STAINLESS STEEL
HAND SINKS
SIDE SPLASH UNITS
Item #:
Qty #:
Model #:
Project #:
7-PS-66
7-PS-66-NF (Faucet Not Included)
7-PS-40
Includes
Removable
Rear
Utility Tray
STANDARD FEATURES:
One piece Deep Drawn sink bowl design.
Sink bowl is 10” x 14” x 5”.
Keyhole wall mount bracket.
Stainless steel basket drain 1-1/2” IPS.
Splash mounted 4” O.C. gooseneck faucet furnished with aerator.
7-PS-40 & 7-PS-66 Series Specific Features:
Welded 7 3/4” high side splashes.
7-PS-66W includes K-316 Wrist Handle Faucet
7-PS-40 lever operated drain and built-in overflow with
plastic overflow tube and spring clamps. P-Trap is 1 1/2” IPS.
7-PS-56 Specific Features:
Space Saver Sink bowl is 9” x 9” x 5”.
7 3/4” high side splashes.
Flat-Top Strainer 1-1/2” IPS.
7-PS-66W
7-PS-76 Specific Features:
12” high side splashes.
Includes 17 1/4” x 3” x 2 5/16” Full length removable Utility Tray
for use with 12” Side Splash Units.
Lever operated drain and built-in overflow with
plastic overflow tube and spring clamps. P-Trap is 1 1/2” IPS.
7-PS-76
7-PS-66L
or 7-PS-66R (Shown)
7-PS-87 Specific Features:
Same features as 7-PS-40 Plus C-Fold Paper Towel &
Soap Dispenser.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a
satin finish.
Die formed Countertop Edge with a 3/8” No-Drip offset.
One sheet of stainless steel - No Seams.
All sink bowls have a large liberal radii with a minimum dimension
of 2” and are rectangular in design for increased capacity.
MATERIAL:
7-PS-87
7-PS-56 SPACE SAVER
9” x 9” x 5” Bowl
Heavy gauge type 304 series stainless steel.
Wall mounting bracket is galvanized and of offset design.
All fittings are brass / chrome plated unless otherwise indicated.
MECHANICAL:
Faucet supply is 1/2” IPS male thread hot and cold.
REMOVABLE UTILITY TRAY 7-PS-48
8” x 3” x 2 5/16” Tray - Tray hem allows to hang from
any standard side splash. Perforated for water drainage.
Faucets Are AB1953 Lead Free Compliant.
For Replacement Faucets & Upgrades, Drains & Accessories
Visit our website at www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
www.advancetabco.com
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
For Smart Fabrication™ Quotes:
Email: smartfab@advancetabco.com or Fax: 631-586-2933
REF-B
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500” Interior: ± .250”
FITTINGS SUPPLIED AS SHOWN
7-PS-40, 7-PS-66, 7-PS-66-NF, 7-PS-66W & 7-PS-66RorL
(7-PS-66 Series Excludes P-Trap & Lever Drain & Overflow)
ALL DIMENSIONS ARE TYPICAL
7-PS-56
17 1/4"
14"
12"
9"
2"
15 1/4"
TOP VIEW FOR
7-PS-40 & 7-PS-66 Series
10"
2"
16"
9"
Faucet
Side Splash
Side Splash
7 3/4"
12 3/4"
9 3/4"
8"
10"
13"
2"
5"
2"
5"
Lever Drain
P-Trap
7-PS-40 - 22 lbs.
7-PS-66 - 19 lbs.
7-PS-66-NF - 19 lbs.
7-PS-66W -22 lbs.
7-PS-66RorL - 20 lbs.
14 lbs.
7-PS-76
7-PS-87
17 1/4"
3"
15 1/4"
15 1/4"
10"
17 1/4"
Faucet
14"
Side Splash
Soap Dispenser
Removable
Utility Tray
Towel Dispenser
Faucet
17"
12"
Side Splash
26 1/2"
8"
5"
5"
Lever Drain
Lever Drain
P-Trap
P-Trap
27 lbs.
REF-B 200 Heartland Boulevard, Edgewood, NY 11717-8380
34 lbs.
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, APRIL 2016