Actionstar UK-2PA0 A-GL KVM switch User manual

INTRODUCTION
UK-2PA0-A-GL
The KVM switch allows a single keyboard, video display monitor, and mouse to be
switched to access multiple computers. The switch provides more table space in addition to
saving the cost of multiple keyboards and monitors.
FEATURES
z
z
z
z
z
z
z
z
z
Access multiple PCs with one set of Keyboard, Mouse, Monitor and Audio.
Space saving and cost effective.
Front panel LEDs indicate which PC is selected.
Select PCs by using front panel SELECT button or Hot Key command.
Auto Scan Mode sequences through PC.
Supports SVGA , VGA and multi-sync Monitors, resolutions up to 2048*1536
Can switch independent KVM and Audio.
Buzz for switching confirmation.
Windows 98, Me, 2000, XP, Vista and Linux OS compatible.
SPECIFICATION
Function
Model No.
PC Port
USB Device Port
Cable Length
Port Selection
PC Port LED
Selected
Specification
UK-2PA0-A-GL
2
2 (only for one keyboard and one mouse)
1.8 m
Select button or Hot-key commands
2 x Green Color LED
1 x USB Type A Male (while)
PC
Cable Connector
1 x HDB -15 Male (blue)
KVM
1 x HDB -15 Male (block)
Console
2 x HDB-15 Female (block)
KVM
Keyboard
1 x USB Type A Female (while)
Connector
Mouse
1 x USB Type A Female (while)
Monitor
1 x HDB-15 Female (Blue)
Module Weight
98.8 g
Module Dimension (L x W x H) 110 x 66 x 22 mm
Emission
CE, FCC, C-Tick
PACKAGE CONTENTS
z
z
z
1 x 2-port USB KVM switch
1 x User manual
2 x Cables
Configuration
After installation, you can either choose the "SELECT" button that leads you through
multiple computers or Hot Key controls.
The SELECT button
Keyboard Hot Key Menu:
Press [Scroll Lock] twice, and you will hear an audible switching confirmation tone to ensure
you are already in the Hot Key Mode (LED is blinking)
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before
switching to the next. Please notice that the mouse and keyboard control will be restricted
in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don’t press any buttons after 4 or 5 seconds.
Note:
This KVM Switch will not detect whether a computer is on or off if the “Power On” function
is set in the Bios. Meaning, when you switch to the computer that is turned off, there will
be nothing displayed on the monitor.
Troubleshooting
Q1: When switching the computer on, the keyboard is not detected, or keyboard / mouse
shows error message.
A:
If computer BIOS does not support USB boot-up, the system is unable to detect mouse and
keyboard during computer start.
Q2: What if the computer BIOS is correct but the computer still unable to detect the mouse
and keyboard?
A:
We suggest user to directly connect the USB KVM switch to USB port on PC, not connect
through PCI card, Card Bus, or USB Hub.
Q3: The keyboard is functional, but the mouse is not.
A:
While using the device, we suggest user to plug on mouse first then follow by keyboard at
the appointed location on USB KVM Switch.
Q4: When the device unoccupied for a moment, the mouse becomes not functional.
A:
If this incident happens, please press 「Scroll Lock」+「Scroll Lock」+「M」to restart the
device.
Call your dealer if there are any wrong, missing, or damaged parts. Keep the carton,
including the original packing materials, to repack the KVM Switch if there is a need to return
it for repair.
">