Red dot sights 2012
forcement
Red dot sights
2012
Aimpoint Inc.
14103 Mariah Court
Chantilly, VA 20151, USA
Call Toll-free 1-877-246-7646
Phone +1 (703) 263-9795 • Fax +1 (703) 263-9463
E-mail: [email protected] • www.aimpoint.com
Military & Law Enforcement Military & Law Enforcement Military & Law Enforcement Military & Law Enforcement Military & Law Enforcement Military & Law Enforcement Mil
Graphic Design: STICKY FINGERS® Malmö, SWEDEN • Photographers: Robbie Barkmann, Reed Brown, L.F. Dunal, Foxwood Photography, Robert Glover, Cam Hopkins,
Mitch Kezar, Henry Kokko, Alex Landeen, Berto Leichty, Darren McBurnett, Ichiro Nagata, Magnus Nyman, Cliff Patrick, Tactical Night Vision/Kelly Lasky Photography,
Y. Sued, J.C. Tolphin and Jonas Wall • Printing House: Exaktaprinting, Malmö, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB
All rights reserved. © 2012 Aimpoint AB. Art. No. M01237
TABLE OF CONTENTS
4 The President´s Letter 6 Why an Aimpoint Red Dot Sight?
7 Developments & Quality
10 Micro T-1 / H-1 14 PRO 16 CompM4 / M4s
18 CompM3 / ML3
20 CompM2 / ML2
24 3XMag
26 CEU
28 MPS3
30 LPI 34 Mounting Solutions
36 Accessories
37 Warranty & Customer Service
38 System-of-Systems
40 Getting the Most from Your Aimpoint Sight
42 Technical Specifications
The President´s Letter
To Our Valued
Customers and Friends:
In 1974, a small group of Swedish entrepreneurs started exploring ways to improve shooting
accuracy. Their goal was simple but ambitious; to create a sighting technology that would allow
shooters to acquire difficult targets quickly and accurately under any conditions imaginable.
Little did they know that the product their idea would eventually evolve into, the Aimpoint
electronic reflex sight, would soon revolutionize the shooting and hunting industry.
In basic terms, Aimpoint’s breakthrough technology allows a shooter to do what comes naturally – shoot while keeping both eyes open and remaining focused on their target. When a
shooter looks into an Aimpoint sight, a red dot appears in the lens. When the red dot is on
the target, you’re on target, with no centering required. It is this inherent combination of
simplicity, speed, and accuracy that makes Aimpoint sights the preferred choice for beginners
and experts alike.
The U.S. Army was the first military force to recognize the full potential of Aimpoint’s parallaxfree, red dot technology. In 1997, the Army awarded Aimpoint its first contract for the supply
of electronic sights. Since then, Aimpoint has delivered over 1,000,000 of its soldier-tested,
combat proven sights to the U.S. Military. Even following several additional rounds of rigorous
competitive testing, Aimpoint remains the only manufacturer type-classified to supply the
M68CCO to the US Military to this day.
As a result of Aimpoint’s commitment to innovation, quality, and constant improvement,
the company is recognized as the worldwide leader in electronic sighting technology. The
products you will find contained on the pages of this catalog are the result of over 38 years
of undiluted focus on our company’s core competency, and represent the finest products we
have ever offered. The Aimpoint Micro sights are the toughest and most dependable compact
sights available. The CompM4s is the latest version of the US Army’s M68CCO, and offer up
to 8 years of constant-on use from a single AA battery. And the new Aimpoint Patrol Rifle
Optic has already achieved an enormous response from US Law Enforcement.
Around the world there are well over 2,000,000 hunters, sports shooting enthusiasts, police
and military personnel who use Aimpoint sights, and we thank you for your trust and continued support. For those who have yet to use our products, be sure to give us a try and see
just how fast and accurately you can shoot without magnification.
We will be busy working on the next big advancement in optics technology, and we promise
that we will not let you down. Just wait until you see what we do next!
Sincerely
Lennart Ljungfelt
President
Military
4
Law Enforcement
Military
5
Law Enforcement
Development & Quality
Why an Aimpoint Red Dot Sight?
The Aimpoint Philosophy
Why an Aimpoint Red Dot Sight?
When the time comes to shoot, there should be absolutely
no question that you can count on your sight to perform.
We believe that a weapon sight should simplify aiming while
meeting the highest possible requirements for reliability
and ruggedness. We know that conditions in the field place
extreme demands on your equipment, so we design and
test Aimpoint products to stand up to any conditions you
are likely to encounter. We also design our products to
operate constantly for years on a single battery so your
sight will always be ready whenever you need it.
Place the dot on your target - from any angle
Why a Red Dot Sight?
To be successful, shooters must be able to aim accurately
and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the
real world, everything is in fast motion. Add rough terrain,
foul weather, poor light and high levels of stress and even
the most experienced marksman will be put to the test.
Red dot sights are superior to iron sights and magnifying
scopes in several ways. Using these other types of aiming
devices require that the shooter’s focus leaves the target.
With iron sights, shooters must align the rear and front
sights with the target. Magnified scopes slow you down.
Your field of vision is severely limited, and locating your
target through a tube with one eye closed wastes valuable
time and destroys your situational awareness.
The single red dot has been proven to be the fastest
type of reticule to place on target, and provides the greatest increase in hit probability on moving targets. Red dot
sights allow you to remain focused on the target. Shooting with both eyes open means that you remain in touch
with what is going on around you, and will never again
miss an important shot because your scope was on the
wrong magnification!
Military
6
Law Enforcement
Aimpoint sights are parallax-free, which means that the
visible dot remains parallel to the bore of your weapon
no matter what angle your eye is in relation to the sight.
This means you never have to worry about centering the
dot inside the sight. When the dot is on target, so are you.
You will be able to get on target fast, and can forget about
being challenged by bad light or moving targets.
All conditions - Anywhere
Aimpoint sights work in all light conditions from the darkness of the forest before dawn to bright mountain sunlight.
They are fully submersible so you never have to worry
about rain or immersion. Aimpoint sights are developed
and tested to be used in any weather conditions, from
the sub-zero temperatures of the Arctic to the heat and
humidity of the tropics.
On any type of firearm
Whether you have a rifle, shotgun, handgun, black powder
rifle or bow, Aimpoint has a sight for you.
