HL-2489 EVT4 Brochure.indd

EVT4 Series
LED & Fluorescent Technology
HOLOPHANE®
EVT4 Series
THE EVT4 SERIES’
SLEEK, IMPACT-RESISTANT
HOUSING IS IDEAL FOR A WIDE-RANGE OF
INDUSTRIAL APPLICATIONS.
FLUORESCENT AND
EVT4
LED
AVAILABLE
IN
TECHNOLOGY, THE
IS ENERGY-EFFICIENT AND AVAILABLE
WITH MANY CONTROLS OPTIONS.
IT
IS
IP65
RATED AND SUITABLE FOR WET LOCATIONS.
2
HOLOPHANE®
| LED & Fluorescent |
EVT4 Series
To meet these 21st century needs,
it is imperative that the LED system
is properly engineered for thermal
and performance considerations.
Holophane has exhausted many
hours of research and development
to ensure reliability
through innovative
integration of this
exciting technology.
| Indoor Lighting
EVT4 LED and EVT4 Fluorescent
Features and Benefits
Typical Applications
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Energy efficient LED or fluorescent technology
Multiple mounting options
Controls enabled
Vandal-resistant polycarbonate construction
Wet location listed when mounted to or
suspended from ceiling
Damp location listed when mounted to wall
HOLOPHANE®
Cold Storage Facilities (LED)
Parking Garages
Industrial Spaces
Transit Stations
Stairwells
Canopies
Locker Rooms
Hospitals
| LED & Fluorescent |
EVT4 Series
3
HOLOPHANE®
Easy Installation
The EVT4 fixture was designed with the contractor in mind. With its multiple mounting options, this fixture provides easy installation in
both relight and new construction applications. Whether the application requires mounting to an existing junction box, to the surface,
or by chain or conduit, we have a solution for you. Captive-latch design and smooth exterior allow for easy access and maintenance.
Quick Mount
Junction Box
Surface Mount (Standard Mounting Bracket)
Conduit Entry
Chain Mount
Tilt for Ramp Applications
LOCK NUT
O-RING
FITTING
4
HOLOPHANE®
| LED & Fluorescent |
EVT4 Series
| Indoor Lighting
Relighting & Revitalizing
Using EVT4 fixtures for relight opportunities can
dramatically revitalize the look of a space. Other benefits
include enhanced lighting quality and distribution, as
well as reduced energy and maintenance costs. In fact,
energy consumption can be reduced by as much as
30-50% leading to a payback of less than two years
depending on original lamp source replaced. Ideal
spaces for relighting include areas with long burn hours
or where the current fixtures use older-style lamps and
ballasts. The EVT4 fixture offers several control solutions
for maximizing energy efficiency without sacrificing light
PHOTO SENSOR
quality. EVT4 is simply the smart lighting choice for sustainability,
energy savings and reducing costs. California Title 24 compliant.
Traditionally, parking garages are illuminated 100% of the time
but are only occupied 20% of the time. By specifying additional
options such as a photo cell or occupancy sensor, you will save
energy and extend the life of the fixture.
OCCUPANCY SENSOR
• Energy-saving solution for
daylight harvesting
• Cold weather, wet location listed and
IP65 rated
• Wet location listed
• Available with 360° lenses for mounting heights
up to 8’ and 20’
• Mounted on end of fixture for
optimal performance
• 15-minute time delay after last motion
is detected
Note: EVT4 LED also available with: 0-10V Dimming, 100-50% power control, Bi-Level Control, ROAM wireless monitoring system
Rugged Construction
The injection-molded, vandal-resistant housing of the
EVT4 fixture is UV-stabilized frosted polycarbonate
with a continuous poured-in-place, closed-cell gasket.
Similarly, the injection-molded lens is UV-stabilized and
impact-resistant. The lens, featuring a decorative rib
detail, and the tamper-resistant latches are made of a
clear, transparent polycarbonate material.
Holophane Lighting offers the following warranty for rough-service
fixtures: Rough-service products by Holophane Lighting are engineered
to with stand extreme physical assault. When properly installed per
instructions for maximum vandal resistance, any rough-service
lighting fixture utilizing a polycarbonate lens and/or polycarbonate
housing enclosure that is rendered inoperable as a result of physical
abuse, will be repaired or replaced without charge for the life of
the product.
