bintec TR200aw | TR200bw
Fully Convergent Multifunctional Gateway
The bintec TR200 is a multifunctional gateway designed for versatility and flexibility with a huge variety of professional
features from routing, WLAN, telephony, VoIP and FoIP (T.38). Besides the conventional telephone interfaces a
maximum of 10 SIP subsidiaries and 10 SIP providers are supported.It was specially developed for high-speed Internet
access and can also be used for remote access in small to medium-sized enterprises or remote offices. Standardly
equipped with a 4-port switch, the device also includes 5 IPSec tunnels ex works (default). With release 7.6.1 in
addition 5 PPTP tunnels can be added after web activation for free.
For the connection to a trunk the basic version offers an analog and an ISDN exchange connection, which can be used
alternatively. Two analog ports and an internal ISDN bus provide the direct connection of terminal devices. Furthermore
SIP terminal devices (IP telephones, soft clients, etc.) can be registrated at bintec TR200. You are able to register at up
to 10 SIP providers.
The control of the firewall and voice-data prioritization are assumed automatically by the bintec TR200 to simplify
configuration. A 4-channel DSP for voice-data processing has been integrated into the router to guarantee high voice
quality.
As a wireless router, the bintec TR200 supports the 802.11b/g standards with a gross throughput rate of 54 MBps. In
addition to WEP encryption, the secure WPA or WPA2 mode for the use of preshared keys or inclusion of a Radius
server is available to make sure that data transmission via the air interface remains secure. Access checks are already
made at the port level via 802.1x. The multi-SSID function makes it possible to form several different user groups, each
with their own privileges. With a push-button the WLAN modul can be switch off completely. A HTML user interface is
available to employ the configuration of the routers.
The configuration of the devices takes place via console or alternatively via the Funkwerk Configuration Interface (FCI).
The FCI is a web-based graphical user interface, which is accessable from every PC with a current web-browser via
HTTP or HTTPS connection. The encrypted SSL communication enables a secure configuration of the TR200.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec TR200aw | TR200bw
18.02.2010
Subject to technical
alterations
Versions
Feature
Description
TR200aw
ANNEX-A
TR200bw
ANNEX-B
Highlights
Feature
Description
Integrated ADSL modem
ADSL2 / ADSL2+ with downloads up to 12 / 24 Mbps
2 ISDN ports
Also for backup of ADSL connection, remote administration
4 Port Ethernet Switch 10/100
Ability to separate Ethernet Port for configuring a DMZ network segment or Load Balancing
scenarios
Multi-SSID
Virtual WLAN interfaces for individual access
IPSec
With AES, certificates, IPComp, NAT Traversal, RADIUS
DynDNS
Router can still be reached over the Internet in spite of dyn. IP address
RADIUS, TACACS+
Secure authentication
VLAN
Secure separation of network segments
Event Scheduler
Time-based execution of commands
Stateful Inspection Firewall
Connection based firewall
Content filtering
30 days test license
SSH login
Encrypted configuration session
Configuration Wizard
Configuration assistant for HTTP for Intranet and WLAN
Wireless LAN Features
Feature
Description
Standards
IEEE802.11b resp. IEEE802.11g
802.11i
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP
Multi SSID
Several service sets per radio in AP mode.
