EHS8000 Series Enclosure - Surveillance

PRODUCT SPECIFICATION
camera solutions
EHS8000 Series Enclosure
RUGGED, OUTDOOR, STAINLESS STEEL
Product Features
• High Reliability 316L Stainless Steel Construction
• Temperature Range from -40° to 50°C (-40° to 122°F)
• Meets IP66/IP68 and Type 6P Standards
• IK10 Mechanical Resistance, Vandal Resistance
• All Models Include Heater and Blower
• 24 VAC, Power Over Ethernet (PoE), and 230 VAC models
• Advanced Optics for Megapixel Camera Support
• Cable Entry Glands At the Rear of the Enclosure
• Integrated Cradle on Bottom of the Enclosure For Mounting or Used
In Conjunction With Included Wall Mount
• Easy Access for Servicing and Installation
• Sun Shroud and EMS8000 mount included
Pelco's EHS8000 Series rugged outdoor enclosure is designed to
protect camera and lens components in adverse environmental
conditions. The stainless steel construction increases reliability and
reduces the cost of maintenance.
All EHS8000 Series enclosures come standard with heater and
blower. Power input options include 24 VAC, 230 VAC and Power over
Ethernet while providing 24 VAC, 12 VDC, or POE power to the camera
depending on the model.
The EHS8000 Series enclosure is easily installed in the field and its
rugged construction and high-quality seals prevent impurities from
contaminating camera and lens components.
A sun shroud shields the enclosure from direct sunlight and reduces
the internal temperature by approximately 6° to 10°C (10° to 15°F).
The sun shroud and a wall mount bracket come standard with every
unit.
Constructed of corrosion-resistant 316L stainless steel to IK10 and
IP66 and IP68 ratings, the rugged EHS8000 Series features a
mounting cradle, sled and track assembly for camera mounting for
easy access to the camera and lens. Power, video, and lens control
cables are routed through environmentally sealed gland fittings on
the rear of the enclosure.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4048 / New 12-13-17
TECHNICAL SPECIFICATIONS
MECHANICAL
Camera Mounting
Camera and Lens Size
Viewing Window
Viewing Area
Cable Entry
Maximum Cable Diameters
Cable Entry Holes
Fastening for Front and Rear
of the Enclosure
GENERAL
Internal camera sled with adjustable
positioning
Accepts camera and lens combinations up to
22.86 x 10.16 x 7.62 cm (9-in L x 4-in W x 3.5in H)
High optic grade soda lime glass, 4K ready
3.00-inch diameter
0.45 in (11.4 mm)
2 x M20 compression glands
M5 screws with Torx head
CERTIFICATIONS*
•
•
•
•
•
•
CE
ICES-003 (Class A)
UL/cUL Listed
UL/IEC 60950-22 (TBD)
Meets Type 6P, IP66, and IP68 standards
IK10 Mechanical Impact Resistance (Mechanical enclosure only, not the
front window)
• KCC
• RCM
Construction
Finish
Environment
-40° to 50° C (-40° to 122°F)
Unit Length
Base
Overall
Weight
EHS8000-2-H
EHS8000-3-H
EHS8000-P-H
EMS8000
EPS8000
55.0 cm (21.65 in)
65.1 cm (25.63 in)
Unit
13.1 kg (28.9 lb
13.23 kg (29.2 lb)
13.23 kg (29.2 lb)
2.03 kg (4.5 lb)
0.85 kg (1.9 lb)
Shipping
15.1 kg (33.3 lb)
15.23 kg (33.6 lb)
15.23 kg (33.6 lb)
2.4 kg (5.3 lb)
1.0 kg (2.2 lb)
RECOMMENDED CAMERAS
Sarix® Enhanced Next Generation Series
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
ELECTRICAL
Input Power
Input Voltage
HPoE
24 VAC
316L stainless steel
Electropolished
Indoor/environmental ambient temperature
24 VAC, HPOE, or 230 VAC
.
M8
Preliminary IEEE802.3BT
±10%, up to 40W (without camera), up to
53W (with 13W camera), 24 VAC output to
camera
±10%, up to 40W (without camera), up to
53W (with 13W camera), 12 VDC output to
camera
230 VAC
Maximum Power Output
to Camera
2.54
(1.00)
13W
5.08
(2.00)
EHS8000 ENCLOSURE WITH EMS8000 WALL MOUNT
20.26
(7.98)
55.00
(21.65)
39.79
(15.66)
8.25
(3.25)
41.84
(16.47)
65.11
(25.63)
TECHNICAL SPECIFICATIONS
MODELS
Heater / Blower
24 VAC
EHS8000-2-H
•
•
EHS8000-3-H
•
EHS8000-P-H
•
230 VAC w/12
VDC to camera
Model Number
HPOE input with
POE output to
camera
•
•
OPTIONAL ACCESSORIES
OPTIONAL MOUNTS
POWER SUPPLIES
Indoor/Outdoor 24 VAC
EMS8000
EPS8000
WCS1-4
WCS4-20B
MCS4-2B
MCS8-5B
MCS16-10
MCS16-10SB
MCS16-20
MCS16-20SB
Indoor PoE
POE90U1UP
POE90U1UP-US
POE90U1UP-EUK
Wall mount
Pole mount bracket
Outdoor, 1 output, 4 A (100 VA) capacity
Outdoor, 4 outputs, 20 A (480 VA) capacity
Indoor, 4 outputs, 2 A (48 VA) capacity
Indoor, 8 outputs, 5 A (120 VA) capacity
Indoor, 16 outputs, 10 A (240 VA) capacity
Same as above except with circuit breakers
Indoor, 16 outputs, 20 A (480 VA) capacity
Same as above except with circuit breakers
EPS8000 Pole Mount Bracket
HPoE, IEEE802.3BT, midspan injector (no
power cord)
HPoE, IEEE802.3BT, midspan injector (US
power cord)
HPoE, IEEE802.3BT, midspan injector (EU/UK
power cord)
Note: The “EUK“ or “US“ suffix indicates a European or US power cord.
EMS8000 Wall Mount
7.92
(3.12)
13.97
(5.50)
10.75
(4.23)
13.97
(5.50)
17.78
(7.00)
19.11
(7.52)
17.78
(7.00)
5.28
(2.00)
9.35
(3.68)
Ø 2.72
(1.07)
5.28
(2.00)
8.25
(3.25)
41.84
(16.47)
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication
are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc.
All other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2017, Pelco, Inc. All rights reserved.