Yamaha ATS-2020 Owner's Manual

Yamaha ATS-2020 Owner's Manual
Add to My manuals

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Yamaha ATS-2020 Owner's Manual | Manualzz

Front Surround System

(ATS-CU2020+NS-WSW41)

Owner’s Manual

U

Contents

Supplied items ...................................................................... 2

Features ................................................................................. 3

Frequently asked questions................................................. 3

Part names and functions (sound bar/subwoofer) ............ 4

Installation............................................................................. 5

Connections........................................................................... 6

Operations ............................................................................. 8

Listening to the sound from a Bluetooth device.............. 10

Settings ................................................................................ 12

Programming the sound bar with the TV’s remote control

(TV’s remote control learning function)..................................................... 12

Sending the TV’s remote signal through the sound bar

(TV Remote Repeater function)......................................................................... 14

Setting the auto power standby function ................................................ 14

Initializing the sound bar ................................................................................ 14

Troubleshooting ................................................................. 15

Specifications ...................................................................... 20

About this manual

NOTE

This indicates precautions for use of the product and its feature limitations.

HINT

This indicates supplementary explanations for better use.

i En

CAUTION

RISK OF

ELECTRIC

SHOCK DO

NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

CAN ICES-3 (B)/NMB-3 (B)

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/ accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries

Association’s Consumer Electronics

Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY

THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

4 Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

5 Relocate either this product or the device that is being affected by the interference.

6 Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line filter/s.

7 In the case of radio or TV interference, relocate/ reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

8 If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America A/V Division 6600

Orangethorpe Ave., Buena Park, CA 90620.

9 The above statements apply ONLY to those products distributed by Yamaha Corporation of

America or its subsidiaries.

• This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.

• Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation.

See the “Troubleshooting” section at the end of this manual if interference to radio reception is suspected.

FCC WARNING

Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

− Reorient or relocate the receiving antenna.

− Increase the separation between the equipment and receiver.

− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

− Consult the dealer or an experienced radio/TV technician for help.

This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).

But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

• To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.

Sound bar: Top: 10 cm (4 in), Rear: 10 cm (4 in),

Sides: 10 cm (4 in)

Subwoofer: Top: 20 cm (8 in), Rear: 20 cm (8 in),

Sides: 20 cm (8 in)

• Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

• Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

• Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

− Other components, as they may cause damage and/or discoloration on the surface of this unit.

− Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

− Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

• Do not cover this unit with a newspaper, tablecloth, curtain, etc., in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

• Do not plug in this unit to a wall outlet until all connections are complete.

• Do not operate this unit upside-down. It may overheat, possibly causing damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

• Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

• To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

• Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the “Troubleshooting” section on

common operating errors before concluding that this unit is faulty.

• Before moving this unit, press to set this unit in standby mode, and disconnect the power supply cable from the wall outlet.

• Condensation will form when the surrounding temperature changes suddenly. Disconnect the power supply cable from the outlet, then leave the unit alone.

• Install this unit near the wall outlet and where the

AC power plug can be reached easily.

• Secure placement or installation is the owner’s responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of speakers.

• Do not put a hand or foreign object into the port on the subwoofer.

• When moving the subwoofer, do not hold the port, as it may cause personal injury and/or damage to this unit.

• Do not place a fragile object near the port of the subwoofer. If the object falls as a result of the air pressure, it may cause personal injury and/or damage to the subwoofer and the object.

• Keep the product out of reach of children to avoid them swallowing small parts.

Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following places:

− places of high humidity, such as near a bath

− places of high temperatures, such as near a heater or a stove

− places of extremely low temperatures

− dusty places

• Do not expose the remote control sensor of this unit to direct sunlight or lighting such as inverted fluorescent lamps.

• If the batteries grow old, the effective operation range of the remote control decreases considerably. If this happens, replace the batteries with two new ones as soon as possible.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

• Exhausted batteries may leak. If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

• Do not carry batteries in a pocket or purse with metal objects like coins, etc.

• Do not throw away batteries with general house waste. Dispose of them correctly in accordance with your local regulations.

• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor immediately.

• When not planning to use the remote control for long periods of time, remove the batteries from the remote control.

• Do not charge or disassemble the supplied batteries.

• The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by . In this state, this unit is designed to consume a very small quantity of power.

(Power key)

Turns on the power of this unit or sets it to the standby mode.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside medical facilities.

The name plate is located on the bottom of the unit.

En 1

Supplied items

Make sure you have received all of the following items.

Sound bar (ATS-CU2020)

How to use the remote control

Preparing the remote control

Peel off the protection sheet before use.

Wireless subwoofer

(NS-WSW41)

Optical cable (1.5 m [4.9 ft])

Remote control Battery x 2

(AAA, R03, UM4)

RCA stereo cable (1.5 m [4.9 ft])

Operating range of the remote control

Remain within the operating range shown below.

Remote control sensor

Within 6 m

(20 ft)

Mounting template

* Using when attaching the sound bar to a wall

2 En

Stand x 2

(For sound bar)

Screw x 2

(For attaching the stand)

Owner’s Manual

(This manual)

Quick Start

Guide

Features

Enjoy powerful and realistic sound from the front surround system consisting of the sound bar and wireless subwoofer, and easy installation and connection to TVs and other devices.

• AIR SURROUND XTREME

Enjoy 7.1 channel surround sound, which creates a wide and deep soundstage, as if speakers are set, not only on the front, but also on the left and right, and behind

the listener (p.9).

• Advanced Bass Extension Processing

Equipped with Yamaha’s original bass boost technology, this system reproduces

more powerful sound from the dedicated subwoofer (p.9).

Bluetooth® connection

Content on a

Bluetooth compatible smartphone, tablet, or computer can be played

back easily (p.10).

You can enjoy deep and fresh sound as close to the original by the Compressed

Music Enhancer. The sound bar is also compliant with the aptX codec, which enables you to enjoy better sound from your smartphone.

• HOME THEATER CONTROLLER

You can operate the sound bar easily by installing the dedicated controlling application “HOME THEATER CONTROLLER.”

• TV’s remote control learning function

Operate the sound bar with the TV’s remote control (p.12).

• TV Remote Repeater function

Enables the TV’s remote signal to pass through the sound bar. If the installed sound bar blocks the TV’s remote sensor, the TV’s remote will not work. This

function provides a convenient solution (p.14).

• Clear voice

Makes voice sound (such as dialogues and narrations) clear (p.9).

• UniVolume

Maintains consistent sound volume when inputs or sound sources switch (p.9).

Frequently asked questions

The following section covers popular functions and frequently asked questions about the sound bar.

Q1

A1

Q2

A2

Q3

A3

Can I operate the sound bar using the remote control of the TV?

Switching between the remote controls of the TV and sound bar is inconvenient.

Yes. You can control the sound bar using your TV’s remote control by the

“TV’s remote control learning” function (p.12).

This function is available only for the IR (infrared) remote control. Check your

TV’s remote control type.

The TV’s remote control does not work after the sound bar is installed in front of the TV.

If your TV’s remote control uses IR (infrared) signals, set the “TV Remote

Repeater” function to transmit the TV’s remote control signals from the sound

bar (p.14).

If your TV’s remote control uses radio waves, increase the distance between the TV and sound bar.

Can I make voice sound more clearly?

Yes. Dialogue in movies, TV news or sports programs, etc., can be made

clearer using the “clear voice” function (p.9).

En 3

Part names and functions (sound bar/subwoofer)

Sound bar (front panel) Sound bar (rear panel)

4 En

A Indicators

Indicate the status of the sound bar. The indicators will dim automatically if no

operations are performed for 5 seconds. Refer to “Operations” (p.8 to 9) and

“Wireless connection with the subwoofer” (p.7) for the main functions of the

indicators.

B Remote control sensor

Receives infrared signals from the remote control of the sound bar (p.2).

C TV’s remote control sensor

Receives infrared signals from the TV’s remote control when the TV Remote

Repeater function is enabled (p.14).

D INPUT key

Selects an input source to be played back (p.8).

E MUTE key

Mutes the audio output. Press the key again to unmute (p.9).

F VOLUME (+/–) keys

Adjust the volume (p.8).

G (power) key

Turns on or off (standby) the sound bar (p.9).

HINT

• The sound bar may automatically turn off when the auto power standby function is enabled (p.14).

H Speakers

A TV input jack

For connecting to a TV with an optical cable (p.6).

B BD/DVD input jack

For connecting to a playback device, such as a Blu-ray Disc (BD) player, with a

coaxial digital cable (p.6).

C ANALOG input jacks

For connecting an external device with an RCA stereo cable (p.7).

D IR flasher for TV Remote Repeater

Transmits TV’s remote control signals received at the TV’s remote control sensor to

the TV (p.14).

Subwoofer (rear panel)

A STATUS indicator

Indicates the status of the subwoofer

(p.9).

B SUBWOOFER PAIRING button

For setting wireless connection between the sound bar and

subwoofer (p.19).

C Port

Installation

Place the sound bar on a flat surface such as on top of a

TV cabinet.

Place the subwoofer to the outside of the sound bar.

To avoid echoes from the wall, face the front side of the subwoofer slightly inward.

HINT

• If it is difficult to operate the TV, use the TV Remote Repeater

function (p.14) to transmit the TV’s remote control signal via sound

bar.

• When placing the sound bar across the bases of the TV, or when changing the height of the sound bar, attach the supplied stands with the stand attachment screws.

How to install on the wall

1 Attach the mounting template on a wall and mark for the screw holes.

Tapes or thumbtacks

Mounting template (supplied)

Screw holes

2 Remove the mounting template from the wall, then install commercially available screws (as illustrated below) at the points marked on the wall.

Attaching the sound bar to a wall

7 to 8.5 mm

(1/4" to 5/16")

3 to 4 mm (1/8" to 3/16")

3 Hang the sound bar on the screws.

4 mm (#8)

20 mm (3/4") or more

Cautions

• Do not stack the sound bar/subwoofer and a BD player or other device directly on each other. Doing so may cause a malfunction due to vibrations.

• Do not hold the speaker portion (fabric part) on the front of the subwoofer when moving it.

• The sound bar contains non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the sound bar.

• Depending on your installation environment, it may be better to connect the sound bar and external devices (such as a TV) before installing the sound bar.

• Do not place the sound bar within 50 mm (2") of the TV.

• The subwoofer and sound bar communicate wirelessly. Do not place objects that block wireless signals, such as metallic furniture and devices, between the subwoofer and sound bar as the wireless communication may be adversely affected.

• If the subwoofer is covered with a cloth or other object, the sound volume is reduced. Install the subwoofer so that it is not hidden behind a thick curtain, etc.

