3M Occupational Health & Environmental Safety Division
2011 Top Products Catalogue
3M is
Health
& Safety
Regulatory and
Technical Expertise
Respiratory
Protection
Eye
Protection
Protective
Clothing
Hearing
Protection
Active
Communication
Welding
Protection
Fall
Protection
Head and Face
Protection
Sorbents
Training and
Services
1
3M Occupational Health &
Environmental Safety
Our Brand Promise
3M is dedicated to improving worker safety and comfort. We do this by designing and producing innovative and
reliable products that meet the needs of a wide range of workplace conditions. Our products meet industry best
practices and CSA, ANSI, NIOSH and OSHA standards. The products in this catalogue are among the many offered
by 3M to enhance the quality of the workplace. Worldwide, 3M offers over 60,000 products to industry,
government and consumers.
Safety
Solutions
from the
Brands
You Trust
For more information about 3M Occupational Health & Environmental Safety and our many innovative products, contact the 3M Canada OHES Service & Technical Support Centre at 1-800-267-4414 or visit us online at www.3m.ca/safety.
2
Table of Contents
Section 1 - Hearing, Head, Eye and Face Protection
Hearing Protection
Ear
Protection
Communications
Active
Communication
4-7
Eye
Protection
8-13
Eyewear
14-30
Head-Face Protection
31-32
Section 2 - Body Protection
Fall Protection
Fall
Protection
Protective Coveralls
High Visibility
Personal Protection
33-36
37
38-39
Scotchlite Reflective Material
™
39
Thinsulate Insulation
™
Section 3 - Maintenance Free Respirators
Filtering Facepiece Respirators
Welding
Protection
Comfort
Respiratory
Protection
40
41-42
Welding
43
Specialty
44
45
Product Preference Selector
46-47
Respirator Features
48
Ordering Information
Section 4 - Speedglas Welding Helmets
™
Application Guide and Specifications
9100/9000 Series
Welding
Protection
Respiratory
Protection
49
50-51
52-53
Speedglas Helmets
™
Speedglas Helmets with NHL Team Graphic
54
Adflo Powered Air Respirator
55
L-Series SG
56
™
®
Section 5 - Negative Pressure Respirators, Filters and Cartridges
Facepieces
Filters
Respiratory
Protection
57-58
59
60-61
Cartridges
62
Accessories
Section 6 - Powered and Supplied Air
Personal Protective Equipment
GVP and V-Series Combinations
Respiratory
Protection
63
64
65
Breathe Easy Combinations
Belt Mounted Respirator Systems
66-68
Supplied Air Respirators
69-71
Section 7 - Sorbents
72
Petroleum, Maintenance and Chemical Sorbents
Section 8 - Monitoring Systems
Heat Stress Monitor
Section 9 - Training and Services
3M Occupational Health & Safety Services
Gas Detection
Monitors
73
74-75
3
Hearing, Head, Eye and Face Protection
Hearing Protection
3M™ E-A-R™ Classic™ Earplugs
Product
Description
•Proven
312-1201
3M™ E-A-R™ Classic™ Uncorded Earplugs, in Poly Bag
310-1001
3M™ E-A-R™ Classic™ Uncorded Earplugs in Pillow Pack
311-1101
3M™ E-A-R™ Classic™ Corded Earplugs, in Poly Bag
•3M’s
size, shape, and foam
most popular earplug
•Corded
and uncorded in a variety
of individual packs
•NRR
29 dB / CSA Class AL
3M™ E-A-R™ Classic™ Plus
Earplugs
•Highest
NRR available from a
NVLAP accredited lab
•Longer
•NRR
Product
Description
310-1101
3M™ E-A-R™ Classic™ Plus Uncorded Earplugs, in Pillow Pack
311-1105
3M™ E-A-R™ Classic™ Plus Corded Earplugs, in Poly Bag
for deeper insertion
33 dB / CSA Class AL
3M™ E-A-R™ Classic™ Small
Earplugs
•Smaller
diameter for more comfort
in medium and small ear canals
•NRR
Product
Description
310-1103
3M™ E-A-R™ Classic™ Small Uncorded Earplugs, in Pillow Pack
311-1106
3M™ E-A-R™ Classic™ Small Corded Earplugs, in Poly Bag
Product
Description
311-6000
3M™ E-A-R™ Classic™ Soft Uncorded
311-6001
3M™ E-A-R™ Classic™ Soft, with Cord
Product
Description
340-4004
3M™ E-A-R™ UltraFit™ Corded Earplugs, in Poly Bag
340-4001
3M™ E-A-R™ UltraFit™ Uncorded Earplugs, in Carrying Case
340-4002
3M™ E-A-R™ UltraFit™ Corded Earplugs, in Carrying Case
340-4003
3M™ E-A-R™ UltraFit™ Uncorded Earplugs, in Poly Bag
340-4014
3M™ E-A-R™ UltraFit™ Corded Earplugs, in Econopack
Product
Description
340-6002
3M™ E-A-R™ UltraFit™ Plus Corded Earplugs, in Carrying Case
340-6004
3M™ E-A-R™ UltraFit™ Plus Corded Earplugs, in Poly Bag
29 dB / CSA Class AL
3M™ E-A-R™ Classic™ Soft
Earplugs
•Take
Comfort to a Higher Degree - 98.6°F
•Thermal
Reactive Foam™ gets softer
with wear
•Smaller
•NRR
cell structure for smoothest surface
31 dB / CSA Class AL
3M E-A-R UltraFit Premolded
Reusable Earplugs
™
•The
™
™
most comfortable reusable earplug
• NRR 25 dB / CSA Class AL
3M™ E-A-R™ UltraFit™ Plus
Premolded Reusable Earplugs
•Insertion
stem for easy fitting
•Stems
and cords offered in an assortment
of red, green, purple, blue and yellow
•NRR
4
26 dB / CSA Class AL
Hearing
3M™ E-A-R™ One Touch™
Earplug Dispensers
•The
widest line of earplugs
of any dispenser
•NRRs
Product
Description
391-1000
3M™ E-A-R™ One Touch™ Earplug Dispenser
391-1001
3M™ E-A-R™ Classic™ Earplugs, One Touch™ Refill
391-1004
3M™ E-A-Rsoft™ Yellow Neons™, One Touch™ Refill
up to 33 dB / CSA Class AL
3M™ E-A-Rsoft™ FX™ Earplugs
Product
Description
•Patented
shape to more effectively
fit the ear canal
312-1260
3M™ E-A-Rsoft™ FX™ Corded Earplugs, in Poly Bag
312-1261
3M™ E-A-Rsoft™ FX™ Uncorded Earplugs, in Poly Bag
•Soft, comfortable
312-1274
3M™ E-A-Rsoft™ FX™ Corded Earplugs, in Poly Bag, 100 count box
Product
Description
310-1250
3M™ E-A-Rsoft™ Yellow Neons™ Uncorded Earplugs, in Pillow Pack,
Regular Size
311-1250
3M™ E-A-Rsoft™ Yellow Neons™ Corded Earplugs, in Poly Bag,
Regular Size
312-1250
3M™ E-A-Rsoft™ Yellow Neons™ Uncorded Earplugs, in Poly Bag
Regular Size
Product
Description
312-1219
3M™ TaperFit™ 2 Regular Uncorded Earplugs, in Poly Bag
312-1223
3M™ TaperFit™ 2 Regular Corded, in Poly Bag
312-1208
3M™ E-Z-Fit™ Uncorded Earplugs, in Poly Bag
312-1222
3M™ E-Z-Fit™ Corded Earplugs, in Poly Bag
33 dB / CSA Class AL
3M™ E-A-Rsoft™ Yellow
Neons™ Earplugs
•Highest
NRR available
•Ultimate
•NRR
comfort
33 dB / CSA Class AL
3M™ TaperFit™ 2/E-Z-Fit™
Earplugs
•Soft, smooth
•TaperFit™
•E-Z-Fit™
design for ultimate comfort
2 - 32 dB / CSA Class AL
- 28 dB / CSA Class AL
3M™ ARC Plug™ Earplugs
Product
Description
•Premolded
370-2000
3M™ ARC Plug™ Earplugs, in Carrying Case
•For
reusable earplugs
Hearing, Head, Eye and Face Protection
•NRR
foam
protection against arc blast noise
•Aids
in compliance with NFPA70E
•Red
end in ear NRR 22 dB / CSA Class AL
•Yellow
end in ear 0 dB
3M™ 1100 Foam Earplugs
Product
Description
•Tapered
1100
3M™ Uncorded Earplugs
1110
3M™ Corded Earplugs
•NRR
design to conform for comfort
29 dB / CSA Class AL
5
Hearing, Head, Eye and Face Protection
Hearing Protection
3M™ E-A-R™ Push-Ins™ Earplugs
Product
Description
•No
318-1000
3M™ E-A-R™ Push-Ins™ Uncorded Earplugs, in Poly Bag
& Hygienic
318-1001
3M™ E-A-R™ Push-Ins™ Corded Earplugs, in Poly Bag
Foam Comfort
318-1002
3M™ E-A-R™ Push-Ins™ Uncorded Earplugs, in Poly Bag
318-1003
3M™ E-A-R™ Push-Ins™ Corded Earplugs, in Poly Bag
318-1004
3M™ E-A-R™ Push-Ins™ Uncorded Earplugs, in Poly Bag
318-1005
3M™ E-A-R™ Push-Ins™ Corded Earplugs, in Poly Bag
Roll Down Earplugs
•Quick, Clean
•EARform™
•NRR
28 dB / CSA Class AL
3M™ E-A-R™ Push-Ins™
SofTouch™ Earplugs
Product
Description
318-4000
3M™ E-A-R™ Push-Ins™ SofTouch™ Uncorded Earplugs,
in Poly Bag
318-4001
3M™ E-A-R™ Push-Ins™ SofTouch™ Corded Earplugs,
in Poly Bag
Product
Description
321-2100
3M™ E-A-R™ Express™ Pod Plugs™ Earplugs Blue Grips,
in Pillow Pack
321-8200
3M™ E-A-R™ EXPRESS™ Pod Plugs™ Earplugs Assorted
Colour Grips, in Pillow Pack
Product
Description
311-4101
of earplugs for every hearing
conservation program
3M™ E-A-R™ Classic™ Earplug, Corded,
NRR 33 dB / CSA Class AL
311-4106
3M™ E-A-Rsoft™ Earplug, Corded, NRR 33 dB / CSA Class AL
•Metal
311-4007
3M™ E-A-R™ UltraFit™ Reusable, Corded,
NRR 25 dB / CSA Class AL
•No-roll
convenience
•Highest
NRR of any Push-Ins product
•Easy
fitting, narrow to wide design
•Most
comfortable Push-In style product
•NRR
31 dB / CSA Class AL
3M™ E-A-R™ Express™ Pod Plugs™
Earplugs
•Soft, flexible
grips allow for instant protection
and a great fit
•NRR
25 dB / CSA Class AL
3M™ E-A-R™ Metal Detectable
Earplugs
•Variety
detectable for extra safety
3M™ E-A-Rflex™ Semi-Insert
Hearing Protectors
•A
comfortable, effective, lightweight
alternative to earmuffs
•Provides
excellent hearing attenuation for
frequent removal and refitting
6
Product
Description
320-1000
3M™ E-A-Rflex™ Semi-Aural Hearing Protector,
NRR 28 dB / CSA Class AL
350-1001
3M™ E-A-Rflex™ Foam Tips Semi-Insert Hearing Protector,
10 Bands, NRR 25 dB / CSA Class AL
350-1002
3M™ E-A-Rflex™ Hearing Protector Replacement Foam Pods,
NRR 25 dB / CSA Class AL
3M™ Tri-Flange™ Earplugs
Product
Description
•Multiple
P3000
3M™ Tri-Flange™ Earplugs, Corded, NRR 26 dB
P3001
3M™ Tri-Flange™ Earplugs, Cloth Corded, NRR 26 dB
3M™ No-Touch™ Foam Earplugs
Product
Description
•Foam
P2000
3M™ No-Touch™ Foam Earplugs Uncorded, NRR 29 dB
P2001
3M™ No-Touch™ Foam Earplugs Corded, NRR 29 dB
Product
Description
P1300
3M™ Skull Screws™ Earplugs, Uncorded, NRR 30 dB
P1301
3M™ Skull Screws™ Earplugs, Corded, NRR 30 dB
3M™ Pistonz™ Earplugs
Product
Description
•Instant
use, no roll-down design
P1400
3M™ Pistonz™ Earplugs, Uncorded, NRR 29 dB
look like metal, feel ultra soft
P1401
3M™ Pistonz™ Earplugs, Corded, NRR 29 dB
seals, multiple uses
•Flexible
flanges conform to the ear
canal for custom fit
Stem provides for quick and
clean insertion
•
26 dB / CSA Class AL
comfort without the Roll-Down
•Fuses
soft foam with stem for easy and
hygienic insertion
•NRR
29 dB / CSA Class AL
3M™ Skull Screws™ Earplugs
•Feels
good from Grip to Tip
•No-roll
•Look
convenience
of metal, soft feel of foam
•Twist-to-seal
•NRR
•Tips
design
30 dB / CSA Class AL
•Shaped
•NRR
Hearing, Head, Eye and Face Protection
•NRR
for universal fit
29 dB / CSA Class AL
7
Hearing Protection
Earmuffs
Customer Service: 1 800 361-3560 x 7204
3M™ Peltor™ Optime™ 95 Series
Earmuffs
•
Slim design for high comfort and continuous wear
•
Flexible insertion tip
•
For noise levels up to 95 dBA*
3M™ Peltor™ Optime™ 98 Series
Earmuffs
•Lightweight, comfortable
•
and effective
Universal, affordable protection
•For
Description
H6A/V
3M™ Peltor™ Optime™ 95 Over-the-Head Earmuff,
NRR 21 dB / CSA Class B
H6B/V
3M™ Peltor™ Optime™ 95 Behind-the-Head Earmuffs,
NRR 21 dB / CSA Class B
H6F/V
3M™ Peltor™ Optime™ 95 Folding Earmuffs,
NRR 21 dB / CSA Class B
H6P3E/V
3M™ Peltor™ Optime™ 95 Cap-mount Earmuffs,
NRR 21 dB / CSA Class B
Product
Description
H9A
3M™ Peltor™ Optime™ 98 Over-the-Head Earmuffs,
NRR 25 dB / CSA Class A
H9P3E
3M™ Peltor™ Optime™ 98 Cap-Mount Earmuffs,
NR 23 dB / CSA Class A
Product
Description
H7A
3M™ Peltor™ Optime™ 101 Over-the-Head Earmuffs,
NRR 27 dB / CSA Class A
H7B
3M™ Peltor™ Optime™ 101 Behind-the-Head Earmuffs,
NRR 26 dB / CSA Class A
H7P3E
3M™ Peltor™ Optime™ 101 Cap-Mount Earmuffs,
NRR 24 dB / CSA Class A
H7P3E-01
3M™ Peltor™ Optime™ Deluxe Green Helmet Attached
Dielectric, NRR 24 dB / CSA Class A
Product
Description
H10A
3M™ Peltor™ Optime™ 105 Over-the-Head Earmuff,
NRR 30 dB / CSA Class AL
H10-B
3M™ Peltor™ Optime™ 105 Behind-the-Head Earmuffs,
NRR 29 dB / CSA Class AL
H10P3E
3M™ Peltor™ Optime™ 105 Cap-Mount Earmuffs,
NRR 27 dB / CSA Class AL
H10P3E-01
3M™ Peltor™ Optime™ 105 Cap-Mount Earmuffs, Di-Electric
NRR 27 dB / CSA Class AL
noise levels up to 98 dBA*
3M™ Peltor™ Optime™ 101 Series
Earmuffs
•Versatile
protection
•Effective
protection up to extreme noise levels
•For
Product
noise levels up to 101 dBA*
3M™ Peltor™ Optime™ 105 Series
Earmuffs
•The
ultimate in earmuff technology
•For
noise levels up to 105 dBA*
*OPTIME recommendations are based upon testing per Method B of the most recent ANSI standard, S12.6-1997 (R2002). Method B provides data that approximate the upper
limits to attenuation that can be expected for groups of occupational users. Properly trained and motivated individuals can potentially obtain greater protection. For additional
information on Method B visit www.e-a-r.com/hearingconservation and select the EARLog series of articles.
8
Communications
Receive Audio only / AM-FM
3M™ Peltor™ WorkTunes™ Headsets with
built-in AM/FM Radio
3M™ HearPlugs™ Listen-Only Earpiece or
2-Way Headset
•
Designed for 2-way radio users who must have clear reception of
incoming transmissions while working in high noise areas
•
Plugs into lapel microphone audio jack for monitoring radio traffic
•
3.5 mm mono plug, 25" straight cable
•
HTM06-02 - Listen-Only Earpiece, 3.5 mm mono plug, 8" curly cable
•New digital radio model (WTD2600) with audio input jack for MP3 players
•
HTM07 - Listen-Only Earpiece, 2.5 mm mono plug, 25" straight cable
•3.5
•
HTM07-02 - Listen-Only Earpiece, 2.5 mm mono plug, 8" curly cable
•
HTM08 - Listen-Only Earpiece, 3.5 mm threaded plug
WTD2600
•Audio
output to earcup limited to 82 dB
mm cable for external audio device
•NRR
26 dB / CSA Class A
Hearing, Head, Eye and Face Protection
HTM06
HT Series Listen-Only Headsets
Peltor’s HT series of listen-only headsets are designed for industrial users in high noise environments. Incorporating Peltor’s latest technology in both
earcup design and electronics make this headset the ideal choice for clear, crisp listen-only reception in extreme noise areas in industries such as heavy
equipment operators, airport workers, construction, manufacturing, agricultural and racing.
HTM79A
HTM79B
HTM79P3E
•Headband
model for use with
UHF/VHF 2-way radios
•Neckband
model for use with
UHF/VHF 2-way radios
•Guide
•3.5
•3.5
•For
use with UHF/VHF 2-way radios
•3.5
mm mono plug
mm mono plug
mm mono plug
•HTM79A-03
- 2.5 mm mono plug
HTM79A-42 - 3.5 mm threaded plug
•HTM79B-03
•NRR
•NRR
25 dB / CSA Class A
- 2.5 mm mono plug
HTM79B-42 - 3.5 mm threaded plug
24 dB / CSA Class B
arms for mounting
into slotted hardhats
•HTM79P3E-03
- 2.5 mm mono plug
HTM79P3E-42 - 3.5 mm threaded plug
•NRR
Contact Peltor customer service for more information at: 1 800 361-3560 x 7204
23 dB / CSA Class B
9
Hearing Protection
Communications – 2-Way
3M™ Peltor™ MT Series Industrial Headsets for use with 2-Way Radios
3M’s series of Peltor™ brand of dual muff hearing protection headsets provide superior audio quality and transmit specifications enhancing
communication capabilities.
•Hearing protection in high noise radio communication environments
•Easy to use and affordably priced
Note: Radio specific FL 50* is required to
interface headset with the radio
•Noise cancelling boom microphone
•Deep ear cuff design for all day comfort
MT7H79A
MT7H79B
MT7H79P3E
•In-line
•In-line
•In-line
PTT adapter required
PTT adapter required, B129
•Headband
model with noise
cancelling boom microphone
•Neckband
configuration for use
under hardhats
•Guide
•NRR
•NRR
•NRR
25 dB / CSA Class A
24 dB / CSA Class B
*Push to talk adapter cable required (sold separately).
Contact our Peltor customer service for more information at: 1 800 361-3560 x 7204
3M™ Peltor™ PowerCom PLUS™ Self-Contained
2-Way Radio Headset
MT53H7A4610
10
PTT adapter required
arms for mounting
into slotted hardhats
21 dB / CSA Class B
Commonly Ordered PTT Adapters
FL5014
Motorola GP300 style plug
FL5017
Motorola 3.5 mm stereo
threaded Visar style plug
FL5018
Motorola HT1000 plug style
FL5012
Motorola 6-pin Hirose
plug style
•
Up to 2-mile transmitting range
•
GMRS/FRS format with 22 channels
FL5030
Motorola HT750 plug style
•
38 privacy sub-channels
FL5034
•
Noise cancelling boom microphone
Icom right angled 2.5/3.5
plug style
•
Rechargeable battery pack
FL5035
Kenwood 2.5/3.5 plug style
•
Surround ambient listening feature included
FL5078
•
English/French/Spanish voice sub-system
Kenwood modular sidemount
plug style
•
PTT or Voice Activated transmitting
FL5010
Icom straight 2.5/3.5
plug style
•
Headband model NRR 25 dB / CSA Class B
TKD5502/1
•
MT53H7B4610 - Neckband model for use under
hard hats or without, NRR 25 dB / CSA Class A
Shroud to protect PTT button
from unwanted activation
•
MT53H7P3E4610 - Hard hat mount model for use
with slotted hard hat, NRR 24 dB / CSA Class B
For full radio PTT listing, please refer to
price book or contact customer service.
Communications – Tactical
3M™ Peltor™ TacticalPro™, Com-Tac™ II and SwatTac™ II Electronic Hearing Protectors
MT15H7F SV
MT15H7B SV
MT15H7P3E SV
•Black, folding
•Black, neckband
•Black, hard
•Audio
headband model
input jack
•2 AA
•Audio
model
input jack
•Audio
Battery component for 270 hours
of operation
•2 AA
Battery component for 270 hours
of operation
•2 AA
•NRR
•NRR
•NRR
26 dB / CSA Class A
25 dB / CSA Class A
Hearing, Head, Eye and Face Protection
Clear communications with ambient listening/talk-through and instant impact noise protection. Tactical hearing protectors combine the high
performance of our passive muff with advanced electronics. Wearers can hear low level sounds with remarkable clarity, but when dangerous noises
occur the electronics limit the noise. Provides hearing protection in high noise areas. Available to interface with 2-way radios.*
hat mount model
input jack
Battery component for 270 hours
of operation
22 dB / CSA Class A
3M™ Peltor™ TAC-6 Electronic Hearing Protector
MT15H67FB-01
MT15H69FB-08 SV
A compact hearing protector with unique features for shooting, policing
and military applications. This electronic ear muff attenuates impulse
noise. The TAC-6 effectively perceives and localizes weak sounds and
easily folds into a small package, properly sized for storage in a pocket or
bag during transportation.
•SwatTac™ II Black
•Tactical 6
•Slim line electronic headset, grey colour
•Individual cup volume control
•4 AAA batteries, 200 hr life
•NRR
20 dB / CSA Class B
•Boom microphone and harness sold separately
•Electronic headset for policing and gunrange applications
•Batteries provide 280 hours of use
•Fits under MICH and ACH helmets
• Easily retrofitted to a 2-way communication set-up
• Also available: 2-way communication – Push to talk adapter required**
• Also available: ComTac™ II Headset Military Green
•NRR
* Products are suitable for shooters, policing and military applications.
** Contact Peltor customer service for more information at 1 800 361-3560 x 7204
21 dB / CSA Class B
11
Hearing Protection
Hearing Protection Product Preference Guide
Category
Product
3M™ E-A-R™ Classic™ Foam Earplugs
Type
Roll Down Foam
Hot & Humid
Cold Conditions
Neck cord for
convenience
X
X
X
X
X
3M™ E-A-Rsoft™ Yellow Neons™ & Yellow Neon
Roll Down Foam
Blasts™ Earplugs
Insert Earplugs
Earmuffs
Banded Hearing
Protectors
Audio Headphones
Need to hear
conversations
in low noise
situations
X
3M™ E-A-Rsoft™ FX Earplugs
3M™ E-A-R™ EXPRESS™ Pod Plug™ Earplug
Roll Down Foam
Push In
X
X
X
X
X
X
3M™ E-A-R™ Push-Ins™ Earplugs
Push In
X
X
X
X
3M™ E-A-R™ Push-Ins™ SofTouch™ Earplugs
3M™ Skull Screws™ Earplugs
3M™ No-Touch™ Foam Earplugs
3M™ E-A-R™ UltraFit™ Earplugs
3M™ Tri-Flange™ Earplugs
Push In
Push In
Push In
Pre-Molded
Pre-Molded
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
3M™ E-A-R™ Arc Plug™
Specialized
X
X
X
X
X
3M™ Peltor™ Optime™ 95 Earmuff
H6A/V, H6B/V, H6F/V, H6P3E/V
Earmuff
X
X
3M™ Peltor™ Optime™ 98 Earmuff
H9A/H9P3E
Earmuff
X
X
3M™ Peltor™ Optime™ 101 Earmuff
H7A, H7B, H7P3E
Earmuff
X
X
3M™ Peltor™ Optime™ 105 Earmuff
H10A, H10B, H10P3E
Earmuff
X
X
3M™ E-A-R™ Swerve™ Banded
Hearing Protector
Banded
X
X
3M™ E-A-R™ BUDS™ Headphones
Electronic
X
X
*CSA Class based on Z94.02 Hearing Protection Devices - Performance, Selection, Care and Use. Reaffirmed 2007.
12
Take off & put
on HPDs many
times a day
X
X
X
Comfort Pod
User wears
gloves or has
dirty hands
Small ear
canals
Large ear
canals
Electrical Arc
potential
X
Classic Small
Classic Plus
X
X
E-A-Rsoft
Regular
E-A-Rsoft
Large
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
H6B/V
H6P3E
H9P3E
H7P3E
H7P3E-01
H10B
H10P3E
X
X
Metal
detectable
Classic Plus
Metal
Detectable
E-A-Rsoft
Metal
Detectable
Normally
quiet with
sudden loud
impluse
noises
Noise
Reduction
Rating (NRR)
CSA Class*
X
29 dB
AL
X
33 dB
AL
33 dB
25 dB
AL
AL
28 dB
AL
31 dB
30 dB
29 dB
25 dB
26 dB
Red end in ear
22 dB
Yellow end in
ear 0 dB
AL
AL
AL
AL
AL
Refilable
earplug
dispenser
X
X
X
X
X
X
X
Push-Ins
Metal
Detectable
X
X
X
X
21 dB
X
X
X
X
X
X
H7P3E-01
H10P3E-01
X
AL
none
B
Overhead band
25 dB
On Helmet
23 dB
Overhead band
27 dB
Neck band
26 dB
On helmet
24 dB
A
Overhead band
30 dB
AL
Neck band
29 dB
AL
On helmet
27 dB
AL
Flex 28 tip
28 dB
Comfort Pod
19 dB
26 dB
Hearing, Head, Eye and Face Protection
Situation
Need to wash
& reuse HPDs Compatible
with hard hats
for long
& helmets
periods
of time
A
A
A
A
AL
BL
AL
13
Selection
made
Simple
Premium
3M™ Fuel™2 Safety Eyewear
19
OCC™ 1100 Series Safety Eyewear
18
OCC 100 Series Safety Eyewear
18
OCC 1200 Series Safety Eyewear
18
™
™
Value Plus
3M Lexa Safety Eyewear
22
3M™ Maxim™ Sport Safety Eyewear
20
3M™ Maxim™ Safety Eyewear
20
3M™ Metaliks™ Safety Eyewear
21
3M™ Maxim™ GT Safety Eyewear
20
3M™ Metaliks™ Sport Safety Eyewear
21
™
3M Maxim Plus Safety Eyewear
20
3M™ BX™ Safety Eyewear
24
3M™ QX™ Safety Eyewear
23
3M Nuvo Safety Eyewear
24
3M SX Safety Eyewear
27
3M Privo Safety Eyewear
23
3M X-Sport Safety Eyewear
23
3M™ KX™ Safety Eyewear
26
3M™ Virtua™ Sport Safety Eyewear
25
3M OX Safety Eyewear
26
3M Virtua V10 Safety Eyewear
25
™
3M Tour-Guard III Safety Eyewear
26
3M Zora Safety Eyewear
26
3M Virtua Max Safety Eyewear
25
™
™
™
Value
™
™
™
™
™
™
™
™
Economy
™
™
™
™
™
™
™
™
™
Specialty
3M BX Reader Safety Eyewear
24
3M™ Nuvo™ Reader Safety Eyewear
24
3M Lexa Reader Safety Eyewear
22
3M Maxim 3.0 IR Safety Eyewear
22
3M LightVision 2 Safety Eyewear
19
3M Maxim MinimIzeR Safety Eyewear
20
™
™
™
™
™
™
™
™
™
™
™
3M LightVision 2 Reader Safety Eyewear
19
3M Photochromic Smart Lens Safety Eyewear
19
3M™ Lexa™ MinimIzeR™ Safety Eyewear
22
3M™ Railway Signal Recognition Safety Eyewear
21, 23
3M Lexa MinimIzeR Reader Safety Eyewear
22
3M Virtua Max Reader Safety Eyewear
25
™
™
™
™
™
™
™
™
Goggles
™
3M Centurion Safety Goggles
29
3M™ Maxim™ Air Flow Safety Goggles
27
3M™ Fectoggle™ Safety Goggles
28
3M™ Maxim™ Air Seal Safety Goggles
27
3M Lexa Gogglegear Safety Goggles
28
3M Maxim Splash O-T-G Safety Goggles
27
™
™
14
™
™
™
Style and Comfort
Polycarbonate Lens Selection Guide
Lens Colour/Type
Lens Properties/Use
Suggested Applications/Environments
Clear
Maximum amount of light reaches the eye for
good vision and acuity.
General everyday eye protection.
Grey, Bronze
Reduces brightness and glare from the sun.
Mainly for outdoor daytime use as in typical sunglass use.
Mirror & Coloured Mirror
Reduces brightness and glare from the sun.
Mainly for outdoor daytime use as in typical sunglass use.
Indoor/Outdoor
Reduces brightness and glare when working both indoors
and outdoors.
For tasks requiring frequent movement indoor to/from outdoor.
Loading docks, forklift drivers, construction or similiar jobs.
Photochromic
Reduces brightness and glare from the sun and
indoor lighting.
Lens darkens when outside and lightens when inside.
Do not use for frequent indoor to/from outdoor movement.
Polarized
Reduces brightness and glare from the sun.
Exceptional for reducing reflective glare.
Mainly for outdoor use.
Yellow/Amber
Increases contrast, reduces
haze from blue lighting, excellent UV protection.
Good for inspection tasks and hazy, overcast or foggy days.
Never use for night driving.
Blue
Reduces brightness and glare from indoor lighting.
Very useful to reduce glare, eye stress and fatigue in yellow
light environments.
Filter Shades, Green & Grey
Reduces ultraviolet, visible and infrared radiation.
Predominately used for gas welding, cutting, brazing and
soldering, metal making, furnace work and open flames.
3M™ MinimIzeR™
Reduces ultraviolet, visible and infrared radiation.
Provides good visual sight and acuity while absorbing UV and
some IR. Excellent for wearing with welding helmet.
Clear
Grey, Bronze
Mirror & Coloured Mirror
Indoor/Outdoor
Polarized
Yellow/Amber
Blue
Filter Shades Grey
and Green
Hearing, Head, Eye and Face Protection
This Polycarbonate Lens Selection Guide will help you understand the need for different colour lenses and lens types for industrial applications.
It will also help you determine what type of lens is best for your application and environment. There are many lens options other than Clear,
Grey and Mirror. When choosing a lens, the basic “rule of thumb” is to consider colour opposites.
Photochromic
For information on Prescription Eyewear see page 30.
15
Features Selection Guide
economy
Value
value plus
Premium
Lens Tints or Shades
Safety Eyewear
3M™ Smart Lens™
OCC™
3M™ Fuel™ 2
3M™ Light Vision™ 2
3M™ Metaliks™
3M™ Metaliks™ Sport
3M™ Maxim™
3M™ Maxim™ Plus
3M™ Maxim™ Sport
3M™ Maxim™ GT
3M™ Lexa™
3M™ Fectoids™
3M™ QX™
3M™ Privo™
3M™ Nuvo™
3M™ BX™
3M™ SX™
3M™ X.Sport™
3M™ Nassau™ Rave
3M™ Nassau™ Plus
3M™ Virtua™ V10
3M™ Virtua™ Sport
3M™ Virtua™ Max
3M™ Seepro™
3M™ Seepro™ Plus
3M™ KX™
3M™ OX™
3M™ Tour-Guard™ III
safety goggles
3M™ Maxim™ Splash
3M™ Maxim™ 2x2
3M™ Lexa™ Dust GoggleGear™
3M™ Centurion™
3M™ Lexa™ Splash GoggleGear™
3M™ Fectoggles™
16
Clear
Grey
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bronze
•
I/O Mirror
Light Blue
Amber
•
•
Polarized
RSR
•
•
•
•
•
•
MinimIzeR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Photochromic
•
•
•
•
•
•
•
•
•
•
•
Blue Mirror Red Mirror
Shade 3.0
Shade 5.0
Grey I/O
Lens Coatings
Readers
Uncoated
•
•
•
•
•
•
•
•
•
•
Hard Coat
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Anti-Fog
•
•
•
•
•
•
•
•
•
Comfort
DX™ AF/HC
•
•
•
•
•
•
•
•
•
Soft Nose Soft Temple
Bridge
Tips
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Adjustability
Temples
•
•
•
•
Lens
Angle
•
•
•
•
•
Nose
Bridge
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hearing, Head, Eye and Face Protection
Lens Tints or Shades
•
•
•
•
•
•
•
•
17
Eye Protection
3M Premium Eyewear
™
Orange County Choppers™ Safety Eyewear
The coolest eyewear line just got cooler. Inspired by the internationally popular TV show. Orange County Choppers™ Safety Eyewear has the edgy
styling and solid performance which lets you hold on tight and take compliance for a ride!
100 Series
1100 Series
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
Product
Stock Number
Description
11467-00000-10
XT061586142
OCC™ 101 Eyewear, Silver Aluminum
Frame, Blue Mirror Lens
11774-00000-10
70071543782
OCC™ 1100 Eyewear, Gun Metal Grey
Frame, Clear Anti-Fog Lens
11468-00000-10
XT061586159
OCC™ 102 Eyewear, Black Aluminum
Frame, Red Mirror Lens
11775-00000-10
70071543790
11469-00000
70071559531
OCC™ 103 Eyewear, Black Aluminum
Frame, Indoor/Outdoor Lens
OCC™ 1100 Eyewear, Gun Metal Grey
Frame, Indoor/Outdoor Grey
Anti-Fog Lens
70071543808
70071559549
OCC 104 Eyewear, Black Aluminum
Frame, Clear Anti-fog Lens
11776-00000-10
OCC™ 1100 Eyewear, Gun Metal Grey
Frame, Grey Anti-Fog Lens
11777-00000-10
70071543816
OCC™ 1100 Eyewear, Gun Metal Grey
Frame, Blue Mirror Lens
11470-00000
™
1200 Series
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
11778-00000-10
70071543733
OCC™ 1200 Eyewear, Gun Metal Grey
Frame, Grey Anti-Fog Lens
11779-00000-10
70071543741
OCC™ 1200 Eyewear, Gun Metal Grey
Frame, Indoor/Outdoor Grey
Anti-Fog Lens
11780-00000-10
70071543758
OCC™ 1200 Eyewear, Gun Metal Grey
Frame, Grey Anti-Fog Lens
11781-00000-10
70071543766
OCC™ 1200 Eyewear, Gun Metal Grey
Frame, Blue Mirror Lens
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
For information on Prescription Eyewear see page 30.
18
3M Specialty Eyewear
™
3M™ Light Vision™ 2 Safety Eyewear
3M™ Fuel™ 2 Safety Eyewear
Features lenses with built-in bifocals available in three different magnification diopters.
Lights mounted on each temple provide hands-free task lighting. The LED systems,
includes long-life replaceable CR2032 3V battery, and provides ultra-bright beams that
swivel/adjust for directional convenience.
Tired of running on empty? Pump up compliance rates with Fuel™ 2 eyewear. A sleek,
universal-fit design, with hot colours and flared accents creates attention with bold attitude.
This is a “look” that gets looks from workers. And getting looks equals getting worn.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
11356-00000-10
11476-00000-10
11477-00000-10
11478-00000-10
11479-00000-10
Stock Number
Description
70071539558
3M™ Light Vision™ 2 Eyewear, Black
Temples Clear Anti-Fog Lens Dual
LED Lights
70071539962
3M™ Light Vision™ 2 Eyewear, Grey
Frame, Black Temples, Clear Anti-Fog
Lens, Dual LED Lights
70071539970
3M™ Light Vision™ 2 Reader, Black
Frame, Black Temples, Clear Anti-Fog
Lens, Dual LED Lights, 1.5 Diopter
70071539988
70071539996
3M™ Light Vision™ 2 Reader, Black
Frame, Black Temples, Clear Anti-Fog
Lens, Dual LED Lights, 2.0 Diopter
3M™ Light Vision™ 2 Reader, Black
Frame, Black Temples, Clear Anti-Fog
Lens, Dual LED Lights, 2.5 Diopter
Product
Stock Number
Description
11650-00000-10
70071540291
3M™ Fuel™ 2 Eyewear, Metallic Sand
Frame, Red Overmold, Red Mirror Lens
11651-00000-10
70071540309
3M™ Fuel™ 2 Eyewear, Metallic
Sand Frame, Red Overmold,
Clear Anti-Fog Lens
11652-00000-10
70071540317
3M™ Fuel™ 2 Eyewear, Silver Colour
Frame, Blue Overmold, Blue Mirror Lens
11653-00000-10
70071540325
3M™ Fuel™ 2 Eyewear, Silver
Colour Frame, Blue Overmold,
Clear Anti-Fog Lens
11654-00000-10
70071540333
3M™ Fuel™ 2 Eyewear, Black
Rubberized Frame, Black Overmold,
Grey Anti-Fog Lens
Hearing, Head, Eye and Face Protection
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
3M™ Smart Lens™ Safety Eyewear
Lightens and darkens with changing light conditions. Nylon brow and magnesium alloy
temples. Spring-hinged temples for a narrow or wide fit. Soft, adjustable nosebridge.
Changes from dark to clear in 35 seconds; allows 77.5% light transmission. Changes from
clear to dark in 8 seconds; allows just 22% light transmission. Polycarbonate lens with
abrasion-resistant hardcoat absorbs 99.9% UV.
Compliance: Meets the traffic signal recognition requirements of ANSI Z80.3-2008 and
ANSI Z87.1-2003
Product
Stock Number
Description
13407-00000-5
70071541653
3M™ Smart Lens™ Photochromic
Eyewear, Black Frame
19
Eye Protection
3M Value Plus Eyewear
™
3M™ Maxim™ Safety Eyewear
3M™ Maxim™ Sport Safety Eyewear
Tough by design, but with a weight of less than an ounce, Maxim™ safety eyewear has
the style, comfort and fit you want and features DuoForm mold processing, elastomeric
browguard and temple accents. Patented dual-aspheric lens provides distortion-free vision.
Sport true style with Maxim™ Sport. Athletically inspired frame design in combination
with the patented, sleek, dual-aspheric lens creates a uniquely styled protective eyewear
product. Interchangeable lenses.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
12289-00000-20
Stock Number
Description
70071541372
3M™ Maxim™ Eyewear, Black
Adjustable Temple MinimIzeR™ Lens
70071541380
3M Maxim Eyewear, Black
Adjustable Temple, Grey Undermold
3.0 IR Lens (CSA)
™
12292-00000-20
Product
Stock Number
Description
13274-10000-20
70071541505
3M™ Maxim™ Sport Eyewear, Silver
Sport-Grip Temple, Blue Undermold
Clear Lens
13280-10000-20
70071541547
3M™ Maxim™ Sport Eyewear, Silver
Sport-Grip Temple, Blue Undermold I/O
Mirror Lens
™
13250-00000-20
70071541406
3M™ Maxim™ Eyewear, Black
Adjustable Temple, Clear Lens
13251-00000-20
70071541414
3M™ Maxim™ Eyewear, Black
Adjustable Temple, Bronze Lens
13252-00000-20
70071541422
3M™ Maxim™ Eyewear, Black
Adjustable Temple, Indoor/Outdoor
Mirror Lens
13259-00000-20
70071541455
3M™ Maxim™ Eyewear, Denim
Adjustable Temple, Clear Lens
3M™ Maxim™ GT Safety Eyewear
3M™ Maxim™ Plus Safety Eyewear
Protective eyewear with a lightweight frame and cushioned browguard for added comfort.
Metallic grey frame colour, soft black rubber accents and adjustable dual-injected temples
with 3-position lens adjustment for day-long comfort.
Wider frame fits workers with larger head sizes.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
20
Stock Number
Description
Product
Stock Number
Description
14246-00000-20
70071561594
3M Maxim GT Eyewear, Black
Frame, Clear Anti-Fog Lens
12282-00000-20
70071541349
3M™ Maxim™ Plus Eyewear, Blue Ice
Brow/Temples, Clear DX Lens
14247-00000-20
70071561602
3M™ Maxim™ GT Eyewear, Black
Frame, Grey Anti-Fog Lens
12283-00000-20
70071541356
3M™ Maxim™ Plus Eyewear, Blue Ice
Brow/Temples, Grey DX Lens
14248-00000-20
70071561610
3M™ Maxim™ GT Eyewear, Black
Frame, I/O Mirror Lens
™
™
3M Value Plus Eyewear
™
3M™ Metaliks™ Safety Eyewear
3M™ Metaliks™ Sport Safety Eyewear
A distinctive, contemporary look, sets the Metaliks™ Family of Safety Eyewear apart from
the competition. Features include a polished metal frame with a sweeping 10-base lens
geometry. A formable, rubber tipped temples and a soft nose bridge complement the
wrapped protection
A brushed nickel frame and a sports-styled lens adds adrenaline to the Metaliks™ Family
of Safety Eyewear. Rubber tipped temples and a soft nosebridge to complement the
wrapped protection.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
Product
Stock Number
Description
11532-10000-20
70071540168
3M Metaliks Eyewear, Blue Frame
Clear Anti-Fog Lens
11343-10000-20
70071539517
3M™ Metaliks™ Sport Eyewear, Brushed
Nickel Frame Clear Anti-Fog Lens
15170-10000-20
70071541976
3M™ Metaliks™ Eyewear, Silverized
Frame, Clear Anti-Fog Lens
11344-10000-20
70071539525
3M™ Metaliks™ Sport Eyewear, Brushed
Nickel Frame Grey Anti-Fog Lens
15171-10000-20
70071541984
3M™ Metaliks™ Eyewear, Silverized
Frame, Grey Anti-Fog Lens
11345-10000-20
70071539533
15172-10000-20
70071542933
3M™ Metaliks™ Eyewear, Silverized
Frame, Indoor/Outdoor Mirror Hard
Coat Lens
3M™ Metaliks™ Sport Eyewear,
Brushed Nickel Frame Indoor/Outdoor
Mirror Hard Coat Lens
11346-10000-20
70071539541
3M™ Metaliks™ Sport Eyewear, Brushed
Nickel Frame Amber Anti-Fog Lens
10150-00000-20
70071558103
3M™ Metaliks™ Eyewear, Railway
Signal Recognition Lenses, Silverized
Frame Anti-Fog (CSA)
11540-10000-20
70071540176
3M™ Metaliks™ Sport Eyewear,
Brushed Nickel Frame Blue Mirror
Hard Coat Lens
10151-00000-20
70071558111
3M™ Metaliks™ Eyewear, Railway
Signal Recognition Lens Sport Brushed
Nickel Frame Anti-Fog (CSA)
™
™
Hearing, Head, Eye and Face Protection
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
For information on Prescription Eyewear see page 30.
21
Eye Protection
3M Value Plus Eyewear
™
3M™ Lexa™ Safety Eyewear
Provides a unique combination of performance, comfort, fit, and application versatility.
The Lexa™ line includes task-specific lens tints and shades.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
3M™ Lexa™ Readers and MinimlzeR™
Safety Eyewear
Lexa™ Bifocal Readers are available in three different magnification diopters for workers
who have difficulty reading small print or who engage in small detail work.
Compliance: Meets ANSI Z87.1 Standards and CSA Z94.3 Readers meet ANSI Z87.1 only
Product
Stock Number
Description
15200-00000-20
70071542032
3M™ Lexa™ Eyewear, Black Temple
Clear DX Lens, Medium
15201-00000-20
70071542040
3M™ Lexa™ Eyewear, Blue Temple,
Clear DX Lens, Medium
15204-00000-20
70071542057
3M™ Lexa™ Eyewear, Black Temple,
Grey DX Lens, Medium
70071541885
3M™ Lexa™ Eyewear, Black Temple,
Clear DX Lens, Large
70071541927
3M™ Lexa™ Eyewear, Black Clear
Medium
70071541935
3M Lexa Eyewear, Black Grey
Medium
70071541943
3M™ Lexa™ Eyewear, Black Clear
Large
70071541950
3M™ Lexa™ Eyewear, Blue Clear
Medium
70071542131
3M™ Lexa™ Eyewear, Replacement
DX Lens Clear, Medium
70071542149
3M™ Lexa™ Eyewear, Replacement
DX Lens Grey, Medium
15100-00000-20
15152-00000-100
15153-00000-100
15154-00000-100
15158-00000-100
15245-00000-20
15246-00000-20
™
™
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
For information on Prescription Eyewear see page 30.
22
Product
Stock Number
Description
15250-00000-20
70071542917
3M™ Lexa™ Eyewear, Black Frame
MinimIzeR™ Lens, Medium
15150-00000-20
70071542909
3M™ Lexa™ Eyewear, Black Temple,
MinimIzeR Lens, Large
13415-00000-20
70071558020
3M™ Lexa™ MinimIzeR™ Eyewear
with Readers +1.5 Diopter
13416-00000-20
70071558038
3M™ Lexa™ MinimIzeR™ Eyewear
with Readers +2.0 Diopter
13417-00000-20
70071558046
3M™ Lexa™ MinimIzeR™ Eyewear
with Readers +2.5 Diopter
13317-00000
70071519790
3M™ Lexa™ Eyewear, Reader 1.5 Md
Grey Replacement Lens
13319-00000
70071519816
3M™ Lexa™ Eyewear, Reader 2.5 Md
Grey Replacement Lens
13353-00000-20
70071541588
3M™ Lexa™ Eyewear, Black Temple
Clear Reader 1.5 Diopter
13354-00000-20
70071541596
3M™ Lexa™ Eyewear, Black Temple
Clear Reader 2.0 Diopter
13355-00000-20
70071541604
3M™ Lexa™ Eyewear, Black Temple
Clear Reader 2.5 Diopter
Readers
3M Value Eyewear
™
3M™ QX™ Eyewear
3M™ Privo™ Safety Eyewear
Features a curved lens for the popular athletic look and offers many options to maximize
fit and comfort for virtually every worker. Three temple designs, and two nosepiece
styles offer better fit for a wider selection of facial profiles. The wraparound design and
seamless lens provide excellent front and side coverage, distortion-free vision, and
excellent peripheral clarity.
Sleek European inspired styling. Soft DuoForm molded nosebridge and temple tips for all
day comfort. Universal fit design, available with Anti-Fog lenses.
Product
Stock Number
Description
12261-00000-20
70071541265
3M™ Privo™ Eyewear, Black Frame/Orange
Accent Temple Tips, Clear Anti-Fog Lens
12262-00000-20
70071541273
3M™ Privo™ Eyewear, Black Frame/Orange
Accent Temple Tips, Grey Anti-Fog Lens
Product
Stock Number
Description
12100-10000-20
70071541018
3M™ QX™ 1000 Eyewear Black
Spatula Temple Clear Lens
12263-00000-20
70071541281
3M™ Privo™ Eyewear, Black Frame/Orange
Accent Temple Tips, Amber Anti-Fog Lens
12101-10000-20
70071541026
3M™ QX™ 1000 Eyewear Black
Spatula Temple Grey Lens
12264-00000-20
70071541299
3M™ Privo™ Eyewear, Black Frame/Orange
Accent Temple Tips, Indoor/Outdoor Mirror Lens
12109-10000-20
70071541042
3M™ QX™ 2000 Eyewear Black
Spatula Temple Soft Nose Clear Lens
12265-00000-20
70071541307
3M™ Privo™ Eyewear, Silver Frame/Red
Accent Temple Tips, Clear Anti-Fog Lens
12110-10000-20
70071541059
3M™ QX™ 2000 Eyewear Black
Spatula Temple Soft Nose Grey Lens
12266-00000-20
70071541315
3M™ Privo™ Eyewear, Silver Frame/Red
Accent Temple Tips, Grey Anti-Fog Lens
12115-10000-20
70071541067
3M™ QX™ 3000 Eyewear Black Sport
Grip Temple Soft Nose Clear Lens
12267-00000-20
70071541323
3M™ Privo™ Eyewear, Silver Frame/Red
Accent Temple Tips, Amber Anti-Fog Lens
12128-10000-20
70071541091
3M™ QX™ 1000 Eyewear Clear
Replacement Lenses
12268-00000-20
70071541331
3M™ Privo™ Eyewear, Silver Frame/Red
Accent Temple Tips, Indoor/Outdoor Mirror Lens
3M™ X.Sport™ Safety Eyewear
X.Sport protective eyewear combines unisex athletic style and comfort with a lightweight,
high wrap nylon frame, flexible Sport Grip™ Temples, adjustable nosebridge and
polycarbonate anti-fog lens.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
15176-00000-20
70071541992
15177-00000-20
3M™ SX™ Safety Eyewear
Provides protection and sports-inspired style with a sleek design. Lightweight with
distortion-free optics. Adjustable temples. DX™ anti-fog hard coat.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
3M X.Sport Eyewear with Black
Frame, Grey Anti-Fog Lens
12135-00000-20
70071541125
3M™ SX™ 1000 Eyewear, Black Full
Frame, Clear Lens
70071542008
3M™ X.Sport™ Eyewear with Black
Frame, Grey Anti-Fog Lens
12137-00000-20
70071541133
3M™ SX™ 1000 Eyewear, Black Full
Frame, Grey Lens
15178-00000-20
70071542016
3M™ X.Sport™ Eyewear with Black
Frame I/O Mirror Hard Coat Lens
12141-00000-20
70071541141
3M™ SX™ 2000 Eyewear, Black Half
Frame, Clear Lens
15182-00000-20
70071542024
3M™ X.Sport™ Eyewear with Silverized
Frame Clear Anti-Fog Lens
10152-00000-20
70071558129
3M™ X.Sport™ Eyewear with Railway
Signal Recognition Lens Black Frame
Anti-Fog
™
™
Hearing, Head, Eye and Face Protection
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards. Exceeds Military Vo Test
Regimen for High Velocity Impact Protection (QX 2000 and QX 3000 only)
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
23
Eye Protection
3M Value Eyewear
™
3M™ BX™ Safety Eyewear and Readers
3M™ Nuvo™ Eyewear and Readers
Adjusts to the workers, instead of workers having to adjust to it. With many adjustable
features, BX™ Eyewear provides a better fit, which can help workers have a better
attitude towards wearing their eyewear. BX™ Readers feature lenses with built-in bifocals
available in three different magnification diopters for workers who have difficulty reading small
print or who engage in small detail work.
True Retro-Styling of the 1960’s has been reinterpreted into the Nuvo™ Protective Eyewear.
Nuvo™ Eyewear affords incredible protection in a lightweight comfortable frame with the
classic look of a dual lens and soft nose piece.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
11380-00000-20
70071539624
3M™ BX™ Eyewear, Silver/Black
Frame, Clear, Anti-Fog Lens
11381-00000-20
70071539632
11471-00000-20
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Stock Number
Description
11411-00000-20
70071539731
3M™ Nuvo™ Eyewear, Translucent Grey
Brow Grey Temple Clear Anti-Fog Lens
3M™ BX™ Eyewear, Silver/Black
Frame, Grey, Anti-Fog Lens
11412-00000-20
70071539749
3M™ Nuvo™ Eyewear, Translucent Grey
Brow Grey Temple Grey Anti-Fog Lens
70071539913
3M™ BX™ Eyewear, Ocean Blue
Frame, Clear Anti-Fog Lens
11518-00000-20
70071540085
3M™ Nuvo™ Eyewear, Tortoise Frame
Clear Anti-Fog Lens
11472-00000-20
70071539921
3M™ BX™ Eyewear, Ocean Blue
Frame, Indoor/Outdoor Mirror Lens
11519-00000-20
70071540093
3M™ Nuvo™ Eyewear, Tortoise Frame
Indoor/Outdoor Mirror Lens
11523-00000-20
70071540135
3M™ BX™ Eyewear, Ocean Blue
Frame, Light Blue, Anti-Fog Lens
11434-00000-20
70071539764
70071540143
3M™ BX™ Eyewear, Ocean Blue
Frame, Light Amber, Anti-Fog Lens
3M™ Nuvo™ Eyewear, Translucent Grey
Frame, Clear Lens, +1.5 Diopter
70071539772
70071540150
3M BX Eyewear, Ocean Blue Frame,
Indoor/Outdoor, Grey Anti-Fog Lens
11435-00000-20
3M™ Nuvo™ Eyewear, Translucent Grey
Frame, Clear Lens, +2.0 Diopter
11436-00000-20
70071539780
3M™ Nuvo™ Eyewear, Translucent Grey
Frame, Clear Lens, +2.5 Diopter
11524-00000-20
11525-00000-20
™
™
Readers
24
True Retro-Styling reminiscent of the 1960s; available in 3 bi-focal magnification
strengths: +1.5, +2.0, +2.5.
Product
Readers
11374-00000-20
70071539566
3M™ BX™ Reader, Silver/Black Frame,
Clear, +1.5 Diopter
11520-00000-20
70071540101
3M™ Nuvo™ Eyewear, Tortoise Frame
Indoor/Outdoor Mirror Lens +1.5 Diopter
11375-00000-20
70071539574
3M™ BX™ Reader, Silver/Black Frame,
Clear, +2.0 Diopter
11500-00000-20
70071540002
3M™ Nuvo™ Eyewear, Translucent Grey
Frame, Grey Lens, +1.5 Diopter
11376-00000-20
70071539582
3M™ BX™ Reader, Silver/Black Frame,
Clear, +2.5 Diopter
11501-00000-20
70071540010
3M™ Nuvo™ Eyewear, Translucent Grey
Frame, Grey Lens, +2.0 Diopter
11377-00000-20
70071539590
3M™ BX™ Reader, Silver/Black Frame,
Grey, +1.5 Diopter
11521-00000-20
70071540119
3M™ Nuvo™ Eyewear, Tortoise Frame
Indoor/Outdoor Mirror Lens +2.0 Diopter
11378-00000-20
70071539608
3M™ BX™ Reader, Silver/Black Frame,
Grey, +2.0 Diopter
11522-00000-20
70071540127
3M™ Nuvo™ Eyewear, Tortoise Frame
Indoor/Outdoor Mirror Lens +2.5 Diopter
11379-00000-20
70071539616
3M™ BX™ Reader, Silver/Black Frame,
Grey, +2.5 Diopter
11473-00000-20
70071539939
3M™ BX™ Eyewear, Ocean Blue Frame,
Indoor/Outdoor Mirror +1.5 Diopter
11474-00000-20
70071539947
3M™ BX™ Eyewear, Ocean Blue Frame,
Indoor/Outdoor Mirror +2.0 Diopter
11475-00000-20
70071539954
3M™ BX™ Eyewear, Ocean Blue Frame,
Indoor/Outdoor Mirror +2.5 Diopter
3M Economy Eyewear
™
3M™ Virtua™ Safety Eyewear
3M™ Virtua™ Max Eyewear and Readers
3M™ Virtua™ Sport Eyewear
Virtua™ Max Safety Eyewear is all about versatility and value. Readers are available in
3 bi-focal magnification strengths: +1.5, +2.0, +2.5
Sporty and sleek, true athletic styling and wide side-to-side coverage makes
Virtua™ Sport Eyewear a great choice for workplace compliance.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
11509-00000-20
70071542966
3M™ Virtua™ Eyewear, Max Clear
Hardcoat Lens
11510-00000-20
70071542974
11511-00000-20
11512-00000-20
Stock Number
Description
11384-00000-20
70071539640
3M™ Virtua™ Sport Eyewear, Clear
Temple Clear Anti-Fog Lens
3M™ Virtua™ Max Eyewear, Clear
Anti-fog Lens
11385-00000-20
70071539657
3M™ Virtua™ Sport Eyewear, Clear
Temple Clear Hard Coat Lens
70071542982
3M™ Virtua™ Max Eyewear, Grey
Anti-fog Lens
11386-00000-20
70071539665
3M™ Virtua™ Sport Eyewear, Grey
Temple Grey Anti-Fog Lens
70071542990
3M™ Virtua™ Max Eyewear, Indoor/
Outdoor Grey Hardcoat Lens
11388-00000-20
70071539673
3M™ Virtua™ Sport Eyewear, Clear
Temple Indoor/Outdoor Hard Coat Lens
70071540184
70071540036
3M Virtua Eyewear, Clear Anti-fog
+1.5 Diopter
11542-00000-20
3M™ Virtua™ Sport Eyewear, Light
Blue Anti-Fog Lens
70071540192
70071540044
3M Virtua Eyewear, Clear Anti-fog
+2.0 Diopter
11543-00000-20
3M™ Virtua™ Sport Eyewear, Light
Blue Hard Coat Lens
11544-00000-20
70071540200
3M™ Virtua™ Sport Eyewear, Light
Amber Anti-Fog Lens
11545-00000-20
70071540218
3M™ Virtua™ Sport Eyewear, Light
Amber Hard Coat Lens
11742-00000-20
70071540960
3M™ Virtua™ Sport, Eyewear, Indoor/
Outdoor Grey Anti-Fog Lens (CSA)
11743-00000-20
70071540978
3M™ Virtua™ Sport, Eyewear, Indoor/
Outdoor Grey Hard Coat Lens (CSA)
Readers
11513-00000-20
11514-00000-20
11515-00000-20
70071540051
™
™
Product
™
™
3M™ Virtua™ Eyewear, Clear Anti-fog
+2.5 Diopter
Hearing, Head, Eye and Face Protection
The Virtua™ Safety Eyewear line combines outstanding style, protection and affordability. Features unisex styling and lightweight design.
3M™ Virtua™ V10 Protective Eyewear
Sport styling look. Adjustable temple lengths. Soft, adjustable nose bridge.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 standards
Product
Stock Number
Description
11722-00000-20
70071540796
3M™ Virtua™ V10 Eyewear,
Clear Hard Coat Lens
11724-00000-20
70071540812
3M™ Virtua™ V10 Eyewear,
Clear Anti-Fog Lens
For information on Prescription Eyewear see page 30.
25
Eye Protection
3M Economy Eyewear
™
3M™ KX™ Safety Eyewear
3M™ OX™ Safety Eyewear
Incorporates modern design and Hinge Clip technology for easy temple opening and
closing. Ideal for temporary workers or visitors.
“Over-the-glass” eyewear extends the view, increases comfort and provides custom
fitting and adjustability for prescription eyewear wearers.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards. Exceeds Military Vo test
regimen for high velocity impact protection.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
12150-00000-20
70071541174
3M™ KX™ Eyewear, Black Temple,
Clear Lens
Product
12155-00000-20
70071541182
3M™ KX™ Eyewear, Black Temple,
Clear DX Lens
Stock Number
Description
12159-00000-20
70071541190
3M™ OX™ Eyewear, Black Temple
Clear Lens
12166-00000-20
70071541216
3M™ OX™ 2000 Eyewear, Black
Secure Grip Clear DX Lens
3M™ Tour-Guard™ III Safety Eyewear
3M™ Zora™ Safety Eyewear
Tour-Guard™ Safety Eyewear is an economical choice when you need safety glasses for
visitors. Can be worn alone or the design allows it to fit over most prescription glasses.
Zora™ Eyewear is an outstanding, economical choice in safety. The fluid, contemporary
styling blends the elements of comfort and protection like no other. Better yet, the
affordable price is as attractive as the design.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
41110-00000-100
70071542784
3M 958 Tour-Guard III Eyewear,
Clear with dispenser box
41120-00000-100
70071542792
3M™ 958B Tour-Guard™ III Eyewear,
Clear Bulk
41200-00000-100
70071542800
3M™ 960 Tour-Guard™ III Eyewear,
Small Clear with dispenser box
41210-00000-100
70071542818
3M™ 960B Tour-Guard™ III Eyewear,
Small Clear Bulk
™
™
For information on Prescription Eyewear see page 30.
26
Product
Stock Number
Description
11400-00000-20
70071539723
3M™ Zora™ Eyewear, Clear Frame
Clear Hard Coat Lens
3M Safety Goggles
™
3M™ Maxim™ Goggles
Maxim™ Goggles blend style of form with the safety of function.
3M™ Maxim™ Splash Goggle
3M™ Maxim™ 2x2 Air Flow Goggle
Sleek design meant to complement most facial shapes, with an Over-The-Glass lens
for workers who wear prescription eyewear. The advanced DuoSoft Polymeric Shroud
ensures enhanced comfort at every “touch point”.
Features a modern, lightweight slim design with a nylon frame. Vented for comfort and
reduced fogging. Elastic headband for comfortable secure fit. Suitable for a number of
different applications where a versatile, comfortable goggle is required. Provides a good
fit for smaller faces.
Product
Stock Number
Description
40671-00000-10
70071542693
3M™ Maxim™ Splash Goggle, Clear DX
O-T-G Lens
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
40698-00000-10
70071521564
3M™ Maxim™ 2x2 Air Flow Goggle,
Clear, Anti-fog Lens, Black Strap
40699-00000-10
70071521572
3M™ Maxim™ 2x2 Air Flow Goggle,
Grey, Anti-fog Lens, Black Strap
Hearing, Head, Eye and Face Protection
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
3M™ Maxim™ 2x2 Air Seal Goggle
Revolutionary safety frame able to switch from temples to a headband in a few seconds. The
headband gives the possiblilty of comfortably wearing this low profile goggle with an earmuff.
A venting system has been designed to release heat and assist in fog reduction. Available in
choice of goggle only with interchangable temples/headband (40686/40687) or complete kit
with replacement lenses and carrying case (40678/40679).
Compliance: Meets ANSI Z87.1 Standards
Product
Stock Number
Description
40678-10000-10
70071523263
3M™ Maxim™ 2x2 Air Seal Goggle Kit
40679-10000
70071521481
3M™ Maxim™ 2x2 Air Seal Google Kit Retail Packaging
40683-00000
70071521499
3M™ Maxim™ 2x2 Air Seal Goggle,
Clear Anti-Fog Replacement Lens
40684-00000
70071521507
3M™ Maxim™ 2x2 Air Seal Goggle,
Grey Anti-Fog Replacement Lens
40685-00000
70071521515
3M™ Maxim™ 2x2 Air Seal Goggle,
Amber Anti-Fog Replacement Lens
40686-00000-10
70071542701
3M™ Maxim™ 2x2 Air Seal Goggle, Black
Frame, Clear Lenses, Strap, Temples
40687-00000-10
70071542719
3M™ Maxim™ 2x2 Air Seal Goggle, Black
Frame, Grey Lenses, Strap, Temples
40696-00000-10
70071542735
3M™ Maxim™ 2x2 Air Seal Goggle,
Black Frame, Clear Lenses, Strap,
Temples w/side Venting
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
27
Eye Protection
3M Safety Goggles
™
3M™ Lexa™ GoggleGear™ Safety Goggles
Converts Lexa™ lens into a Dust or Splash Goggle in just a snap with Easy-Change™ lenses.
3M™ GoggleGear™ Safety Goggles
3M™ Lexa™ Splash Safety Goggles
Seals out particulates and is comfortable for all day use. The polyurethane foam is easily
cleaned and is self-extinguishing. Lens provides a wider view of the work area than
traditional impact goggles and includes vent channels at top and bottom for improved
airflow and comfort. DX™ anti-fog hard coat guards against fogging, scratching, and static.
Weighs just 1.8 oz. The patented ellipsoidal Lexa™ lens extends the viewing range
further, even peripherally. Not bulky like other goggles, Splash GoggleGear™ has a
contoured, low profile design. A soft PVC shroud gently hugs the face and is indirect
vented to allow cooling air flow and help prevent fogging. The exclusive DX™ anti-fog
hard coat resists fogging, scratching, static, and most chemicals.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Stock Number
Description
16615-00000-10
70071542420
3M™ Gogglegear™ Safety Goggle,
Medium Clear Lens Black Frame
Product
16616-00000-10
70071542438
3M™ Gogglegear™ Safety Goggle,
Large Clear Lens Black Frame (CSA)
16644-00000-10
16617-00000-10
70071542446
3M™ Gogglegear™ Safety Goggle, W/
Strap Medium Clear Lens Std Bridge
16618-00000-10
70071542453
3M™ Gogglegear™ Safety Goggle, W/
Strap Large Clear Lens Std Bridge
3M™ Fectoggles™ Safety Goggles
Available in medium and large, Fectoggles™ combine the sight and comfort advantages
of spectacles with the impact protection of goggles.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
28
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Product
Stock Number
Description
16400-00000-10
70071542354
3M™ Fectoggle™ Safety Goggle, W/
Foam and Elastic Hbd Clear, Medium
16408-00000-10
70071542362
3M™ Fectoggle™ Safety Goggle,
W/Foam and Blk Adj Temple Clear,
Medium
16412-00000-10
70071542388
3M™ Fectoggle™ Safety Goggle, W/
Foam and Elastic Hbd Clear, Large
16420-00000-10
70071542396
3M™ Fectoggle™ Safety Goggle, W/
Foam and Blk Adj Temple Clear, Large
16645-00000-10
Stock Number
Description
70071542503
3M™ Lexa™ Splash Gogglegear™
Safety Goggle, Clear Shroud W/Lens,
Medium
70071542511
3M™ Lexa™ Splash Gogglegear™
Safety Goggle, Clear Shroud W/Lens,
Large
3M Safety Goggles
™
3M™ Centurion™ Safety Goggles
3M™ 452 Centurion™ Impact Safety Goggles
3M™ 454 Centurion™ Splash Safety Goggles
Offers direct ventilation for cooling comfort while offering impact protection.
Vertical, indirect-venting system designed to minimize fogging while providing protection
against splash liquide contaiminants.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
40300-00000-10
70071542552
3M™ 452 Centurion™ Impact Safety
Goggle Clear Lens
40301-00000-10
70071542560
Hearing, Head, Eye and Face Protection
Feature a wrap-around lens that is impact resistant and offers a wide-angle view for excellent peripheral vision. Vertical vent system promotes air
circulation over the lens surface to help reduce fogging. A wide back opening allows for wear over safety glasses and a wide nasal flare accommodates
most half-mask respirators.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
3M™ 452Af Centurion™ Impact Safety
Goggle Clear Anti-Fog Lens
Product
Stock Number
Description
40304-00000-10
70071542578
3M™ 454 Centurion™ Splash Safety
Goggle, Clear Lens
40305-00000-10
70071542586
3M™ 454Af Centurion™ Splash Safety
Goggle, Clear Anti-Fog Lens
3M™ 484 Splash Safety Goggles
Indirect venting helps minimize fogging and helps protect from certain airborne
particulates and chemical splash.
Compliance: Meets ANSI Z87.1 and CSA Z94.3 Standards
Product
Stock Number
Description
40802-00000-10
70071542743
3M™ 484BDX Splash Safety
Goggle, Clear
40815-00000-10
70071542750
3M™ 484B Chemical Splash Safety
Goggle, Clear
For information on Prescription Eyewear see page 30.
29
3M Prescription Safety Eyewear
™
Powerful
Protection
Proven Program
Establishing an Effective Safety Prescription Eyewear Program
We offer three critical components to help you administrate your program:
•
•
•
Control – Helping you control your program with regards to options allowed and cost per pair of eyewear.
Informed – Providing you with tools to keep your employees informed about the details of your safety
prescription eyewear program.
Instruct – Instructing the Eye Care Professionals (ECP) to follow the parameters of your program.
Let the 3M™ Prescription Eyewear team work
with you on the implementation and management
of your eyewear program
Here are some key reasons why you should work with us:
Reliable and Comprehensive Eye Protection
Eyewear Manufactured to Meet Current Z94.3 Guidelines
•Lenses – Latest Designs and Technology
•Great Selection of Frame Styles
•National Network of Eye Care Professionals
•Simplified, Competitive Pricing
•Canadian ISO 9001:2000 certified manufacturing facility
•
•
For more information please contact one of
our national team members:
Canada – 1 800 268-4031 (Excluding Quebec)
Quebec – 1 800 265-1840 x 1013
30
3M Head and Face Protection
3M™ Headgear for Replaceable Faceshields
•Complete
headgear and faceshield unit
•Meets ANSI
•Made
Z87.1 and CSA Z94.3
in U.S.A.
Product
Description
82500-00000
H4 Economy Pinlock Headgear
82501-00000
H8A Deluxe Ratchet Headgear
82502-00000
H18 Cap Mount Headgear
82516-00000
H10 Ratchet Headgear With Crown
•Say
Hearing, Head, Eye and Face Protection
3M™ Headgear System & Cap Mount Headgear
goodbye to metal snaps, cams or bands
•Features
a patented, unique system that allows window replacement in seconds
•Meets ANSI
•Moulded
•Made
Z87.1 and CSA Z94.3
replacement stock
in U.S.A.
Product
Description
82700-00000
W96 Clear Propionate Window
82701-00000
WP96 Clear Polycarbonate Window
82702-00000
WP96C Dark Green Polycarbonate
82525-00000
WP96B Medium Green Polycarbonate
82543-00000
WP98 Clear Polycarbonate, fits HCP8 Clear Chin Protector
82582-00000
WP96 Clear Polycarbonate Window
3M™ XLR8™ Hard Hats
•Universal
accessory slots for use with a wide variety of eye, face and hearing protection products
•Rugged, high-density
•Nylon
polyethylene shell for maximum protection
web suspension with full cushioned, washable foam brow pad
•Meets ANSI Z89.1 type 1, class G, E and C, and complies with OSHA regulations for industrial head protection
•
CSA Z94.1 Type 1 G & E
•Made
in U.S.A.
Product
Description
45963-00001
XLR8™ Hard Hat Yellow 6PT Pinlock
45964-00001
XLR8™ Hard Hat White 6PT Pinlock
45971-00001
XLR8™ Hard Hat Blue 6PT Ratchet
31
Hearing, Head, Eye and Face Protection
Head and Face Protection
3M™ Peltor™ Visors & Components for Hard Hat Assembly
•Snaps
easily into any hard hat with universal slots
•Brimless, lightweight
•Unique
protection against particles and liquids
linkage system for working and standby positions
•Assembled
and packaged in the U.S.A. from parts made in Sweden
Product
Description
P3EV/2
Hard Hat Attachment
V1A
Black Matte Metal Visor
V1B
Black Nylon Mesh Visor
V2A
Clear Acetate Visor
V2B
Green Polycarbonate Visor
V2C
Clear Polycarbonate Visor
V4D
MultiVisor™ System - Clear acetate anti-fog visor
V4F
MultiVisor™ System - Clear Polycarbonate Visor
3M™ LumberJack™ Systems
•Combination
•Exclusively
•NRR
head, face and hearing protection
designed for the Lumber and Agricultural industries
22dB
Product
Description
G414
LumberJack™ W/XLR8 6PT Ratchet, V1A H31P3E
GR1C
LumberJack™ Systems - Orange Rainshield
GR2B
LumberJack™ Systems - Visor Sealing
GR2F
LumberJack™ Systems - Rain Shield
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
32
Fall Protection
Harnesses
3M™ SafeLight™ Harness
•Universal
•Back
sized value harness
D-Ring
•Reference Attached
•310
Configuration Chart to Obtain Product Offering
lbs rated, meets ANSI standard and CSA Z259.10-06
Product
Description
10910FI
Single back D-ring, pass-thru buckles
10911FI
Same as 10910FI, with 2 side D-rings
10950FI
Single back D-ring, grommetted leg straps, pass-thru chest buckle
10951FI
Single back D-ring, 2 side D-rings, grommetted leg straps, pass-thru chest buckle
10910FI
3M™ Elavation™ Harness
•Reference Attached
•Quick
Configuration Chart to Obtain Product Offering
Connect Chest and Leg Connections
•Shoulders/Legs
•400
padding with quick torso adjustment
Fall Protection Safety Harnesses
•Breathable, cushioned
Comfort Pads and built in Lanyard clip
lbs rated, meets ANSI and CSA Z259-10.06
Product
Description
7510Q (L-XL)
Elavation™ Premium Harness, back D-ring, quick connect buckles
7511Q (L-XL)
Elavation™ Premium Positioning Harness, back & side D-rings, quick connect buckles
7512Q (L-XL)
Elavation™ Premium Positioning Harness, back & side D-rings, integrated tool belt, quick connect buckles
7550Q (L-XL)
Elavation™ Premium Harness, back D-rings, grommet, leg straps
7551Q (L-XL)
Elavation™ Premium Positioning Harness, back & side D-rings, grommet leg straps
7552Q (L-XL)
Elavation™ Premium Positioning Harness, back & side D-rings, integrated tool belt, grommet leg straps
7510Q (L-XL)
3M™ Feather Harness
•Original
tangle free design
•Reference Attached
•310
Configuration Chart to Obtain Product Offering
lbs rated, meets ANSI standard and CSA Z259.10-06
Product
Description
1050
Single Back D Ring, Grommet Leg Straps
1050F
Single Back D Ring, Front D Ring, Grommet Leg Straps
1051
Single Back D Ring, Side D Rings, Grommet Leg Straps
1051F
Single Back D Ring, Side D Rings, Front D Ring, Grommet Leg Straps
1052
Single Back D Ring, Side D Rings, Tool Belt, Grommet Leg Straps
1052F
Single Back D Ring, Side D Rings, Front D Ring, Tool Belt, Grommet Legs
1053F
Single Back D Ring, Front D Ring, Shoulder D Rings, Grommet Legs
1054F
Single Back D Ring, Side D Rings, Front D Ring, Shoulder D Rings, Grommet Legs
1010
33
Fall Protection
Harnesses, Lanyards & Retractable Lifelines
3M™ Saturn™ Harness
•Legacy
sizing still available
specifically for welders
•Dupont Poly-Nomex™ web construction resists 700°F
•310 lbs rated, meets ANSI standard and CSA Z259.10-06
•Single Back D-Ring, Side D-Rings, Grommet Legs, Pass Thru Chest
•Designed
Product
Description
1020
Single back D-Ring, pass-thru buckles
1021
Single back D-Ring, 2 side D-Rings, pass-thru buckles
1030
Single back D-Ring, grommet leg straps, pass-thru chest buckle
1031
Same as 1030, with 2 side D-Rings
1321
Single back D-Ring, 2 side D-Rings, grommet waist belt and leg straps
1020
3M™ Ameba Harness
•Non
Elastic, Helical Web for added comfort and support
Mesh Back Pad
•Conforms to the wearer for elusive fit and feel
•310 lbs rated, meets ANSI standard and CSA Z259.10-06
•Reference below configuration chart to obtain product offering
•Breathable
Product
Description
1410Q
Single Back D-Ring, Quick Connect Leg and Chest Straps
1410FQ
Single Back D-Ring, Front D-Ring, Quick Connect Leg and Chest Straps
1411Q
Single Back D-Ring, Side D-Rings, Quick Connect Leg and Chest Straps
1411FQ
Single Back D-Ring, Side D-Rings, Front D-Ring, Quick Connect Leg and Chest Straps
1412Q
Single Back D-Ring, Side D-Rings, Tool Belt, Quick Connect Leg and Chest Straps
1412FQ
Single Back D-Ring, Side D-Rings, Front D-Ring, Tool Belt, Quick Connect Leg and Chest Straps
1413FQ
Single Back D-Ring, Front D-Ring, Shoulder D-Rings, Quick Connect Leg and Chest Straps
1414FQ
Single Back D-Ring, Side D-Rings, Front D-Ring, Shoulder D-Rings, Quick Connect Leg and Chest Straps
1411
Product Code Grid
First Digits
Family
34
Third Digit
Buckle Option
1
Fourth Digit/Alpha
Hardware Configuration
5
0
0F
1
1F
2
75 Elavation
QC
14 Ameba
Pass Thru Grommet
10 Feather
Pass Thru Grommet
109 SafeLight
Pass Thru Grommet
Grommet
2F
Back Back Back Back Back
Front Side
Front Side
Side
D-ring
All QC
Extender Buckles
3F
4F
Back
Back
Back
Front
Front
Front
Position Belt Side
E
Q
N/A*
N/A*
Shoulder Side
Position Belt
Back
Back/Front
Back/Side
Back/Front/Side
Back/Side/Belt
Back/Front/Side/Belt
0
0F
1
1F
2
2F
Shoulder
Back/Front/Shoulder Back/Front/Side/Shoulder
3F
4F
Web Lanyard (4' and 6' Available)
•1"
nylon webbing with double locking snap hooks and SafeStop™ Absorber
•Meets ANSI
•Max Arrest
•310
z3591.1-2007 standards for 3600 lb. connector gates
Dist - 42", Max Arrest Force < 900 lb.
lbs rated, meets ANSI and CSA Z259.11-05
Product
Description
209512
Single leg, 6' web, double locking snaphook
209512-0241
Single back Single leg, 6' web, 2 3/4" rebar snaphook
209550
Dual leg (100% tie-off), 6' (each leg) nylon web, shock pack w/ clear UV resistant plastic
209550-0241
Dual leg (100% tie-off), 6' web, 2 3/4" rebar snaphooks
209512
•Smarter, safer, stronger. Reload™ offers
less service downtime as it is field serviceable.
Product
Description
REW-7
Reload™ 7' Web Retractable Lifeline
REW-12
Reload™ 12' Web Retractable Lifeline
REW-23
Reload™ 23' Web Retractable Lifeline
REC-23
Reload™ 23' Cable Retractable Lifeline, also available in Stainless Steel
REC-30
Reload™ 30' Cable Retractable Lifeline, also available in Stainless Steel
REC-40
Reload™ 40' Cable Retractable Lifeline, also available in Stainless Steel
REC-50
Reload™ 50' Cable Retractable Lifeline, also available in Stainless Steel
Sealed Reload™ Retractable
•Protective
•Constant
•Modular
Fall Protection Safety Harnesses
Reload™ Retractable
New!
REW-12
seal provides ingress rating (IP) of 69
Force™ energy absorber is coiled stainless steel which requires no adjustments
design allows rapid lifeline replacement, Constant Force™ energy absorber replacement
•Don’t
Rebuild, Reload™
•ANSI
Z359.1-1999, CSA, Z259.2.2-98
Product
Description
SREC-30
30' Sealed Reload™, Galvanized Cable/Hook
SREC-50
50' Sealed Reload™, Galvanized Cable/Hook
SREC-85
85' Sealed Reload™, Galvanized Cable/Hook
SREC-130
130' Sealed Reload™, Galvanized Cable/Hook
SREC-30-SS
30' Sealed Reload™, Stainless Steel Cable/Hook
SREC-50-SS
50' Sealed Reload™, Stainless Steel Cable/Hook
SREC-85-SS
85' Sealed Reload™, Stainless Steel Cable/Hook
SREC-130-SS
130' Sealed Reload™, Stainless Steel Cable/Hook
SREC-85
35
™
Comfortable
Protection
Solutions
Powered
Supplied
Air Coveralls
Protective
Monitoring
Systems
Speedglasand
Anchor Points, Rescue Systems & Rope Grabs
Anchor Points
•Variety
of anchor points, both for industrial and roofing applications
Product
Description
4550-U
Heavy Duty Cross Arm Strap designed to wrap around structures to give you 5000 lbs. anchor point
4000
Reusable Roof Anchor Point
4004
D Bolt Anchor (Permanent)
4075
Safeclaw, requires 3/4" hole, 3" deep, easy to remove / reuse
4075
Innova™ Xtirpa™ Confined Space Rescue Products
•Simplified
two-piece gate and davit arm that enables easy one-man setup in under 3 minutes
davit arm and modular add-on components to give expanded use in a variety of environments
•Made from lightweight material that gives you exceptional strength
•Versatile
Product
Description
IN-2210
Xtirpa™ Davit Arm
IN-2108
Safety Barricade 42"
IN-2003
Davit Arm Mast
IN-2118
H-Base Mast Adaptor
IN-2005
Floor Mount Mast Adaptor
IN-2006
Flush Floor Mast Adaptor
CON-205G-50
3-Way SRL Retrieval Device with Adaptor Hardware
CON-142G
65' Winch with Adaptor Hardware
Products manufactured by
Innova Public Utility Products Inc.
Rope Grabs
•Alternate
to lanyards and retractables
Product
Description
129
Equipped with Anti Panic feature to meet CSA Z259.2.1-98, fits standard 5/8" lifeline stainless steel.
Meets ANSI Z359.1
3M™ Roofing Kits
•Also
36
available in other combinations
Product
Description
20507
20507 Kit Contains: 2 ea 4651X roof anchor; 1 ea (10910FI) 3M™ SafeLight™ harness; 1 ea 0221-50
Lifeline; 1 ea 5000 bucket; 1 ea 209510 shock absorbing lanyard; 1 ea CSA 129 Rope Grab
Covering
More
of
3M Protective Clothing
™
New!
Designed for the demands of the Industrial Workplace. Harmful dust. Light liquid splashes and
sprays. Biological contaminates. These are just some of the dangers inherent in today’s industrial
workplace. 3M introduces a line of quality disposable coveralls to help protect at-risk workers.
3M™ Protective Coveralls feature enhanced safety construction and material technologies that allow lightweight comfort. Used for a variety
of applications, 3M™ Protective Coveralls offer quality and reliability: enabling workers to maneuver freely, and do their jobs efficiently.