The channel and channel cover are constructed from
20-gauge steel. The fixture design allows for 10 -12%
uplight to minimize the “cavern effect” while featuring
tool-less ballast and wiring access for ease
of maintenance.
HOLOPHANE®
| LED & Fluorescent |
EVT4 Series
5
HOLOPHANE®
EVT4 LED
Injection-molded,
vandal resistant housing
Impact-resistant
polycarbonate lens
Utilizes high-efficiency LEDs
Optical Control Films Direct Light:
general lighting environments
Asymmetric (ASYM)
Provides broad light distribution which is ideal for lower
mounting heights
6
HOLOPHANE®
| LED & Fluorescent |
EVT4 Series
Symmetric (SYM)
Well suited for general lighting environments
| Indoor Lighting
EVT4 Fluorescent
Precision-formed,
high-performance segmented optics
Injection-molded,
vandal resistant housing
Prismatic Light Control Film
Tool-less ballast
and wiring access
Lighting Control Options:
Prismatic light control film
Striped light control film
EVT4 with houseside shield option
customize light & reduce glare
Opaque light control film
EVT4 with uplight shield option
HOLOPHANE®
Houseside shield
eliminates light trespass
EVT4 without houseside shield or
uplight shield options
| LED & Fluorescent |
EVT4 Series
7
HOLOPHANE®
Ordering Information
Dimensional Details
10.5 mm
(4-1/8”)
10.5 mm
(4-1/8”)
21 mm
(8-1/4”)
139.1 mm
(54-3/4”)
EVT4 LED
Maximum Weight: 5.9 kg. (13.5 lbs.)
Performance Specifications
EVT4 LED
Intended Use
Ideal for use in applications where smart, energy-efficient fixtures are desired.
Typical applications include parking garage, canopy, transportation, school, hospital,
cold storage and exterior retail environments where moisture or dust is a concern.
Polycarbonate enclosure protects fixture while remaining easy to service and clean.
Construction
UV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing
with continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and
channel cover. Aluminum sheet metal board plate for thermal conduction and
support. Fixture design allows for uplight.
Optics
UV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate
lens with aesthetic rib detail (.080” thick). Asymmetric (ASY) optical control film
provides broad light distribution (ideal for lower mounting heights). Symmetric (SYM)
optical control film is well suited for general lighting environments. Clear transparent,
tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws
included). Stainless steel latches also available.
Electrical
Utilizes high-efficiency LEDs mounted to core circuit boards. 4100 Kelvin
temperature standard, with additional color temperatures also available. High
efficiency driver operates 100V through 277V, 50-60HZ. Integral surge protection
standard and tested in accordance with IEEE/ANSI C62.41.2 to Category C Low.
Includes a temperature-sensing component that will limit the temperature of the
LEDs in case of excessive ambient temperatures or mis-application. One driver used
for 39W and 59W; two drivers used for 79W and 114W. Bi-level control and low
(0-10) voltage dimming standard (see options for prewiring). L93 at 60,000 hours
(350mA) and L85 at 60,000 hours (525mA).
Installation
Stainless steel surface spring-mounting brackets standard (2 included) allows for
ceiling or suspended mount. A variety of stainless steel mounting options also
available: J-box mounting and mounting brackets for suspension with aircraft cable
(cable not included). Optional stainless steel V-hooks available for chain hanging
(chain not included). Surface conduit entry on each end and on top. For horizontal
and vertical mounting on a wall, application must be under a covered ceiling and
QMB option recommended. 1/2” - 3/4” KO.
Listings
CSA Certified to UL and C-UL standards for ambient temperatures ranging from
-20°C to 40°C. NOM Certified (see Options). EVT4 LED is wet location listed for
covered ceiling applications. Product will be rated for damp location only when
wall mounted. IP65 rated.
Meets Designlights™ Consortium requirements for Fuel Pump Canopy (standard).
Meets Designlights™ Consortium requirements for Parking Garage Luminaires
(see Options).
See “LED Specification Matrix” below for ambient temperature listings.
8
HOLOPHANE®
| LED & Fluorescent |
EVT4 Series
Warranty
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Rough Service products by Holophane Lighting are engineered to withstand
extreme physical assault. When properly installed per instructions for maximum
vandal resistance, any rough service polycarbonate lens and/or polycarbonate
housing enclosure that is rendered inoperable as a result of physical abuse,
will be repaired or replaced without charge for the life of the product.
LED SPECIFICATION MATRIX
System Watts
Delivered Lumens
(Nominal)
Ambient Temperature °C
39
3000
40
59
4100
40
79
6000
40
114
8000
25
| Indoor Lighting
Preferred Selections:
Most Frequently Ordered Catalog Numbers
EVT4
39LED
27
ASY
277
SF
1
2
3
4
5
6
LUMINAIRE
WATTAGE
COLOR TEMP.
LIGHT CONTROL FILM
VOLTAGE
OPTIONS
EVT4
39LED
59LED
79LED
114LED
BLANK
27
35
57
AMB
ASY
SYM
MVOLT
120
277
347
480
SF
WLF
WLFIN
WLFEND
Catalog Numbers for Entire Product Offering
(Pricing and lead times may be affected)
STEP 1: LUMINAIRE
EVT4
EVT4 LED
STEP 2: WATTAGE
39LED 39 watts
59LED 59 watts
79LED 79 watts
114LED 114 watts
STEP 3: COLOR TEMPERATURE1
BLANK
27
35
57
AMB
4100K (CRI 65)
2700K (CRI 80)
3500K (CRI 80)
5700K (CRI 70)
Amber LED’s
STEP 4: LIGHT CONTROL FILM
ASY
SYM
Asymmetric beam
Symmetric beam
STEP 5: VOLTAGE
BLANK
120
277
3472
4802
MVOLT
120V
277V
347V
480V
®
STEP 6: OPTIONS3
STEP 7: ACCESSORIES
SF4
BSL7224
Single fuse
Bodine® emergency LED
battery pack for 0°C and up
BSL722C4 Bodine® emergency LED
battery pack for -20°C and up
WLF5
Wet location fitting
(two outboard, top)
5
WLFIN
Wet location fitting
(two inboard, top)
WLFEND5 Wet location fitting (one end)
WLFEND25,6 Wet location fitting (both ends)
CS89
6' white cord, 16/3,
no plug, wet location
CS88
6’ Brad Harrison, 16/3 cord
and straight blade plug set
CS8812
12’ Brad Harrison, 16/3 cord
and straight blade plug set
STSL
Stainless steel tamper
resistant latches
QMB
Quick-mount ceiling bracket
CMB
Chain-mount
suspension bracket
JSB
Junction box snap-bracket
BLC2
80% lumen maintenance
DIM
Pre-wired for 0-10V low
voltage dimming (100-10%)
DIM27
Line-voltage power
control (100-50%)
L/SP
Less surge protector
MSI__4,8
Wet location motion
sensor and bracket
PE4
Photoelectric cell (button type)
DLC4
Designlights™ Consortium
qualified for Parking
Garage Luminaires
NOM
NOM Certified
HOLOPHANE®
VAPSMB
VAPQMB
VAPCMB
VAPJSB
VAPPMP
VAPPMK
VAPPMPB
HC368,11
RK1 T20BIT
Surface spring mount bracket
Quick-mount ceiling bracket
Chain-mount bracket
Junction box snap bracket
Pendant monopoint
Pendant monopoint kit
Pendant monopoint bracket
Wire hook and 36' chain set
Hex base driver bit,
Torx T20. Tamper resistant
screws with center reject pin
RK1 T20DRV Torx T20 screwdriver for use
with tamper resistant screws
with center reject pin
___________________________________________
1
The CCT value providedis of lamp source and
actual CCT will vary upon levels.
2
Non-DLC compliant.
3
For additional options, consult factory.
4
Must specify voltage.
5
5/8" long NPT threaded hub.
6
Not available with cord sensor or photocell options.
7
Available with 79LED and 114LED only.
8
For mounting up to 8', specify MS18; for
mounting up to 20', specify MS120.
9
Not applicable with ASY or SYM optical film.
10
Requires CMB (chain mount bracket) option.
11
For stainless steel, specify STS
(example: HC36 STS).
12
4100K and 5700K are LED CCTs.
| LED & Fluorescent |
EVT4 Series
9
HOLOPHANE®
Ordering Information
Dimensional Details
10.5 mm
(4-1/8”)
21 mm
(8-1/4”)
139.1 mm
(54-3/4”)
EVT4 Fluorescent
Maximum Weight: 5.9 kg. (13.5 lbs.)
Performance Specifications
EVT4 Fluorescent
Intended Use
Ideal for use in applications where smart, energy-efficient fixtures are desired.
Typical applications include, parking garage, canopy, transportation, school, hospital
and exterior retail environments where moisture or dust is a concern. Polycarbonate
enclosure protects fixture while remaining easy to service
and clean.
Construction
UV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing with
continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and channel
cover. Tool-less ballast and wiring access. Fixture design allows for
10-12% uplight.
Optics
UV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate
lens with aesthetic rib detail (.080” thick). Clear transparent, tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws included). Stainless
steel latches also available. Reflectors are precision-formed, highperformance, segmented optics utilizing premium specular aluminum and optimized
for both 1- and 2-lamp configurations. Provides 95% reflectivity
and warranted for 25 years.
Electrical
Ballasts: Thermally protected, resetting, Class P, HPF, Sound Rating A+. 90°C
rated Advance Cool Running™ ballast standard for T5HO. T8 ballast starting temperature is -18°C (0°F) and T5HO starting temperature is -29°C (-20°F).
Lamps: 4100K lamps standard. Secured with rotary locking lampholders for
ease of re-lamping and to minimize disconnection due to vibration or
incidental contact.
Installation
Stainless steel surface spring-mounting brackets standard (2 included). A variety
of stainless steel mounting options available: surface conduit entry on each end and
on top, j-box mounting and mounting brackets for suspension with aircraft cable
(cable not included). Optional stainless steel V-hooks available for chain hanging
(chain not included). For horizontal mounting on a wall, application
must be under a covered ceiling and QMB option recommended. 1/2” - 3/4” KO.
Listings
CSA Certified to UL and C-UL standards. NOM Certified (see Options). CSA
Listed for ambient operation up to 40°C (104°F). EVT4 is wet-location listed for
covered-ceiling applications. Product will be rated for damp location when wall
mounted. IP65 rated.
Warranty
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
10
HOLOPHANE®
| LED & Fluorescent |
10.5 mm
(4-1/8”)
EVT4 Series
| Indoor Lighting
Preferred Selections:
Most Frequently Ordered Catalog Numbers
EVT4
BLANK
120
2/1
LP830
1
128T5L BLANK
2
3
4
5
6
7
GLR
8
LUMINAIRE
LAMP TYPE
SHIELDING
DISTRIBUTION
VOLTAGE
BALLAST CONF.
LAMP INSTALLED
OPTIONS
EVT4
128T5L
228T5L
132L
232L
BLANK
BLANK
WD
BLANK
120
HVOLT
BLANK
2/1
GEB80S
GEB90S
BLANK
LP830
LP835
LP850
GLR
EL14DW
MSI___
MSI___D
Catalog Numbers for Entire Product Offering
(Pricing and lead times may be affected)
STEP 1: LUMINAIRE
EVT4
EVT4 Fluorescent
STEP 2: LAMP TYPE1
T5HO
154L
254L
1 lamp, 54W
2 lamps, 54W
T5 LAMPS
128T5L 1 lamp, 28W
228T5L 2 lamps, 28W
T8 LAMPS
132L
1 lamp, 32W
232L
2 lamps, 32W
STEP 3: SHIELDING
BLANK Clear Polycarbonate
STEP 4: DISTRIBUTION
WHITE BALLAST COVER
BLANK General Distribution
SPECULAR REFLECTOR
WD
Wide Distribution
STEP 5: VOLTAGE
BLANK MVOLT 120V-277V
120
120V
HVOLT2 347V-480V
®
STEP 6: BALLAST CONFIGURATIONS
BLANK
2/1
One ballast
Two 1-lamp ballast
T5/T5HO
BLANK
1.0 BF, PRS
GEB80S3,4 .80 BF, step dimming
(100%-50%)
GEB90S5 .90 BF, PRS, step dimming
T8
BLANK
GEB10IS
GEB10ISL
GEB10PS
BSNP3,6
1.18 BF, IS
.88 BF, IS
.76 BF, IS
1.00 BF, PS
.87 BF, PS step dimming
STEP 7: LAMP INSTALLED
BLANK
LP830
LP835
LP850
STEP 8: OPTIONS
CMB13
JSB13
CS89
CS88
CS88L12
HS
UPS
LCF113
LCF213
LCF313
