Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
32328895
Issue B
Datasheet
FEATURES
• Pressure range of 6 bar to 550 bar | 50 psi to 8,000 psi
• ±0.25% full scale accuracy Best Fit Straight Line (BFSL)
• Total Error Band (TEB) as low as 2 %FSS
• Compensated and operating temperature range of -40°C to
125°C [-40°F to 257°F] (see Table 4)
• Less than 2 ms response time
• Fully temperature compensated, calibrated and amplified
• Rated IP65 or better for protection from most harsh
environments
• RoHS, CE, UL Component Recognition for USA and Canada:
File No. E258956
DESCRIPTION
The MLH Series Heavy Duty Pressure Transducers combine
Application Specific Integrated Circuit (ASIC) technology
with a media-isolated, metal diaphragm design. This digitally
compensated transducer offers value and performance,
making it a suitable pressure sensing solution for demanding
applications. Industry standard electrical connectors and
pressure ports are offered for enhanced reliability and user
flexibility.
The MLH Series has six standard output options:
• Ratiometric: 0.5 Vdc to 4.5 Vdc from 5 Vdc excitation
• Current: 4 mA to 20 mA
• Regulated: 1 Vdc to 6 Vdc
• Regulated: 0.25 Vdc to 10.25 Vdc
• Regulated: 0.5 Vdc to 4.5 Vdc
• Regulated: 1 Vdc to 5 Vdc
VALUE TO CUSTOMERS
• Total Error Band (TEB) as low as 2 %FSS from -40°C
to 125°C: Provides indication of the transducer’s true
measurement performance over a specified temperature
range; small error promotes system uptime and efficiency. (See
Figure 1.)
• All metal wetted parts allow for potential use in a wide variety
of fluid applications.
• No internal elastomeric seals eliminate O-ring compatibility
issues.
• Amplified outputs reduce the need to purchase external
amplifiers.
• Input reverse voltage protection guards against mis-wiring.
• Less than 2 ms response time provides more accurate, high
speed measurement.
Sensing and Internet of Things
POTENTIAL APPLICATIONS
• Industrial: Compressors, cylinder tank pressure, HVAC,
hydraulics, oil and gas, refrigeration, water distribution
• Transportation: Multiple applications including braking and
alternative fuels
• Medical: Anesthesia delivery machines, blood analyzers,
chemistry analyzers, gas chromatography, oxygen
concentrators, and ventilators
PORTFOLIO
The MLH Series joins the PX3 Series, PX2 Series, SPT Series
heavy duty pressure transducers and the 13 mm Series and
19 mm Series heavy duty pressure transducers.
Figure 1. Total Error Band (TEB) Definition
Sources of Error
Offset
Full Scale Span
Pressure Non-Linearity
Pressure Hysteresis
Pressure Non-Repeatability
Thermal Effect on Offset
Thermal Effect on Span
Thermal Hysteresis
Accuracy
BFSL
Total
Error
Band
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Table 1. Pressure Range Specifications1 (At 25°C [77°F] and at rated excitation unless otherwise specified.)
bar
psi
Operating
Pressure
Proof
Pressure
Burst
Pressure
Operating
Pressure
Proof
Pressure
Burst
Pressure2
6
18
60
50
150
500
10
30
100
100
300
1000
16
48
160
150
450
1500
25
75
250
200
600
2000
40
80
400
250
750
2500
60
120
600
300
900
3000
100
200
1000
500
1500
5000
160
320
1600
1000
2000
10000
250
500
2068
2000
4000
20000
350
700
2068
3000
6000
30000
500
750
2068
5000
7500
30000
550
825
2068
8000
12000
30000
Comparable metric units follow same proof and burst specifications.
2
Bonded washer seal used on G 1/8 (DIN 3852-2) port is limited to 25000 psi burst.
1
Table 2. Electrical Specifications (At 25°C [77°F] unless otherwise noted.)
Output Signal
Characteristic
Zero output
Ratiometric
A
Current
B
Regulated
C
Regulated
D
Regulated
E
Regulated
G
0.5 Vdc
4 mA
1 Vdc
0.25 Vdc
0.5 Vdc
1 Vdc
5 Vdc
(1 Vdc to 6 Vdc)
10 Vdc
(0.25 Vdc to 10.25 Vdc)
4 Vdc
(1 Vdc to 5 Vdc)
5 Vdc
(6 Vdc max.)1
9.5 Vdc to
30 Vdc2
8 Vdc to
30 Vdc2
14 Vdc to
30 Vdc2
4 Vdc
(0.5 Vdc to 4.5
Vdc)
7 Vdc to
30 Vdc2
4 mA typ.,
8 mA max.
N/A
5 mA typ.,
17 mA max.
5 mA typ.,
17 mA max.
5 mA typ.,
17 mA max.
5 mA typ.,
17 mA max.
Source
(nominal)
1 mA
N/A
1 mA
1 mA
1 mA
1 mA
Sink
(nominal
1 mA
at zero output
N/A
A1 mA
at zero output
1 mA
at zero output
1 mA
at zero output
1 mA
at zero output
90 dB
90 dB
90 dB
90 dB
90 dB
90 dB
25 Ohm max.
N/A
25 Ohm max.
25 Ohm max.
25 Ohm max.
25 Ohm max.
Full scale
span (FSS)
Excitation
Supply
current
4 Vdc
16 mA
(0.5 Vdc to 4.5 Vdc) (4 mA to 20 mA)
Supply
rejection ratio
Output
impedance
1
2
8 Vdc to
30 Vdc2
Maintains ratiometricity at 5 ±0.25 Vdc excitation. Product can tolerate 6 Vdc excitation without damage.
See Figures 2 and 3 for more information regarding maximum excitation voltage vs. operating temperature.
Table 3. Pressure Reference Types
Pressure Reference
Sealed gage1
Description
Output is proportional to the difference between applied pressure and a built-in fixed reference to
1 atmA, where the minimum operating pressure is set to 14.7 psiA (1 atmA).
Transducer measures pressure relative to ambient pressure. Output is proportional to the difference
Vented gage (relative) 2 between applied pressure and atmospheric (ambient) pressure, where the minimum operating
pressure is set to atmospheric pressure.
2
Sensing and Internet of Things
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Table 4. Environmental and Mechanical Specifications (At 25°C [77°F] unless otherwise noted.)
Characteristic
Parameter
Material in contact with media:
port
diaphragm
stainless steel 304L
Haynes 214 alloy
Housing material
black plastic – Amodel AS-4133 HS – PPA
Weight (typical for Metri-Pack 150 and 1/8 NPT
pressure port types)
57.0 g [2.0 oz]
Shock
100 g peak [11 ms]
Vibration
MIL-STD-810C, Figure 514.2-5, Curve AK, Table 514.2-V,
Random Vibration Test (overall g rms = 20.7 min.)
Compensated and operating temperature range:
0.5 Vdc to 4.5 Vdc ratiometric output
all regulated and 4 mA to 20 mA outputs
-40°C to 125°C [-40°F to 257°F]
-40°C to 125°C [-40°F to 257°F] (See Figures 2 and 3 for operating area details.)
Storage temperature range
-40°C to 125°C [-40°F to 257°F]
Approvals
RoHS, CE, UL Component Recognition for USA and Canada: File No. E258956
Table 5. Performance Specifications (At 25°C [77°F] unless otherwise noted.)
