VRV IV
360° efficiency
VRV IV heat recovery, heat pump, replacement
and water cooled
Our new VRV IV heat recovery systems set pioneering
standards in all-round climate comfort performance.
Total design simplicity, offering rapid installation, full
flexibility as well as absolute efficiency and comfort.
Find out about all these revolutionary changes at
www.daikineurope.com/vrviv
2
VRV IV =
3 revolutionary standards
› Variable refrigerant temperature
› Continuous comfort during defrost
› VRV configurator
+ VRV IV technologies
+ Integrated climate control
+ VRV IV heat recovery
technologies
3 intelligent efficiency
improvements
Improved operational efficiency
Improved installation efficiency
ūū Improved efficiency during heat recovery mode
with 15%
ūū Free heating or hot water by recovering heat from
areas requiring cooling
ūū Optimal comfort for everybody by simultaneous
cooling spaces while heating others
ūū Fully redesigned multi BS boxes, smaller and up to
70% lighter
ūū No limit on number of unused ports
ūū Connect indoor units up to 28kW to a single and
multi BS box
Improved design efficiency
ūū Integrated climate control covering all thermal
loads in the building
ūū Free combination of outdoor units, single and multi
BS boxes
ūū Unique range of single and multi BS boxes
3
Variable refrigerant
temperature
Customise your VRV for
best seasonal efficiency
and comfort
ūū Seasonal efficiency increased by 28%
ūū Weather compensating control
ūū Customer comfort is assured with automatic
adjustment of refrigerant temperature, leading
to higher outblow temperatures (and
preventing cold draughts)
Thanks to its revolutionary variable refrigerant
temperatue technology, VRV IV continuously
adjusts the refrigerant temperature to the actual
temperature and capacity needed, thus providing
optimal seasonal efficiency at all times.
Different modes
throughout the year and react quickly on the hottest
days, ensuring comfort at all times while still resulting
in an increased seasonal efficiency up to 28%.
Easily customise your system using preset modes.
These help you achieve the right balance between
comfort and efficiency. In unique VRT automatic
mode the system will aim for maximum efficiency
Automatic mode (Default setting on VRV IV)
Basic mode (current VRF standard)
High sensible mode
Load
Load
Load
Refrigerant volume (VRV)
Refrigerant volume (VRV)
Refrigerant volume (VRV)
Refrigerant temperature (VRT)
Refrigerant temperature (VRT)
Refrigerant temperature (VRT)
Efficiency
Efficiency
Efficiency
Effect of preset modes on efficiency and
reaction speed
Automatic mode
Quick reaction speed
Top efficiency
The perfect balance: Achieves top efficiency
throughout the year, reacts quickly on the
hottest days
4
Basic mode
High sensible mode
Quick reaction speed
Year round top efficiency
Top efficiency
Quick reaction speed
Top efficiency
Quick reaction to peak load in order to maintain
set point.
Success story
A field trial at a fashion chain store in
Germany showed that the innovative
VRV IV dramatically improves energy
efficiency over previous models.
Live test: up to 40% less
energy consumed
A field trial at a fashion chain store in Germany
showed that the innovative VRV IV dramatically
improves energy efficiency over previous models.
The results of the trial showed that the new VRV IV
system consumed much less energy, particularly
during cooling, compared with the VRV III system
– in some cases up to 60% less. During heating,
energy savings averaged 20%.
How effective is the VRV IV heat
pump technology?
Average energy consumption
during working hours
The trial demonstrates just that. Using a renewable
energy source air – it provides a complete and
environmentally sustainable solution for heating,
cooling, and ventilation in commercial environments.
The trial also showed that businesses can only
identify and control energy wastage through careful
and intelligent monitoring of climate control systems
– a service which Daikin also offers.
-2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Difference between average indoor temperature and outdoor temperature (in Kelvin)
Energy use in 2012:
Energy use in 2013:
VRV III single module system 20HP VRV IV single module system 18HP
Metered energy use
Trendline
Savings:
Trendline
Metered energy use
Trendline
5
Continuous
heating
during defrost mode
Pure comfort
VRV IV continues to provide heating even during
defrost mode, providing an answer to any perceived
disadvantages of specifying a heat pump for
monovalent heating.
ūū Indoor comfort not affected during
defrost mode
ūū The best alternative to traditional
heating systems
Changed heating pardigm
Known for their high energy efficiency during
heating, heat pumps also accumulate ice during
operation. This must be melted periodically using a
defrost function that reverses the refrigeration cycle.
This causes a temporary drop in temperature and
reduced comfort levels inside the building.
Room temperature
Defrosting may take longer than 10 minutes
(depending on the size of the system) and occurs
most frequently between -7 °C and +7 °C when air
humidity is highest; this freezes to the coil and has
a significant impact on perceived indoor comfort
levels.
The VRV IV has changed the heating pardigm by
providing heat even during defrost mode, thus
eliminating the temperature drop inside and
providing comfort at all times.
6
VRV IV
VRF
Time
Defrost mode
How does it work?
Unique heat-accumulating element
Alternate defrost
A unique heat-accumulating element made up of
phase-change materials, provides the energy to
defrost the outdoor unit. The energy needed for
defrosting is stored in the element during normal
heating operation.
On all our multi-model combinations, only one
outdoor coil is defrosted at a time, ensuring
continuous comfort during the whole process.
The outdoor unit coil is defrosted with energy
stored in the heat-accumulating element. Indoors,
a comfortable temperature is maintained.
7
Software for simplified
commissioning,
configuration and
customisation
8
VRV
configurator software
ūū Graphical interface
ūū Manage systems over multiple sites in exactly
the same way
ūū Retrieve initial settings
Simplified commissioning
Simplified servicing
The VRV configurator is an advanced software
solution that allows for easy system configuration
and commissioning.
ūū Less time is required on the roof to configure the
outdoor unit
ūū Multiple systems at different sites can be managed
in exactly the same way, providing simplified
commissioning for key accounts
ūū Initial settings on the outdoor unit can be easily
retrieved
The user-friendly display for outdoor units simplifies
basic servicing tasks.
ūū Easy-to-read error report
ūū Easy-to-understand menu indicates quick and easy
on-site settings
ūū Easy-to-follow parameters for checking basic
functions: high pressure, low pressure, frequency
and operation time, compressor history,
temperature of discharge/suction pipe.
3-digit 7-segment
display
User-friendly interface
instead of push buttons
9
VRV IV
technologies
Newly developed
compressor
Full inverter
High efficiency J-type 6-pole motor
ūū Enabling variable refrigerant temperature and low
start-up currents
ūū Stepless capacity control
ūū 50% stronger magnetic field and higher rotation
efficiency
Reluctance brushless DC motor
ūū increased efficiency compared to AC motors by
simultaneously using normal and reluctance torque
ūū Powerful neodymium magnets efficiently generate
high torque
ūū High-pressure oil reduces thrust losses
Gas-cooled PCB
ūū Reliable cooling because it is not influenced by
ambient air temperature
ūū Smaller switchbox for smoother air flow through
the heat exchanger
4-sided heat exchanger
ūū Heat exchange surface up to 50% larger (up to
235m2), leading to 30% more efficiency
10
Newly developed compressor material
ūū Compression volume is increased by 50% thanks to
a new high-strenght material cast in a semi-molten
state (thixocasting process)
DC fan motor
Outer rotor DC motor for higher efficiency
Conventional motor with inner rotor
Daikin outer rotor
ūū Larger rotor diameter results in greater force for the
same magnetic field
ūū Better control, resulting in more fan steps to match
the actual capacity
Sine wave DC inverter
Optimizing the sine wave curve results in smoother
motor rotation and improved motor efficiency.
F
DC fan motor
The use of a DC fan motor offers substantial
improvements in operating efficiency compared to
conventional AC motors, especially during low speed
rotation.
E-Pass heat exchanger
Optimization of the path layout of the heat
exchanger prevents heat transferring from the
overheated gas section towards the sub cooled
liquid section – a more efficient use of the heat
exchanger.
I-demand function
The newly introduced current sensor minimizes
the difference between the actual power
consumption and the predefined power
consumption.
F
Rotor
Stator
Stator
Standard heat exchanger
e-Pass heat exchanger
In 85 °C
In 85 °C
43 °C
55 °C
27 °C
Rotor
55 °C
27 °C
60 °C
50 °C
55 °C
Out 45 °C
Out 45 °C
Power consumption
Predefined limit
Time
11
The VRV
total solution
Typically, many buildings today rely on
several separate systems for heating, cooling,
refrigeration and hot water. As a result, a huge
amount of energy is wasted. To provide a much
more efficient alternative, VRV technology has
been developed into a total solution managing
up to 50% of a buildings energy consumption
giving large potential to cost saving.
ūū Heating and cooling for year round comfort
ūū Hot water (high temperature applications)
ūū Underfloor heating (low temperature application)
ūū Ventilation for high quality environments
ūū Air curtains for heat pump applications
ūū Controls for maximum operating efficiency
Heating
Cooling
Hot water
Underfloor heating
Air curtains
Combine up to 50% of
your building’s energy
consumption
Ventilation
Controls
Water heating
Other
Space heating
Office
equipment
Lighting
Space cooling
Ventilation
Source: EIA; Commercial buildings energy consumption survey
12
Integrate third-party
equipment
One system,
multiple applications for hotels,
offices, retail, home …
Heating and cooling
Intelligent control systems
22
ūū Combine VRV indoor units with other stylish indoor
units in one system
ūū New round flow cassette sets the standard for
efficiency and comfort
ūū Mini BMS with connects Daikin and third-party
equipment
ūū Integrate intelligent control solutions with energy
management tools to reduce running costs
Low-temperature hydrobox for highly
­efficient space heating throughout
Biddle air curtain
ūū Underfloor heating
ūū Low temperature radiators
ūū Heat pump convector
ūū Hot water from 25 °C to 45 °C
ūū Payback time less than 1 year compared to electrical
air curtain
ūū A highly efficient solution for doorway climate
separation
High temperature hydrobox* for efficient
hot water production
Ventilation
*only for connection to VRV heat recovery
ūū Showers
ūū Sinks
ūū Tapwater for cleaning
ūū Hot water from 25 °C to 80 °C
ūū Widest range in DX ventilation – from small heat
recovery ventilation to large scale air handling units
ūū Provides a fresh, healthy and comfortable
environment
13
VRV IV
heat recovery
Advantages through
superior technology
“Free” heat and hot water
production
Until now, most commercial buildings have relied on
separate systems for cooling, heating, hot water and
so on, which results in a lot of wasted energy.
An integrated heat recovery system reuses heat from
offices, server rooms, to warm other areas or create
hot water.
22
Maximum comfort
A VRV heat-recovery system allows simultaneous
cooling and heating.
ūū For hotel owners, this means a perfect environment
for guests as they can freely choose between
cooling or heating.
ūū For offices, it means a perfect working indoor
N
climate for both north and south-facing offices.
Cooling
Extracted heat delivers
free hot water and heating
Hot water
+
22
14
Heating
S
Fast design
Quick installation
More free heat
Maximum comfort
Savings in running costs
and CO₂ emissions
Re-using energy gained through heat recovery can
lead to a COP of up to 10, meaning for one kW of
electricity you get up to 10kW of heating or cooling
capacity.
COP
Ideal situation when heating and cooling
10
8
7
6
5
4
3
2
1
Only cooling
50 % heating
Only heating
50 % cooling
Improved efficiency
Cooling load
In heat-recovery operation the VRV IV is up to 15%
more efficient. In full-load operation the seasonal
efficiency is even as much as 28% more efficient than
the VRV III thanks to variable refrigerant temperature.
Improved mix
mode control
Ambient
temperature
Heating load
15
Advantages
of 3-pipe technology
More “free” heat
Pressure
Daikin 3-pipe technology needs less energy to
recover heat, meaning significantly higher efficiency
during heat recovery mode. Our system can recover
heat at a low condensing temperature because it has
dedicated gas, liquid and discharge pipes.
Condensing 55 °C
Condensing 45 °C
In a 2-pipe system, gas and liquid travel as a mixture
so the condensing temperature needs to be higher
in order to separate the mixed gas and liquid
refrigerant. The higher condensing temperature
means more energy is used to recover heat resulting
in lower efficiency.
Lower pressure drop
means more efficiency
ūū Smooth refrigerant flow in 3-pipe system thanks to
2 smaller gas pipes results in higher energy efficiency
ūū Disturbed refrigerant flow in large gas pipe on
2-pipe system results in bigger pressure drop
Power input Daikin
Power input 2-pipe system
Enthalpy
Pressure
3-pipe VRV H/R
2-pipe system
Pipe length
Freely combine outdoor
units
Combine outdoor units flexibly to reduce your carbon
footprint, optimise your system for continuous heating,
and achieve the highest efficiency.
16
Fully redesigned
BS boxes
Maximum design flexibility
and installation speed
ūū Quickly and flexibly design your system with a
unique range of single and multi BS boxes.
ūū A wide variety of compact and lightweight multi
BS boxes greatly reduces installation time.
Single port
ūū Unique to the market
ūū Compact and light to install
ūū No drain piping needed
ūū Ideal for remote rooms
ūū Technical cooling function
ūū Connect up to 250 class unit (28 kW)
ūū Allows multi-tenant applications
BS1Q 10, 16, 25 A
Multi port: 4 – 6 – 8 – 10 – 12 – 16
ūū Up to 70% smaller and 66% lighter than
previous range
ūū Faster installation thanks to a reduced number
of brazing points and wiring
ūū All indoor units connectable to one BS box
ūū Fewer inspection ports needed
ūū Up to 16 kW capacity available per port
ūū Connect up to 250 class unit (28kW) by
combining 2 ports
ūū No limit on unused ports, permitting
phased installation
BS 4 Q14 A
BS 6, 8 Q14 A
BS 10, 12 Q14 A
BS 16 Q14 A
Maximum comfort at
all times
Off
With the VRV BS box, any indoor unit not being used
to switch between heating and cooling maintains
the constant desired temperature. This is because
our heat recovery system does not need to equalise
pressure over the entire system after a change-over.
Faster installation thanks to open connection
ūū No need to cut the pipe before brazing – for indoor
units smaller or equal to 5.6 kW (50 class)
ūū Cut and braze the pipe – for indoor units bigger or
equal to 7.1 kW (63 class)
17
What does a VRV IV
installation mean
to you?
See how you can profit from Daikin’s
highly flexible and efficient product
range.
Consultants
Daikin's VRV IV technology maximises flexibility and
leads the way in customisation to match individual
building requirements in comfort and energy, with
reduces running costs.
ūū Ecological design meets and exceeds legal
requirements
ūū Ideal for reaching top BREEAM/EPDB levels
ūū No more cold draughts with higher evaporation
temperatures up to 11 °C or 16 °C
ūū Unique specifications for monovalent heating
ūū Maximum flexibility to meet customer
requirements
ūū Advanced software tools assist with system design
Building owners
VRV IV is the ultimate in customised comfort and
intelligent control tailored to your individual needs
and to maximise energy efficiency. Annual cost
savings up to 28% (compared to VRV III).
ūū Annual cost savings up to 28% (compared to VRV III)
ūū No more cold draughts with variable refrigerant
temperature
ūū Single point of contact for the design and
maintenance of your climate system
ūū Integrated system, combining air conditioning, hot
water, ventilation, etc. allows maximum heat
recovery and energy efficiency
ūū Multiple systems can be managed in exactly the
same way for the key accounts
ūū Dedicated after-sales service to ensure fast on-site
support
Installers
Daikin VRV IV sets the standard with state-of-the-art
technology and time-saving commissioning and
servicing.
18
ūū Simplified and time-saving commissioning with VRV
configurator
ūū Remote refrigerant containment check
ūū Unique range of single and multi BS boxes reduce
installation time
ūū Wide range of outdoor units (up to 54HP both for
heat pump and heat recovery)
ūū One supplier = one point of contact
ūū Maximum flexibility to meet customer
requirements
ūū Customised training to maximise expertise
VRV IV outdoor unit
products overview
VRV IV heat recovery
VRV IV heat pump
ūū Fully integrated solution with heat recovery for
maximum efficiency with COPs of up to 8!
ūū Covers all thermal needs of a building via single
point of contact: accurate temperature control,
ventilation, hot water, air handling units and Biddle
air curtains
ūū ‘Free’ heating and hot water through heat recovery
ūū Perfect personal comfort for guests/tenants via
simultaneous cooling and heating
ūū Incorporates VRV IV standards and technologies
such as variable refrigerant temperature and
continuous heating
ūū Unique range of single- and multi BS boxes
ūū Covers all thermal needs of a building via a single
point of contact: accurate temperature control,
ventilation, hot water, air handling units and Biddle
air curtains
ūū Can be connected to stylish indoor units
(Daikin Emura, Nexura)
ūū Incorporates VRV IV standards and technologies
such as variable refrigerant temperature and
continuous heating
Replacement VRV IV
Water cooled VRV IV
ūū Cost-effective and fast replacement through re-use
of existing piping
ūū Up to 40% more efficient than R-22 systems
ūū No interuption of daily business while replacing
your system
ūū Replace Daikin and other manufacturers' systems
safely
ūū Incorporates VRV IV standards and technologies
such as variable refrigerant temperature
ūū Reduces CO₂ emissions by using geothermal energy
as an energy source
ūū Geothermal mode eliminates need for an external
heating or cooling source
ūū Covers all thermal needs of a building via a single
point of contact: accurate temperature control,
ventilation, hot water, air handling units and Biddle
air curtains
ūū Compact and lightweight design can be stacked for
maximum space saving
ūū Incorporates VRV IV standards and technologies
such as variable refrigerant temperature
ūū Variable water flow control option increases
flexibility and control
19
Outdoor units
Products overview
REYQ-T
ūūDaikin’s optimum solution with top comfort
ūūCovers all thermal needs of a building via a single point of contact:
accurate temperature control, ventilation, hot water, air handling units and
Biddle air curtains
ūūConnectable to stylish indoor units (Daikin Emura, Nexura)
ūūIncorporates VRV IV standards & technologies such as
Variable Refrigerant temperature and continuous heating
RYYQ-T
ūūDaikin’s solution for comfort & low energy consumption
ūūCovers all thermal needs of a building via a single point of contact:
accurate temperature control, ventilation, hot water, air handling units
and Biddle air curtains
ūūConnectable to stylish indoor units (Daikin Emura, Nexura)
ūūIncorporates VRV IV standards & technologies such as
Variable Refrigerant temperature
RXYQ-T
VRVIV-S
series
VRVIV-S series
Compact
ūūSpace saving solution without compromising
on efficiency
ūūFor residential and light commercial applications
ūūSpace saving design
ūūEither connect VRV of stylish indoor units (Daikin Emura, Nexura)
ūūThe most compact VRV
ūūCompact and lightweight single fan design saves space and is easy to install
ūūCovers all thermal needs of a building via a single point of contact: accurate
temperature control, ventilation, air handling units and Biddle air curtains
ūūEither connect VRV of stylish indoor units (Daikin Emura, Nexura)
ūūIncorporates VRV IV standards & technologies such as Variable Refrigerant
temperature
VRV Classic
Replacement VRV Replacement VRV
heat pump
heat recovery
Water cooled VRV IV
Water cooled
Product name
ūūBest efficiency & comfort solution
ūūFully integrated solution with heat recovery for maximum efficiency
with COPs of up to 8!
ūūCovers all thermal needs of a building via a single point of contact: accurate
temperature control, ventilation, hot water, air handling units and Biddle air curtains
ūū“Free” heating and hot water through heat recovery
ūūThe perfect personal comfort for guests/tenants via simultaneous cooling and heating
ūūIncorporates VRV IV standards & technologies such as
Variable Refrigerant temperature and continuous heating
ūūAllows technical cooling
ūūWidest range of BS boxes on the market
ūūSpace saving solution without compromising on efficiency
ūūSpace saving trunk design for flexible installation
ūūCovers all thermal needs of a building via a single point of contact: accurate
temperature control, ventilation, air handling units and Biddle air curtains
ūūEither connect VRV of stylish indoor units (Daikin Emura, Nexura)
ūūIncorporates VRV IV standards & technologies such as Variable Refrigerant
temperature
VRV III heat
pump, optimised
for heating
Air cooled
VRVIII-S
VRV IV heat pump
without continuous
heating
VRV IV heat pump
with continuous
heating
VRV IV heat recovery
Type Model
ūūWhere heating is priority without compromising on efficiency
ūūSuitable for single source heating
ūūExtended operation range down to -25°C in heating
ūūStable heating capacity and high efficiencies at low ambient temperatures
ūūClassic VRV configuration
ūūFor standard cooling & heating requirements
ūūConnectable to VRV indoor units, controls and ventilation
--Quick & quality replacement for R-22 and R-407C systems
--Cost-effective and fast replacement through re-use of exisiting piping
--Up to 40% more efficient than R-22 systems
--No interuption of daily business while replacing your system
--Replace Daikin and other manufacturers systems safely
ūūQuick & quality replacement for R-22 and R-407C systems
ūūCost-effective and fast replacement through re-use of exisiting piping
ūūUp to 80% more efficient than R-22 systems
ūūNo interuption of daily business while replacing your system
ūūReplace Daikin and other manufacturers systems safely
ūūIncorporates VRV IV standards & technologies such as
Variable Refrigerant temperature
ūūIdeal for high rise buildings, using water as heat source
ūūReduced CO2 emissions thanks to the use of geothermal energy as a renewable
energy source
ūūNo need for an external heating or cooling source when used in geothermal mode
ūūCovers all thermal needs of a building via a single point of contact:
accurate temperature control, ventilation, hot water, air handling units
and Biddle air curtains
ūūCompact & lightweight design can be stacked for maximum space saving
ūūIncorporates VRV IV standards & technologies such as
Variable Refrigerant temperature
ūūVariable Water Flow control option increases flexibility and control
4
6
8 10 12 13 14 16 18 20 22 24 26 28 30





      

      


      
RXYSQP8V1/P8Y1



Compact
Preliminary
RTSYQ-PA

RXYCQ-A


RQCEQ-P


RXYQQ-T




      

      

RWEYQ-T



20
5
Single unit
Multi combination
  
           
           
           
Air curtains CYV-DK-
AHU connection EKEXV- + EKEQFCB
HRV units VAM-, VKM-
AHU connection EKEXV- + EKEQMCB
HT Hydrobox HXHD-A
LT Hydrobox HXY-A
Remarks
VRV IV Heat Recovery REYQ-T
š O š š š š O š
with only VRV indoor units

with LT/HT Hydroboxes

  
HRV units VAM-, VKM-

   

AHU connection EKEXV + EKEQMCB

 

Biddle air curtain CYV-DK-

 

VRV IV Heat Pump RYYQ-T / RXYQ-T
š š š O š š š š
ūūStandard total system connection ratio limit: 50 ~ 130%
with only VRV indoor units

ūū200% total system connection ratio possible under special
circumstances
with residential indoor units
 
with LT Hydroboxes

HRV units VAM-, VKM-
  
 

AHU connection EKEXV + EKEQMCB

 


ūūMax 32 indoor units, even on 16HP and larger systems
ūūTotal system connection ratio up to 200% possible

