ADSL2+ Master POTS Splitter
FOR INDOOR CUSTOMER PREMISES
PS-15-I3S
Description
The Wilcom PS-15-I3S POTS Splitter is a passive lowpass filter designed to provide POTS service in concert with
ADSL technology. The device blocks high frequency (20kHz1MHz) energy from interfering with POTS equipment. The
PS-15-I3S employs a low-pass filter for standard voicegrade lines.
The PS-15-I3S is designed to be mounted inside the
customer premises near where the phone service enters the
building. Two types of connection options are supported by
the PS-15-I3S splitter; a standard 6 pole terminal block with
screws or RJ jacks. This allows the installer to simply
connect the existing premise wiring to the PHONE jack or
associated terminals on the splitter, and have POTS service
up and running within minutes without expensive and timeconsuming rewiring. An RJ-45 jack or associated terminals
connect directly to the ATU-R/MODEM equipment with
data-grade cabling.
Features and
Benefits
•
Compatible with ADSL coding schemes
•
Passive circuitry for continuous phone service
in the event of an AC power failure
The PS-15-I3S ADSL Master POTS Splitter is
compatible with all ADSL coding schemes
•
Meets ANSI T1.413 and G.992.1 - E.2
•
•
RJ Jacks and Terminal Block
The PS-15-I3S ADSL Master POTS Splitter
has both RJ jacks and screw type terminals for
flexible wiring schemes
Easily Mounted
The compact ADSL Master POTS Splitter can
be screwed in place or two-sided adhesive tape
can be used for mounting the unit to the
desired location
The PS-15-I3S ADSL Master POTS Splitter is
fully compliant with the requirements of ANSI
T1.413-1998 Annex E; ITU-T G.992.1,
G.992.2 Annex E.2 Type 2 (North America) &
G992.5 (ADSL2+)
•
Passive Low Pass Filter
Unlimited ADSL Bandwidth
Full bandwidth allocation as compared to the
"Micro-filters" on the market today
Wilcom
Specifications
Ordering Information
Filter Parameters
Product
PS-15-I3S
PS-15-01-I3S
Corner Frequency
PS-15-I3S
Insertion Loss (1kHz)
> 7kHz
< 0.25dB
Weight
Environment
Temperature @(5 to 95% humidity)
Operating
Storage
Function Type
> 65 dB
< 0.25dB
< 50uSec
+27dB
+18dB
+20dB
< 20 W
> 70dB
Tip
Ring
Line
RJ-11
Pin 3
Pin 4
ATU-R
Modem
RJ-45
Pin 4
Pin 5
Phone
RJ-11
Pin 3
Pin 4
1
6
1
RJ-11 jack
Power
Maximum Loop Current
Physical
Dimensions (HWD)
(uses all RJ-11 jacks)
PS-15/I3S
30kHz Attenuation
PS-15-I3S
Attenuation Distortion (0.2kHz-3.4kHz)
Delay Distortion
Return Loss (600 W + 2.16uF, typical)
ERL
SRL-LO
SRL-HI
DC Resistance
Longitudinal Balance
Part Number
30150030
30150040
8
RJ-45 jack
100mA
PS-15-01/I3S
Function Type
0.9" x 3.0" x 2.0"
(23 x 76 x 51 mm
2.6 oz. (73.70 g)
Tip
Ring
Line
RJ-11
Pin 3
Pin 4
ATU-R
Modem
RJ-11
Pin 3
Pin 4
Phone
RJ-11
Pin 3
Pin 4
-40°C to +70°C
-40°C to +70°C
Safety
UL listed to U.S. and Canadian Safety Standards
T
R
Warranty
T
R
T
R
The Wilcom PS-15-I3S & PS-15-01-I3S POTS Splitters
are warranted against failure for a period of three years
if normal usage is observed.
ISO-9001:2000
Registered
Specifications and prices are subject to change without notice.
05/05
812-988-003
Line
ATU-R
Modem
Phone
NOTE:
1. Terminals and Jacks are connected in
parallel.
2. Terminals are screw type and require a
screwdriver.
Wilcom
P.O. Box 508, Laconia, NH 03247
Tel: 603/524-2622 or 800/222-1898, Fax: 603/524-3735
www.wilcominc.com