WEP 64/128
WEP 64 (40 Bit), WEP 128 (104 Bit)
WPA / WPA2
WPA Enterprise Mode; WPA PSK Mode;
WPA2 Enterprise Mode; WPA2 PSK Mode
Channels
13 channels (Europe) / 11 channels (USA)
Transmission Capacity
max. 100 mW (20 dBm) e.i.r.p
Receiver Sensitivity IEEE802.11b
11 Mbps:-82 dBm; 5,5 Mbps: -87 dBm; 2 Mbps: -91 dBm; 1 Mbps: -94 dBm
Receiver Sensitivity IEEE802.11g
54 Mbps:-65 dBm; 48 Mbps:-66 dBm; 36 Mbps:-70 dBm; 24 Mbps:-74 dBm; 18 Mbps:-77
dBm; 12 Mbps:-79 dBm; 9 Mbps:-81 dBm; 11 Mbps:-80 dBm; 5,5 Mbps: -83 dBm; 2 Mbps: -84
dBm; 1 Mbps: -87 dBm
DSL Interface
Feature
Description
ADSL
G.dmt over ISDN (ITU G.992.1 Annex B, ISDN - U-R2), G.Lite (ITU G.922.2)
ADSL2 / ADSL2+
with downloads up to 12 / 24 Mbps
High-speed Internet
PPPoA (RFC 2364) and PPPoE (RFC 2516)
ATM
AAL5 as Layer 1 protocol, PVCs, RFC 1483 encapsulation (LLC- or VC-multiplexed), support
for at least two simultaneous services, 5 or more simultaneous VC connections
ATM
Support of several VPI/VCI, line monitoring facilities through OAM F4/F5 protocol elements
ATM - VBR3
available
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec TR200aw | TR200bw
18.02.2010
Subject to technical
alterations
ISDN Interface
Feature
Description
ISDN protocols
Euro-ISDN
B-channel protocols
Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)
PPP, ML-PPP
(See Software)
CAPI
CAPI 2.0
Bit rate adaptation
V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM
subscribers
Automatic backup
Backup of the connection in case of failure of the ADSL line, including re-establisment of the
VPN tunnels
Security
Feature
Description
NAT/PAT
Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network
from public access
Access lists
Filtering of IP packets according to different criteria (source, destination, port and interface)
Stateful Inspection Firewall
Filtering with monitoring and interpretation of the status of the individual connections
RADIUS
Central check of access authorization at a RADIUS server (PPP and Login Authentication)
TACACS+
Support of TACACS a security application that provides centralized validation of users
Content filtering
30 day evaluation licence
VLAN
Network nodes in different network segments behave like a arbitrary group connected to the
same network segment
VPN - IPSec
Inclusive, with a max. of 5 (from rel. 7.6.1 onwards) simultaneous tunnels
VPN - IPSec
Powerful encryption up to 256 bits (AES, 3DES, DES, CAST, Blowfish, Twofish)
VPN-IPSec DPD
Dead Peer Detection for IPSec tunnel
VPN - PPTP
From rel. 7.6.1 onwards: Strong encryption, up to 128 bits (MPPE), up to 168 bits (DES/3DES,
Blowfish), free of charge activation via funkwerk web page
DynDNS / DynVPN
Router can still be reached over the Internet in spite of dyn. IP address
IKE for IPSec
Pre-Shared Keys and X.509 certificate support
X.509
X.509 v1/v3 certificates (PKCS#7/8/10, 12, CLRs, SCEP)
QoS for IPSec
Available
PKI Support for IPSec
Available
NAT Traversal for IPSec
Available
IPCOMP
IP Compression
IPSec / RADIUS
Available
IPSec Redesign
Policy manager and interface concept
L2TP
layer 2 tunneling protocol for ATM, Ethernet, PPP; user authentication
GRE
V.0 according RFC 2784 for common encapsulation
Maintenance and Service
Feature
Description
SNMP
Complete management with MIB-II, Enterprise MIB, inclusive SNMP management software for
Windows (DIME Tools and Browser)
SSH login
Secure connections for terminal applications
Trace / debugging / monitoring
Ethernet traces
DHCP
Server and client for simplified configuration for TCP/IP
Setup Tool
Integrated, menu-based, intuitive setup program, standard for the whole bintec product
portfolio
HTML Setup Tool
HTML interface accessible through a Java Script enabled browser
XADMIN
Roll out tool for larger router installations (IP+ISDN)
Documentation
Complete toolset and documentation on CD
Guarantee
2-year manufacturer's guarantee
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec TR200aw | TR200bw
18.02.2010
Subject to technical
