DHD599-GS DWU599-GS_UM.book

DHD599-GS DWU599-GS_UM.book
User Manual
020-001162-01
GS Series
DHD599-GS / DWU599-GS
The CD included with this printed manual contains an electronic copy in English. Please read all instructions before using or
servicing this product.
手册中包含的光盘,带有着中文的电子副本,使用或维修本产品前,请仔细查阅所有的指示。
Le DC fourni avec ce manuel imprimé contient une copie électronique en français. S'il vous plaît lire toutes les instructions avant
d'utiliser ou de réparer ce produit.
Das CD, das mit diesem gedruckten Handbuch eingeschlossen ist, enthält eine elektronische Kopie auf in deutscher Sprache. Vor
der Anwendung oder der Instandhaltung dieses Produktes lesen Sie bitte alle Anweisungen.
Il CD fornito con il manuale stampato contiene una copia elettronica in lingua italiano. Si prega di leggere tutte le istruzioni prima
di utilizzare o riparare questo prodotto.
この印刷されたマニュアルに同梱されております CD には、日本語での説明書が入っておりま
す。この製品を使用あるいは修理点検される際に、ご参照下さい。
매뉴얼과 함께 포함되어 있는 CD 에는 한글로 된 전자사본을 포함하고 있습니다 . 본 제품을 사용
혹은 서비스하기 전에 모든 지침 사항들을 읽어 보시기 바랍니다 .
Поставляемый в комплекте с документацией компакт-диск (CD) содержит электронную
копию руководства пользователя на русском языке. Перед началом использования
изделия или проведения сервиса пожалуйста прочтите все инструкции изложенные в
руководстве.
El DC incluido con este manual impreso contiene una copia electrónica en español. Por favor, lea todas las instrucciones antes de
usar o dar servicio a este producto.
Компакт диск, що постачається з цим друковане керівництво містить електронну копію
українською мовою. Будь ласка, прочитайте всі інструкції перед використанням або
обслуговуванням цього продукту.
O CD incluído com o impresso livro contém um eletrônico cópia em Português. Por favor lido todas as instruções antes de usar ou
prestando serviço esse resultado.
NOTICES
COPYRIGHT AND TRADEMARKS
Copyright © 2016 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a
commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the
user's own expense.
WARNING! Changes or modifications not expressly approved by Christie could void the user's authority to operate the product.
FOR COMMERCIAL USE ONLY - POUR USAGE COMMERCIAL UNIQUEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING 2 CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
CET APPAREIL NUMÉRIQUE DE CLASSE A EST CONFORME AUX NORMES DÉFINIES DANS LES RÉGLEMENTATIONS
CANADIENNES SUR LES APPAREILS CAUSANT DES INTERFÉRENCES RADIO (CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS, ICES-003, CLASS A).
!
!
!
!
!
-!
!
! !
!
!
!
!
!
!
!
!
/
!
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which
may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice.
Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of
the product in proper working conditions. Performance specifications are based on information available at the time of printing.
Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for
a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in
connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This
symbol
means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular
waste. Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate
collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
Canadian manufacturing facility is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie's limited warranty, please contact your Christie dealer. In addition to the other
limitations that may be specified in Christie's limited warranty, the warranty does not cover:
a. Damage occurring during shipment, in either direction.
b. Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video
tape recorders, etc., or use of the product with any non-Christie interface device.
c. Damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other natural disaster.
d. Damage caused by improper installation/alignment, or by product modification, if by other than a Christie authorized repair
service provider.
e. For LCD projectors, the warranty period specified applies only where the LCD projector is in "normal use". "Normal use"
means the LCD projector is not used more than 8 hours a day, 5 days a week. For any LCD projector where "normal use" is
exceeded, warranty coverage under this warranty terminates after 6000 hours of operation.
f. Failure due to normal wear and tear.
PREVENTIVE MAINTENANCE
Preventive maintenance is an important part of the continued and proper operation of your product. Please see the Maintenance
section for specific maintenance items as they relate to your product. Failure to perform maintenance as required, and in
accordance with the maintenance schedule specified by Christie, will void the warranty.
Content
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Laser safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Projector components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Right view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Built-in keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Input/Output (I/O) panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
IR remote keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
LED status indicators
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Laser LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Picture Mute LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting to video equipment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Turning the projector on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Turning the projector off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the projector position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Portrait Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Calculating the lens offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
WUXGA projectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
HD Projectors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing and installing the lens
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installing the cable cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the ceiling mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Size and Position menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Geometry correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Image Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
5
Content
Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Image blending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Color matching
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Light Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
For DHD models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
For DWU models
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Input Switching & PIP menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
PIP/PBP layout and size
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Language menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Test Pattern menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Web user interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Logging on to the web user interface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Main tab–General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Main tab–Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Main tab–Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Administrator Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
About Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Christie Presenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Connecting to the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Installing the Christie Presenter software
Using the Christie Presenter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Connecting and searching the network display . . . . . . . . . . . . . . . . . . . . . . . . . 68
Selecting the display region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Configuring Christie Presenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Managing all connected network displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Operating the card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
No image appears on screen
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Incorrectly displayed image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Presentation is not displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Unstable or flickering images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Vertical flickering bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Image is out of focus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Image is stretched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Image is not the correct size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
6
Content
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PIP/PBP compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Key features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
List of components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Physical operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Electro-Magnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Marking
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Federal Communications Commission (FCC) warning . . . . . . . . . . . . . . . . . . . . . . . 88
On-screen display tree
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
7
Safety
Read through this document in its entirety and understand all warnings and precautions before
attempting to operate the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage.
• To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
• Do not open or disassemble the projector as this may cause electric shock.
• When you turn the projector off, wait 180 seconds for the projector to cool down before you
disconnect the projector from power.
• All installation and maintenance procedures must be performed by a Christie accredited service
technician.
• Keep all combustible material away from the concentrated light beam of the projector.
• Position all cables where they cannot contact hot surfaces or be pulled or tripped over.
• Always power down the projector and disconnect all power sources before servicing or cleaning.
• Use a soft cloth moistened with a mild detergent to clean the display housing.
• Disconnect the power plug from the AC outlet if the product is not being used for an extended
period of time.
• Use only the AC power cord supplied. Do not attempt operation if the AC supply and cord are not
within the specified voltage and power range for your region.
• Remove the lens plug from the lens opening in the projector before installing the lens. Retain the
lens plug to protect the optical components from dust and debris during transport.
• Do not block the ventilation slots and openings on the projector.
• Do not use abrasive cleaners, waxes or solvents to clean the projector.
• Do not allow anything to rest on the power cord.
.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
8
Safety
Laser safety warnings
This projector is a Class 3R laser device that complies with IEC 60825-1:2007, CFR 1040.10 and
1040.11. This projector is classified as Risk Group 2 according to IEC 62471:2006.
Complies with 21CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No.50,Dated
June 24, 2007
IEC 62471:2006 RISK GROUP 2
CAUTION
Possibly hazardous optical radiation emitted from
this product.
Do not stare into the beam. May be harmful to the
eyes.
IEC 62471:2006桶昑乬⇓2;
㲐シ
㛔ṏ⑩⎗ 傥⍹⮬㚱⭛䘬⃱弸⮬
⊧䚜奮⃱ 㜇炻⎗傥⮡䛤䜃㚱⭛
IEC 62471:2006 RISQUES DE GROUPE 2
ATTENTION
LE PRODUIT PEUT ÉMETTRE DES RADIATIONS
OPTIQUES DANGEREUSES.
NE PAS RESTER DANS LA TRAJECTOIRE DU
FAISCEAU, PEUT ÊTRE DANGEREUX POUR LES
YEUX.
IEC 62471 : 2006!㟺䛎GỮ⧯G2
㧲㡎
㡪G㤒䕾㛆㈒Gⴟ㺒G㘺⪾ⒺG㠖䙪GḇGⴟㆢ㈖U
ḇ㈖㠺G㡇㏒䙎㪶G⪾㏣㏒㜚UG⋾㛆G㠖䙪G䙖G㌎G㡾㎫⎾⏚U
IEC 62471:2006΢ͱͧͨΣΰΏ2
嬎⏲
̯̔墥⑩ ̌͊↢≃̖͍͌⃱̰ἧ䓐䉞㱩̧̬͉̤̰⻟
≃̫⃱̩ ̫͋║࡟ᝏᙳ 㡪ࢆཬࡰࡍ࠾ࡑࢀࡀ࠶ࡾࡲࡍࡢ࡛ග※ࢆ┤
どࡋ࡞࠸ ࡛ࡃࡔࡉ࠸ࠋ
IEC 60825-1:2007
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
WAVE LENGTH : 440-455nm, Max .power 122 mW
PULSE DURATION : 2.2 ms
IEC 60825-1: 2007
Τΰͮ㓦⮬
䚜 ㍍ 䚖 ̹ ̯!塓 㚅 ͓ 性 ̒ ͌ ̔ ̩
ͧΡͱ4SΤΰͮ墥⑩
㲊 攟 䭬 ⚚;!440-455nm-!㚨⣏ΉΧΰ;!122 mW
ΉΣͱ㊩䵂!㗪攻;2.2 ms
IEC 60825-1:2007
㽨⃱弸⮬
性⃵䚜㍍㍍妎䛤䜃
4 S㽨 ⃱ ṏ ⑩
㲊 攧 烉440-455nm-!㚨 ⣏ 弻 ↢;122 mW
傱 ⅚ ㊩ 井 㖞 斜 烉2.2 ms
IEC 60825-1: 2007
RAYONNEMENT LASER
ÉVITE L'EXPOSITION DIRECT DES YEUX AU LASER
PRODUCT LASER DE 3R
LONGUEUR D’ONDE :440-455nm SORTIE MAXIMALE : 122mW
DURÉE DE L’IMPULSION: 2.2ms
IEC 60825-1: 2007
Τΰͮ㓦⮬
䚜㍍䚖̹̯!塓㚅͓性̩̒͌̔
ͧΡͱ4SΤΰͮ墥⑩
㲊攟䭬⚚;!440-455nm-!㚨⣏ΉΧΰ;!122 mW
ΉΣͱ㊩䵂!㗪攻;2.2 ms
IEC 60825-1 : 2007
⣾㡪㣶Gⴟㆢ
㪷㤇G⋾G≮㺒㠺G䘲䙪㙲
CLASS 3R ⣾㡪㣶G㤒䕾
䐂㢛GaG440-455nmGG㡎G㹒⏶GU—–žŒ™G122 m~㡎
䑺㎚G㪶㊃G㏒ᳺGaG2.2ms
Laser warning label is located at the rear side of the projector as shown in the illustration below.
HDBaseT
REMOTE
IN
REMOTE
OUT
HDMI IN
VGA IN
VGA OUT
DISPLAY PORT IN
DVI IN
MINI USB
Complies with 21CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No.50,Dated
June 24, 2007
IEC 62471:2006 RISK GROUP 2
CAUTION
Possibly hazardous optical radiation emitted from
this product.
Do not stare into the beam. May be harmful to the
eyes.
IEC 62471:2006桶 昑 乬 ⇓2;
㲐シ
㛔ṏ⑩⎗傥⍹⮬㚱⭛䘬⃱弸⮬
⊧䚜奮⃱㜇炻⎗傥⮡䛤䜃㚱⭛
IEC 62471:2006 RISQUES DE GROUPE 2
ATTENTION
LE PRODUIT PEUT ÉMETTRE DES RADIATIONS
OPTIQUES DANGEREUSES.
NE PAS RESTER DANS LA TRAJECTOIRE DU
FAISCEAU, PEUT ÊTRE DANGEREUX POUR LES
YEUX.
IEC 62471 : 2006!㟺䛎GỮ⧯G2
㧲㡎
㡪G㤒䕾㛆㈒Gⴟ㺒G㘺⪾ⒺG㠖䙪GḇGⴟㆢ㈖U
ḇ㈖㠺G㡇㏒䙎㪶G⪾㏣㏒㜚UG⋾㛆G㠖䙪G䙖G㌎G㡾㎫⎾⏚U
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
ETHERNET
CVBS
S-VIDEO
IEC 62471:2006΢ͱͧͨΣΰΏ2
嬎⏲
̯̔墥⑩̌͊↢≃̖͍͌⃱̰ἧ䓐䉞㱩̧̬͉̤̰⻟
≃ ̫ ⃱ ̩ ̫ ͋║࡟ᝏᙳ㡪ࢆཬࡰࡍ࠾ࡑࢀࡀ࠶ࡾࡲࡍࡢ࡛ග※ࢆ┤
どࡋ࡞࠸࡛ࡃࡔࡉ࠸ࠋ
IEC 60825-1:2007
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
WAVE LENGTH : 440-455nm, Max .power 122 mW
PULSE DURATION : 2.2 ms
IEC 60825-1: 2007
Τΰͮ㓦⮬
䚜㍍䚖̹̯!塓㚅͓性̩̒͌̔
ͧ Ρ ͱ4 SΤ ΰ ͮ 墥 ⑩
㲊 攟 䭬 ⚚;!440-455nm-!㚨 ⣏ ΉΧ ΰ;!122 mW
ΉΣͱ㊩䵂!㗪攻; 2.2 ms
IEC 60825-1:2007
㽨⃱弸⮬
性⃵䚜㍍㍍妎䛤䜃
4S㽨⃱ṏ⑩
㲊 攧 烉440-455nm-!㚨 ⣏ 弻↢;122 mW
傱⅚㊩井㖞斜烉2.2 ms
IEC 60825-1: 2007
RAYONNEMENT LASER
ÉVITE L'EXPOSITION DIRECT DES YEUX AU LASER
PRODUCT LASER DE 3R
LONGUEUR D’ONDE :440-455nm SORTIE MAXIMALE : 122mW
DURÉE DE L’IMPULSION: 2.2ms
IEC 60825-1: 2007
Τΰͮ㓦⮬
䚜㍍䚖̹̯!塓㚅͓性̩̒͌̔
ͧΡͱ4SΤΰͮ墥⑩
㲊攟䭬⚚;!440-455nm-!㚨 ⣏ Ή Χ ΰ;!122 mW
ΉΣͱ㊩䵂!㗪攻; 2.2 ms
IEC 60825-1 : 2007
⣾㡪㣶Gⴟㆢ
㪷㤇G⋾G≮㺒㠺G䘲䙪㙲
CLASS 3R ⣾㡪㣶G㤒䕾
䐂㢛GaG440-455nmGG㡎G㹒⏶GU—–žŒ™G122 m~㡎
䑺㎚G㪶㊃G㏒ᳺGaG2.2ms
K
Laser aperture warning:
Laser aperture warning label is located on top of the projector as shown in the illustration below.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
9
Safety
Warning! Failure to comply with the following could result in death or serious injury.
• CLASS 3R LASER PRODUCT-AVOID DIRECT EYE EXPOSURE
• When turning on the projector, make sure no one within projection range is
looking at the lens.
• Keep any items (magnifying glass etc.) out of the light path of the projector.
The light path being projected from the lens is extensive, therefore any kind of abnormal objects
that can redirect light coming out of the lens, can cause an unpredictable outcome such as a fire or
injury to the eyes.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk of
hazardous laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage by the exposure of laser
radiation.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye
damage.
• Follow the control, adjustment or operation procedures to avoid damage or injury from exposure of
laser radiation.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
10
Introduction
The product specified in this document is a high brightness, high-resolution video/graphics 1-chip
laser based projector. The projector is available in HD and WUXGA resolutions. The projector utilizes
Digital Light Processing (DLP®) technology from Texas Instruments. It is primarily designed
for fixed installation markets.
Projector components
Identify the main components of the projector.
Front view
Identify the main components on the front of the projector.
1
2
3
4
ID
Part name
Description
1
Front IR sensors
Receives signals from the IR remote keypad. Keep the signal path to the sensor
unobstructed for uninterrupted communication with the projector.
2
Projection lens
Allows automated lens control and adjustment: vertical and horizontal offsets,
zoom, and focus.
3
Lens ring
Protects the lens motors and mechanism. Remove in order to insert or remove the
lens.
4
Adjustable feet
Raises or lowers the feet to level the projector.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
11
Introduction
Rear view
Identify the main components on the rear of the projector.
1
HDBaseT
REMOTE
IN
REMOTE
OUT
HDMI IN
VGA IN
VGA OUT
DISPLAY PORT IN
DVI IN
2
MINI USB
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
ETHERNET
CVBS
S-VIDEO
3
4
K
5
ID
Part name
Description
1
Rear IR sensor
Receives signals from the IR remote keypad. Keep the signal path
unobstructed for uninterrupted communication with the projector.
2
Input/Output (I/O) panel
Connects the projector to external devices.
3
AC input
Connects to the supplied power adapter (100-240V~).
4
Power button
Powers the projector on or off.
5
Kensington lock
Secures the projector to counter tops, tables, and so on.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
12
Introduction
Left view
Identify the main components on the left side of the projector.
1
ID
Part Name
Description
1
Cooling air vents (intake)
Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
Right view
Identify the main component on the right side of the projector.
1
2
3
ID
Part Name
Description
1
LED Status Indicators
Displays the status of the projector. They are (from left to right): LASER,
STATUS, and PIC MUTE.
2
Built-in keypad
Controls the projector.
3
Cooling air vents
(exhaust)
Provides cooling to the projector. Keep these vents unobstructed to prevent
the projector from overheating.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
13
Introduction
Built-in keypad
The built-in keypad controls the projector.
7
1
2
8
3
4
9
5
10
6
11
ID
Part Name
Description
1
Menu
Displays the menus.
2
Power
Turns the projector on or off.
3
Enter
Confirms a selection.
4
Auto
Automatically optimizes an image.
5
Lens
Adjusts the lens vertical or horizontal offset setting.
6
Focus
Adjusts the focus.
7
Arrow keys
Adjusts a setting up or down, or navigate within a menu.
8
Exit
Returns to the previous level or exits the menus if at top level.
9
Input
Selects an input for the main or PIP/PBP image.
10
Picture mute
Displays or blanks the video image.
11
Zoom
Adjusts the zoom.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
14
Introduction
Input/Output (I/O) panel
Identify the components of the Input/Output (I/O) panel.
1
2
HDBaseT
REMOTE
IN
3
4
5
6
REMOTE
OUT
HDMI IN
VGA IN
7
VGA OUT
8
DISPLAY PORT IN
DVI IN
MINI USB
GREEN/Y
BLUE/PB
RED/PR
RS232
9
10
11
USB
ETHERNET
12
13
CVBS
14
ID
Connector name
ID
Connector name
1
HDBaseT
9
COMPONENT IN (YPbPr)
2
REMOTE IN
10
RS232
3
REMOTE OUT
11
MINI USB
4
HDMI IN
12
USB
5
VGA IN
13
ETHERNET
6
VGA OUT
14
CVBS
7
DISPLAY PORT IN
15
S-VIDEO
8
DVI IN
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
S-VIDEO
15
15
Introduction
IR remote keypad
The IR remote keypad communicates with the projector by way of wireless communications.
Use a cable length of 20 m or less. If the length of cable exceeds 20 m, the IR remote keypad may
not work correctly.
1
2
16
3
17
4
18
5
19
20
6
21
7
22
8
9
23
10
24
25
11
26
12
27
13
14
28
15
29
ID
Part Name
Description
1
SHUTTER
Displays or blanks the video image.
2
Power on
Turns the projector on.
3
Gamma
Adjusts the mid-range levels.
4
Bright
Adjusts the amount of light in the image.
5
PIP/PBP
Turns PIP/PBP on or off.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
16
Introduction
ID
Part Name
Description
6
Size
Adjusts the PIP/PBP size.
7
Number Keys
Enter a number, such as a channel, value, and so on. The
on-screen display indicates if a function is not supported.
8
Help
Displays the instructions for source connection.
9
Menu
Displays the menus.
10
Arrow Keys
Adjusts a setting up or down to navigate within a menu.
11
Test
Displays a test pattern.
12
Auto
Automatically optimizes an image.
13
OSD
Use to hide or show on-screen display (OSD) menus.
14
Keystone H
Adjusts the horizontal keystone.
15
Keystone V
Adjusts the vertical keystone.
16
Standby
Turns the projector off.
17
Contrast
Adjusts the difference between dark and light.
18
Hot key
Selects your preset key quickly.
19
Swap
Swaps the main and PIP/PBP images.
20
Layout
Adjusts the PIP/PBP layout.
21
Focus
Adjusts the focus to improve image clarity as required.
22
Zoom
Adjusts the zoom to achieve a required image size.
23
Proj
Changes the IR remote keypad ID.
• To assign an ID, press Proj + <1 to 9>.
• To return to the universal IR remote ID, press Proj + 0.
24
Exit
Returns to previous level or exit menus if at top level.
25
Enter
Selects a highlighted menu item, or changes or accepts a
value.
26
Input
Selects an input for the main or PIP/PBP image.
27
Info
Displays the source image information.
28
Lens H
Adjusts the position of the image horizontally.
29
Lens V
Adjusts the position of the image vertically.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
17
Introduction
LED status indicators
LEDs are defined below.
Laser LED
Identify the laser diode state colors and meaning.
LED Status
Projector State
Red (flashing)
Projector has lost over 60% initial luminance.
Orange (solid)
Laser diode time has expired.
Green (solid)
Laser diode is on and operating correctly.
Off
Laser diode is off.
Status LED
Identify the LED state colors and meaning.
LED Status
Projector State
Off
AC power is off (without AC plugged in).
Off, but keypad LED is on
AC has been applied, projector is in standby mode.
NOTE: Status LED cannot be flashing red, as this is reserved for an error condition.
Status LED is off but keypad LED will indicate Standby Mode.
Green (solid)
Projector is powered up and operating normally.
Green (flashing)
Projector communications.
Orange (flashing)
Projector is in cool down mode or startup mode.
Green (flashing) / Orange
(solid)
Projector is in flash update state.
Red (solid)
Over-temperature.
Red (flashing)
Fan failure.
Picture Mute LED
Identify the picture mute LED state colors and meaning.
LED Status
Projector State
Green (solid)
Light is on and an image is displayed.
Orange (solid)
Light is on and the image is blank.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
18
Installation
Learn how to install, connect, and optimize the projector display.
Connecting to a computer
Learn what cables/connectors that may be used to connect to various devices.
Desktop
Laptop
Monitor
9
1
3
2
HDBaseT
REMOTE
IN
REMOTE
OUT
HDMI IN
4
6
5
VGA IN
VGA OUT
8
7
DISPLAY PORT IN
DVI IN
MINI USB
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
ETHERNET
CVBS
S-VIDEO
ID
Connector name
ID
Connector name
ID
Connector name
1
RS232 cable
4
USB type B Mini cable
7
DVI-D in cable
2
HDMI cable
5
USB type A cable
8
VGA out cable
3
VGA in cable
6
Display Port cable
9
Power cord
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• This diagram is for illustrative purposes only, and does not indicate that these accessories are
supplied with the projector.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
19
Installation
Connecting to video equipment
Learn what cable/connectors may be used to connect to various devices..
Component video output equipment
DVD player
Video cassette recorder
3
5
1
7
2
8
4
6
HDBaseT
REMOTE
IN
REMOTE
OUT
HDMI IN
VGA IN
VGA OUT
DISPLAY PORT IN
DVI IN
MINI USB
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
ETHERNET
CVBS
S-VIDEO
ID
Connector name
ID
Connector name
ID
Connector name
1
Component (YPbPr) cable
4
VGA in cable
7
CVBS cable
2
HDMI cable
5
3 RCA Component cable
8
S-Video cable
3
VGA to Component
6
15-pin to 3 RCA
Component/HDTV
Adapter
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• This diagram is for illustrative purposes only, and does not indicate that these accessories are
supplied with the projector.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
20
Installation
Turning the projector on
The projector cables must be securely connected before turning the power on.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage
1. Ensure that the power cord and signal cable are securely connected.
The Power button on the built in keypad is illuminated.
2. Ensure that no one or no objects are in the beam path before turning on the projector.
3. Turn on the projector by pressing
keypad.
on the remote control or pressing
The status LED is orange with a long blink.
on the built-in
2
1
4. Turn on the source. Press the Input button on the remote control to select an input source.
3
1
Available input sources are VGA, BNC, HDMI, Component, S-Video, and Composite Video.
The projector detects the source you selected and displays the image.
2
1
2
1
Power on
Power on
3
1
Input Key
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
21
Installation
Turning the projector off
Power off the projector in preparation for inspection or maintenance.
1. Press
on the built-in keypad or on the remote control to turn off the projector.
A warning message appears on the displayed image.
2. Press
again to confirm your selection.
If you do not press
again, the warning message disappears after 10 seconds and the
projector remains on.
Adjusting the projector position
When you select a position for the projector, consider the size and shape of your screen, the
location of your power outlets, and the distance between the projector and the rest of your
equipment. Follow these general guidelines:
•
Position the projector on a flat surface at a right angle to the screen. The projector (with the
standard lens) must be at least 3 feet (0.9 m) from the projection screen.
•
Position the projector to the required distance from the screen. The distance from the lens of
the projector to the screen, the zoom setting, and the video format determine the size of the
projected image.
•
Determine the lens throw ratio:
•
•
Lens 1.22~1.53 (WU/HD)
•
Lens 0.95~1.22 (WU/HD)
•
Lens 1.52~2.89 (WU/HD)
•
Lens 0.75~0.95 (WU/HD)
•
Lens 2.90~5.50 (WU/HD)
Do not roll the projector more than 20 degrees from side to side.
20°
20°
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
22
Installation
•
360 degree operation (along the widest axis)
360°
Portrait Mode
•
The projector is in portrait mode when the viewing angle is from 60° to 120° as illustrated
below.
Warning! In portrait orientation, the Portrait Side Cover must be installed on the side of the
projector which is now the lower side. Portrait orientation is not allowed with the opposite side facing
down.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
23
Installation
Non-Portrait Mode
•
The projector is in non-portrait mode when the viewing angle is 240° to 300° as illustrated
below.
•
The "orange" status LED on projector lights on.
Warning! The projector should not be operated in Non-Portrait Mode.
Portrait cover installation
1. Attach the Portrait cover to the left side of the projector and secure with six M3 screws.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
24
Installation
2. Mount the projector in an appropriate mounting kit, using the 4 mounting points on the
underside of the projector.
Warning!
• Mount with the portrait cover side facing downwards.
• The projector must not stand on a table top on the portrait cover.
Calculating the lens offset
Adjust the offset to align the image on the screen with full image size.
•
The vertical image offset (shift) ranges for the projector are +/-100% (WUXGA) and +/-120%
(HD).
•
The horizontal image offset (shift) range for the projector are +/-30% (HD/WUXGA).
•
The method for calculating lens offset complies with industry standards. For example for
Vertical lens offset:
•
At 0% offset (or on axis), the center of the image is on the lens center, so half of the
image appears above and half appears below the lens center.
•
At +100% offset, all (or 100%) of the image will appear above the lens center.
•
The percentage (%) offset is calculated as the ratio of the number of pixels shifted up or
down to full image size. For example for WUXGA:
•
Shifting up 600 pixels gives an offset of 600/1200 * 100% = 50%
•
Shifting down 600 pixels gives an offset of -600/1200 * 100% = -50%
•
Shifting up 720 pixels gives an offset of 720/1200 * 100% = 60%
•
Shifting up 240 pixels gives an offset of 240/1200 * 100% = 20%
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
25
Installation
WUXGA projectors
The following show vertical image offsets for the WUXGA projectors:
•
Vertical image offset: 0%
No offset is applied - 0% offset.
Half of the image appears above lens center
and half of the image appears below lens
center.
600 pixels
above lens
center.
Lens center
600 pixels
below lens
center.
•
Vertical image offset: 100%
Image has been offset 600 pixels above lens
center, so the center of the image is now 600
pixels above where the center of the image was
at 0% offset (or lens center).
The offset is
+600/600 * 100% = +100%.
600 pixels
of shift
above lens
center.
Lens center
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
26
Installation
•
Vertical image offset: -100%
Image has been offset 600 pixels below lens
center, so the image has an offset of
-600/600 * 100% = -100%
Lens center
600 pixels
of shift
above lens
center.
Total of
1200 pixels
(600+600)
of display
are below
lens center.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
27
Installation
HD Projectors:
The following show vertical and horizontal image offset for HD projectors:
•
Vertical image offset: 0%
No offset is applied - 0% offset.
Half of the image appears above lens center
and half of the image appears below lens
center.
540 pixels
above lens
center.
Lens center
540 pixels
below lens
center.
•
Vertical image offset: 120%
Image has been offset 648 pixels above lens
center, so the center of the image is now 648
pixels above where the center of the image was
at 0% offset (or lens center).
The offset is
+648/540 * 100% = +120%.
648 pixels
of shift
above lens
center.
Lens center
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
28
Installation
•
Vertical image offset: -120%
Image has been offset 648 pixels below lens
center, so the image has an offset of
-648/540 * 100% = -120%
Lens center
648 pixels
of shift
above lens
center.
Total of
1296 pixels
(648+648)
of display
are below
lens center.
•
Horizontal image offset: +/-30%
1920%
+192%
Lens center
-192%
Image has been offset 192 pixels
left or right of lens center.
The image has an offset of
+192/960 * 100% = +20%, or
-192/960 * 100% = -20%
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
29
Installation
Removing and installing the lens
Warning! Failure to comply with the following could result in death or serious injury.
• Turn off the projector and remove the power cord, before installing or replacing a lens.
1. Center the lens: Ensure that the lens is at or near its center position. Attempting to remove
the lens when at a large offset may cause damage to the lens assembly. Center the lens while
the projector is switched on by pressing the lens horizontal or vertical button and then pressing
Enter.
2. Turn Off the projector: Turn the projector OFF.
3. Wait for projector to cool down: Allow the projector to cool down into standby mode before
replacing the lens. Remove power cord after the projector has cooled down and prior to
replacing the lens.
4. Remove the lens: Remove the lens ring cover. Rotate the lens counter-clockwise by a quarter
to release the lock. Remove the lens through the front of the projector.
5. Install the new lens: Fully insert the lens assembly straight into the lens mount without
turning. Rotate the lens cap clockwise to lock the lens in place.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
30
Installation
Installing the cable cover
1. Rotate the cable cover and insert the two guide pins into the guide holes.
2. Press and hold both lower corners of the cable cover while inserting the sheet clips into the
projector casing.
Guide Pin
Guide Hole
Hold and Press Here
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
31
Installation
Installing the ceiling mount
Mount the projector with a Christie-approved mount (such as the Christie One Mount, P/N: aaa
108-506102-XX), using the four mounting points on the underside of the projector.
1. Refer to the installation instructions and safety guidelines provided in the kit (such as the
Christie One Mount, P/N: 108-506102-XX).
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
32
Operation
The projector has multilingual on-screen display (OSD) menus so you can make image adjustments
and change a variety of settings.
Most of the projector controls are accessed from within the projector menu system. Several groups of
related functions are selectable from the Main Menu as shown below.
•
To display the Main Menu, on the IR remote keypad or on the built-in keypad on the rear of the
projector, press MENU.
•
To navigate within the menu and adjust a setting up or down, use the arrow keys.
•
To select a highlighted menu item or use it to change or accept a value, press ENTER.
You can then select the next item that you want to adjust in the menu and adjust it.
•
To return to the previous menu or exit menus if at top level, press EXIT.
Main Menu
1. Size & Position
2. Image Settings
3. Configuration
4. Light Source
5. Status
6. Input Switching & PIP
7. Language
English
8. Test Pattern
Off
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
33
Operation
Size and Position menu
The Size and Position menu determines the size and position of the image on the screen.
Size & Position
1. Size Presets
Auto
2. Overscan
Off
3. Pixel Track
4. Pixel Phase
5. Horz Position
6. Vert Position
7. Digital Horz Zoom
8. Digital Vert Zoom
9. Digital Horz Shift
10. Digital Vert Shift
11. Geometry Correction
Off
12. Auto Image
Menu item
Description
Size Presets
Displays an image with the detected size, or
resizes the image by maximizing either the
height, width, both, or resizes to the maximum
size possible while keeping the original aspect
ratio.
Options
• Auto—Displays with the detected size.
• Native—Displays in its native resolution.
• 4:3—Retains 4:3 aspect ratio.
• Letterbox—Make the active content enlarge
to the full screen.
• Full Size—Fills the screen (regardless of the
source).
• Full Width—Fills display width and keep
aspect ratio.
• Full Height—Fills display height and keep
aspect ratio.
• Custom—Stretches the display horizontally
or vertically without cutting the image
display.
Overscan
Removes noise around the image.
Pixel Track
Steady flickering or several soft vertical stripes
or bands across the entire image indicates poor
pixel tracking. Proper pixel tracking ensures that
the image quality is consistent across the
screen, the aspect ratio is maintained, and that
the pixel phase can be optimized. (Analog RGB
signals only.)
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
• Overscan Zoom enlarges image 6% from
the original size.
34
Operation
Menu item
Description
Pixel Phase
Adjust the pixel phase when the image shows
shimmer or noise after pixel tracking is
optimized. Pixel phase can adjust the phase of
the pixel-sampling clock relative to the incoming
signal. (Analog RGB signals only.)
Horz Position
Moves the image right or left within the area of
available pixels.
Vert Position
Moves the image up or down within the area of
available pixels.
Digital Horz
Zoom
Changes the size of projector's display area
horizontally. If the display area has been resized
by this setting, it can be moved by changing the
Digital Horz Shift and Digital Vert Shift settings.
Digital Vert
Zoom
Changes the size of projector's display area
vertically. If the display area has been resized by
this setting, it can be moved by changing the
Digital Horz Shift and Digital Vert Shift settings.
Digital Horz
Shift
Moves the display area horizontally if its size has
been changed by the Digital Zoom setting.
Digital Vert
Shift
Moves the display area vertically if its size has
been changed by the Digital Zoom setting.
Geometry
Correction
Provides several ways for warping control.
For more information on geometry correction,
see Geometry correction on page 36.
Options
• Off—No Geometric correction is applied to
the image.
• Horz Keystone—Adjusts the keystone
horizontally and make a more square
image
• Vert Keystone—Adjusts the keystone
vertically and make a more square image.
• Horz Pincushion—Adjusts the pincushion
horizontally and make a more square
image.
• Vert Pincushion—Adjusts the pincushion
vertically and make a more square image.
• Pincushion/Barrel—Allows for correction for
slight curved distortion from the lens or
projection surface.
• 4-Corner—Allows the image to be squeezed
to fit an area defined by moving each of the
four corners’ x and y position.
• Curve—Allows to modify individually the
four sides of the projected image.
• Rotation—Allows an image to be rotated –
most commonly to level the image.
Auto Image
Forces the projector to reacquire and lock to the
input signal. This is useful when signal quality is
marginal.
• Normal mode—Supports all of the 4:3 input
sources.
• Wide mode—Supports all of the 16:9 input
source and most of the 4:3 input source.
For the 4:3 input sources not recognized by
Wide mode (for example, 1400 x 1050),
perform Auto Image using Normal mode.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
35
Operation
Geometry correction
The "Geometry Correction" can be controlled with the options in the drop-down list:"Off/Basic"
when optional Dual Processor Warp Module is not installed, and "Off/Basic/Curve/Rotate" when
optional Dual Processor Warp Module is installed.
The following table provides information about the geometry correction feature compatibility:
Warp Function
4-Corner
Keystone
Pincushion
Pincushion
and Barrel
Rotation
4-Corner
--




Curved Surface(2x2)

--
X
X
X
Keystone

X
--

X
Pincushion and Barrel

X

--
X
Pincushion

X
X
X
--
Horz Keystone
Adjust the keystone horizontally and make a more square image. Horizontal keystone is used to
correct a keystoned image shape in which the left and right borders of the image are unequal in
length, and the top and bottom are slanted to one of the sides. This is intended for use with
horizontally on-axis applications. For horizontally offset applications, you must use 4-Corner
correction using the optional Dual Processor Warp Module.
B
B
A
Ind.
1080P
A
10.00%
WUXGA
7.20%
B
6.50%
5.30%
A
Vert Keystone
Adjust the keystone vertically and make a more square image. Vertical keystone is used to correct
a keystoned image shape in which the left and right borders of the image are unequal in length, and
the top and bottom are slanted to one of the sides. This is intended when for use with horizontally
on-axis applications. For horizontally offset images, you must use 4-Corner correction using the
optional Dual Processor Warp Module.
A
B
B
Ind.
1080P
A
4.40%
WUXGA
3.41%
B
8.93%
5.46%
A
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
36
Operation
Horz Pincushion
Adjust the pincushion horizontally and make the image more square.
Ind.
A
1080P
WUXGA
A
10.90%
6.40%
B
10.90%
6.50%
B
Vert Pincushion
Adjust the pincushion vertically and make the image more square.
A
B
Ind.
1080P
A
10.00%
WUXGA
9.30%
B
10.00%
9.30%
Pincushion/Barrel
Allow for correction for slight curved distortion from the lens or projection surface.
A
B
C
D
Ind.
1080P
A
8.61%
WUXGA
8.44%
B
4.16%
4.66%
C
6.50%
6.60%
D
6.60%
6.60%
4-Corner
Allow the image to be squeezed to fit an area defined by moving each of the four corners’ x and y
position.
A
A
B
B
Ind.
B
1080P
WUXGA
A
7.30%
7.30%
B
7.40%
6.70%
B
A
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
A
37
Operation
Curve
Modify individually the right arc, left arc, top arc, and bottom arc to correct the curved distortion
from the lens or projection surface.
Ind.
A
1080P
WUXGA
A
10.90%
6.40%
B
10.90%
6.50%
B
Rotation
Allow an image to be rotated – most commonly to level the image. While the image is rotated, the
software can crop any content that begins to fall off the panel. The function will not automatically
scale the image down to prevent cropping. If scaling is required, the digital zoom function can be
used, independently of the rotation function.
A
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
Ind.
1080P
WUXGA
A
±7.9°
±7.9°
38
Operation
Image Settings menu
The Image Settings menu sets the brightness, contrast, and other settings for images.
Image Settings
1. Brightness
2. Contrast
3. Color Space
Auto
4. Detail
Normal
5. Video Options
6. Input Levels
7. Picture Settings
Video
8. Save to User
9. Image Freeze
10. Advanced Image Settings
Menu item
Description
Options
Brightness
Adjusts the intensity of the image.
—
Contrast
Adjusts the degree of difference between the
lightest and darkest parts of the image and
changes the amount of black and white in the
image.
—
Color Space
Selects a color space specifically tuned for the
input signal. Only useful for analog signals and
certain digital sources.
—
Detail
Selects the edge clarity of the image.
—
Video Options
Applies only to video sources.
• Color—Adjusts a video image from black
and white to fully saturated color. The color
setting applies to video sources only.
• Tint—Adjusts the red-green color balance
in the image of NTSC video images. The
tint setting applies to NTSC video sources
only.
• Noise Reduction—Reduces temporal or
spatial noise in the image.
• Flesh Tone Correction—Controls the
amount of flesh tone correction applied to
the image.
• Video Black Level—Analyzes the current
input image and calculate an offset value
which is then added to the analog to digital
converter black level value. This ensures
optimum black level for each analog
source.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
39
Operation
Menu item
Description
Video Options
Options
• Detect Film—Controls film mode detection
and determine whether the original source
of the input video was film or video.
(continue)
• Closed Captions—Controls closed caption
display while audio is not muted. If this
setting is not off, audio is not muted, the
source is NTSC and contains captions on
the selected channel, then the projector
must display caption text overlaid on the
image.
Input Levels
Applies to VGA or component signals only.
• Gain—Adjusts the gain of the red, green, or
blue channel of the image. It affects the
black and white.
• Offset—Adjusts the offset of the red,
green, or blue channel of the image. It
affects the black and white.
• Sync Threshold—Helps to sync when
connecting to the projector, if a hardware
device, such as a DVD player, is not
syncing properly with the projector.
(Progressive signals only.)
Picture Settings
Optimizes the projector for displaying images
under certain conditions, such as:
• Presentation
—
• Video
• Bright
• Real
• DICOM SIM
• Blending
• User
It affects the following:
• Gamma
• Sharpness
• White Peaking
• Overscan
• Brightness
• Contrast
• Color
• Tint
• Red Gain
• Green Gain
• Blue Gain
• Red Offset
• Green Offset
• Blue Offset
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
40
Operation
Menu item
Save to User
Description
Options
Saves the user settings.
—
Adjust the image settings and Select Save to
User as a picture setting. To recall these settings
in the future, select the User in the Picture
Settings menu.
You can save the following settings:
• Brightness
• Contrast
• Color
• Tint
• Red Gain
• Green Gain
• Blue Gain
• Red Offset
• Green Offset
• Blue Offset
• Color Temperature
• Gamma
• Detail
• White Peaking
• Overscan
Image Freeze
Pauses the screen image.
Advanced
Image Settings
Provides access to advanced image settings such
as gamma, white peaking, and so on.
—
• Gamma—Selects the appropriate gamma
from Video, Film, Bright, CRT, and DICOM.
• White Peaking—Increases the brightness of
whites near 100%. (Video source only.)
• Color Temperature—Changes the intensity
of the colors. Select a listed relative
warmth value.
• Edge Enhancement—Applies the edge
enhancement process.
• Color Enhancement—The Color
Enhancement control can improve the
picture quality of pictures with a high
saturation of color.
• Christie RealBlack—Allows displaying black
with a high contrast ratio 750,000:1.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
41
Operation
Configuration Menu
The Configuration menu sets the language, projection orientation, power usage, and other
preferences for the projector.
Configuration
1. Language
English
2. Lens Settings
3. Ceiling Mount
Auto
4. Rear Projection
5. Menu Preferences
6. Power Management
7. High Altitude
8. IR Control
9. LED Indicator
10. Communications
11. Image Blending
12. Color Matching
13. Hot-Key Settings
14. Service
Menu item
Description
Language
Selects an available language
for the on-screen display.
Options
• English
• French
• German
• Italian
• Spanish
• Chinese (Simplified)
• Japanese
• Korean
• Russian
Lens Settings
Adjusts the lens.
• Focus and Zoom—Adjusts the focus and zoom the image in
or out.
• Lens Shift—Shifts the lens up and down, or left and right.
• Lock all Lens Motors—Selects this function to prevent all lens
motors from moving. It will disable the Zoom, Focus,
Horizontal and Vertical Position settings, effectively locking
out any changes and overriding all other lens features. This
is particularly useful to prevent accidental lens position
changes in multi-projector installations.
• Lens Calibration—Calibrates the lens center.
Ceiling Mount
Turns the image upside down
for ceiling-mounted
projection.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
—
42
Operation
Menu item
Description
Options
Rear Projection
Reverse the image so you can
project from behind a
translucent screen.
—
Menu
Preferences
Sets the on-screen display
menu preferences, and the
password for the projector.
• Menu Horz Offset—Changes the horizontal position of the onscreen display.
• Menu Vert Offset—Changes the vertical position of the
on-screen display.
• Show Messages—Displays status messages on the screen.
• Menu Transparency—Changes the on-screen display menu
background to be transparent.
As the value increases, more of the image behind the menu
is visible.
• Splash Screen Setup—Selects the splash screen.
• PIN Protect—Protects your projector with a password. Once
enabled, you must enter the password before you can
project an image.
• Change PIN—Allows you to change the password.
Power
Management
Determines the power modes
for the projector.
• Standby Mode—Determines if the projector is in standby
mode when connected to AC power (<0.5 W).
• AC Power On—Automatically turns the projector on when
electrical power is connected.
• Auto Shutdown—Automatically turns the projector off after
no signals are detected for a preset number of minutes. If an
active signal is received before the projector powers down,
the image is displayed.
• Sleep Timer—Allows the projector to automatically power off
after it has been on for a specified amount of time (two, four,
or six hours).
High Altitude
Enables or disables high
altitude mode.
• On—Enables high altitude mode for altitudes >/= 2000 m.
The fan operates at high speed to ensure sufficient air flow
for high altitudes.
• Off—Disables high altitude mode. For altitudes below 2000
m.
IR Control
Enable or disable IR control.
—
LED Indicator
Enable or disable displaying
status LED and keypad LED.
—
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
43
Operation
Menu item
Description
Options
Communications
Determines the
communication settings such
as network setup, serial port
information, and so on.
LAN:Configure the local area network (LAN) settings.
• DHCP—Turns the DHCP on or off.
• IP Address—Assigns the network IP address.
• Subnet Mask—Assign Network Subnet Mask
• Default Gateway—Assigns the network default gateway.
• MAC Address—Displays the network MAC address value.
WLAN: Configure the wireless local area network (WLAN)
settings.
• Enable: Enable/Disable WLAN.
• Start IP: Start of IP Address.
• End IP: End of IP Address.
• Subnet Mask—Assign Network Subnet Mask
• Default Gateway: Assign Network Default Gateway.
• MAC Address: Display network MAC Address value.
• SSID: Assign Network Service Set Identifier.
Network: Configure the general network settings.
• Projector Name: Display the projector hostname for
Network.
• Show Network Messages: Enable or disable to display of the
network message.
• Restart Network...—Restarts the network.
• Network Factory Reset...—Restart the network and set the
projector name, LAN, and WLAN configuration to the default
values. For the details, refer to "Network".
Serial Port Baud Rate—Selects the serial port and baud rate.
Serial Port Echo—Controls whether the serial port echoes
characters.
Serial Port Path—Sets the serial port path to RS232 or
HDBaseT.
Projector Address—Sets the projector address (0 to 9). The
projector responds to the IR remote set to the same address as
the projector or to the IR remote set to address 0.
Image Blending
Adjusts blend widths and
settings to left, right, top
and/or bottom sides to create
a seamless multi-projector
stitched image.
—
For more information on color
matching, see Image
blending on page 47.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
44
Operation
Menu item
Description
Color Matching
Enables the selected method
(Manual Adjustment or HSG)
to define the precise hue of
each primary color
component (red, green, blue
and white).
Options
• Manual Adjustment—Manually defines the precise hue of
each primary color component.
• HSG Adjustment—Adjusts the hue, saturation, and gain
(HSG) of the projected image. The HSG function
independently controls each of the color regions R, G, B, C,
M, Y, and W.
When one method is enabled,
the other method is
automatically disabled. For
both methods, if Auto Test
Pattern is enabled, the solid
colored test pattern can be
displayed according to the
menu item on which you are
positioned.
For more information on color
matching, see Color
matching on page 48.
Hot-Key Settings
Assigns a different function to
the hot key on the IR remote
keypad by highlighting the
function in the list and
pressing ENTER.
—
Choose a function that does
not already have a dedicated
button, and assign the hot
key to that function, allowing
you to quickly and easily use
the chosen function.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
45
Operation
Menu item
Description
Service
Displays projector
information, sets test
patterns, error logs, and high
temperature warnings.
Options
• Projector Info—Displays the current projector settings.
(Read-only)
• Factory Reset...—Restores all settings to their default value.
It does not reset network but it resets RS232.
• Test Pattern—Sets the required internal test pattern to
display. To turn off a test pattern, select Off.
• Phosphor Index—Phosphor index are to make the phosphor
wheel, filter wheel & DMD synchronized. The index is to
define how long should be delayed according to DMD. When
adjust the Phosphor index, it will impact R/G/B gray level
smoothly and contouring.
• Filter Index—Filter index are to make the phosphor wheel,
filter wheel & DMD synchronized. The index is to define how
long should be delayed according to DMD. When adjust the
filter index, it will make the white color space more smooth
without contouring, very similar to phosphor index behavior.
• Error log—Shows the projector error log for debug.
• Mode Adjustment—Fine tunes the horizontal (H) and vertical
(V) start position for a signal in the EDID timing table and
record the values in the system to override the timing table.
To keep the settings, before exiting the menu, select Saved
to Record. To revert to original timing table settings,
manually clear each setting. Factory Defaults do not clear
these override settings.
• Laser Diode Info—Displays the current laser banks status
and temperature information.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
46
Operation
Image blending
Adjust blend widths and settings to left, right, top and/or bottom sides to create a seamless multiprojector stitched image. (Available only when optional Dual Processor Warp Module is installed.)
What is a Blend?
In simple terms, a blend appears as a gradient strip along an edge of a projected image. It is
darkest along the extreme edge of the image, and lightens nearer to the rest of the image (see
below).
Blend
How are Blends used?
In multiple-projector wall, complementary blends between neighboring images can compensate for
the extra “brightness” or intensity where these edges overlap. By controlling blend width and other
properties, you can achieve uniformity across the group of images. Visible overlaps will disappear,
as shown below.
Overlap
Proj. 1,1
Overlap
Proj. 1,2
Image
Proj. 2,1
Proj. 2,2
With edge blending:
Blend
Proj. 1,1
Proj. 1,2
Image
Proj. 2,1
Blend
Proj. 2,2
Blending regions can be defined on all sides – left, right, top and bottom. The same gamma curve is
used for all blending regions.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
47
Operation
Color matching
You may require a unique color gamut (range) for a single projector or application, or you may need
to precisely match colors across multiple adjacent displays. Use color matching by Manual
Adjustment or HSG to define the precise hue of each primary color component (red, green, blue and
white).
HSG
Hue, Saturation, and Gain (HSG) software controls the color regions R, G, B, C, M, Y, and W
independently.
1. Select HSG, select Color Matching > HSG Adjustment.
Hue
Note the following about adjusting hue:
•
Adjust the hue independently for each color (R,G,B,C,M, and Y).
•
White does not have a hue input.
•
A negative hue input provides a clockwise rotation of the color's hue.
•
A positive hue input provides a counter-clockwise rotation of the color's hue.
•
A zero input does not change the hue of the color.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
48
Operation
Saturation
Note the following about adjusting saturation:
•
The saturation can be adjusted independently for each color (R,G,B,C,M, and Y).
•
A saturation level of 0 removes all color from that region.
•
A saturation level of 254 sets the color region to have maximum color.
•
A saturation level of 127 does not change the saturation.
Gain
Note the following about adjusting gain:
•
The gain can be adjusted independently for each color (R,G,B,C,M,Y, and W).
•
The range of input is 0 to 254.
•
The gain changes the intensity level of the respective color.
•
A gain level of 127 disables the HSG controls for that color.
•
A gain level less than 127 darkens the respective color.
•
A gain level of 254 sets the color region to have maximum gain; however, clipping occurs on
the signal.
•
A gain of 127 is the nominal setting.
•
White provides three gain level controls, one each for the R,G,B component of white.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
49
Operation
Light Source menu
The Light Source menu sets the light source mode and power preferences.
Light Source
1. Light Source Mode
Constant Power
2. Constant Power
405
3. Constant Intensity
4. Total Projector Hours
5. Light Sensor
Menu item
Description
Light Source
Mode
Sets the light source mode.
Options
• Constant Power
• Constant Intensity
• ECO mode
Constant Power
Sets the value of the laser diode power.
—
Constant
Intensity
Sets the value for the Constant Intensity
mode to maintain constant brightness.
—
The light sensor will monitor the light level
and will apply more power as the laser
brightness decays naturally over time. When
the laser setting reaches maximum power of
405W, it will remain at this setting. Note that
the light sensor needs to be calibrated for
Constant Intensity mode to work properly.
Calibration should be performed again after
every laser diode change.
Total Projector
Hours
Displays the current total number of hours the
projector has been used.
—
Light Sensor
Calibrates the light sensor.
—
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
50
Operation
Status menu
The read-only Status menu lists a variety of details about the standard and optional components
currently detected in the projector.
For DHD models
Status
Model Name
DHD599-GS
Serial Number
Native Resolution
Firmware
Main Input
Main Signal Format
Main Pixel Clock
Main Sync Type
Sync On Green
Main Horz Refresh
Main Vert Refresh
PIP/PBP Input
PIP/PBP Signal Format
PIP/PBP Pixel Clock
PIP/PBP Sync Type
PIP/PBP Horz Refresh
PIP/PBP Vert Refresh
Light Source Power
Total Projector Hours
Standby Mode
0.5 W Mode
Lens Lock Settings
Allow
IP Address
DHCP
No
System Temperature
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
51
Operation
For DWU models
Status
Model Name
DWU599-GS
Serial Number
Native Resolution
Firmware
Main Input
Main Signal Format
Main Pixel Clock
Main Sync Type
Sync On Green
Main Horz Refresh
Main Vert Refresh
PIP/PBP Input
PIP/PBP Signal Format
PIP/PBP Pixel Clock
PIP/PBP Sync Type
PIP/PBP Horz Refresh
PIP/PBP Vert Refresh
Light Source Power
Total Projector Hours
Standby Mode
0.5 W Mode
Lens Lock Settings
Allow
IP Address
DHCP
No
System Temperature
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
52
Operation
Input Switching & PIP menu
The Input Switching & PIP menu determines how the main and PIP/PBP inputs are handled.
Input Switching & PIP
1. Main Input
2. PIP/PBP Input
3. PIP/PBP Enable
4. Swap
5. Size
Medium
6. Main Layout
Top Right
7. Timing Detection Mode
Wide
8. Source Info
9. Enable Source Hot-Key
10. Source Hot-Key
11. Input Key
Auto Source
12. Blank on Signal Switch
Menu item
Description
Options
Main Input
Selects an active input to be used as the main
image.
—
PIP/PBP Input
Selects an active input to be used as the PIP/
PBP.
—
PIP/PBP Enable
Toggles between displaying two sources at
once (main and PIP/PBP images) or one
source only.
Refer to Inputs on page 79 and PIP/PBP
compatibility on page 83.
Swap
Changes the main image to PIP/PBP, and the
PIP/PBP to main image.
• Selected checkbox—Turns the PIP/PBP
source on.
• Cleared checkbox—Turns the PIP/PBP source
off.
—
Swapping is available only when PIP/PBP is
enabled.
Size
Selects the PIP/PBP size to small, medium, or
large.
—
Main Layout
Sets the location of the PIP/PBP image on the
screen.
—
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
53
Operation
Menu item
Description
Options
Timing Detection
Mode
Sets timing detection mode to wide or normal
to support additional PC timings. When the
projected picture is not completed, this
function is used to adjust the picture.
• Normal mode—Supports 4:3 input sources.
• Wide mode—Supports the 16:9 input source
and most 4:3 input sources.
For 4:3 input sources not recognized by Wide
mode (for example 1400 x 1050), perform
Auto Image using Normal mode.
Source Info
Displays the current source settings. (Readonly)
—
Enable Source
Hot-Key
Toggles the check box to enable or disable the
main source hot-key.
—
Source Hot-Key
Allows you to assign a different source to the
hot-key. Highlight an input and press ENTER
to choose a different one.
—
Input Key
Lists or changes the sources.
—
Blank on Signal
Switch
Blanks the screen before timing is stable when
changing the source.
• Off—Disables blanking the screen.
• On—Blanks the screen before timing is
stable when changing source.
PIP/PBP layout and size
A P indicates the primary source region (lighter color) and an asterisk (*) indicates both regions are
the same size.
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
PBP, Main Left
P
P
PBP, Main Top
P
P
P
P
*
*
PBP, Main Right
P
P
P
*
PBP, Main Bottom
P
P
PIP-Bottom Right
P
P
P
PIP-Bottom Left
P
P
P
P
P
P
P
*
PIP-Top Left
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
54
Operation
PIP/PBP Layout
PIP/PBP Size
Small
Medium
Large
PIP-Top Right
P
P
P
Language menu
Select an available language for the on-screen display.
Language
Test Pattern menu
Choose the required internal test pattern to display, or select Off to turn off a test pattern.
Test Pattern
1. Off
2. Grid
3. White
4. Black
5. Checkerboard
6. Color Bars
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
55
Operation
Web user interface
The web user interface provides an alternate way to access the menu functionality on the projector.
Logging on to the web user interface
Log onto the web user interface by following the steps below.
1. Open a web browser and type the IP address (in the address bar) assigned to your projector.
2. From the Access type list, select the log in level.
3. In the Password field, type the password.
4. From the Language list, select the appropriate language.
5. To access the Main window, click Login.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
56
Operation
Main tab–General
Displays information about the projector, its power status, and what is selected for the main and
PIP/PBP input sources.
Panel
Description
Control
Selects main source/PIP source, enables or disables PIP/PBP, changes the layout or PIP size,
swap, and change the test pattern.
Projector
Information
Check the projector information for power status, Pic mute status, on-screen display status, IP
address, and MAC address.
Switch
Switches the on or off status of Power, Pic Mute, and on-screen display.
Main tab–Status
Displays the current status of light source, cooling (fans), version numbers and signal (source)
information.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
57
Operation
Main tab–Lens
Controls the focus, lens shift, and zoom adjustments for the lens.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
58
Operation
Network
If you change a setting, the network subsystem of the projector may restart, and you may be
logged off.
Panel
Description
Restart
Network
Execute a network restart. This does not change any of the network settings.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
59
Operation
Panel
Description
Network
Factory Reset
Execute a network factory reset. Network settings may be reset to the following default values.
Projector Name = [email protected] + Serial Number
Show Network Messages = ON
LAN settings:
• Manual
• IP Address = 192.168.0.100
• = 255.255.255.0
• Default Gateway = 192.168.0.100
WLAN settings:
• Enabled
• Start IP = 192.168.1.100
• End IP = 192.168.1.120
• = 255.255.255.0
• Default Gateway = 192.168.1.100
SNMP settings:
• SNMP Read Community = private
• Trap IP Address = 0.0.0.0
• SMTP IP Address = 0.0.0.0
• All other settings are cleared or blanked
Trap Configuration:
• All items = SNMP Trap + Email
LAN Setting
Panel
• Sets if the projector must obtain an automatically assigned IP address through DHCP or if the
user sets the address manually.
• For the TCP/IP setting, enter the IP address, netmask, and default gateway address.
WLAN Setting
Panel
• Enables or disables the wireless LAN of the projector.
• Enter the IP address range, netmask, and default gateway for the wireless LAN.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
60
Operation
Panel
Description
SNMP Panel
Provides network administrators with a common way to manage their network devices from a
single remote location. Administrators can use the Simple Network Management Protocol (SNMP)
interface to query a number of devices to see their current status or configuration. Operators can
change configuration values and configure trap notifications to be sent when certain events occur
(for example, loss of signal, power state change, and so on).
Emails are sent to the mail server configured in the projector settings. Up to two user email
accounts can be selected. Important information regarding the event is located in the body
content of the email.
SNMP Traps are notifications that are sent from the projector. They are only received by a trap
receiver (MIB Browser) in the computer.
• SNMP Read Community (default setting: private)—Plain text password that must also be
entered in the MIB browser. This password allows various settings in the projector to be
queried.
• SNMP Location (default setting: blank)—Use as a description to where a projector is located in
a building. SNMP emails sent specify this location.
• Trap IP Address (default setting: 0.0.0.0)—Fill in this field with the IP address of the computer,
on which you want to view received traps from the projector.
• Trap Email 1/2 (default setting: Blank)—Set the Trap Email 1 and 2 to an email address
configured under the mail server entered in the SMTP Server IP Address field.
• Email from Address (default setting: blank)—Set the name of the source of the SNMP emails.
• SMTP Server IP Address (default setting: 0.0.0.0)—Enter the IP address of the mail server.
Trap
Configuration
Panel
Set the SNMP actions for the system events. The options are:
• SNMP Trap
• + Email
• Email
• SNMP Trap
• Disabled
Crestron
Control System
Panel
Enter the IP address, IP ID, and port of Crestron device for the connection.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
61
Operation
Tools
Use the Tools pages to control size & position, image settings, configuration, light source, input
switching, PIP, and test patterns.
Administrator Page
Add or delete a user or change password.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
62
Operation
About Page
The About page provides version and license information about GS Series.
Tab
Description
Version
Views the main firmware version, network firmware version, projector model name, and
projector serial number.
License
Displays the license information of the computer program.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
63
Operation
Christie Presenter
The Christie Presenter application allows a remote desktop from a host PC to be displayed on the
network display through Ethernet or wireless transports. It can adapt to different network settings
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie website or from the web page of the projector.
Connecting to the Projector
Before using Christie Presenter, you must connect to the projector.
1. Connect to the projector using WiFi or Ethernet.
Ethernet connection:
a. To determine the projector's IP address, select Main Menu > Configuration >
Communications > LAN.
LAN
1. DHCP
2. IP Address
3. Subnet Mask
4. Default Gateway
5. MAC Address
b. Configure your PC IP address to be on the same network as the projector.
c. The projector and computer must be connected directly or over the network using
Ethernet.
WiFi Wireless connection:
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input
panel.
For more information about the WiFi USB dongle, see page 85.
HDBaseT
REMOTE
IN
REMOTE
OUT
HDMI IN
VGA IN
VGA OUT
DISPLAY PORT IN
DVI IN
MINI USB
GREEN/Y
BLUE/PB
RED/PR
RS232
USB
ETHERNET
CVBS
S-VIDEO
K
b. Power on the projector.
c. Obtain the WiFi SSID from Main Menu > Configuration > Communications > WLAN.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
64
Operation
d. Connect your PC device to the wireless SSID for the selected projector, for example:
[email protected]
Installing the Christie Presenter software
Install and configure the Christie Presenter software.
1. In a web browser, connect to the projector's network address.
The default address is 192.168.1.100.
2. Download and install the Christie Presenter software.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
65
Operation
3. Configure the Christie Presenter software.
The name entered identifies all computers connected to the projector by the Christie Presenter
software—either wired or wireless connections. The Network Display Management > Device
Management tab shows all current connections.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
66
Operation
Using the Christie Presenter
1. To pause or play the USB display, in the system tray, press Autorun.
After starting the Christie Presenter application, the main window appears.
Icon
Description
Connects and searches the network display.
Stops or starts displaying desktop contents to the connected network display.
Selects a display region.
Configures Christie Presenter.
Manages all connected network displays.
Disconnects all connections.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
67
Operation
Connecting and searching the network display
1. To enter into the connection menu section, click
.
2. If the IP address of the projector is known, type the IP address and click Connect.
3. If the IP address is not known:
a. To search for the projector on the network, click Search.
b. Select the projector to which you want to connect.
c. To access the Login dialog, click Connect directly.
4. In the Login dialog, select the user type and type the password.
The default password for the Normal user is left blank. If the password was previously set, it
appears in the bottom-left corner of the on-screen display. The default password for the Admin
user is admin.
5. In the Select display port window, select the display port.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
68
Operation
Selecting the display region
When the connection is set up, you must select the display region.
1. To select the size of the projection region, click
and select an option: FullScreen,
FixedSize, or Alterable.
Tab
Description
FullScreen
Turns the default capture mode to full screen when the program is launched. If screen capture
starts, the image of the entire screen is transferred to a remote network display.
FixedSize
Transfers on the image enclosed inside the frame (after a user places a frame on the desktop) to
remote network display.
Alterable
Encloses only the captured region by the frame. To enlarge or downsize the region, drag the eight
small black squares scattered on eight edges of the frame.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
69
Operation
Configuring Christie Presenter
Set the language for Christie Presenter, the region size of fixed size capture mode, if a notification
message dialog is allowed, the quality of JPEG images, YUV sample formats, and the network port
setting.
1. To configure Christie Presenter for basic and advanced settings, click
.
Tab
Description
Basic Setting
Selects the language, changes the region size of fixed size capture mode, and selects if a
notification message dialog is allowed.
Advanced
Setting
Selects the quality of JPEG image, YUV sample formats and the network port setting. The fixed port
is port 5900.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
70
Operation
Managing all connected network displays
You can manage all connected network displays and users at the same time.
1. To control all users connected to the same projector, click
Icon
.
Description
Indicates the administrator is logged in.
Indicates a normal user logged in.
Indicates the device is connected.
Indicates the device is not connected.
Shows the current status and display position of the local screen on the network display. Click to
change the display position. A dialog appears.
Changes the password to the target network display. Only an Administrator user can change the
password.
Does not require a response. If user logs in as Admin, the key icon is displayed and the
Presenter password can be changed. If user log in as Normal, the lock icon is displayed and the
Presenter password cannot be changed.
Disconnects from the target network display.
Connects to a target network display using a web page.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
71
Operation
Operating the card reader
The Card Reader application has four available operation modes:
•
USB Flash Devices Detection screen
•
Thumbnail Display mode
•
Images Display mode
•
Images Slide Show mode
USB Flash Device Detection screen
In this mode, the Card Reader application detects any USB flash devices hot-plug events and
displays the flash device icon. When the flash device is removed from USB, the icon disappears.
Christie recommends removing the USB flash devices only when the Card Reader is changed to the
USB Flash Devices Detection Screen state.
Thumbnail Display mode
1. To access the Thumbnail Display mode, press the ENTER.
Different photos in different folders can be chosen.
2. To access the Card Reader operation UI, press MENU.
3. Operate the Card Reader application with the Enter, Left, Right, Up, and Down keys.
The following buttons are supported in the user interface:
Button
Description
Previous
Moves the selected item left or goes to previous page when this is the left-most item.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
72
Operation
Button
Description
Next
Moves the selected item right or goes to next page when this is the right most item.
Display
Displays the selected image or folder.
Thumbnail
Enter the Thumbnail Display mode.
SlideShow
Enter the Slide Show mode.
NameOrder
Sorts files and folders by name.
ExtendOrder
Sorts files and folders by extended order.
SizeOrder
Sorts files and folders by size.
TimeOrder
Sorts files and folders by time.
EXIF ON/OFF
Enables or disables the auto image rotate accordingly to EXIF information.
FileName ON/OFF
Enables or disables the filename display in Thumbnail Display mode.
Image Display mode
1. In the Thumbnail Display mode, to enter the Image Display mode, press ENTER.
2. To display the last or next image in the Image Display mode, use the Left and Right keys.
3. To exit Image Display mode and return to Thumbnail Display mode, press ENTER.
4. To display an image in the Image Display mode use the operation UI.
The following operations are supported in the operation UI.
Button
Description
Display
Enter the Image Display mode.
Thumbnail
Enter the Thumbnail Display mode.
SlideShow
Enter the Slide Show mode.
Actual Size
Displays the image in actual size.
Best Fit
Display the image in a size that best fits the screen.
EXIFDisp OFF/On
Enables or disables the EXIF information display.
+90deg
Rotates the image 90 degrees.
-90deg
Rotates the image -90 degrees.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
73
Operation
Image Slide Show mode
1. In the Thumbnail Display mode, to enter the Slide Show mode, press SlideShow.
2. In the Slide Show mode, to enter the Image Display Mode, press ENTER.
3. To display an image in the Slide Show mode use the operation UI.
The following operations are supported in the Slide Show Mode operation UI.
Button
Description
Stop
Stops Slide Show mode.
Next
Displays the next image.
Previous
Displays the previous image.
Delay 3/4/5
Sets a slide show delay in seconds.
Slide Effect
Supports for the following slide effects:
• Slide Right
• Blocks
• RightDown
• XLines
• Slide Up
• Ylines
Repeat ON/OFF
Enables or disables Slide Show Repeat mode.
When the image cannot be displayed due to a memory limitation or an unsupported image format,
the specific image is displayed on the center of the screen.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
74
Troubleshooting
If you cannot resolve an issue using the information provided in this section, contact your reseller
or service center.
No image appears on screen
The image does not appear on the screen.
Resolution
•
Make sure all the cables and power connections are correctly and securely connected.
See Installation on page 19 for more details.
•
Check if the Light Status LED is in Green.
•
Make sure you have removed the lens cap and the projector is switched on.
Incorrectly displayed image
The image is partial, is scrolling, or is otherwise incorrectly displayed.
Resolution
If using a PC (for Windows 95, 98, 2000, XP, Windows 7):
1. On control panel or IR remote keypad, press AUTO.
2. Select My Computer > Control Panel.
3. Double-click Display.
4. Select the Settings tab.
5. Verify your display resolution setting is lower than or equal to WUXGA (1920 × 1200).
6. Click Advanced Properties.
7. If the projector is still not projecting the entire image, change the monitor display:
a. Verify the resolution setting is lower than or equal to WUXGA (1920 × 1200).
b. Switch to the Monitor tab.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
75
Troubleshooting
c. Click Change.
d. Click Show all devices.
e. Under the SP box, select Standard monitor types.
f. Under the Models box, select the appropriate resolution mode.
g. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA
(1920 × 1200).
If using a Notebook:
1. On control panel or IR remote keypad, press AUTO.
2. Adjust resolution of the computer.
3. To send signal out from notebook to projector, press the keys listed below for your Notebook
manufacturer (for example, [Fn]+[F4]):
Notebook brand
Function keys
Acer
[Fn]+[F5]
Asus
[Fn]+[F8]
Dell
[Fn]+[F8]
Gateway
[Fn]+[F4]
IBM/Lenovo
[Fn]+[F7]
HP/Compaq
[Fn]+[F4]
NEC
[Fn]+[F3]
Toshiba
[Fn]+[F5]
Mac Apple
System Preference > Display > Arrangement > Mirror display
4. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment
including the projector.
Presentation is not displayed
The screen of the Notebook or PowerBook computer is not displaying your presentation.
Details
Some Notebook PCs may deactivate their own screens when a second display device is in use. Each
has a different method of reactivation.
Resolution
Refer to your computer manual for information on changing the method of reactivation.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
76
Troubleshooting
Unstable or flickering images
The image is unstable or is flickering when projected.
Resolution
•
To correct the pixels, use Pixel Track and Pixel Phase.
•
Change the monitor color setting on your computer.
Vertical flickering bar
The image has a vertical, flickering bar when projected.
Resolution
•
To make an adjustment, use Auto Image.
•
Check and reconfigure the display mode of your graphic card to make it compatible with the
projector.
Image is out of focus
The image is out of focus on the screen.
Resolution
•
Make sure both lens caps (front and back) are removed.
•
Adjust the lens focus to fit the screen.
•
Make sure the projection screen is between the required distance.
Image is stretched
The image is stretched when displaying a 16:9 DVD title.
Details
When you play anamorphic DVD or 16:9 DVD, the projector shows the best image if the projector
display mode is set to 16:9 in the on-screen display.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
77
Troubleshooting
Resolution
•
If you play 4:3 format DVD titles, change the format to 4:3 in the projector on-screen display.
•
If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9
(wide) aspect ratio type on your DVD player. For more details, see Size and Position menu on
page 34.
Image is not the correct size
The image is too small or too large.
Resolution
•
Adjust the lens zoom to fit.
•
Verify you are using the correct lens.
•
Change the position of the projector.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
78
Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to
change without notice.
Inputs
The following table details the inputs for HS Series. RB in the Resolution column indicates reduced
blanking.
Signal
Type
PC
Resolution
Frame
rate (Hz)
HDMI
640x350
85
●
640x400
85
●
640x480
59
●
640x480
60
●
●
640x480
72
●
●
640x480
75
●
●
●
●
640x480
85
●
●
●
●
720x400
85
●
●
768x480
60
●
768x480
75
●
768x480
85
●
800x600
50
●
800x600
56
●
●
800x600
60
●
●
800x600
72
●
●
800x600
75
●
●
●
●
800x600
85
●
●
●
●
848x480
50
●
848x480
60
●
848x480
75
●
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
VGA
DisplayPort
DVI
Component
S-Video CVBS
●
●
●
●
●
●
●
●
●
●
●
●
79
Specifications
Signal
Type
PC
Resolution
Frame
rate (Hz)
HDMI
848x480
85
●
960x600
50
●
960x600
60
●
960x600
75
●
960x600
85
●
1024x768
60
●
●
●
●
1024x768
75
●
●
●
●
1024x768
85
●
●
●
●
1064x600
50
●
1064x600
60
●
1064x600
75
●
●
1064x600
85
●
●
1152x720
50
●
1152x720
60
●
1152x720
75
●
1152x720
85
●
1152x864
60
●
●
●
1152x864
70
●
●
●
1152x864
75
●
●
●
1152x864
85
●
●
●
1280x720
50
●
1280x720
60
●
●
●
●
1280x720
75
●
●
●
●
1280x720
85
●
●
●
●
1280x768
60
●
●
●
1280x768
75
●
●
●
1280x768
85
●
●
●
1280x800
50
●
●
●
●
1280x800
60
●
●
●
●
1280x800
75
●
●
●
1280x800
85
●
●
●
1280x960
60
●
●
●
1280x960
75
●
●
●
1280x960
85
●
●
●
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
VGA
DisplayPort
DVI
Component
S-Video CVBS
●
●
●
80
Specifications
Signal
Type
PC
NTSC
Resolution
Frame
rate (Hz)
HDMI
1280x1024
50
●
1280x1024
60
●
●
●
●
1280x1024
75
●
●
●
●
1280x1024
85
●
●
●
●
1360x768
50
●
1360x768
60
●
1360x768
75
●
1360x768
85
●
1366x768
60
●
●
●
●
1400x900
60
●
●
●
●
1400x1050
50
●
1400x1050
60
●
●
1400x1050
75
●
●
●
1440x900
60
●
●
●
1440x900
75
●
1600x900
60
●
1600x1200
50
●
1600x1200
60
●
1680x1050
50
●
1680x1050
60
●
1680x1050
75
●
1704x960
50
●
1704x960
60
●
1728x1080
50
●
1728x1080
60
●
1864x1050
50
●
1864x1050
60
●
1920X1080
50
●
1920X1080
60
●
●
1920X1200RB
60
●
●
●
●
1920X1200RB
50
●
●
●
●
NTSC (M,
4.43)
60
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
VGA
DisplayPort
DVI
Component
S-Video CVBS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
81
Specifications
Signal
Type
PAL
SECAM
SDTV
EDTV
HDTV
Resolution
Frame
rate (Hz)
PAL (B,G,H,I)
50
●
●
PAL (N)
50
●
●
PAL (M)
60
●
●
SECAM (M)
50
●
●
480i
60
●
●
●
●
576i
50
●
●
●
●
480p
60
●
●
●
●
576p
50
●
●
●
●
1080i
25
●
●
●
●
1080i
29
●
●
●
●
1080i
30
●
●
●
●
720p
50
●
●
●
●
720p
59
●
●
●
●
720p
60
●
●
●
●
1080s
23
●
●
1080s
24
●
●
1080p
23
●
●
●
●
1080p
24
●
●
●
●
1080p
25
●
●
●
●
1080p
29
●
●
●
●
1080p
30
●
●
●
●
1080p
50
●
●
●
●
1080p
59
●
●
●
●
1080p
60
●
●
●
●
HDMI
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
VGA
DisplayPort
DVI
Component
S-Video CVBS
82
Specifications
PIP/PBP compatibility
The following table details the PIP/PBP compatibility.
PIP/PBP
Display
USB
USB A
Port
MINI-B
HDMI
VGA
Component
CVBS
S-Video
HDBaseT
RJ45
DVI-D
HDMI
-
-
-
-
-
-
●
●
●
●
●
VGA
-
-
-
-
-
-
●
●
●
●
●
Component
-
-
-
-
-
-
●
●
●
●
●
CVBS
-
-
-
-
-
-
●
●
●
●
●
S-Video
-
-
-
-
-
-
●
●
●
●
●
HDBaseT
-
-
-
-
-
-
●
●
●
●
●
DisplayPort
●
●
●
●
●
●
-
-
-
-
-
USB A
●
●
●
●
●
●
-
-
-
-
-
USB MINI-B
●
●
●
●
●
●
-
-
-
-
-
RJ45
●
●
●
●
●
●
-
-
-
-
-
DVI-D
●
●
●
●
●
●
-
-
-
-
-
Matrix
•
Dot (●): PIP/PBP combinations are enabled.
•
Dash (-): PIP/PBP combinations are disabled.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
83
Specifications
Key features
•
HD 0.65" 1920 × 1080 resolution or WUXGA 0.67" 1920 × 1200 resolution
•
Projection lens compatibility:
•
Horizontal offset ranges: +/-30%
•
Vertical offset ranges: +/-100% (WUXGA) and +/-120% (HD)
Measurements are based on industry standards where offset is calculated as a ratio of
the number of pixels shifted up/ down to half the image size.
•
Dual Processing Warp Module for edge blending and geometric correction (optional)
•
Wireless desktop display using wireless dongle (optional)
•
SNMP traps and email notifications
•
10-bit image processor electronics with modular design
•
All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio
•
The projector can be operated using any of the following:
•
•
The built-in keypad, an infrared (IR) remote control, a wired remote control, a PC/device
using serial communications (Ethernet or RS232)
•
A Web page via Ethernet or from a PC/device via a wireless USB dongle (optional)
Weight:
•
•
Maximum product weight (with lens removed): 15kg (33lb.)
Built-In keypad
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
84
Specifications
List of components
This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
•
IR remote control (P/N: 003-004468-01)
•
Power cords supplied with the projector:
•
UK/Korea/Russia
•
North America
•
Europe
•
Australia/New Zealand
•
Japan
•
India
•
DVI to HDMI dongle
•
User manual (CD)
Due to the difference in applications for each country, some regions may have different
accessories.
The following accessories are available for the projector:
•
Cable Cover GS White (P/N: 140-106108-XX)
•
Cable Cover GS Black (P/N: 140-106119-XX)
•
Standard Lens 1.22 - 1.53 (P/N: 140-132107-XX)
•
Optional Lens 0.95 - 1.22 (P/N: 140-101103-01)
•
Optional Lens 1.52 - 2.89 (P/N: 140-102104-01)
•
Optional Lens 0.75 - 0.95 (P/N: 140-119102-XX)
•
Optional Lens 2.90 - 5.50 (P/N: 140-107109-XX)
•
Optional Lens 1.22-1.52 (P/N: 140-131106-XX)
•
Optional Lens 1.22-1.53 (P/N: 140-100102-XX)
•
1DWUSB-BGN / Wireless dongle (optional accessory) (P/N: 133-113106-XX)
•
Dual Processor Warp Module (optional accessory) (P/N: 133-111104-XX)
•
Christie One Mount (P/N: 108-506102-XX)
•
One Mount Extender Rod (P/N: 121-125109-XX)
•
One Mount Rigging Kit (P/N: 121-126100-XX)
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
85
Specifications
Physical specifications
Learn the dimensions and weight of the projector.
Description
Dimensions
Projector size
Overall size (L x W x H) (excluding lens, feet)
456 mm (18.0 in) x 505 mm (19.9 in) x
190 mm (7.5 in)
Overall size, shipping without lens (L x W x H) (includes
packaging)
596 mm (23.5 in) x 626 mm (24.6 in) x
341 mm (13.4 in)
Projector Weight
Without lens
15.9 kg (35.1 lb)
Shipping without lens (includes packaging)
21.7 kg (47.8 lb)
Operating position
360 degree front to back and portrait capable
Portrait mode (with left side down, with tilt
between 60° to 120° from horizontal)
Physical operating environment
Provides specifications for the operating environment.
•
Operating: 5°C to 40°C
•
5 to 40 degrees C (0 to 2500 ft)
•
5 to 35 degrees C (2500 to 5000 ft)
•
5 to 30 degrees C (5000 to 10000 ft)
•
Storage temperature range: -10°C to 60°C
•
Humidity range: 10% to 85% RH (maximum), non condensing
•
Storage humidity range: 5% to 90% RH (maximum), non condensing
•
Operating altitude: 10,000 ft maximum
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
86
Specifications
Power requirements
Learn the power requirements for the projector.
Parameter
Requirement
Rated voltage
Input
100-240V
Rated current
Input
6A
Line frequency
50/60Hz
AC input coupler
Inrush current
70A max
Maximum power consumption
Input
545W
Maximum power consumption, ECO mode
Input
280W
Maximum power consumption, WLAN mode
Input
< 8.0W
Maximum power consumption, Standby mode
Input
< 0.5W
Regulatory
This product conforms to the following regulations related to product safety, environmental
requirements and electromagnetic compatibility (EMC).
Safety
•
CSA C22.2 No. 60950-1
•
UL 60950-1
•
IEC 60950-1
•
EN 60950-1
Laser Safety
•
IEC 60825-1
•
IEC 62471
•
FDA CDRH CFR 1040.10
•
FDA CDRH CFR 1040.11
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
87
Specifications
Electro-Magnetic Compatibility
Emissions
•
FCC CFR47, Part 15, Subpart B/ANSI C63.4, Class A - Unintentional Radiators
•
CISPR 22/EN55022 Class A - Information Technology Equipment
•
ICES/NMB003 (A) - Information Technology Equipment
Immunity
•
CISPR 24/EN55024 EMC Requirements - Information Technology Equipment
Environmental
•
The product conforms to:
•
EU Directive (2011/65/EU) on the restriction of the use of certain hazardous substances
(RoHS) in electrical and electronic equipment and the applicable official amendment(s).
•
EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and
restriction of chemicals (REACH) and the applicable official amendment(s).
•
EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE) and
the applicable official amendment(s).
•
China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution
caused by electronic information products, the hazardous substances concentration limits
(SJ/T11363-2006), and the applicable product marking requirement (SJ/T11364-2006).
Marking
•
This product conforms to all relevant Canadian, US, and European directives, standards, safety,
health and environmental concerns. International packaging recycling marks conform to:
•
EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE).
•
EU Directive (94/62/EC) on packaging and packaging waste.
•
China packaging recycling mark standard (GB18455-2001).
Federal Communications Commission (FCC)
warning
•
A shielded-type power cord is required in order to meet FCC emission limits and also to prevent
interference to the nearby radio and television reception. It is essential that only the supplied
power cord be used.
•
Use only shielded signal cables to connect I/O devices to this equipment.
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
88
Specifications
On-screen display tree
The following table provides the on-screen display menu tree.
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Auto
Native
4:3
Size Presets
Letterbox
Auto
Full Size
Full Width
Full Height
Custom
Off
Overscan
Zoom
By source set
Only
Size &
Position
Pixel Track
0 - 100
50
Pixel Phase
0 - 100
50
Horz Position
0 - 100
50
Vert Position
0 - 100
50
Digital Horz
Zoom
50%~400%
100
Digital Vert
Zoom
50%~400%
100
Digital Horz
Shift
0 - 100
50
Digital Vert Shift
0 - 100
50
Off
Off
Geometry
Correction
Basic
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
Horz Keystone
0 - 100
(0-20 for
GEO model)
50
(10 for GEO
model)
Vert Keystone
0 - 100
(0-20 for
GEO model)
50
(10 for GEO
model)
Horz
Pincushion
0 - 100
50
Vert Pincushion
0 - 100
50
89
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Pincushion/
Barrel
0 - 20
Basic
4-Corner
Size &
Position
Geometry
Correction
4-Corner
Curve
Curve
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
Level 6
(Or List)
Default
10
Top Left
Horz adjust.
0 - 140
0
Top Left Vert
adjust.
0 - 80
0
Top Right
Horz adjust.
0 - 140
0
Top Right
Vert adjust.
0 - 80
0
Bottom Left
Horz adjust.
0 - 140
0
Bottom Left
Vert adjust.
0 - 80
0
Bottom
Right Horz
adjust.
0 - 140
0
Bottom
Right Vert
adjust.
0 - 80
0
Top Left
Horz adjust.
0 - 140
0
Top Left Vert
adjust.
0 - 80
0
Top Right
Horz adjust.
0 - 140
0
Top Right
Vert adjust.
0 - 80
0
Bottom Left
Horz adjust.
0 - 140
0
Bottom Left
Vert adjust.
0 - 80
0
Bottom
Right Horz
adjust.
0 - 140
0
Bottom
Right Vert
adjust.
0 - 80
0
Top Arc
0 - 300
150
Bottom Arc
0 - 300
150
Left Arc
0 - 300
150
Right Arc
0 - 300
150
90
Specifications
Level 1
Size &
Position
Level 2
Geometry
Correction
Level 3
(Or List)
Rotate
Level 4
(Or List)
4-Corner
Rotation
Level 5
(Or List)
Level 6
(Or List)
Default
Top Left
Horz adjust.
0 - 140
0
Top Left Vert
adjust.
0 - 80
0
Top Right
Horz adjust.
0 - 140
0
Top Right
Vert adjust.
0 - 80
0
Bottom Left
Horz adjust.
0 - 140
0
Bottom Left
Vert adjust.
0 - 80
0
Bottom
Right Horz
adjust.
0 - 140
0
Bottom
Right Vert
adjust.
0 - 80
0
0-16
8
Auto Image
Brightness
0 - 100
50
Contrast
0 - 100
By source set
Auto
Auto
RGB
Color Space
RGB
RGB
REC709
YUV
Image
settings
RGB Video
REC709
REC601
REC709
Maximum
High
Detail
Normal
By source set
Low
Minimum
Video Options
Color
0 - 100
50
Tint
0 - 100
50
Noise Reduction
0 - 100
0
Flesh Tone
Correction
0 - 100
0
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
91
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Video Black
Level
Detect Film
Video Options
Off
On
Off
Off
Closed Captions
cc1
Off
cc2
Input Levels
Red Gain
0 - 100
50
Green Gain
0 - 100
50
Blue Gain
0 - 100
50
Red Offset
0 - 100
50
Green Offset
0 - 100
50
Blue Offset
0 - 100
50
Sync Threshold
0 - 100
50
Reset RGB Gain/
Offset
Presentation
Video
Image
settings
Bright
Picture Settings
Real
By source set
DICOM SIM
Blending
User
Save to User
Image Freeze
Off
Off
On
Video
Film
Gamma
Bright
By source set
CRT
Advanced Image
Settings
DICOM
White Peaking
0 - 100
By source set
Warmest
Color
Temperature
Warm
By source set
Cool
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
92
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Color
Temperature
Bright
Level 5
(Or List)
Level 6
(Or List)
Default
By source set
Off
Edge
Enhancement
Normal
Off
Maximum
Advanced Image
Settings
Off
Color
Enhancement
CE1
CE1
CE2
Christie
RealBalck
Off
On
Language
Lens Settings
Image
settings
On
English
Focus
Command
Zoom
Command
Lens Shift
Command
Lock all Lens
Motors
Allow
Lens Calibration
Command
Locked
Allow
Off
Ceiling Mount
On
Auto
Auto
Rear Projection
Off
Menu Horz
Offset
0 - 100
0
Menu Vert Offset 0 - 100
0
Show Messages
Menu
Preferences
Off
On
Menu
Transparency
Off
On
0 - 90
On
0
Factory Logo
Splash Screen
Setup
Blue
Black
Factory Logo
White
PIN Protect
Command
Change PIN
Command
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
93
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
0.5 W Mode
Standby Mode
AC Power On
Communication
mode
Off
On
Level 5
(Or List)
Level 6
(Or List)
Default
Communication
mode
Off
Never
5 Mins
Power
Management
10 Mins
Auto Shutdown
15 Mins
20 Mins
20 Mins
25 Mins
30 Mins
Off
Sleep Timer
2 Hrs
4 Hrs
Off
6 Hrs
Configuration
High Altitude
IR Control
LED Indicator
Off
Off
On
Off
On
On
Off
On
On
DHCP
IP Address
LAN
Subnet Mask
By set
Default
Gateway
MAC Address
Communications
Enable
Start IP
End IP
WLAN
Subnet Mask
By set
Default
Gateway
MAC Address
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
94
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
WLAN
SSID
Level 5
(Or List)
Level 6
(Or List)
Default
By set
Projector Name
Show Network
Messages
Network
Restart
Network...
By set
Network
Factory
Reset...
2400
4800
9600
14400
Communications
Serial Port Baud
Rate
19200
115200
38400
57600
115200
1200
Configuration
Serial Port Echo
Serial Port Path
Projector
Address
Blending
Marker
Off
On
RS232
HDBaseT
0-9
On
Off
On
Off
Off
RS232
0
Off
Off
Off
Image Blending
White
Grid
Red
Off
Green
Blue
Off
Solid Color
White
Off
Red
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
95
Specifications
Level 1
Level 2
Level 3
(Or List)
Solid Color
Level 4
(Or List)
Green
Bright Adj.
Drop Off Curve
Level 6
(Or List)
Default
Off
Blue
TOP
0… ½
Output
Height
(Pixel)
Bottom
0… ½
Output
Height
Left
0… ½
Output
Width
Right
0… ½
Output
Width
Blending Area
offset
0-2000
1000
non- Blending
Area Offset
0-2000
1000
Overlap
Image Blending
Level 5
(Or List)
70-300
0
100
1.8
Configuration
2.0
Image Gamma
2.2
2.2
2.4
2.6
Enable
Color Matching
Manual
Adjustment
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
On
Off
Off
Auto Test
Pattern
On
Red Part of Red
0-1000
1000
Green Part of
Red
0-1000
0
Blue Part of
Red
0-1000
0
Green Part of
Green
0-1000
1000
Red Part of
Green
0-1000
0
Blue Part of
Green
0-1000
0
Off
On
96
Specifications
Level 1
Level 2
Level 3
(Or List)
Manual
Adjustment
Level 4
(Or List)
Level 5
(Or List)
Blue Part of
Blue
0-1000
1000
Red Part of
Blue
0-1000
0
Green Part of
Blue
0-1000
0
Red Part of
White
0-1000
1000
Green Part of
White
0-1000
1000
Blue Part of
White
0-1000
1000
Reset to
Default
HSG Enable
Auto Test
Pattern
Level 6
(Or List)
Default
Yes
No
On
Off
Off
On
On
Off
Hue
Configuration
Color Matching
Red
Saturation
0 to 254
127
0 to 254
127
0 to 254
127
0 to 254
127
0 to 254
127
0 to 254
127
Gain
Hue
Green
Saturation
Gain
HSG Adjustment
Hue
Blue
Saturation
Gain
Hue
Cyan
Saturation
Gain
Hue
Magenta
Saturation
Gain
Hue
Yellow
Saturation
Gain
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
97
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
0 to 254
127
Red
White Gain
Color Matching
Green
Blue
HSG Adjustment
Reset to
Default
Yes
No
Blank Screen
Aspect Ratio
Hot-Key
Settings
Freeze Screen
Projector Info
Overscan
Closed Captions
Model Name
Serial Number
Native
Resolution
Firmware
Projector Info
Configuration
Boot Code
Configuration
Standby Mode
Lens Lock
Settings
Wheel Index
Factory Reset...
Off
Service
Grid
White
Black
Checkerboard
Color Bars
Test Pattern
Red
Green
Blue
Yellow
Magenta
Cyan
Boresight
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
98
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Phosphor Index
Filter Index
Error log
Show log
Clear log
Mode
Adjustment
LD1 Voltage
LD2 Voltage
Configuration
Service
LD3 Voltage
LD4 Voltage
Laser Diode Info
LD5 Voltage
Blank1
temperature
Blank2
temperature
High
temperature
warning
On
Off
On
Constant Power
Light Source
Mode
Constant
Intensity
Constant Power
ECO mode
Light Source
Constant Power
243-405
243,
292,
340,
389,
Constant
Intensity
0-10
7
259, 275,
308, 324,
356, 373,
405
Total Projector
Hours
Light Sensor
Light Sensor
Calibration
Calibrated?
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
(Display Yes/
No)
99
Specifications
Level 1
Level 2
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
Model Name
Serial Number
Native
Resolution
Firmware
Vxx, Ayy, Bzz
Main Input
Main Signal
Format
Main Pixel Clock
Main Sync Type
Main Horz
Refresh
Main Vert
Refresh
PIP/PBP Input
PIP/PBP Signal
Format
Status
PIP/PBP Pixel
Clock
PIP/PBP Sync
Type
PIP/PBP Horz
Refresh
PIP/PBP Vert
Refresh
Light Source
Power
Total Projector
Hours
Standby Mode
Lens Lock
Settings
IP Address
DHCP
System
Temperature
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
100
Specifications
Level 1
Level 2
Level 3
(Or List)
Main Input
SPEC define
PIP/PBP Input
SPEC define
PIP/PBP Enable
Level 4
(Or List)
Off
Level 5
(Or List)
Level 6
(Or List)
Default
Off
On
Swap
Input
Switching &
PIP
Size
(Small/Medium/
Large)
Main Layout
(PBP, Main Left/
PBP, Main Top/
PBP, Main Right/
PBP, Main
Bottom/PIPBottom Right/
PIP-Bottom Left/
PIP-Top Left/
PIP-Top Right)
Timing
Detection Mode
Normal
Wide
Wide
Active Source
Signal Format
Aspect Ratio
Resolution
Vert Refresh
Horz Refresh
Source Info
Pixel Clock
Sync Type
Color Space
Enable Source
Hot-Key
PIP/PBP
(When PIP/PBP
active)
<PIP/PBP source
lines>
(When PIP/PBP
active)
On
Off
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
On
101
Specifications
Level 1
Level 2
Input
Switching &
PIP
Source Hot-Key
Level 3
(Or List)
Level 4
(Or List)
Level 5
(Or List)
Level 6
(Or List)
Default
VGA
Key number 1
HDMI
Key number 2
DVI-D
Key number 3
Display Port
Key number 4
Component
Key number 5
S-Video
Key number 6
Composite
Key number 7
Christie
Presenter
Key number 8
Card Reader
Key number 9
Mini USB
Key number 0
HDBaseT
Change Sources
Input key
List all Sources
Auto Source
Auto Source
Blank on Signal
Switch
Off
On
Language
Off
English
Off
Grid
Test Pattern
White
Black
Checkerboard
Color Bars
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-01 Rev. 1 (11-2016)
102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement