QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Overview
HPE FlexFabric 20Gb 2-port 650M Adapter
The HPE FlexFabric 20Gb 2-port 650M adapter for ProLiant Gen9 server blades provides full-featured, high performance,
converged 20Gb Ethernet that accelerates IT services and increases data center efficiency across a broad range of I/O intensive
enterprise, cloud, and Telco workloads.
When connected to HPE Virtual Connect FlexFabric 20/40 F8 Modules, the HPE FlexFabric 650M adapter provides 20GbE
performance. It offers a rich set of offload technologies including overlay network tunneling and storage, increasing virtualization
performance and host efficiency. The HPE 650M is a dual-speed adapter that can also operate at 10GbE when connected to HPE
Virtual Connect Flex-10/10D Module or HPE 6125XLG Ethernet Switch.
The HPE 650M also supports RDMA over Converged Ethernet (RoCE) which increases host efficiency and lowers latency. RoCE is
supported with the HPE 6125XLG and other 10GbE switches.
Combining both the FlexibleLOM and Mezzanine adapters in a single BladeSystem Proliant server can provide up to 80Gbps of
converged bi-directional Ethernet bandwidth, helping to alleviate network bottlenecks.
HPE FlexFabric 20Gb 2-port 650M Adapter
Models
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: The HPE 650M requires a minimum of 2 GB of server memory.
NOTE: The HPE 650M supports linking at 10Gbps when not connected to a Flex-20 device.
700767-B21
Page 1
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Overview
Kit Contents
•
•
•
•
HPE FlexFabric 20Gb 2P 650M Adptr
Quick install card
Product warranty statement
Drivers, user guide, and utilities via: http://www.hp.com
Page 2
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Compatibility
HPE ProLiant
Server Support
•
•
•
•
Supported
Interconnect
Modules
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
HPE ProLiant BL460c Gen9
HPE ProLiant BL660c Gen9
HPE ProLiant BL460c Gen8
HPE ProLiant BL660c Gen8
HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem
HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem with TAA
HPE Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HPE Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
HPE Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem
HPE Virtual Connect Flex-10 Ethernet Module Enterprise Edition for BLc7000 Option
HPE 6127XLG Ethernet Blade Switch
HPE 6127XLG Ethernet Blade Switch with TAA
HPE 6125XLG Ethernet Blade Switch
HPE 6125XLG Ethernet Blade Switch with TAA
HPE 6125G/XG Ethernet Blade Switch
HPE 6125G/XG Ethernet Blade Switch with TAA
HPE 6125G Ethernet Blade Switch
HPE 6125G Ethernet Blade Switch with TAA
NOTE: Supported features with VC modules and Ethernet switches
Feature
VC FF20/40 F8
VC FF 10/24
VC Flex-10/10D VC Flex-10 6125/6127XLG

20G





10G





Tunnel Offload




FCoE

RoCE
HPE FlexFabric 650M Adapter also supports 1Gb or 10Gb connections with the following modules:
• HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
• HPE 1Gb Ethernet Pass-Thru Module for c-Class BladeSystem
• HPE Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
Page 3
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Standard Features
Product Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency (6125XLG
only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other
Concurrent Storage – concurrently supports NIC, FCoE, and iSCSI storage functions on the same port
(NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports HPE's Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications, mobile messaging, and social
media
User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per port, in increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e. 20 Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
Dual-port 20
Gigabit Ethernet
Throughput
(theoretical
bandwidth)
The HPE 650M adapter delivers 40,000 Mbps bi-directional Ethernet transfer rate per port (80 Gbps
aggregate bi-directional), providing the network performance needed to improve response times and alleviate
bottlenecks that impact the performance of next generation data centers. 20Gb Ethernet bandwidth is ideal
for high performance computing, database clusters and virtualization.
HPE Virtual
Connect FlexFabric
20Gb Ethernet
Module for the cClass BladeSystem
Evolve 20GbE at your own speed! When paired with the HPE Virtual Connect FlexFabric 20Gb Ethernet
Modules you can take advantage of four FlexNICs, which are PCI Physical Function devices that are OS/
Hypervisor independent. In addition, take advantage of new storage I/O functionality making it a fullConverged Network Adapter (CNA)
• Server ROM recognizes them as individual NICs
• Speeds can be set per NIC from 100Mbps to 20Gbs in 100Mbps increments
• Threefold increase in number of network connections per port
• Up to eight physical function NICs per adapter
• Ideal for virtualized server environments, especially for dedicated bandwidth application like virtual
machine migration from one physical server to another.
Jumbo Frames
The HPE 650M adapter supports Jumbo Frames, permitting up to a 9,200 byte (KB) transmission unit (MTU)
when running Ethernet I/O traffic. This is over 5X the size of a standard 1500-byte Ethernet frame. With
Jumbo Frames, networks can achieve higher throughput performance and lower CPU utilization. These
attributes are particularly useful for storage, database transfer and tape backup operations.
Page 4
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Standard Features
MSI-X
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load
balancing interrupts between CPUs/cores.
802.1p QoS Tagging IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level
across a QoS-aware network for improved traffic flow.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 650M to be
separated into multiple virtual NICs for added network segmentation and enhanced security and performance.
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same
VLAN domain also improves performance.
TCP/IP Stateless
Offloading
TCP/ IP, UDP checksum offload, Large Send Offload (LSO), TCP Segmentation Offload (TSO)are all features
which optimize host efficiency, leaving the CPU available for other duties.
RDMA (RoCE)
RoCE is an accelerated I/O delivery mechanism that allows data to be transferred directly from the user
memory of the source server to the user memory of the destination server bypassing the operating system
(OS) kernel. Because the RDMA data transfer is performed by the DMA engine on the adapter's network
processor the CPU is not used for the data movement, freeing it to perform other tasks such as hosting more
virtual workloads (increased VM density). RDMA also bypasses the host’s TCP/IP stack, in favor of upper layer
InfiniBand protocols implemented in the adapter's network processor. The bypass of the TCP/IP stack and the
removal of a data copy step reduce overall latency to deliver accelerated performance for applications such as
Microsoft Hyper-V Live Migration, Microsoft SQL and Microsoft SharePoint with SMB Direct.
Tunnel Offload
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN and
NVGRE. By offloading packet processing to adapters, customers can use overlay networking to increase VM
migration flexibility and network scale with minimal impact to performance. HPE Tunnel Offloading increases
I/O throughput, reduces CPU utilization, and lowers power consumption. Tunnel Offload supports VMware’s
VXLAN and Microsoft’s NVGRE solutions.
Single-Root I/O
Virtualization
Single-Root I/O Virtualization (SR-IOV) provides a mechanism to bypass the host system hypervisor in virtual
environments providing near metal performance and increasing server efficiency. SR-IOV provides a
mechanism to create multiple Virtual Functions (VFs) to share single PCIe resources. The device is capable of
SR-IOV, and requires Server BIOS support, controller firmware, and OS support.
Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
HPE Sea of Sensors Support for HPE's Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity 3D
heat - across the server. When temperatures get too high, sensors can kick on fans and make other
adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on at one
time to a new system where only one kicks on - the one in proximity of the area that started heating up - thus
reducing the amount of energy used for cooling.
Page 5
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Standard Features
iSCSI/FCoE Boot
The HPE FlexFabric 650M supports iSCSI INT 13 Boot and FCoE Boot from SAN.
Page 6
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Standard Features
Ease of Deployment and Management
PXE Boot Support The HPE 650M adapter supports the Preboot eXecution Environment (PXE) which allows the server to boot
over the network and download software residing in the network.
Compatible with
Type A and B
Mezzanine Slots
The HPE 650M adapter is compatible with Type A and B mezzanine slots for greater deployment versatility
Network Adapter
Teaming
The HPE 650M adapter’s support for NIC teaming helps IT administrators increase network fault tolerance
and improve workload balance. These capabilities optimize availability, improve performance and help reduce
costs.
Management
Support
The HPE 650M adapter can be administered from HPE Systems Insight Manager (SIM). The adapters can be
managed individually or in teams, providing SNMP based statistics for reporting purposes. The HPE 650M
adapter can also be managed by other applications with SNMP support.
Warranty
Hewlett Packard Enterprise branded hardware options qualified for BladeSystem c-Class and p-Class servers
are covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett
Packard Enterprise Authorized Channel Partners. The Hewlett Packard Enterprise branded hardware option
diagnostic support and repair is available for one year from date of purchase, or the length of the server they
are attached to, whichever is greater. Support for software and initial setup is available for 90 days from date
of purchase. Additional support may be covered under the warranty or available for an additional fee.
