4K Ultra HD HDMI® In-line Repeater

4K Ultra HD HDMI® In-line Repeater
PRODUCT MANUAL
Part Number: HD4KRPTR
4K Ultra HD HDMI® In-line Repeater
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future
reference.
FEATURES
SPECIFICATIONS
• Allows for two HDMI® Cables to be Coupled Together for Longer Cable
Runs
Operating Temperature Range...................................... -5 to +35 Degrees C (+23 to
+95 F)
• Supports HDR, Ultra HD, [email protected] 60Hz, 4:4:4 Chroma Sampling
Operating Humidity Range........................................... 5 to 90% RH (No
Condensation)
• Supports 18Gbps Bandwidth
• Transmission: 50ft at [email protected], 4:4:4 with HDR using Certified
Premium HDMI Cables (Vanco HDMICPxx series)
Input Video Signal....................................................... 0.5-1.0 Volts P-P
• Supports all 3D formats
Transfer Speed Rate................................................... Maximum 18Gbps
• HDCP 2.2 and 1.4 Compliant
Video Output.............................................................. HDMI
• Power consumption is less than 1W, no power supply required
Video Formats Supported............................................ DTV/HDTV: 480i/576i/480P/5
76P/720P/1080i/1080P/, [email protected]/YUV 4:4:4, 3D video support, HDR Support
*PLEASE NOTE: Specifications of HDMI cables greatly affect the overall performance
and range of the product. Please ensure the type, quality, and length of the HDMI
cables being used are able to pass the desired specifications before connecting to the
HD4KRPTR as the unit does not upscale or downscale audio-video information or quality
Input DDC Signal......................................................... 5 volts p-p(TTL)
Support Video Color format......................................... Up to xv-YCC/deep color 36bit
Support Audio Format................................................. DTS-HD/true-HD/LPCM7.1/
AC3/DTS/DSD
Power Consumption.................................................... 1 watts (Maximum)
Dimension (LxWxH)..................................................... 1.9” L x .5” H x 1” D
Net Weight................................................................ 0.01KG
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make
sure the following items are contained in the shipping carton:
CONNECT AND OPERATE
1. HD4KRPTR
1. Connect the HDMI signal source device (such as STB, Bluray, etc.) into
HDMI Input Port.
2. User’s Manual
2. Connect the HDMI display device (such as HD TV, Projector, etc.) into
HDMI Output Port
3. Power on the source and display.
PANEL DESCRIPTION
1. HDMI Input
2. HDMI Output
ATTENTION: Insert and Extract HDMI cables gently
TECHNICAL SUPPORT
www.vanco1.com
800.626.6445
TROUBLE-SHOOTING
LIABILITY STATEMENT
1. Best results are usually achieved when the source and display resolutions are the
same. If resolutions differ, the product will try to adjust the signal to match the
resolution of the HDTV with the lowest resolution. This will result in a picture with
a lower resolution on the other HDTV sets.
Every effort has been made to ensure that this product is free of defects. The
manufacturer of this product cannot be held liable for the use of this hardware
or any direct or indirect consequential damages arising from its use. It is the
responsibility of the user and installer of the hardware to check that it is suitable
for their requirements and that it is installed correctly. All rights are reserved.
No parts of this manual may be reproduced or transmitted by any form or means
electronic or mechanical, including photocopying, recording or by any information
storage or retrieval system without the written consent of the publisher.
2. If you do not get audio and video, access the “setup” menu on the source or
display to adjust the audio and video settings. If the HDMI control circuit cannot
establish a handshake, then there usually will be no audio or video in addition to a
blue or black screen with a statement similar to “this protocol not supported” or
“weak signal”.
3. If the above mentioned messages display, reset the communication but removing
and reinserting the HDMI cables.
4. If you are still encountering issues, attempt the “hot-plug concept. With all of the
HDMI cables disconnected, turn on the source and plug in the HDMI cable into
it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input,
finally turn on the display and plug the HDMI cable from the receiver into it. This
activates all of the devices in corresponding order and results in a signal being
plugged into a device that is on and will attempt to connect the signal.
5. Most of the major source and display manufacturers employ a proprietary
control channel to communicate between devices from the same manufacturer.
Sometimes this can interfere with the HDMI control circuit or the authentication
of the signal. Call the manufacturer if you experience this issue. Sometimes a
player, an audio/video receiver, or a cable/satellite box may not have the latest
software update, usually this can be downloaded from the manufacturer’s website.
SAFETY AND NOTICE
The HD4KRPTR has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic
equipment, the HD4KRPTR should be used with care. Please read and follow the
safety instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
• Follow all instructions and warnings marked on this unit
• Do not attempt to service this unit yourself, except where explained in this manua
• Provide proper ventilation and air circulation and do not use near water
• Keep objects that might damage the device and assure that the placement of this
unit is on a stable surface.
Manufacturer reserves the right to revise any of its hardware and software
following its policy to modify and/or improve its products where necessary or
desirable. This statement does not affect the legal rights of the user in any way.
LIMITED WARRANTY
With the exceptions noted in the next paragraph, Vanco warrants to the original
purchaser that the equipment it manufactures or sells will be free from defects in
materials and workmanship for a period of two years from the date of purchase.
Should this product, in
Vanco’s opinion, prove defective within this warranty period, Vanco, at its option,
will repair or replace this product without charge. Any defective parts replaced
become the property of Vanco. This warranty does not apply to those products
which have been damaged due to accident, unauthorized alterations, improper
repair, modifications, inadequate maintenance and care, or use in any manner for
which the product was not originally intended.
Items integrated into Vanco products that are made by other manufacturers,
notably computer hard drives and liquid crystal display panels, are limited to
the term of the warranty offered by the respective manufacturers. Such specific
warranties are available
upon request to Vanco. A surge protector, power conditioner unit, or an
uninterruptible power supply must be installed in the electrical circuit to protect
against power surges.
If repairs are needed during the warranty period the purchaser will be required
to provide a sales receipt/sales invoice or other acceptable proof of purchase to
the seller of this equipment. The seller will then contact Vanco regarding warranty
repair or replacement.
• Use only the power adapter and power cords and connection cables designed for
this unit.
• Do not use liquid or aerosol cleaners to clean this unit
• Always unplug the power to the device before cleaning
TECHNICAL SUPPORT
In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445.
You can also email technical support issues to [email protected] When calling,
please have the Model Number, Serial Number (affixed to the bottom of the unit) and
Invoice available for reference during the call.
Please read this Instruction Manual prior to calling or installing this unit, since it will
familiarize you with the capabilities of this product and its proper installation.
All active electronic products are 100% inspected and tested to insure highest product
quality and trouble-free installation and operation. The testing process utilizes the types
of high-definition sources and displays typically installed for entertainment and home
theatre applications.
For additional information, such as helpful installation videos, glossary of terms, etc.
please visit www.vanco1.com.
TECHNICAL SUPPORT
www.vanco1.com
800.626.6445
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement