operating system options include specially priced offerings for
Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 10
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Optional Features
HP HPC
Interconnects
Storage Software
Windows HPC Server. A Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available for this
server as part of the HP Cluster Platform portfolio. These high-speed InfiniBand and
Gigabit interconnects are fully supported by HP when integrated within an HP cluster.
Flexible, validated solutions can be defined with the help of configuration tools.
http://www8.hp.com/us/en/products/servers/scalable-systems/clusterplatform.html
Whether you need to solve a specific data protection, archiving, or storage command and control challenge,
or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HP storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets
and respond faster to business opportunities.
Storage software that gets the job done:
 Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
 Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed or
less valuable data to lower cost storage.
 Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the command
and control foundation you need to efficiently manage and visualize your physical and virtual
environments.
 Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
application development and reporting.
 Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
 HP StoreVirtual VSA
HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. This server model starting November 2013, includes a limited
license for HP StoreVirtual VSA software with 1TB of capacity. To download the license key and
StoreVirtual VSA software, visit: http://www.hp.com/go/unlockVSA.
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more information
and access to the 60-day free trial, visit: http://www.hp.com/go/tryVSA
NOTE: For more information available Storage Software including QuickSpecs, please see:
http://www.hp.com/go/storage/software.
HP Insight Online
HP Insight Online is part of the HP Support Center for one stop, secure access to product and HP support
information personalized to your IT environment. Insight Online can automatically display devices remotely
monitored by HP Remote Support tools. With Insight Online's easy navigation you can efficiently track your IT
support contracts and device status from anywhere and at anytime. http://www.hp.com/go/insightonline
Get connected to HP To get the most from your investment in HP Servers, get connected to HP using our innovative remote
support technology which provides system health monitoring, pre-failure alert notification and more. For
details, visit http://www.hp.com/services/getconnected
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 11
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Optional Features
Expansion Blade
Support
Supports one (1) optional D2220sb storage or PCI expansion blade
NOTE: Expansion blade support requires the use of either the HP Dynamic Smart Array B140i or the HP Smart
Array P246br controller.
NOTE: Expansion blade support requires server firmware versions from SPP 2015.04 or later.
Factory Express
HP Factory Express offers configuration, customization, integration and deployment services for HP servers
Portfolio for Servers and storage products. Customers can choose how their factory solutions are built, tested, integrated,
and Storage
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. HP products supported through Factory Express include a wide array of servers and storage: HP
Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www8.hp.com/us/en/campaigns/factory-express/server-storagenetworking.html
HP Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hp.com/SimplifiedConfig/Index
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 12
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
Service and Support
HP Technology Services for BladeSystem
HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap
into the knowledge of millions of devices and thousands of experts to stay informed and in control,
anywhere, any time.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack Services enable you to order the right service level, length of coverage and response time as
you purchase your new server, giving you full entitlement for the term you select.
Optimized Support
recommendation
HP Proactive Care Advanced - 24x7 coverage, three year Care Pack Service
Achieve a higher return on your product investment with the personal attention from a locally assigned
Account Support Manager who delivers recommendations designed to improve availability and
performance. Leverage your system’s ability to connect to HP for automated problem detection and rapid
critical event management to increase stability and reduce unplanned downtime. This recommendation
provides 24x7 coverage with four-hour response for hardware and two-hour callback for supported
software. Collaborative call management comes with Proactive Care Advanced or you may choose full
support from HP where we own all cases through to resolution. HP is a leading provider of support
services for most operating systems used on HP BladeSystem with long, successful partnerships with
vendors such as Microsoft, Red Hat, VMware, SUSE and others. Purchasing software support from HP
simplifies troubleshooting and shortens time to resolution with one call for hardware or software
questions.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en
HP ProLiant Blade Server Hardware Installation
This easy-to-buy, easy-to-use HP Care Pack service helps ensure your new HP BladeSystem hardware is
installed smoothly, efficiently and with minimal disruption to your IT and business operations.
http://www.hp.com/services/bladesystemservices
Standard Support
recommendation
HP Proactive Care - 24x7 coverage, three year Care Pack Service
This service helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and
proactive consultations when your products are connected to HP. It combines three years’ proactive
reporting and advice with 24x7 four hour response coverage and enhanced escalation management. It
also includes collaborative call management with two hour call back on software questions to reduce
troubleshooting on hardware and industry leading software.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HP ProLiant Blade Server Hardware Installation
Same as in Optimized support recommendation
http://www.hp.com/services/bladesystemservices
Related Services
Data Center Platform Consulting Services
Choose HP Technology Services Consulting to modernize and migrate your key systems. These services
help fine tune your data center to improve security, management and efficiency across IT infrastructure,
operations, and facilities and prepare you for the new style of IT. HP understands the needs of the data
center of the future and will serve as your guide for the journey.