ūūMax 32 indoor units, even on 16HP and larger systems
ūūContact Daikin in case of multi-module systems (>20HP)

with Split indoor units
VRV IV-S Mini VRV
š š O O š š O š
with VRV indoor units

with VRV indoor units
 
ūūStandard total system connection ratio limit: 50 ~ 130%
ūūTotal system connection ratio in terms
of VRV indexes: 56 ~ 145%
ūūStandard total system connection ratio limit: 50 ~ 130%

ūūTotal system connection ratio in terms
of VRV indexes: 56 ~ 145%

with Split indoor units
VRV IV-S Mini VRV
š š O O š š O š
with VRV indoor units

with Split indoor units
ūūDedicated systems (with only ventilation units) not allowed –
a mix with standard VRV indoor units is allways neccessary
ūūOnly single-module systems (RYYQ 8~20 T / RXYQ 8~20 T)
ūūMax 32 indoor units, even on 16HP, 18HP and 20HP systems

 

š š O O š š O š

 


Biddle air curtain CYV-DK-
ūūStandard total system connection ratio limit: 50 ~ 130%

AHU connection EKEXV + EKEQMCB
VRV III-S Mini VRV RXYSQ-P8
     
Residential indoor units
VRV indoor units
Capacity (HP)
32 34 36 38 40 42 44 46 48 50 52 54 Description / Combination
 
ūūStandard total system connection ratio limit: 50 ~ 130%


ūūTotal system connection ratio in terms
of VRV indexes: 56 ~ 145%
VRV III Cold Region RTSYQ-PA
 O O O   O 
ūūStandard total system connection
ratio limit: 50 ~ 130%
VRV Classic RXYCQ-A
 O O O  O O O
ūūStandard total system connection ratio limit: 50 ~ 120%
ūūIn case of using at least one FXFQ20~25 indoor units on 8HP or
10HP models, the maximum connection ratio is 100%.
VRV III-Q Replacement H/R
RQCEQ-P
 O O O  O O O
ūūStandard total system connection
ratio limit: 50 ~ 130%
VRV IV-Q Replacement H/P
RXYQQ-T
 O O O   O 
ūūStandard total system connection
ratio limit: 50 ~ 130%
VRV IV-W Water-cooled VRV
RWEYQ-T
 O O O   O 
ūūStandard total system connection
ratio limit: 50 ~ 130%
š ... connection of indoor unit possible, but not neccessarily simultaneously with other allowed indoor units
 ... connection of indoor unit possible even simultaneously with other checked units in the same row
O ... connection of indoor not possible on this outdoor unit system
21
Indoor units
Products overview
Type
Model
Round flow
cassette
Fully flat cassette
Ceiling mounted
cassette
Concealed
ceiling
Wall mounted
Floor standing
ūūUnique design in the market that integrates fully flat into the ceiling
ūūPerfect integration in standard architectural ceiling tiles
ūūBlend of iconic design and engineering excellence with a white or silver and white finish
ūūIntelligent sensors save energy and maximize comfort
ūūSmall capacity unit developed for small or well-insulated rooms
ūūFlexibility to suit every room layout
FXZQ-A
FXCQ-A
Ceiling mounted
corner cassette
ūū1-way blow unit for corner installation
ūūCompact dimensions enable installation in narrow ceiling voids
ūūFlexible installation thanks to different air discharge options
FXKQ-MA
Small concealed
ceiling unit
ūūDesigned for hotel rooms
ūūCompact dimensions enable installation in narrow ceiling voids
ūūDiscretely concealed in the ceiling: only the grilles are visible
ūūFlexible installation as the air suction direction can be altered from rear to bottom suction
FXDQ-M9
Slim concealed
ceiling unit
ūūSlim design for flexible installation
ūūCompact dimensions enable installation in narrow ceiling voids
ūūMedium external static pressure up to 44Pa
ūūOnly grilles are visible
ūūSmall capacity unit developted for small of well-insulated rooms
ūūReduced energy consumption thanks to DC fan motor
FXDQ-A
ūūOptimum comfort guaranteed no matter the length of ductwork or type of grilles
ūūAutomatic air flow adjustment function measures the air volume and static pressure and adjusts it towards the
Concealed ceiling nominal air flow, guaranteeing comfort
unit with medium ūūMedium external static pressure up to 140Pa
ūūOnly grilles are visible
ESP
ūūReduced energy consumption thanks to DC fan motor
ūūFlexible installation as the air suction direction can be altered from rear to bottom suction
FXSQ-A
ūūESP up to 200, ideal for large sized spaces
ūūOptimum comfort guaranteed no matter the length of ductwork or type of grilles, thanks to automatic air flow
Concealed ceiling adjustment
unit with high ESP ūūOnly grilles are visible
ūūReduced energy consumption thanks to DC fan motor
ūūFlexible installation as the air suction direction can be altered from rear to bottom suction
FXMQ-P7
Concealed ceiling ūūESP up to 270, ideal for extra large sized spaces
ūūOnly grilles are visible
unit with high ESP ūūLarge capacity unit: up to 31.5 kW heating capacity
FXMQ-MA
ūūFor rooms with no false ceilings nor free floor space
ūūFlat, stylish front panel blends easily with any interior décor and is more easy to clean
Wall mounted unit ūūCan easily be installed in both new and refurbishment projects
ūūSmall capacity unit developted for small of well-insulated rooms
ūūReduced energy consumption thanks to DC fan motor
ūūThe air is comfortably spread up- and downwards thanks to 5 different discharge angles
Preliminary
FXAQ-P
ūūFor wide rooms with no false ceilings nor free floor space
ūūIdeal for comfortable air flow in wide rooms thanks to Coanda effect
ūūEven rooms with ceilings up to 3.8m can be heated up or cooled down very easily!
ūūCan easily be installed in both new and refurbishment projects
ūūCan even be mounted in corners or narrow spaces without any problem
ūūReduced energy consumption thanks to DC fan motor
FXHQ-A
ūūUnique Daikin unit for high rooms with no false ceilings nor free floor space
4-way blow ceiling ūūEven rooms with ceilings up to 3.5m can be heated up or cooled down very easily!
ūūCan easily be installed in both new and refurbishment projects
suspended unit
ūūFlexibility to suit every room layout
ūūReduced energy consumption thanks to DC fan motor
FXUQ-A
ūūFor perimeter zone air conditioning
ūūCan be installed in front of glass walls or free standing as both the front and the back are finished
Floor standing unit ūūIdeal for installation beneath a window
ūūStylish unit blends easily with any interior
ūūRequires very little installation space
ūūWall mounted installation facilitates cleaning beneath the unit
FXLQ-P
Concealed floor
standing unit
Cooling capacity (kW)1
Heating capacity (kW)2
22
Product name
FXFQ-A
ūūThin, lightweight design installs easily in narrow ceiling spaces
ūūDepth of all units is 620mm, ideal for narrow ceiling spaces
2-way blow ceiling ūūFlexibility to suit every room layout
mounted cassette ūūReduced energy consumption thanks to DC fan motor
ūūStylish unit blends easily with any interior. The flaps close entirely when the unit is not operating
ūūOptimum comfort guaranteed with automatic air flow adjustment to the required load
Ceiling
suspended unit
Ceiling
suspended
ūū360° air discharge for optimum efficiency and comfort
ūūAuto cleaning function ensures high efficiency
ūūIntelligent sensors save energy and maximize comfort
ūūFlexibility to suit every room layout
ūūLowest installation height in the market!
ūūIdeal for installation in offices, hotels and residential applications
ūūDiscretely concealed in the wall, leaving only the suction and discharge grilles visible
ūūCan even be installed underneath a window
ūūRequires very little installation space as the depth is only 200mm
ūūHigh ESP allows flexible installation
FXNQ-A
Indoor units
Capacity class (kW)
15

20
25
32
40
50
63


















71
80
100
125































250





200



140




















1.7
2.2
2.8
3.6
4.5
5.6
7.1
8.0
9.0
11.2
14.0
16.0
22.4
28.0
1.9
2.5
3.2
4.0
5.0
6.3
8.0
9.0
10.0
12.5
16.0
18.0
25.0
31.5
23
Stylish indoor units
overview
RXYSQ-P8Y1
Type
Model
Ceiling
mounted
cassette
(incl. auto-cleaning function*)
Round flow cassette
Concealed
ceiling
Wall
mounted
Ceiling
suspended
Floor
standing
15
20
25
FCQG-F
 


 




35
42
50
60
71
Fully flat
cassette
FFQ-C
 
Small concealed ceiling unit
FDBQ-B

Slim concealed ceiling unit
FDXS-F(9)
 
 


Concealed ceiling unit
with inverter-driven fan
FBQ-D

 


Daikin Emura
Wall mounted unit
FTXG-LW/LS
Wall mounted unit
CTXS-K
FTXS-K
Wall mounted unit
FTXS-G
Ceiling suspended unit
FHQ-C
Nexura floor standing unit
FVXG-K
 


Floor standing unit
FVXS-F
 

Flexi type unit
FLXS-B(9)
 
 
* Decoration panel BYCQ140CG + BRC1E52A/B needed
24
Product name
RXYQ-T

Capacity class (kW)
RYYQ-T
RXYSQ-P8V1
Connectable outdoor unit
  





     





















 

 
Ventilation range
overview
Five components of
indoor air quality
Ventilation
ūū Ventilation: ensures the provision of fresh air
ūū Heat recovery: recovers heat and moisture from
the outgoing air to maximise comfort and efficiency
ūū Air processing: heats or cools incoming fresh air
maximising comfort and minimizing the load on
the air conditioning installation
ūū Humidification: optimises the balance between
indoor and outdoor humidity
ūū Filtration: removes dust, pollution and odours from
the air
Heat recovery
Air
processing
Humidification
Filtration
Air flow rate (m3/h)*
Type
Product name
0 2002004004006006008008001,000
1,000
1,500
2,000
2,000
4,000
4,000
6,000
6,000
8,000
140,000
Components of
indoor air quality
Heat reclaim
ventilation
Air handling
units
VAM-FA/FB
› Ventilation
› Heat recovery
VKM-GB
› Ventilation
› Heat recovery
› Air processing
VKM-GBM
› Ventilation
› Heat recovery
› Air processing
› Humidification
DX total fresh
air package
› Ventilation
› Heat recovery
› Air processing
› Humidification
› Filtration
**
* Air flow rate is a calculated indication only, based on the following values: heating capacity EKEXV-kit * 200m³/h
** Daikin AHU connected to Daikin chiller solution
25
Overview additional
options
Biddle air curtain range
Type
Product name
Biddle air curtain free hanging
CYV S/M/L-DK-F
Biddle air curtain cassette
CYV S/M/L-DK-C
Biddle air curtain recessed
CYV S/M/L-DK-R
Door height (m)
2.3
S
3.0
2.5
2.15
L
M
S
2.4
2.75
2.0
L
M
S
2.5
2.3
M
L
Favourable
Normal
Unfavourable
Covered shopping mall or
No opposite open doors,
Location at a corner or
revolving door entrance
little direct wind, building
square, multiple floors and/
with ground floor only
or open stairwell
Hydrobox range
Capacity class (kW)
Type
Product name
80
125
Leaving water
temperature range
Low
temperature
hydrobox
HXY-A


5 °C - 45 °C
High
temperature
hydrobox
HXHD-A

25 °C - 80 °C
Network solutions
Type
Screen
Integration
Control
Monitoring
Options
Other
26
ITC
Layout screen
Touch screen
Mini BMS for heating, air conditioning applied systems and refrigeration units (BACnet and WAGO)
3rd party equipment integration (BACnet and WAGO)
Basic control functions: on/off, temp, setting, air flow sttings
Refrigerant containment check
Temperature limitation
Setback
Automatic changeover
Weekly schedule and special day pattern
Timer extension
Forced off
Basic control functions: ON/OFF status, operation mode, set point temp.
Filter status
Malfunction code
History (operation, malfunction…)
Visualisation
PPD
Web access and control
HTTP option
Interlock
Pre-cool/heat
Sliding temperature
Free cooling
ACNSS connection Air Conditionning Network Service System
Maximum indoor unit groups
ITM
DMS-IF
BACNET
64
4x64
Std
64
2560
VRV IV S-series
VRV IV S-series
Space saving solution without
compromising on efficiency
In 2015 our successful Mini VRV range
gets a thorough update to make it
even better suited for light commercial
applications where space is limited and
performance expectations are high.
ūū Variable Refrigerant Temperature
ūū Connect a wide range of up to 9 indoor units: either connect VRV
or stylish indoor units (Daikin Emura, Nexura, …)
ūū All indoor units can be individually controlled
ūū Connects to all VRV control, ventilation, air handling units and
Biddle air curtains
ūū Space saving design
ūū More flexibility through extension of the range
Preliminary
ūū The most compact VRV
ūū Low height resulting in minimum visual impact
ūū Lightweight reduces installation time and
manpower to an absolute minimum
ūū Available in single phase
4-5 HP
ūū Available in single phase and three phase
ūū Extended range with 8, 10 and 12 HP unit for bigger
applications with space limitations (expected end
of 2015)
4-5-6-8-10-12 HP
27
REYQ-T
VRV IV heat recovery
REYQ
Outdoor system
8T
10T
12T
14T
16T
18T
20T
8
10
12
14
16
18
20
Capacity range
HP
kW
22.4
28.0
33.5
40.0
45.0
50.4
56.0
Cooling capacity Nom.
kW
22.4/25.0
28.0/31.5
33.5/37.5
40.0/45.0
45.0/50.0
50.4/56.5
56.0/63.0
Heating capacity Nom./Max.
Nom.
kW
5.31
7.15
9.23
10.7
12.8
15.2
18.6
Power input - 50Hz Cooling
Heating
Nom./Max.
kW
4.75/5.51
6.29/7.38
8.05/9.43
9.60/11.3
11.2/12.9
12.3/14.3
14.9/17.5
4.22
3.92
3.63
3.74
3.52
3.32
3.01
EER
COP - Max.
4.54
4.27
3.98
3.88
3.95
3.60
COP - Nom.
4.72
4.45
4.16
4.17
4.02
4.10
3.76
ESEER - Automatic
7.41
7.37
6.84
7.05
6.63
6.26
5.68
ESEER - Standard
6.25
5.78
5.36
5.45
5.14
4.84
4.39
Maximum number of connectable indoor units
64
Indoor index connection Min./Nom./Max.
100/200/260 125/250/325 150/300/390 175/350/455 200/400/520 225/450/585 250/500/650
Dimensions
Unit
HeightxWidthxDepth
mm
1,685x930x765
1,685x1,240x765
Weight
Unit
kg
210
218
304
305
337
Fan
Air flow rate
Cooling Nom.
m³/min
162
175
185
223
260
251
261
Nom.
dBA
78
79
81
86
88
Sound power level Cooling
Nom.
dBA
58
61
64
65
66
Sound pressure level Cooling
Min.~Max.
°CDB
-5.0~43.0
Operation range Cooling
Heating
Min.~Max.
°CWB
-20~15.5
Type
R-410A
Refrigerant
OD
mm
9.52
12.7
15.9
Piping connections Liquid
Gas
OD
mm
19.1
22.2
28.6
Discharge gas
OD
mm
15.9
19.1
22.2
28.6
Total piping length System
Actual
m
1,000
3N~/50/380-415
Phase/Frequency/Voltage
Hz/V
Power supply
Current - 50Hz
Maximum fuse amps (MFA)
A
20
25
32
40
50
Outdoor system
System
Outdoor unit module 1
Outdoor unit module 2
Capacity range
Cooling capacity Nom.
Heating capacity Nom./Max.
Nom.
Power input - 50Hz Cooling
Heating
Nom./Max.
EER
COP - Max.
COP - Nom.
ESEER - Automatic
ESEER - Standard
Maximum number of connectable indoor units
Indoor index connection Min./Nom./Max.
OD
Piping connections Liquid
Gas
OD
Discharge gas
OD
Total piping length System
Actual
Maximum fuse amps (MFA)
Current - 50Hz
Continuous heating
Outdoor system
System
Outdoor unit module 1
Outdoor unit module 2
Outdoor unit module 3
Capacity range
Cooling capacity Nom.
Heating capacity Nom./Max.
Nom.
Power input - 50Hz Cooling
Heating
Nom./Max.
EER
COP - Max.
COP - Nom.
ESEER - Automatic
ESEER - Standard
Maximum number of connectable indoor units
Indoor index connection Min./Nom./Max.
OD
Piping connections Liquid
Gas
OD
Discharge gas
OD
Total piping length System
Actual
Maximum fuse amps (MFA)
Current - 50Hz
Continuous heating
REYQ
HP
kW
kW
kW
kW
mm
mm
mm
m
A
REYQ
10T
13T
16T
REMQ5T
REMQ5T
REYQ8T
10
13
16
28.0
36.4
44.8
28.0/32.0 36.4/41.0 44.8/50.0
6.34
8.48
10.62
5.42/6.50 7.46/8.76 9.50/11.02
4.42
4.29
4.22
4.92
4.68
4.54
5.17
4.88
4.72
7.77
7.54
7.41
6.55
6.36
6.25
18T
20T
22T
REYQ8T
REYQ10T
REYQ10T
REYQ12T
18
20
22
50.4
55.9
61.5
50.4/56.5 55.9/62.5 61.5/69.0
12.46
14.54
16.38
11.04/12.89 12.80/14.94 14.34/16.81
4.04
3.84
3.75
4.38
4.18
4.10
4.57
4.37
4.29
7.38
7.06
7.07
5.98
5.68
5.54
64
125/250/325 162.5/325/422.5 200/400/520 225/450/585 250/500/650 275/550/715
9.52
12.7
15.9
22.2
28.6
19.1
22.2
500
40
50
v
24T
26T
28T
30T
REYQ8T
REYQ12T
REYQ16T REYQ14T REYQ16T REYQ18T
24
26
28
30
67.4
73.5
78.5
83.9
67.4/75.0 73.5/82.5 78.5/87.5 83.9/94.0
18.11
19.93
22.03
24.43
15.95/18.41 17.65/20.73 19.25/22.33 20.35/23.73
3.72
3.69
3.56
3.43
4.07
3.98
3.92
3.96
4.23
4.16
4.08
4.12
6.87
6.95
6.72
6.48
5.46
5.41
5.23
5.03
300/600/780
28.6
350/700/910 375/750/975 400/800/1,040
19.1
34.9
1,000
63
40T
42T
44T
46T
48T
50T
REYQ10T
REYQ12T REYQ14T
REYQ16T
REYQ12T
REYQ16T
REYQ18T
REYQ16T
HP
40
42
44
46
48
50
kW
111.9
118.0
123.5
130.0
135.0
140.4
kW
111.9/125.5 118.0/131.5 123.5/137.5 130.0/145.0 135.0/150.0 140.4/156.5
kW
31.58
32.75
34.83
36.3
38.4
40.8
kW
26.64/31.11 28.69/33.18 30.45/35.23 32.00/37.1 33.6/38.7 34.7/40.1
3.54
3.60
3.55
3.58
3.52
3.44
4.03
3.96
3.90
3.91
3.88
3.90
4.20
4.11
4.06
4.02
4.05
6.68
6.79
6.68
6.75
6.63
6.49
5.20
5.28
5.20
5.23
5.14
5.03
64
425/850/1,105 450/900/1,170 475/950/1,235 500/1,000/1,300 525/1,050/1,365 550/1,100/1,430 575/1,150/1,495 600/1,200/1,560 625/1,250/1,625
mm
19.1
mm 34.9
41.3
mm 28.6
28.6
34.9
m
1,000
A
80
100
125
v
Outdoor unit module
REMQ
Dimensions
Unit
Height/Width/Depth
mm
Unit
kg
Weight
Air flow rate
Cooling Nom.
m³/min
Fan
Nom.
dBA
Sound power level Cooling
Nom.
dBA
Sound pressure level Cooling
Min.~Max.
°CDB
Operation range Cooling
Heating
Min.~Max.
°CWB
Type
Refrigerant
Phase/Frequency/Voltage
Hz/V
Power supply
Current - 50Hz
Maximum fuse amps (MFA)
A
34T
36T
38T
REYQ16T
REYQ8T
REYQ18T REYQ20T REYQ12T
REYQ18T
34
36
38
95.4
101.0
106.3
95.4/106.5 101.0/113.0 106.3/119.0
28.0
31.4
29.74
23.5/27.2 26.1/30.4 25.10/29.24
3.41
3.22
3.57
3.92
3.72
4.07
4.06
3.87
4.24
6.43
6.06
6.66
4.97
4.70
5.25
325/650/845
80
52T
54T
REYQ18T
REYQ18T
REYQ18T
52
54
145.8
151.2
145.8/163.0 151.2/169.5
43.2
45.6
35.8/41.5 36.9/42.9
3.38
3.32
3.93
3.95
4.07
4.10
6.37
6.26
4.93
4.84
650/1,300/1,690 675/1,350/1,755
5T
1,685/930/765
210
162
77
56
-5.0~43.0
-20~15.5
R-410A
3N~/50/380-415
20
Actual number of connectable indoor units depends on the indoor unit type (VRV indoor, Hydrobox, RA indoor, etc.) and the connection ratio restriction for the system (50% <= CR <= 130%)
28
32T
REYQ16T
REYQ16T
32
90.0
90.0/100.0
25.6
22.4/25.8
3.52
3.88
4.02
6.63
5.14
RYYQ-T / RXYQ-T and RXYQQ-T
VRV IV heat pump with/without continuous heating and
Replacement VRV IV heat pump
RYYQ/RXYQ/RXYQQ
Outdoor unit
8T
10T
12T
14T
16T
18T
20T
8
10
12
14
16
18
20
Capacity range
HP
kW
22.4
28.0
33.5
40.0
45.0
50.0
56.0
Cooling capacity Nom.
kW
22.4/25.0
28.0/31.5
33.5/37.5
40.0/45.0
45.0/50.0
50.0/56.0
56.0/63.0
Heating capacity Nom./Max.
Nom.
kW
5.21
7.29
8.98
11.0
13.0
14.7
18.5
Power input - 50Hz Cooling
Heating
Nom./Max.
kW
4.75/5.51
6.29/7.38
7.77/9.10
9.52/11.2
11.1/12.8
12.4/14.4
14.5/17.0
4.30
3.84
3.73
3.64
3.46
3.40
3.03
EER
6.37(1)/7.53(2) 5.67(1)/7.20(2) 5.50(1)/6.96(2) 5.31(1)/6.83(2) 5.05(1)/6.50(2) 4.97(1)/6.38(2) 4.42(1)/5.67(2)
ESEER
4.72/4.54
4.45/4.27
4.31/4.12
4.20/4.02
4.05/3.91
4.03/3.89
3.86/3.71
COP
64(3)
Maximum number of connectable indoor units
100/200/260 125/250/325 150/300/390 175/350/455 200/400/520 225/450/585 250/500/650
Indoor index connection Min./Nom./Max.
Unit
HeightxWidthxDepth
mm
1,685x930x765
1,685x1,240x765
Dimensions
Unit
kg
261
268
364
398
Weight
Air flow rate
Cooling Nom.
m³/min
162
175
185
223
260
251
261
Fan
Nom.
dBA
78
79
81
86
88
Sound power level Cooling
Nom.
dBA
58
61
64
65
66
Sound pressure level Cooling
Min.~Max.
°CDB
-5~43
Operation range Cooling
Heating
Min.~Max.
°CWB
-20~15.5
Type
R-410A
Refrigerant
OD
mm
9.52
12.7
15.9
Piping connections Liquid
Gas
OD
mm
19.1
22.2
28.6
Total piping length System
Actual
m
1,000
3N~/50/380-415
Phase/Frequency/Voltage
Hz/V
Power supply
Current - 50Hz
Maximum fuse amps (MFA)
A
20
25
32
40
50
Outdoor system
System
RYYQ/RXYQ/RXYQQ
Outdoor unit module 1
Outdoor unit module 2
Capacity range
Cooling capacity Nom.
Heating capacity Nom./Max.
Nom.
Power input - 50Hz Cooling
Heating
Nom./Max.
EER
ESEER
COP
Maximum number of connectable indoor units
Min.
Indoor index
Nom.
connection
Max.
OD
Piping connections Liquid
Gas
OD
Total piping length System
Actual
Current - 50Hz
Maximum fuse amps (MFA)
Outdoor system
System
HP
kW
kW
kW
kW
mm
mm
m
A
RYYQ/RXYQ/RXYQQ
Outdoor unit module 1
Outdoor unit module 2
Outdoor unit module 3
Capacity range
Cooling capacity Nom.
Heating capacity Nom./Max.
Nom.
Power input - 50Hz Cooling
Heating
Nom./Max.
EER
ESEER
COP
Maximum number of connectable indoor units
Min.
Indoor index
Nom.
connection
Max.
OD
Piping connections Liquid
Gas
OD
Total piping length System
Actual
Current - 50Hz
Maximum fuse amps (MFA)
HP
kW
kW
kW
kW
mm
mm
m
A
Outdoor unit module
RYMQ
Dimensions
Unit
Height/Width/Depth
mm
Unit
kg
Weight
Air flow rate
Cooling Nom.
m³/min
Fan
Nom.
dBA
Sound power level Cooling
Nom.
dBA
Sound pressure level Cooling
Min.~Max.
°CDB
Operation range Cooling
Heating
Min.~Max.
°CWB
Type
Refrigerant
Phase/Frequency/Voltage
Hz/V
Power supply
Current - 50Hz
Maximum fuse amps (MFA)
A
22T
24T
26T
28T
30T
32T
34T
36T
10
8
12
16
12
16
14
16
18
16
18
20
22
24
26
28
30
32
34
36
61.5
67.4
73.5
78.5
83.5
90.0
95.0
101.0
61.5/69.0
67.4/75.0
73.5/82.5
78.5/87.5
83.5/93.5
90.0/100.0
95.0/106.0
101.0/113.0
16.27
18.2
20.0
22.0
23.7
26.0
27.7
31.5
14.06/16.48
15.85/18.31
17.29/20.30
18.87/21.90
20.17/23.50
22.2/25.6
23.5/27.2
25.6/29.8
3.77
3.70
3.68
3.57
3.52
3.46
3.43
3.21
5.58(1)/7.07(2) 5.42(1)/6.81(2) 5.39(1)/6.89(2) 5.23(1)/6.69(2) 5.17(1)/6.60(2) 5.05(1)/6.50(2) 5.01(1)/6.44(2) 4.68(1)/6.02(2)
4.37 / 4.19
4.25 / 4.10
4.25 / 4.06
4.16 / 4.00 4.14 / 3.98 4.05 / 3.91
4.04 / 3.90
3.95 / 3.79
64(3)
275
300
325
350
375
400
425
450
550
600
650
700
750
800
850
900
715
780
845
910
975
1,040
1,105
1,170
15.9
19.1
28.6
34.9
41.3
1,000
63
80
38T
40T
42T
44T
46T
8
10
10
12
14
10
12
16
20
18
16
38
40
42
44
46
106.0
111.5
118.0
123.5
130.0
106.4/119.5 111.5/125.0 118.0/131.5 123.5/137.5 130.0/145.0
31.0
33.3
35.0
37.0
25.54/29.89 26.46/30.88 28.49/32.98 29.97/34.70 31.72/36.8
3.42
3.61
3.54
3.51
5.03(1)/6.36(2) 5.29(1)/6.74(2) 5.19(1)/6.65(2) 5.17(1)/6.62(2) 5.13(1)/6.60(2)
4.17 / 4.00 4.21 / 4.05 4.14 / 3.99 4.12 / 3.96 4.10 / 3.94
64(3)
475
500
525
550
575
950
1,000
1,050
1,100
1,150
1,235
1,300
1,365
1,430
1,495
19.1
41.3
1,000
100
8T
188
162
78
20
10T
1,685/930/765
195
175
79
58
25
12T
14T
185
223
48T
50T
16
52T
48
135.0
135.0/150.0
39.0
33.3/38.4
3.46
5.05(1)/6.50(2)
4.05 / 3.91
50
140.0
140.0/156.0
40.7
34.6/40.0
3.44
5.02(1)/6.46(2)
4.05 / 3.90
600
1,200
1,560
625
1,250
1,625
54T
18
18
18
52
54
145.0
150.0
145.0/162.0 150.0/168.0
42.4
44.1
35.9/41.6 37.2/43.2
3.42
3.40
4.99(1)/6.42(2) 4.97(1)/6.38(2)
4.04 / 3.89 4.03 / 3.89
650
1,300
1,690
675
1,350
1,755
125
16T
18T
1,685/1,240/765
309
81
61
-5~43
-20~15.5
R-410A
3N~/50/380-415
32
20T
319
260
251
86
64
65
40
261
88
66
50
(1) The STANDARD ESEER value corresponds with normal VRV IV heat pump operation, not taking into account advanced energy saving operation functionality
(2) The AUTOMATIC ESEER corresponds with normal VRV IV heat pump operation, taking into account the advanced energy saving functionality (variable refrigerant temperature)
(3) Actual number of indoor units depends on the indoor unit type (VRV indoor, hydrobox, RA indoor, etc) and the connection ratio restriction for the system (50% ≤ CR ≤ 130%)
29
RWEYQ-T
VRV IV water cooled series
Standard operation
Outdoor unit
System
Geothermal operation
RWEYQ
Outdoor unit module 1
Outdoor unit module 2
Outdoor unit module 3
Capacity range
HP
Cooling capacity Nom.
kW
Heating capacity Nom.
kW
Power input - 50Hz Cooling
Nom.
kW
Heating
Nom.
kW
EER
COP
Maximum number of connectable indoor units
Indoor index
Min.
connection
Nom.
Max.
Dimensions
Unit
HeightxWidthxDepth
mm
Weight
Unit
kg
Fan
Air flow rate
Cooling Nom.
m³/min
Sound power level Cooling
Nom.
dBA
Sound pressure level Cooling
Nom.
dBA
°CDB
Operation range Inlet water