Mounting holes on rear of sound bar

Cautions

• When installing the sound bar on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the sound bar to fall, resulting in personal injury.

• Do not attach the sound bar to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the sound bar to fall.

• Make sure you use commercially available screws that can support the weight of the installation (specified in Step 2 on the right). Using clamps other than specified screws, such as short screws, nails, and two-sided tape, may cause the sound bar to fall.

Cautions

• Fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the sound bar may fall.

• Check that the sound bar is fixed securely after the installation.

Yamaha will bear no responsibility for any accidents caused by improper installations.

En 5

6 En

Connections

Connect to a TV (or other peripheral device).

Cautions

• Make sure that the power cables of the sound bar and subwoofer are not connected to AC wall outlets when you start making connections.

• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or terminal.

1

Connect the TV and sound bar with the optical cable (supplied).

Remove the cap of the optical cable and check the direction of the plug.

Sound bar (rear)

Optical cable

2

Connect the power cables of the sound bar and subwoofer to AC wall outlets.

3

Set the TV as follows.

• Set the TV volume to minimum.

• Disable the TV built-in speaker output (if available).

HINT

• If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the headphone jack on the TV. For details, refer to the manuals of the TV.

• The TV and BD/DVD input jacks support the following audio signals.

− PCM (2 channel)

− Dolby Digital (up to 5.1 channel)

− DTS Digital Surround (up to 5.1 channel)

TV

Coaxial digital cable

(commercially available)

OPTICAL OUTPUT

Power cable

HDMI cable (etc.)

Playback device (such as a BD player)

Set top box

Coaxial digital audio output

(orange)

Subwoofer (rear)

To AC wall outlet

Power cable

To AC wall outlet

HINT

If your playback device has a coaxial digital audio output, you can connect it to the BD/

DVD input of the sound bar with a coaxial digital cable (commercially available).

Analog connection of an external device (game console)

You can connect an external device, such as a game console or TV that does not have an optical output, to the ANALOG input jacks of the sound bar.

Wireless connection with the subwoofer

When the power cables of the sound bar and subwoofer are connected to AC wall

outlets (p.6) and the sound bar is turned on, the sound bar and subwoofer are

connected automatically. When the connection is complete, the SUBWOOFER indicator on the sound bar lights up and the sound bar is ready for playback.

Subwoofer indicator: Lights up

HINT

• When the sound bar is turned on for the first time, if the SUBWOOFER indicator on the sound bar does not

light up, see “Pairing the sound bar and subwoofer manually” (p.19) and connect the sound bar and

subwoofer manually.

• Once connected, the sound bar operates with the same subwoofer from the next time it is turned on.

RCA stereo cable (supplied) (etc.)

NOTE

• Make sure the left (L) and right (R) channels are connected correctly.

• Select the ANALOG key on the remote control for the input source.

Game console (etc.)

En 7

8 En

Operations

Indicators

The indicators on the front panel flash or light up, to indicate the operation and setting status.

In this manual, illustrations of the nine in-line indicators are used for explanation.

: Off

: Lights up

: Flashes

(Example: When the STATUS indicator flashes and the TV indicator lights up)

Input keys

1

Select an input source to be played back.

TV ....................TV audio

BD/DVD ...........Audio from a device connected to the BD/DVD input jack

ANALOG .........Audio from a device connected to the ANALOG input jack

BLUETOOTH...Audio from a

Bluetooth connected device

The indicator for the selected input source lights up.

(Example: when TV is selected)

HINT

• To play audio of the playback device connected to the TV or to watch videos of the playback device, set the TV’s input source to the playback device.

• For details on

Bluetooth connection, refer to “Listening to the sound from a Bluetooth device” (p.10).

SUBWOOFER keys (+/–)

Adjust the volume of the subwoofer.

Volume down (–) Volume up (+)

VOLUME keys (+/–)

Adjust the volume of the sound bar.

2

Volume down (–) Volume up (+)

LEARN key

★

Sets the sound bar to the TV’s remote control

learning mode (p.12).

★: Keys that require pressing for more than 3 seconds

BLUETOOTH STANDBY, SUBWOOFER PAIRING,

AUDIO DELAY, LEARN, REPEATER

Remote control signal transmitter

Transmits infrared signals.

★

REPEATER key

★

Enables/disables the TV Remote Repeater

function (p.14).

3

★

★

(power) key

Turns on or off (standby) the sound bar.

The STATUS indicator on the sound bar

Green (turned on)

Red (

Bluetooth standby) (p.11)

Off (turned off)

The STATUS indicator on the subwoofer

Green (turned on)

Red (turned off)

BLUETOOTH STANDBY key

★

Enables/disables the Bluetooth standby mode

(p.11).

SUBWOOFER PAIRING key

★

Performs pairing between the sound bar and

subwoofer (p.19).

4

SURROUND and STEREO keys

5

Switch between surround and stereo

(2 channel) playback. When surround playback is selected, you can enjoy a realistic sound effect using Yamaha’s exclusive AIR SURROUND

XTREME.

SURROUND Lights up (surround playback)

STEREO Off (stereo playback)

HINT

• When 2 channel stereo signals are played in surround, the PLII indicator lights up.

Lights up (Dolby Pro Logic II)

CLEAR VOICE key

Enables/disables the clear voice function.

When this function is enabled, you can enjoy clear voice sounds while watching movies, TV dramas, news programs or sports programs.

Flash 3 times (enabled), flash once (disabled)

UNIVOLUME key

Enables/disables the UniVolume function.

When this function is enabled, consistent volume is maintained when inputs or sound sources switch.

Flash 3 times (enabled), flash once (disabled)

HINT

• The UniVolume function is automatically disabled when

BLUETOOTH is selected as the input source.

AUDIO DELAY key

★

Adjusts the audio delay to synchronize the sound with the video when the video image on the TV may seem delayed with respect to the sound.

Follow the procedure below to adjust the audio delay.

1 Hold down the AUDIO DELAY key for more than 3 seconds.

The left most indicator flashes.

2 Press the SUBWOOFER (+/–) key to adjust the audio delay.

Pressing the SUBWOOFER (+) key delays the audio output timing.

(–) (+)

3 To finish the adjustment, press the AUDIO

DELAY key.

HINT

• The adjustment will be finished automatically if no operations are performed for 20 seconds.

6

BASS EXTENSION key

Enables/disables the bass extension function.

When this function is enabled, you can enjoy powerful sound during surround playback through

Yamaha’s exclusive bass boost technology.

Flash 3 times (enabled), flash once (disabled)

MUTE key

Mutes the audio output. Press the key again to unmute.

7

Flash (on mute)

Decoder indication

The sound bar supports the following audio signals. You can check the type of the input audio signal by the color of the indicator.

Green (Dolby Digital), Red (DTS Digital Surround)

Off (PCM)

En 9

10 En

Listening to the sound from a

Bluetooth device

You can play back wirelessly from

Bluetooth devices, such as smartphones or digital music players.

See also the operating manual of the

Bluetooth device for more details.

Bluetooth devices

Pairing a

Bluetooth device with the sound bar

When connecting to a

Bluetooth device for the first time, “pairing” between the device and sound bar is required. “Pairing” is necessary for each

Bluetooth device you use.

Once “pairing” with a device is completed, subsequent connection with that device will not require “pairing.”

1

Press the BLUETOOTH key on the sound bar’s remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

Lights up

2

Turn on the Bluetooth function of the device to be paired, and perform pairing.

The operation varies depending on the device. Refer to the operation manual of the device.

3

Select “ATS-2020 Yamaha” in the Bluetooth device list on the device.

If a passkey (PIN) is required, enter the number “0000.”

Perform the following steps to use a

Bluetooth device with the sound bar.

For the first

Bluetooth connection

For subsequent

Bluetooth connection

Pairing a

Bluetooth device with the sound bar

Playing back audio from a

Bluetooth device on the sound bar

When pairing is completed, or a completion message appears on the device.

NOTE

• Perform pairing with the Bluetooth device and sound bar within 10 meters (33 ft) of each other.

• Up to eight Bluetooth devices can be paired with the sound bar. If a ninth device is paired, the oldest pairing information is deleted.

• If pairing information for a device is deleted, to use that device again, pairing of the device is required again.

• If a

Bluetooth device is already connected to the sound bar, terminate that Bluetooth connection (p.11),

then perform pairing with the new device.

• Refer to “ Bluetooth” (p.18) in “Troubleshooting” if pairing cannot be achieved.

Playing back audio from a

Bluetooth device on the sound bar

1

With the sound bar turned on, press the BLUETOOTH key on the sound bar’s remote control to select Bluetooth as the input source.

The BLUETOOTH indicator on the front panel lights up in green.

Lights up

2

Turn on the Bluetooth function of the device.

When

Bluetooth connection is made correctly, the BLUETOOTH indicator of the sound bar flashes 3 times.

Using the

Bluetooth standby mode

The

Bluetooth standby mode allows you to turn on (or off) the sound bar automatically, that interlocked by the operation of the

Bluetooth device.

1

With the sound bar turned on, hold down the BLUETOOTH STANDBY key on the sound bar’s remote control for more than 3 seconds.

Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the mode between enabled and disabled.

Flash 3 times (enabled), flash once (disabled)

When the Bluetooth standby mode is enabled and the sound bar is turned off, the

STATUS indicator lights up in red. ( Bluetooth standby)

3

Flashes 3 times

Play back a song on the device.

NOTE

• Perform

Bluetooth connection with the device and sound bar within 10 meters (33 ft) of each other.

• It may be necessary to select “ATS-2020 Yamaha” in the Bluetooth device list again, in the event that a connection problem occurs. You may have to change the output setting to output audio to the sound bar, depending on the Bluetooth device you are using.

• Adjust the volume level of the Bluetooth device as required.

• If a Bluetooth device is already connected to the sound bar, terminate that Bluetooth connection, then connect with the new device.

Terminating Bluetooth connection

Bluetooth connection is terminated in the following cases. When the sound bar is turned on and the

Bluetooth connection is terminated, the BLUETOOTH indicator flashes once.

• The Bluetooth function is turned off on the compatible device.

• The BLUETOOTH key on the sound bar’s remote control is pressed for more than 3 seconds.

• The sound bar is turned off.

Lights up (red)

Functions available on Bluetooth devices with Bluetooth standby mode enabled

Power on interlock function (when the sound bar is turned off)

When Bluetooth connection is made on the device, the sound bar will turn on and will be ready to play back sound from the device.

Power off interlock function (when the sound bar is turned on)

The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when BLUETOOTH is selected as the input source.)

