HP DL380z Generation8 Gen8 Virtual Workstation

HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Overview
HP DL380z Generation8 (Gen8) Virtual Workstation
The HP DL380z Gen8 Virtual Workstation sets the new standard of 2U rack mount 2-socket rack virtual workstation
solutions for the industry. With enhanced configuration flexibility, unmatched performance, and leading energy efficient
design, the HP DL380z Gen8 offers the perfect solution to address the emerging demands for virtual workstation
capabilities.
The HP DL380z Gen8 Virtual Workstation is a focused 2U 2-socket rack ecosystem solution based on the proven
technologies offered on the HP Proliant DL380p Gen8 server. As such, this QuickSpec will reference supporting
documents that detail the HP Proliant server product offerings and descriptions. This is intentional since the HP DL380z
Gen8 is based on the same technologies.
Front View:
1.
Quick removal access panel
2.
Second Intel Processor
3.
First Intel Processor
4.
24 DIMM slots: DDR3 Registered (RDIMM)
5.
Air Baffle
6.
Hot-plug fans, full N+1 redundancy
7.
8.
Health LED
Power On /Standby button and system power LED
button
USB connector
Unit ID LED
9.
10.
Rear View:
1.
PCIe 3.0 Slots 1, 2, 3-PCIe 2.0 top to bottom
2.
PCIe 3.0 Slots 4-6 top to bottom
3.
Power supply 1
4.
Power supply 1 Power LED
5.
Power supply 1 Power connection (with Intelligent
PDU communication)
6.
Power supply 2 Power connection (with Intelligent
PDU communication)
7.
Power supply 2 Power LED
8.
Power supply 2
9.
10.
Unit ID LED/Button
USB connectors (4)
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information
- Factory Integrated Models" section.
Processor
E5-2600 v2 series Processors
One of the following
Base Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
Intel® Xeon® E5-2630 v2 (2.6GHz/6-core/15MB/7.2GT-s QPI/80W, DDR3-1600, HT, Turbo23/3/3/3/4/5)
Performance Processors
NOTE: All support up to 1866MHz DDR3 memory speeds.
Intel® Xeon® E5-2695 v2 (2.4GHz/12-core/30MB/8.0GT-s QPI/115W, DDR3-1866, HT,
Turbo2- 4/4/4/4/4/4/4/4/5/6/7/8)
Intel® Xeon® E5-2680 v2 (2.8GHz/10-core/25MB/8.0GT-s QPI/115W, DDR3-1866, HT,
Turbo2- 3/3/3/3/3/4/5/6/7/8)
Intel® Xeon® E5-2670 v2 (2.5GHz/10-core/25MB/8.0GT-s QPI/115W, DDR3-1866, HT,
Turbo2- 4/4/4/4/4/4/5/6/7/8)
Intel® Xeon® E5-2650 v2 (2.6GHz/8-core/20MB/8.0GT-s QPI/95W, DDR3-1866, HT, Turbo24/4/4/4/5/6/7/8)
Cache Memory
One of the following
30MB (1x30MB) Level 3
NOTE: For Twelve-core processors.
25MB (1x25MB) Level 3
NOTE: For Ten-core processors.
20MB (1x20MB) Level 3
NOTE: For Eight-core processors.
15MB (1x15MB) Level 3
NOTE: For Six-core processors.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
Chipset
Intel® C600 Series Chipset
Intel® E5-2600 v2 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to 2 processors (24 Cores)
Up to 24 DIMM slots available for higher Memory capacity
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Standard Features
and all multi-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are
supported (x8 requires lockstep mode).
Online Spare
NOTE: Memory online spare mode (also known as rank spare mode) detects a rank that is
degrading and switches operation to the spare rank.
Lock-step mode
NOTE: Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM.
The DIMMs in each paired memory channel must have identical HP part numbers.
Memory
Type
DIMM Slots Available
HP SmartMemory
Registered (RDIMM)
24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs
per channel)
384GB (24x 16GB RDIMM @1866MHz)
Maximum Capacity
(RDIMM)
NOTE: For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: The DL380z Gen8 Virtual Workstation supports only RDIMM.
NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: Depending on the memory configuration and processor model, the memory speed may
run at 1866MHz, 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or
the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Network Controller
Expansion Slots
Primary Riser
(Must order option
766993-B21)
HP DL380z Gen8 Virtual Workstation offers a new flexible network technology - FlexibleLOMs.
The HP DL380z Gen8 offers the customer the choice of 1Gb or 10Gb networking solutions. For
additional details see the Networking Section of this document.
One of the following
HP VWS Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HP Ethernet 1Gb 4-port 366FLR FIO Adapter
Expansion Technology
Slots #
1
PCIe 3.0
2
PCIe 3.0
Bus
Width**
X16
Connector
Width
X16
Bus
Number*
5
X8
X8
4
Form
Factor
Full Length,
Full Height
Slot
Full Length,
Full Height
Slot
Notes
Proc 1
Proc 1
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Standard Features
assignment number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed
HP DL380z ROM
The HP DL380z Gen8 ROM identifies itself as an HP Proliant DL380p Gen8 platform. This is to
be expected and is correct behavior.
