Solid Top (S3) Symmetrical Slotted Shielding

Attenuation (dB )
Solid Top (S3) Symmetrical
Slotted Shielding
Innovative Technology
for a Connected World
Fingerstock Gaskets
97-910
97-913
97-915
97-916
97-918
97-910
97-910
97-910
97-919
SOLID TOP S3 SERIES - STICKY FINGERS
FINGERSTOCK
GASKETS
ANDK METAL
GROUNDING PRODUCTS
SERIES
A
B
C
D
E
L
APPROX.
97-913
97-913
97-913
MIN.
L ENGTH
As
the 0.620
world’s
leading
fabricator
of0.760
fingerstock,
Laird Technologies has developed highly
97-910
0.220
0.004
0.375
0.030
0.100
15.000
(15.748)
(5.588)
(0.102)
(9.525)
(0.762)
(19.304)
(2.540)
(381.000)
sophisticated, and often proprietary, shielding and grounding technology.
97-915
0.450
(11.430)
0.140
(3.556)
0.003
(0.076)
0.250
(6.350)
0.022
(0.559)
0.510
(12.954)
0.070
(1.,778)
Our innovations are necessary to achieve outstanding combinations of performance parameters.
97-918
0.350
0.110
0.003
0.187
0.018
0.380
0.070
15.000
97-916
97-916
From a(8.890)
vast (2.794)
selection
product
platings and mounting techniques, to a full range
(0.076) of(4.750)
(0.457) configurations,
(9.652)
(1.778)
(381.000)
97-916
of
low
compression
force
requirements
and
high
transfer
impedance
characteristics,
there
is
a
SOLID TOP S SERIES - RIVET MOUNT
97-918
97-918
SERIES
A
B
C
D gasket
E
Kor grounding
L
APPROX.
Mproduct
N
NO.just
OF
Laird
Technologies
right for the job.
97-918
< View A - Computer tower side
panel is moved sideways during the
first step of installation.
3
MIN.
L ENGTH
RIVETS
97-913 0.620 0.220 0.004 0.375 0.030 0.760 0.100
15.000 0.560 0.940
10
97-919
Laird
Technologies
offers
their(2.540)
Solid
Top
Symmetrical
Slotted Shielding Gaskets. This product is 97-919
(15.748)
(5.588) (0.102) (9.525)
(0.762) (19.304)
(381.000)
(14.224)
(23.876)
—
97-919
uniquely
for0.022
those
a10 lid orSOLID
cover
closed
using
a sliding motion to
97-916 0.450 designed
0.140 0.003 0.250
0.510 applications
0.070
15.000 0.630where
0.880
TOP is
S SERIES
- STICKY
FINGERS
SOLID
FINGERS
(11.430) (3.556) (0.076) (6.350) (0.559) (12.954) (1.778) (381.000) (16.002) (22.352)
—
SOLID TOP
TOP SS SERIES
SERIES -- STICKY
STICKYperpendicularly
FINGERS
complete
the closure. The solid top
design allows
the cover
or
SERIES to Aslide either
B
C
D
E
K parallel
L
APPROX.
SERIES
A
B
C
D
E
K
L
APPROX.
97-919 0.350 0.110 0.003 0.187 0.018 0.380 0.070
15.000 0.660 0.840
10
SERIES
B
C
D
E
K
L
APPROX.
MAIN.
L ENGTH
M
IN.
L ENGTH
(2.794) (0.076) (4.750)
(0.457) (9.652)
(1.778) (381.000)
(21.336)
to the(8.890)
fingerstock
without
snagging
or(16.764)
damaging
the gasket.
The
newly
designed
symmetrical
MIN.
L ENGTH
97-910
0.620
0.220
0.004
0.375
0.030
0.760
0.100
15.000
97-910
0.620
0.220
0.004
0.375
0.030
0.760
0.100
15.000
97-910
0.620
0.220
0.004
0.375
0.030
0.760
0.100
15.000
3
(15.748)
(5.588)
(0.102)
(9.525)
(0.762)
(19.304)
(2.540)
(381.000)
shielding offers all the advantages of our S series, having a large
for maximum
(15.748) radius
(5.588)
(0.102)
(9.525)
(0.762)conductivity
(19.304)
(2.540)
(381.000)
(15.748)
(5.588)
(0.102)
(9.525)
(0.762)
(19.304)
(2.540)
(381.000)
RETENTION CLIP
PART NO.
RIVET MOUNT PART NO.
97-915
0.450
0.140
0.003
0.250
0.022
0.510
0.070
15.000
97-915
0.450
0.140
0.003
0.250
0.022
0.510
0.070
15.000
with minimum
compression
forces.
97-915
0.450
0.140
0.003
0.250
0.022
0.510
0.070
15.000
(11.430)
(3.556)
(0.076)
(6.350)
(0.559)
(12.954)
(1.,778)
(381.000)
97- 964
Us ed On
97- 919
(11.430)
(3.556)
(0.076)
(6.350)
(0.559)
(12.954)
(1.,778)
(381.000)
3
3
3
< View B - Next, the panel is moved
downwards, sliding longitudinally on
the vertical finger gasket.
< View
View A - Computer tower side
<
A
tower side
<
View
A -- Computer
Computer
side
panel
is moved
sidewaystower
during
the
panel is moved sideways during the
97- 965
< View C - Fully installed panel is
Us ed On
97-918
Us ed On
97- 913
A
MIN.
97-913 0.620
97-913 0.620
97-913 (15.748)
0.620
(15.748)
(15.748)
97-916 0.450
97-916 0.450
97-916 (11.430)
0.450
(11.430)
(11.430)
97-919 0.350
97-919 0.350
97-919 (8.890)
0.350
(8.890)
(8.890)
Double
Adhesive
Tape
160
140
C
L
Smallest
Opening
< View
View B - Next, the panel is moved
<
Next, the
<
View BB --sliding
the panel
panel is
is moved
moved
downwards,
longitudinally
on
View
BNext, longitudinally
downwards,
sliding
on
Rivet
Fully installed panel is now
compressing both finger gaskets.
97-919
97-916
97-913
10K
100K
1M
10M
100M
RETENTION CLIP
1G
The above picture shows our Solid Top S3 with a
TM
tnetu
n
otn
(B
d(B
AA
ttetA
)d)B )
teauntaiuotian
i(odn
All dimensions shown are in inches (millimeters) unless otherwise specified.
USA: +1.866.928.8181
Europe: +49.0.8031.2460.0
Asia: +86.755.2714.1166
160
160
160
140
140
140
120
120
120
100
100
100
80
80
80
60
60
60
40
40
40
20
20
20
0
0 10K
0
10K
10K
SOLID TOP S33 TRANSFER IMPEDANCE
retention clip. This
clip is designed to ensure secure
SOLID
SOLID TOP
TOP SS3 TRANSFER
TRANSFER IMPEDANCE
IMPEDANCE
retention of actual fingerstock to track component.
0.760
0.760
0.760
(19.304)
(19.304)
(19.304)
0.510
0.510
0.510
(12.954)
(12.954)
(12.954)
0.380
0.380
0.380
(9.652)
(9.652)
(9.652)
0.100
0.100
0.100
(2.540)
(2.540)
(2.540)
0.070
0.070
0.070
(1.778)
(1.778)
(1.778)
0.070
0.070
0.070
(1.778)
(1.778)
(1.778)
APPROX.
APPROX.
APPROX.
L ENGTH
L ENGTH
L15.000
ENGTH
15.000
15.000
(381.000)
(381.000)
(381.000)
15.000
15.000
15.000
(381.000)
(381.000)
(381.000)
15.000
15.000
15.000
(381.000)
(381.000)
(381.000)
Us ed On
Us ed On
(381.000)
15.000
15.000
15.000
(381.000)
(381.000)
(381.000)
M
M
M
0.560
0.560
0.560
(14.224)
(14.224)
(14.224)
0.630
0.630
0.630
(16.002)
(16.002)
(16.002)
0.660
0.660
0.660
(16.764)
(16.764)
(16.764)
N
N
N
0.940
0.940
0.940
(23.876)
(23.876)
(23.876)
0.880
0.880
0.880
(22.352)
(22.352)
(22.352)
0.840
0.840
0.840
(21.336)
(21.336)
(21.336)
NO. OF
NO. OF
NO.
RIVEOF
TS
RIVETS
RI10
VETS
10
10
—
—
—
10
10
10
—
—
—
10
10
10
K
97- 916
97- 916
97- 913
97- 913
97- 913
0.195
0.195
(4.953)
0.195
(4.953)
Rachet Type
(4.953)
Rachet
Type
Standard
Rachet
Type
Standard
Standard
®
K
A
• AvailableAAKKK in standard or UltraSoft
K
A
0.285
A
B
B
0.285
(7.239)
B
B
0.285
(part
numbers
beginning
with
-98)
versions
B
(7.239)
B
Push
L
(7.239)
Double
Double
Adhesive
Double
Adhesive
Tape
Adhesive
Tape
Tape
C
C
C
L
L
Smallest
L
Smallest
Opening
Smallest
Opening
Push
Rivet
Push
Rivet
Rivet
Opening
1.500
1.500
(38.100)
1.500
(38.100)
(38.100)
L
Smallest
L
Smallest
Opening
Smallest
Opening
M Opening
N
M
N
M
N
Tapered Type
Tapered
Type
Optional
Tapered
Type
Optional
Optional
1.500
1.500
(38.100)
1.500
(38.100)
(38.100)
97-919
97-919
97-916
97-919
97-916
97-913
97-916
97-913
97-913
100K
100K
100K
1M
10M
1M
10M
1MFrequency (Hz) 10M
Frequency (Hz)
Frequency (Hz)
All dimensions shown are in inches (millimeters) unless otherwise specified.
All dimensions shown are in inches (millimeters) unless otherwise specified.
All dimensions shown are in inches (millimeters) unless otherwise specified.
www.lairdtech.com
0.030
0.030
0.030
(0.762)
(0.762)
(0.762)
0.022
0.022
0.022
(0.559)
(0.559)
(0.559)
0.018
0.018
0.018
(0.457)
(0.457)
(0.457)
A
Frequency (Hz)
global solutions: local support
0.375
0.375
0.375
(9.525)
(9.525)
(9.525)
0.250
0.250
0.250
(6.350)
(6.350)
(6.350)
0.187
0.187
0.187
(4.750)
(4.750)
(4.750)
• For longitudinal sliding applications,
D
D
D
D
a retention clipDD is recommended
for
E
E
secure mounting
E
E
E
E
20
0
0.004
0.004
0.004
(0.102)
(0.102)
(0.102)
0.003
0.003
0.003
(0.076)
(0.076)
(0.076)
0.003
0.003
0.003
(0.076)
(0.076)
(0.076)
7- 966
Us ed On
• Parts 999can
cut
7- 966 be modifiedUsand/or
ed On
7- 966
Us ed On
to any specific length
1.500
(38.100)
now compressing both finger gaskets.
60
0.220
0.220
0.220
(5.588)
(5.588)
(5.588)
0.140
0.140
0.140
(3.556)
(3.556)
(3.556)
0.110
0.110
0.110
(2.794)
(2.794)
(2.794)
97- 965
97- 965
< View
View C - Fully installed panel is
<
C
installed
panel is
<
View
C -- Fully
installed
is
now
compressing
both
fingerpanel
gaskets.
View
CFullyboth
now
compressing
finger gaskets.
80
(1.,778)
0.070
0.070
0.070
(1.778)
(1.778)
(1.778)
• Generous radii provide maximum
RETENTION CLIP
PART NO.
RIVET MOUNT PART NO.
RETENTION CLIP
PART NO.
RIVET MOUNT PART NO.
conductivity
with minimum
RETENTION CLIP
PART NO.
RIVET MOUNT PART NO.
97- 964
Us ed On
97- 919
97- 964
97- 919
compression
forces UUUssseeeddd OOOnnn
97- 964
97- 919
97- 965
97- 916
Smallest
Tapered Type
downwards,
sliding longitudinally
Opening
Optional
M
N finger gasket.
on the vertical
1.500
(38.100)
(12.954)
0.380
0.380
0.380
(9.652)
(9.652)
(9.652)
• Available with two types of rivets
120
100
(0.559)
0.018
0.018
0.018
(0.457)
(0.457)
(0.457)
• Offered in both rivet mount and tape
mount versions
Rachet Type
Standard
downwards,
slidinggasket.
longitudinally on0.285
the vertical finger
the
vertical
finger
gasket.
panel
is moved (7.239)
theNext,
verticalthe
finger
gasket.
Push
L
B
B
SOLID TOP S3 TRANSFER IMPEDANCE
(6.350)
0.187
0.187
0.187
(4.750)
(4.750)
(4.750)
3
K
A
K
(0.076)
0.003
0.003
0.003
(0.076)
(0.076)
(0.076)
SOLID TOP S33 SERIES - RIVET MOUNT
(4.953)
E
E
(3.556)
0.110
-- RIVET
TOP
SS SERIES
•SOLID
Solid
provides
an Eadditional
SERIES
RIVET MOUNT
MOUNT
SOLID
TOPtop
SERIES
A
B
C
D
K
L
SERIES
A
B
C
D
E
K
L
SERIES
B
C
D effectiveness
E
K
L
10 dB
MAIN.of shielding
MIN.
Computer tower side panel is
moved sideways during the
first step ofDinstallation. 0.195
D
(11.430)
0.350
97-918
0.350
0.110
97-918
0.350
0.110
(8.890)
(2.794)
FEATURES
(8.890)
(2.794)
(8.890)
(2.794)
97- 916
panel
is moved
A sideways during the
firstView
step
of installation.
first
first step
step of
of installation.
installation.
97- 966
now compressing both finger gaskets.
40
97-915
97-915
97-915
15.000
(381.000)
100M
100M
100M
1G
1G
1G
RETENTION CLIP
RETENTION CLIP
RETENTION CLIP
The above picture shows our Solid Top S33 with a
The
picture shows
our
Top
with aa
The above
above
our Solid
Solid
Top SS3 with
retention
clip. picture
This clipshows
is designed
to ensure
secure
retention
clip. This
is
to
secure
retention
This clip
clip
is designed
designed
to ensure
ensure
secure
retention clip.
of actual
fingerstock
to track
component.
retention
retention of
of actual
actual fingerstock
fingerstock to
to track
track component.
component.
(8
the vertical finger gasket.
97-916
RET
Solid Top (S3) Symmetrical
<
Slotted
Shielding
97-918
View C - Fully installed panel is 97-919
now compressing both finger gaskets.
SOLID TOP S3 SERIES - STICKY FINGERS
Innovative Technology
for a Connected World
SERIES
B
C
0.220
(5.588)
97-915
0.450
(11.430)
0.140
(3.556)
97-918
0.350
(8.890)
0.110
0.003
0.187
(2.794)
(0.076)
(4.750)
SOLID TOP
S3 TRANSFER
97-910
< View A - Computer tower side
panel is moved
sideways
during the
SOLID TOP S3 series
– STICKY
FINGERS
97-910
97-915
97-918
B
C
D
E
L
LENGTH
APPROX
0.100
15.000
K
0.620 0.220 0.004 0.375 0.030 0.760
0.070
K
L
0.004
(0.102)
0.375
(9.525)
0.030
(0.762)
0.760
(19.304)
0.100
(2.540)
APPROX.
L ENGTH
15.000
(381.000)
0.003
(0.076)
0.250
(6.350)
0.022
(0.559)
0.510
(12.954)
0.070
(1.,778)
15.000
(381.000)
0.018
0.380
0.070
(1.778)
15.000
(381.000)
(0.457)
(9.652)
IMPEDANCE
A
B
C
D
E
K
L
APPROX.
M
N
NO. OF
MIN.
L ENGTH
RIVETS
97-913 0.620 0.220 0.004 0.375 0.030 0.760 0.100
15.000 0.560 0.940
10
100 (15.748) (5.588) (0.102) (9.525) (0.762) (19.304) (2.540) (381.000) (14.224) (23.876)
—
120
15.000
<
0.350 0.110 0.003 0.187
0.018
0.070panel
15.000
View
B - 0.380
Next, the
is
moved
(2.794) (0.076)
(4.750) (0.457) sliding
(9.652) (1.778)
(381.000) on
downwards,
longitudinally
the vertical finger gasket.
80
97-916
60
97-919
40
0.450 0.140 0.003 0.250 0.022 0.510 0.070
15.000 0.630 0.880
(11.430) (3.556) (0.076) (6.350) (0.559) (12.954) (1.778) (381.000) (16.002) (22.352)
10
—
0.350 0.110 0.003
0.070
15.000 0.660 0.840
97-919 0.187 0.018 0.380
97-916(4.750) (0.457) (9.652) (1.778) (381.000) (16.764) (21.336)
(8.890) (2.794) (0.076)
10
97-913
20
0
RETENTION CLIP
10K
PART NO.
100K
97- 964
SERIES
97-913
97-916
97-919
A
MIN
B
C nowDcompressing
E
K
0.620 0.220 0.004 0.375 0.030 0.760 0.100 15.000
0.450 0.140 0.003 0.250 0.022 0.510 0.070 15.000
Attenuation (dB )
120
0.560
N
0.940
0.630
0.880
(11.430) (3.556) (0.076) (6.350) (0.559) (12.954) (1.778) (381.000) (16.002) (22.352)
Us ed On
0.350 0.110 0.003 0.187 0.018 0.380 0.070 15.000
0.660
0.840
97-919
97-965
Used On
97-916
97-966
Used On
97-913
1G
97- 916
97- 913
10
D
D
0.195
(4.953)
10
—
E
E
Rachet Type
Standard
10
A
K
A
K
Double
Adhesive
Tape
0.285
(7.239)
B
B
PART No.
Used On
97- 919
Us ed On
—
IMPEDANCE
RIVET
97-964
100M
Frequency (Hz)
NO. OF
RIVETS
(8.890) (2.794) (0.076) (4.750) (0.457) (9.652) (1.778) (381.000) (16.764) (21.336)
3
140
APPROX
10M
97- 96are
6 in inches (millimeters) unless
Us eotherwise
d On
All dimensions shown
specified.
(15.748) (5.588) (0.102) (9.525) (0.762) (19.304) (2.540) (381.000) (14.224) (23.876)
S TRANSFER
RETENTIONSOLID TOP PART
CLIP
No.
160
LENGTH
bothL finger
gaskets.
M
RIVET MOUNT PART NO.
1M
97- 965
SOLID TOP S3 series
MOUNT
< View–CRIVET
- Fully installed
panel is
C
L
Smallest
Opening
Push
Rivet
L
Smallest
Opening
M
1.500
(38.100)
100
Tapered Type
Optional
N
1.500
(38.100)
80
60
97-919
97-916
97-913
40
20
0
10K
100K
1M
10M
100M
1G
Frequency (Hz)
All dimensions shown are in inches (millimeters) unless otherwise specified.
RETENTION CLIP
The above picture shows our Solid Top S3 with a
retention clip. This clip is designed to ensure secure
retention of actual fingerstock to track component.
EMI-DS-FINGERSTOCK-SOLID TOP s3 1112
All dimensions shown are in inches
(millimeters) unless otherwise specified.
B
Double
Adhesive
Tape
140
(11.430) (3.556) (0.076) (6.350) (0.559) (12.954) (1.,778) (381.000)
(8.890)
E
SERIES
(15.748) (5.588) (0.102) (9.525) (0.762) (19.304) (2.540) (381.000)
0.450 0.140 0.003 0.250 0.022 0.510
D
160
SOLID
TOP S3 SERIES - RIVET MOUNT
Attenuation (dB )
SERIES
first step of installation.
A
MIN
Fingerstock Gaskets
A
MIN.
0.620
(15.748)
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for
any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and
Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies
Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein
provides a license under any Laird Technologies or any third party intellectual property rights.
Download PDF