Using the HOME THEATER CONTROLLER application

By installing the dedicated free application “HOME THEATER CONTROLLER” to a

Bluetooth device, such as a smartphone, you can perform various operations easily and conveniently with the Bluetooth device.

(Setting items: basic operation, sound-field, sound adjustments)

For details on “HOME THEATER CONTROLLER,” see the product information on our website.

En 11

12 En

Settings

Programming the sound bar with the TV’s remote control (TV’s remote control learning function)

Once you program the sound bar, you can control it with your TV’s remote control for functions such as turning on/off the TV and sound bar simultaneously, or volume up/ down and muting/unmuting of the sound bar.

• This function is available only when your TV’s remote control uses IR (infrared) signal.

• An RF (Radio Frequency) remote control will not work.

• If you want to use a cable or satellite set top box’s remote control to operate the sound bar, use your original TV’s IR (infrared) remote control to program the sound bar, then use the set top box’s remote control to operate.

• If by changing the volume of the sound bar the TV’s volume also changes, set the TV’s volume to minimum, or disable speaker output.

1

Turn off the TV.

2

Turn off the sound bar.

3

Hold down the LEARN key on the sound bar’s remote control for more than 3 seconds to set the sound bar to the learning mode.

When the sound bar is in the learning mode, the indicators on the front panel flash as shown below.

4-2 While pointing your TV’s remote control at the remote control sensor, hold down the mute key for more than 1 second twice or three times.

Approx. 30 cm (1 ft)

TV’s remote control

Result

Hold down

(more than 1 second)

Release

(more than 1 second)

Hold down

(more than 1 second)

Bleep/buzzer Indicators

Successfully learned

Once

Lights up

Release

(...)

Failed to learn

* Repeat from

Step 4-1.

Twice

Flash

5

Teach the sound bar the “Volume (–)” code of the TV’s remote control.

5-1 Press VOLUME (–) on the front panel of the sound bar.

NOTE

• Steps 4 to 7 require only the TV’s remote control and the keys on the front panel of the sound bar.

The remote control of the sound bar is not necessary.

• If the sound bar has already learned functions, the following indicators light up.

Mute: BD/DVD, Volume (–): ANALOG, Volume (+): BLUETOOTH, Power: SURROUND

4

Teach the sound bar the “Mute” code of the TV’s remote control.

4-1 Press MUTE on the front panel of the sound bar.

5-2 While pointing your TV’s remote control at the remote control sensor, hold down the volume (–) key for more than 1 second twice or three times.

Result Bleep/buzzer Indicators

Successfully learned

Once

Lights up

Failed to learn

* Repeat from

Step 5-1.

Twice

Flash

6

Teach the sound bar the “Volume (+)” code of the TV’s remote control.

6-1 Press VOLUME (+) on the front panel of the sound bar.

6-2 While pointing your TV’s remote control at the remote control sensor, hold down the volume (+) key for more than 1 second twice or three times.

Result Bleep/buzzer Indicators

Successfully learned

Once

Lights up

Failed to learn

* Repeat from

Step 6-1.

Twice

Flash

7

Teach the sound bar the “Power” code of the TV’s remote control.

7-1 Press (power) on the front panel of the sound bar.

Clearing all programmed functions

1

With the sound bar turned off, hold down the LEARN key on the sound bar’s remote control for more than 3 seconds (for entering the learning mode).

When the sound bar is in the learning mode, the indicators on the front panel flash as shown below.

2

Hold down INPUT on the front panel of the sound bar for more than 3 seconds.

Flashes in red (cleared)

If the clearing is completed, you will hear the bleep sound three times.

3

Press the LEARN key on the sound bar’s remote control.

7-2 While pointing your TV’s remote control at the remote control sensor, hold down the power key for more than 1 second twice or three times.

Result Bleep/buzzer Indicators

Successfully learned

Once

Lights up

Failed to learn

* Repeat from

Step 7-1.

Twice

Flash

8

To finish the learning mode, press the LEARN key on the sound bar’s remote control.

This completes the necessary settings. Now you can operate the sound bar with the TV’s remote control’s mute key, volume keys, or power key.

HINT

• The learning mode will be finished automatically if no operations are performed for 5 minutes.

• Set the TV volume to minimum. When you turn up the volume of the sound bar with the TV’s remote control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in

“Connections” (p.6) to change the TV setting.

• You can press the (power) key on the sound bar’s remote control to finish learning mode.

En 13

14 En

Sending the TV’s remote signal through the sound bar (TV Remote Repeater function)

When the TV Remote Repeater function is enabled, the sound bar relays the TV’s remote signal received by the front sensor to the rear transmitter. This function should be enabled when you place the sound bar in front of your TV and you cannot operate your TV with the TV’s remote control.

This function is available only when your TV’s remote control uses infrared signals.

IR flasher for TV Remote Repeater

TV’s remote control sensor

TV’s remote control

1

Turn on the sound bar.

2

Hold down the REPEATER key on the sound bar’s remote control for more than 3 seconds to enable/disable the TV Remote Repeater function.

Setting the auto power standby function

By enabling the auto power standby function, you can avoid forgetting to turn off the sound bar after use, or if you fall asleep while watching TV.

NOTE

• When the auto power standby function is enabled and one of the following conditions is met, the sound bar will automatically turn off.

− No operation for 8 hours

− No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source.