http://www.hp.com/services/consulting
Data Privacy Services
Protect your data through better media management. HP Data privacy services help manage and protect
sensitive data to reduce the risk of unauthorized access to private information and help meet compliance
requirements. Our retention services allow you to keep drives and other devices upon failure with
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 13
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
Defective Media Retention and Comprehensive Defective Material Retention, our removal services provide
convenient data sanitization and our recovery services allow you to safely retire IT assets and capture any
remaining value from the hardware.
http://www.hp.com/services/dataprivacy
Factory Express for Servers and storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Choose how your factory solutions are built, tested, integrated, shipped
and deployed.
http://www.hp.com/go/factory-express
Additional hardware Installation services for HP BladeSystem
In addition to hardware installation of your Blade server, HP offers installation and startup services for
your BladeSystem and Network infrastructure.
http://www.hp.com/services/bladesystemservices
HP Foundation Care
HP Foundation Care provides hardware and software support, enabling faster resolution of problems on
HP and third party products. Standard service levels have been simplified, making it even easier for you to
determine the right level of coverage for your SLA and budgetary requirements.
http://www.hp.com/services/foundationcare
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 14
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
E5-2600 v3 series Processors
HP ProLiant BL460c
Gen9 E5-2609v3 1P
16GB-R H244br
Entry Server
727026-B21
Processor(s)
Cache Memory
Memory
HP ProLiant BL460c
Gen9 E5-2620v3 1P
16GB-R H244br
Entry Server
727027-B21
Processor(s)
(1) Intel® Xeon® E5-2609 v3 (1.9GHz/6-core/15MB/6.4GT-s QPI/85W, DDR4-1600)
15MB (1x15MB) Level 3 cache
16GB (2x 8GB) PC4-2133P-R (DDR4-2133) Registered DIMMS at 1.2V)
NOTE: Total of 16 DIMM slots.
Network Controller HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
Storage Controller HP Smart HBA H244br Controller with RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2620 v3 (2.40GHz/6-core/15MB/8.0GT-s QPI/85W, DDR4-1866,
HT, Turbo2)
Cache Memory
15MB (1x15MB) Level 3 cache
Memory
16GB (2x 8GB) PC4-2133P-R (DDR4-2133) Registered DIMMS at 1.2V)
NOTE: Total of 16 DIMM slots.
Network Controller HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
Storage Controller HP Smart HBA H244br Controller with RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 3.2TB ; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 15
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Models
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
Warranty
HP ProLiant BL460c Processor(s)
Gen9 E5-2640v3 1P
32GB-R P244br Base Cache Memory
Server
Memory
727028-B21
(1) Intel® Xeon® E5-2640 v3 (2.6GHz/8-core/20MB/8.0GT-s QPI/95W, DDR4-1866, HT,
Turbo2)
20MB (1x20MB) Level 3 cache
32GB (2x 16GB) PC4-2133P-R (DDR4-1866 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Network Controller HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
Storage Controller HP Smart Array P244br Controller with 1GB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
HP ProLiant BL460c Processor(s)
Gen9 E5-2650v3 1P
32GB-R P244br Base Cache Memory
Server
Memory
727029-B21
(1) Intel® Xeon® E5-2650 v3 (2.3GHz/10-core/25MB/9.6GT-s QPI/105W, DDR4-2133,
HT, Turbo2)
25MB (1x25MB) Level 3 cache
32GB (2x 16GB) PC4-2133P-R (DDR4-2133 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Network Controller HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
Storage Controller HP Smart Array P244br Controller with 1GB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year3-year Labor, 3-year on-site support.
HP ProLiant BL460c
Gen9 E5-2660v3 2P
64GB-R P244br
Processor(s)
Cache Memory
(2) Intel® Xeon® E5-2660 v3 (2.6GHz/10-core/25MB/9.6GT-s QPI/105W, DDR4-2133,
HT, Turbo2)
25MB (1x25MB) Level 3 cache
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 16
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Models
Performance Server Memory
727030-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
64GB (4x 16GB) PC4-2133P-R (DDR4-2133 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
HP Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD 1.6TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year3-year Labor, 3-year on-site support.
HP ProLiant BL460c Processor(s)
Gen9 E5-2670v3 2P
128GB-L P244br
Cache Memory
Performance Server
Memory
727031-B21
(2) Intel® Xeon® E5-2670 v3 (2.3GHz/12-core/30MB/9.6GT-s QPI/120W, DDR4-2133,
HT, Turbo2)
30MB (1x130MB) Level 3 cache
128GB (4x 32GB) PC4-2133P-L (DDR4-2133) Registered DIMMs at 1. 2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Network Controller HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
Storage Controller Smart Array P244br Controller with 1GB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year3-year Parts, 3-year Labor, 3-year on-site support.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 17
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server). To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c Gen9 E5-v3 10Gb/20Gb FlexibleLOM Configure-to-order Blade Server
727021-B21
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported 10Gb/20Gb
FlexibleLOMs (see Step 2)
Two (2) HP small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management (standard)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one xxxxxxB21 in Step 4.
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit
726987-L21
726988-L21
726989-L21
726990-L21
726991-L21
726992-L21
726993-L21
726994-L21
726995-L21
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO Processor Kit
726996-L21
726997-L21
726999-L21
727000-L21
727001-L21
727002-L21
727003-L21
765268-L21
767049-L21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 18
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO Processor Kit
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3,
the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration,
there are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2603 v3 and E5-2609 v3.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost
Technology. The frequency boost increment is dependent on the processor SKU and the
number of active cores. In general, a higher boost increment is obtained when fewer cores
are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot
1). A processor must be installed in processor slot 2 for access to the second mezzanine
expansion slot (expansion slot 2).
NOTE: The letter "L" following the model number indicates denotes lower wattage.
HP Memory
773123-L21
773124-L21
779795-L21
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this
server. HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen9. For additional information, please
see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a
server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the
Online Memory Configuration Tool at:
http://h22195.www2.hp.com/DDR4memoryconfig/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
759934-B21
726718-B21
726719-B21
728629-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726722-B21
726720-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 19
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
HP Networking
792278-B21
726724-B21
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay 1
and the other to bay 2.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB FIO Adapter
HP FlexFabric 20Gb 2-port 650FLB FIO Adapter
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB FIO Adapter
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://www.hp.com/go/ProLiantNICs
700066-B21
700764-B21
766491-B21
684214-B21
Step 3: Choose Additional Factory Integration Options
HP Insight Software HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO
License
Converged
Infrastructure
Management
Software
HP OneView with iLO Advanced - Server hardware required on same purchase order
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP Storage
Controllers
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int FIO SAS Controller
HP Smart Array P246br/1GB FBWC 12Gb 4-ports Int FIO SAS Controller
HP Smart Array P741m/4GB FBWC 12Gb 4-ports Ext Mezzanine SAS Controller
HP H244br 12Gb 2-ports Int FIO Smart Host Bus Adapter
HP FIO Enable Smart Array B140i Setting
NOTE: The HP Smart Array B140i Controller (chipset SATA) comes standard with the HP
BL460c Gen9 10Gb/20Gb FLB CTO Blade (727021-B21). If neither the HP Smart Array
P244br nor the HP H244br controllers are chosen, a SATA cable will be provided to support
SATA devices for the two internal drives. If RAID is required when using the B140i, please
choose ‘HP FIO B140i RAID Enable Kit - BIOS Setting’ (784308-B21).
NOTE: The HP Smart Array P246br controller is only required when using an expansion blade
with the BL460c Gen9.
C6N36A
E5Y35AAE
F6Q89A
761871-B21
749975-B21
726782-B21
761878-B21
784308-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options and
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 20
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
Additional sections below; or the following:



HP BladeSystem c3000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04123379
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04229580
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 21
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
HP Networking
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when connected
to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to an
interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb
interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem
c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312720
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347342
10 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/14619_div/14619_div.html
HP Ethernet 10Gb 2-port 560M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/14478_div/14478_div.html.
1 Gigabit Ethernet Mezzanine Cards
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/14335_div/14335_div.html
700076-B21
700767-B21
700748-B21
665246-B21
615729-B21
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors and is already included in the pre-configured models. However, it must be added
in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change
these original FlexibleLOMs.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04312719
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347341
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04347246
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://h18000.www1.hp.com/products/quickspecs/14331_div/14331_div.html
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
700065-B21
700763-B21
766490-B21
655639-B21
Page 22
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
HP Infiniband Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in mezzanine slot 2, both ports are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and
InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12586_div/12586_div.html
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in either mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and
may be installed in either mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HP Fibre Channel
HP Processors
HP LPe1605 16Gb Fibre Channel HBA for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://h18000.www1.hp.com/products/quickspecs/ 14742_div/ 14742_div.html
HP QMH2672 16Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04126962
764282-B21
764283-B21
702213-B21
718203-B21
710608-B21
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit
726987-B21
726988-B21
726989-B21
726990-B21
726991-B21
726992-B21
726993-B21
726994-B21
726995-B21
726996-B21
726997-B21
726999-B21
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit
727000-B21
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) Processor Kit
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3,
727001-B21
727002-B21
727003-B21
765268-B21
767049-B21
773123-B21
773124-B21
779795-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 23
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration,
there are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2603 v3 and E5-2609 v3.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost
Technology. The frequency boost increment is dependent on the processor SKU and the
number of active cores. In general, a higher boost increment is obtained when fewer cores
are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot
1). A processor must be installed in processor slot 2 for access to the second mezzanine
expansion slot (expansion slot 2).
NOTE: The letter "L" following the model number indicates denotes lower wattage.
HP Memory
HP Solid State M.2
SATA Drives
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this
server. HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen9. For additional information, please
see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a
server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the
Online Memory Configuration Tool at:
http://h22195.www2.hp.com/DDR4memoryconfig/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
759934-B21
726718-B21
726719-B21
728629-B21
726722-B21
726720-B21
792278-B21
726724-B21
NOTE: The solid state M.2 SATA drives plug directly into a connector on the system board
and do not use a SFF drive cage slot.
NOTE: RAID 1, 0 are provided through the B140i in UEFI BIOS mode only.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 24
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
HP Dual 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HP 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HP Hard Drives
NOTE: The ProLiant BL460c Gen9 server includes the HP hot-plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives
from generation G7 servers and before are not compatible with the BL460c Gen9 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is
not supported.
NOTE: HP hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
6G SATA LE Hot Plug SFF (2.5-inch) SC EL G1 Solid State Drives
HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State
Drive
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04111725.
12G SAS (2.5-inch) 512e SC HDD
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty Hard Drive
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard Drive
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html.
6G SATA (2.5-inch) 512e SC HDD
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
12G SAS Write Intensive SFF (2.5-inch) SC 3yr Wty H2 Solid State Drive
HP 200GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 400GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 1.92TB 12G SAS Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
12G SAS SFF (2.5-inch) SC 3yr Wty H2 Solid State Drive
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
775588-B21
785233-B21
756601-B21
655710-B21
655708-B21
748387-B21
765464-B21
791034-B21
765466-B21
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
652749-B21
652745-B21
765453-B21
765455-B21
802578-B21
802582-B21
802586-B21
802891-B21
Page 25
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
6G SATA Value Endurance SFF (2.5-inch) SC Enterprise Value M1 Solid State Drives
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
6G SAS VE (2.5-inch) SC EV Solid State Drives
781518-B21
785069-B21
781516-B21
785067-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
6G SATA 2.5in WI-PLP SC SSD
756636-B21
HP 1.2TB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804677-B21
HP 800GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804671-B21
HP 400GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804665-B21
HP 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804639-B21
717965-B21
734360-B21
757339-B21
717973-B21
739898-B21
717971-B21
739888-B21
717969-B21
764923-B21
764925-B21
764927-B21
764929-B21
691868-B21
691866-B21
691864-B21
691862-B21
6G SATA 2.5in MU-PLP SC SSD
HP 1.6TB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804631-B21
HP 800GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804625-B21
HP 480GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
832414-B21
HP 200GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804613-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 26
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
6G SATA 2.5in RI-PLP SC SSD
HP 1.6TB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804605-B21
HP 800GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804599-B21
HP 480GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804593-B21
HP 240GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804587-B21
HP 120GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804581-B21
HP 80GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804575-B21
12G SAS ME SFF (2.5-inch) SC Enterprise Mainstream H2 Solid State Drives
HP 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
779176-B21
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
762263-B21
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
762261-B21
779164-B21
779168-B21
779172-B21
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
HP 1.92TB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
817011-B21
HP 960GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816995-B21
HP 480GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816985-B21
HP 240GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816975-B21
HP 120GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816965-B21
6G SATA Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
HP 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816929-B21
HP 1.92TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816919-B21
HP 960GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816909-B21
HP 480GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816899-B21
HP 240GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816889-B21
HP 120GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816879-B21
6G SATA Read Intensive (2.5-inch) SC G2 Solid State Drive
HP 240GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
789135-B21
HP 480GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
789145-B21
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759208-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759210-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759212-B21
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is
not supported
NOTE: Please see the QuickSpecs for technical specifications and information at
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 27
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Core Options
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 28
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Additional Options
HP Insight software
HP iLO Advanced
License
Converged
Infrastructure
Management
Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electronic
License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and Virtual
Connect Enterprise Manager software. Uses an integrated installer to perform quick and
accurate software installation and updates.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses
with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7
HP Software Technical Support Service.
NOTE: Licenses ship without media. The HP Insight Management Media Kit can be ordered
separately, or can be downloaded at http://www.hp.com/go/insightupdates
NOTE: For additional license kits, please see the QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04123391
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three years
of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the iLO
QuickSpecs at http://www.hp.com/go/iLO
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three year
of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_div/14276_div.html
HP OneView
HP OneView with iLO Advanced
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
HP OneView w/o iLO including 3yr 24x7 Support 1 Server LTU
HP OneView w/o iLO including 3yr 24x7 Support Flex Quantity E-LTU
HP OneView w/o iLO including 3yr 24x7 Support FIO 1 Server LTU
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
E6U63ABE
BD502A
E6U60ABE
512488-B21
E5Y34A
E5Y35AAE
E5Y37A
P8B24A
P8B26AAE
P8B31A
Page 29
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Additional Options
HP OneView without iLO Advanced
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_div/14621_div.html.
High Performance
Clusters
HP I/O Accelerator
Options
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses and
support with a single activation key. Each license is for one node (server). Customer will
receive a printed end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in order to obtain a
license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html.
HP 1.2TB Multi Level Cell IO Accelerator for BladeSystem c-Class
HP 785GB Multi Level Cell IO Accelerator for BladeSystem c-Class
HP 365GB Multi Level Cell IO Accelerator for BladeSystem c-Class
NOTE: HP I/O Accelerator cards can be used in legacy BIOS mode only.
HP 1.2TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
HP 1.6TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
E5Y38A
E5Y39AAE
QL803B
BD476A
BD477A
QK763A
QK762A
QK761A
794603-B21
794605-B21
HP Security
HP Trusted Platform Module Option
HP Trusted Platform Module 2.0 Kit
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can include passwords,
certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a
data protection feature available in Windows Server® 2008 R2 and 2012. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version
1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 R2 and 2012 has not been tampered with while the system
was offline.
NOTE: For more information about TPM, including a white paper, go to
http://h20195.www2.hp.com/v2/getpdf.aspx/4AA5-4782ENW.pdf
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
745823-B21
HP Storage
Controllers
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int SAS Controller
HP H244br 12Gb 2-ports Int Smart Host Bus Adapter
HP Smart Array P246br/1GB FBWC 12Gb 4-ports Int SAS Controller
NOTE: The HP Smart Array P246br controller is only required when using an expansion
blade with the BL460c Gen9.
749680-B21
726809-B21
726793-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 30
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Additional Options
HP Secure Encryption HP Secure Encryption No Media E-LTU per Drive
HP Secure Encryption No Media Flexible License per Drive
HP Secure Encryption per Svr Entitlement
NOTE: HP Secure Encryption is supported on the HP Smart Array P244br and H244br
(running in RAID mode) as an option. HP Secure Encryption licensing is based on the number
of physical drives requiring encryption.
NOTE: For more information about HP Secure Encryption, go to
http://www.hp.com/go/hpsecureencryption.
HP InfiniBand
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
Mezzanine Adapters (regardless of operating mode). When installed in any other mezzanine slot, both ports are
active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and
InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12586_div/12586_div.html
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and
may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HP Flash Media Kits
for USB Drives
HP Care Pack
Services
HP Flash Media Kits for USB Drives
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP Dual 8GB microSD Enterprise Midline USB Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
D8S85AAE
D8S84A
C9A82AAE
764282-B21
764283-B21
702213-B21
737953-B21
726116-B21
700139-B21
741279-B21
Proactive Care Services
HP 3 year 24x7 BL4xxc Gen9 Proactive Care Service
HP 3 year 24x7 with Defective Media Retention BL4xxc Gen9 Proactive Care Service
HP 3 year 24x7 BL4xxc Gen9 Proactive Care Advanced Service
HP 3 year 24x7 with Defective Media Retention BL4xxc Gen9 Proactive Care Advanced
Service
U7BN8E
U7BN9E
U7BT6E
U7CF8E
Installation Services
HP Install c-Class Server Blade Service
NOTE: Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
UE493E
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 31
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://h22195.www2.hp.com/DDR4memoryconfig/Home/Legal
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 v3 family or Intel® Xeon® E5-2600 v3 family processor socket contains four memory channels that
support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for the server.
Up to 64GB capacity DIMMs are supported for 1TB of memory (16 DIMM slots x 64GB per DIMM).
NOTE: 64GB DIMM support available in earl 2015.
Memory Population Rules and Guidelines:











A minimum of one DIMM is required per processor.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant
Gen9 servers support RDIMM and LRDIMM.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the BL460c Gen9 Server Blade.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
For memory population rules and additional memory guidelines, please see the BL460c Gen9 user guide at
http://www.hp.com/support.
Supported Memory Bandwidth on Intel® Xeon® E5-2600 v3 series Processors
DIMM Rank
DIMM Capacity
Single Rank
(1R)
8GB
Register DIMM (RDIMM)
Dual Rank (2R)
16GB
Voltage
Std Voltage
1.2V
12 slot servers
16 slot servers
12
16
12 slot servers
96
16 slot servers
128
256
1 DIMM Per
Channel
2 DIMM Per
Channel
2133
2133
2133
2133
8GB
32GB
Std Voltage
Std Voltage
Std Voltage
1.2V
1.2V
1.2V
SLOTS THAT CAN BE POPULATED
12
12
12
16
16
16
MAXIMUM CAPACITY (GB)*
192
96
384
128
512
POPULATED DIMM SPEED (MT/s)
2133
2133
2133
2133
Load Reduced (LRDIMM)
Dual Rank
Quad Rank (4R)
(2R)
16GB
32GB
64GB
Std Voltage
1.2V
Std Voltage
1.2V
Std Voltage
1.2V
12
16
12
16
NA
16
192
384
NA
256
512
1024
2133
2133
2133
2133
2133
2133
*Maximum Capacity will vary based on individual serve platform qualification schedule
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 32
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Memory
Memory Speed by E5-2600 v3 Series Processor Model
Processor Models
E5-2690 v3, E5-2695 v3, E5-2697 v3, E5-2698 v3, E5-2699 v3, E5-2687W v3, E5-2683 v3, E5-2680
v3, E5-2670 v3, E5-2667 v3 , E5-2660 v3, E5-2650 v3, E5-2650L, E5-2643 v3, E5-2637 v3
E5-2640 v3, E5-2630 v3, E5-2630L v3, E5-2623 v3, E5-2620 v3
E5-2609 v3, E5-2603 v3
Supported Memory Speeds
2133MHz
1866MHz
1600MHz
Standard and Maximum Memory Capacity (Pre-configured Models) for E5-2600 v3 Series
Pre Configured Models
Standard Memory
Intel Xeon E5-2670 v3
128GB
(4x 32GB)
64GB
(4x 16GB)
32GB
(2x 16GB)
16GB
(2x 8GB)
Intel Xeon E5-2660 v3
Intel Xeon E5-2650 v3, E5-2640
v3
Intel Xeon E5-2620 v3, E5-2609
v3
Maximum Memory Plus
Optional Memory
896GB
(4x 32GB + 12x 64GB)
256GB
(4x 16GB + 12x 16GB)
256GB
(2x 16GB + 14x 16GB)
240GB
(2x 8GB + 14x 16GB)
Standard Memory Replaced
with Optional Memory
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
NOTE: Support for 64GB LRDIMMs and 32GB RDIMMs to be available by early 2015.
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
 2GB = 2,048MB
 4GB = 4,096MB
 8GB = 8,192MB
 16GB = 16,384MB
 32GB = 32,768MB
Memory options part number decoder
Item
Description
Definition
1
Capacity
8 GByte
16 GByte
32 GByte
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 33
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Memory
2
Rank
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
3
Data width
x4 = 4-bit
x8 = 8-bit
4
Memory generation
DDR4
5
Max. Memory speed
2133MT/s
6
CasLatency
P = 15
6
DIMM type
R = RDIMM (registered)
L = LRDIMM (load reduced)
Following are memory options available from HP:
HP Memory
NOTE: HP memory from previous generation servers (DDR3) is not compatible with this
server. HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen9. For additional information, please
see the HP SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a
server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz.
