MAX® PATCH PANELS
Panels can be mounted directly to fit a
standard 19 inch rack or cabinet
Available in 16-, 24- and
48-port configurations
Modules utilize Siemon’s coloured icons for
easy identification and administration
Bold port numbering
enables quick and ready
identification of outlets
Write-on area
provided for
panel designation
Multimedia capability — mix
and match many different
types of connectors
High density design
accommodates up to 24 ports
per RMS
[1 RMS = 44.5mm]
Lightweight, high strength brushed
aluminium with black protective finish
Technical Tip!
Use flat MAX modules for patch
panel applications
Individual modules snap into place
from front or rear of panel for added
installation flexibility
Removable designation labels can be laser
printed and enable proper circuit identification
for each port
Rear cable management bar included for routing
horizontal cables to terminations
W W W
.
S I E M O N
.
C O M
MODULAR PATCHING
MAX patch panels provide a flexible, high density termination solution for the
telecommunications room. Using the full line of MAX modules (available
separately), the panel can be configured for a variety of multimedia
applications. Blank modules can be used to reserve ports for future capacity.
MAX® Series Patch Panel:
MX-PNL-16........................................16-port panel, 1 RMS
MX-PNL-24........................................24-port panel, 1 RMS
MX-PNL-48........................................48-port panel, 2 RMS
MAX Panels not compatible with shielded MAX modules. Use the TERA™-MAX panel.
Note: 1 RMS = 44.5mm
Labeling Accessories:
The MAX S89D offers an economical
solution for smaller applications while
allowing for a range of different media
using the full line of MAX modules.
MX-89D-12..................12-port Max panel
mounted on an 89D
bracket
height: 254.0mm
width: 85.9mm
depth: 47.8mm
MX-PNL-LBL4**.............10 sheets of laser printable labels for
16-port MAX panel
MX-PNL-LBL6**.............10 sheets of laser printable labels for
24- and 48-port MAX panel
Fibre Management Trays (FMT):
**Visit our web site or contact our Technical Support
Department for labeling software.
Siemon Fibre Management Trays are an economical solution
for managing fibre slack and splice trays. the management
trays have been designed to easily retrofit any standard 1, 2,
or 3 MAX series patch panel and can organize up to 96 fibres.
CT-FMT-16....................Fibre tray for 16 and 24-port MAX
patch panel, 1 RMS
CT-FMT-32....................Fibre tray for 48-port MAX patch panel,
2 RMS
Because we are continuously improving our products, The Siemon Company
reserves the right to change specifications and availability without prior notice.
CT® , MAX®, 10G 6™ and TERA™ are trademarks of The Siemon Company
Siemon — EMEA HQ & UK
United Kingdom
Tel: +44 (0) 1483 480040
W W W
.
S I E M O N
Siemon — France
Paris
Tel: +33 1 46 46 11 85
.
C O M
Reusable Hook and Loop Cable Managers:
VCM-25-(XXX)-(X) ........Roll of 25 cable managers
VCM-250-(XXX)-(X) ......Spool of 250 cable managers
Use (XXX) to specify length:
06 = 152mm, holds 51mm diameter cable bundle
12 = 305mm, holds 102mm diameter cable bundle
18 = 457mm, holds 153mm diameter cable bundle
Use (X) to specify colour: 1 = black, 2 = white, 3 = red, 4 = grey,
5 = yellow, 6 = blue, 7 = green, 9 = orange
For related product information request Spec Sheet(s):
MAX Modules Tool-less (PROD-SS-MXM)
MAX 5e Module Punch-down (PROD-SS-MPD)
MAX 6 Modules (PROD-SS-MX6)
10G 6™ MAX Modules (PROD-SS-MX6U)
Fiber Management Tray (PROD-SS-CTF)
Siemon — Deutschland
Frankfurt
Tel: +49 (0) 69 97168 184
Siemon — Italia
Milano
Tel: +39 (02) 64 672 209
PROD-SS-MXP Rev. G 4/03
S89D Bracket:
© 2003 The Siemon Company
MODULAR PATCHING
O R D E R I N G I N F O R M AT I O N