alterations
Software Features
Feature
Description
TCP/IP routing
Routing information updating and distribution, static or dynamic (RIP v1/v2/triggered, RFC
2091), selectable for each interface, ProxyARP, BOOTP/DHCP forwarding
Extended IP routing
Dependent on source/destination port, source IP address, TOS ..., i.e. policy-based routing
IP load balancing
Bandwidth management
PPP
Authentication mechanisms (PAP, CHAP, MS-CHAP, MS-CHAP v2), standard PPP, dynamic
IP address assignment (server and client mode)
PPPoE
Point-to-Point Protocol over Ethernet (Client and Server) for high-speed Internet access over
ADSL (RFC 2516)
Dyn. IP addresses
Simple Internet access without fixed IP addresses
DynDNS
Router can still be reached over the Internet in spite of dyn. IP address
Funkwerk Access Point Discovery
Detection of configuered and unconfigured Funkwerk Access Points in the LAN
IP accounting
Source, destination, port, interface, packets/bytes counter
Connection time out
Short hold enables automatic call clearing
Hardware Features
Feature
Description
Processor / memory
TI Prozessor, 8 MB Flash, 32 MB RAM
ADSL
RJ11 port for connections to splitter
ADSL chipset
Texas Instruments chipset for ADSL modulation
LAN
Autosensing 10/100 Mbps Ethernet twisted pair
4-port switch
4-port autosensing 10/100 Mbps Ethernet switch
WLAN
Internal radio modul, 2,4 GHz Band, 1 external antenna (Antenna Diversity for 802.11b)
ISDN
2 x BRI (1 x external, 1 x internal)
Analogue
2 x FXS, 1 x FXO
Console
Serial console port
Power supply
External AC/DC converter 12 V DC, 1,25 A (approx. 2 W per internal ISDN-Bus)
Status LEDs
Power, Status, 4 x 10/100 BT, WAN, DSL, VoIP, ...
Housing
Metal housing
Fanless design
Long lifetime
Dimensions
205 x 29 x 172 mm (W x H x D)
Weight
Approx. 1000 g
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec TR200aw | TR200bw
18.02.2010
Subject to technical
alterations
bintec TR200aw | TR200bw Telephony Features
o Inquiriy call, Broker's call, Three-party conference
o Calling Line Identifcation Restriction (CLIP, CLIR)
o Call forwarding (CFU, CFB, CFNR)
o Call waiting
o Busy on Busy
o Station guarding (Do not disturb feature)
o Automatic exchange line access
o Pick-up (Call pick-up)
o AOC transfer tinternal S0
o CLIP, CLIP off Hook with FXS
o Terminal device type for analog connections (6 variants)
o Call Deflection - Deflecting calls before accepting
o Call Through
o CCBS, CCNR - Autom. completion of call to busy subscriber - of call on no answer
o Direct dial-in (baby phone / emergency calls)
o Point-to-multipoint access (P-MP), Point-to-point connection (P-P)
o Remote configuration over ISDN
o Follow me call forwarding service
o Message Waiting Indication external/internal: (ISDN only)
o MSN-specific line access
o Name assignment textensions
o Hight priority emergency call numbers
o Partial Rerouting (with P-P access only)
o Room monitoring internal
o SMS in the fixed-line network
o Exchange line access authorization for internal parties (6 stages)
o Restricted and unrestricted numbers
o Status display for internal call forwardings
o Phone book, Speed dialing from the telephone directory
o Door terminal adapter for analog ports
o UUS1
o VoIP/SIP telephony with up to 4 SIP terminal devices in a LAN (from release 7.6.5 onwards support of up to 10 SIP
terminal devices in LAN/WLAN)
o Recall per time
o 14 internal subscribers max.
o 3-digit telephone numbers
o 10 Emergency calls, 10 Direct dial-in number
o Day / night call mode
o Two calendars/switching times
o 300 telephone book entries
o Two internal music on hold tunes
o Fallback on busy or missing bandwidth
o Ten SIP-providers
o SIP-User Agent, -Client, -Registrar, -Proxy
o Discrete DSP-channels for media transfer
o DSP-codecs: G.711, G.723.1, G.726, G.729a/b
o Intelligent bandwidth management
o Support of ISDN system phones
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec TR200aw | TR200bw
18.02.2010
Subject to technical
alterations