3M™ 4510 Protective Coveralls
Entry level, splash and dust protection
•Constructed of laminated polypropylene having low-linting properties
•Elastic hood, waist and ankles for convenient safe wear and movement
•Two way zipper with storm flap for extra convenience and protection from contaminants
•Anti-static for increased protection in critical areas**
•Sizes M-4XL
3M™ 4520 Protective Coveralls
Entry level protection with comfort
• Breathable polypropylene for reduced heat stress and comfortable wear
•Three-piece elastic hood for improved fit with other PPE
•Two-way zipper with storm flap for extra convenience and protection from contaminants
•Anti-static for increased protection in critical areas**
•Sizes M-4XL
3M™ 4530 Protective Coveralls
Protective Coveralls
Breathable protection with limited flame resistance
• Breathable material for reduced heat stress and comfortable wear
•Good protection against dusts and light liquid splashes CE Type 5/6
•Three-piece elastic hood for improved fit with other PPE
•Reinforced gusset for increased robustness
•Knit cuffs with elasticated waist and ankles for increased wearer comfort and freedom of movement (cuffs do not offer FR protection)
•Designed for use as secondary FR protection
•Coverall meets EN 533 Index 1 and must be worn over EN 533 Index 2 or 3 garments and not worn next to skin when flame
resistance is needed
•Two-way zipper with re-sealable storm flap
•Anti-static for increased protection in critical areas**
•Sizes M-4XL
3M™ 4540+ Protective Coveralls
Enhanced performance with comfort built-in
•Constructed of low-linting, non-woven, laminated microporous material with anti-static coating on both sides
•Three-piece elastic hood for improved fit with other PPE
•Breathable back panel for improved air circulation and reduced heat stress*
•Two-way zipper with re-sealable flap for extra convenience and protection from contaminants
•Knitted cuffs for increased wearer comfort
•Anti-static for increased protection**
•Reinforced gusset for increased robustness
•Sizes M-4XL
* Breathable panel is less protective, if splash protection is needed for the back, consider the 4565
3M™ 4565 Protective Coveralls
Excellent protection and durability
•Constructed of bi component, polyethylene/polypropylene material
•Three-piece elastic hood for improved fit with other PPE
•Reinforced gusset for increased robustness
•Two way zipper with sealable flap
•Knitted cuffs for increased wearer comfort
•Anti-static for increased protection**
** All apparel must be suitably grounded for anti-static treatment to be effective. In all cases,
•Taped seams across the suit for increased protection
before selection of the most appropriate PPE, a risk assessment should be carried out by a
•Sizes M-4XL
competent person knowledgeable of the actual working conditions and limitations of PPE.
The Protective Coverall information shown is only an outline. It should not be used as the only means for selecting protective clothing. Details regarding performance and limitations are set out on the packaging and user instructions. Before using any protective
clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional or 3M – www.3M.ca/safety. Please note that the personal protective equipment (PPE)
shown highlight some of the products which may be considered. Selection of the most appropriate PPE will depend on the particular situation and should be made only by a competent person knowledgeable of the actual working conditions and the limitations of PPE.
37
Visibility & Insulation Solutions
3M Scotchlite Reflective Material and Thinsulate Insulation
™
™
™
3M™ Scotchlite™ Reflective Material
•Typical applications are workwear, safety vests, uniforms, accessories
•Meets the requirements for CSA Z96-09 and many other standards (certificates available upon request)
•Available in sew-on fabric or transfer film (heat transfer equipment is required)
38
Product
Description
9100-9187-50.8X100(6)
Yellow/Silver/Yellow Integrated Trim, Industrial Wash, Flame Resistant,
Sew-on, Roll Size 50.8 mm x 100 m
Product
Description
8900-8940-50.8X100(6)
Silver, Industrial Wash, Flame Resistant, Sew-on, Roll Size 50.8 mm x 100 m
9900-9920-50.8X100(6)
Silver, Industrial Wash, Sew-on, Roll Size 50.8 mm x 100 m
8900-8925-50.8X100(6)
Silver, Home Wash, Sew-on, Roll Size 50.8 mm x 100 m
8700-8710-50.8X100(6)
Silver, Heat Transfer Film, Roll Size 50.8 mm x 100 m
Product
Description
5510-50.8X100(6)
Silver “Comfort Trim”, Improved Moisture Vapour Transmission, Home Wash,
Heat Transfer Film, Roll Size 50.8 mm x 100 m
Product
Description
3150A-50.8X50
SOLAS Safety of Life at Sea, silver with pressure sensitive adhesive for life
jackets, rafts, etc., roll size 50.8 mm x 50 m
6755-50.8X50(6)
SOLAS Safety of Life at Sea, silver sew-on for flexible, coated fabrics,
roll size 50.8 mm x 50 m
Visible, Durable & Comfortable
Product
Description
8830-1X4(500)
Reflective Silver Strips. 1 in x 4 in, 10 Strips/Sheet, 50 Sheets/Case
8887-1X4(500)
Reflective Fluorescent Lime-Yellow Strips. 1 in x 4 in,
10 strips/sheet, 50 sheets/case
Product
Description
SL3
Reflective Arm Bands, 1 in x 15 in, 500 Bands/case (bulk)
Visibility and Insulation Solutions
Thermal Insoles New!
3M™ Thinsulate™ Insulation
•Typical applications are workwear, outerwear, sportswear, accessories
•Retains insulating ability even under damp conditions
•Thin and compressible; Machine wash or dry-clean
Product
Description
CDS70-60X198
Thin, Breathable, Moisture-Resistant, Clo Value 1.0, Roll Size 60 in x 198 yds
CDS150-60X98
Thin, Breathable, Moisture-Resistant, Clo Value 1.9, Roll Size 60 in x 198 yds
UDS200-60X50
Mid-Loft, Breathable, Moisture-Resistant, Clo Value 3.0, Roll Size 60 in x 50 yds
Product
Description
THMW 4-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 3-4, Women’s size 5-6
THMW 6-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 3-4, Women’s size 5-6
THMW 8-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 5-6, Women’s size 7-8
THMW 10-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 7-8, Women’s size 9-10
THMW 12-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 9-10, Women’s size 11-12
THMW 14-CON-CS
Designed for comfort, made for warmth. For use in footwear with a
removable insole. Men’s size 11-12, Women’s size 13-14
39
Maintenance Free Respirators
3M Filtering Facepiece Respirators
™
Features of 3M Filtering Facepiece Respirators
From foundries to wood working, workers in many industries require
protection from airborne particles such as dust, fibre, mist, fume and
biological aerosols. Sweeping, sanding, grinding, sawing, bagging, welding
– each creates a unique set of conditions, especially given environmental
considerations such as heat and humidity. 3M’s wide selection of filtering
facepiece respirators helps you match the respirator to your environment.
3M uses a variety of innovative technologies and features to help you meet
your protection and comfort needs. They are all NIOSH 42CFR84 approved
and include the following features:
•Lightweight
•Adjustable
•Variety
•Some
•Soft
and comfortable
noseclips
of strap and attachment types
available with carbon filter material for nuisance level relief¹
inner materials
•Compatible
with most eye and hearing protection
•All
maintenance free respirators are constructed with advanced
electret media
Featured Technologies
Cool Flow Exhalation Valve. Patented
one-way valve for easy exhalation and cool,
dry comfort.
M-noseclip. Patented noseclip adjusts easily
for fewer pressure points and greater comfort.
Faceseal. Soft and secure, conforms closely to
face for additional comfort.
Advanced Electret Media. Patented filter media
with electrostatically charged microfibers help
make breathing easier and cooler.
Carbon filter material. Carbon filter media
provides relief against odours, vapour and other
gaseous containments for greater wearer comfort.
For nuisance level relief only1.
1
40
3 M recommended for relief against nuisance level acid gas or organic vapours. Nuisance level organic vapour and
acid gas refers to concentrations not exceeding applicable government occupational exposure limits.
Cake-resistant filter media. Patented filter media
with specifically designed filter layers for welding
applications provide longer respirator life and
easier breathing.
Welding Web. Unique filter media incorporating
protective layers designed to be flame resistant as
demonstrated per ASTM D2859-96.
(Not a substitute for a faceshield)
Adjustable buckle straps. A single tug helps
provide a comfortable, secure fit.
P-series filter. Patented Advanced Electret Media,
appropriate for prolonged use in both oil and
non-oil containing environments.
Comfort
New!
Non-valved N95 Respirators: Suggested Applications:
Sweeping, sanding, grinding, sawing and bagging in
a non-oil environment. Also suggested for pandemic
stockpiling/business continuity planning.
3M™ VFlex™ Particulate Respirators 9105/9105S (N95)
• Adjustable
Noseclip to provide custom fit
Pleats for easier breathing and talking
• 3M Patented Filter Media for easier breathing
• Flat-fold Convenience
• N95 approved
• 9105S designed for people with smaller faces
• V-shaped
8210 (N95)
• Features welded strap attachment, soft nose foam and adjustable
noseclip to help provide a custom fit and secure seal
• A breakthrough in comfort and convenience
• This three-panel respirator with innovative design helps
provide comfortable, reliable worker protection against non-oil
based particles
• Individually packaged
Maintenance Free Respirators
9210 (N95)
8110S (N95)
• Is designed for people with smaller faces
• It helps provide worker protection against certain non-oil
based particles
• It is comfortable and easy to use which helps promote greater
worker acceptance and increased wear time
8210Plus (N95)
• Builds on all of the features that have made the 8210 one of the
most widely used N95s in industry
• The PLUS offers comfortable braided
headbands and that won’t tangle in hair
8200 (N95)
9010 (N95)
8510 (N95)
• Designed to help provide quality, reliable worker protection against
certain non-oil based particles in a convenient, flat fold design
• Each respirator is individually packaged to offer convenient storage
and portability
• Individually packaged
Flags denote country of manufacture, however all products may include globally sourced components.
IMPORTANT: All 3M™ products shown in this catalogue must be used in accordance with the requirements of the authority having
jurisdiction in your region and/or CSA standard Z94.4 and the user instructions, warnings, and limitations accompanying each product.
• Designed to help provide reliable protection against certain non-oil based particles
•Soft Inner Material
•Fluid resistant to highest level*
• Braided Comfort Straps
• Adjustable M-Noseclip
• Patented Filter Media
• N95 Approved
*Tested according to ASTM F1862. 8510 is approved by
NIOSH but is not approved by the FDA as a surgical mask.
41
Maintenance Free Respirators
Comfort Plus
N95 Respirators: Suggested Applications: Grinding, bagging, sanding and sweeping. Also suggested for extended wear time, hot/humid conditions,
other dusty operations and pandemic stockpiling/business continuity planning. Comfort Plus respirators all feature the patented 3M™ Cool Flow
Exhalation Valve.
8511 (N95)
9211 (N95)
•Is uniquely designed to help provide protection against certain
non-oil based particles
•This three-panel respirator with innovative design is ideally suited for
work settings that involve heat, humidity or long periods of wear
•It is ideally suited for work settings that involve heat, humidity or long
periods of wear
•Individually packaged
100 Class Respirators: Ideal when local regulatory agencies require a
class 100 filter. Appropriate for pharmaceutical manufacturing.
8293 (P100)
8233 (N100)
• Is well suited for those who want NIOSH’s highest rated filtration
efficiency in a maintenance free respirator
•Is
• It provides a minimum filter efficiency of 99.97% against oil
base particles
•It
• Individually packaged
•Individually
Flags denote country of manufacture, however all products may include globally sourced components.
IMPORTANT: All 3M™ products shown in this catalogue must be used in accordance with the
requirements of the authority having jurisdiction in your region and/or CSA standard Z94.4 and the
user instructions, warnings, and limitations accompanying each product.
42
well suited for those who want NIOSH’s highest rated filtration
efficiency in a maintenance free respirator
provides a minimum filter efficiency of 99.97% against
non-oil based particles
packaged
Welding
Welding and Metal Pouring: Suggested Applications: Welding, torch
cutting, brazing, soldering. Welding respirators all feature the patented
3M™ Cool Flow Exhalation Valve.
8214 (N95)
8212 (N95)
•Is designed for applications such as welding, soldering and other
operations where metal fumes may be present including those
with ozone* and nuisance level organic vapours**
•Features the 3M™ Cool Flow Exhalation Valve, cake-resistant filter
media and fully adjustable straps
•Additional Applications: Metal pouring, working with stainless,
galvanized or aluminium
•Includes faceseal
•Additional Applications: Metal pouring
8514 (N95)
8512 (N95)
•Is designed for applications such as welding, soldering and other
operations where metal fumes are present including those with
ozone* and nuisance level organic vapours**
•Features the 3M™ Cool Flow Exhalation Valve, cake-resistant filter
media, nose foam and fully adjustable noseclip and straps
•Includes faceseal
•Additional Applications: Metal pouring, working with stainless,
galvanized or aluminium
Maintenance Free Respirators
•Includes faceseal
•Includes faceseal
•Additional Applications: Metal pouring
8515 (N95)
•An economical option for welders featuring the 3M™ Cool Flow
Exhalation Valve, adjustable M-noseclip, and braided headband to
help provide a custom fit and secure seal
*3M recommended for ozone protection up to 10X OSHA PEL or applicable government
occupational exposure limits, whichever is lower. Not NIOSH approved for ozone.
**3M recommended for relief against nuisance level acid gas or organic vapours. Nuisance level organic vapour
and acid gas refers to concentrations not exceeding applicable government occupational exposure limits.
Flags denote country of manufacture, however all products may include globally sourced components.
IMPORTANT: All 3M™ Products shown in this catalogue must be used in accordance with the
requirements of the authority having jurisdiction in your region and/or CSA standard Z94.4 and the
user instructions, warnings, and limitations accompanying each product.
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
43
Maintenance Free Respirators
Specialty
Non-valved Specialty Respirators: Suggested Applications: Grinding,
bagging, sanding, sweeping in oil and non-oil environments and other
dusty operations.
Valved Specialty Respirators: Features the patented 3M™ Cool Flow
Exhalation Valve. Suggested for extended wear time, hot/humid conditions.
8247 (R95)
8577 (P95)
• Is
• Is designed to help provide comfortable, reliable worker protection
against certain oil and non-oil based particles including those
present with nuisance levels of organic vapours* such as solvents,
degreasers and resins
designed to help provide comfortable protection against certain oil
and non-oil based particles including those present with nuisance
levels of organic vapours*, such as solvents, degreasers and resins
• Additional Applications: Foundry
operations, lab settings, agriculture,
petrochemical manufacturing and undercoating where particles and
nuisance levels of organic vapours* may be present
Additional Applications: Foundry operation, lab settings, agricultural,
petrochemical, manufacturing
8246 (R95)
8576 (P95)
• Helps
•
Is designed to provide comfortable, reliable worker protection
against certain oil and non-oil based particles including those
present with nuisance levels of acid gases* such as sulphur dioxide,
hydrogen fluoride, and/or chlorine
•
Additional Applications: Glass etching, chemical processing, paper
processing, aluminum smelting and brewing operations
provide protection against certain oil and non-oil based
particles including those present with nuisance levels of acid gases*
such as sulphur dioxide, hydrogen fluoride, and/or chlorine
• Additional Applications: Glass
etching, chemical processing, paper
processing, aluminum smelting and brewing operations where
particles and nuisance levels of acid gases* may be present
8240 (R95)
8271 (P95)
• Is
•
Combines P-series versatility with exceptional comfort and fit
•
An excellent choice for those who have work environments that may
contain oil aerosols
designed to help provide protection against certain oil and non-oil
based particles
• Features
a collapse resistant shell for increased durability
• Additional Applications: Grinding, sanding, sweeping, machining
other dust producing/oily operations
and
*3M recommended for relief against nuisance level acid gas or organic vapours. Nuisance level organic vapour
and acid gas refers to concentrations not exceeding applicable government occupational exposure limits.
44
•
Flags denote country of manufacture, however all products may include globally sourced components.
IMPORTANT: All 3M™ Products shown in this catalogue must be used in accordance with the requirements of the
authority having jurisdiction in your region and/or CSA standard Z94.4 and the user instructions, warnings, and
limitations accompanying each product.
Product Preference Selector
Use the selector below to identify which respirator may be preferred for increased worker comfort.
What type of particles are in your environment?
Oil and Non-oil
Non-oil
R- or P-Series Respirators
N-Series Respirators
Does your local Regulatory Agency
require the use of a class 100 filter?
Will the respirator be used in a substance
specific or welding application?
No
Will the respirator be used for
light duty or short duration work?
Yes
Yes
Class 100 Filter required?
No
Yes
No
Is the environment hot and humid or
is additional worker comfort desired?
No
No
Yes
Is nuisance level
OV/AG reduction
preferred?
Is nuisance level
OV/AG reduction
preferred?
No
Yes
Yes
AG
OV
AG
8200
No
Welding
Is the environment
hot and humid or
is additional worker
comfort desired?
No
Yes
OV
9210
8576
Yes
No
Is a face
seal preferred?
Is a folded
product preferred?
No
8511
8210Plus
8247
Is ozone* or nuisance level
OV reduction preferred?
Yes
Is a folded
product preferred?
8210/8110s
8246
Maintenance Free Respirators
8233
8293
Yes
No
8214
8514
Yes
9211
9105
9105S
Is a face seal preferred?
Yes
No
8212
8512
8577
8510
8240
8271
8515
*3M recommended for ozone protection up to 10X OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for ozone.
