PT-561-HDMI & IR over Twisted Pair Transmitter
The PT-561 and PT-562 are a twisted pair
transmitter and receiver for HDMI and IR
signals. The PT-561 converts an HDMI and IR
signal to a twisted pair signal and the PT-562
converts the twisted pair signal back to an
HDMI and IR signal.
M ax. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP & HDM I Compliant.
Bidirectional IR Support - IR is compatible with a Kramer transmitter and via a Kramer external
remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE.
Optional IR Emitter Cables - C-A35/IRE-10 single emitter & C-A35/2IRE-10 dual emitter.
Optional External IR Receiver Cables - C-A35M/IRR-3 and C-A35M/IRR-50.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control
and communication to signals that run over twisted pair cables. We strongly recommend using Kramer
DGKat™ cables designed specifically for optimum performance.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524
cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up
to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use
Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range
depends on the signal resolution, graphics card and display used. The distance using non-Kramer
CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both
ends of the shield are soldered to ground.
EDID PassThru - Passes EDID/HDCP signals from source to display.
ON (Red) / Transmit (Green) Status LED.
Power Connect™ System - A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with
the optional RK-4PT rack adapter.
INPUTS:1 HDMI connector.
OUTPUTS:2 CAT5 OUT on RJ-45 connectors.
IR PORT:Bidirectional on a 3.5mm mini jack.
BANDWIDTH:Supports up to 1.65Gbps bandwidth per graphic channel.
POWER SOURCE:5V DC, 440mA (transmitter and receiver together).
DIM ENSIONS:6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
WEIGHT:0.14kg (0.3lbs).
ACCESSORIES:Power supply.
OPTIONS:RK-4PT 19” rack mount adapter.