HP SmartMemory
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
759934-B21
726718-B21
726719-B21
728629-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
792278-B21
726722-B21
726720-B21
726724-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 34
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Storage
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD hard drives
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 35
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Technical Specifications
System Unit
Dimensions (H x W x 7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
D)
(with bezel)
Weight
Maximum: all processors, 16
(approximate)
DIMMs, hard drives, mezzanine
cards, and two flash cache
batteries installed)
Minimum: one processor and 2
DIMMs installed
Power
Specifications
10.50 lb (4.75 kg)
For power specifications including input requirements, BTU rating, and power supply
output, please see the:


System Inlet
Temperature
14.00 lb (6.33 kg)
HP BladeSystem c3000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04123379
HP BladeSystem c7000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04229580
To review typical system power ratings use the HP Power Advisor which is available via
the online tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade
requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to
be configured with 6 fans.
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every
1,000 ft) above sea level to a maximum of 3,050 m
(10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and number of
options installed.
Non-operating
Extended Ambient
Operating Support
System performance may be reduced if operating with
a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change
is 20°C/hr (36°F/hr).
For Approved hardware configurations, the supported system inlet range is extended
to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft)
NOTE: Qualifications for extended ambient configurations are detailed at:
https://www.hp.com/servers/ASHRAE
Relative Humidity
(non-condensing)
Operating
Non-operating
Altitude
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing.
3,050 m (10,000 ft). This value may be limited by the
type and number of options installed. Maximum
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 36
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Technical Specifications
Non-operating
Acoustic Noise
allowable altitude change rate is 457 m/min (1,500
ft/min).
9,144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1,500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
HP Smart Array
P244br Controller
Disk Drive Interface 12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
Server Interface
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
Cache Memory
1GB flash backed write cache (FBWC) cache standard
Logical Drives
64 (with included 1GB cache)
Supported
Host Memory
64-bit, supporting servers memory space greater than 4GB
Addressing
RAID Support
RAID 1 (mirroring), RAID 0 (striping), RAID 10
Other
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
HP Smart HBA
H244br Controller
Disk Drive Interface 12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
Server Interface
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
Cache Memory
None
Logical Drives
64
Supported
Host Memory
64-bit, supporting servers memory space greater than 4GB
Addressing
RAID Support
RAID 1 (mirroring) and RAID 0 (striping)
Other
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
HP Dynamic Smart
Array B140i
Controller
Disk Drive Interface
Server Interface
SAS Connectors
Cache Memory
SAS Speed
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
6Gb/s SATA (Serial ATA)
Embedded x4 PCIe 2.0
2 internal SATA ports
None
6Gb/s SATA links
Up to 10 logical volumes (2 physical drives)
64-bit, supporting greater than 4GB server memory space
Yes
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 37
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Technical Specifications
RAID Support
Other
HP FlexFabric 10Gb
2-port 536FLB
FlexibleLOM
Type
Network Processor
Data Transfer
Method
Network Transfer
Rate
IEEE Compliance
Standard Features
HP FlexFabric 20Gb
2-port 650FLB
FlexibleLOM
Type
Network Processor
Data Transfer
Method
Network Transfer
Rate
IEEE Compliance
Standard Features
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable firmware with recovery ROM
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardwarebased iSCSI, iSCSI boot, TCP/IP offload engine, and autosencing 1Gb/10Gb Ethernet
capability)
QLogic 57840S with integrated MAC/PHY
x8 PCI Express 3.0
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb HP
BladeSystem c-Class interconnect components. Both ports will operate at the same
speed.
NOTE: Each port on the 536FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x
Full hardware offload of iSCSI and FCoE storage protocol processing for highest
performance
converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the flexibility to
choose the
type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports HP's Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb Flex-10 Virtual
Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per port, in
increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.