Enhancements to warranty services are available through HPE Care Pack services or customized service
agreements.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Page 7
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Service and Support
Service and Support HPE Technology Services
HPE Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HPE Care Pack Services
When you buy HPE Options, it's also a good time to think about what level of service you may need. HPE Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HPE Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industrystandard servers and software. You can choose the type and level of service that is most suitable for your
business needs. New to this portfolio is HPE Collaborative Support. If you are running business critical
environments, Hewlett Packard Enterprise offers Proactive Care or Critical Advantage. These services help
you deliver high levels of application availability through proactive service management and advanced
technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, Hewlett Packard Enterprise can work with you to tailor a service solution
for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended
Services
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an Hewlett Packard Enterprise Authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
http://h20195.www2.hp.com/v2/getpdf.aspx/5982-6547ENCA.pdf
OR
3-Year HPE 24x7 4 hour Response, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to HPE. If the problem is with HPE
HW, the representative will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged. In case, the issue is with HPE or supported third-party
software product and cannot be resolved by applying known fixes, Hewlett Packard Enterprise will contact the
third-party vendor and create a problem incident on your behalf.
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-7572ENN
Related Services
Related HPE Care Pack Services to enhance your HPE product experience
3-Year HPE 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
Page 8
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Service and Support
management and advanced technical response. A skilled Technical Manager will own your query or issue end
to end until resolved, delivering a single point of contact for you.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW
OR
3-Year HPE 6-hour Onsite Call-to-Repair, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to
return the hardware in operating condition within 6 hours of the initial service request to the HPE Global
Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HPE. In
case, the issue is with HPE or supported third-party software product and cannot be resolved by applying
known fixes, Hewlett Packard Enterprise will contact the third-party vendor and create a problem incident on
your behalf.
HPE Proactive Select Service
Provides a flexible way to purchase HPE best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12
months.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HPE Support Center Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with HPE experts, access support resources
or collaborate with peers. Learn more http://www.hp.com/go/hpsc
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty,
HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability.
Parts and materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part of this
service; standard warranty terms and conditions apply. Parts and components that have exceeded their
maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's
operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Warranty / Service For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified for the
Coverage
server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to
22" and tower UPS products; these items will be covered at the same service level and for the same coverage
Page 9
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Service and Support
period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been
exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by HPE due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not
failed. SSD/Flash Drives that are specified by HPE as consumable parts and/or that have exceeded maximum
supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the
technical data sheet are not eligible for the defective media retention service feature option.
For more
information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant or http://www.hp.com/services/bladesystem
Page 10
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Related Options
Additional c-Class FlexibleLOM Adapters
BladeSystem
HPE FlexFabric 20Gb 2-port 650FLB Adapter
Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
HP FlexFabric 10Gb 2-port 534FLB Adapter
HP Ethernet 10Gb 2-port 560FLB Adapter
HP FlexFabric 10Gb 2-port 554FLB Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Ethernet 1Gb 2-port 361FLB Adapter
Mezzanine Adapters
HP FlexFabric 20Gb 2-port 630M Adapter
HP FlexFabric 10Gb 2-port 534M Adapter
HP Ethernet 10Gb 2-port 560M Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Ethernet 1Gb 4-port 366M Adapter
HPE 10/20Gb
interconnects
HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem
HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem with TAA
HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HP Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
HP 6127XLG Ethernet Blade Switch
HP 6127XLG Ethernet Blade Switch for TAA
HP 6125XLG Ethernet Blade Switch
HP 6125XLG Ethernet Blade Switch with TAA
HP 6125G/XG Ethernet Blade Switch
HP 6125G/XG Ethernet Blade Switch with TAA
HP 6125G Ethernet Blade Switch
HP 6125G Ethernet Blade Switch with TAA
HP 6120XG Blade Switch
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
700762-B21
700065-B21
700741-B21
655639-B21
647586-B21
656590-B21
652500-B21
700076-B21
700748-B21
665246-B21
647590-B21
631884-B21
615729-B21
691367-B21
691367-B22
571956-B21
605865-B21
638526-B21
662048-B21
787635-B21
787635-B22
711307-B21
737230-B21
658250-B21
737226-B21
658247-B21
737220-B21
516733-B21
538113-B21
406740-B21
657787-B21
Page 11
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Technical Specifications
General
Specifications
Power and
Environmental
Specifications
Network processor Emulex XE-104
Data rate
Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bi-directional theoretical
bandwidth.
Onboard memory
900MB (distributed memory)
Bus type
PCI Express v3.0 (Gen 3) x8
Form factor
The HPE FlexFabric 650M is a Type A mezzanine adapter (works in Type A and Type
B mezzanine slots)
IEEE Compliance
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg, 802.1Qbb,
802.1Qaz, 802.3ap
Operating
Temperature
0°C to 55°C / 32°F to 131°F
Humidity
15% to 80% non-condensing
Power requirement 7.5W typical, 8.6W maximum
Emissions
classification
FCC Class A
Agency approvals
USA: FCC (CFR Title 47 Part 15) and UL 60950-1:2007
Canada: ICES-003:2012
Japan: VCCI:2012
Korea: MSIP - KN22, KN24
Australia: AS/NZS EN55022:2010 / CISPR22:2009+A1, EN55024:2010 / CISPR24:2010
European Union: EN55022:2010 (CISPR 22), EN55024:2010, and IEC60950-1:2007 2nd
Edition
Taiwan: BSMI - CNS 13438:2006
RoHS Compliance
6 of 6
Safety
UL Mark (USA and Canada)
CE Mark
EN 60590-1
Operating System Microsoft:
Support
Microsoft Windows Server 2008 SP2, R2 w/SP1 (x86 and x64)
Microsoft Windows Server 2012 and 2012 R2
Linux:
Red Hat Enterprise Linux (x86 and x64) 5.9, 5.10, 6.4, 6.5, 6.7, 7.0
Red Hat Enterprise (x64) 7.1, 7.2
SUSE Linux Enterprise Server 11, SP2 & SP3 (x86 & x64)
SUSE Linux Enterprise Server 11 SP4 (x64)
SUSE Linux Enterprise Server 12, SP1 (x64)
Solaris:
Solaris 10 U10
Solaris 11 x64
Page 12
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Technical Specifications
Virtualization:
VMware ESXi 5.0 U3, 5.1 U2
VMware vSphere 5.5, 6.0
NOTE:
1. For more operating system support & certification information, please
visit:http://h10018.www1.hp.com/wwsolutions/index.html .
2. Minimum Linux versions for FCoE support include RHEL 6.4 and SLES11SP3.
3. For RHEL 7.x, RHEL 7.2 is the minimum version for FCoE Boot from SAN support.
4. vSphere 5.5 is the minimum version of VMware for 20Gb support and SRIOV support.
5. vSphere 6.0 is the minimum version of VMware for uEFI FCoE Boot from SAN support.
6. Boot from SAN via the iSCSI offload path is not supported for VMware.
7. Networking only support for Solaris and Citrix XenServer.
8. FCoE is not supported on XenServer
9. UEFI is not supported for Xenserver
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest Hewlett Packard
Enterprise sales office. Products returned to Hewlett Packard Enterprise will be
recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hp.com/go/green. These instructions may be used by recyclers
and other WEEE treatment facilities as well as HPE OEM customers who integrate and
re-sell Hewlett Packard Enterprise equipment.
Page 13
QuickSpecs
HPE FlexFabric 20Gb 2-port 650M Adapter
Summary of Changes
Date
20-May-2016
02-Oct-2015
17-Dec-2014
Version History
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
Action
Changed
Changed
Changed
Added
30-Sep-2014
From Version 2 to 3
Changed
12-Sep-2014
From Version 1 to 2
Changed
Description of Change
Sections in QuickSpecs were updated.
Compatibility and Related Options sections were updated.
Compatibility section was updated
SKUs Added on HPE 10/20Gb interconnects:
737230-B21, 737226-B21, 658247-B21, 737220-B21, 406740B21.
Updates to Standard Features and Technical Specifications
sections.
Small changes made to Standard Features and Technical
Specifications sections.
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to
change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or
omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04347342 - 15050 - Worldwide - V6 - 20-May-2016
Page 14