1

With the sound bar turned off, hold down the MUTE key on the sound bar’s remote control for more than 3 seconds to enable/disable the auto power standby function.

You can check the status of the auto power standby function with the TV indicator when turning on the sound bar.

Off (enabled), lights up (disabled)

HINT

• Initial setting varies depending on the country or region.

− U.K. and Europe models: enabled

− Other models: disabled

Flash 3 times (enabled), flash once (disabled)

This completes the necessary settings. When the TV Remote Repeater function is enabled, you can operate your TV from the TV’s remote control via the sound bar.

HINT

• The TV Remote Repeater function is disabled by default.

• If the power cable of the sound bar is connected to an AC wall outlet and when the TV Remote

Repeater function is enabled, the function is usable even when the sound bar is turned off.

• If you have made the sound bar learn the volume (+) operation (p.13), the volume of the TV may be

turned up when you turn up the volume of the sound bar with the TV’s remote control. In this case,

follow Step 3 in “Connections” (p.6) to change the TV setting.

• You can check the status of the TV Remote Repeater function by the SURROUND indicator when turning on the sound bar.

Initializing the sound bar

Follow the procedure below to initialize the sound bar.

1

Turn off the sound bar.

2

Hold down (power) on the front panel of the sound bar for more than 3 seconds.

Off (enabled), lights up (disabled)

Flash (initialized)

Troubleshooting

Refer to the table below when the sound bar does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the sound bar, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.

First, check the following:

A The power cables of the sound bar, subwoofer, TV and playback devices (such as BD players) are connected to AC wall outlets securely.

B The sound bar, TV and playback devices (such as BD players) are turned on.

C The connectors of each cable are securely inserted in to jacks on each device.

Power and system

Problem

The power turns off suddenly.

The power cannot be turned on.

Cause

The auto power standby function worked.

When the auto power standby function is enabled and one of the following conditions is met, the sound bar will automatically turn off.

- No operation for 8 hours

- No audio input and no operations for 20 minutes when

BLUETOOTH is selected as the input source.

The protection circuitry has been activated. (The STATUS indicator on the front panel of the sound bar flashes.)

Remedy

Turn on the sound bar again. To stop the sound bar from turning off automatically, disable the auto power

standby function (p.14).

After confirming that all connections are made properly, turn on the sound bar again. If the power still turns off suddenly or cannot be turned on, unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.

Disable the

Bluetooth standby mode

(p.11).

Bluetooth connection is terminated on a Bluetooth device when the Bluetooth standby mode is enabled.

The protection circuitry has been activated three times consecutively. (If you try to turn on the power in this condition, the

STATUS indicator on the front panel of the sound bar flashes.)

To protect the product, the power cannot be turned on. Unplug the power cable from the AC wall outlet and contact the nearest authorized

Yamaha dealer or service center.

The sound bar is not responding correctly.

The sound bar operates by itself.

TV’s 3D glasses do not work.

The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage.

Another Bluetooth device is being operated nearby.

Hold down (power) on the front panel of the sound bar for more than

10 seconds to reboot it. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.)

Terminate Bluetooth connection of the

sound bar (p.11).

The sound bar is blocking the 3D glasses transmitter of your TV.

Check the position of the 3D glasses transmitter of your TV and adjust the position of the sound bar. Remove the stands of the sound bar if they are

attached (p.5).

Audio

Problem

No sound.

Cause

Another input source is selected.

The mute function is activated.

The volume is too low.

The power cables of the sound bar and subwoofer are not connected properly.

Remedy

Select an appropriate input source

(p.8).

Cancel the mute function (p.9).

Turn up the volume (p.8).

Make sure that power cables of the sound bar and subwoofer are connected to AC wall outlets securely

(p.6).

En 15

16 En

No sound is coming from the subwoofer. (The

SUBWOOFER indicator on the front panel of the sound bar is flashing.)

The sound from the subwoofer is interrupted. (The

SUBWOOFER indicator on the sound bar flashes when the sound is interrupted.)

The subwoofer is not connected to an AC wall outlet. (The

STATUS indicator on the subwoofer is not lit.)

The sound bar and subwoofer are not connected due to a bad wireless communication status.

(The STATUS indicator on the subwoofer continues to be lit in red or flash in green.)

The sound bar and subwoofer are not paired. (The STATUS indicator on the subwoofer is flashing or lit in red.)

The protection circuitry in the subwoofer has been activated.

(The STATUS indicator on the subwoofer is lit in orange.)

The connection between the sound bar and subwoofer is interrupted due to a bad wireless communication status. (The

STATUS indicator on the subwoofer flashes in green when the sound is interrupted.)

Plug in the power cable of the subwoofer to an AC wall outlet.

Move the subwoofer closer to the sound bar. If the situation does not improve, move the subwoofer to a location with better communication.

If the communication between the sound bar and subwoofer is obstructed by a metallic object or another object, change the position of the sound bar and subwoofer or change the installation location of the subwoofer.

If there is a device (microwave oven, wireless LAN, etc.) that emits radio frequency signals, move the sound bar and subwoofer away from the device.

Perform the pairing between the sound

bar and subwoofer (p.19).

If the SUBWOOFER indicator on the sound bar still does not light up in green after the pairing is performed, a malfunction might have occurred.

Unplug the power cables from the AC wall outlets and contact the nearest authorized Yamaha dealer or service center.

To protect the product, the power of the subwoofer cannot be turned on.

Unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.

Move the subwoofer closer to the sound bar. If the situation does not improve, move the subwoofer to a location with better communication.

If the communication between the sound bar and subwoofer is obstructed by a metallic object or another object, change the position of the sound bar and subwoofer or change the installation location of the subwoofer.

If there is a device (microwave oven, wireless LAN, etc.) that emits radio frequency signals, move the sound bar and subwoofer away from the device.

No sound is coming from the subwoofer or the sound is small.

(The

SUBWOOFER indicator on the sound bar is lit.)

The volume decreases when the sound bar is turned on.

No surround effect.

Noise is heard.

The volume is too low.

The front side of the subwoofer is blocked.

The playback source does not contain low-frequency signals.

The protection circuitry in the subwoofer has been activated.

(The STATUS indicator on the subwoofer is lit in orange.)

Turn up the volume of the subwoofer

(p.8).

Clear the area around the front side and the port of the subwoofer.

Play back a sound source containing low-frequency signals, and confirm that the sound is output from the subwoofer.

To protect the product, the power of the subwoofer cannot be turned on.

Unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center.

If necessary, turn up the volume (p.8).

The automatic volume adjustment function worked. To prevent excessive loudness, the sound bar automatically controls its volume within a certain level when the sound bar is turned on.

Stereo playback is selected.

The volume is too low.

The TV or playback device is set to output 2 channel audio (such as PCM) only.

The audio is output from the TV built-in speakers.

The playback source does not contain surround audio.

The sound bar is too close to another digital or high-frequency device.

Select surround playback (p.9).

Turn up the volume (p.8).

Change the digital audio output setting on the TV or playback device to Dolby

Digital or BitStream.

Set the TV volume to minimum (p.6).

Play back a source that contains audio recorded in surround.

Move those devices away from the sound bar.

Remote control

Problem

The sound bar cannot be controlled using the remote control.

The TV cannot be controlled using the TV’s remote control.

The TV cannot be controlled by using the TV

Remote Repeater function.

Cause

The sound bar is out of the operating range.

The batteries are weak.

The remote control sensor of the sound bar is exposed to direct sunlight or strong lighting.

The remote control sensor of the

TV is blocked by the sound bar.

Remedy

Use the remote control within the

operating range (p.2).

Replace with new batteries (p.2).

Adjust the lighting angle, or reposition the sound bar.

The TV Remote Repeater function is disabled.

The TV’s remote control does not use infrared signals. (Some remote controls may not work even if it uses infrared signals.)

The sound bar and TV are too close or too far from one another.

Use the TV Remote Repeater function

(p.14) or remove the stands of the

sound bar if they are attached so that the remote control sensor of the TV is

not blocked (p.5).

Enable the TV Remote Repeater

function (p.14).

The TV Remote Repeater function cannot be used in this case. Adjust the position of the sound bar so that the remote control sensor of the TV is not blocked by the sound bar and use the

TV’s remote control to operate the TV.

Move the sound bar away from the TV

more than 50 mm (2") (p.5).

If necessary, attach or remove the stands of the sound bar to adjust height for the IR flasher (for TV

Remote Repeater) of the sound bar positioning in front of the remote

control sensor of the TV (p.5).

Remove the obstacle between the sound bar and TV.

There is any obstacle (such as cables) between the sound bar and TV.

TV is not receiving the remote control signal well since the signals from the TV’s remote control and IR flasher (for TV

Remote Repeater) of the sound bar are interfering.

Disable the TV Remote Repeater

function (p.14).

The sound bar does not learn

TV’s remote control operations.

Sound is coming from the TV when the sound bar volume is turned up with the TV’s remote control.

(when TV’s remote control learning function is used)

The power of the sound bar and of the TV switch in the opposite direction. (For example, the TV is turned off if the sound bar is turned on.)

(when TV’s remote control learning function is used)

The TV’s remote control key was not held down long enough.

The TV’s remote control does not use infrared signals. (Some remote controls may not work even if it uses infrared signals.)

The position where you operated the TV’s remote control is not appropriate.

The batteries of the TV’s remote control are weak.

The remote control sensor of the sound bar is exposed to direct sunlight or strong lighting.

The transmission of the remote control signal was disturbed by the TV screen light.

Audio output is enabled on the

TV.

Hold down the key for more than 1

second twice or three times (p.12).

The TV’s remote control learning function cannot be used in this case.

Use the sound bar’s remote control to operate the sound bar.

Operate the TV’s remote control at the

appropriate position (p.12).

Replace with new batteries.

Adjust the lighting angle, or reposition the sound bar.

Turn off the TV and perform the

learning operation again (p.12).

Change the TV setting to disable the

TV speaker output. If a setting to disable the speaker output is not available on your TV, try the following methods.

- Connect headphones to the headphone jack on the TV.

- Set the TV volume to minimum.

The power of the TV was on when you performed the learning operation.

Press the power key on the TV and

(power) on the front panel of the sound bar to turn them on and then press the power key on the TV’s remote control to turn them off.

En 17

18 En

Bluetooth

Problem

Cannot make the sound bar paired with the

Bluetooth device.

Cannot make a

Bluetooth connection.

Cause

Bluetooth is not selected as the input source.

The device does not support

A2DP.

A

Bluetooth adaptor, etc., that you want to pair with the sound bar has a password other than

“0000.”

The sound bar and device are too far apart.