10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Support for Network Partitioning (NPAR)
Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE, RoCE,
Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot, TCP/IP offload
engine, and autosencing Ethernet speed capability)
Emulex XE-104
x8 PCI Express 3.0
Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bi-directional theoretical
bandwidth
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg, 802.1Qbb,
802.1Qaz, 802.3ap
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 38
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Technical Specifications
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency
(6125XLG only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other
Concurrent Storage – concurrently supports NIC, FCoE, and iSCSI storage functions on
the same port (NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports HP's Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications, mobile
messaging, and social media
User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual
Connect module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per
port, in increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot exceed
port bandwidth i.e. 20 Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Supports Wake On LAN (WOL)
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office. Products
returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard web site at:
http://www.hp.com/go/green. These instructions may be used by recyclers and other
WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 39
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Summary of Changes
Date
09-Oct-2015
Version History
From Version 15 to 16
Action
Changed
Added
Removed
28-Sep-2015
From Version 14 to 15
Added
28-Aug-2015
From Version 13 to 14
Changed
Added
17-Aug-2015
From Version 12 to 13
Changed
Added
Removed
19-Jun-2015
1-Jun-2015
From Version 11 to 12
From Version 10 to 11
Changed
Changed
Added
Removed
6-Apr-2015
From Version 9 to 10
Changed
30-Mar-2015
From Version 8 to 9
Added
Description of Change
Core Options section was updated.
Skus added:
 P8B24A
 P8B26AAE
 P8B31A
Obsolete skus were deleted:
 756621-B21
 756657-B21
 789155-B21
SKU added in Additional Options:
745823-B21
Information in Core Options section was updated.
SKUs added in Core Options section:
659818-B21
651281-B21
Standard Features, Optional Features, Configuration
Information - Factory Integrated Models, Core Options and
Memory sections were updated.
SKUs added in Additional Options and Core Options
sections:
C9A82AAE
804677-B21
804671-B21
804665-B21
804639-B21
804631-B21
804625-B21
832414-B21
804613-B21
804605-B21
804599-B21
804593-B21
804587-B21
804581-B21
804575-B21
Obsolete SKU deleted:
F6Q89AAE
Information updated.
Information in Optional Features, Configuration
Information- Factory Integrated, and Models sections was
updated.
SKUs added:
726724-B21
748387-B21
791034-B21
726793-B21
SKUs removed:
726793-B21
741159-B21
741151-B21
Industry Standard Compliance and Additional Options
sections were updated
SKUs Added:
741279-B21
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 40
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Summary of Changes
Removed
27-Feb-2015
From Version 7 to 8
Changed
9-Feb-2015
From Version 6 to 7
Changed
Added
12-Dec-2014
From Version 5 to 6
Removed
Changed
Added
1-Dec-2014
From Version 4 to 5
Changed
Added
10-Oct-2014
From Version 3 to 4
Removed
Changed
728629-B21
726793-B21
749975-B21
726782-B21
727261-B21
802578-B21
802582-B21
802586-B21
802891-B21
781516-B21
785067-B21
765453-B21
765455-B21
765464-B21
765466-B21
789135-B21
789145-B21
789155-B21
794603-B21
794605-B21
781518-B21
785069-B21
Obsolete SKUs Deleted:
741146-B21
741138-B21
Smart Buy 779805-S01 processor was updated in Product
Bulleting US version.
Core Options and Additional Options sections were
updated
SKUs Added on Hard Drives section:
779164-B21
779168-B21
779172-B21
779176-B21
764923-B21
764925-B21
764927-B21
764929-B21
SKUs removed: 728935-B21, 718939-B21
Descriptions were updated throughout the QuickSpecs.
SKU Added on HP Smart Memory: 792278-B21
Overview, Standard Features, Configuration Information Factory Integrated Models and Core Options sections were
updated
SKUs added:
759934-B21
726720-B21
775588-B21
785233-B21
757339-B21
756657-B21
756621-B21
SKU E5Y35AAE deleted due to compatibility issues
Smart Buy section added to the NA version only
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 41
QuickSpecs
HP ProLiant BL460c Gen9 Server Blade
Summary of Changes
8-Oct-2014
From Version 2 to 3
Changed
Added
17-Sep-2014
From Version 1 to 2
Removed
Changed
Network Controller, Enclosures and Compatible SAN
sections were updated
HP I/O Accelerator Options section has been added
including following SKUs:
QK763A
QK762A
QK761A
Expansion Blade Support section was deleted
Changes made throughout the Standard Features, Models,
SmartMemory, Core Options and Carepacks sections
© Copyright 2015 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04347343 - DA - 15052 Worldwide - Version 16 – October 9, 2015
Page 42