45
Maintenance Free Respirators
Respirator Features
3M™ Maintenance Free Particulate Respirators
Product#
Classification/
Packaging
Suggested Applications
3M™ Cool
MFlow Valve Noseclip
FaceSeal
Advanced Carbon
Cake
Adjustable Welding APF*
Electret
Filter Resistant
Straps
Web
Media
Material Media
Dusty Conditions
8110S
(Small)
N95
20 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging
X
10
8200
N95
20 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging
X
10
8210
N95
20 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging,
available in small 8110S
X
10
8210Plus
N95
20 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging
with comfort braided
headbands
X
10
8240
R95
20 each/box
8 box/case
Grinding, sanding and
other dusty/oily operations
X
10
8246
R95
20 each/box
8 box/case
Glass etching, chemical
processing, paper
processing, brewing,
aluminum smelting1
X
8271
P95
10 each/box
8 box/case
Grinding, sanding,
machining and other
dusty/oily operations
8510
N95
20 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging,
available in small 8110S
8511
N95
10 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging,
hot/dusty operations
9105
9105S
N95
50 each/box
8 box/case
Sweeping, sanding,
grinding, sawing, bagging
9211
N95
10 each/box
12 box/case
Sweeping, sanding,
grinding, sawing, bagging,
hot/dusty operations
9210
N95
20 each/box
12 box/case
Sweeping, sanding,
grinding, sawing, bagging
X
X
AG
X
X
10
X
X
10
X
X
10
X
10
X
10
X
10
X
Important
All 3M Filtering Facepieces are NIOSH approved respirators. Before using, you must determine the following:
I. The types of contaminants for which the respirator is being selected and exposure time.
II.The concentration level of the contaminant(s). Do not use for particle concentrations that exceed 10 times the applicable government occupational exposure limits.
III.Whether the respirator can be properly fitted to the wearer’s face. Do not use with beards, or other conditions that prevent a good seal between the face and the sealing surface of the respirator.
IV.Before required use of filtering facepiece respirators, a written respiratory protection program must be implemented, meeting all the requirements of the authority having jurisdiction in your region and/or CSA
standard Z94.4 including medical evaluation, training, and fit testing.
46
10
Respirator Features
Product#
Classification/
Packaging
Suggested Applications
3M™ Cool
MFlow Valve Noseclip
FaceSeal
Advanced Carbon
Cake Adjustable Welding APF*
Electret
Filter Resistant Straps
Web
Media Material Media
Dusty Conditions/Nuisance Odours
8247
R95
20 each/box
6 box/case
Foundry operations, labs,
agriculture, petrochemical,
undercoating2
8576
P95
10 each/box
8 box/case
S ame as 8246, plus hot
operations1
X
8577
P95
10 each/box
8 box/case
Same as 8247, plus hot
operations2
X
X
OV
10
X
X
AG
10
X
X
OV
10
8212
N95
10 each/box
8 box/case
8214
N95
10 each/box
8 box/case
8512
N95
10 each/box
8 box/case
8514
N95
10 each/box
8 box/case
8515
N95
10 each/box
8 box/case
Welding, metal cutting/
pouring, grinding, sanding,
and other dusty/hot
operations
Welding, metal cutting/
pouring, grinding,
sanding, foundry,
labs, petrochemical,
undercoating 3
Welding, metal cutting/
pouring, grinding, sanding,
and other dusty/hot
operations
Welding, metal cutting/
pouring, grinding,
sanding, foundry,
labs, petrochemical,
undercoating 3
Welding, metal cutting/
pouring, grinding, sanding,
and other dusty/hot
operations
X
X
X
X
X
X
X
X
X
X
X
X
OV
OZ
OV
OZ
X
X
X
10
X
X
X
10
X
X
X
10
X
X
X
10
X
10
X
Maintenance Free Respirators
Welding and Metal Pouring
Class 100
8233
N100
1 each/bag
20 bag/case
Appropriate for
pharmaceutical
manufacturing
X
X
X
X
10
8293
P100
1 each/bag
20 bag/case
Appropriate for
pharmaceutical
manufacturing
X
X
X
X
10
*APF = Assigned Protection Factor.
†
3M recommended for relief against nuisance level acid gas or organic vapours. Nuisance levels are less than the applicable government occupational exposure limits.
3M recommended for nuisance level acid gas relief.
3M recommended for nuisance level organic vapour relief.
3 3M recommended for up to 10x OSHA PEL of ozone or applicable government occupational exposure limits, which ever is lowest, and nuisance level organic vapour relief.
1
2
47
Ordering Information
Product Ordering Information
NIOSH
Class
Stock Number
Qty/
Box
Boxes/
Case
Case
Qty
8240
R95
70-0708-4386-0
20
6
120
160
8246
R95
70-0707-5771-4
20
6
120
160
8247
R95
70-0707-5772-2
20
6
120
8
160
8271
P95
70-0707-1083-8
10
8
80
10
8
80
8576
P95
70-0707-5793-8
10
8
80
XH-0038-1029-4
50
10
500
8577
P95
70-0707-5794-6
10
8
80
70-0708-4339-9
20
12
240
Welding
N95
70-0715-6389-7
50
8
400
8212
N95
70-0707-0899-8
10
8
80
N95
70-0715-6388-9
50
8
400
8214
N95
70-0707-9953-4
10
8
80
8512
N95
70-0708-4387-8
10
8
80
NIOSH
Class
Stock Number
Qty/
Box
Boxes/
Case
Case
Qty
8110s
N95
70-0707-5707-8
20
8
160
8200
N95
70-0712-8805-7
20
8
8210
N95
70-0706-1439-4
20
8
8210Plus
N95
70-0710-9189-9
20
8510
N95
70-0715-4475-6
9010
N95
9210
N95
9105
9105S
Model
Comfort
Model
Specialty
Comfort Plus
8511
N95
70-0707-5755-7
10
8
80
8514
N95
70-0708-4388-6
10
8
80
9211
N95
70-0708-4340-7
10
12
120
8515
N95
70-0708-9002-8
10
8
80
8233
N100
70-0707-0901-2
1
20
20
8293
P100
70-0707-5747-4
1
20
20
100 Class
www.3m.ca/safety
Visit our website to find more information on:
Training and Tools • Tech Bulletins • Where to Buy • MSDS • What’s New
3M Worldwide, World Class
Warning
3M develops, manufactures and markets over 60,000 different consumer,
commercial, industrial and health care products. We have manufacturing
operations in 60 countries and do business in more than 200 countries.
3M can help you achieve corporate goals, meet and exceed government
standards, simplify and improve the lives of your employees, and
contribute to a safe, healthy and sustainable work environment.
These respirators help reduce exposures to certain airborne
particulates. Before use, the wearer must read and understand the
User Instructions provided as a part of the product packaging. A written
respiratory protection program must be implemented meeting all the
requirements of the authority having jurisdiction in your region and/
or CSA Standard Z94.4 including training, fit testing and medical
evaluation. Misuse may result in sickness or death. For proper use, see
package instructions, supervisor, or call 3M OH&ESD Technical Service
in Canada at 1-800-267-4414.
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
48
Legendary
Quality,
Proven Durability
Select the 3M Speedglas Welding Helmet and
ADF Combination that’s Right for You
™
MSLP
Price
Entry ™
Mid-Range Premium
$600
$400
Speedglas™
$500
9100X
$300
Super Light
(SL)
100V Graphics
$200
9100V
100V Black
100F Black
0
Value
Application Guide
Optimized
100F
100V/100V Graphics
Suitable
SL
9100V
Not Recommended
9100X
9100XX
MMAW (Electrode)
MIG/Mag
TIG (>10A)
TIG (1A – 10A)
Plasma (Welding and Cutting)
Risk for Hidden Arc
Tack Welding
Grinding
49
3M Speedglas Auto-Darkening Filter (ADF) Specifications
™
™
Speedglas™ 100
Super Light (SL)
Speedglas™ 9100
Viewing Area
1.73 x 3.66 in. (44 x 93 mm)
1.68 x 3.57 in. (91 x 43 mm)
1.8 x 3.7 in. (44 x 93 mm) – 9100V
2.1 x 4.2 in. (54 x 107 mm) – 9100X
2.8 x 4.2 in. (73 x 107 mm) – 9100XX
SideWindows*
Not available
Not available
Available with or without
Exhalation Vents*
Not available
Not available
Standard on all helmets
Dark State
Options
Shade 10 (Black helmet)
Shade 11 (Black helmet)
Shades 8 – 12 (Black or Graphic
helmet)
Shades 8 – 12
Shades 5, 8, 9 – 13 (variable)
on all ADF models
Light State
Shade 3
Shade 3
Shade 3
Weight
(Complete
Assembly
in Ounces)
Black – 15
With Graphics – 16
13
18.0 (18.9 with SideWindows) – 9100V
18.3 (19.2 with SideWindows) – 9100X
19.2 (20.1 with SideWindows) – 9100XX
None
ADF turns on and off automatically
Grinding, Tacking*, Lock-in Dark State
0.1
Less than 0.15
0.1
1500
1500
2800 – 9100V
2500 – 9100X
2000 – 9100XX
3 levels on the Shades 8 – 12 variable
lens (Black or Graphic helmet) only
4 levels
5 levels on all ADF models
TIG Rating
TIG >10 amps – 100V
Limited TIG – 100F
> 1 Amp
> 1 Amp
Warranty
2 years
2 years
2 years
Part number: 07-0680-00
Part number: 05-0680-00
Built in
2
2
3
Special Modes
Switching Speed
(Milliseconds)
Battery Life
(Hours)
Sensitivity Modes
Cheater Adapter
Number of
Sensors
*Patented features — ONLY available on a 3M™ Speedglas™ Welding Helmet
Certified to CSA Z94.3 Standard.
3M™ Speedglas™ 9100 Head Suspension
Designed for Optimal Comfort
50
• Less pressure on head
• Self-adjusting headband
• Increased helmet stability
• Articulating ratchet adjustment
• Better weight distribution
• Lower center of gravity
The helmet is made from a lightweight,
but durable material that meets the
requirements of CSA Z-94.3.
Designed for ultimate comfort
Safety is our ultimate directive; all features must inevitably enhance the user’s
protection. Even our improved comfort designs are ultimately rooted in safety: a
helmet can only work when the user wants to continually wear it. By enhancing
the helmet’s performance at all levels, we have made the most appealing – and
compelling – professional welding helmet within the Speedglas range.
An auto-darkening
welding filter with superior
optical performance
enables constant,
comfortable vision.
Precision welding is demanding, but with the Speedglas™ 9100 Helmet you can fully
concentrate in safety and comfort. Protecting your eyes and face from radiation, heat,
and sparks – while providing an accurate view of your work area – your Speedglas™
9100 helmet might soon be considered your most important welding tool.
Ultraviolet (UV) and
infrared (IR) radiation
protection in all states,
even if battery is depleted.
Heat reflecting
silver front.
Visit us at www.3m.ca/safety
Speedglas is the world’s leading brand of welding helmets and is a vital part
of 3M’s diverse range of personal protective equipment. Just as hundreds
of thousands of users rely on the Speedglas brand for their best welding
performance, 3M relies on welders’ feedback for its future
product innovations.
Increased coverage for lower neck
from heat and welding sparks.
Also available: flame-resistant
Tecaweld™ Protector for extended
neck and ear coverage.
3M™ Speedglas™ 9100 Welding Helmets
06-0100-10
Speedglas™ Helmet
9100 with ADF 9100V;
Shades 5, 8 –13
06-0100-10SW
Same as
above with
SideWindows
Increased
coverage for
ear and side
of neck.
SideWindows: Exclusive, patented shade 5
filters that widen your field of vision.
SideWindows enable you to be more aware of
nearby moving machinery, tools and other
peripheral hazards. The helmet is available
with or without SideWindows; welders can
also use removable cover plates for when
peripheral vision would be distracting.
06-0100-20
06-0100-30
Speedglas™ Helmet 9100
with ADF 9100X,
Shades 5, 8 –13
Speedglas™ Helmet 9100 with ADF
9100XX, Shades 5, 8 –13
06-0100-20SW
06-0100-30SW
Same as above with
SideWindows
Same as above
with SideWindows
Speedglas™
Great tools let you concentrate
3M™ Speedglas™ Welding Helmets with hard hat assembly
Approved Hard Hat
3M™ Speedglas™ 100 Hard Hat Adapter for
Speedglas 100 Helmets 07-0014-00NR
Speedglas™ Welding Helmet
100 Series
Approved Hard Hat
3M™ Speedglas™ 9100 Hard Hat Adapter for
Speedglas 9100 Helmets 06-0014-00NR
Speedglas™ Welding Helmet
9100 Series
All items sold in 1 per case quantity.
51
3M Speedglas Helmets
™
™
3M™ Speedglas™ 100 Welding Helmets with Variable Shade Filters
These seven new models are available with the Speedglas™ 100V
Filter, which features five user-selectable dark shades, from shade
8 to shade 12, and a light shade of 3.
BLAZED
Part Number/Stock Number:
07-0012-31BZ/70-0715-4480-6
ACES HIGH
Part Number/Stock Number:
07-0012-31AH/70-0715-4478-0
TROJAN WARRIOR
Part Number/Stock Number:
07-0012-31TW/70-0715-4484-8
This filter has three sensitivity settings: a normal setting used for
most types of welding (both indoors and outdoors), a setting for when
other welders are working nearby, and a setting for low-current or
stable arc (e.g. TIG) welding.
CHROME *
Part Number/Stock Number:
07-0012-31CH/70-0715-4481-4
TRIBAL
Part Number/Stock Number:
07-0012-31TR/70-0715-4483-0
*Reflected UV light from the chrome finish is absorbed by the clear coat finish. The measured intensity is similar to that of a black helmet.
Single Shade Filter Options
The Speedglas™ 100 Single Shade Filter is only available in
the black helmet design. Welders can choose the Speedglas™
100S-10 with a dark shade of 10 or the 100S-11 with a dark shade
of 11. Both models have a light shade of 3.
SS BLACK
Part Number
07-0012-10BL
07-0012-11BL
52
Stock Number
70-0715-4476-4
70-0715-4477-2
Description
(Dark shade 10)
(Dark shade 11)
MECHANICAL SKULL
Part Number/Stock Number:
07-0012-31MS/70-0715-4482-2
BLACK
Part Number/Stock Number:
07-0012-31BL/70-0715-4479-8
3M Speedglas Helmets New!
™
™
3M™ Speedglas™ Women’s Collection Welding Helmets
To acknowledge the unique contributions made daily by women welders, 3M has designed a worldwide first: The 3M™ Speedglas™
100 Series Graphic Welding Shields Women’s Collection. Inspiration by women welders to create four distinct and stunning designs
that affirm the rightful place of women welders as committed, passionate professionals.
07-0012-31WP-CA
07-0012-31SJ-CA
Wild-N-Pink
Skull Jewels
Pretty in pink, but do not touch! A vivacious vine flourishes behind a
protective overlay of barbed wire and razor-sharp metal sculpture.
Admire from a distance.
An elaborate floral grill motif emerges into a decorative skull and
covers the entire shield. The skull and flowers engage in visual
interplay as one becomes the other, and vice-versa.
07-0012-31SE-CA
07-0012-31SR-CA
Steel Eyes
Steel Rose
70-0715-6475-4
Projecting inner strength, with focused eyes looking through a blaze
of lilac flames.
70-0715-6477-0
Speedglas™
70-0715-6473-9
70-0715-6479-6
Toughness and patinated grace. Strong, fearless, and feminine at the same
time. Steel aesthetics emphasize the protective qualities of the shield.
53
Personalize Your Helmet
NHL Team Graphic Helmets
®
Available on the 3M™ Speedglas™ 100V Helmet
The official NHL® models are available with the 3M™ Speedglas™ 100V auto-darkening filters, which feature five user-selectable
dark shades, shade 8 to shade 12 and a light shade of 3. This Speedglas™ filter has three sensitivity settings: a normal setting used
for most types of welding (both indoors and outdoors), a setting for those situations where other welders are working nearby and
a setting for low-current or stable arc (e.g.Tig) welding. The new pre-shaped SL head suspension is easy to adjust and improves
operator comfort and safety. Welders have the choice of three outside protection plates, standard, extra scratch resistant and extra
heat resistant. The light weight design of 16 oz reduces operator fatigue.
Calgary Flames
07-0012-31CF-CA
Vancouver Canucks
07-0012-31VC-CA
Ottawa Senators
07-0012-31OS-CA
Edmonton Oilers
07-0012-31EO-CA
Montreal Canadiens
07-0012-31CH-CA
Toronto Maple Leafs
07-0012-31TML-CA
70-0715-6535-5
70-0715-6536-3
Officially Licensed
54
70-0715-6539-7
70-0715-4481-4
NHL and the NHL Shield are registered trademarks of the National Hockey League.
All NHL logos and marks and NHL team logos and marks depicted herein are the
property of the NHL and the respective teams and may not be reproduced without the
prior written consent of NHL Enterprises, L.P. © NHL 2010. All Rights Reserved.