Standard features on all Aimpoint sights
User friendliness
Aimpoint sights are extremely user friendly. Operated by
a mechanical switch or push-buttons, an Aimpoint sight
can be easily and quickly changed to the right setting while
simultaneously aiming through your sight. Our mechanical
switch and push buttons won’t freeze and are easy to use
whether you are wearing gloves or not.
Environmental awareness
At Aimpoint, we take great pride in making sure that neither
hazardous nor radioactive materials are used in our sights.
Quality
Aimpoint sights are manufactured in accordance with ISO
9001:2008 and meet the highest standards of quality. Each
sight is hand-built at our state of the art facilities in Sweden,
assigned an individual identification number, and subjected
to rigorous testing and numerous quality control checks
during the manufacturing process.
Aimpoint’s Advanced Circuit Efficiency Technology
We pioneered the development of the red-dot sight in
1975, so every Aimpoint sight has over 37 years of advanced
electro-optical science built in. Aimpoint’s Advanced Circuit Efficiency Technology combines our superior accuracy
and ease of use with significantly lower power usage to
maximize battery life.
ACET sights can last up to 80,000 hours (8 years on setting
7 of 10) of constant-on use from a single battery. That´s
79,000 hours more than other competitive sights at the
same setting.
Aimpoint - Global leader
Aimpoint is the recognized worldwide leader and originator
of red dot sighting technology. After 37 years of working
closely with experienced marksmen and military weapon
experts around the world, Aimpoint red dot sights remain
the number one choice for combining ruggedness, speed
and accuracy. Aimpoint sights are in service with the US
Army, the US Air Force, the US Navy, US Marine Corps,
and numerous other military forces, police agencies, and
special teams worldwide. Soldier tested & combat proven
– Don’t settle for anything less!
• Unlimited field of view
• Parallax-free and unlimited eye relief
• Unaffected by extreme weather conditions
• Extremely rugged, durable construction
• No hazardous materials
• No laser emission that could be harmful to your eyes
• Increased aiming confidence and hit probability
• Reduced training time and ammunition consumption
• Battery life measured in years
Military
7
Law Enforcement
Aimpoint®
Series
icro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1 • Micro T-1 • Micro H-1
’’
Military
8
Law Enforcement
The only compact sights tough enough
to carry the Aimpoint brand.
’’
Military
9
Law Enforcement
’’
No matter what your mission, the size and weight of your equipment is
a critical factor. With the Aimpoint Micro T-1, Aimpoint has introduced
an aiming system that provides the performance of our full-sized sights
in the smallest package possible.
In my opinion, Aimpoint is currently making the finest red
dot reflex style sights the world has ever seen. Simply put,
there is Aimpoint and then there is everything else.
Larry Vickers
Vickers Tactical, Inc./TacTV
’’
Features
• Ideal for rifles, carbines, shotguns, submachineguns handguns.
• 1X (non-magnifying) parallax free optic.
• Micro T-1 is compatible with all generations of Night Vision Devices (NVD).
• Micro H-1 is designed for daylight and
low light conditions
• Micro T-1 has 1 Off , 4 night vision
compatible with settings and 8 daylight
settings (including one extra bright ).
• Micro H-1 has 1 off and 12 daylight/low
light settings.
• Mount is keyed to the sight body to
absorb recoil.
• New ACET technology allows 50,000
hours (over 5 years) of constant operation from one battery.
• 4 MOA dot.
• Micro T-1 is submersible to 80 feet
(25 meters).
For more technical information,
please see page 42
Micro T-1
Built to offer the same battle proven ruggedness as other Aimpoint products,
the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. The Micro T-1 is ideal as a standalone sight, and
because it weighs less than 4 ounces including the integrated Picatinny mount,
it can easily be “piggybacked” on top of larger magnifying scopes. For those
applications where night vision compatibility is not required, the Micro H-1
offers additional day and low light settings.
Customize your sight
Aimpoint’s Micro sights are both rugged and versatile.
With numerous mounting options the Micro sights can be
deployed on nearly every weapon in your armory.
The Micro is rapidly becoming the tactical sight of choice
by both law enforcement and military units. Aimpoint now
offers two new spacers available for the Micro which increase the mounting options across the AR15/M4 Carbine,
HK416, and FN SCAR weapon platforms.
Micro T-1
For more information about mounting solutions see page 34
Micro spacer high
Micro spacer low
Micro LRP mount
Military
10
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
Military
11
Law Enforcement
Aimpoint®
Comp
Series
• CompM4S • CompM3 • CompML3 • CompM2 • CompML2 • PRO • CompM4 • CompM4S • CompM3 • CompML3 • CompM2 • CompML2 • PRO • CompM4 • CompM4S • CompM3 • C
’’
Military
12
Law Enforcement
The global standard for reliability and endurance.
The competition can’t even come close.
’’
Military
13
Law Enforcement
PRO
patrol rifle optic
Designed with input from a distinguished group of current
and former professionals, the Aimpoint Patrol Rifle Optic
(PRO) incorporates many never before seen features to
maximize this sight’s performance within the challenging
conditions faced by modern law enforcement.
New!
Flip covers are included to further protect the
lenses, and a transparent rear lens is utilized
allowing the user to engage a target with the
lens covers closed in an emergency situation.
A two Minute of Angle (2 MOA) red dot is utilized
to allow maximum accuracy at all distances.
Features
• Compatible with all generations of
night vision devices and may be used
with Aimpoint 3X Magnifier and CEU.
• 1x (non-magnifying) parallax free optic.
• 2 MOA dot for accurate target engagement at all distances.
• ACET Technology allows 30,000 hours
(over 3 years) of operation on one
single battery.
• In-service date and battery change
reminders make inventory tracking and
maintenance easy.
• 4 night vision compatible settings and 6
daylight settings.
• Pre-mounted with QRP2 mount for
M1913 standard Picatinny rail applications.
• Spacer for AR15/M4 carbine application.
• Threaded front lens opening allows use
of anti-reflection device (ARD).
• Submersible to 45m (150 feet).
For more technical information,
please see page 42
Patrol Rifle Optic
The front lens utilizes a unique band-pass coating, which allows the sight
to be used with all generations of night vision devices. The modular QRP2
mount includes a removable spacer that indexes the sight at the optimal height for co-witness with the standard iron sights on AR15/M16/M4
Carbine style weapons. This spacer can be removed to enable the use of
the sight on police shotguns or submachineguns. The QRP2 mount also
incorporates a torque-limiting twist knob that provides the optimal level
of pressure on the rail while eliminating the possibility of over-tightening.
Both the front and rear lenses are recessed within the sight body to provide protection against impact damage, scratches and fingerprints.
Military
14
Law Enforcement
www.aimpoint.com
’’
The PRO sight combines battle proven lineage and
world-renowned Aimpoint durability with an affordable package price. It simply doesn’t get any better.
Ben Battles
Editor On Target
Call now Toll-free 1-877-246-7646
’’
Military
15
Law Enforcement
CompM4
CompM4s
The Aimpoint CompM4s is the latest version of the U.S. Army’s M68
CCO (Close-Combat Optic), continuing a legacy that Aimpoint has
maintained since 1997. Having procured over 1,000,000 Aimpoint
sights under contract since 1997, the U.S. military continues to put
their trust in Aimpoint quality.
The CompM4 has a top-mounted battery compartment, placing the adjustment knob in the classic
position that many shooters expect on an Aimpoint
sight. The CompM4s sports a low battery compartment that offers a more streamlined profile.
CompM4
CompM4s
Features
• Compatible with every generation of Night
Vision Devices (NVD).
• 1X (non-magnifying) parallax free optic.
• Internal voltage regulator allows the CompM4
to be used with any AA size battery.
• 7 night vision compatible settings and 9 daylight settings.
• Mount base is “keyed” into the body of the
sight to absorb recoil.
• 500,000 hours of use on NVD setting.
• 2 MOA dot for accuracy at all ranges.
• Up to 80,000 hours of constant-on power
from one AA battery.
• Unequalled light transmission for enhanced
low light operation.
• Submersible to 150 feet (45 meters).
• Carry handle adaptor available for use on M16
rifles.
For more technical information,
please see page 42
CompM4 and CompM4s
Aimpoint CompM4 and CompM4s sights both include
enhanced ACET technology that provide up to 8 YEARS of
continuous use from a single AA size battery! Once turned on,
Aimpoint sights stay on – there is no automatic shut-off so
your optic is always ready whenever you need to use it. The
CompM4 and CompM4s incorporate an integrated mount
that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of
weapon systems.
Complete and ready to mount
All CompM4 sights are shipped complete with a QRP2
mount and standard AR15 spacer. These sights also
come equipped with a killFlash® anti-reflection device
and MILSPEC rubber lens covers.
Customize your sight
CompM4 and CompM4s sights can be customized according to your preferences and needs. The sight is delivered
with a standard mount and a spacer. Both the mount and
spacer can be changed to meet the demands of your specific mission and equipment. The extended spacer moves
the sight forward, creating additional room on the main
rail for a magnifier and back up iron sight (BUIS).
CompM4 or CompM4s
Standard
spacer
Forward
spacer
For more information about mounting solutions see page 34
Rubber Bikini Lens Cover
ARD killFlash® filter
Standard Spacer
QRP2 Mount
QRP2 Mount
Military
16
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
LRP Mount
TNP Mount
Military
17
Law Enforcement
CompM3
CompML3
The CompM3 is the top choice of many US Federal agencies. Why?
Premium performance features such as five years of constant-on power
from a single battery, night vision compatibility, and legendary Aimpoint
ruggedness. The CompML3 is just as tough as the CompM3, but built
primarily for use in daylight and lowlight conditions. Both the CompM3
and CompML3 will hold up under the roughest physical handling and
most severe weather conditions.
Both CompM3 and CompML3 are shipped with
a black rubber armor cover to further protect the
housing. A flat dark earth cover is available from
Aimpoint Dealers as an accessory.
Features
• 1X (non-magnifying) parallax free optic.
• CompM3 is compatible with Night
Vision Devices.
•CompML3 is designed for daylight and
low- light conditions
• ACET technology allows for 50,000
hours (over 5 years) of operation from
one battery.
• 500,000 hours of use on NVD setting.
• Available in 2 dot sizes (2 and 4 MOA).
• Submersible to 150 feet (45 meters).
• Comes with replaceable outer black
rubber cover.
• May be used with 30 mm mounts from
any manufacturer.
For more technical information,
please see page 42
CompM3
When it’s time to go, you don’t want to be playing
with buttons or worrying whether your batteries are
dead or alive. With up to five years of constant-on
power, you never have to shut a CompM3 sight off,
and you will not be constantly reloading batteries.
The CompM3 is also nearly legendary in regard to its
ability to function following disasters such as explosions, fires, being dropped, run over by vehicles, and
even burned in a helicopter crash. Never compromise on quality when it’s your life on the line.
CompML3
The CompML3 is the right choice for anyone who
wants a full featured sight, but doesn’t require
Night Vision compatibility. With all the other great
features of the CompM3, the CompML3 is a serious
alternative for use in daylight and low light applications. Just like the CompM3, the intensity of the red
dot on the CompML3 is controlled using a rotary
switch, which can be easily manipulated without
taking your eyes off the target, and even while
wearing gloves.
’’
I have been using Aimpoint sights in one form or another
since they first became available. I continue to use them
because of their history of ruggedness, reliability and extraordinary battery life. I am so confident in the battery life of
Aimpoint sights that I have two M3´s that I never switch off.
Pat Rogers
Owner, EAG Tactical
Military
18
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
’’
Military
19
Law Enforcement
CompM2
CompML2
Adopted by the US Army in 2000, the CompM2 (M68 CCO)
has long been the standard close-combat optic for the U.S. Army,
U.S. Air Force and many NATO countries. This sight has become
an immediately recognizable military icon, and has served with
distinction in every action from Somalia and Grenada, to Iraq, and
Afghanistan, and is still found in widespread service 12 years after
its introduction.
Features
• 1X (non-magnifying) parallax free optic.
• CompM2 is compatible with every generation of Night Vision Devices (NVD).
• CompML2 is designed for daylight and
lowlight conditions.
• 4 MOA dot
• CET technology allows up to 10,000
hours (over 1 year) of daytime operation
on one battery.
© DoD Photo
• 100,000 hours of use on NVD setting.
• Submersible to 75 feet (25 meters).
• Over 500,000 CompM2 (M68 CCO) in
past and present use by the U.S. Army
and U.S. Air Force.
For more technical information,
please see page 42
© DoD Photo
CompM2
Aimpoint has introduced many new and innovative
products since the widespread acceptance of the
CompM2 in the late 1990’s, but it is hard to question
success. You will still find CompM2 sights in active
service years after their introduction despite constant heavy use in combat. From the jungles to the
desert to the arctic and everywhere in between, the
Aimpoint CompM2 has earned its stripes as a true
piece of battle tested, mission critical equipment
Military
20
Law Enforcement
CompML2
For those not requiring Night vision compatibility,
the CompML2 offers additional daylight and low
light settings. Just like the CompM2, this sight is
legendary for its ability to stand up to extreme conditions, and provides over one year of continuous
on power from a single battery. Why? Because the
CompM2 and CompML2 were designed to provide
absolute reliability no matter what the conditions.
That’s also why, over twelve years later, both of
these sights remain two of our most requested
models.
www.aimpoint.com
’’
The Aimpoint CompM2 is the unquestioned standard by which all red
dot optics are measured and compared—even today. Throughout the
nearly 20 years of issuing weapons equipped with optics to our service
men and women, Aimpoint optics have proven to be the most reliable
and widely requested brand by those working to protect our way of life.
Eric Poole
Editor, Intermedia Outdoors
Call now Toll-free 1-877-246-7646
’’
Military
21
Law Enforcement
Aimpoint®
Miscellaneous
Products
• CEU • MPS3 • LPI • 3XMag • CEU • MPS3 • LPI • 3XMag • CEU • MPS3 • LPI • 3XMag • CEU • MPS3 • LPI • 3XMag • CEU • MPS3 • LPI • 3XMag • CEU • MPS3 • LPI • 3XMag •
’’
Military
22
Law Enforcement
Specialized products for serious applications.
’’
Military
23
Law Enforcement
The Aimpoint 3XMag magnifying module is a high quality European
optic that can be used with any Aimpoint sight for extended range
target identification and engagement. This high quality accessory
gives the shooter the best of both worlds: rapid CQB aiming with
an Aimpoint sight, and long range target acquisition in combination
with the magnifier. The Aimpoint TwistMount allows this transition
to occur effortlessly and in just a matter of seconds.
3XMag
The 3XMag is ideal for perimeter security and squad designated marksman missions. The versatile 3XMag can also
be used as a handheld magnifying monocular for discrete
observation and target identification.
Art. No. 11324
NSN nr 1240-01-551-5736
Features
• Ready to mount behind Aimpoint sights.
• Extremely fast on/off quick change
mounting solution.
• Mounting and dismounting the magnifier has no influence on the point of
aim of your sight. No need to re-zero
the sight after adding or removing the
magnifier.
• Internal adjustments allow centering
the magnifier to your sight.
• Rubber armor increases ruggedness.
• Drilled and tapped for use with other
accessory mounts.
• Spacer available to accommodate a
wide variety of weapons.
From CQB to semi-sniping capability and vice versa in a split second.
Technical Specifications
Optical System
Magnification Objective diameter Field of view (FOV) Exit pupil diameter Physical Specifications
2
1
CQB capability
Military
24
Law Enforcement
Place the 3XMag on the TwistMount base
4
3
Turn clockwise into its final position
Semi-sniping capability
www.aimpoint.com
Dimensions, L x W x H Weight Material housing
Environmental Specifications
Temperature range Humidity Water resistance Mechanical interface
3X
25 mm
7°
7 mm
110 mm x 44 mm x 41 mm
(4.3” x 1.7” x 1.6”)
200 g (7.1 oz) including rubber cover
Anodized aluminum, dark grey color.
Protective cover: black rubber
-45° C to + 70° C, (-50° F - +160° F)
in operation and storage
0 – 100% condensing or non-condensing
Submersible to 20 m (67 ft)
Call now Toll-free 1-877-246-7646
The recommended mount for the 3XMag is
the Aimpoint TwistMount, which allows for
quick attachment on any MIL-Std 1913 Picatinny Rail, and also indexes the magnifier for
co-witnessing with Aimpoint sight and mount
combinations.
The 3X Mag can also be attached to aftermarket flip to side mounts using the 4 drilled and
tapped screw holes located on the accessory
plate located on the bottom of the magnifier.
See page 34 for more details about the TwistMount.
Military
25
Law Enforcement
CEU
The Aimpoint CEU (Concealed Engagement Unit) is the latest component
incorporated into Aimpoint’s unique System-of-Systems approach. It gives
the operator the ability to observe and/or engage a threat from a concealed
or covered position. The Aimpoint CEU easily rotates from side to side, so an
operator can safely look around either right or left-hand corners, over barricades and under vehicles. It can also be quickly removed in order to rapidly
return to direct engagement.
Art. No. 12156
Export license/End-user certificate is required for this product.
Image courtesy of Tactical Night Vision Company
Features
• Designed to be compatible with all
Aimpoint sights.
• Constructed to provide a ‘true image’
NOT a reversed mirror reflection.
• Allows aiming over walls, under cars,
and around corners without direct
exposure to the threat.
• Does not affect the sight’s point of aim.
• Quick detach TwistMount can also be
used with Aimpoint 3X Magnifier, and
Night Vision Device rings.
• Small and lightweight.
• Easily removed from the weapon if
necessary.
• No need to equip a team member with
a specialized weapon or electronic
viewing device.
• Rotates a full 260°.
• Designed to withstand extreme conditions.
Aimpoint CEU
The Aimpoint CEU turns an operator’s standard weapon into a scouting tool that allows
for observation over walls, under vehicles or around corners without direct exposure to
the threat. The simple and rugged design of the CEU means that it is no longer necessary
to rely on a single team member with a specialized weapon or an expensive and fragile
electronic device. Since the Aimpoint CEU does not affect the sight´s point of aim, it can
easily be passed from one member of a unit to another as long as both weapons are outfitted with an Aimpoint TwistMount. Engaging targets while using the CEU is simple and
extremely effective. There is simply no other device on the market using this same proven
technology. The Aimpoint CEU is a patented system developed by DSTO in Australia under
the name “Off-Axis Viewing Device” (OAVD). Aimpoint has world-wide exclusive rights for
production and sales of this system outside of Australia
Technical Specifications
Optical System
Operating Principle:
Optical Magnification:
Clear Aperture:
Optical Coating:
Optical Signature:
Dual mirror reflective device for true target view.