Cooling Min.~Max.
temperature
°CWB
Heating Min.~Max.
Refrigerant
Type
Piping connections Liquid
OD
mm
Gas
OD
mm
Discharge gas
OD
mm
Water
Inlet/Outlet
Total piping length System
Actual
m
Power supply
Phase/Frequency/Voltage
Hz/V
Current - 50Hz
Maximum fuse amps (MFA)
A
8T
10T
16T
18T
20T
24T
26T
28T
30T
RWEYQ8T RWEYQ10T
RWEYQ8T
RWEYQ10T
RWEYQ8T
RWEYQ10T
RWEYQ8T
RWEYQ10T
RWEYQ8T
RWEYQ10T
RWEYQ8T
RWEYQ10T
8
10
16
18
20
24
26
28
30
22.4
28.0
44.8
50.4
56.0
67.2
72.8
78.4
84.0
25.0
31.5
50.0
56.5
63.0
75.0
81.5
88.0
94.5
4.42
6.14
8.8
10.6
12.3
13.3
15.0
16.7
18.4
4.21
6.00
8.4
10.2
12.0
12.6
14.4
16.2
18.0
5.07
4.56
5.07
4.77
4.56
5.07
4.86
4.69
4.56
5.94
5.25
5.94
5.53
5.25
5.94
5.65
5.43
5.25
36
100
125
200
225
250
300
325
350
375
200
250
400
450
500
600
650
700
750
260
325
520
585
650
780
845
910
975
1,000x780x550
137
50
51
53
54
55
56
10~45
-10~45
R-410A
9.52
12.7
15.9
19.1
19.10 (1)
22.2 (1)
28.6 (1)
34.9 (1)
15.9 (2) / 19.10 (3) 19.1 (2) / 22.10 (3)
22.2 (2) / 28.60 (3)
28.6 (2) / 34.90 (3)
PT1 1/4B internal thread/PT1 1/4B internal thread
300
3N~/50/380-415
20
32
50
(1) In case of heat pump system, gas pipe is not used (2) In case of heat recovery system (3) In case of heat pump system
30
BS1Q-A
Individual branch selector – VRV IV heat recovery
Indoor unit
Power input
Cooling
Nom.
Heating
Nom.
Maximum number of connectable indoor units
Maximum capacity index of connectable indoor units
Dimensions
Unit
HeightxWidthxDepth
Weight
Unit
Casing
Material
Piping connections Outdoor unit
Liquid
Type/OD
Gas
Type/OD
Discharge gas Type/OD
Indoor unit
Liquid
Type/OD
Gas
Type/OD
Sound absorbing thermal insulation
Power supply
Phase/Frequency/Voltage
Total circuit
Maximum fuse amps (MFA)
BS-Q14A
BS
kW
kW
mm
kg
1Q25A
8
100<x≤160
207x388x326
160<x≤250
12
15
Galvanised steel plate
Brazing connection/9.5
Brazing connection/15.9
Brazing connection/22.2
Brazing connection/12.7
Brazing connection/19.1
Brazing connection/9.5
Brazing connection/15.9
Brazing connection/22.2
Foamed polyurethane Flame-resistant needle felt
1~/50/220-240
15
mm
mm
mm
mm
mm
Hz/V
A
Multi branch selector – VRV IV heat recovery
BS
Cooling
Nom.
kW
Heating
Nom.
kW
Maximum number of connectable indoor units
Maximum number of connectable indoor units per branch
Number of branches
Maximum capacity index of connectable indoor units
Maximum capacity index of connectable indoor units per branch
Dimensions
Unit
HeightxWidthxDepth
mm
Weight
Unit
kg
Casing
Material
Piping connections Outdoor unit
Liquid
OD
mm
Gas
OD
mm
Discharge gas OD
mm
Indoor unit
Liquid
OD
mm
Gas
OD
mm
Drain
Sound absorbing thermal insulation
Power supply
Phase/Frequency/Voltage
Hz/V
Total circuit
Maximum fuse amps (MFA)
A
4Q14A
0.043
0.043
20
6Q14A
0.064
0.064
30
8Q14A
0.086
0.086
40
4
400
6
600
8
10Q14A
0.107
0.107
50
12Q14A
0.129
0.129
60
16Q14A
0.172
0.172
64
12
16
5
10
750
140
298x370x430
17
298x580x430
24
9.5
22.2 / 19.1
19.1 / 15.9
12.7
28.6 / 22.2
19.1 / 22.2
298x820x430
26
35
38
Galvanised steel plate
12.7 / 15.9
15.9
15.9 / 19.1
28.6
28.6 / 34.9
19.1 / 22.2 / 28.6
28.6
9.5 / 6.4
15.9 / 12.7
VP20 (I.D. 20/O.D. 26)
Urethane foam, polyethylene foam
1~/50/220-440
15
298x1,060x430
50
19.1
34.9
Individual branch selector – Water cooled VRV IV heat recovery
Indoor unit
Power input
Cooling
Nom.
Heating
Nom.
Maximum number of connectable indoor units
Maximum capacity index of connectable indoor units
Dimensions
Unit
HeightxWidthxDepth
Weight
Unit
Casing
Material
Piping connections Outdoor unit
Liquid
Type/OD
Gas
Type/OD
Discharge gas Type/OD
Indoor unit
Liquid
Type/OD
Gas
Type/OD
Sound absorbing thermal insulation
Power supply
Phase/Frequency/Voltage
Total circuit
Maximum fuse amps (MFA)
BSV4Q-PV/BSV6Q-PV
Indoor unit
Power input
1Q16A
0.005
0.005
5
15 < x ≤ 100
Indoor unit
Power input
BSVQ-P9B
1Q10A
BSVQ
kW
kW
100P9B
160P9B
0.005
0.005
6
15 < x ≤ 100
mm
kg
mm
mm
mm
mm
mm
Hz/V
A
250P9B
8
100<x≤160
207x388x326
160<x≤250
12
15
Galvanised steel plate
Brazing connection/9.5
Brazing connection/15.9
Brazing connection/22.2
Brazing connection/12.7
Brazing connection/12.7
Brazing connection/19.1
Brazing connection/9.5
Brazing connection/15.9
Brazing connection/15.9
Brazing connection/22.2
Foamed polyurethane Flame-resistant needle felt
1~/50/220-240
15
Multi branch selector – Water cooled VRV IV heat recovery
BSV4Q-PV/BSV6Q-PV
Cooling
Nom.
kW
Heating
Nom.
kW
Maximum number of connectable indoor units
Maximum number of connectable indoor units per branch
Number of branches
Maximum capacity index of connectable indoor units
Maximum capacity index of connectable indoor units per branch
Dimensions
Unit
HeightxWidthxDepth
mm
Weight
Unit
kg
Casing
Material
Piping connections Outdoor unit
Liquid
Type/OD
mm
Gas
Type/OD
mm
Discharge gas Type/OD
mm
Indoor unit
Liquid
Type/OD
mm
Gas
Type/OD
mm
Sound absorbing thermal insulation
Power supply
Phase/Frequency/Voltage
Hz/V
Total circuit
Maximum fuse amps (MFA)
A
4Q100PV
0.020
0.020
24
6Q100PV
0.030
0.030
36
6
4
400
6
600
100
209x1,053x635
60
209x1,577x635
89
Galvanised steel plate
Brazing connection/12.7
Brazing connection/15.9
Brazing connection/28.6
Brazing connection/19.1
Brazing connection/28.6
Brazing connection/9.5
Brazing connection/15.9
Foamed polyurethane Flame-resistant needle felt
1~/50/220-240
15
31
Heat Recovery
360°
installation
efficiency
efficiency
design
efficiency
operational
efficiency
FAST
design
+
QUICK
installation
+
MORE
free heat
+
MAX
comfort
Daikin Europe N.V. Naamloze Vennootschap · Zandvoordestraat 300 · 8400 Oostende · Belgium · www.daikin.eu · BE 0412 120 336 · RPR Oostende (Responsible Editor)
ECPEN15 - 206
500 · 10/14
The present publication is drawn up by way of information only and does not
constitute an offer binding upon Daikin Europe N.V. Daikin Europe N.V. has
compiled the content of this publication to the best of its knowledge. No express
or implied warranty is given for the completeness, accuracy, reliability or fitness
for particular purpose of its content and the products and services presented
therein. Specifications are subject to change without prior notice. Daikin Europe
N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest
sense, arising from or related to the use and/or interpretation of this publication.
All content is copyrighted by Daikin Europe N.V.
The present publication supersedes ECPEN14-206. Printed on non-chlorinated
paper. Prepared by Platzer Kommunikation, Germany.