Characteristic
Parameter
Response time
<2 ms
Accuracy :
>100 psi
<100 psi
±0.25 %FSS
±0.50 %FSS
1
Total Error Band2:
Vented gage (relative):
<300 psig
>300 psig
Sealed gage:
without L, M, P electrical connector types:
100 psis to 299 psis (-40°C to 85°C [-40°F to 185°F])
100 psis to 299 psis (>85°C to 125°C [>185°F to 257°F])
>300 psis (-40°C to 125°C [-40°F to 257°F])
with L, M, P electrical connector types:
100 psis to 299 psis (-40°C to 65°C [-40°F to 149°F])
100 psis to 299 psis (>65°C to 125°C [>149°F to 257°F])
>300 psis (-40°C to 65°C [-40°F to 149°F])
>300 psis (>65°C to 125°C [>149°F to 257°F])
±3 %FSS
±2 %FSS
±3 %FSS
±10 %FSS
±2 %FSS
±10 %FSS
±15 %FSS
±5 %FSS
±15 %FSS
Includes pressure non-linearity (BFSL), pressure hysteresis and pressure non-repeatability. Thermal errors are not included. (See
Figure 1.)
2
Includes offset error, full scale span error, pressure non-linearity (BFSL), pressure hysteresis, pressure non-repeatability, thermal
effect on offset, thermal effect on span, and thermal hysteresis. (See Figure 1.)
1
Sensing and Internet of Things
3
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Operating Temperature (°C)
Figure 2. Regulated Output Operating and Temperature Compensation
125
124
123
122
121
120
119
118
117
116
Operating and temperature
compensated area
for regulated output
6
8
10
12
14
16
18
20
22
24
26
28
30
Supply Voltage (Vdc)
Note: The dot indicates the maximum operating temperature of 125°C [257°F] with a 24 V supply.
Operating Temperature (°C)
Figure 3. Current Output Operating and Temperature Compensation
125
120
115
110
105
100
95
90
85
80
75
70
65
60
10 Ohm
load
250 Ohm
load
Operating and temperature
compensated area
for current output
6
8
10
12
14
16
18
20
22
24
26
28
30
Supply Voltage (Vdc)
Note: The operating area is extended with a 250 Ohm resistor. Higher loads extend the operating area. The dot indicates the
maximum operating temperature when using a 24 V supply and a 250 Ohm resistor.
CAUTION
PRODUCT DAMAGE DUE TO MECHANICAL ISSUES
• Ensure torque specifications are determined for the specific application. Values provided are for reference only. (Mating
materials and thread sealants can result in significantly different torque values from one application to the next.)
• When using mating parts made of stainless steel, use a thread sealant with anti-seize properties to prevent thread galling.
Ensure the sealant is rated for the application.
• Use appropriate tools (such as an open ended wrench or deep well socket) to install transducers.
• Always hand-start transducers into the hole to prevent cross threading and damage.
• Ensure that torque is not applied to the electrical connector.
• Ensure that the proper mating electrical connector with a seal is used to connect the transducer. Improper or damaged
seals can compromise ingress protection, leading to short circuits.
Failure to comply with these instructions may result in product damage.
CAUTION
PRODUCT DAMAGE DUE TO PARTICULATES
• Ensure that a filter is used upstream of the transducer to keep media flow free of larger particulates and increased humidity.
All MLH Series transducers are dead-ended devices; particulate accumulation and condensing moisture may affect
transducer output.
• It is recommend that the transducer be positioned with the port facing downwards; any particulates in the system are less
likely to enter and settle within the pressure transducer if it is in this position.
• Ensure that the media does not create a residue when dried. Build-up inside the transducer may affect transducer output;
rinsing of a dead-ended transducer is potentially difficult and has limited effectiveness in removing residue.
Failure to comply with these instructions may result in product damage.
4
Sensing and Internet of Things
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Figure 4. Nomenclature and Order GuideE
For example, MLH150PSB01B defines an MLH Series Heavy Duty Pressure Transducer, 150 psi pressure range, sealed
gage pressure reference, Metri-Pack 150 electrical connector type, 1/4-18 NPT pressure port type, 4 mA to 20 mA output.
MLH
150
P
S
B
01
B
Output Transfer Function
Series
Heavy
Duty
Pressure
Transducer1
MLH
Pressure Range
bar
006
010
016
025
040
060
100
160
250
350
500
550
6
10
16
25
40
60
100
160
250
350
500
550
psi
050
100
150
200
250
300
500
01K
02K
03K
05K
08K
Electrical Connector Type
50
100
Metri-Pack 1503
150
200
250
300
B
Cable harness,
1 meter cable
length3
L
bar
P
psi
01
B
C
D
E
G
Current: 4 mA to 20 mA
Regulated: 1 Vdc to 6 Vdc
Regulated: 0.25 Vdc to 10.25 Vdc
Regulated: 0.5 Vdc to 4.5 Vdc
Regulated: 1 Vdc to 5 Vdc
1/4-18 NPT
(ANSI B1.20.1)
54
M10x1 with O-ring seal
(ISO 6149-2)5
500
1000
2000
Hirschmann
3000
5000
8000
Pressure Reference
G Vented gage (relative)
S
Ratiometric: 0.5 Vdc to 4.5 Vdc
from 5 Vdc excitation
Pressure Port Type
C
Cable harness,
3 meter cable
length33
M
06
09
Unit
B
A
M12x1
(Brad Harrison micro)
Flying leads
D
13
P
Sealed gage2
19
DIN 43650-C, 8 mm male
Metri-Pack 150 mating connector3
11
G
50
Deutsch DTM04-3P
(integral)
51
1/8-27 NPT
(ANSI B1.20.1)
55
7/16-20 UNF
1/4 in 45º
Flare Female
Schrader with
depressor
56
1/2-14 NPT
(ANSI B1.20.1)
57
R 1/4-19 BSPT
(ISO 7-1)
58
R 1/8-28 BSPT
(ISO 7-1)
59
3/8-24 UNF with O-ring seal
(SAE J1926-2)5
7/16-20 UNF with O-ring seal
(SAE J1926-2)5
M12x1.5 with O-ring seal
(ISO 6149-2)5
M14x1.5 with O-ring seal
(ISO 6149-2)5
M16x1.5 with O-ring seal
(ISO 6149-2)5
M18x1.5 with O-ring seal
(ISO 6149-2)5
M20x1.5 with O-ring seal
(ISO 6149-2)5
60
G1/8-28 BSPP
with bonded washer
(DIN 3852-2)5, 6
61
G1/4-19 BSPP
with bonded washer
(DIN 3852-2)5, 6
62
G1/8-28 BSPP
with elastomeric seal
(ISO 1179-2)5
63
G1/4-19 BSPP
with elastomeric seal
(ISO 1179-2)5
AMP Superseal 1.54
T
52
1/2-20 UNF with O-ring seal
(SAE J1926-2)5
H
53
9/16-18 UNF with O-ring seal
(SAE J1926-2)5
Not all catalog listing combinations are available. Custom products are available. Please contact Honeywell.
Sealed gage option is only available in pressure ranges at or above 8 bar | 100 psi.
Metri-Pack 150 mating connectors with shielded cable and 22 AWG wire are available from Honeywell. Order part no. 3685301 for 1 m [3.2 ft] cable length and part no. 3685302 for 3 m
[9.8 ft] cable length.
4
Available with Output Transfer Function A only.
5
Seal accessory is included with the sensor. Seal accessory materials and specifications are: O-ring (nitrile, durometer 90, temperature range -30°C to 125°C), bonded washer (steel outer
ring with nitrile inner ring, temperature range -30°C to 125°C), elastomeric seal (nitrile, temperature range -30°C to 125°C).
6
When using the bonded washer accessory supplied by Honeywell, the customer’s female port connection design should follow DIN 3852-1: 2000-11 size large. If compliance to
DIN 3852-1:2014-05 is required, contact Honeywell for alternate options.
1
2
3
Sensing and Internet of Things
5
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Figure 5. Electrical Connector Type Mounting Dimensions (For reference only. mm/[in].)
General product marking
“H” + “P” = total nominal product length
Catalog listing
27,0 Hex flat to flat
[1.06]
Date code
“P”
“H”
B
C
D
G
Metri-Pack 150
Hirschmann
M12x1 (Brad Harrison micro)
DIN 43650-C, 8 mm male
Connector: Delphi 12078088
Mating connector: Delphi
12110192
IP rating1: IP65 (all versions)
Connector: Hirschmann G
series, 4-pole (small cubic
connector)
Mating connector: Hirschman
G4WF or equivalent
IP rating1: IP65 (all versions)
Connector: DS/EN 61076-2101 (IEC 61076-2-101)
Mating connector: 4 POS
Type D
IP rating1: IP65, IP67 (sealed
gage versions), IP65 (vented
gage versions)
Connector: DIN 43650C, 8 mm
Mating connector: DIN
43650C, 8 mm
IP rating1: IP65 (all versions)
Pin
Voltage
Output
(3-wire)
Current
Output
(2-wire)
Pin
Voltage
Output
(3-wire)
Current
Output
(2-wire)
Pin
Voltage
Output
(3-wire)
Current
Output
(2-wire)
Pin
Voltage
Output
(3-wire)
Current
Output
(2-wire)
A
+excitation
+excitation
1
no
connection
no
connection
1
+excitation
+excitation
1
+excitation
+excitation
B
common
no
connection
2
output
no
connection
2
common
-excitation
(return)
2
common
-excitation
(return)
C
output
-excitation
(return)
3
common
-excitation
(return)
3
output
no
connection
3
4
+excitation
+excitation
4
no
connection
no
connection
4
no
no
connenction connection
output
Pin C
Pin B
Pin A
Pin 3
Pin 1
Pin 4
Pin 4
Pin 3
Pin 2
No connection
Pin 2
Pin 2
Pin 1
Pin 3
Pin 1
Pin 4
ø16,51
17,0
[0.67]
[0.46]
ø16,0
ø10,0
[0.63]
“H” = 41,7
[1.64]
6
Hole
(Vented
gage
versions
only)
Sensing and Internet of Things
no
connection
“H” = 32,6
[1.28]
[0.39]
Hole
(Vented
gage
versions
only)
“H” = 33,5
[1.32]
Hole
(Vented
gage
versions
only)
“H” = 30,1
[1.19]
Hole
(Vented
gage
versions
only)
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Figure 5. Electrical Connector Type Mounting Dimensions (continued)
L
H
AMP Superseal 1.5
T
P
Cable Harness, 1 Meter
M
Deutsch DTM04-3P
(integral)
Flying Leads
Cable Harness, 3 Meter
Connector: Amp 282087
Mating connector: Amp
282087
IP rating1: IP65 (all versions)
Connector: 24 AWG with TPE
jacket
Mating connector: Flying
leads
IP rating1: IP65, IP67, IP69K
(sealed gage versions), IP65
(vented gage versions)
Pin
Voltage
Output
(3-wire)
Wire
Color
1
common
red
2
output
white
3
+excitation
Voltage
Output
(3-wire)
Current
Output
(2-wire)
+excitation +excitation
black
output
common
Connector: DTM04-3P
Mating connector: DTM063S with wedgelock WM-3S
IP rating1: IP65, IP67, IP69K
(sealed gage versions), IP65
(vented gage versions)
Connector: 6 in flying leads
with 20 AWG wire and PE
insulation
IP rating1: IP65, IP67, IP69K
(sealed gage versions), IP65
(vented gage versions)
Wire
Color
red
-excitation
white
(return)
no
connection
(black wire black
removed)
Voltage
Output
(3-wire)
Current
Output
(2-wire)
Voltage
Output
(3-wire)
Pin
Current
Output
(2-wire)
+excitation +excitation
1
+excitation +excitation
common
-excitation
(return)
2
common
-excitation
(return)
output
no
connection
(black wire
removed)
3
output
no
connection
White
Pin 3
Black
(Used for voltage
ouptut only)
White
Red
Pin 1
Pin 2
Pin 2
Black
(Used for voltage
ouptut only)
Pin 1
13,8
[0.54]
“H” = 41,0
[1.61]
13,4
[0.53]
[0.43]
[0.43]
“H” = 35,3
[1.39]
Pin 3
ø10,8
ø10,8
Hole
(Vented
gage
versions
only)
Red
Hole
(Vented
gage
versions
only)
“H” = 35,3
[1.39]
“H” = 42,6
[1.68]
Hole
(Vented
gage
versions
only)
Hole
(Vented
gage
versions
only)
IP rating is determined by the electrical connector type chosen.
Three-wire cable is required for ratiometric and regulated voltage outputs; two wire cable is required for current output.
1
2
Sensing and Internet of Things
7
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Figure 6. Pressure Port Type Mounting Dimensions (For reference only: mm/[in].)1
General product marking
“H” + “P” = total nominal product length
Catalog listing
27,0 Hex flat to flat
[1.06]
“P”
“H”
01
15,2
[0.60]
11
20,1
[0.79]
50
3/8-24 UNF (SAE J1926-2)
Seal1: O-ring
Mating geometry: SAE J1926-1
Installation torque: 10 N m [7.4 ft-lb]
13,5
[0.53]
53
9/16-18 UNF (SAE J1926-2)
Seal1: O-ring
Mating geometry: SAE J1926-1
Installation torque: 45 N m [33.2 ft-lb]
8
“P” = 15,0
[0.59]
10,2
[0.40]
16,0
[0.63]
Sensing and Internet of Things
14,7
[0.58]
51
7/16-20 UNF (SAE J1926-2)
Seal1: O-ring
Mating geometry: SAE J1926-1
Installation torque: 20 N m [14.8 ft-lb]
“P” = 19,8
[0.78]
15,0
[0.59]
54
M10x1.0 (ISO 6149-2)
Seal1: O-ring
Mating geometry: ISO 6149-2
Installation torque: 20 N m [14.8 ft-lb]
“P” = 15,9
[0.63]
“P” = 17,5
[0.69]
12,7
[0.50]
19
Seal: Pipe thread
Mating geometry: ISO 7-1
Installation Torque: 2 to 3 turns from
finger tight
“P” = 19,6
[0.77]
Seal: 45º cone
Mating geometry: SAE J512
Installation torque: 20 Nm [14.8 ft-lb]
R1/8-28 (BSPT)
R1/4-19 (BSPT)
Seal: Pipe thread
Mating geometry: ANSI B1.20.1-2013
Installation Torque: 2 to 3 turns from
finger tight
“P” = 20,8
[0.82]
Seal: Pipe thread
Mating geometry: ANSI B1.20.1-2013
Installation torque: 2 to 3 turns from
finger tight
13
1/2-14 NPT
“P” = 18,3
[0.72]
7/16-20 UNF 1/4 in 45º
Flare Female Schrader with depressor
1/8-27 NPT
Seal: Pipe thread
Mating geometry: ANSI B1.20.1-2013
Installation torque: 2 to 3 turns from
finger tight
“P” = 24,9
[0.98]
09
06
1/4-18 NPT
“P” = 20,1
[0.79]
Date code
11,1
[0.44]
Seal: Pipe thread
Mating geometry: ISO 7-1
Installation Torque: 2 to 3 turns from
finger tight
“P” = 15,0
[0.59]
10,2
[0.40]
52
1/2-20 UNF (SAE J1926-2)
Seal1: O-ring
Mating geometry: SAE J1926-1
Installation torque: 40 N m [29.5 ft-lb]
“P” = 19,8
[0.78]
15,0
[0.59]
55
M12x1.5 (ISO 6149-2)
Seal1: O-ring
Mating geometry: ISO 6149-2
Installation torque: 45 N m [33.2 ft-lb]
“P” = 18,3
[0.72]
13,5
[0.53]
Heavy Duty Pressure Transducers
MLH Series, 6 bar to 550 bar | 50 psi to 8000 psi
Figure 6. Pressure Port Type Mounting Dimensions (continued)
56
M14x1.5 (ISO 6149-2)
Seal1: O-ring
Mating geometry: ISO 6149-1
Installation torque: 45 N m [33.2 ft-lb]
“P” = 18,3
[0.72]
13,5
[0.53]
59
M20x1.5 (ISO 6149-2)
Seal1: O-ring
Mating geometry: ISO 6149-1
Installation torque: 80 N m [59.0 ft-lb]
57
“P” = 19,8
[0.78]
ø8,4
[0.33]
Seal1: Bonded washer
Mating geometry with bonded washer:
DIN 3852-1:2000-11, large
Installation torque: 50 N m [36.9 ft-lb]
“P” = 19,0
[0.75]
ø11,9
[0.47]
1,0
[0.04]
1
14,1
[0.56]
9,7
[0.38]
2,0
[0.08]
2,0
[0.08]
Bonded washer
Bonded
washer
ø10,4 ø15,9
[0.41]
[0.63]
ø13,7
[0.54]
Bonded washer
ø20,6
[0.81]
63
G1/4-19 (BSPP) ISO 1179-2
Seal1: Elastomeric
Mating geometry: ISO 1179-1
Installation torque: 50 N m [36.9 ft-lb]
“P” = 18,8
[0.74]
9,5
[0.37]
120°
61
Seal1: Bonded washer
Mating geometry with bonded washer:
DIN3852-1; 2000-11, large
Installation torque: 20 N m [14.8 ft-lb]
62
Elastomeric
seal
16,5
[0.65]
G1/4-19 (BSPP) DIN 3852-2
G1/8-28 (BSPP) ISO 1179-2
0,5
[0.02]
“P” = 21,3
[0.84]
15,0
[0.59]
60
Bonded
washer
“P” =14,3
[0.56]
Seal1: O-ring
Mating geometry: ISO 6149-1
Installation torque: 70 N m [51.6 ft-lb]
G1/8-28 (BSPP) DIN 3852-2
16,5
[0.65]
Seal1: Elastomeric
Mating geometry: ISO 1179-1
Installation torque: 20 N m [14.8 ft-lb]
M18x1.5 (ISO 6149-2)
Seal1: O-ring
Mating geometry: ISO 6149-1
Installation torque: 55 N m [40.6 ft-lb]
“P” = 14,6
[0.57]
“P” = 21,3
[0.84]
58
M16x1.5 (ISO 6149-2)
14,0
[0.55]
Proper assembly of
seal to stud end
0,8
[0.03]
Proper assembly of
seal to stud end
Elastomeric
seal
ø11,6
[0.46]
120°
ø16,5
[0.65]
1,5
[0.06]
Seal accessory included with transducer. Seal accessory material and specifications: O-ring (nitrile, durometer 90, temperature range -30 ° C
to 125° C), bonded washer (steel outer ring with nitrile inner ring, temperature range -30 ° C to 125° C), elastomeric seal (nitrile, temperature
range -30 ° C to 125° C).
Sensing and Internet of Things
9
ADDITIONAL INFORMATION
The following associated literature is available on the
Honeywell web site at sensing.honeywell.com:
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•
Product line guide
•
Product range guide
•
Product installation instructions
Failure to comply with these instructions could result in
death or serious injury.
•
Product CAD models
WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this datasheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship during the
applicable warranty period. Honeywell’s standard product
warranty applies unless agreed to otherwise by Honeywell in
writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items that Honeywell, in its sole discretion, finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all other warranties, expressed or implied, including those
of merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While Honeywell may provide application assistance
personally, through our literature and the Honeywell web site, it
is buyer’s sole responsibility to determine the suitability of the
product in the application.
For more information
Honeywell Sensing and Internet of
Things services its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or the
nearest Authorized Distributor, visit
sensing.honeywell.com or call:
Asia Pacific +65 6355-2828
Europe +44 (0) 1698 481481
USA/Canada +1-800-537-6945
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
Honeywell Sensing and Internet of Things
9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywell.com
32328895-B-EN | B | 03/18
© 2018 Honeywell International Inc. All rights reserved.