There is a device (microwave oven, wireless LAN, etc.) that outputs signals in the 2.4 GHz frequency band nearby.

Another Bluetooth device is connected.

Remedy

Select

Bluetooth as the input source.

Perform pairing operations with a device which supports A2DP.

Use a

Bluetooth adaptor, etc., whose password is “0000.”

Move the device closer to the sound bar.

Move the sound bar away from the device that is emitting radio frequency signals.

Another Bluetooth device is connected.

More than nine devices are paired and the oldest pairing information is deleted.

Terminate current Bluetooth connection, and perform pairing with the new device.

The sound bar cannot make multiple

Bluetooth connections. Terminate current Bluetooth connection, and make connection for the desired device.

Perform pairing again. The sound bar can retain pairing information for up to eight devices. When pairing a ninth device, the oldest pairing information will be deleted.

No sound is produced or the sound is interrupted during playback.

The

Bluetooth connection of the sound bar with the device is disconnected.

Bluetooth is not selected as the input source.

The sound bar and device are too far apart.

There is a device (microwave oven, wireless LAN, etc.) that outputs signals in the 2.4 GHz frequency band nearby.

The device is not set to send

Bluetooth audio signals to the sound bar.

Playback on the device has not been performed.

The device’s volume is set to minimum.

Perform

Bluetooth connection

operations again (p.10).

Select Bluetooth as the input source.

Move the device closer to the sound bar.

Move the sound bar and subwoofer away from the device that is emitting radio frequency signals.

Change the audio output setting and connection setting on the device.

Perform playback on the device.

Turn up the volume level.

Pairing the sound bar and subwoofer manually

1

With the sound bar turned on, hold down the SUBWOOFER PAIRING key on the sound bar’s remote control for more than 3 seconds.

The SUBWOOFER indicator on the front panel of the sound bar flashes rapidly.

2

Within 30 seconds, push the SUBWOOFER PAIRING button on the rear panel of the subwoofer for more than 3 seconds with a tapered object such as a hairpin.

The STATUS indicator on the rear panel of the subwoofer flashes rapidly in green.

When pairing is complete and the sound bar and subwoofer are connected, the

SUBWOOFER indicator on the front panel of the sound bar lights up.

If the SUBWOOFER indicator on the sound bar does not light up even after

performing the above operation, see “Troubleshooting” (p.15).

HINT

• “Pairing” is the operation where the sound bar and subwoofer decide the device to connect to.

En 19

20 En

Specifications

Item

Amplifier

Section

Speaker

Section

Decoder

Input Jacks

Wireless subwoofer

Bluetooth

Sound bar

(ATS-CU2020)

Subwoofer

(NS-WSW41)

Maximum Rated

Output Power

Front L/R 50 W x 2 ch Dynamic power 100 W

Type

Driver

Acoustic suspension type

(Non-magnetic shielding type)

Advanced Yamaha

Active Servo Technology

(Magnetic shielding type)

5.5 cm (2-1/8") cone x 2 16 cm (6-1/2") cone

Frequency

Response

Impedance

150 Hz to 22 kHz

Supported audio signal (TV, BD/

DVD)

6 Ω

PCM (2ch)

Dolby Digital

DTS Digital Surround

Digital (Optical) 1 (TV)

Digital (Coaxial) 1 (BD/DVD)

35 Hz to 150 Hz

5.5 Ω

--

--

--

Analog (RCA) 1 (ANALOG)

Frequency band 2.4 GHz

Transmission range

Bluetooth version

10 m ([33 ft] without interference)

Ver. 2.1+EDR

--

--

Supported protocols

Supported codecs

A2DP, SPP

SBC, aptX

--

--

Bluetooth Class 2

-Wireless output

Maximum communication distance

Supported content protection method

10 m ([33 ft] without obstructions)

SCMS-T

--

--

Power Supply

Power

Consumption

Standby Power

Consumption

Bluetooth standby power consumption

AC 120 V, 60 Hz

26 W

0.4 W

0.5 W

General

Dimensions

(W x H x D)

886 x 80 x 121 mm

(not including stands, default state)

(34-7/8" x 3-1/8" x 4-3/4")

886 x 98 x 121 mm

(including stands)

(34-7/8" x 3-7/8" x 4-3/4")

Thickness excluding speaker protrusions

(thinnest part)

Weight

78 mm (3-1/8")

2.8 kg (6.1 lbs)

* Specifications are subject to change without notice.

45 W

1.4 W

--

290 x 292 x 316 mm

(11-3/8" x 11-1/2" x

12-1/2")

--

8.1 kg (17.9 lbs)

This system is equipped with Yamaha’s AIR SURROUND XTREME virtual sound technology that achieves superior positional, high-grade 7.1 channel surround sound using the sound bar and subwoofer.

The subwoofer of this system employs Yamaha’s exclusive bass control technology “Advanced Yamaha

Active Servo Technology II” and has achieved high-quality low-frequency sound playback.

“UniVolume” is a trademark of Yamaha Corporation.

Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

© 2013 CSR plc and its group companies.

The aptX

®

mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.

“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the Blu-ray Disc Association.

Bluetooth

Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a license.

Handling

Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment. While Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band, such influence may reduce the speed or distance of communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communications is possible differs according to the distance between the communicating devices, the presence of obstacles, radio wave conditions and type of equipment.

• Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.

En 21

© 2014 Yamaha Corporation Printed in Indonesia ZM98650

advertisement

Related manuals