HP ENVY 4520 All-in-One series
Table of contents
1 How do I? ...................................................................................................................................................... 1
2 Get started .................................................................................................................................................... 2
Accessibility ............................................................................................................................................................ 2
Printer parts ........................................................................................................................................................... 3
Control panel and status lights ............................................................................................................................. 4
Paper basics ........................................................................................................................................................... 5
Load media ............................................................................................................................................................. 8
Load original ........................................................................................................................................................ 10
Open the HP printer software (Windows) ............................................................................................................ 11
Sleep mode .......................................................................................................................................................... 11
Quiet Mode ........................................................................................................................................................... 11
3 Print ........................................................................................................................................................... 13
Print documents .................................................................................................................................................. 13
Print photos ......................................................................................................................................................... 14
Print Quick Forms ................................................................................................................................................ 15
Print on both sides (duplexing) ........................................................................................................................... 15
Print from your mobile device ............................................................................................................................. 16
Print with AirPrint ................................................................................................................................................ 16
Print using the maximum dpi .............................................................................................................................. 17
Tips for print success ........................................................................................................................................... 18
4 Copy and scan .............................................................................................................................................. 20
Copy documents .................................................................................................................................................. 20
Scan ...................................................................................................................................................................... 21
Tips for copy and scan success ............................................................................................................................ 25
5 Use Web Services ......................................................................................................................................... 26
What are Web Services? ....................................................................................................................................... 26
Set up Web Services ............................................................................................................................................. 26
Print with HP ePrint ............................................................................................................................................. 28
Use HP Printables ................................................................................................................................................ 29
Use the HP Connected website ............................................................................................................................ 29
Remove Web Services .......................................................................................................................................... 29
ENWW
iii
6 Work with cartridges ................................................................................................................................... 30
Check the estimated ink levels ............................................................................................................................ 30
Replace the cartridges ......................................................................................................................................... 31
Order ink supplies ................................................................................................................................................ 32
Use single-cartridge mode .................................................................................................................................. 33
Cartridge warranty information .......................................................................................................................... 33
Tips for working with cartridges ......................................................................................................................... 34
7 Connect Your Printer .................................................................................................................................... 35
Set up the printer for wireless communication ................................................................................................... 35
Connect wirelessly to the printer without a router ............................................................................................. 37
Change network settings ..................................................................................................................................... 39
Advanced printer management tools (for networked printers) ......................................................................... 40
Tips for setting up and using a networked printer ............................................................................................. 42
8 Solve a problem ........................................................................................................................................... 43
Jams and paper-feed issues ................................................................................................................................ 43
Ink cartridge issues .............................................................................................................................................. 47
Printing issues ..................................................................................................................................................... 48
Copy issues .......................................................................................................................................................... 57
Scan issues ........................................................................................................................................................... 57
Network and connection issues .......................................................................................................................... 57
Printer hardware issues ....................................................................................................................................... 58
HP support ........................................................................................................................................................... 59
Appendix A Technical information ................................................................................................................... 61
Hewlett-Packard Company notices ..................................................................................................................... 61
Specifications ....................................................................................................................................................... 61
Environmental product stewardship program .................................................................................................... 63
Regulatory information ....................................................................................................................................... 67
Index ............................................................................................................................................................. 77
iv
ENWW
1
How do I?
Learn how to use your HP ENVY 4520 series
ENWW
●
Get started on page 2
●
Print on page 13
●
Use Web Services on page 26
●
Copy and scan on page 20
●
Work with cartridges on page 30
●
Connect Your Printer on page 35
●
Technical information on page 61
●
Solve a problem on page 43
1
2
Get started
This section contains the following topics:
●
Accessibility
●
Printer parts
●
Control panel and status lights
●
Paper basics
●
Load media
●
Load original
●
Open the HP printer software (Windows)
●
Sleep mode
●
Quiet Mode
Accessibility
The printer provides a number of features that make it accessible for people with disabilities.
Visual
The HP software provided with the printer is accessible for users with visual impairments or low vision by
using your operating system's accessibility options and features. The software also supports most assistive
technology such as screen readers, Braille readers, and voice-to-text applications. For users who are color
blind, colored buttons and tabs used in the HP software have simple text or icon labels that convey the
appropriate action.
Mobility
For users with mobility impairments, the HP software functions can be executed through keyboard
commands. The HP software also supports Windows accessibility options such as StickyKeys, ToggleKeys,
FilterKeys, and MouseKeys. The printer doors, buttons, paper trays, and paper-width guides can be operated
by users with limited strength and reach.
Support
For more details about the accessibility of this printer and HP's commitment to product accessibility, visit HP's
website at www.hp.com/accessibility.
For accessibility information for OS X, visit the Apple website at www.apple.com/accessibility.
2
Chapter 2 Get started
ENWW
Printer parts
Front view
Figure 2-1 Front and top views of HP ENVY 4520 All-in-One series
ENWW
Feature
Description
1
Lid
2
Lid-backing
3
Scanner glass
4
Cartridge access door
5
Paper path cover
6
Ink cartridges
7
On button (also referred to as the Power button)
8
Front panel
9
Printer display
10
Automatic output tray extender (also referred to as the tray extender)
11
Paper-width guides
12
Paper tray
13
Paper tray door
Printer parts
3
Back view
Figure 2-2 Rear view of HP ENVY 4520 All-in-One series
Feature
Description
1
Power connection. Use only the power cord supplied by HP.
2
Rear USB port
Control panel and status lights
Overview of buttons and lights
The following diagram and related table provides a quick reference to the printer control panel features.
4
Label
Name and Description
1
On button: Turns the printer on or off.
2
Back button: Returns to the previous screen.
3
Help button: Opens the Help menu for the current operation.
4
Home button: Returns to the Home screen, the screen that is displayed when you first turn on the printer.
5
Control panel display: Touch the screen to select menu options, or scroll through the menu items.
6
Wireless light: Indicates the status of the printer wireless connection.
●
Solid blue light indicates that wireless connection has been established and you can print.
●
Slow blinking light indicates that wireless is on, but the printer is not connected to a network. Make sure your printer is
within the range of wireless signal.
●
Fast blinking light indicates wireless error. Refer to the message on the printer display.
●
If wireless is turned off, the wireless light is off and the display screen shows Wireless Off.
Chapter 2 Get started
ENWW
Control panel display icons
Icon
Purpose
Copy : Opens the Copy menu where you can select a copy type or change the copy settings.
Scan : Opens the Scan menu where you can select a destination for your scan.
HP Printables: Provides a quick and easy way to access and print information from the web, such as coupons,
coloring pages, puzzles, and more.
Quick Forms : Using HP Quick Forms, you can print calendars, check lists, games, notebook paper, graph paper,
and music paper.
Setup : Opens the Setup menu where you can change preferences and use tools to perform maintenance
functions.
Help : Opens the Help menu where you can view How To videos, printer feature information, and tips.
ePrint icon: Opens the Web Services Summary menu, where you can check ePrint status details, change ePrint
settings, or print an Info page.
Wi-Fi Direct icon: Opens the Wi-Fi Direct menu where you can turn on Wi-Fi Direct, turn off Wi-Fi Direct, and
display the Wi-Fi Direct name and password.
Wireless icon: Opens the Wireless Summary menu where you can check wireless status and change wireless
settings. You can also print a wireless test report, helping diagnose network connection issues.
Ink icon: Shows estimated ink levels by cartridge. Displays a warning symbol if the ink level is less than the
minimum expected ink level.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a lowink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace cartridges until the print quality becomes unacceptable.
Paper basics
The printer is designed to work well with most types of office paper. It is best to test a variety of print paper
types before buying large quantities. Use HP paper for optimum print quality. Visit the HP website at
www.hp.com for more information about HP paper.
HP recommends plain papers with the ColorLok logo for printing everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of
reliability and print quality, and produce documents with crisp, vivid color, bolder blacks,
and that dry faster than ordinary plain papers. Look for papers with the ColorLok logo in
a variety of weights and sizes from major paper manufacturers.
ENWW
Paper basics
5
This section contains the following topics:
●
Recommended papers for printing
●
Order HP paper supplies
●
Tips for selecting and using paper
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for the type
of project you are printing.
Depending on your country/region, some of these papers might not be available.
Photo printing
●
HP Premium Plus Photo Paper
HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With HP
Premium Plus Photo Paper, you can print beautiful photos that are instant-dry so you can share them
right off the printer. It is available in several sizes, including A4, 8.5 x 11 inches (216 x 279 mm), 4 x 6
inches (10 x 15 cm), and 5 x 7 inches (13 x 18 cm), and in two finishes - glossy or soft gloss (semi-gloss).
Ideal for framing, displaying, or gifting your best photos and special photo projects. HP Premium Plus
Photo Paper delivers exceptional results with professional quality and durability.
●
HP Advanced Photo Paper
This glossy photo paper features an instant-dry finish for easy handling without smudging. It resists
water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to a storeprocessed photo. It is available in several sizes, including A4, 8.5 x 11 inches (216 x 279 mm), 4 x
6 inches (10 x 15 cm), and 5 x 7 inches (13 x 18 cm). It is acid-free for longer lasting documents.
●
HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This
affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper
with any inkjet printer. It is available in glossy finish in several sizes, including A4, 8.5 x 11 inches (216 x
279 mm), 5 x 7 inches (13 x 18 cm), and 4 x 6 inches (10 x 15 cm). It is acid-free for longer lasting
documents.
●
HP Photo Value Packs
HP Photo Value Packs conveniently package original HP ink cartridges and HP Advanced Photo Paper to
save you time and take the guesswork out of printing affordable, lab-quality photos with your HP
printer. Original HP inks and HP Advanced Photo Paper have been designed to work together so your
photos are long lasting and vivid, print after print. Great for printing out an entire vacation's worth of
photos or multiple prints to share.
6
Chapter 2 Get started
ENWW
Business documents
●
HP Premium Presentation Paper 120g Matte or HP Professional Paper 120 Matt
This paper is a heavy two-sided matte paper perfect for presentation, proposals, reports, and
newsletters. It is heavyweight for an impressive look and feel.
●
HP Brochure Paper 180g Glossy or HP Professional Paper 180 Glossy
These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for nearphotographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
●
HP Brochure Paper 180g Matte or HP Professional Paper 180 Matt
These papers are matte-coated on both sides for two-sided use. They are the perfect choice for nearphotographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
Everyday printing
All the papers listed for everyday printing feature ColorLok Technology for less smearing, bolder blacks, and
vivid colors.
●
HP Bright White Inkjet Paper and Color Inkjet Paper
HP Bright White Inkjet Paper and Color Inkjet Paper deliver high-contrast colors and sharp text. They are
opaque enough for two-sided color usage with no show-through, making them ideal for newsletters,
reports, and flyers.
●
HP Multipurpose and All-in-One Printing Paper
HP Multipurpose and All-in-One Printing Paper is a high-quality multifunction paper. It produces
documents that look and feel more substantial than documents printed on standard multipurpose or
copy paper. It is acid-free for longer lasting documents.
●
HP Office, Copy, and Copy & Print Paper
These varieties of HP paper high-quality multifunction paper are suitable for copies, drafts, memos, and
other everyday documents. They are acid-free for longer lasting documents.
●
HP Office Recycled Paper
HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber.
Order HP paper supplies
The printer is designed to work well with most types of office paper. Use HP paper for optimum print quality.
To order HP papers and other supplies, go to www.hp.com . At this time, some portions of the HP website are
available in English only.
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality,
and produce documents with crisp, vivid color, bolder blacks and shorter dry-time than ordinary plain papers.
Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers.
Tips for selecting and using paper
For the best results, observe the following guidelines.
ENWW
Paper basics
7
●
Load only one type of paper at a time into the paper or photo tray.
●
When loading the tray, make sure the paper is loaded correctly.
●
Do not overload the tray.
●
To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in the
tray:
—
Multipart forms
—
Media that is damaged, curled, or wrinkled
—
Media with cutouts or perforations
—
Media that is heavily textured, embossed, or does not accept ink well
—
Media that is too lightweight or stretches easily
—
Media that contains staples or clips
Learn about custom-size paper supported by your printer. Click here to go online for more information.
Load media
Select a paper size to continue.
To load small-size paper
8
1.
Open the paper tray door.
2.
Pull the paper tray out.
3.
Load paper.
●
Remove all paper from the paper tray, and then load the photo paper print side facing down and HP
logos facing up.
●
Slide the photo paper forward until it stops.
Chapter 2 Get started
ENWW
●
Slide the paper-width guides firmly against the edge of the photo paper.
4.
Push the paper tray back into the printer and close the paper tray door.
5.
Change or retain the paper settings on the printer display.
To load full-size paper
ENWW
1.
Open the paper tray door.
2.
Pull the paper tray out and slide the paper-width guides outward.
3.
Load paper.
●
Insert a stack of paper into the paper tray with the short edge forward and the print side down.
●
Slide the paper forward until it stops.
Load media
9
●
Slide the paper-width guides inward until they stop at the edges of the paper.
4.
Push the paper tray back in and close the paper tray door.
5.
Change or retain the paper settings on the printer display.
Load original
To load original on the scanner glass
10
1.
Lift the scanner lid.
2.
Load the original print side down on the right front corner of the glass.
Chapter 2 Get started
ENWW
3.
Close the scanner lid.
Open the HP printer software (Windows)
After installing the HP printer software, depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer
name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select
the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
Sleep mode
●
Power usage is reduced while in the Sleep mode.
●
After initial setup of printer, the printer enters the Sleep mode after five minutes of inactivity.
●
The time to the Sleep mode can be changed from the control panel.
To set the Sleep mode time
1.
From the Home screen, touch
( Setup ).
NOTE: If you do not see the Home screen, press the Home button.
2.
Touch Power Handling.
3.
Touch Sleep.
4.
Touch After 5 minutes, or After 10 minutes, or After 15 minutes.
Quiet Mode
Quiet Mode slows down printing to reduce overall noise without affecting print quality. Quiet Mode only works
for printing with Normal print quality on plain paper. To reduce printing noise, turn on Quiet Mode. To print at
normal speed, turn Quiet Mode off. Quiet mode is off by default.
NOTE: In Quiet Mode, if you print on plain paper with the Draft or Best print quality, or if you print photos or
envelopes, the printer works in the same way as when Quiet Mode is off.
ENWW
Open the HP printer software (Windows)
11
To turn Quiet Mode on or off from the printer control panel
1.
From the Home screen, touch Setup .
2.
Touch Preferences .
3.
Touch On or Off next to Quiet Mode.
To turn Quiet Mode on or off from the printer software (Windows)
1.
Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 11.
2.
Click the Quiet Mode tab.
3.
Click On or Off.
4.
Click Save Settings.
To turn Quiet Mode on or off from the Embedded Web Server (EWS)
12
1.
Open the EWS. For more information, see Open the embedded Web server on page 41.
2.
Click the Settings tab.
3.
In the Preferences section, select Quiet Mode, and then select On or Off.
4.
Click Apply.
Chapter 2 Get started
ENWW
3
Print
Most print settings are automatically handled by the software application. Change the settings manually only
when you want to change print quality, print on specific types of paper, or use special features.
This section contains the following topics:
●
Print documents
●
Print photos
●
Print Quick Forms
●
Print on both sides (duplexing)
●
Print from your mobile device
●
Print with AirPrint
●
Print using the maximum dpi
●
Tips for print success
Print documents
Make sure paper is loaded into the paper tray.
To print a document (Windows)
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4.
Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.
Click OK to close the Properties dialog box.
6.
Click Print or OK to begin printing.
To print documents (OS X)
1.
From the File menu in your software, choose Print.
2.
Make sure your printer is selected.
3.
Specify the page properties.
If you do not see options on the Print dialog, click Show Details.
ENWW
Print documents
13
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
●
Choose the paper size.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
4.
●
Select the orientation.
●
Enter the scaling percentage.
Click Print.
NOTE: If your printed documents are not aligned within the margins of the paper, make sure that you have
selected the correct language and region. On the printer display, select Setup, and then select Preferences.
Select your language, and then region from the options provided. The correct language and country/region
settings ensure that the printer will have the appropriate default paper size settings.
Print photos
Make sure photo paper is loaded into the photo tray.
To print a photo from the printer software (Windows)
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4.
Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.
Click OK to return to the Properties dialog box.
6.
Click OK, and then click Print or OK in the Print dialog box.
To print a photo from the computer (OS X)
1.
From the File menu in your software, choose Print.
2.
Make sure your printer is selected.
3.
Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
a.
14
Chapter 3 Print
Choose the appropriate paper size in the Paper Size pop-up menu.
ENWW
NOTE: If you change the paper size ensure that you have loaded the correct paper.
4.
b.
Select an Orientation.
c.
From the pop-up menu, choose Paper Type/Quality, and then choose the following settings:
●
Paper Type: The appropriate photo paper type
●
Quality: Best or Maximum dpi
●
Click the Color Options disclosure triangle, and then choose the appropriate Photo Fix
option.
—
Off: applies no changes to the image.
—
On: automatically focuses the image; moderately adjusts image sharpness.
Select any other print settings you want, and then click Print.
Print Quick Forms
Use Quick Forms to print calendars, check lists, games, notebook paper, graph paper, music paper, and
games.
To print Quick Forms
1.
From the Home screen on the printer display, touch Quick Forms.
TIP: If the Quick Forms option does not appear on the printer display, touch the Home button, and
then swipe to the right until you see Quick Forms .
2.
Touch to select one of the Quick Forms options.
3.
After you have selected the type of form that you want to print, select the number of copies, and then
touch Print.
Print on both sides (duplexing)
To print on both sides of the page
You can print on both sides of a sheet of paper automatically by using the automatic two-sided printing
mechanism (duplexer).
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4.
ENWW
Select the appropriate options.
Print Quick Forms
15
●
On the Layout tab, select Portrait or Landscape orientation, and select Flip on Long Edge or Flip
on Short Edge from the Print on Both Sides drop-down list.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Click the Advanced button, in the Paper/Output area, select the appropriate paper size from the
Paper Size drop-down list.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
5.
Click OK to print.
NOTE: After one page of the document has been printed, wait for the printer to reload the paper
automatically to print on the other side. You do not need to take any action.
To print on both sides of the paper (OS X)
1.
From the File menu in your software, choose Print.
2.
In the Print dialog, choose Layout from the pop-up menu.
3.
Choose the type of binding you want for your two-sided pages, and then click Print.
Print from your mobile device
With HP mobile printing technology, you can print from your smartphone or tablet to your printer easily.
If you are at home or office, to use the printing capabilities already on your smartphone or tablet to print:
1.
Make sure your mobile device and printer are on the same network.
2.
Select the photo or document you want to print and choose your printer.
3.
Confirm print settings and print.
If you want to print without accessing the network, see Connect wirelessly to the printer without a router
on page 37 for more information.
If you are on the road, you can print a document by sending an email with the ePrint app to your ePrint
enabled printer. See Print with HP ePrint on page 28 for more information.
For more information, visit the HP Mobile Printing website ( www.hp.com/go/mobileprinting ).
Print with AirPrint
Printing using Apple’s AirPrint is supported for iOS 4.2 and Mac OS X 10.7 or later. Use AirPrint to print
wirelessly to the printer from an iPad (iOS 4.2), iPhone (3GS or later), or iPod touch (third generation or later)
in the following mobile applications:
16
●
Mail
●
Photos
●
Safari
●
Supported third-party applications, for example Evernote
Chapter 3 Print
ENWW
To use AirPrint, ensure the following:
●
The printer and the Apple device must be connected to the same network as your AirPrint enabled
device. For more information about using AirPrint and about which HP products are compatible with
AirPrint, go to www.hp.com/go/mobileprinting .
●
Load paper that matches the paper settings of the printer.
Print using the maximum dpi
Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of disk
space.
To print in maximum dpi mode (Windows)
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4.
Click the Paper/Quality tab.
5.
From the Media drop-down list, select the appropriate paper type and print quality.
6.
Click the Advanced button.
7.
In the Printer Features area, select Yes from the Print in Max DPI drop-down list.
8.
Select the appropriate paper size from the Paper Size drop-down list.
9.
Click OK to close the advanced options.
10. Confirm Orientation on the Layout tab, and then click OK to print.
To print using maximum dpi (OS X)
1.
From the File menu in your software, choose Print.
2.
Make sure your printer is selected.
3.
Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the options can
vary from one application to another.
a.
Choose the appropriate paper size in the Paper Size pop-up menu.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and set the
paper size on the printer control panel to match.
b.
ENWW
From the pop-up menu, choose Paper Type/Quality, and then choose the following settings:
Print using the maximum dpi
17
4.
●
Paper Type: The appropriate paper type
●
Quality: Maximum dpi
Select any other print settings that you want, and then click Print.
Tips for print success
Use the following tips to print successfully.
Tips for ink and paper
●
Use original HP cartridges. Original HP cartridges are designed for and tested with HP printers to help
you produce great results, time after time.
●
Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch
(Ink) from the
Home screen.
To learn more tips about working with cartridges, see Tips for working with cartridges on page 34 for
more information.
●
Load a stack of paper, not just one page. Use clean and flat paper of the same size. Make sure only one
type of paper is loaded at a time.
●
Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the paperwidth guides do not bend the paper in the paper tray.
●
Set the print quality and paper size settings according to the type and size of paper loaded in the paper
tray.
●
Learn how to print envelopes from your computer. Click here to go online for more information.
Printer settings tips
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the Tray
Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Select the appropriate paper size from the Paper Size drop-down list in the Advanced Options dialog
box. Access the Advanced Options dialog box by clicking the Advanced button on the Layout or Paper/
Quality tab.
●
To change default print settings, click Print & Scan , and then click Set Preferences in the printer
software.
Depending on your operating system, do one of the following to open the printer software:
●
18
—
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
—
Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on the app
bar, and then click the icon with the printer's name.
—
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click HP ENVY 4520 series, and then click HP ENVY 4520 series.
If you want to print a black and white document using black ink only, click the Advanced button. From
the Print in Grayscale drop-down menu, select Black Ink Only, then click the OK button.
Chapter 3 Print
ENWW
Printer settings tips (OS X)
●
On the Print dialog, use the Paper Size pop-up menu to select the size of paper loaded in the printer.
●
On the Print dialog, choose the Paper Type/Quality pop-up menu and select the appropriate paper type
and quality.
●
To print a black and white document using only black ink, choose the Paper Type/Quality, click the
Color Options disclosure triangle, and choose Grayscale from the Color pop-up menu.
●
Original HP ink cartridges are designed and tested with HP printers and papers to help you easily
produce great results, time after time.
Notes
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs
required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased original HP ink cartridges, go to:
www.hp.com/go/anticounterfeit
●
Ink level warnings and indicators provide estimates for planning purposes only.
NOTE: When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the cartridges until print quality
becomes unacceptable.
ENWW
●
Software settings selected in the print driver only apply to printing, they do not apply to copying or
scanning.
●
You can print your document on both sides of the paper.
Tips for print success
19
4
Copy and scan
●
Copy documents
●
Scan
●
Tips for copy and scan success
Copy documents
The Copy menu on the printer display allows you to easily select number of copies and color or black and
white for copying on plain paper. You can also easily access advanced settings, such as changing the paper
type and size, adjusting the darkness of the copy, and resizing the copy.
Make a 1-sided copy
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Specify number of copies and settings.
3.
●
From the Home screen, touch Copy . Select the desired number of copies.
●
Touch
●
If the 2–Sided option is ON, touch to select OFF.
●
Touch
(Settings) to specify paper size, paper type, quality, or other settings.
(Back) to return to the Copy menu.
Touch Start Black or Start Color to start the copy job.
Make a 2-sided copy from the scanner glass
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Specify number of copies and settings.
●
From the Home screen, touch Copy . Select the desired number of copies.
●
Touch
(Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
●
If the 2–Sided option is OFF, touch to select ON.
●
From the Settings screen, specify paper size, paper type, quality, or other settings.
●
Touch
(Back) to return to the Copy screen.
3.
Touch Start Black or Start Color to start the copy job.
4.
When prompted, load the second original and touch OK.
Make a 2-sided copy from the document feeder
1.
20
Load 1-sided originals print side up into the document feeder.
Chapter 4 Copy and scan
ENWW
2.
●
Use two 1-sided originals to create a 2-sided copy.
●
Use multiple 1-sided original pages to create several pages of 2-sided copy. For example: eight
pages of 1-sided originals make four pages of 2-sided copy.
Specify number of copies and settings.
●
From the Home screen, touch Copy . Select the desired number of copies.
●
Touch
(Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
3.
●
If the 2–Sided option is OFF, touch to select ON.
●
From the Settings screen, specify paper size, paper type, quality, or other settings.
●
Touch
(Back) to return to the Copy screen.
Touch Start Black or Start Color to start the copy job.
Make a 2-sided copy
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Specify number of copies and settings.
●
From the Home screen, touch Copy . Select the desired number of copies.
●
Touch
(Settings), scroll through the options, and then touch Resize to make sure Actual is
selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
●
If the 2–Sided option is OFF, touch to select ON.
●
From the Settings screen, specify paper size, paper type, quality, or other settings.
●
Touch
(Back) to return to the Copy screen.
3.
Touch Start Black or Start Color to start the copy job.
4.
When prompted, load the second original and touch OK.
Scan
You can scan documents, photos, and other paper types, and save them to your computer. After scanning to a
computer is enabled, you can start scanning from the printer display or from the printer software on your
computer.
NOTE:
ENWW
Some scan functions are only available after you have installed the HP printer software.
●
Scan to a computer
●
Scan using Webscan
●
Change scan settings (Windows)
●
Create a new scan shortcut (Windows)
Scan
21
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To enable the scan to a computer feature (Windows)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the feature
has been disabled, and you wish to enable it again.
1.
Depending on your operating system, do one of the following to open the HP printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer name,
and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the
printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder of your printer.
2.
In the Scan section, select Manage Scan to Computer.
3.
Click Enable.
To enable the scan to a computer feature (OS X)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the feature
has been disabled, and you wish to enable it again.
1.
Open HP Utility.
2.
Under Scan Settings, click Scan to Computer.
3.
Ensure that Enable Scan to Computer is selected.
To scan an original from the printer control panel
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Touch Scan .
3.
Touch a computer that you want to scan to.
4.
Choose the type of scan you want.
5.
Touch OK.
To scan a document or photo to a file (Windows)
22
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Double-click the printer icon on the desktop or do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
Chapter 4 Copy and scan
ENWW
3.
In the printer software, click Scan a Document or Photo .
4.
Select the type of scan you want and then click Scan .
●
Choose Save as PDF to save the document (or photo) as a PDF file.
●
Choose Save as JPEG to save the photo (or document) as an image file.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for
any scan.
For more information, see Change scan settings (Windows) on page 24.
If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the preview
screen.
To scan an original from HP printer software (OS X)
1.
Open HP Scan.
HP Scan is located in the Applications/Hewlett-Packard folder at the top level of the hard disk.
2.
Choose the type of scan profile you want and follow the on-screen instructions.
Go online to learn more about using the HP Scan software. Learn how to:
●
customize scan settings, such as image file type, scan resolution, and contrast levels.
●
scan to network folders and cloud drives.
●
preview and adjust images before scanning.
Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer
to your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
NOTE:
By default, Webscan is off. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it off. For more
information, contact your network administrator or the person who set up your network.
To enable Webscan
ENWW
1.
Open the embedded web server. For more information, see Open the embedded Web server
on page 41.
2.
Click the Settings tab.
3.
In the Security section, click Administrator Settings.
4.
Select Webscan to enable Webscan.
5.
Click Apply and then click OK .
Scan
23
To scan using Webscan
Webscan offers basic scan options. For additional scan options or functionality, scan from the HP printer
software.
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Open the embedded web server. For more information, see Open the embedded Web server
on page 41.
3.
Click the Scan tab.
4.
Click Webscan in the left pane, change any settings, and then click Start Scan .
Change scan settings (Windows)
You can modify any of the scan settings either for a singular use or save the changes to use permanently.
These settings include options such as page size and orientation, scan resolution, contrast, and the folder
location for saved scans.
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Double-click the printer icon on the desktop or do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
3.
In the printer software, click Scan a Document or Photo .
4.
Click the More link in the top right corner of the HP Scan dialog.
The detailed settings pane appears on the right. The left column summarizes the current settings for
each section. The right column allows you to change the settings in the highlighted section.
5.
Click each section at the left of the detailed settings pane to review the settings in that section.
You can review and change most settings using drop-down menus.
Some settings allow greater flexibility by displaying a new pane. These are indicated by a + (plus sign) at
the right of the setting. You must either accept or cancel any changes on this pane to return to the
detailed settings pane.
6.
When you have finished changing settings, do one of the following.
●
Click Scan . You are prompted to save or reject the changes to the shortcut after the scan is
finished.
●
Click the save icon to the right of the shortcut, and then click Scan .
Go online to learn more about using the HP Scan software. Learn how to:
24
●
customize scan settings, such as image file type, scan resolution, and contrast levels.
●
scan to network folders and cloud drives.
●
preview and adjust images before scanning.
Chapter 4 Copy and scan
ENWW
Create a new scan shortcut (Windows)
You can create your own scan shortcut to make scanning easier. For example, you might want to regularly
scan and save photos in PNG format, rather than JPEG.
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Double-click the printer icon on the desktop or do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
3.
In the printer software, click Scan a Document or Photo .
4.
Click Create New Scan Shortcut .
5.
Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then click
Create .
For example, if you are creating a new shortcut for photos, choose either Save as JPEG or Email as
JPEG . This makes available the options for working with graphics when scanning.
6.
Change the settings for your new shortcut to meet your needs, and then click the save icon to the right
of the shortcut.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for
any scan.
For more information, see Change scan settings (Windows) on page 24.
Tips for copy and scan success
Use the following tips to copy and scan successfully:
ENWW
●
Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as
part of the image.
●
Load your original, print side down, on the right front corner of the glass.
●
To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
●
If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan from the
printer software.
●
To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the
software.
●
If you want to scan a document with several pages into one file instead of multiple files, start the scan
with the printer software instead of selecting Scan from the printer display.
Tips for copy and scan success
25
5
Use Web Services
●
What are Web Services?
●
Set up Web Services
●
Print with HP ePrint
●
Use HP Printables
●
Use the HP Connected website
●
Remove Web Services
What are Web Services?
ePrint
●
HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anytime,
from any location. It's as simple as sending an email to the email address assigned to your printer when
you enable Web Services on the printer. No special drivers or software are needed. If you can send an
email, you can print from anywhere, using ePrint .
Once you have signed up for an account on HP Connected ( www.hpconnected.com ), you can sign in to
view your ePrint job status, manage your ePrint printer queue, control who can use your printer's ePrint
email address to print, and get help for ePrint .
HP Printables
●
HP Printables allow you to easily locate and print preformatted web content, directly from your printer.
You can also scan and store your documents digitally on the Web.
HP Printables provide a wide range of content, from store coupons to family activities, news, travel,
sports, cooking, photos, and many more. You can even view and print your online images from popular
photo sites.
Certain HP Printables also allow you to schedule the delivery of app content to your printer.
Preformatted content designed specifically for your printer means no cut-off text and pictures and no
extra pages with only one line of text. On some printers, you can also choose paper and print quality
settings on the print preview screen.
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using wireless
connection.
To set up Web Services, use one of the following methods.
To set up Web Services using the printer control panel
26
1.
From the printer control panel display, touch HP Printables.
2.
Touch Enable Web Services.
Chapter 5 Use Web Services
ENWW
3.
Touch Accept to accept the Web Services terms of use and enable Web Services.
4.
In the Auto Update screen, touch Yes to allow the printer to automatically check for and install product
updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
You have to repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the Embedded Web Server (EWS)
1.
Open the EWS. For more information, see Open the embedded Web server on page 41.
2.
Click the Web Services tab.
3.
In the Web Services Settings section, click Setup , click Continue, and follow the on-screen instructions
to accept the terms of use.
4.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
Repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the HP printer software (Windows)
1.
Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 11.
2.
In the window that appears, double-click Print & Scan and then select Connect Printer to the Web under
Print. The printer's home page (embedded web server) opens.
3.
Click the Web Services tab.
4.
In the Web Services Settings section, click Setup , click Continue, and follow the on-screen instructions
to accept the terms of use.
5.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer will download and install the update, and then
restart. You will have to repeat the instructions from step 1 to set up Web Services.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the details, contact your network administrator
or the person who set up the network.
6.
ENWW
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
Set up Web Services
27
Print with HP ePrint
HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer anywhere you
can send an email. Just send your documents and photos to the email address assigned to your printer when
you enable Web Services. No additional drivers or software are needed.
●
Your printer needs to have a wireless network connection to the Internet. You will not be able to use HP
ePrint via a USB connection to a computer.
●
Attachments might print differently from the way they appear in the software program that created
them, depending on the original fonts and layout options used.
●
Free product updates are provided with HP ePrint. Some updates might be required to enable certain
functionality.
Once you have signed up for an account on HP Connected (www.hpconnected.com), you can sign in to view
your ePrint job status, manage your ePrint printer queue, control who can use your printer’s ePrint email
address to print, and get help for ePrint.
Before you can use ePrint, make sure that:
●
The printer is connected to an active network providing Internet access.
●
Web Services is turned on. If not, you will be prompted to turn it on.
To ePrint a document from anywhere
1.
2.
3.
Enable Web Services.
a.
From the Home screen, touch the
b.
Accept the Terms of Use, and then follow the onscreen instructions to enable Web Services.
c.
Print the ePrint information page, and then follow the instructions on the page to sign up for an
ePrint account.
( ePrint ) icon.
Find your ePrint email address.
a.
Touch
b.
Touch
c.
In the Web Services Settings menu, touch Display Email Address.
( ePrint ) on the Home screen.
(Web Services Settings).
Email your document to the printer for printing.
a.
Create a new email and attach the document to print.
b.
Send the email to the printer email address.
The printer prints the attached document.
NOTE: The ePrint server does not accept email print jobs if there are multiple email addresses
included in the "To" or "Cc" fields. Only enter the HP ePrint email address in the "To" field. Do not enter
any additional email addresses in the other fields.
NOTE: The email is printed once it is received. As with any email, there is no guarantee when or whether it is
received. You can check the print status on HP Connected (www.hpconnected.com).
28
Chapter 5 Use Web Services
ENWW
NOTE: Documents printed with ePrint may appear different from the original. Style, formatting, and text
flow may differ from the original document. For documents that need to be printed with a higher quality (such
as legal documents), we recommend that you print from the software application on your computer, where
you have more control over what your printout looks like.
Click here to go online for more information.
Use HP Printables
Print pages from the web, without using a computer, by setting up HP Printables, a free service from HP. You
can print coloring pages, calendars, puzzles, recipes, maps, and more, depending on the apps available in
your country/region.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com .
Use the HP Connected website
Use HP’s free HP Connected website to set up increased security for HP ePrint, and specify the email
addresses that are allowed to send email to your printer. You can also get product updates, more apps, and
other free services.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com .
Remove Web Services
To remove Web Services
ENWW
1.
From the printer control panel display, touch
2.
Touch Remove Web Services.
3.
Touch Yes to confirm.
( ePrint ), and then touch
(Web Services Settings).
Use HP Printables
29
6
Work with cartridges
●
Check the estimated ink levels
●
Replace the cartridges
●
Order ink supplies
●
Use single-cartridge mode
●
Cartridge warranty information
●
Tips for working with cartridges
Check the estimated ink levels
To check the estimated ink levels from the printer control panel
▲
From the Home screen, touch the
(Ink icon) to display the estimated ink levels.
To check the ink levels from the printer software (Windows)
1.
Open the HP printer software.
2.
In the printer software, click Estimated Ink Levels.
To check the ink levels from HP Utility
1.
Open HP Utility.
HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of the hard
disk.
2.
Select the HP ENVY 4520 series from the list of devices at the left of the window.
3.
Click Supplies Status.
The estimated ink levels appear.
4.
Click All Settings to return to the Information and Support pane.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used in
another printer, the ink level indicator might be inaccurate or unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a
low-ink warning message, consider having a replacement cartridge available to avoid possible printing
delays. You do not have to replace the cartridges until the print quality is unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways, including in the
initialization process, which prepares the product and cartridges for printing, and in printhead servicing,
which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge
after it is used. For more information, see www.hp.com/go/inkusage.
30
Chapter 6 Work with cartridges
ENWW
Replace the cartridges
To replace the cartridges
1.
Check that power is on.
2.
Remove the old cartridge.
3.
a.
Open the access door.
b.
Open the latch on the cartridge slot.
c.
Remove the cartridge from the slot.
Insert a new cartridge.
a.
ENWW
Remove the cartridge from packaging.
Replace the cartridges
31
4.
b.
Remove plastic tape using the pull tab.
c.
Slide the new cartridge in the slot and close the latch until it clicks.
Close the cartridge access door.
NOTE: The HP printer software prompts you to align the ink cartridges when you print a document
after installing a new ink cartridge.
Order ink supplies
Before ordering cartridges, locate the correct cartridge number.
Locate the cartridge number on the printer
▲
The cartridge number is located inside the cartridge access door.
Locate the cartridge number in the printer software
1.
32
Depending on your operating system, do one of the following to open the printer software:
Chapter 6 Work with cartridges
ENWW
2.
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
In the printer software, click Shop, and then click Shop For Supplies Online.
The correct cartridge number appears when you use this link.
To find the print cartridge reorder numbers
1.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of
the hard disk.
2.
Click Supplies Info.
The print cartridge ordering numbers appear.
3.
Click All Settings to return to the Information and Support pane.
To order original HP supplies for the HP ENVY 4520 series, go to www.hp.com/buy/supplies . If prompted,
choose your country/region, and then follow the prompts to find the right cartridges for your printer.
NOTE: Ordering ink cartridges online is not supported in all countries/regions. If it is not available in your
country/region, you may still view supplies information and print a list for reference when shopping at a local
HP reseller.
Use single-cartridge mode
Use the single-cartridge mode to operate the HP ENVY 4520 series with only one ink cartridge. The singlecartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During singlecartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.
NOTE: When the HP ENVY 4520 series operates in single-cartridge mode, a message is displayed on the
printer display. If the message is displayed and two ink cartridges are installed in the printer, verify that the
protective piece of plastic tape has been removed from each ink cartridge. When plastic tape covers the ink
cartridge contacts, the printer cannot detect that the ink cartridge is installed.
Exit single-cartridge mode
●
Install two ink cartridges in the HP ENVY 4520 series to exit single-cartridge mode.
Cartridge warranty information
The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing device. This
warranty does not cover HP ink cartridges that have been refilled, remanufactured, refurbished, misused, or
tampered with.
During the warranty period the cartridge is covered as long as the HP ink is not depleted and the end of
warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the
cartridge as indicated:
ENWW
Use single-cartridge mode
33
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that came
with the product.
Tips for working with cartridges
Use the following tips to work with cartridges:
34
●
To protect the cartridges from drying out, always turn the printer off using the On button, and wait until
the On button light goes out.
●
Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges
reduces ink evaporation.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color and
icon for each slot. Make sure the cartridges snap into place.
●
Alignment is automatic after new cartridge installation. Alignment can also help later, in cases of blurred
or jagged lines. See Fix print quality issues on page 52 for more information.
●
When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider getting
replacement cartridges to avoid possible printing delays. You do not need to replace the cartridges until
print quality becomes unacceptable. See Replace the cartridges on page 31 for more information.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible.
Outside of the printer, if unprotected, cartridges begin to dry out.
Chapter 6 Work with cartridges
ENWW
7
Connect Your Printer
Additional advanced settings are available from the printer's home page (embedded web server or EWS). For
more information, see Open the embedded Web server on page 41.
This section contains the following topics:
●
Set up the printer for wireless communication
●
Connect wirelessly to the printer without a router
●
Change network settings
●
Advanced printer management tools (for networked printers)
●
Tips for setting up and using a networked printer
Set up the printer for wireless communication
●
Before you begin
●
Set up the printer on your wireless network
●
Change the connection type
●
Test the wireless connection
●
Turn on or off the wireless capability of the printer
Before you begin
Ensure the following:
●
The wireless network is set up and working properly.
●
The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID) and a wireless
password.
●
The wireless network name is the name of your wireless network.
●
The wireless password prevents other people from connecting to your wireless network without your
permission. Depending on the level of security required, your wireless network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless network,
you can sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security password or cannot remember this information, see the
documentation provided with your computer or with the wireless router. If you still cannot find this
information, contact your network administrator or the person who set up the wireless network.
Set up the printer on your wireless network
Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication.
ENWW
Set up the printer for wireless communication
35
NOTE:
Before you proceed, go through the list at Before you begin on page 35.
1.
From the printer control panel, touch
2.
Touch
3.
Touch Wireless Setup Wizard.
4.
Follow the display instructions to complete the setup.
( Wireless ).
( Settings ).
Change the connection type
After you have installed the HP printer software and connected the printer to your computer, you can use the
software to change the connection type (for example, from a USB connection to a wireless connection).
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin on page 35.
1.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer name,
and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the
printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder of your printer.
2.
Click Printer Setup & Software.
3.
Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless network
1.
Connect the printer to your wireless network.
2.
Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to wireless for this printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information. At this time, this website might not be available in all languages.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test report
provides information about the printer status, hardware (MAC) address, and IP address. If the printer is
connected to a network, the test report displays details about the network settings.
To print the wireless test report
36
1.
From the printer control panel, touch
2.
Touch Print Reports
3.
Touch Wireless Test Report.
Chapter 7 Connect Your Printer
( Wireless ), and then touch
( Settings ).
ENWW
Turn on or off the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is on.
1.
From the printer control panel, touch
2.
Touch to turn Wireless on or off. If the printer is not configured to connect to a network, turning wireless
on automatically launches the Wireless Setup Wizard.
( Wireless ), and then touch
( Settings ).
Connect wirelessly to the printer without a router
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable
device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
●
Make sure your computer or mobile device has the necessary software.
—
If you are using a computer, make sure you have installed the printer software provided with the
printer.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first and
then install the printer software. Select Wireless when prompted by the printer software for a
connection type.
—
If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/global/us/en/eprint/
mobile_printing_apps.html.
●
Make sure Wi-Fi Direct for your printer is turned on.
●
Wi-Fi Direct can be turned on using two modes:
—
Automatic mode: Allows any mobile device to connect to your printer.
—
Manual mode: Requires mobile devices to be confirmed at the printer control panel before they can
connect to your printer. This mode provides increased security. Additional prompts or PINs are
required before the connection can be established.
●
Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
●
Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to
a network using a wireless connection.
●
Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To turn on Wi-Fi Direct
1.
From the printer control panel, touch
2.
Touch
( Settings ), and then touch to turn on Wi-Fi Direct.
3.
Touch
( Back ).
(Wi-Fi Direct).
The Wi-Fi Direct Details menu appears with the Wi-Fi Direct name and password.
TIP: You can also turn on Wi-Fi Direct from the EWS. For more information about using the EWS, see Open
the embedded Web server on page 41.
ENWW
Connect wirelessly to the printer without a router
37
To print from a wireless-capable mobile device that supports Wi-Fi Direct
Make sure you have installed the latest version of HP Print Service Plugin on your mobile device. You can
download this plugin from the Google Play application store.
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on Wi-Fi Direct on your mobile device. For more information, see the documentation provided with
the mobile device.
3.
From your mobile device, select a document from a print enabled application, and then select the option
to print the document.
The list of available printers appears.
4.
From the list of available printers, choose the Wi-Fi Direct name shown such as DIRECT-**- HP
ENVY-4520 (where ** are the unique characters to identify your printer), and then follow the on-screen
instructions on the printer and your mobile device.
5.
Print your document.
To print from a wireless-capable computer (Windows)
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on the computer's Wi-Fi connection. For more information, see the documentation provided with
the computer.
NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3.
From the computer, connect to a new network. Use the process you normally use to connect to a new
wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless networks shown
such as DIRECT-**- HP ENVY-4520 (where ** are the unique characters to identify your printer and XXXX
is the printer model located on the printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To find the password, touch
4.
(Wi-Fi Direct) on the Home screen.
Proceed to step 5 if the printer has been installed and connected to the computer over a wireless
network. If the printer has been installed and connected to your computer with a USB cable, follow the
steps below to install the printer software using the HP Wi-Fi Direct connection.
a.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select
the printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder of your printer.
b.
Click Printer Setup & Software, and then select Connect a new printer.
c.
When the Connection Options software screen appears, select Wireless.
Select your HP printer software from the list of detected printers.
d.
5.
38
Follow the on-screen instructions.
Print your document.
Chapter 7 Connect Your Printer
ENWW
To print from a wireless-capable computer (OS X)
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on Wi-Fi on the computer.
For more information, see the documentation provided by Apple.
3.
Click the Wi-Fi icon and choose the Wi-Fi Direct name, such as DIRECT-**- HP ENVY-4520 (where ** are
the unique characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To find the password, touch
4.
(Wi-Fi Direct) on the Home screen.
Add the printer.
a.
Open System Preferences .
b.
Depending on your operating system, click Print & Scan or Printers & Scanners .
c.
Click + below the list of printers at the left.
d.
Select the printer from the list of detected printers (the word “Bonjour” is listed the right column
beside the printer name), and click Add.
Change network settings
From the printer control panel, you can set up and manage your printer wireless connection and perform a
variety of network management tasks. This includes viewing and changing network settings, restoring
network defaults, and turning the wireless function on or off.
CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user,
you should not change some of these settings (such as the link speed, IP settings, default gateway, and
firewall settings).
To print the network configuration page
1.
From the Home screen, touch
2.
Touch Print Reports and then touch Network Configuration Page.
(Wireless) and then touch
( Settings ).
To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you are an
advanced user and want to use different settings (such as the IP address, subnet mask, or the default
gateway), you can change them manually.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address during the
installation, your network components cannot connect with the printer. To avoid errors, first let the printer
join the network and obtain an IP address automatically. After the subnet mask, default gateway, and DNS
address settings are configured, you can change the printer IP address to a manual setting.
1.
From the Home screen, touch
2.
Touch Advanced Settings.
3.
Touch IP Settings.
(Wireless) and then touch
( Settings ).
A message appears warning that changing the IP address removes the printer from the network.
ENWW
Change network settings
39
4.
Touch OK to continue.
5.
Automatic is selected by default. To change the settings manually, touch Manual, and then enter the
appropriate information for the following settings:
6.
●
IP Address
●
Subnet Mask
●
Default Gateway
●
DNS Address
Enter your changes, and then touch Apply.
Advanced printer management tools (for networked printers)
To view or change some settings, you might need a password.
NOTE: You can open and use the embedded Web server without being connected to the Internet. However,
some features are not available.
This section contains the following topics:
●
Toolbox (Windows)
●
HP Utility (OS X)
●
Open the embedded Web server
●
About cookies
Toolbox (Windows)
The Toolbox provides maintenance information about the printer.
NOTE: The Toolbox can be installed from the HP Software CD if the computer meets the system
requirements. System requirements can be found in the Readme file, which is available on the HP printer
software CD provided with your printer.
To open the Toolbox
1.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then
select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's name.
2.
Click Print & Scan .
3.
Click Maintain Your Printer.
HP Utility (OS X)
HP Utility contains tools to configure print settings, calibrate the printer, order supplies online, and find
website support information.
40
Chapter 7 Connect Your Printer
ENWW
NOTE:
The features available in HP Utility vary depending on the selected printer.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink
warning message, consider having a replacement cartridge available to avoid possible printing delays. You do
not need to replace cartridges until the print quality becomes unacceptable.
Double-click HP Utility in the Hewlett-Packard folder in the Applications folder at the top level of the hard
disk.
Open the embedded Web server
You can access the embedded Web server via either the network or Wi-Fi Direct.
To open the embedded Web server via network
NOTE: The printer must be on a network and must have an IP address. The IP address for the printer can be
found by pressing the Wireless icon or by printing a network configuration page.
●
In a supported Web browser on your computer, type the IP address or hostname that has been assigned
to the printer.
For example, if the IP address is 192.168.0.12, type the following address into a Web browser: http://
192.168.0.12.
To open the embedded Web server using Wi-Fi Direct
1.
From the Home screen, touch
2.
If Wi-Fi Direct is Off, touch
3.
From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**- HP ENVY-4520 (where ** are the unique characters to identify your printer). Enter
the Wi-Fi Direct password when prompted.
4.
In a supported Web browser on your computer, type the printer IP address (for example, http://
192.168.223.1).
(Wi-Fi Direct).
( Settings ), and then touch to turn on Wi-Fi Direct.
About cookies
The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you are
browsing. These files let the EWS recognize your computer the next time you visit. For example, if you have
configured the EWS language, a cookie helps remember which language you have selected so that the next
time you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that
stores customer-specific preferences) are stored on the computer until you clear them manually.
You can configure your browser to accept all cookies, or you can configure it to alert you every time a cookie is
offered, which allows you to decide which cookies to accept or refuse. You can also use your browser to
remove unwanted cookies.
NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the following
features:
ENWW
●
Starting where you left the application (especially useful when using setup wizards)
●
Remembering the EWS browser language setting
●
Personalizing the EWS Home page
Advanced printer management tools (for networked printers)
41
For information about how to change your privacy and cookie settings and how to view or delete cookies, see
the documentation available with your Web browser.
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
●
When setting up the wireless networked printer, make sure your wireless router is powered on. The
printer searches for wireless routers, then lists the detected network names on the display.
●
To check the wireless connection on the printer, touch the
(Wireless) on the control panel to open
the Wireless menu. If it shows that Wireless is Off, touch to turn the wireless connection on. The
Wireless Setup Wizard starts automatically. Follow the on-screen instructions to set up your printer
wireless connection.
42
●
If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from the VPN
before you can access any other device on your network, including the printer.
●
Learn more about configuring your network and the printer for wireless printing. Click here to go online
for more information.
●
Learn how to find your network security settings. Click here to go online for more information.
●
Learn about the Print and Scan Doctor (Windows only) and other troubleshooting tips. Click here to go
online for more information.
●
Learn how to change from a USB to wireless connection. Click here to go online for more information.
●
Learn how to work with your firewall and anti-virus programs during printer setup. Click here to go
online for more information.
Chapter 7 Connect Your Printer
ENWW
8
Solve a problem
This section contains the following topics:
●
Jams and paper-feed issues
●
Ink cartridge issues
●
Printing issues
●
Copy issues
●
Scan issues
●
Network and connection issues
●
Printer hardware issues
●
HP support
Jams and paper-feed issues
What do you want to do?
Clear a paper jam
Solve paper jam
issues
NOTE:
Use an HP online troubleshooting wizard.
Instructions for clearing the jam in the printer or in the automatic document feeder and resolving issues with
paper or the paper feed.
The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for clearing paper jams
Paper jams can occur in several locations inside the printer.
CAUTION: To prevent possible damage to the printhead, clear paper jams as soon as possible.
To clear an internal paper jam
CAUTION: Avoid pulling jammed paper from the front of the printer. Instead follow the steps below to clear
the jam. Pulling out jammed paper from the front of the printer might cause the paper to tear and leave torn
pieces inside the printer; this could result in more jams later.
1.
Check the paper path inside the printer.
a.
ENWW
Open the cartridge access door.
Jams and paper-feed issues
43
44
b.
Remove the paper path cover.
c.
Lift the duplexer cover up and remove jammed paper.
d.
Reinsert the paper path cover. Make sure it snaps into place.
Chapter 8 Solve a problem
ENWW
2.
e.
Close the cartridge access door.
f.
Touch OK on the control panel to continue the current job.
If the problem is not resolved, check the print carriage area inside the printer.
CAUTION:
During the process, avoid touching the cable attached to the print carriage.
a.
Open the cartridge access door.
b.
If there is any jammed paper, move the print carriage to the far right of the printer, grasp the
jammed paper with both hands, and then pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and
wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to occur.
c.
Move the carriage to the far left of the printer, and do the same as in the previous step to remove
any torn pieces of paper.
d.
Close the cartridge access door.
e.
Touch OK on the control panel to continue the current job.
To get help from the print display, touch Help from the Home screen, touch How to Videos, and then
touch Clear Carriage Jam.
3.
If the problem is still not resolved, check the tray area.
a.
ENWW
Pull out the paper tray to extend it.
Jams and paper-feed issues
45
b.
Carefully turn the printer on its side to expose the bottom of the printer.
c.
Check the gap in the printer where the input tray was. If there is any jammed paper, reach into the
gap, grasp the paper with both hands and pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers and
wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all of the pieces of paper from the printer, more paper jams are likely to occur.
d.
Carefully turn the printer up again.
e.
Push the paper tray back in.
f.
Touch OK on the control panel to continue the current job.
Learn how to avoid paper jams
To help avoid paper jams, follow these guidelines.
46
●
Remove printed papers from the output tray frequently.
●
Make sure that you are printing with paper that is not wrinkled, folded, or damaged.
●
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
●
Do not use paper that is too thick or too thin for the printer.
●
Make sure that the trays are loaded correctly and are not too full. For more information, see Load media
on page 8.
●
Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
●
Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the
input tray must be the same size and type.
●
Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the paper-width
guides do not bend the paper in the input tray.
●
Do not force paper too far inside the input tray.
Chapter 8 Solve a problem
ENWW
●
If you are printing on both sides of a page, do not print highly saturated images on light weight paper.
●
Use paper types that are recommended for the printer. For more information, see Paper basics
on page 5.
●
If the printer is about to run out of paper, allow the printer to run out of paper first, and then add paper.
Do not load paper when the printer is printing.
Solve paper-feed problems
What kind of problem are you having?
●
●
●
Paper is not picked up from a tray
—
Make sure paper is loaded in the tray. For more information, see Load media on page 8. Fan the
paper before loading.
—
Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper guides are snug, but not tight, against the stack.
—
Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite direction of the
curl.
Pages are skewing
—
Make sure the paper loaded in the input tray is aligned to the paper-width guides. If needed, pull
out the input tray from the printer and reload the paper correctly, making sure that the paper
guides are aligned correctly.
—
Load paper into the printer only when it is not printing.
Multiple pages are being picked up
—
Make sure the paper-width guides are set to the correct markings in the tray for the paper size you
are loading. Also make sure the paper-width guides are snug, but not tight, against the stack.
—
Make sure the tray is not overloaded with paper.
—
Use HP paper for optimum performance and efficiency.
Ink cartridge issues
Fix ink cartridge problems
If an error occurs after a cartridge is installed, or if a message indicates a cartridge problem, try removing the
ink cartridges, verifying the protective piece of plastic tape has been removed from each ink cartridge, and
then reinserting the ink cartridges. If this does not work, clean the cartridge contacts. If the problem is still
not resolved, replace the ink cartridges. For information about replacing ink cartridges, see Replace the
cartridges on page 31.
To clean cartridge contacts
CAUTION: The cleaning procedure should take only a few minutes. Make sure that the ink cartridges are
reinstalled in the product as soon as possible. It is not recommended to leave the ink cartridges outside of the
product longer than 30 minutes. This could result in damage to the ink cartridges.
1.
ENWW
Check that power is on.
Ink cartridge issues
47
2.
Open the cartridge access door.
3.
Remove the cartridge indicated in the error message.
4.
Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts on the
ink cartridge. The electrical contacts are the small gold-colored dots on the ink cartridge.
5.
Feature
Description
1
Electrical contacts
Wipe only the contacts with a damp lint-free cloth.
CAUTION: Be careful to touch only the contacts, and do not smear any of the ink or other debris
elsewhere on the cartridge.
6.
On the inside of the printer, locate the contacts in the print carriage. The contacts look like a set of goldcolored bumps positioned to meet the contacts on the ink cartridge.
7.
Use a dry swab or lint-free cloth to wipe the contacts.
8.
Reinstall the ink cartridge.
9.
Close the access door, and check if the error message has gone away.
10. If you still receive the error message, turn the product off, and then on again.
NOTE: If one ink cartridge is causing problems, you can remove it and use the single-cartridge mode to
operate the HP ENVY 4520 series with only one cartridge.
Fix ink cartridge incompatible issues
The ink cartridge is not compatible with your printer. Replace it with a new ink cartridge. For more
information, see Replace the cartridges on page 31.
Printing issues
What do you want to do?
48
Chapter 8 Solve a problem
ENWW
Fix problems with page not printing (unable to print)
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue
automatically.
Troubleshoot problems with print
jobs not printing
Use an HP online troubleshooting wizard.
Get step-by-step instructions if the printer is not responding or printing.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Read general instructions in the Help for unable to print issues
Resolve print issues
Make sure that the printer is turned on and that there is paper in the tray. If you are still unable to print, try
the following in order:
1.
Check for error messages from the printer display and resolve them by following the onscreen
instructions.
2.
If your computer is connected to the printer with a USB cable, disconnect and reconnect the USB cable. If
your computer is connected to the printer with a wireless connection, confirm that the connection is
working.
3.
Verify that the printer is not paused or offline.
To verify that the printer is not paused or offline
a.
4.
Depending on your operating system, do one of the following:
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b.
Either double-click the icon for your printer or right-click the icon for your printer and select See
what’s printing to open the print queue.
c.
On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Offline.
d.
If you made any changes, try to print again.
Verify that the printer is set as the default printer.
To verify that the printer is set as the default printer
a.
ENWW
Depending upon your operating system, do one of the following:
Printing issues
49
b.
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
5.
c.
If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.
d.
Try using your printer again.
Restart the print spooler.
To restart the print spooler
a.
Depending upon your operating system, do one of the following:
Windows 8.1 and Windows 8
i.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click the
Settings icon.
ii.
Click or tap Control Panel, and then click or tap System and Security.
iii.
Click or tap Administrative Tools, and then double-click or double-tap Services.
iv.
Right-click or touch and hold Print Spooler, and then click Properties.
v.
On the General tab, next to Startup type, make sure that Automatic is selected.
vi.
If the service is not already running, under Service status, click or tap Start, and then click or
tap OK.
Windows 7
i.
From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.
ii.
Double-click Services.
iii.
Right-click the Print Spooler, and then click Properties.
iv.
On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click OK.
Windows Vista
50
i.
From the Windows Start menu, click Control Panel, System and Maintenance,
Administrative Tools.
ii.
Double-click Services.
iii.
Right-click the Print Spooler service, and then click Properties.
Chapter 8 Solve a problem
ENWW
iv.
On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click OK.
Windows XP
b.
i.
From the Windows Start menu, right click My Computer.
ii.
Click Manage, and then click Services and Applications.
iii.
Double-click Services, and then select Print Spooler.
iv.
Right-click Print Spooler, and click Restart to restart the service.
Try using your printer again.
6.
Restart the computer.
7.
Clear the print queue.
To clear the print queue
a.
Depending upon your operating system, do one of the following:
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to open the
Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and
Faxes.
b.
Double-click the icon for your printer to open the print queue.
c.
On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
confirm.
d.
If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.
e.
Check the print queue again to make sure it is clear, and then try to print again.
To check the power connection and reset the printer
1.
ENWW
Make sure the power cord is firmly connected to the printer.
Printing issues
51
1
Power connection to the printer
2
Connection to a power outlet
2.
Look inside the printer and check for a green light indicating the printer is receiving electrical power. If it
is not lit, make sure the cord is fully plugged into the printer, or connect to another power outlet.
3.
Look at the On button located on the printer. If it is not lit, the printer is turned off. Press the On button
to turn on the printer.
NOTE: If the printer is not receiving electrical power, connect it to another power outlet.
4.
With the printer turned on, disconnect the power cord from the side of the printer under the cartridge
access door.
5.
Unplug the power cord from the wall outlet.
6.
Wait at least 15 seconds.
7.
Plug the power cord back into the wall outlet.
8.
Reconnect the power cord to the side of the printer under the cartridge access door.
9.
If the printer does not turn on by itself, press the On button to turn on the printer.
10. Try using the printer again.
Fix print quality issues
Step-by-step instructions for resolving most print quality issues
Troubleshoot print quality issues online.
Read general instructions in the Help for resolving print quality issues
NOTE: To avoid print quality problems, always turn the printer off using the On button, and wait until the On
button light goes out before you pull the plug or turn off a power strip. This allows the printer to move the
cartridges to a capped position, where they are protected from drying out.
To improve print quality
1.
Make sure you are using original HP ink cartridges.
2.
Check the printer software to make sure you have selected the appropriate paper type from the Media
drop-down list and print quality from the Quality Settings drop-down list.
●
3.
52
In the printer software, click Print & Scan and then click Set Preferences to access the print
properties.
Check the estimated ink levels to determine if the cartridges are low on ink. For more information, see
Check the estimated ink levels on page 30. If the ink cartridges are low on ink consider replacing them.
Chapter 8 Solve a problem
ENWW
4.
Check the paper type.
For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For
more information, see Paper basics on page 5.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP
Advanced Photo Paper.
Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool,
dry place. When you are ready to print, remove only the paper you plan to use immediately. When you
have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper
from curling.
5.
Align the cartridges.
To align the cartridges from the printer software
NOTE: Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align
the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge,
the HP All-in-One will not prompt you to align the ink cartridges. The HP All-in-One remembers the
alignment values for that ink cartridge, so you do not need to realign the ink cartridges.
ENWW
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c.
In the printer software, click Print & Scan , and then click Maintain Your Printer to access the
Printer Toolbox.
d.
In Printer Toolbox, click Align Ink Cartridges on the Device Services tab. The printer prints an
alignment sheet.
e.
Load the cartridge alignment sheet print side down on the right front corner of the scanner glass.
f.
Follow the instructions on the printer display to align the cartridges. Recycle or discard the
cartridge alignment sheet.
Printing issues
53
To align the cartridges from the printer display
6.
a.
Load Letter or A4 unused plain white paper into the input tray.
b.
From the printer control panel display, touch Tools .
c.
Touch Align Printer, and then follow the on-screen instructions.
Print a diagnostics page if the cartridges are not low on ink.
To print a diagnostics page from the printer software
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c.
In the printer software, click Print & Scan , and then click Maintain Your Printer to access the
printer toolbox.
d.
Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page. Review
the blue, magenta, yellow, and black boxes on the diagnostics page. If you are seeing streaks in the
color and black boxes, or no ink in portions of the boxes, then automatically clean the cartridges.
To print a diagnostics page from the printer display
7.
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
From the printer control panel, touch Tools .
c.
Touch Print Quality Report.
Clean the ink cartridges automatically, if the diagnostic page shows steaks or missing portions of the
color and black boxes.
To clean the cartridges from the printer software
54
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select
All Programs, click HP, click the folder for the printer, and then select the icon with the
printer's name.
c.
In the printer software, click Print & Scan and then click Maintain Your Printer to access the
Printer Toolbox.
d.
Click Clean Ink Cartridges on the Device Services tab. Follow the on-screen instructions.
Chapter 8 Solve a problem
ENWW
To clean the cartridges from the printer display
a.
Load Letter or A4 unused plain white paper into the input tray.
b.
From the printer control panel display, touch Tools .
c.
Touch Clean Cartridges, and then follow the on-screen instructions.
If cleaning the cartridges does not solve the problem, contact HP support. Go to www.hp.com/support .
This website provides information and utilities that can help you correct many common printer
problems. If prompted, select your country/region, and then click All HP Contacts for information on
calling for technical support.
To improve print quality (OS X)
1.
Make sure you are using original HP cartridges.
2.
Make sure you have selected the appropriate paper type and print quality in the Print dialog.
3.
Check the estimated ink levels to determine if the cartridges are low on ink.
Consider replacing the print cartridges if they are low on ink.
4.
Check the paper type.
For best print quality, use high quality HP paper, or papers that adhere to the ColorLok® standard. For
more information, see Paper basics on page 5.
Always make sure the paper you are printing on is flat. For best results when printing images, use HP
Advanced Photo Paper.
Store specialty paper in its original packaging inside a resealable plastic bag on a flat surface in a cool,
dry place. When you are ready to print, remove only the paper you plan to use immediately. When you
have finished printing, return any unused photo paper to the plastic bag. This prevents the photo paper
from curling.
5.
Align the printer cartridges.
To align print cartridges from the software
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
6.
ENWW
c.
Select the HP ENVY 4520 series from the list of devices at the left of the window.
d.
Click Align.
e.
Click Align and follow the on-screen instructions.
f.
Click All Settings to return to the Information and Support pane.
Print a test page.
Printing issues
55
To print a test page
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
c.
Select the HP ENVY 4520 series from the list of devices at the left of the window.
d.
Click Test Page.
e.
Click the Print Test Page button, and follow the on-screen instructions.
Check the test page for jagged lines in the text or streaks in the text and colored boxes. If you are
seeing jagged lines, or streaks, or no ink in portions of the boxes, then automatically clean the
cartridges.
7.
If the diagnostic page shows steaks or missing portions of the text or colored boxes, clean the print
cartridges automatically.
To automatically clean the print head
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
c.
Select the HP ENVY 4520 series from the list of devices at the left of the window.
d.
Click Clean Printheads.
e.
Click Clean, and follow the on-screen instructions.
CAUTION: Clean the print head only when necessary. Unnecessary cleaning wastes ink and
shortens the life of the print head.
NOTE: If print quality still seems poor after you complete cleaning, try aligning the printer. If
print quality problems persist after cleaning and aligning, contact HP support.
f.
Click All Settings to return to the Information and Support pane.
Fix ink smears on printouts
If a printout shows smears of ink, for subsequent prints, try using the Clean Ink Smear function from the
printer display. This process takes several minutes to complete. Full-size plain paper needs to be loaded and
will be moved back and forth during the cleaning. Mechanical noises are normal at this time.
1.
Load Letter or A4 unused plain white paper into the input tray.
2.
From the printer control panel display, touch Tools .
3.
Touch Clean Page Smears, and then follow the on-screen instructions.
NOTE: You can also do the same from the HP printer software or embedded web server (EWS). To access the
software or EWS, see Open the HP printer software (Windows) on page 11 or Open the embedded Web server
on page 41.
56
Chapter 8 Solve a problem
ENWW
Copy issues
Troubleshoot copy problems
Use an HP online troubleshooting wizard.
Get step-by-step instructions if the printer does not create a copy, or if your printouts are low quality.
NOTE:
The HP online troubleshooting wizards may not be available in all languages.
Tips for copy and scan success on page 25
Scan issues
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Solve scan problems
Use an HP online troubleshooting wizard.
Get step-by-step instructions if you cannot create a scan or if your scans are low quality.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Tips for copy and scan success on page 25
Network and connection issues
What do you want to do?
Fix wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Use an HP online
troubleshooting wizard
●
Troubleshoot your wireless problem, whether your printer has never been connected or it was
connected and is no longer working.
●
Troubleshoot a firewall or antivirus issue, if you suspect that it is preventing your computer
from connecting to the printer.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Read general instructions in the Help for wireless troubleshooting
Check the network configuration or print the wireless test report to assist in diagnosing network connection
issues.
ENWW
1.
From the printer control panel, touch
2.
Touch Print Reports. and then touch Network Configuration Page or Wireless Test Report.
( Wireless ), and then touch
( Settings ).
Copy issues
57
Find network settings for wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that can tell you the network name (SSID) and
password (network key).
Use an HP online troubleshooting wizard
Learn how to find your network name (SSID) and wireless password.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be available in all
languages.
Fix Wi-Fi Direct connection
Use an HP online troubleshooting wizard
NOTE:
Troubleshoot your Wi-Fi Direct problem or learn how to configure Wi-Fi Direct.
The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for Wi-Fi Direct troubleshooting
1.
Check the printer to confirm that Wi-Fi Direct is turned on:
a.
From the printer control panel, touch
b.
If Status is Off, touch
(Wi-Fi Direct).
(Wi-Fi Direct Settings) and turn Wi-Fi Direct on.
2.
From your wireless computer or mobile device, turn on the Wi-Fi connection, and then search for and
connect to the Wi-Fi Direct name of your printer.
3.
Enter the Wi-Fi Direct password when prompted.
4.
If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/global/us/en/eprint/mobile_printing_apps.html.
Printer hardware issues
TIP: Run the HP Print and Scan Doctor to diagnose and automatically fix printing, scanning, and copying
issues. The application is only available in some languages.
The printer shuts down unexpectedly
58
●
Check the power and power connections.
●
Make sure the printer's power cord is connected firmly to a functioning power outlet.
Chapter 8 Solve a problem
ENWW
The cartridge access door is open
●
Close the cartridge access door to begin printing.
Cartridges alignment fails
●
If the alignment process fails, make sure you have loaded unused, plain white paper into the input tray.
If you have colored paper loaded in the input tray when you align the ink cartridges, the alignment fails.
●
If the alignment process fails repeatedly, you may need to clean the printhead, or you might have a
defective sensor.
●
If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/support .
This website provides information and utilities that can help you correct many common printer
problems. If prompted, select your country/region, and then click All HP Contacts for information on
calling for technical support.
Resolve printer failure
▲
Turn the printer off, then on. If that does not resolve the problem, contact HP.
For more information about contacting HP support, see HP support on page 59.
HP support
For the latest product updates and support information, visit the HP ENVY 4520 series support website at
www.hp.com/support. HP online support provides a variety of options for help with your printer:
Drivers & downloads: Download software drivers and updates, as well as product manuals and documentation
that came in the box with your printer.
HP support forums: Visit HP Support Forums for answers to common questions and issues. You can view
questions posted by other HP customers, or sign in and post your own questions and comments.
Troubleshooting: Use HP online tools to detect your printer and find recommended solutions.
Contact HP
If you need help from an HP technical support representative to solve a problem, visit the Contact Support
website. The following contact options are available at no cost for in-warranty customers (HP agent-assisted
support for out-of warranty customers may require a fee):
ENWW
HP support
59
Chat with an HP support agent online.
Call an HP support agent.
When contacting HP support, be prepared to provide the following information:
●
Product name (Located on the printer, such as HP ENVY 4520)
●
Product number (located inside the cartridge access door)
●
Serial number (located on the back or bottom of the printer)
Register printer
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support, and
product support alerts. If you did not register your printer while installing the software, you can register now
at http://www.register.hp.com.
Additional warranty options
Extended service plans are available for the HP ENVY 4520 series at additional costs. Go to www.hp.com/
support , select your country/region and language, then explore the extended warranty options available for
your printer.
60
Chapter 8 Solve a problem
ENWW
A
Technical information
The technical specifications and international regulatory information for the HP ENVY 4520 series are
provided in this section.
For additional specifications, see the printed documentation that came with the HP ENVY 4520 series.
This section contains the following topics:
●
Hewlett-Packard Company notices
●
Specifications
●
Environmental product stewardship program
●
Regulatory information
Hewlett-Packard Company notices
The information contained herein is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior
written permission of Hewlett-Packard, except as allowed under the copyright laws. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
© 2015 Hewlett-Packard Development Company, L.P.
Microsoft®, Windows ®, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, and Windows® 8.1 are U.S.
registered trademarks of Microsoft Corporation.
Specifications
Technical specifications for the HP ENVY 4520 series are provided in this section. For more product
specifications, see the Product Data Sheet at www.hp.com/support .
●
System requirements
●
Environmental specifications
●
Print specifications
●
Scan specifications
●
Copy specifications
●
Cartridge yield
●
Print resolution
●
Acoustic information
System requirements
Software and system requirements are located in the Readme file.
ENWW
Hewlett-Packard Company notices
61
For information about future operating system releases and support, visit the HP online support website at
www.hp.com/support .
Environmental specifications
●
Recommended operating temperature range: 15ºC to 32ºC (59ºF to 90ºF)
●
Allowable operating temperature range: 5ºC to 40ºC (41ºF to 104ºF)
●
Humidity: 20% to 80% RH non-condensing (recommended); 25ºC maximum dewpoint
●
Non-operating (Storage) temperature range: –40ºC to 60ºC (-40ºF to 140ºF)
●
In the presence of high electromagnetic fields, it is possible the output from the HP ENVY 4520 series
may be slightly distorted.
●
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected
noise due to potential high electromagnetic fields.
Print specifications
●
Print speeds vary according to the complexity of the document.
●
Method: drop-on-demand thermal inkjet
●
Language: PCL3 GUI
Scan specifications
●
Optical Resolution: up to 1200 dpi
●
Hardware Resolution: up to 1200 x 1200 dpi
●
Enhanced Resolution: up to 1200 x 1200 dpi
●
Bitdepth: 24-bit color, 8-bit grayscale (256 levels of gray)
●
Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
●
Supported File Types: BMP, JPEG, PNG, TIFF, PDF
●
Twain Version: 1.9
Copy specifications
●
Digital image processing
●
Maximum number of copies varies by model.
●
Copy speeds vary according to the complexity of the document and model.
Cartridge yield
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Print resolution
For a list of supported print resolutions, visit the HP ENVY 4520 series support website at www.hp.com/
support.
For information about printing using maximum dpi, see Print using the maximum dpi on page 17.
62
Appendix A Technical information
ENWW
Acoustic information
If you have Internet access, you can access acoustic information from the HP website.
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. Design for
recycling has been incorporated into this product. The number of materials has been kept to a minimum while
ensuring proper functionality and reliability. Dissimilar materials have been designed to separate easily.
Fasteners and other connections are easy to locate, access, and remove using common tools. High priority
parts are designed for efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment website at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html.
This section contains the following topics:
●
Eco-Tips
●
Paper use
●
Plastics
●
Material safety data sheets
●
HP inkjet supplies recycling program
●
Power consumption
●
Disposal of waste equipment by users
●
Chemical substances
●
Battery disposal in Taiwan
●
Battery notice for Brazil
●
California Perchlorate Material Notice
●
EPEAT
●
European Union Commission Regulation 1275/2008
●
The Table of Hazardous Substances/Elements and their Content (China)
●
Restriction of hazardous substance (Ukraine)
●
Restriction of hazardous substance (India)
●
China Energy Label for Printer, Fax and Copier
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP
Environmental Programs and Initiatives website for more information on HP’s environmental initiatives.
www.hp.com/hpinfo/globalcitizenship/environment/
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
ENWW
Environmental product stewardship program
63
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP website at:
www.hp.com/go/msds
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in
many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more
information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is certified by the U.S.
Environmental Protection Agency. The following mark will appear on ENERGY STAR certified imaging
products:
Additional ENERGY STAR certified imaging product model information is listed at: www.hp.com/go/energystar
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead,
you should protect human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste electrical and electronic
equipment. For more information, please contact your household waste disposal service, or
go to http://www.hp.com/recycle.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products
as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: www.hp.com/go/
reach.
64
Appendix A Technical information
ENWW
Battery disposal in Taiwan
Battery notice for Brazil
California Perchlorate Material Notice
EPEAT
European Union Commission Regulation 1275/2008
For product power data, including the power consumption of the product in networked standby if all wired
network ports are connected and all wireless network ports are activated, please refer to section P14
‘Additional Information’ of the product IT ECO Declaration at www.hp.com/hpinfo/globalcitizenship/
environment/productdata/itecodesktop-pc.html.
ENWW
Environmental product stewardship program
65
The Table of Hazardous Substances/Elements and their Content (China)
Restriction of hazardous substance (Ukraine)
Restriction of hazardous substance (India)
66
Appendix A Technical information
ENWW
China Energy Label for Printer, Fax and Copier
Regulatory information
The printer meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
ENWW
Regulatory information
67
●
Regulatory model identification number
●
FCC statement
●
Notice to users in Korea
●
VCCI (Class B) compliance statement for users in Japan
●
Notice to users in Japan about the power cord
●
Noise emission statement for Germany
●
GS Statement (Germany)
●
Declaration of conformity
●
Notice to users of the U.S. telephone network: FCC requirements
●
Notice to users of the Canadian telephone network
●
Notice to users of the German telephone network
●
Regulatory information for wireless products
—
Exposure to radio frequency radiation
—
Notice to users in Brazil
—
Notice to users in Canada
—
Notice to users in Taiwan
—
Notice to users in Mexico
—
Notice to users in Japan
—
Notice to users in Korea
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory
Model Number for your product is SDGOB-1501. This regulatory number should not be confused with the
marketing name (HP ENVY 4520 All-in-One series, etc.) or product numbers (F0V63 to F0V74, etc.).
68
Appendix A Technical information
ENWW
FCC statement
Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
ENWW
Regulatory information
69
Notice to users in Japan about the power cord
Noise emission statement for Germany
GS Statement (Germany)
70
Appendix A Technical information
ENWW
Declaration of conformity
ENWW
Regulatory information
71
Notice to users of the U.S. telephone network: FCC requirements
72
Appendix A Technical information
ENWW
Notice to users of the Canadian telephone network
Notice to users of the German telephone network
Regulatory information for wireless products
This section contains the following regulatory information pertaining to wireless products:
ENWW
●
Exposure to radio frequency radiation
●
Notice to users in Brazil
●
Notice to users in Canada
●
Notice to users in Taiwan
Regulatory information
73
●
Notice to users in Mexico
●
Notice to users in Japan
●
Notice to users in Korea
Exposure to radio frequency radiation
Notice to users in Brazil
74
Appendix A Technical information
ENWW
Notice to users in Canada
Notice to users in Taiwan
ENWW
Regulatory information
75
Notice to users in Mexico
Notice to users in Japan
Notice to users in Korea
76
Appendix A Technical information
ENWW
Index
A
accessibility
J
jams
clear 43
paper to avoid
2
B
both sides, print on 15
buttons, control panel 4
L
lights, control panel 4
C
connectors, locating 4
control panel
buttons 4
features 4
lights 4
status icons 5
copy
specifications 62
customer support
warranty 60
M
media
duplexing 15
multi-feeds, troubleshoot 47
N
networks
connector illustration 4
IP settings 39
settings, change 39
wireless communication setup
35
D
double-sided printing 15
E
embedded web server
Webscan 23
environment
Environmental product
stewardship program 63
environmental specifications
G
glass, scanner
locating 3
H
Help button 5
HP Utility (OS X)
opening 40
I
ink cartridges 4
IP settings 39
ENWW
8
O
OS X
HP Utility 40
output tray
locating 3
62
P
paper
clear jams 43
HP, order 7
selecting 7
skewed pages 47
troubleshoot feeding 47
paper-feed problems, troubleshoot
47
power
troubleshoot 58
power input, locating 4
print
double-sided 15
specifications 62
troubleshoot 58
printer control panel
locating 3
network settings 39
printer software (Windows)
about 40
opening 11, 40
R
radio interference
regulatory information 73
rear access panel
illustration 4
recycle
ink cartridges 64
regulatory information 67, 73
regulatory notices
regulatory model identification
number 68
S
scan
from Webscan 23
scan specifications 62
scanner glass
locating 3
settings
network 39
skew, troubleshoot
print 47
software
Webscan 23
status icons 5
system requirements 61
T
technical information
copy specifications 62
environmental specifications
print specifications 62
scan specifications 62
system requirements 61
trays
clear paper jams 43
locating 3
Index
62
77
paper-width guides illustration
3
troubleshoot feeding 47
troubleshoot
multiple pages are picked 47
paper not picked up from tray
47
paper-feed problems 47
power 58
print 58
skewed pages 47
two-sided printing 15
U
USB connection
port, locating
3, 4
W
warranty 60
Webscan 23
websites
accessibility information 2
wireless communication
regulatory information 73
set up 35
78
Index
ENWW