Battery Installation
About Your Toy
Store all your favorite jewelry in this adorable music box made just
for little girls! Watch Minnie dance along to the built-in music, or
connect your MP3 player to hear tunes from your own collection.
Back View
Power & Demo Switch
Slide the Power & Demo Switch to turn the unit to demo, off or
on. To save battery life, the unit will power off after a brief time if no
button is pressed.
Listening to a Song
Installing/Replacing the Batteries
This unit comes with 3 AA batteries already installed. These are for
in-store demonstration purposes only and should be replaced when
you get the toy home. If the sound becomes weak, distorted or the
unit does not function properly, the batteries should be replaced.
1. Using a Phillips screwdriver, open the battery compartment door
located on the bottom of the unit.
2. Insert 3 new AA (R6) batteries in the battery compartment. Make
sure batteries match the + and – as indicated in the battery
compartment diagram.
3. Replace battery compartment door. Do not overtighten screw.
Playing Your MP3 Music (MP3 Mode)
AUX Line-in
Cable
WARNING : DO NOT THROW BATTERIES AWAY WITH
HOUSEHOLD TRASH. PLEASE CONSULT LOCAL
REGULATIONS FOR PROPER BATTERY DISPOSAL.
Sing along to your own music from an MP3 player, CD player, etc
by using the MP3 Mode.
1. Find the MP3 Line-In Cord located on the back of the unit.
2. Connect the MP3 Line-In Cord to your audio device’s
headphone or line-out jack.
3. Press the
MP3 Button inside the jewelry box and then
press the Play Button on your audio device.
4. Adjust the Volume on your audio device to your desired level.
Please keep in mind that the jewelry box will automatically turn off
in 7.5 minutes to save power. To re-engage MP3 Mode once the
power turns off, press the
MP3 Button again .
For the Best Possible Performance
• We recommend the use of alkaline batteries for longer life.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries from the unit.
• Do not attempt to recharge non-rechargeable batteries.
• The supply terminals are not to be short-circuited.
• Batteries should be removed if the item will not be used for an
extended period of time, such as a month or longer, to prevent
battery leakage or damage.
• Rechargeable batteries should only be charged under adult
supervision.
• Only batteries of the same or equivalent type recommended are
to be used.
There is a fun built-in Minnie Mouse song to dance along with!
Press the
Song Button to hear it.
Power & Demo Switch
Slide switch to turn unit to
Demo/Off/On.
MP3 Button
Press to hear music playing
from a connected MP3 player
or other audio device.
Song Button
Press to hear a built-in song!
MODEL: MM-122
INSTRUCTION MANUAL
SIZE: 357W x 201Hmm
DATE: Jul 2, 2013
MATERIAL:100gsm White paper
PRINTING PURPLE (PMS 265C), 1C+1C
Maintenance
It is important to keep the unit as dry and clean as possible. You
may clean the cabinet with a cloth or sponge moistened with mild
soap and water. Do not attempt to use strong cleansers or solvents,
as they may cause damage.
Troubleshooting
• If the unit does not work at all, check the batteries. They are most
likely weak and need to be replaced with 3 brand new “AA” batteries.
If the unit still does not work after changing the batteries, then take
them out and make sure you have installed them properly.
• If there is a distorted or fuzzy sound the batteries are weak. Once
again, replace them with new alkaline batteries.
• If improper operation continues, momentarily remove then install
batteries, while making sure that you have installed them correctly.
• If the trouble persists, DO NOT ATTEMPT TO REPAIR THE UNIT.
See warranty for factory services.
FCC Information
This device complies with Part 15 of the FCC Rules, operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Questions or Comments
For questions or comments regarding this or other KIDdesigns products,
please call our toll-free number: 1-888-TOP-TOYS.
Please also visit our website: www.kiddesigns.com
Limited One Year Warranty
MP3 Speaker
KIDdesigns, a division of SDI Technologies Inc. (hereafter referred to
as SDI), warrants this product to be free from defects in workmanship
and materials, under normal use and conditions, for a period of one (1)
year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best
to first return it to the store where it was originally purchased. Should
this fail to resolve the matter and service still be required by reason of
any defect or malfunction during the warranty period, SDI will repair or,
at its discretion, replace this product without charge. This decision is
subject to verification of the defect or malfunction upon delivery of this
product to the Factory Service Center authorized by SDI Customer
Service. The product must include proof of purchase, including date
of purchase. An out-of-warranty fee for service will be charged for units
that are received without proof of purchase.
Before returning this product for service, please first replace the batteries
(if applicable) with fresh ones, as exhausted or defective batteries are
the most common cause of problems encountered.
If service is still required:
1. Call KIDdesigns Customer Service at 1-888-TOP-TOYS (867-8697)
for Return Authorization and for the address of the Factory Service Center.
2. Remove the batteries (if applicable) and pack the unit in a well-padded,
heavy corrugated box. KIDdesigns is not responsible for damage
that occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement,
or other proof of the date of purchase, if within the warranty period.
Also include your name and address information, a brief description
for why the unit is being returned, and the return authorization number.
No unit can be processed without a return authorization number.
4. Write the return authorization number on the side of the shipping
package and send the unit prepaid and insured to the Factory Service
Center address authorized by KIDdesigns Customer Service.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose
for which it was designed. It does not cover (i) products which have
been damaged by negligence or willful actions, misuse or accident, or
which have been modified or repaired by unauthorized persons; (ii)
cracked or broken cabinets, or units damaged by excessive heat; (iii)
damage to digital media players, CD’s or tape cassettes (if applicable);
(iv) the cost of shipping this product to the Factory Service Center and
its return to the owner. This warranty is valid only in the United States
of America and does not extend to owners of the product other than
to the original purchaser. In no event will KIDdesigns or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members
or agents be liable to you or any third party for any consequential or
incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not
apply to you.)
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide
by the above mentioned disclaimer of warranty is contractually binding
to you upon your transfer of currency (money order, cashier's check,
or credit card) for purchase of your KIDdesigns product.
Manufactured and Distributed by KIDdesigns, Inc.
Rahway, NJ 07065-5024
© Disney
Visit DisneyJunior.com All Rights Reserved.
Jewelry Box
Model MM-122
Important Message to Consumers
Thank you for purchasing one of Disney top-quality electronic products. We would appreciate it if you take a few moments
to read through these instructions. This will help you understand the safe and proper way to use this product, and to help
give it the long-lasting life that Disney products are designed for.
Keep these instructions for future reference as they contain important information.
Printed in China
MODEL: MM-122
INSTRUCTION MANUAL
SIZE: 357W x 201Hmm
DATE: Jul 2, 2013
MATERIAL:100gsm White paper
PRINTING PURPLE (PMS 265C), 1C+1C
MM122-062513-A