Provided for by www.bendigosecurity.com.au

NX-148 LCD CODE PAD
TABLE OF CONTENTS
Glossary Of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
.c
om
.a
u
Understanding The Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
en
di
g
os
ec
u
rit
y
Code Pad Functions
Arming In The ON Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Making The System Ready To Arm . . . . . . . . . . . . . . . . . . . . . 7
Using Quick Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Arming In The PARTIAL Mode . . . . . . . . . . . . . . . . . . . . . . . . 7
Disarming The System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Bypassing Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Group Bypassing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Un-bypassing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
View Zone Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting Code Pad Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
View Alarm Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Test Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Change User Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assigning User Code Authority . . . . . . . . . . . . . . . . . . . . . . . 14
Reset Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reading The Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting The System Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using The Door Chime Feature . . . . . . . . . . . . . . . . . . . . . . . 16
Multi-Area Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Service Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Emergency Activation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Evacuation Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
17 ____________
33 ____________
02 ____________
18 ____________
34 ____________
03 ____________
19 ____________
35 ____________
04 ____________
20 ____________
36 ____________
05 ____________
21 ____________
37 ____________
06 ____________
22 ____________
38 ____________
07 ____________
23 ____________
39 ____________
08 ____________
24 ____________
40 ____________
09 ____________
25 ____________
41 ____________
10 ____________
26 ____________
42 ____________
11 ____________
27 ____________
12____________
28 ____________
13 ____________
29 ____________
45 ____________
14 ____________
30 ____________
46 ____________
15 ____________
31 ____________
47 ____________
16 ____________
32 ____________
48 ____________
ec
u
rit
y
.c
om
.a
u
01 ____________
w
w
ZONE DESCRIPTIONS
os
en
di
g
44 ____________
by
w
.b
43 ____________
Functions Performed
Pr
ov
id
e
d
fo
rD
Function Code
ow
nl
oa
d
FUNCTION CODES
Exit Delay Time
Entry Delay Time
ENTRY / EXIT DELAY TIMES
Secondary Exit Delay Time ________
Secondary Entry Delay Time _______
2
THIS MANUAL IS PROVIDED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM
AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY
SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN
THIS BOOKLET. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT
WORKING PROPERLY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE
LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND
ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR INSTALLING COMPANY.
en
di
g
os
ec
u
rit
y
.c
om
.a
u
The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a
4 or 6 digit code into the Code Pad Control, which is similar to a telephone Code Pad. If
your Security Control has been so programmed, you may be able to turn on (ARM) your
System by simply pressing the [ON] or [PARTIAL] key. The system should always be
disarmed using a 4 or 6 digit code. The LED Code Pad includes up to 35 lights and a built-in
electronic sounder. These provide specific information relating to the status of the security
system which is described in the booklet. Understanding what the lights and sounds mean
will help you to easily operate your system.
w
w
w
.b
READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE CODE PAD
CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE. KEEP IN MIND, THE
LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS SYSTEM RELATES
SPECIFICALLY TO THE FOLLOWING MAJOR FACTORS:
ow
nl
oa
d
by
1. The quantity, quality, and placement of security devices attached to this system.
2. The knowledge you have of the security system and how that knowledge is
utilized in a weekly test of the complete system.
rD
YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING A
SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.
Pr
ov
id
e
d
fo
1. Your security system is an electronic device and is subject to failure or
malfunction. Do not rely on it as your single source of security.
2. Your system should be tested weekly.
3. Your system will not work without power.
4. Warning devices will need to be loud enough, wired correctly, and properly placed
to provide notification of an alarm event.
5. Smoke and heat detectors may not detect heat and smoke in all situations.
6. Use qualified security professionals to install and maintain your security system.
7. It may be possible to arm the security system without the backup battery
connected. Your periodic test should be done with A.C. Power removed to
verify the battery is connected and adequately charged.
8. Care should be taken to plug in and restrain the A.C. Transformer after testing.
PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS CAREFULLY
BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF YOU DO NOT
UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU HAVE ANY QUESTIONS
3
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
en
di
g
os
ec
u
rit
y
.c
om
.a
u
ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY LISTED ON PAGE 12
OF THIS BOOKLET.