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service.
This signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to
continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are
discovered during this early phase of hardware initialization, suitable messages are now
displayed on the connected monitor. Additionally, these configuration or hardware errors are
logged to the Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user
guide: www.hp.com/support/rbsu.
Storage Controller
Internal Storage
Devices
HP Smart Array P420i/2GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Diskette Drive
None
Optical Drive
Hard Drives
Drive Bays
Optional: DVD-ROM, DVD-RW
None ship standard
Standard: 8SFF drive bays total with Optical Bay
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Standard Features
FlexibleLOM Network
Ports
HP iLO Remote
Management Network
Port
SD slot
USB 2.0 Ports
Can be configured with 4 x 1Gb ports or with 2 x 10Gb ports (See HP
Networking section below for more details and options).
1 Gb Dedicated
1 Internal Secure
NOTE: The SD slot is not a hot-pluggable device. Customers should
not attempt to plug an SD card into the SD slot while the server is
powered.
7 total: 2 front, 4 back, 1 internal
Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
USB 2.0 Compliant
Power Cords
NOTE: HP DL380z Gen8 Virtual Workstations are primarily connected to power distribution
units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power
cord (A0K02A). If a user wishes to power an HP DL380z using a 110V receptacle (NEMA-15),
the 6-foot NEMA 5-15 to C13 power cord must be ordered separately (AF556A). See Power
Cords section for Worldwide Power Cord options.
Power Specifications
To review typical system power ratings use the HP Power Advisor which is available via the
online tool located at URL: www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be found
at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Common Slot Power
Supply
NOTE: Mixing of power supplies in the same system is not supported. All power supplies inside
a system must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified
power supplies is not supported.
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide
range of ProLiant, HP Virtual Workstation, and Integrity servers, as well as HP Storage
solutions, and are designed to provide the highest power supply efficiency without degrading
system performance. HP CS power supplies are tested by the Electric Power Research
Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP CS power
supply options provide efficiency ratings of up to 94% (80 Plus Platinum). Only the 1200W
power supply is available for the DL380z Gen8 Virtual Workstation. All HP Common Slot power
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Standard Features
The HP DL380z supports only the 1200W Platinum Plus power supply. A second redundant
1200W power supply can be ordered.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through
power supply option kits (see Power Supplies for part numbers).
NOTE: Power Specification and Technical Content for supported power supplies can be found
at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
System Fans
One of the following
2P Models have (6) (N+1 redundancy standard)
1P Models have (4) (N+1 redundancy standard)
Required Cabling
For required cabling information, refer to the HP Web site at: www.hp.com/servers/dl380pgen8.
Operating Systems
and Virtualization
Software Support for
HP DL380z Virtual
Workstations
VMware
Citrix XenServer
NOTE: Choice of hypervisor solution will depend on chosen GPU virtualization strategies.
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Virtual Workstation Graphics options:
NVIDIA Quadro K4000 3GB graphics (up to 3) only for pass through GPU virtualization
solutions
NVIDIA Quadro K5000 4GB graphics (up to 2) only for pass through GPU virtualization
solutions
NVIDIA Quadro K6000 12GB graphics (up to 2) only for pass through GPU
virtualization solutions
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Standard Features
lifecycle of the DL380z Gen8, from initial deployment, through
ongoing management, to service alerting and remote support.
HP iLO Management Engine comes standard on all HP
DL380z Gen8 virtual workstations. The HP iLO Management
Engine portfolio includes:
o HP iLO: The HP iLO (Integrated Lights-Out)
management processor is the core foundation for the
HP iLO Management Engine
o HP Agentless Management: Provides built in system
health monitoring and alerting capability without OS
agents, that starts working the moment a power cord
and an Ethernet cable are connected.
o HP Active Health System: Always on, continuous
monitoring for increased stability and shorter
downtimes; 100% configuration history; Health and
service alerts and easy export and upload to Service
and Support.
o HP Intelligent Provisioning: Lets customers
provision and configure a single system without any
separate media. No more SmartStart CDs or Smart
Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the DL380z
Gen8 boot process (also known as
power on self test or POST).
Please go to the Intelligent
Provisioning website at
www.hp.com/go/intelligentprovisionin
g for additional information and to
view usage videos.