STSL
NOM
Chain-mount bracket
Junction box snap bracket
6’ white cord, 16/3, no plug,
wet location
6’ Brad Harrison 16/3 cord and
straight blade plug set
12’ Brad Harrison 16/3 cord and
straight blade plug set
Houseside shield
Uplight shield
Prismatic light control film
Opaque light control film
Striped light control film
Stainless steel latches
NOM certified
STEP 8: ACCESSORIES
85 CRI, 841
85 CRI, 830
85 CRI, 835
85 CRI, 850
STEP 8: OPTIONS
GLR
EL14DW9
Internal fast-blow fusing
Emergency lighting
(1400 lumens)
MSI__9.10,11 Wet location motion sensor
with bracket, wired on/off
MSI__D9,10,16 Wet location motion sensor
with bracket wired for
HI/WW dimming
PE9,12
Photoelectric cell (button type)
RIF1
Radio interference filter,
one per fixture
B50CW6,9 Cold weather battery pack
WLF
Wet location fitting
(two outboard, top)
WLFEND Wet location fitting (one end)
WLFEND2 Wet location fittings (both ends)
WLFIN
Wet location fitting
(two inboard, top)
QMB13
Quick-mount ceiling bracket
HOLOPHANE®
VAPSMB
VAPQMB
VAPCMB
VAPJSB
VAPPMP
VAPPMK
VAPPMPB
HC3614,15
RK1 T20BIT
Surface spring mount bracket
Quick-mount ceiling bracket
Chain-mount bracket
Junction box snap bracket
Pendant monopoint
Pendant monopoint kit
Pendant monopoint bracket
Wire hook and 36’ chain set
Hex base driver bit,
Torx T20. Tamper resistant
screws with center reject pin
RK1 T20DRV Torx T20 screwdriver for use
with tamper resistant screws
with center reject pin
___________________________________________
1
To order fixtures WITHOUT lamps, remove the “L”
from the description (example:EVT4 132).
2
Not available with 28T5 or 1-lamp 32T8.
3
Available with 2-lamp unit only.
4
Available with 54T5H0.
5
Available with 28T5 only.
6
Available with 32T8 only.
7
Alternate lamp color need only be specified if
pre-installed lamps are provided.
8
For additional options, consult factory.
9
Must specify voltage.
10
GEB10PS recommended.
11
For mounting up to 8', specify MS18; for
mounting up to 20', specify MS120.
12
Not available with 480V.
13
Accessories may be ordered as a separate
catalog numbers.
14
For stainless steel, specify STS
(example: HC36 STS).
15
Requires chain mount bracket (CMB option).
16
For use with step dimming ballast.
| LED & Fluorescent |
EVT4 Series
11
Acuity Brands Lighting, Inc.
Holophane Headquarters, 3825 Columbus Road,
Granville, OH 43023
Acuity Brands Lighting Canada, Inc.,
35B Minthorn Blvd., Markham, ON., L3T 7N5
Holophane Europe Limited, Bond Ave.,
Milton Keynes MK1 1JG, England
Holophane, S.A. de C.V., Km. 31 Carretera
Mexico-Cuautitlan 54900 Tultitlan Edo. De
Mexico
Contact your local Holophane factory sales
representative for application assistance, and
computer-aided design and cost studies. For
information on other Holophane products and
systems, call the Inside Sales Service Department
at 866-759-1577. In Canada call 905-886-8967
or fax 905-886-7973.
Warranty Five-year limited warranty.
Full warranty terms located at
www.acuitybrands.com/CustomerResources/
Terms_and_conditions.aspx
The eco savings in the production of this brochure:
2 trees preserved for the future
4 lbs waterborne waste not created
659 gallons wastewater flow saved
73 lbs solid waste not generated
144 lbs net greenhouse gases prevented
Visit our web site at www.holophane.com
Product specifications may change without notice.
Please contact your local Holophane factory sales
representative for the latest product information.
HL-2489 11/12 ©2012 Acuity Brands Lighting, Inc. All Rights Reserved.
1,098,965 BTUs energy not consumed
Data obtained from the Mohawk Paper environmental calculator
Printed in USA