1x, unlimited eye relief
25 mm diameter “see through”
Anti-reflex coated optical elements and high-reflection mirrors for maximum light transmission, NVD compatible
The unit does not influence the forward
optical signature
Mechanical Interface
The recommended mount for the CEU is the Aimpoint Twist
Mount, which allows for quick attachment and detachment.
The Aimpoint TwistMount fits any MIL-Std 1913 Picatinny Rail.
Military
26
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
The Aimpoint CEU rotates a full 260° allowing the operator
to safely look around either right or left-hand corners, up
staircases or down tunnels from almost any angle.
Featured on pictures above : CEU with Aimpoint® TwistMount™ (Base & high Top ring).
See page 34 for more details about the TwistMount.
Military
27
Law Enforcement
MPS3
The Aimpoint MPS3 is a passive electronic reflex collimator sight designed
for use on medium or heavy weapons. Developed primarily for mounted
operations, the MPS3 is ideal for use on land vehicles, helicopters or fastattack boats and ships. Its simplicity of use is based on the “One Function
Principle” allowing the user to concentrate on the target, aim the weapon
with a single red-dot, and operate the sight controls just like when using a
standard M68CCO.
Export license/End-user certificate is required for this product.
Features
• 1X (non-magnifying) parallax free optic.
•Compatible with every generation of NVD.
•ACET technology combined with a AA
battery gives 80,000 hours (over 8
years) of typical usage on one battery.
•500,000 hours of use on NVD setting.
•Designed to stand up to recoil of heavy
weapons.
•One Function Principle for simplicity of
use in field.
•Manually adjustable reticule brightness.
• Accessory rails on sight allow for mounting IR or visible lasers.
•Multi Purpose Sight for use on land, air
and at sea.
• 7 night vision compatible settings, 9 day
settings of which one extra bright.
• 2 MOA dot size for long distance engagement.
• Can be used with any AA size battery.
For more technical information,
please see page 42
Aimpoint MPS3
The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief, allowing rapid
target acquisition and greatly increased first-shot hit probability. The MPS3 features
a manually adjustable reticule brightness control for all light conditions. Thanks to its
NVD compatibility, the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary
ACET technology gives the Aimpoint MPS3 an impressive battery life of up to 80,000
hours (8 years) of continuous use from a single AA battery!
The Aimpoint MGMount has been designed specifically for use with the MPS3. The MGMount contains a user friendly, 3-step ballistic compensator with preset range adjustments at 200, 800 and 1200 meters (220, 875, 1310 yards). This ballistic compensation
can be quickly changed by the operator without losing eye contact with the target, and
can be accomplished even while wearing gloves. The MGMount is compatible with all
M1913-Std Picatinny rails. A separate QD rail adaptor for M2 BMG is also available.
Military
28
Law Enforcement
www.aimpoint.com
Integrated Picatinny rails on top and side
for attachment of accessories such as a laser
aiming device
Call now Toll-free 1-877-246-7646
The MGMount comes with a 3- step ballistic
compensator. The MGMount can be bought
separately. For more information see page 34
Military
29
Law Enforcement
LPI
The Aimpoint LPI, IR Laser Aiming Device is an eyesafe, active infrared
aiming device for military and Law Enforcement applications. Designed
for use in darkness while wearing night vision goggles, the LPI projects a
laser aiming dot on the target, visible only to those wearing NVD’s.
Art. No. 10932
Export license/End-user certificate is required for this product.
Features
• Customized intensity setting according
to each unit’s needs. 2 effect levels can
be selected from 0,005-3,5mW. The
max and the min level can be separated
by a factor of no more than 20.
• Laser axis fully adjustable.
• Powered with same battery type (DL
1/3N) as some Aimpoint red dot sights.
• Fits right on Aimpoint CompM2 and
CompM3 sights.
• Submersible to 10 meters (30 ft).
• The smallest military IR Laser Aiming
Device available on the market.
Aimpoint LPI
The LPI is not designed for long range target illumination.
The selector switch on the Aimpoint LPI allows the user to
quickly change the desired intensity of the IR beam. The
LPI sighting laser can be quickly adjusted for windage and
elevation independent of the red dot sight it is mounted on.
A remote on/off switch with custom cable lengths allows the
LPI to be activated without the operator changing their grip
on the weapon.
The Aimpoint LPI is a perfect complement to the passive
aiming system of Aimpoint sights. This extremely compact
laser can be mounted directly on the top ring of an Aimpoint
CompM2 or CompM3 sight, or on any Picatinny rail using the
correct adaptor. The LPI is an eye-safe IR laser designed for
tactical team use in building clearing or close combat conditions without overpowering your night vision equipment or
reflecting off of interior surfaces.
Technical Specifications
Article No. 10932
Light source
Setting High
Setting Low
Wavelength
840 nm (IR)*
840 nm (IR)*
Adjustment of laser beam
Power supply
Battery
Beam output power
0.1 mW**
0.005 mW**
1 Click = 0.28 mrad
Quantity
1
Power
3V
Beam Shape
5 x 2 mm
5 x 2 mm
Beam divergence
typ 0.5 mrad
typ 0.5 mrad
Adjustment range of laser beam
Size
DL1/3N, 2L76
Laser class
1**
± 20 mrad
Type
LiMn02
Unless indicated otherwise, the data is accurate at ambient room temperature and normal operating conditions
* Typical
** Important notice: Beam output power will be set as required by the user. The user is solely responsible for the observation of the applicable safety regulations. The max and the min level can be separated by a factor of no more than 20.
Mounting solutions
The Aimpoint LPI can be mounted with any of the following interfaces.
Note
To make the product complete, a cable with switch and a mount interface must be determined by
the user and ordered with the Aimpoint LPI. 4 different mounting solutions are available and the
cable is offered at customized length.
Reinforced cable
The length (y in mm) of the reinforced cable with waterproof
switch pad shall be measured as shown on the drawing beside:
LPI-S
Mount for Aimpoint® standard ring LPI-Q
Mount for Aimpoint® QR ring
LPI-A
Mount for ARMS ring
LPI-P
QR Mount for Picatinny Rail
Military
30
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
Military
31
Law Enforcement
Aimpoint®
Mounting Solutions
& Accessories
ounting Solutions • Accessories • Mounting Solutions • Accessories • Mounting Solutions • Accessories • Mounting Solutions • Accessories • Mounting Solutions • Accessories • Mounting Solutions
’’
Military
32
Law Enforcement
Accessories for any mission and
mounts for every application.
’’
Military
33
Law Enforcement
Mounting
Solutions
TwistMount
TwistMount Ring
Spacer
SRP-L
Separate ring
for TwistMount
Art. No. 12238 *
Spacer for QRP/QRW and
Twist Mounts. Raises height of
optical axis from 30 to 39 mm
Art. No. 12227 *
Low Wide Ring, 30 mm
Black, for CompM2,
ML2, M3 and ML3.
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12243 *
For CompM2, ML2,
M3 and ML3. Base
and Top 30 mm ring.
Fits QRP2, QRW2,
TRP and TNP Mounts
Art. No. 12194 *
SRW-L
Low Wide Ring, 30 mm
Black, for CompM2, ML2,
M3 and ML3.
Fits on Weaver rail
Art. No. 12244 *
Quick Release Picatinny (MIL-STD 1913) Mount.
Fits CompM4 and Ring Base & Top.
Return to zero after dismounting (Spacer is
necessary for M4 flat top rifles and carbines)
Art. No. 12195 *
LRP Mount
Lever Release Picatinny Mount
for CompM4 and Ring Base & Top.
Return to zero after dismounting.
Screws, Allen key and thread sealer
included.
Art. No. 12198
CEU High Rise ring
MGMount for MPS3
Ring for CEU. Fits on
TwistMount Base 39 mm
height of optical axis
Art. No. 12203
Contains a 3-step ballistic compensation for 200, 800 and 1200
meters (220, 875, 1310 yards)
distances. The mount is also used
to zero the MPS3 sight.
Export license/End-user certificate is required for this product.
Art. No. 11925 *
NSN No. 1240-01-551-6720
Extension Spacer
Spacer for CompM4 and
CompM2/M3 in conjunction with Art. No. 12194.
Mount raises height of optical axis from 30 to
39 mm and brings sight 40 mm forwards
Art. No. 12193 *
Micro LRP Mount
Standard Spacer
Ring for CEU. Fits on
TwistMount Base 30 mm
height of optical axis
Art. No. 12202
Separate base
for TwistMount
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12236
QRP2 Mount
Ring Base & Top
CEU Low Rise ring
TwistMount Base
Complete Quick Release
Mount for 3XMag and CEU
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12234 *
QRW2 Mount
Quick Release Weaver Mount
Fits CompM4 and Ring Base & Top.
Return to zero after dismounting (Spacer is
necessary for M4 flat top rifles and carbines)
Art. No. 11758 *
Spacer for CompM4 and
CompM2/M3 in conjunction with
Art. No. 12194. Mount raises height
of optical axis from 30 to 39 mm
Art. No. 12192 *
Micro 11 mm Dovetail Mount
Fits most of the 11 mm Dovetail
Bases ranging from 10-12,5 mm
Screws and Micro Tool included
Art. No. 12215
Micro Glock Mount
TNP Mount
Torsion Nut Picatinny
(MIL-STD 1913) Mount
Fits CompM4 and Ring
Base & Top
Art. No. 12197 *
For Micro sights
Fits Glock pistols. Screws,
Micro Tool and Allen key included.
Art. No. 12437
Lever Release Picatinny Mount for Micro sights.
Return to zero after dismounting.
Screws, Micro tool and thread sealer included.
Art. No. 12905 *
Micro Spacer Low
Only for Micro T-1.
Raises height of optical axis to 30 mm.
Four screws (torx), Micro Tool and
thread sealer included
Art. No. 12357
Micro Spacer High
Only for Micro T-1.
Raises height of optical axis to 39 mm for
cowitness with AR-15. Four screws (torx),
Micro Tool and thread sealer included
Art. No. 12358
Micro LRP Mount Kit
Kit to convert Micro sights standard Mount
to Lever Release Picatinny
Art. No. 12184
* Screws and Allen key included
Military
34
Law Enforcement
www.aimpoint.com
Call now Toll-free 1-877-246-7646
Military
35
Law Enforcement
Warranty & Customer Service
Accessories
Warranty Information
Flip-up Rear Cover
Flip-up Front Cover
For PRO & Comp sights
Art. No. 12223
For PRO & Comp sights
Art. No. 12224
ARD
KillFlash® filter for PRO & Comp sights
Art. No. 12239
Aimpoint values your business and always attempts to provide
you the very best of products and services. That’s why we back
our products with one of the best guarantees in the industry.
Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal
use from the date of purchase for ten (10) years for personal
use and two (2) years for professional or competition use. If
a defect that is covered by our warranty occurs during that
period, Aimpoint, at its option, will either repair, or replace
the product.
Dealership Eligibility
Flip-up Front Cover
Transparent
For PRO & Comp sights
Art. No. 12241
Flip-up Rear Cover
Transparent
For PRO & Comp sights
Art. No. 12240
Yellow Filter
Yellow Filter for contrast increase.
Fits rear of PRO & Comp sights
Art. No. 12218
Polarization Filter
Polarization Filter for reduction of
sun reflection. Fits rear of
PRO & Comp sights
Art. No. 12216
Dealership eligibility and requirements for the USA may be
obtained by contacting Aimpoint Inc. at 1-877-246-7646.
Customer Service
Here at Aimpoint, we are delighted to have you as a customer.
In addition to offering the best products in the marketplace,
we are committed to providing our valued customers with
the finest customer service available.
Whatever your question, comment, or problem, just give us a
call Toll Free at 1-877-246-7646 between 9 am and 5 pm (EST),
Monday-Friday, or e-mail us anytime at [email protected]
Our courteous and informed staff is ready to help.
US Exports
Export of Aimpoint products are regulated by the US Dept of
Commerce and State Department, among others. Violation
of US export regulations can result in significant fines, loss
of export privileges, and criminal prosecution. As products
of Sweden, many Aimpoint products also require re-export
approval by Swedish authorities.
All Rights Reserved
All Aimpoint products are covered by several international patents. Comp is a registered trademark of Aimpoint AB, Malmö,
Sweden. We reserve the right to make design and/or material
modifications without further notice. This printed material is for
information purposes only and does not constitute any binding
obligation, or agreement by Aimpoint AB.
© 2012 Aimpoint AB
Flip-Up Front Cover with ARD
(open & closed) For PRO & Comp sights
Art. No. 12462
AA Battery
Alkaline
For CompM4
and MPS3
Art. No. 12242
Micro Tool
Art. No. 12207
Lens Cover
For PRO, CompM2, CompML2 and
CompM3, CompML3 mounted with
Quick Release
Art. No. 12228
Double Battery Kit
For CompM2, CompML2, and
CompM3, CompML3
Art. No. 12247
Rubber Bikini Lens Cover
For CompM4
Art. No. 12205
Rubber Bikini Lens Cover
For Micro sights
Art. No. 12204
’’
Why I trust Aimpoint
One of the questions you hear all the time is; ”why are Aimpoint sights so much more
expensive than other red dots?. Aren’t they all basically the same?” Well, the answer is
of course, “no, they are not”. Recently, I got to experience this difference myself. A few
months ago we were at a remote range doing some shooting and product testing. I was
switching optics back and forth on various carbines and when I got home I couldn’t find my
Micro T-1. I was NOT happy! A couple of searches of the area failed to locate the lost sight.
This past weekend we were back at this range (3 months since I lost the sight) and spent
some time searching with the help of a metal detector. After about 45 minutes my son
yells, “dad, I found it!” It had been completely buried under the sand.
I looked at my T-1, caked in sand and clay mud and just cringed. I washed the sight off and
found the dot was still lit! I dried it off, mounted it on my Wilson Recon 5.56 and shot some
targets. Amazingly, the sight was 100% good to go.
Might cheaper brands still have worked? Maybe, maybe not, but I know beyond any doubt
that I can trust Aimpoint sights to work when I need them, despite the occasional abuse.
DL1/3N, Lithium Battery
For PRO, CompM2,
CompML2, and CompM3,
CompML3
Art. No. 10315
Military
36
Law Enforcement
CR 2032
Lithium Battery
For Micro sights
Art. No. 12211
Outer Rubber Cover
Color: Dark Earth Brown
Fits CompM3 & CompML3
Art. No. 12226
Outer Rubber Cover
Color: Black
Fits CompM3 & CompML3
Art. No. 12225
Charles Coker
Tacticalgunreview.com
’’
Military
37
Law Enforcement
System-of-Systems
Aimpoint®
System-of-Systems
Integrated combat optics solution
Aimpoint has distinguished itself as a supplier of sophisticated modular sighting systems, offering end users not just
stand alone products but rather complete modular optical
solutions. Although the primary focus for Aimpoint has al-
CEU
In our System-of-Systems solution, the versatile TwistMount
enables accessories such as the Aimpoint 3XMag (magnification
module, see picture below) and the Aimpoint CEU (concealed
engagement unit, see picture below) to be rapidly fixed behind
Aimpoint sights. Night Vision Devices (NVD’s) of all types
and generations can also be added as part of this modular
system.
Military
38
Law Enforcement
ways been the electronic reflex collimator (red dot) sight.
We also offer a choice of modular accessories that can be
used together with Aimpoint sights in order to enhance an
operator´s capabilities.
3XMag
Since the accessories are placed behind the red dot sight,
they do not affect the point of impact. Therefore, they can
easily be passed from one member of a unit to another as
long as both weapons are outfitted with the proper interface
– the base of the Aimpoint TwistMount which fits any MILSTD 1913 Picatinny rail.
There is simply no other device on the market using the
same technology. Aimpoint’s modular System-of-Systems
approach enables the operator to modify their equipment
for each specific mission, and to rapidly adapt to changing
conditions in the field.
Military
39
Law Enforcement
Getting the Most from Your Aimpoint Sight
Aim straight, shoot better
How to zero
A
Military
Fig 1
Fig 2
1. Set up target at close range (less than 25 yards).
2. Place firearm in solid rest and center
dot on target.
3. Take one shot.
B
Fig 3
4. Replace firearm on solid rest with dot
on target (A).
5. Without moving the firearm, turn
adjustment screws until red dot is centered over bullet´s point of impact (B).
6. Repeat as necessary until point of aim
and point of impact are the same.
Aimpoint sights are easy to zero
Aim straight, shoot better
CAUTION: Place the firearm in a safe condition prior to handling
or making any sight adjustments.
Aimpoint’s red dot sights are optically centered. That means
that if the mount base is properly aligned with your firearm’s
action, only minor adjustments should be necessary. It is easiest if you start the zeroing process from a short distance. We
recommend 25 yards or less. This allows you to immediately
see if further adjustments need to be made, which in turn can
save you time and ammunition.
Once you have set up a target, get the firearm in a solid rest,
aim at center of the target, take your first shot and inspect the
point of impact, (fig 1&2). Check how well the sight is zeroed
and then make any necessary adjustments (fig 3). Aimpoint’s
adjustment screws are located on the top and sides of the
sight, which allows for impact points to be moved up/down
or right/left. After zeroing the sight at 25 yards, you are ready
to zero at greater distances.
It’s simple. Keep both eyes open.
For a moment, lower your firearm and focus both eyes on the
target. Next, without taking your eyes off the target, bring
your firearm into position so that you are now looking at the
target through the Aimpoint sight (fig 4). The red dot will
now be on the target (fig 5). It’s that easy! When the dot is
on target, so are you. Since all Aimpoint sights are parallax
free, you never have to worry about centering the red dot
inside the sight.
40
Law Enforcement
Fig 4
Fig 5
Fig 6
Learn to aim with both eyes open without taking your eyes of the target.
With your firearm shouldered, with
both eyes open and focused on the
target, the dot will naturally appear
where you want your shot to hit.
Practice aiming with both eyes open
and the front lens of the sight covered. After some training, you will be
able to aim your firearm more easily
and faster than ever before.
We recommend this simple training exercise.
Cover the front of your Aimpoint sight with the lens cover
(fig 6). Then bring your firearm into position while keeping
both eyes focused on the target. The red dot will now be
on the target (fig 5).
Practicing this simple procedure will get you comfortable
with keeping both eyes open while aiming at the target.
That’s because with a traditional sight, your field of view is
limited. You lose valuable time focusing through the sight
rather than focusing on the target. You also lose eye contact with the target and you don’t get a general view of the
situation and surroundings.
After performing these exercises you are ready to get the
most out of your Aimpoint sight. You will see how much
easier and faster it is to aim your firearm with an Aimpoint
sight and you will improve your shooting.
Mounting the sight
With the variety of models available, there is an Aimpoint
sight for virtually every type of firearm. For a sight and a gun
to function as a reliable unit year after year, it is important
that the mounting is done professionally and the mounting
rings and bases are of high quality.