Use the Service Pack for ProLiant
(SPP) at www.hp.com/go/spp to get
firmware and software updates.
o HP iLO Mobile App: Enables the ability to access,
deploy, and manage your system anytime from
anywhere from select smartphones and mobile
devices. For additional information please visit:
www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Standard Features
web page provides access to a single download containing both the
latest version of HP SUM and the latest SPP. Optional smaller
subsets with only specific types of systems or specific operating
systems are offered to save on download time. The HP SUM
application provides a straightforward, intuitive user interface that
guides the user through the steps of discovery, analyses and update,
providing comprehensive information on available updates, criticality
and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which
can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While HP
SUM and the SPP recommend the combinations of firmware and
system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant and DL380z Virtual Workstation has
been rigorously tested with specific attention for interaction between
firmware, drivers and agents both within the system. This testing
ensures the highest quality as well as providing the input for HP SUM
to deploy updates taking into account all interdependencies, when
determining the correct updates and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can
be downloaded from www.hp.com/go/spp/download. More information
can be found: http://www.hp.com/go/SmartUpdate,
www.hp.com/go/spp and http://www.hp.com/go/hpsum
Security
Power-on password
Serial interface control
Administrator's password
Warranty
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support
and repair is available for three years from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Enhancements to warranty services are
available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: DL380z Gen8 Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Optional Features
HP Insight
management
HP Insight Control
HP iLO Advanced
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console. HP
Insight Control also supports Location and Power Discovery Services
to automate many configuration, asset tracking, and power
management tasks to speed implementation and prevent downtime.
For more information, see http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information
about this service, see: http://www.hp.com/services/insight.
HP Integrated Lights-Out Advanced License a product option,
providing smart remote system management without compromise.
iLO Advanced unlocks the full set of remote administration
functionality for all HP ProLiant servers and HP DL380z Virtual
Workstation systems by activating the full Virtual Keyboard Video and
Mouse remote console, multi-user collaboration, console record and
replay, GUI-based and scripted virtual media and virtual folders, and
enhanced security and power management functionality. For more
information, see: http://www.hp.com/go/iloadvanced
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to
product and HP support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status
from anywhere and at anytime. www.hp.com/go/insightonline
Factory Express
Portfolio
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers, virtual workstations, and storage products. Customers can choose how their
factory solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include
a wide array of servers, virtual workstation, and storage and networking.
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Service and Support
Service and Support
HP Technology Services for HP DL380z Virtual Workstations
Capitalizing on HP Virtual Workstation capabilities requires a service partner who understands
your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the
experienced professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response
choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP Virtual
Workstations and software. You can choose the type and level of service that is most suitable
for your IT and business needs.
Optimized Care
Supports maintaining HP Virtual Workstations at optimum performance availability
HP Foundation Care 24x7 Service
HP Foundation Care 24x7 connects you to HP 24 hours a day, seven days a week for
assistance on resolving issues - hardware onsite response within four hours and software call
back within two hours after opening your case. Make HP your first call for hardware or software
questions; Collaborative Support is included in all Foundation Care Services for this product
and provides troubleshooting assistance on software such as Microsoft Server, Red Hat Linux,
recommended with HP Care Pack Service.
http:/ / h20195.www2.hp.com/ V2/ GetDocument.aspx?docname=4AA48876ENW&cc=us&lc=en
HP DL380z Virtual Workstation Hardware Installation
Provides for the basic hardware installation of HP branded virtual workstations, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely
and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
Related Services
Additional HP Care Pack services can be found at:
http://www.hp.com/go/cpc
Insight Online/Insight
Remote Support
HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and
problem resolution. This comes at no additional cost with your HP solution. Learn more about
Insight Remote Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Service and Support
Parts and Material
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by HP due to malfunction.
For more information
To learn more about the HP DL380z Gen8 Virtual Workstation, please contact your HP sales
representative or HP Authorized ServiceOne Channel Partner. Or visit:
http://www.hp.com/services/proliant
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial
hard drives ordered with the DL380z Virtual Workstation.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP DL380z Gen8 8 SFF Configure-to-order Virtual Workstation
Factory Integrated Model ships with:
1 FlexibleLOM connector: (see Step 2: HP FlexibleLOM section below for NIC
choices to populate the embedded connector)
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots Must order option HP DL380z Gen8 Double Wide Slot1 FIO Riser
Cage (766993-B21):
766982-B21
Slot 1 - FL/FH x16 PCIe 3.0 (x16 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information
and Options subsection.
System Fans - 4 (2 additional fans included with second processor)
Drive Cage - 8SFF (Optical media drive cage optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: Power Supply & Rail Kit not included - choose from Step 3 & 4
sections below
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP Processors
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxxB21
Base Processors - E5-2600 v2 series Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
HP DL380z Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO
Processor Kit
766984-L21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
HP Memory
rd
NOTE: No other HP memory not listed in this QuickSpec or from any other 3
party provider is qualified or warranted with this HP DL380z Virtual
Workstation. HP SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen8. For
additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series
Processors.
HP VWS 8GB (1x8GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered
CAS-13 FIO Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS13 Memory Kit
HP VWS 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866)
Registered CAS-13 FIO Memory Kit
766988-B21
731761-B21
766989-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
HP Networking
FlexibleLOM Adapters
NOTE: The FlexibleLOM Adapters in this section are Factory Integrated
Options (FIO) only.
NOTE: Only one FlexibleLOM can be added to the DL380z. These options are
upgradeable and can be changed from the original configuration after the
system is shipped.
NOTE: For 10Gb adapters, a minimum of two Gigabytes (2 GB) of system
memory is required per each adapter.