4
GLOSSARY OF TERMS
Abort Delay: An option that allows a delay in reporting to the central station.
Authority Level: The level of access an individual has when using an alarm
panel.
Central Station: Location where alarm data is sent during an alarm report.
.c
om
.a
u
Chime Feature: An option that allows the code pad to sound a ding-dong
whenever an entry/exit door is opened.
ec
u
rit
y
Codes: Can be either User Codes (relating to a person) or Function Codes (a
toggle switch to turn specific functions on/off). NOTE: A system may have either
99 four (4) digit codes or 66 six (6) digit codes, but not a mixture of the two.
en
di
g
os
Duress Code: An option that allows a special code to be sent to the central
station that indicates the alarm system is being operated under duress.
w
.b
Forced Arming: An option that allows the system to be turned on (ARMED) with
one or more zones open. A system that is ready to be “force armed” will flash
the ready light. (Note: Those zones that are not ready will not create an alarm.)
by
w
w
Function Code: A Function Code is either a four (4) or six (6) digit code that has
been programmed by the installer to operate a device.
ow
nl
oa
d
Group Bypass: An option that allows the user to bypass multiple zones with a
single operation.
Master Code: A master arm/disarm code that can program other user codes.
fo
rD
Multi Area System: A system divided into multiple areas in which its own user
or users control each area.
ov
id
e
d
Partial Arm: A mode used to arm the perimeter and unused areas of an
occupied premises.
Pr
Perimeter: The outer edge of the protected area.
Quick Arm: An option that allows you to turn on (ARM) the security system by
pressing either the [ON] or [PARTIAL] key on the code pad control (for ARMING
only) as programmed by the installing company.
Universal Arming (Uni Arm): When enabled, your alarm system can
automatically determine whether to arm in the Full mode or in the preset Partial
mode by looking to see if you exit your premises or stay inside after arming your
system. Note: This feature can be used in conjunction with “Quick Arm”.
User Code: A four (4) or six (6) digit entry used to arm or disarm the system.
5
UNDERSTANDING THE LIGHTS
Armed Light
The armed light is “on” when the system is armed. The armed light is “off”
when it is disarmed. The armed light will flash when there has been an alarm
during the previous arm cycle.
.c
om
.a
u
Bypass Light
The bypass light is “on” when any zone in this code pad’s area is bypassed.
The zone(s) that is bypassed will also be illuminated. If the bypass light is “off”,
no zones are bypassed.
ec
u
rit
y
Chime Light
The chime light is “on” when the chime feature is “on”; “off” otherwise.
w
w
w
.b
en
di
g
os
Exit Light
The exit light is “on” during the exit delay. Please note that the light will flash
during the last 10 seconds of the exit delay as a warning that the time is running
out. (The user may want to restart the exit delay if the exit light is flashing in
order to prevent an alarm. The user may then press the [Exit] key to restart the
exit delay before the delay expires.)
ow
nl
oa
d
by
Fire Light
A steady fire light means a fire zone has been faulted. A rapidly flashing fire light
means that a fire zone is in a trouble condition.
fo
rD
On Light
The on light is “on” when the system is armed. The on light is “off” when it is
disarmed.
Pr
ov
id
e
d
Partial Light
The partial light is “on” when the system is armed in the Partial Mode. All non
bypassed zones will be delayed and follow the Partial delay time. When armed
in Partial Mode, the Arm, On, and Bypass lights will also be “on”.
Power Light
The power light is on if the primary power is on. The power light will flash if the
system has a low battery condition.
Ready Light
The ready light is “on” when the system is ready to arm and “flashes” if ready
to force arm. The ready light is off when the system is not ready to arm because
of a zone(s) being faulted.
6
CODE PAD FUNCTIONS
ARMING YOUR SYSTEM IN THE “ON” MODE
.a
u
ON is utilized when the user is going away from the premise and wants the
interior protected. Listed below are the steps to arm in the ON Mode:
ec
u
rit
y
.c
om
Step 1 Close all protected doors and windows.
# Ready light will be on or flashing when all protected zones and
sensors are secure. NOTE: If any zones are bypassed, a sensor
in that zone can be violated without affecting the ready light.
en
di
g
os
System Ready
Type Code to Arm
ow
nl
oa
d
by
w
w
w
.b
# The security system will not arm if the ready light is off. Refer to
"Making the System Ready to Arm" below.
System Not Ready
For help, press º
d
fo
rD
# If the power light is off, you have no AC power. Restore power if
possible. If not, contact your installing company listed on page
12.
Pr
ov
id
e
Step 2 Enter your 4 or 6 digit user code to arm the system.
# The armed and exit lights will illuminate.
# You may now leave the building.
System Armed
All Zones Secure
NOTE: The exit light will flash rapidly for the last 10 seconds of the exit delay
as a warning to the user that the exit time is about to expire. The user may
wish to disarm and rearm the system if more time is needed.
7
MAKING THE SYSTEM READY TO ARM
If the ready light is not on or if it is flashing, a zone is not secure. To identify this
zone, use the scroll keys • – to the right of the display to browse through
the zones that are not normal. If you wish to bypass or un-bypass one of these
zones, press the [BYPASS] key while that zone is being displayed. When
u
finished viewing the zones, press the # key to return to the code entry screen.
.c
om
.a
USING THE QUICK ARM
en
di
g
os
ec
u
rit
y
The Quick Arm feature may be used if it is enabled. Quick Arm will allow the
user to arm the security system in the ON mode by pressing the [ON] key. The
system can be quick armed in the PARTIAL mode by pressing the [PARTIAL]
key. This feature is used for ARMING ONLY, and will not disarm the security
system. This is ideal for a maid or baby sitter code, etc.
ARMING SYSTEM IN “PARTIAL” MODE
w
w
w
.b
PARTIAL is utilized when the user is inside the premise and wants protection
around the perimeter. The steps to arm in the PARTIAL Mode are as follows:
id
e
d
fo
rD
ow
nl
oa
d
by
Step 1 Close all protected doors and windows.
# Ready light must be on or flashing when all protected zones and
sensors are secure. NOTE: If any zones are bypassed, a sensor
in that zone can be violated without affecting the ready light.
# The security system will not arm if the ready light is not on or
flashing.
# If the power light is off, you have no AC power. Restore power if
possible. If not, contact your installing company listed on page 12
of this booklet for service.
Pr
ov
System Ready
Type code to arm
Step 2
Press the [PARTIAL] key.
# The bypass light will illuminate indicating that all interior zone(s)
are bypassed. (All interior devices will bypass automatically,
giving the user freedom of movement within the interior area.)
# The partial light will not illuminate. NOTE: All non 24 hour zone
are delayed.
8
DISARMING THE SYSTEM
.c
om
.a
u
When you enter the protected area through one of the designated Entry/Exit
doors, the keypad control will sound a continuous tone for the duration of the
entry delay time, or until you enter a valid code.
Type code to
Disarm
rit
y
# Enter a valid user code.
w
w
w
.b
en
di
g
os
ec
u
# The red armed light will go off and
the tone will stop. The security
system is now DISARMED. If a valid code is not entered before the end
of the entry delay, an alarm will occur. NOTE: If the red armed light is
flashing during the entry delay, the alarm system has been activated in
your absence. Leave the building immediately and call your alarm
company and/or the police from a safe location.
BYPASSING ZONES
ow
nl
oa
d
by
If you wish to bypass one or more zones, this must be done while the system
is in the disarmed state. If the zone is not known, refer to Procedure #2.
Press the [BYPASS] key.
fo
Step 1
rD
Procedure #1: If you know the number of the zone to bypass, use the following
steps:
When the LCD prompts for a code (optional, if programmed),
enter your user code.
ov
id
e
d
Step 2
The bypass light flashes.
Step 4
Enter 1 or 2 digits indicating the zone you wish to bypass.
Pr
Step 3
(Example: Press the 0
1 keys for zone 1, or 1
2 for zone
12.)
Step 5
Repeat step 4 for any other zone(s) that need to be bypassed.
Step 6
Press the [BYPASS] key again to exit the Bypass Mode. The
9
bypass light will stop flashing upon exiting the Bypass Mode.
Pressing the
•
–
scroll keys will display all bypassed zones.
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
en
di
g
os
ec
u
rit
y
.c
om
.a
u
Press the # key to exit this viewing mode.
10
Procedure #2: If you do not know the number of the zone you wish to bypass,
use the following steps:
Step 1
Press r
Step 2
Use the •
–
scroll keys to browse through the custom
descriptions for the zones in this system.
Step 3
To bypass or un-bypass a specific zone, press the [BYPASS] key
while that zone is displayed.
Step 4
When finished, press the
screen.
The description for zone 1 will be displayed.
.c
om
.a
u
•
ec
u
rit
y
# key to return to the code entry
en
di
g
os
GROUP BYPASS
w
w
w
.b
By pressing the [BYPASS] key, followed by the 0 0 keys, then the [BYPASS]
key again, all zones that are designated as group bypass zones will be
bypassed.
by
UN-BYPASSING
rD
ow
nl
oa
d
To manually un-bypass zones, perform the bypassing procedure on a zone that
is already bypassed. NOTE: All zones will automatically be un-bypassed each
time the system is disarmed.
d
fo
VIEW ZONE STATUS
ov
id
e
Step 1 Enter r
Pr
Step 2
•
. The LCD Screen will display the zone status.
Use the up and down scroll keys to browse through the
descriptions.
The LCD Screen will display the list of all zones in sequential order
by zone number.
Step 3 Press [#] to exit this function.
11
WALK-TEST MODE
Step 1 Press [r] [Chime].
.a
u
Step 2 Enter a “Master Arm/Disarm Code”. Now all zones become 24 hour,
silent, and local (non-reporting zones). By faulting any zone, that
zone will latch its zone light on the LED code pad, and sound the
Chime. The Chime will continue to sound each time a zone is
faulted.
rit
y
.c
om
Step 3 Once all zones are tested (zone lights lit on the LED code pad),
press a “Master Arm/Disarm Code”.
os
0 . Code Pad is now in the “Adjust Tone” mode.
en
di
g
Step 1 Press r
ec
u
SETTING THE CODE PAD TONE
Raise tone
Lower tone
º
º
w
w
w
.b
Step 2 Press the •
up scroll key
located on the right side of the
display to make the code pad
sounder go to higher tones.
ow
nl
oa
d
by
Step 3 Press the – down scroll key to make the code pad sounder adjust
to lower tones.
rD
Step 4 When the desired tone is reached, press the # key to set this tone
and exit from the “Adjust Tone” mode.
d
fo
VIEW ALARM MEMORY
to display the zone(s) on the code pad that created
Pr
ov
id
e
Step 1 Press r 3
the last alarm.
Step 2 The LCD Screen will display the zone description for those zones.
Step 3 Press [#] to exit the alarm
memory.
12
Alarm Memory 1
ZONE 1
TEST FUNCTION (Optional, if programmed)
If programmed, this function will perform a battery test, communicator test,
and/or a siren test. No alarms will be sent, and no reports will be sent unless
a communicator test is performed, in which case a test signal will be sent.
Step 1 Press r
4 . The test will be performed as programmed.
.c
om
.a
u
Step 2 If the siren test is performed, enter a user code to silence the siren.
5 . The LCD Screen will prompt for a code.
ec
u
Step 1 Press r
rit
y
CHANGING USER CODES
w
.b
en
di
g
os
Step 2 Enter [master code]. The LCD Screen will prompt for a user
number. NOTE: For partitioned systems, if you are changing the
code of another person, you must have access to all partitions, or
at least all of the partitions to which the other person has access.
ow
nl
oa
d
by
w
w
Step 3 Enter the 2 digit user number (always 2 digits, i.e. "03" for user 3).
The LCD screen will prompt for a new code. NOTE: To delete a user
code, press [Chime]-[Chime]-[Chime]-[Chime] for a 4-digit code or
[Chime]-[Chime]-[Chime]-[Chime]-[Chime]-[Chime] for a 6-digit
code.
fo
rD
Step 4 Enter the new user code designated for that individual. If it rejects
the code because of a duplication or such, the sounder will beep 3
times.
ov
id
e
d
Step 5 If another user code needs to be programmed, return to step 3 and
enter the user code.
Pr
Step 6 To exit Code Programming, press #
prompting for a new user.
13
while the LCD screen is
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
Photo layout (Page 12 & 13)
14
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
Photo layout (Page 12 & 13)
15
ASSIGNING USER CODE AUTHORITY LEVELS
Assign authority levels to users by following the steps below. Assign user
codes before assigning authority levels. NOTE: You must have authority to
the partition you wish to add or remove from another person’s authority.
Step 1
Press r
Step 2
Enter [master code].
number.
Step 3
Enter the 2 digit user number (always 2 digits, i.e. "03" for user 3).
The LCD will now prompt you for the attributes in the following
chart.
6 . The LCD Screen will now prompt for a code.
ec
u
rit
y
.c
om
.a
u
The LCD Screen will prompt for a user
» DO NOT CHANGE THIS SEGMENT!
en
di
g
Outputs used?
Open / Close Rprt?
os
PROMPT
(It is for use by a professional installer only.)
w
.b
Bypass enable?
w
w
Arm / Disarm?
Master code?
Reserved
Output 4 ?
rD
Output 3 ?
If these messages appear on the LCD screen, press the [r
r]
key until you return to the prompt for the user code or until
you exit this adjust mode.
fo
Output 2 ?
by
Arm only?
0=No 1=Yes
Your key-press will apply to the user code you entered in
Step 3.
ow
nl
oa
d
Sched arm only?
id
e
d
Output 1?
Pr
ov
Step 4 NOTE: The LCD will now display all of the partitions to which this user
has access. If you wish to remove a partition, press the partition
number on the code pad, and the display will mark that partition with
a (-) hyphen indicating access has been removed. If you wish to reestablish user access to the partition, press the partition number
again.
Step 5 Press [r
r] to save the data. The LCD will then prompt you for the next
user code.
Step 6 If another user code needs to be programmed, return to Step 3. If not,
press [#] to exit this feature without saving the data.
16
17
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
RESET FUNCTION
This function is used to reset Smoke Detectors, Zone Troubles, and Zone
Tampers.
Step 1 Disarm the system if it is not already disarmed.
Step 2 Press r
u
7 . Resets have now been performed.
ec
u
rit
y
.c
om
.a
Step 3 If the code pad begins beeping, the reset did not execute properly.
Enter your code to silence the code pad. Wait a few minutes and
repeat step 2 to attempt another reset. If the code pad still beeps after
repeated attempts, please contact your installer.
en
di
g
os
READING THE EVENT LOG
w
w
Step 1 To view the log, press r
for a code.
w
.b
The NX-16 has a 185 event log that can be retrieved using a master code. This
log contains a listing of the last 185 events along with date, time, and partition
where the event occurred.
0 . The LCD screen will prompt you
ow
nl
oa
d
by
9
Step 2 Enter your master code. The LCD screen will now show the most
recent event.
–
fo
rD
Step 3 To view the events from most recent to the oldest, press the
down scroll key.
•
up
ov
id
e
d
Step 4 To view the events from the oldest to the newest, press the
scroll key. The display contains the following information.
Pr
Event
Date
º
º
(Month/Day)
Open
9/25
17:57
ü
Time shown in
24 hour format
75 » User or Zone ID
P3r
r » Indicates partition
and r indicates an
event not reported
This screen shows an opening of Area 3 on September 25th at 5:27 p.m. by user
75. The [r
r] shows that this event is not programmed to be reported to the
central monitoring station.
18
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
r
Step 1 Enter
9
1
The LCD Screen will prompt for a code.
.a
u
Step 2 Enter [master code]. The LCD will now prompt you to raise or lower
the view.
rit
y
.c
om
Step 3 Using the scroll keys to the right of the LCD, you can raise the text
or lower the text.
en
di
g
os
ec
u
Step 4 To advance to the Brightness option, press [r
r].
The LCD will
prompt you to brighten or dim the LCD lighting. Use the scroll keys
again to adjust to desired brightness.
9
7
The LCD Screen will prompt for a code.
by
Step 1 Enter r
w
w
SETTING THE SYSTEM CLOCK
w
.b
Step 5 When completed, exit by pressing [r
r].
ow
nl
oa
d
Step 2 Enter [master code]. The time and date will be displayed with the
current hour flashing.
•
–
scroll keys to select the proper hour.
rD
Step 3 Use the
id
e
d
fo
Step 4 Enter the r key to move to the minutes, day of week, date, month,
and year.
Pr
ov
Step 5 Repeat Steps 3 and 4 until the entire time and date are set.
USING THE DOOR CHIME FEATURE
The door chime is turned on or off by pressing the [CHIME] key. If the chime is
on, the chime light will be illuminated. If the chime is off, the chime light will be
off. Each press of the [CHIME] key will toggle the chime feature on/off and
produce a momentary ding-dong sound.
19
20
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
MULTI-AREA SYSTEMS OPERATION
.a
u
If your system is multi-area and the code pad resides in one area, your code
pad will provide the status of the zones in your area by using the screen
messages described earlier in this manual. The Master Mode of operation
allows you to temporarily access any area (providing your code is authorized)
within the system and to perform functions in other areas. Read this entire
manual to help you understand the different screen messages that will be
displayed from your code pad.
os
en
di
g
LIGHTS IN MULTI-AREA MASTER MODE
ec
u
rit
y
.c
om
NOTE: r 1 will temporarily access the Master Mode. The code pad will
revert back to its assigned area 60 seconds after a keypress, or 10 seconds
without a keypress.
# ARMED will illuminate if ALL areas are armed.
w
w
w
.b
# READY will illuminate if ALL areas are "Ready". The ready light will flash if
all areas are Ready or Force armable.
ow
nl
oa
d
by
# FIRE will illuminate if ANY one area has a Fire condition. The fire light will
flash if ANY area has a Fire Trouble condition.
# POWER will illuminate if the primary power is connected to the NX-16 control
panel. It will flash if the system has a low standby battery condition.
fo
rD
# PARTIAL will illuminate if ANY area has the partial light on.
id
e
d
# CHIME will illuminate if ANY area is in the "Chime" mode.
Pr
ov
# EXIT will illuminate if ANY area is timing an exit delay. It will flash if ANY area
is in the last 10 seconds of an exit delay.
# BYPASS will illuminate if ANY area has a zone bypassed.
# SOUNDER will sound if ANY area has the sounder on. This includes Entry
delay, Exit delay, Chime, and Alarm.
21
DISPLAYS IN THE MULTI-AREA MASTER MODE
# ARMED and READY STATUS
The LCD screen will display the Armed and Ready status of ALL eight (8)
areas if any or all of the areas is armed or not ready.
u
.a
12345678
1234-678
rit
y
.c
om
Ready
Armed
This display is reflecting all 8 areas are
Ready, and Area 5 is disarmed. NOTE: If a
number is flashing on the armed line, that
area is armed Instant. If a number is
flashing on the ready line, that area is ready
to be Force Armed.
If ALL areas are disarmed and ready to arm,
this display will appear on the LCD screen.
en
di
g
os
ec
u
System Ready
Type code to arm
w
.b
# ARMING AND DISARMING MULTIPLE AREAS
d
fo
rD
ow
nl
oa
d
by
w
w
To arm/disarm multiple areas, enter a code that has arm/disarm authority
for ALL of the areas to be armed/disarmed. The following display will
appear on the LCD screen.
The numbers on the top line represent the
disarmed areas to which this code has
1--4 --8
Disarm º
access. The numbers on the bottom line
--3- 67Arm
º
represent the areas that are armed. The
following table describes the possible
conditions of an area.
LCD DISPLAY FOR AREA
TOP LINE OVER BOTTOM LINE
ov
id
e
CONDITION
Area Not Used or Authorized
Dash (-)
Dash (-)
Area Not Ready
Flashing Area #
Dash (-)
Area Ready to Force Arm
Dash (-)
Flashing Area #
Area Armed Instant
Area #
Dash (-)
Area Disarmed & Ready to Arm
Pr
Blank
Blank
22
Dash (-)
Area #
Area is Armed
–
•
To arm all of the areas, press the
down scroll key.
•
To disarm all of the areas, press the up scroll
•
To toggle the condition of a single area between armed and disarmed
conditions, press [r]-[Number of Area]. For example, If Area 4 is armed, [r][4] will disarm Area 4. If Area 4 is disarmed, [r]-[4] will arm it.
•
To control the individual areas, refer to the following section “Operating
Individual Areas in the Multi-Area Mode”.
key.
os
ec
u
rit
y
.c
om
.a
u
•
en
di
g
# OPERATING INDIVIDUAL AREAS IN THE MULTI-AREA MODE
Disarm º
Arm
º
Only the areas authorized by this code will
appear.
ow
nl
oa
d
by
12-4--78
--3-56--
w
w
w
.b
Enter a code that is a valid arm/disarm code for the area you wish to
operate. The following display will appear on the LCD screen.
rD
To toggle between the armed and disarmed states of an individual area,
press [r] [Area number].
Pr
ov
id
e
d
fo
To operate an individual area, enter the number of the area desired. The
LCD code pad will now operate as a single area code pad. All keys and
functions entered will affect this individual area only. The lights and display
represent the status of that area only. The word "System" will be replaced
with the word "Area #". The following is an example of this feature. To exit
this screen, press [#].
Area 5 Ready
Type code to arm
Area 5 is selected and Area 5 is ready to
arm. To exit the individual area mode, enter
[#]-[#].
# SILENCING ALARMS IN THE MULTI-AREA MODE
23
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
en
di
g
os
ec
u
rit
y
.c
om
.a
u
If the code pad is sounding an alarm or the siren is running, it can be
silenced by entering a code with the authority for the area(s) that are in
alarm. NOTE: The [EXIT], [BYPASS], and Alarm Memory [r
r]-[3] function keys
will only work if an individual area is selected.
24
SERVICE DISPLAY
.c
om
.a
u
The following message will be displayed periodically if the security system
requires service. Call your service provider promptly if this message is
observed.
If you see this display, press r
2 . One
Service Required
or more of the following fault messages will
be displayed. Use the scroll keys • –
Type r2 for help
to browse through them. To exit the service
messages, press [#]-[#].
A short circuit of a control’s power supply
has occurred.
ec
u
rit
y
Control
Over-current
Open circuit has occurred on the bell or
siren circuit.
en
di
g
os
Control
Siren trouble
w
.b
(Optional) The Box Tamper circuit has
activated.
ow
nl
oa
d
Control
Phone trouble
by
w
w
Control
Box tamper
id
e
d
fo
rD
Control
Fail to Comm.
The control attempted to communicate a
message to the Central Station, but was
unsuccessful.
A short to ground has been detected on a
control circuit.
Pr
ov
Control
Ground fault
The phone line connected to the control is
not operating properly.
Control
Loss of time
Control
Power trouble
Your system has lost total power and
needs the clock reset.
The main power to your system is not on.
25
Control
Low Battery
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
en
di
g
os
ec
u
rit
y
.c
om
.a
u
The standby battery is low.
26
A short circuit of an expansion devices’
power supply has occurred.
Expansion
Over-current
An auxiliary reporting device has failed to
communicate.
Expansion
Power trouble
The main power to an expansion power
supply is not on.
Expansion
Low Battery
An expansion power supply has a low
battery.
Expander
Box tamper
A box containing an expansion device has
been opened.
w
.b
en
di
g
os
ec
u
rit
y
.c
om
.a
u
Expansion
Aux. comm. fail
w
w
Expansion
Trouble
rD
Expansion
Siren trouble
ow
nl
oa
d
by
An expansion device or code pad is not
reporting to the control panel.
A zone is tampered. Press [r
r] to identify
the tampered zone.
ov
id
e
d
fo
Zone
Tamper, Press r
Open circuit has occurred on the bell or
siren circuit of the expander.
Pr
Zone
Low Batt, Press r
Zone
Lost, Press r
Zone
Trouble, Press r
A wireless device has a low battery. Press
[r
r] to identify the zone.
A wireless or multiplexed zone device is
not reporting to the control. Press [r
r] to
identify the zone.
A zone is experiencing some form of
trouble (probably wiring). Press [r
r] to
27
identify the zone.
KEYPAD CONTROL TONES (BEEPS)
# Beeps for all keypresses.
rit
y
# Sounds a continuous tone during the Entry delay time.
.c
om
.a
u
A sounder is built into the keypad and may sound for any of the following
reasons:
ec
u
# Pulses when a day zone is violated while the system is disarmed.
en
di
g
os
# Pulses when a FIRE zone has a trouble condition.
w
.b
# Pulses when the armed status changes and the AC power is off.
w
w
# Beeps 3 times for trying to arm with the "READY" light off, if "FORCE
ARMING" has not been selected.
ow
nl
oa
d
by
# Beeps 1 second for the "CHIME" feature.
# Beeps 1 second at the end of the exit delay.
rD
# Beeps to indicate telephone line fault if selected.
ov
id
e
d
fo
# Beeps 1 long beep followed by 3 short beeps to alert you that there are
only ten seconds remaining in the exit delay.
Pr
When pulsing, the keypad sounder may be silenced by entering a valid code.
The arm/disarm state of your system will not change when entering a code to
silence a pulsing keypad sounder.
28
EMERGENCY ACTIVATION KEYS
.c
om
.a
u
NOTE: You must hold these keys for 2 seconds to activate these functions.
Your system may not be programmed for these activations.
os
ec
u
rit
y
Fire Key - If programmed, you can activate the Fire alarm by pressing the
Emergency Activation [Fire] key for two seconds. If your system is connected to
a monitoring center, an emergency report could be sent to that center. This key
should only be pressed in an emergency situation requiring response by fire
department personnel.
w
w
w
.b
en
di
g
Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing
the Emergency Activation [Auxiliary] key for two seconds. If your system is
connected to a monitoring center, an emergency report could be sent to that
center. This key should only be pressed in an emergency situation requiring
response by emergency personnel.
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
Police (Panic/Hold-Up) Key - If programmed, when the Emergency Activation
[Police] key is pressed for two seconds, a local audible alarm will sound. If your
system is connected to a monitoring center, an emergency report could be
transmitted to that center. These keys should only be pressed in an emergency
situation requiring immediate response by law enforcement personnel.
29
EMERGENCY EVACUATION PLAN
An emergency evacuation plan should be established for an actual fire alarm
condition. For example, the following steps are recommended by the National
Fire Protection Association and can be used as a guide in establishing an
evacuation plan for your building.
rit
y
.c
om
.a
u
Draw up a floor plan of your home. Show windows, doors, stairs, and rooftops
that can be used for escape. Indicate each occupant's escape routes. Always
keep these routes free from obstruction. Determine two means of escape from
each room. One will be the normal exit from the building. The other may be a
window that opens easily.
en
di
g
os
ec
u
An escape ladder may have to be located near the window if there is a long drop
to the ground below. Set a meeting place outdoors for a headcount of the
building occupants. Practice escape procedures. In a home, sleep with
bedroom door closed; this will increase your escape time. If you suspect fire,
test the door for heat.
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
If you think it is safe, brace your shoulder against the door and open it cautiously.
Be ready to slam the door if smoke or heat rush in. Practice escaping to the
outdoors and meeting in an assigned spot. Call the Fire Department from a
neighbour's phone. Early warning fire detection is best achieved by the
installation of fire detection equipment in all rooms.
30
31
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
d
id
e
ov
Pr
ow
nl
oa
d
rD
fo
by
w
.b
w
w
u
.a
.c
om
rit
y
ec
u
os
en
di
g
SYSTEM NOTES
u
.a
.c
om
rit
y
ec
u
os
en
di
g
Pr
ov
id
e
d
fo
rD
ow
nl
oa
d
by
w
w
w
.b
FOR SERVICE, CONTACT:
NX148 LCD CODE PAD
NX148DASIB98 Rev B (11-01-98)