DisplayPort KVM Extender over CAT-7
up to 100 feet (30 meters)
Sender
Receiver
GTB-DPKVM-3CAT7
GTB-DPKVM-3CAT7-BLK
Extend DisplayPort and USB over three CAT-7 cables up to
100 feet (30 meters)
The DisplayPort KVM Extender over CAT-7 allows the installation of a
Hi-Def display, keyboard, mouse, and other USB peripherals up to
100 feet (30 meters) away from a computer, using two or three CAT-7
cables. Resolutions up to 1920 x 1200 (WUXGA) or 1080p Full HD
when using two CAT-7 cables, and up to 2560 x 1600 (WQXGA)
when using three cables can be supported. HDCP is also supported.
When using USB 2.0, 480 Mbps data rates are supported.
This extender is also backward compatible with USB 1.1.
How It Works
Connect the included DisplayPort cable from the computer to the
DisplayPort input of the Sender unit. Connect the included USB cable
from the computer’s USB Host Interface port to the Sender unit.
Connect the Receiver unit to a Hi-Def display using a DisplayPort
cable. Connect a keyboard, a mouse, or another USB peripheral to
the two USB ports on the Receiver unit. Connect the Sender unit to the
Receiver unit using two or three CAT-7 cables, depending on the
maximum required video resolution. First, connect the supplied 5V DC
power supplies with locking connectors to the Sender and Receiver
units. Then, connect them to available electrical outlets. Turn on the
power to the computer, the display, and any connected USB device
that is externally powered.
Features*
• Extends DisplayPort and USB up to 100 feet (30 meters)
• Supports resolutions up to 2560 x 1600 and USB over three
CAT-7 cables, and up to 1920 x 1200 or 1080p Full HD and
USB over two CAT-7 cables
• HDCP compliant
• Supports DisplayPort 1.1a
• Supports USB 2.0 at 480 Mbps
• Backward-compatible with USB 1.1
• 16-position EQ rotary switch to compensate for cable skew
• HPD Auto-Calibration button
• Pre-emphasis switch
• Drive level switch
• Boost level switches
• Power On indicator
• Independent DisplayPort and USB Link indicators
• Locking power supplies
• Surface-mountable
• Available in Black and White
Specifications*
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Video Data Rate: up to 2.7 Gbps
Video Input Connector (Sender): (1) DisplayPort, 20-pin, female
Video Output Connector (Receiver): (1) DisplayPort, 20-pin, female
USB Connector (Sender): (1) Type B, female
USB Connector (Receiver): (2) Type A, female
Link Connectors (Sender/Receiver): (3) RJ-45, shielded
EQ Switch (Receiver): (1) 16-position rotary type
HPD Auto Calibration button (Receiver): (1) tact-type
Pre-emphasis switch (Sender): (1) 3-position DIP switch
Drive level switch (Sender): (1) 3-position DIP switch
Boost level switch (Sender): (2) 3-position DIP switch
Power On indicator (Sender): (1) LED, blue
DisplayPort Link indicator (Receiver): (1) LED, green: good link, red: no link
USB Link indicators (Sender/Receiver): (1) LED, green
Power Supply connector (Sender/Receiver): 5V DC, locking type
Operating Temperature: +32 to +104 °F (0 to +40 °C)
Dimensions (W x H x D) (Sender/Receiver): 3.4" x 1.2" x 5.8"
(85mm x 30mm x 146mm)
• Shipping Weight: 2.5 lbs (1.1 kg)
X13
Gefen, LLC | 20600 Nordhoff Street, Chatsworth CA 91311 | Tel. (818) 772-9100 (800) 545-6900 | Fax (818) 772-9120 | www.gefentoolbox.com
* Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners.
A2