HP Ethernet 1Gb 4-port 366FLR FIO Adapter
HP VWS Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
684217-B21
766990-B21
NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased
separately. Please see the related NIC QuickSpecs for Technical
Specifications and additional information: www.hp.com/go/ProLiantNICs.
HP InfiniBand
HP VWS Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP FIO
Adapter
766991-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
Intelligent PDUs.
HP DL380z 1200W Common Slot Platinum Plus Hot Plug FIO Power Supply
Kit
NOTE: For power supply redundancy, a second 1200W power supply would
need to be odered (part number 766992-B21).
NOTE: Option Kits for AC power supplies include the power supply and one
PDU IEC cable.
NOTE: The HP DL380z Gen8 ship with an IEC-IEC power cord used for rack
mounting with Power Distribution Units (PDUs). For a full list of optional HP
power cords please go to www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power
supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
766992-B21
Step 3: Choose Additional Factory Integration Options
HP IO Riser Cages
HP DL380z Gen8 Double Wide Slot1 FIO Riser Cage
NOTE: This kit is a mandatory FIO.
-NOTE: This riser supports one single wide, or one double wide GPU or
graphics adapter option in the primary riser position.
HP DL380z Gen8 Double Wide Slot2 FIO Riser Cage
NOTE: This Kit is optional, but available only as FIO.
NOTE: Two 1200W Power supply kits and 2 processors are required for this
riser
NOTE: This riser supports two single wide, or one double wide GPU or
graphics adapter option in the secondary riser position
766993-B21
HP Graphics Options
HP DL380z NVIDIA GRID K2 Reverse Air Flow PCIe GPU FIO Adapter
HP DL380z NVIDIA Quadro K4000 PCIe FIO Graphics Adapter
HP DL380z NVIDIA Quadro K5000 PCIe FIO Graphics Adapter
HP DL380z NVIDIA Quadro K6000 PCIe FIO Graphics Adapter
NOTE: Each of the HP DL380z Gen8 Dbl Wide GPU Riser Kits (766993-B21
& 766994-B21
dual GPU or dual graphics adapter configuations it is necessary to install both
GPU Riser Kits, the second processor (E5-2600v2 series only), and the
1200W Power supply (766992-B21)
766995-B21
766996-B21
766997-B21
766998-B21
HP Rack Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail
kits. Please take a moment to review the installation documentation that
comes with the system to help you with the installation of your Gen8 Virtual
766994-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
HP Insight Software
HP 2U SFF Easy Install Rail Kit
HP 2U Cable Management Arm for Easy Install Rail Kit
HP 2U SFF Easy Install Rail Kit with Cable Management Arm
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle
Single Server FIO License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
Electronic License
NOTE: The Electronic software license is available in EMEA only.
733660-B21
733664-B21
733668-B21
C6N36A
C6N36ABE
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options and Additional Options" section below. These options
are available for ordering if not chosen in previous steps, or if non-FIO (Factory Integration Option) parts are needed.
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional
information.
NOTE: Any option with an FIO designation is a Factory Integration Option only. Contact your local sales representative
for additional information.
HP Processors
HP Memory
Base Processors - E5-2600 v2 series Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
HP DL380z Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) with
Fan FIO Processor Kit
Performance Processors - E5-2600 v2 series Processors
NOTE: All support up to 1866MHz DDR3 memory speeds
HP DL380z Gen8 Intel® Xeon® E5-2695v2 (2.4GHz/12-core/30MB/115W)
with Fan FIO Processor Kit
HP DL380z Gen8 Intel® Xeon® E5-2680v2 (2.8GHz/10-core/25MB/115W)
with Fan FIO Processor Kit
HP DL380z Gen8 Intel® Xeon® E5-2670v2 (2.5GHz/10-core/25MB/115W)
with Fan FIO Processor Kit
HP DL380z Gen8 Intel® Xeon® E5-2650v2 (2.6GHz/8-core/20MB/95W) with
Fan FIO Processor Kit
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel® HyperThreading Technology
NOTE: Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing
power when you need it with performance that adapts to spikes in your
workload and delivers more performance upside than then previous
generation turbo technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
rd
NOTE: No other HP memory not listed in this QuickSpec or from any other 3
party provider is qualified or warranted with this HP DL380z Virtual
Workstation. HP SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen8. For
additional information, please see the HP SmartMemory QuickSpecs at:
766984-B21
766985-B21
766986-B21
766987-B21
766983-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model,
1600MHz and 1333MHz memory may operate at a lower speed. Please see
the see the "Memory" section later in this document and the Online Memory
Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
HP Optical Drives
HP 12.7mm Slim SATA DVD-ROM JackBlack Optical Drive
HP 12.7mm Slim SATA DVD-RW JackBlack Optical Drive
HP Hard Drives
NOTE: The HP DL380z Gen8 Smart Storage solutions are equipped with
entirely re-designed Small Form Factor (SFF 2.5 in) hot plug carriers for HP
Qualified Hard Drives and Solid State Drives. These new carriers provide
status and activity indicators as well as caution indicators for "Do Not
Remove".
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the system backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information (Worldwide):
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
652232-B21
652235-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty
Solid State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid
State Drives
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr
Wty Solid State Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr
Wty Solid State Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP VWS 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty FIO SSD
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP VWS 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty FIO SSD
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information (Worldwide):
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard
drive blanks based on the number of initial hard drives ordered with the
system.
NOTE: The part numbers for single HDD blanks below are provided should the
customer require replacement HDD blanks for their system.
HP SFF Gen8 Hard Drive Blank Kit
HP Networking
FlexibleLOM Adapters
NOTE: Only one FlexibleLOM can be added to the system usually added as
an FIO in Step 2 section. These options are upgradeable and can be changed
717965-B21
739898-B21
739888-B21
691868-B21
774115-B21
691866-B21
691864-B21
774114-B21
691862-B21
666987-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
to the HP DL380z Gen8, which is selected in Step 2 for the "Configuration
Information - Factory Integrated Models" section. This option is for upgrade or
change from original configuration.
NOTE: FLR Indicates new HP FlexibleLOM Adapter series.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter
NOTE: 10Gb Ethernet requires the use of the QSFP to SFP+ adapter P/N
655874-B21.
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP I/O Expansion
Options
HP Power Supplies
NOTE: The following Riser Cage Kits should be added in Step 2
("Configuration Information - Factory Integrated Models") using the FIO Riser
Cage Kits. The following two options are for upgrade or change from original
configuration or for non-FIO orders.
HP DL380p Gen8 Double Wide Slot1 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary
position only, and supports one double wide card and a single PCI card in this
riser.
NOTE: This riser supports one single wide, or one double wide GPU option in
the primary riser position
HP DL380p Gen8 Double Wide Slot2 Riser Cage Kit
NOTE: Kit is required to support cards greater than 9.5", in the primary
position only, and supports one double wide PCIe card or 2 single wide PCIe
card in this riser.
NOTE: This riser supports one single wide, or one double wide GPU option in
the secondary riser position
NOTE: Mixing of power supplies in the same system is not supported. All
power supplies must be of the same output and efficiency rating. If nonmatched power supplies are inserted, you will get errors, and operation will fail.
NOTE: Power Supply Kits should be added in Step 2 ("Configuration
Information - Factory Integrated Models") using the FIO Power Supply Kits.
The following option is for upgrade or change from original configuration or for
non-FIO orders.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supply offers 94% Efficiency with support for
Intelligent Power Discovery.*
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
649282-B21
752803-B21
728543-B21
656364-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
Note: For two double wide Graphics cards both double wide risers, and the
1200W PS are required.
HP DL380z NVIDIA Quadro K4000 PCIe FIO Graphics Adapter
NOTE: 1xK4000 is supported in the primary position with the riser 766993B21 or 752803-B21.
NOTE: 2xK4000 are supported in the secondary position with the riser
766994-B21 or 728543-B21.
NOTE: To support 3xK4000 both the primary riser (766993-B21 or 752803B21) and the secondary riser is required (766994-B21 or 728543-B21)
HP DL380z NVIDIA Quadro K5000 PCIe FIO Graphics Adapter
NOTE: This is supported in the 7766994-B21 or 28543-B21 riser in the
secondary position (second processor required) or in the 766993-B21 or
752803-B21, primary position. Maximum 2 supported with both risers.
HP DL380z NVIDIA Quadro K6000 PCIe FIO Graphics Adapter
NOTE: This is supported in the 766994-B21 or 728543-B21 riser in the
secondary position (second processor required) or in the 766993-B21 or
752803-B21, primary position. Maximum 2 supported with both risers.
HP DL380z NVIDIA GRID K2 Reverse Air Flow Dual GPU PCIe GPU FIO
Adapter
NOTE: This is supported in the 766994-B21 or 728543-B21 riser in the
secondary position (second processor required) or in the 766993-B21 or
752803-B21, primary position. Maximum 2 supported with both risers.
766996-B21
766997-B21
766998-B21
766995-B21
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
HP Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
C6N27A
Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates
C6N28ABE
Electronic License
NOTE: The Electronic software license is available in EMEA only.
HP Insight Control Server Provisioning Media Kit
BD883A
HP Insight Management Media Kit
C6N31A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
NOTE: The Electronic software license is available in EMEA only.
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single
Server License
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
NOTE: For additional license options please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_div/14276_div.html
NOTE: For more information, visit: http://www.hp.com/go/ilo
HP Security
HP Storage
Controllers
BD505A
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the system platform. For more
information about TPM, including a white paper, go to: www.hp.com/go/TPM.
NOTE: The TPM key is unique to every TPM deployed system and must be
retained. Misplacing or losing the key could result in data loss.
488069-B21
HP 2U Security Bezel Kit
666988-B21
SAS Controllers
The DL380z Gen8 Virtual Workstation comes configured with a P420 Smart
Array controller for the 8 SFF drive bay.
Optional Upgrades
HP 1GB P-series Smart Array Flash Backed Write Cache
HP 2GB P-series Smart Array Flash Backed Write Cache
HP SmartCache No Media 24x7 Technical Support 1 Svr License
HP SmartCache No Media 24x7 Technical Support Flexible License
HP SmartCache No Media 24x7 Technical Support Electronic License
631679-B21
631681-B21
D7S26A
D7S27A
D7S27AAE
HP Cable Options
HP Mini SAS Straight to Straight 37in Cable Assembly
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14228_div/14228_div.html
(Smart Array P420 Controller)
http://h18000.www1.hp.com/products/quickspecs/14532_div/14532_div.html
(SmartCache)
HP Power Cords
512485-B21
NOTE: HP DL380z Gen8 ships with an IEC-IEC power cord used for rack
662897-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
HP USB BFR with PVC Free UK Keyboard/Mouse Kit
HP USB BFR with PVC Free FR Keyboard/Mouse Kit
HP USB BFR with PVC Free ES Keyboard/Mouse Kit
HP USB BFR with PVC Free DE Keyboard/Mouse Kit
HP USB BFR with PVC Free JP Keyboard/Mouse Kit
HP USB BFR with PVC Free IT Keyboard/Mouse Kit
HP USB BFR with PVC Free CN Keyboard/Mouse Kit
HP USB BFR with PVC Free AE Keyboard/Mouse Kit
HP USB BFR with PVC Free RU Keyboard/Mouse Kit
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free PT Keyboard/Mouse Kit
HP USB BFR with PVC Free TR Keyboard/Mouse Kit
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit
HP USB BFR with PVC Free FI Keyboard/Mouse Kit
HP USB BFR with PVC Free SE Keyboard/Mouse Kit
HP USB BFR with PVC Free CH Keyboard/Mouse Kit
HP USB BFR with PVC Free KR Keyboard/Mouse Kit
HP USB BFR with PVC Free IN Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information (Worldwide):
http://h18000.www1.hp.com/products/quickspecs/13972_div/13972_div.html
Rail Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits.
Please take a moment to review the installation documentation that comes with
the system to help you with the installation of your Gen8 system.
NOTE: Rail kits are optional for DL380z Gen8. Customers have the option to
purchase their system without a rail kit.
NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which
allow for in-rack serviceability.
NOTE: The HP 2U Gen8 Cable Management Arm is not available when using
Friction Rails.
NOTE: To assist in the installation of the system into the rack an optional
installation tool is available by contacting your local services representative
(p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
672097-373
672097-B33
672097-133
672097-143
672097-223
672097-353
672097-103
672097-113
672097-KD3
672097-D63
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
Service
HP 3 year Next business day with Defective Media Retention DL380z Virtual
WS Foundation Care Service
HP 3 year 24x7 DL380z Virtual Workstation Foundation Care Service
HP 3 year 24x7 with Defective Media Retention DL380z Virtual Workstation
Foundation Care Service
HP 4 year Next business day DL380z Virtual Workstation Foundation Care
Service
HP 4 year Next business day with Defective Media Retention DL380z Virtual
WS Foundation Care Service
HP 4 year 24x7 DL380z Virtual Workstation Foundation Care Service
HP 4 year 24x7 with Defective Media Retention DL380z Virtual Workstation
Foundation Care Service
HP 5 year Next business day DL380z Virtual Workstation Foundation Care
Service
HP 5 year Next business day with Defective Media Retention DL380z Virtual
WS Foundation Care Service
HP 5 year 24x7 DL380z Virtual Workstation Foundation Care Service
HP 5 year 24x7 with Defective Media Retention DL380z Virtual Workstation
Foundation Care Service
HP Install DL380z Service
HP Startup DL380z Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
FIO HP DL380z parts
with non-FIO part
equivalents
The following parts listed detail the HP DL380z Gen8 Virtual Workstation
FIO only parts and the equivalent non-FIO part number:
NOTE: The equivalent non-FIO part numbers are useful for field
upgrade/replacement situations.
Processors
HP DL380z Gen8 Intel Xeon E5-2650v2 (2.6GHz/8-core/20MB/95W) with Fan
FIO Processor Kit
The equivalent non-FIO part number:
HP DL380p Gen8 Intel® Xeon® E5-2650v2 (2.6GHz/8-core/20MB/95W)
U5V47E
U5V48E
U5V49E
U5V50E
U5V51E
U5V52E
U5V53E
U5V54E
U5V55E
U5V56E
U5V57E
U5V58E
U5V59E
766983-B21
715218-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
Fan FIO Processor Kit
The equivalent non-FIO part number:
HP DL380p Gen8 Intel® Xeon® E5-2680v2 (2.8GHz/10-core/25MB/115W)
Processor Kit
HP DL380z Gen8 Intel Xeon E5-2670v2 (2.5GHz/10-core/25MB/115W) with
Fan FIO Processor Kit
The equivalent non-FIO part number:
HP DL380p Gen8 Intel® Xeon® E5-2670v2 (2.5GHz/10-core/25MB/115W)
Processor Kit
Memory
HP VWS 8GB (1x8GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered
CAS-13 FIO Memory
The equivalent non-FIO part number:
HP 8GB (1x8GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS13 Memory Kit
HP VWS 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866)
Registered CAS-13 FIO Memory
The equivalent non-FIO part number:
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered
CAS-13 Memory Kit
Networking
HP Ethernet 1Gb 4-port 366FLR FIO Adapter
The equivalent non-FIO part number:
HP Ethernet 1Gb 4-port 366FLR Adapter
HP VWS Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
The equivalent non-FIO part number:
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP VWS Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP FIO
Adapter
The equivalent non-FIO part number:
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter
Power Supply
HP DL380z 1200W Common Slot Platinum Plus Hot Plug FIO Power Supply
715215-B21
766987-B21
715216-B21
766988-B21
708639-B21
766989-B21
708641-B21
684217-B21
665240-B21
766990-B21
665243-B21
766991-B21
649282-B21
766992-B21
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Additional Options
GPUs
HP DL380z NVIDIA GRID K2 Reverse Air Flow PCIe GPU FIO Adapter
The equivalent non-FIO part number:
NVIDIA GRID K2 Reverse Air Flow Dual GPU PCIe Graphics Accelerator
HP DL380z NVIDIA Quadro K4000 PCIe FIO Graphics Adapter
The equivalent non-FIO part number:
NVIDIA Quadro K4000 PCI-E Graphics Adapter
HP DL380z NVIDIA Quadro K5000 PCIe FIO Graphics Adapter
The equivalent non-FIO part number:
NVIDIA Quadro K5000 PCI-E Graphics Adapter
HP DL380z NVIDIA Quadro K6000 PCIe FIO Graphics Adapter
The equivalent non-FIO part number:
NVIDIA Quadro K6000 PCI-E Graphics Adapter
Storage
HP VWS 100GB 6G SATA Mainstream Endurance88 SFF 2.5-in SC
Enterprise Mainstream 3yr Wty FIO SSD
The equivalent non-FIO part number:
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
HP VWS 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty FIO SSD
The equivalent non-FIO part number:
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise
Mainstream 3yr Wty Solid State Drive
766995-B21
753958-B21
766996-B21
730870-B21
766997-B21
730872-B21
766998-B21
730874-B21
774114-B21
691862-B21
774115-B21
691866-B21
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Memory
HP SmartMemory
New HP SmartMemory now provides additional protection for your HP Virtual Workstations. With HP Authentication it can
verify that you have true HP Qualified Memory in your HP DL380z Gen8 Virtual Workstation. With HP SmartMemory your
new HP DL380z Gen8 can take advantage of additional Proliant Gen8 enhancements in performance, durability and
future manageability support through HP Active Health System
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 v2 family processor socket contains four memory channels that support three DIMMs each
for a total of twelve (12) DIMMs per installed processor or a grand total of Twenty Four (24) DIMMs for the
system. Up to 16GB capacity DIMMs are supported for 384GB of max memory (for Best Speed (1866MHz) run
2 DIMMs per channel or 16 DIMM slots x 16GB per DIMM = 256GB).
Memory population guidelines
General Memory Population Rules and Guidelines:
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
A minimum of one DIMM is required per system.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed
processors and to load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel. Heaviest load
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Memory
http://www.hp.com/support.
Supported Memory Bandwidth for HP DL380z Gen8 Virtual Workstation with Intel® Xeon® E5-2600 v2 Series
Processor Family
Register DIMM
DIMM Type ->
Dual Rank
Single Rank
Dual Rank
DIMM Rank ->
(2R)
(1R)
(2R)
DIMM Capacity ->
8GB
8GB
16GB
DIMM Native Speed (MT/s) 1866
1866
1866
>
Voltage
Std
Std
Std
SLOTS THAT CAN BE POPULATED
24 slot systems
24
24
24
MAXIMUM CAPACITY (GB)*
24 slot systems
192
384
192
POPULATED DIMM SPEED (MT/s)
1 DIMM/Channel
1866
1866
1866
2 DIMM/Channel
1866
1866
1866
3 DIMM/Channel
1066
1066
1066
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual system platform qualification schedule
Memory Speed by E5-2600 v2 Processor Model
Processor Models
E5-2695 v2, E5-2680 v2, E5-2670 v2, E5-2650 v2
E5-2630 v2
Supported Memory Speeds
1866/1600MHz
1600MHz
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Memory
DIMM slot and configuration diagram
Population order; start with "A" first, "B" second, "C" third, etc.
When two processors are installed, install DIMMs in sequential
alphabetic order: CPU1-A, CPU2-A,CPU1-B,CPU2-B,CPU1-C, CP2-C
Chnl 3
Chnl 4
Chnl 2
Chnl 1
slot #
1
2
3
4
5
6
CPU1
7
8
9
10
11
12
24 DIMM SLOTS (12 per CPU node)
population order
slot #
C
1
G
2
K
3
D
4
H
5
L
6
J
F
B
I
E
A
7
8
9
10
11
12
population order
C
G
K
D
H
L
CPU2
J
F
B
I
E
A
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
DDR3 memory options part number decoder
Chnl 3
Chnl 4
Chnl 2
Chnl 1
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Memory
Following are memory options available from HP:
HP Memory
NOTE: Memory modules not contained in the latest version of this QuickSpec
for the HP DL380z Gen8 Virtual Workstation are not qualified or warranted. HP
SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen8. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies
and cannot be mixed within a server. The HP DL380z Gen8 Virtual
Workstation supports only RDIMM technology.
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2600 v2 series
Processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered CAS13 Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS13 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered
CAS-13 Memory Kit
HP VWS 8GB (1x8GB) Dual Rank x4 PC3-14900R (DDR3-1866) Registered
CAS-13 FIO Memory
HP VWS 16GB (1x16GB) Dual Rank x4 PC3-14900R (DDR3-1866)
Registered CAS-13 FIO Memory
708639-B21
731761-B21
708641-B21
766988-B21
766989-B21
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Storage
1-8
Maximum Storage Capacity - (with D2700, SAS/SATA HDD)
Internal
8.0TB (8 SFF HDDs x 1TB SATA SFF)
Eight SFF SAS hot plug drive bays
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Technical Specifications
System Unit
Dimensions (H x W x
D)
(with bezel)
Weight (approximate)
Input Requirements
(per power supply)
BTU Rating
Power Supply Output
(per power supply)
System Inlet
Temperature
SFF Drives: 3.44 x 17.54 x 27.50 in (8.73 x 44.55 x 69.85 cm)
Maximum
61.00 lb (27.66 kg)
Minimum
(one SFF hard drive,
power supply, and
processor installed,
ODD not installed)
Rated Line Voltage
41.0 lb (18.59 kg)
100 to 120 VAC
200 to 240 VAC
Rated Input Current
For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
Rated Input Frequency 50 to 60 Hz
Rated Input Power
For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
Maximum
For 1200 W Power Supply:
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)
Rated Steady-State
For 1200 W Power Supply:
Power
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
Maximum Peak Power For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Technical Specifications
Acoustic Noise
HP Smart Array P420i
Controller
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure
levels (LpAm) when the product is operating in a 23°C ambient
environment. Noise emissions were measured in accordance with ISO
7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA
109). The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound
levels.
NOTE: The Listed sound levels apply to configurations without
graphics. Additional options, including graphics, may result in
increased sound levels.
Performance
Idle
LWAd
4.1 B
LpAm
25 dBA
Operating
LWAd
5.0 B
LpAm
35 dBA
Emissions
Classification (EMC)
Class A
CISPR 22; EN55022; EN55024; FCC CFR
47, Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based
on sample (type) testing, evaluation, or assessment. This product or
family of products is eligible to bear the appropriate compliance logos
and statements.
NOTE: The Listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound
levels.
Dimensions
Disk Drive and
Embedded
6Gb/s SAS (Serial Attached SCSI)
FCC Rating
Normative Standards
QuickSpecs
HP DL380z Generation8 (Gen8) Virtual
Workstation
Technical Specifications
Host Memory
Addressing
RAID Support
HP Ethernet 1Gb 4port 366FLR Adapter
HP Flexible Network
Technology
Network Interface
Compatibility
64-bit, supporting greater than 4GB system memory space
RAID 6, 60 (Advanced Data Guarding)
RAID 5, 50 (Distributed Data Guarding)
NOTE: A minimum of 512 MB cache is required to enable RAID 5,
50, 6, 60
NOTE: HP Smart Array Advanced Pack (SAAP 2.0) is no longer
required to enable RAID 6 & 60 (Advanced Data Guarding). However,
controller must be in firmware version 4.68 (or later).
RAID 10 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
HP Flexible Network Technology consists of replaceable network
solutions to meet customer requirements now and in the future.
10Base-T/100Base-TX/1000Base-TX
EEE 802.3
IEEE 802.3ab
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ad
IEEE 802.1q
IEEE 802.3az
IEEE 802.1as
IEEE 1588
Data Transfer Method PCI Express, four lanes (x4)
Chipset
Intel Ethernet Controller I350
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half100 Mb/s
Duplex)
100Base-TX (Full200 Mb/s
Duplex)
1000Base-TX (Full2000Mb/s
Duplex)
Connector
Four RJ-45
Cable Support
10Base-T
Category 5e (CAT-5e) or better twisted-pair
HP DL380z Generation8 (Gen8) Virtual
Workstation
QuickSpecs
Technical Specifications
IEEE 802.3ae
IEEE 802.1Qau
Data Transfer Method PCI Express 2.0, eight lanes (x8)
Chipset
Intel 82599 Controller (generation 10)
Network Transfer Rate Full Duplex
20Gbps per port
Total Aggregate
40Gbps Full Duplex theoretical bandwidth
Connector
Two SFP+ cages allowing use of Direct Attach copper and SR fiber
optic modules
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hp.com/go/green. To recycle
your product, please go to: http://www.hp.com/go/green or contact
your nearest HP sales office. Products returned to HP will be
recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by
treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at:
http://www.hp.com/go/green. These instructions may be used by
recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable
for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.