PT-572+-HDMI over Twisted Pair Receiver

kramerelectronics.com
http://www.kramerelectronics.com/products/model_print_page.asp?
i=2100&pfstyle=wp&country=1
PT-572+-HDMI over Twisted Pair Receiver
The PT-572+ is a twisted pair receiver for HDMI
signals. The PT-571 converts an HDMI signal to
a single twisted pair signal and the PT-572+
converts the twisted pair signal back to an
HDMI signal.
PT-572+ FEATURES
M ax. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP Compliant.
HDM I Support - HDMI (V.1.4 with 3D, Deep Color, x.v.Color™, HDMI Uncompressed Audio Channels,
Dolby TrueHD, DTS-HD).
3D Pass-Through.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control
and communication to signals that run over twisted pair cables. We strongly recommend using Kramer
DGKat™ cables designed specifically for optimum performance.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524
cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up
to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable.
Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use
Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range
depends on the signal resolution, graphics card and display used. The distance using non-Kramer
CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both
ends of the shield are soldered to ground.
EDID PassThru - Passes EDID/HDCP signals from source to display.
Status LED - Lights red when receiving power only, orange when output and power are attached,
and yellow when both an active input and output are attached.
Power Connect™ System - A single connection to the transmitter or the receiver powers the system
when the devices are within 270ft (90m) of each other.
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with
the optional RK-4PT rack adapter.
PT-572+ TECHNICAL SPECIFICATIONS
INPUTS:1 RJ-45 connector.
OUTPUTS:1 HDMI connector.
BANDWIDTH:Supports up to 1.65Gbps bandwidth per graphic channel.
COM PLIANCE WITH HDM I STANDARD:Supports HDMI and HDCP.
POWER SOURCE:12V DC, 250mA.
DIM ENSIONS:6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
WEIGHT:0.14kg (0.3lbs).
ACCESSORIES:Power supply.
OPTIONS:RK-4PT 19” rack adapter.