The Aimpoint red dot sight does not have a critical eye
relief. This provides great freedom in locating the sight
along the length of the rifle, and makes it very easy to fit
them into a modular system that allows the mounting of
several different types of sights on the same rifle.
Military
41
Law Enforcement
Micro T-1 Micro H-1
CompM4/M4s CompM3/ML3 CompM2/ML2 •
•
•
◦
•
•
•
•
•
•
•
-
-
•
Application Firearms
Pistol - Revolver
Carbine
PDW (personal weapon defence)
SMG (sub-machine gun)
LMG (light machine gun)
MMG (medium machine gun)
HMG (Heavy machine gun)
•
•
•
•
•
•
-
•
•
•
•
◦
◦
-
-
•
•
•
•
•
-
◦
•
•
•
•
•
-
◦
•
•
•
•
•
-
-
•
•
•
-
-
-
•
Technology
Working principle: Reflex collimator sight - red dot sight
x
x
x
x
x
x
x
Optical Data
LED (Light Emitting Diode) totally eye-safe
Light source wavelength, 650 mn red light
Red dot size - in MOA (minutes of angle)*
No parallax - No centering required
Unlimited eye relief
Band Pass coating for NVD**** compatibility
Anti-reflex coating all surfaces & multi-layer coating objective lens No magnification (1X)
x
x
4
x
x
x
x
x
x
x
4
x
x
x
x
x
x
x
2
x
x
x
x
x
x
x
4 or 2
x
x
CompM3 only
x
x
x
x
4
x
x
CompM2 only
x
x
x
x
2
x
x
x
x
x
x
x
2
x
x
x
x
x
Application areas
Law Enforcement
Armed Forces - Special Units
PRO MPS3 Electronic Data
One 3V Lithium battery, type
CR2032
CR2032
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
One AA battery, accepts 1.5-5V
x
x
Battery life in hours***
50 000 on setting 8
50 000 on setting 8
80 000 on setting 12
50 000 on setting 7
10 000 on setting 7
30 000 on setting 7
80 000 on setting 12
Battery life, in hours***, NVD position
500 000
500 000
500 000 CompM3 only
100 000 CompM2 only
300 000
500 000
Manual rotary switch - Dot intensity regulator
x
x
x
x
x
x
x
1 Off and daylight (DL) settings
12 DL
CompML3: 9 DL
CompML2: 9 DL
9 DL
NVD and daylight (DL) settings 1 Off, 4 NVD & 8 DL 7 NVD & 9 DL CompM3: 4 NVD & 6 DL
CompM2: 4 NVD & 6 DL 4 NVD & 6 DL
7 NVD & 9 DL
of which one extra bright
of which one extra bright of which one extra bright
of which one extra bright of which one extra bright of which one extra bright
Mechanical data
Material housing, extruded high strength aluminum
x
x
x
x
x
x
Surface finish, hard anodized, matte
x
x
x
x
x
x
Color black
x
x
x
x
x
x
Material lens covers -Thermoplastic Elastomer, black matte
x
x
x
Material lens covers - rubber - black - matte
x
x
x
Adjustment 1 click = 1/2” at 100yds
1/2” at 100yds
1/2” at 80yds
1/2” at 100yds
1/2” at 100yds
1/2” at 100yds
13 mm at 100m
13 mm at 100m
16 mm at 100m
13 mm at 100m
13 mm at 100m
13mm at 100m
Mounting methods Integrated Picatinny/ Integrated Picatinny/
Integrated QRP2
1 ring - 30mm
1 ring - 30mm
Integrated QRP2
Weaver
Weaver
(Quick release)
(Quick release)
x
x
x
x
2” at 100yds
50mm at 100m
Optional MGMount
Environmental data
Temperature range -20°- +140° F (-30° - +60° C)
x
Temperature range -50°- +160° F (-45° - +71° C)
x
x
x
x
x
x
Water resistance - submersible to 80ft. (25m)
Fully waterproof
150ft. (45m)
150ft. (45m)
80ft. (25m)
150ft (45m)
3ft. (1m)
No radioactive components used
x
x
x
x
x
x
x
Dimensions
Length
2.4” (62mm)
2.4” (62mm)
4.7” (120mm)
5.1” (130mm)
5.1” (130mm)
Width/height - sight only
1.6” x 1.4”
1.6” x 1.4”
2.1” x 2.4”
2.2” x 2.2”
2.2” x 2.2”
(41 x 36mm)
(41 x 36mm)
(53 x 60mm)
(55 x 55mm)
(55 x 55mm)
Width/height - including mount
2.4” x 1.6”
2.4” x 1.6”
2.8” x 2.8”
(62 x 41mm)
(62 x 41mm)
(72 x 72mm)
Maximum ring width
30mm
30mm
Weight - sight only 3.0oz (84g)
3.0oz (84g)
9.3oz (265g)
7.8oz (220g)**
7.8oz (220g)**
Weight - sight with integrated mount
3.7oz (105g)
3.7oz (105g)
11.8oz (335g)
Weight rubber cover
1.7oz (50g)
ARTICLE NUMBERs
4 MOA
11830
11910
CompM3:11403
CompML3:11405
2 MOA
CompM4: 11972
CompM4s: 12172
1240-01-551-5758
NSN - Numbers
CompM4: 1240-01-551-5762
CompM4s:
1240-12-382-6939
● primary use ◦ secondary use - not recommended 5.1” (130mm)
2.2” x 2.2”
(55 x 55mm)
2.95” x 2.95”
(75 x 75mm)
30mm
7.8oz (220g)**
11.6 oz (330g)
6.9” (175mm)
3.3” x 3.2””
(84 x 81mm)
3.3” x 4.9”
(84 x 124mm)
25.4oz (720g)
CompM2:10336
CompML2:10338
CompM3:11408
CompML3:11416
12841
CompM2: 1240-01-495-1385
11704
1240-01-551-5748
x applies for
* MOA (minute of angle) 1 MOA ͌ 30 mm at 100 meters 1”
͌ at 100 yards *** At room temperature
** Dimensions and weights for PRO, CompM2, ML2, M3, ML3 are given with flip-up lens covers **** Night Vision Device
Specifications are subject to change without notice.
Military
42
Law Enforcement
Military
43
Law Enforcement
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement