Product Overview
HRS-M1 SATA SSD
SMART High Reliability Solutions™ HRS-M1 2.5” SATA solid
state drives (SSDs) combine high performance, superior
Features
reliability and data security into a single ruggedized design,
 High Random and Sequential I/O Performance
making it the ideal storage solution for many demanding
defense, industrial automation, transportation, medical and
telecommunication applications.
Utilizing a SATA 6Gb interface, HRS-M1 SSDs deliver
550MB/s sequential read and 530MB/s sequential write
speeds, up to 70,000 random read IOPS and up to 50,000
random write IOPS. Capacities of 60, 120, 240, 480, 960, and
1920GB are available using cost effective multi-level cell
(MLC) NAND Flash.
SMART’s HRS-M1 SSDs are designed to meet the needs of
cost-sensitive applications where temperature tolerances
are as important as high performance and reliability. A
robust set of diagnostic tools is provided through SSDspecific S.M.A.R.T attributes which can be used to monitor
the health of the drive.
Data Security
HRS-M1 SSDs automatically protect all data written with
AES 256-bit encryption. Also included is the Security Erase
feature per the ATA-8 specification whereby the encryption
key will be deleted in less than 1 second which secures all
data as it can longer be decrypted.
Write Termination
When the SSD has too many bad blocks, the HRS-M1 goes
into Write Termination mode, whereby no more data can
be written.
 Cost-Effective MLC Flash
 Ruggedized Enclosure (Shock, Vibration)
 Write Termination
 Thermal Sensor
 Static and Dynamic Wear Leveling
 Firmware Updatable
 Low Power Management
 Ideal for High and Low Temperature Applications
 S.M.A.R.T. Attributes to Monitor Drive Health
 AES 256-bit Encryption to automatically Protect
all Data Written to the Drive
HRS-M1 SATA Product Family
Capacity
Sustained
Performance
Random
Performance
60, 120, 240, 480,
960, 1920GB
525MB/s Read
500MB/s Write
70,000 IOPS Read
50,000 IOPS Write
HRS-M1 SATA Specifications
HRS-M1 SATA Ordering Information
2.5” SATA
Performance
Burst
Part Number
Capacity (GB)
HR6A2X0060EI001
60
600MB/s
HR6A2X0120EI001
120
525MB/s Read, 500MB/s Write1
HR6A2X0240EI001
240
Random
IOPS Read 70,0001
IOPS Write 50,0001
HR6A2X0480EI001
480
Interface
SATA 6 Gb/s
Sequential
Capacity
MLC
HR6A2X0960EI001
960
HR6A2X1920EI001
1920
60, 120, 240, 480, 960, 1920GB
Reliability
MTBF
2M hours
Error Correction
120 bit ECC plus polarity
Power Loss Protection
Fast Flush of Cached Data
Endurance
Warranty
4114 TB Written2
1 Year
Data Security
Encryption
AES 256-bit
Elimination
ATA-8 Security Erase
Power
Input Voltage
Idle (typ)
Active Read/Write (typ)
5 V +/- 5%
365 mW
2150 / 4300 mW
Environmental
Operating Temperature
-40°C to 85°C
Storage Temperature
-40°C to 85°C
Operating Shock, Acceleration Force
Operating Vibration, Freq/Displacement
Operating Vibration, Freq/Acceleration
Operating Vibration Orientation
Relative Humidity
1500G
20Hz~80Hz/1.52mm
80Hz/20G
X, Y, Z axis/60 min for each
95% under 55°C (operational)
Mechanical
Length
100.00 mm
Width
69.85 mm
Height
9.5 mm
(1) Based on 480GB Drive
(2) Based on 1920GB Drive
Headquarters: T: (+1) 800.956.7627 • T: (+1) 510.623.1231 • F: (+1) 510.623.1434 • E: info@smarth.com
Customer Service: T: (+1) 510.624.5379 • F: (+1) 480.926.5579 • E: info@smarth.com
Europe: T: (+44) (0)1592.760426 • E: info@smarth.com
Asia/Pacific: T: (+65) 6232.2858 • F: (+65) 6232.2300 • E: info@smarth.com
www.smartH.com
©2016. All rights reserved. The stylized “S,” “SMART” as well as “SMART High Reliability Solutions” are trademarks of SMART High Reliability Solutions, LLC. All other trademarks and registered trademarks are the property of their respective companies 09.15.16/HRS-M1/Rev.1