70-0715-6538-9
70-0715-6407-7
3M Adflo Powered Air Respirator
™
™
Speedglas™ Welding Shields with the Adflo™ Respirator makes a light
compact, all in one system.
The exclusive “stackable” configuration of the Adflo™ Turbo Unit means
that the gas and vapour cartridge can be stacked onto the particle filter for
additional protection from specific organic, inorganic and acid vapours.
For cooler, cleaner and
more comfortable welding
How it works...
The Adflo Respirator is designed to provide a supply of filtered air from
the Adflo Turbo Unit via a breathing tube to the head top. The system
Speedglas™
creates a positive pressure, which together with the face seal helps
prevent particles and other contaminants from entering the helmet.
Exhaled air is quickly expelled away from the face and head areas,
keeping the welder comfortable and helping improve productivity.
Speedglas™ 9000 Welding Shield with Adflo™ Powered Air Purifying Respirator
Product
Stock Number
Description
15-1101-21
70-0712-8688-7
Complete system with Speedglas™ 9002X welding lens
15-1101-21SW
70-0712-8691-1
Complete system with Speedglas™ 9002X welding lens
and SideWindows
15-1101-31
70-0712-8689-5
Complete system with Speedglas™ 9002V welding lens
15-1101-31SW
70-0712-8690-3
Complete system with Speedglas™ 9002V welding lens
and SideWindows
Speedglas™ 9000 FlexView Welding Shield with Adflo™ Powered Air Purifying Respirator
Product
Stock Number
Description
16-1101-21
70-0712-8686-1
Complete system with Speedglas™ 9002X welding lens
16-1101-21SW
70-0712-8653-3
Complete system with Speedglas™ 9002X welding lens
and SideWindows
16-1101-31
70-0712-8687-9
Complete system with Speedglas™ 9002V welding lens
16-1101-31SW
70-0712-8690-3
Complete system with Speedglas™ 9002V welding lens
and SideWindows
55
3M Speedglas L-Series SG
™
™
Ideal For:
Welding
Grinding
Speaking
Use the Helmet/ADF Shield in the down position
for welding applications.
Lift the ADF Shield for grinding applications.
Lift the Wideview Faceshield for easy
communication in non-hazardous environments.
3M™ Speedglas™ Hard Hat Helmets with Powered & Supplied Air Protection L-Series SG
Part No.
16-0705-SGXX
Description
Quantity
™
™
™
3M Adflo Powered Air Purifying Respirator High Efficiency System, with 3M Hard Hat L-705SG and Wideview Faceshield and 1/Case
3M™ Speedglas™ Auto-Darkening Filter 9100XX
16-0705-SGX
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Hard Hat L-705SG and Wideview Faceshield and 1/Case
3M™ Speedglas™ Auto-Darkening Filter 9100X
16-0705-SGV
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Hard Hat L-705SG and Wideview Faceshield and 1/Case
3M™ Speedglas™ Auto-Darkening Filter 9100V
16-0905-SGXX
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview Faceshield and
3M™ Speedglas™ Auto-Darkening Filter 9100XX
1/Case
16-0905-SGX
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview Faceshield and
3M™ Speedglas™ Auto-Darkening Filter 9100X
1/Case
16-0905-SGV
3M™ Adflo™ Powered Air Purifying Respirator High Efficiency System, with 3M™ Helmet L-905SG and Wideview Faceshield and
3M™ Speedglas™ Auto-Darkening Filter 9100V
1/Case
Converting Your Existing L-Series Headgear
Made with your safety in mind.
If you are interested in converting your existing L-Series Headgear to
enable a Speedglas™ ADF, it is very simple:
1. Purchase the L-153SG
2. Choose a Speedglas™ ADF (9100V, 9100X or 9100XX)
3. If you are currently using the L-901 or L-905, you will need
to purchase a new inner and outer shroud
You can depend on 3M and Speedglas to develop products that provide
a high level of respiratory protection and safety.
Replacement Parts
• L905SG Meets CAN/CSA Z94.1, Type II, Class G
• Provides respiratory and limited head, face and eye protection
• Meets CSA standards for applications where positive pressure
respirators are required
• Meets ANSI Z89.1 Type II, Class G
Part No.
Description
15-5401-02SG
3M™ Adflo™ Turbo Assembly
Part No.
Description
15-0099-20
3M™ Adflo™ Flow Indicator Rubber Adapter for L-Series SG
L-905SG
3M™ Helmet L-905SG with Welding Shield and Wideview Faceshield
15-0099-21
3M™ Adflo™ Flow Indicator for L-Series SG
L-705SG
3M™ Hard Hat L-705SG with Welding Shield and Wideview Faceshield
L-199SG
3M™ Breathing Tube Cover, High Temperature
L-901SG
3M™ Helmet L-901SG with Wideview Faceshield
L-227
Outer Shroud, Flame Retardant, Leather
L-153SG
3M™ Weld Shield Kit
L-225-2
Outer Shroud, Flame Retardant, Durable
L-154SG
3M™ Silver Front Panel
L-226-2
Inner Shroud
L-122SG
3M™ Breathing Tube
L-223-2
Outer Shroud, Standard
L-228-2
Outer Shroud, Nylon
56
A
Revolutionary
Advance
3M™ FF-400 Series Ultimate FX Full Facepiece
in Respiratory Protection
Configurations include:
3M’s most rugged facepiece, designed to provide flexibility and durability
in X-treme work environments.
• Engineered to deliver maximum comfort with a wide field of view.
• Features a soft, silicone nose cup and a large lens that allows for superior peripheral vision.
• 3M™ Cool Flow™ Exhalation Valve helps reduce heat and moisture buildup inside the facepiece.
Large Lens Featuring Scotchgard™ Protector
• Paint and stain-resistant lens—3M’s exclusive Scotchgard™
coating causes some liquids to bead up on the surface so
they can be wiped off easily
•H
elps lens stay clearer during spray applications
Air Purifying Respirator
Dual Airline Supplied
Air Respirator
Durable, Long-lasting Head Harness
Filters, Respirators & Cartridges
• The only respirator with 3M’s unique Scotchgard™ Protector, which helps the lens resist dirt, paint and stains, and makes it easier to clean.
• Features a six-strap configuration
for a secure fit
• Harness straps pulled over one million times in
durability testing
• P rovides a wide field of view
Comfort Cradle
• Positions the respirator more
comfortably on the head
Bonded Silicone Gaskets
• Eliminates loose gaskets that
can be lost
Soft, Silicone Nose Cup and Faceseal
• Engineered for maximum durability,
comfort and resilience
• Three sizes help the respirator fit a broad range
of face shapes and sizes
Easy to Use
• Respirator attachments
twist on and off easily
for quick assembly
and disassembly
Low Profile Bayonet Design
•H
elps improve balance and provides
better weight distribution
• Ideal for tight work environments
Patented 3M™ Cool Flow™
Exhalation Valve
• Allows for easier breathing
• Reduces heat and moisture
buildup for cool, dry comfort
57
Negative Pressure Respirators, Filters & Cartridges
3M Facepieces
™
3M™ Negative Pressure Respirators, Filters & Cartridges
The 3M™ Half and Full Facepiece Respirators 6000 and 7000 use interchangeable filters and cartridges, minimizing the number of parts your facility
needs to stock. They are versatile enough to meet your current and future respirator needs. These products offer unique benefits, without limiting wearer
comfort. All are available in three sizes, making your respirator choice simple—3M!
3M™ 6000 Series Half Facepiece
3M™ 7500 Series Half Facepiece
3M™ Half Facepiece Respirators 6000 Series, Reusable Provides
Lightweight, Easy-to-use, Economical Protection
3M™ Half Facepiece Respirators 7500 Series, Reusable Provides
Comfortable, Soft Silicone Faceseal
• An economical choice
• Made of silicone for greater comfort and helps provide a softer
feel on the face
• Facepiece is made from soft, lightweight thermoplastic elastomer
• Head harness assembly and spare parts available
• 6100 Small / 6200 Medium / 6300 Large
• 3M™ Cool Flow™ Exhalation Valve for easy exhalation for cool,
dry comfort; and designed to be long lasting
• Can be used in a drop down suspension by positioning the straps
over the locking tabs
• Can be used with a variety of cartridges and filters that
help protect against both dust and/or gas and vapour
• 7501 Small / 7502 Medium / 7503 Large
3M™ 6000 Series Full Facepiece
3M™ 7800S Series Full Facepiece
3M™ Full Facepiece Respirators 6000 Series, Reusable
• Light silicone facepiece enhances fit and improves durability
• Wide field of vision
• Extra-large inhalation and exhalation valves make breathing easier
• Lightweight design with silicone face seal enhances comfort and improves durability
• Double-flange face seal and six adjustable straps
help improve a secure fit
• Available in four different modes; can be used with both negative and powered and supplied-air systems
• 7800S-S Small / 7800S-M Medium / 7800S-L Large
• 6700 Small / 6800 Medium / 6900 Large
58
3M Filters
™
(Can be used with any of the facepieces listed on page 61)
3M™ 2071 P95 Filter
3M™ 5N11 N95 Filter
• For
grinding, sanding, bagging and other dusty operations
• For
3M™ 2076HF P95 Filter
use with 6000 series cartridges
3M™ 5P71 P95 Filter
• For
aluminum smelting, glass etching, chemical manufacturing, hydrogen
fluoride gas up to 10 times PEL
• For
use with 6000 series cartridges
3M™ 2078 P95 Filter
3M™ 501 Retainer
• For
• For
utilities operations, chemical manufacturing, aluminum smelting
use with 5N11 or 5P71 filters
• For
use with 2000 series and 7093/7093C
to respirators 5000 series and cartridges 6000 series
• For
welding, metal pouring, pharmaceuticals
3M™ 2096 P100 Filter
3M™ 603 Filter Adapter
• For
• For
welding, metal pouring, pharmaceuticals, utility operations,
chemical manufacturing,
aluminum smelting
• Nuisance
use with 5N11 or 5P71 filters and 501 filter adapters
3M™ 2291 Advanced
Particulate P100 Filter
level acid gas relief
3M™ 2097 P100 Filter
• For
welding, metal pouring, pharmaceuticals, chemical
manufacturing, undercoating
• Nuisance
• For
welding, metal pouring, pharmaceuticals
• Hard
• For
mining, shipbuilding, abatement, utilities and more
• NIOSH
approved for environments containing certain oil and non-oil based particles
level organic vapour relief
3M™ 7093 P100 Filter
Made in Canada
with imported parts
3M™ 2296 Advanced
Particulate P100 Filter
• NIOSH
approved for environment containing certain oil and non-oil based particles
Shell
• Nuisance
3M 7093C P100 HF
Cartridge
Filters, Respirators & Cartridges
3M™ 502 Filter Adapter
3M™ 2091 P100 Filter
level acid gas relief
™
Made in Canada
with imported parts
• Hydrogen Fluoride (HF) Cartridge with
nuisance level organic vapour and acid gas relief
• Welding, grinding, hospitals,
pharmaceutical plants, abatement and
mining/smelting operations
3M™ 2297 Advanced
Particulate P100 Filter
• NIOSH
approved for environments containing certain oil and non-oil based particles
• Nuisance
level organic vapour relief
59
Negative Pressure Respirators, Filters & Cartridges
3M Cartridges
™
(Can be used with any of the facepieces listed on page 61)
3M™ 6001 OV Cartridge
3M™ 60921 OV/P100 Cartridge
• For
• With
use with certain organic vapours
• For
use with certain organic vapours
3M™ 6002 AG Cartridge
3M™ 60922 AG/P100 Cartridge
• For
use with chlorine, hydrogen chlorine,
and sulphur dioxide or chlorine dioxide or
hydrogen sulfide
• With
3M™ 6003 OV/AG Cartridge
3M™ 60923 OV/AG/P100 Cartridge
• For use with certain organic vapours,
chlorine, hydrogen chloride, and sulphur
dioxide or hydrogen sulfide or
hydrogen fluoride
• With
3M™ 6004 AM Cartridge
3M™ 60924 AM/P100 Cartridge
• For
• With
P100 particulate filter
• For
use with chlorine, hydrogen chlorine,
and sulphur dioxide or chlorine dioxide or hydrogen sulfide
P100 particulate filter
• For
use with certain organic vapours,
chlorine, hydrogen chloride, and sulphur
dioxide or hydrogen sulfide or hydrogen fluoride
use with ammonia and methylamine
• For
P100 particulate filter
use with ammonia and methylamine
3M™ 6005 FORM Cartridge
3M™ 60925 FORM/P100 Cartridge
• For
• With
use with formaldehyde and certain
organic vapours
P100 particulate filter
• For
use with formaldehyde and
certain organic vapours
3M™ 6006 MG Cartridge
3M™ 60926 MG/P100 Cartridge
• For
• With
use with certain organic vapours,
chlorine, hydrogen chloride, chlorine
dioxide, hydrogen sulfide, ammonia/
methylamine, formaldehyde or hydrogen fluoride
60
P100 particulate filter
P100 particulate filter
• For
use with certain organic vapours,
chlorine, hydrogen chloride, chlorine
dioxide, hydrogen sulfide ammonia/
methylamine, formaldehyde or hydrogen fluoride
3M™ 6009 HG Cartridge
3M™ 60929 HG/P100 Cartridge
• For
use with mercury vapour or chlorine gas
• With
• End
of Service Life Indicator
• For
use with mercury vapour or chlorine gas
• End
of Service Life Indicator
P100 particulate filter
3M Half and Full Facepiece
Respirators 6000, 7000 and FF-400 Series
6100 (S) (AAD#07024)
6200 (M) (AAD#07025)
6300 (L) (AAD#07026)
6100DD (S)
6200DD (M)
6300DD (L)
7501 (S) (AAD#37081) 6700 (S) (AAD#07138)
7502 (M) (AAD#37082) 6800 (M) (AAD#07139)
7503 (L) (AAD#37083) 6900 (L) (AAD#07140)
Filter Retainer
and Adapter
6700DIN (S)
6800DIN (M)
6900DIN (L)
FF-401 (S)
FF-402 (M)
FF-403 (L)
Other Automotive Aftermarket
Products Available:
Paint Spray
Packouts (S, M, L): (#07177;
#07178; #07179)
(AAD#07046)
2071 P95 Filter
6001 OV
(AAD#07046)
60921 P100/OV
502 Filter Adapter¹
2076* HF/P95 Filter
60922 P100/AG
6002
AG
501 Filter Retainer
(AAD#07054)
2078** P95 Filter
(AAD#07047)
60923 P100/OV/AG
Cartridges and Filters
2091 P100 Filter
60924 P100/AM/MA
5N11 N95 Filter
5P71 P95 Filter
(AAD#07194)
6004
AM/MA
2096*** P100 Filter
*P95 filter with hydrogen fluoride and nuisance
level acid gas relief. (Nuisance levels are less
than OSHA PEL.) 2
**P 95 filter with nuisance level organic vapour/
acid gas relief. (Nuisance levels are less than
OSHA PEL.) 2
(AAD#07184)
2097**** P100 Filter
***P100 filter with nuisance level acid gas relief.
(Nuisance levels are less than OSHA PEL.) 2
60925 P100/Form
6005
Form
60926 P100/Multi Gas
****P100 filter with nuisance level organic vapour
relief. (Nuisance levels are less than OSHA PEL.) 2
2291 P100 Filter
*****P100 cartridge filter with hydrogen fluoride and
nuisance level organic vapour and acid gas relief.
(Nuisance levels are less than OSHA PEL.) 2
6006
Multi Gas
60929 P100/Merc
¹Do not reuse.
2296*** P100 Filter
23M recommended for relief against nuisance level
acid gas or organic vapours. Nuisance levels are
less than OSHA PEL or applicable government
occupational exposure limits, whichever is lower.
Do not use for respiratory protection against
gases or vapours.
Bodyman OV/P95 Packouts (S, M, L):
(#07181; #07182; #07183)
P-100 with Nuisance Organic
Full Facepiece 6000 Series
OV/P95 Packouts (S, M, L):
(#07161; #07162; #07163)
Brake & Clutch Packouts (S, M, L):
( #07001, #07002, #07003)
6003
OV/AG
(AAD#07000)
7800S (S)
7800S (M)
7800S (L)
Filters, Respirators & Cartridges
Facepieces
™
OV
=NIOSH approval: Certain
organic vapours.
AG
=NIOSH approval: Chlorine,
hydrogen chloride, and
sulfur dioxide or chlorine
dioxide or hydrogen sulfide.
OV/ =NIOSH approval: Certain
AG organic vapours, chlorine,
hydrogen chloride,
and sulfur dioxide or
hydrogen sulfide or
hydrogen fluoride.
AM/ =NIOSH approval: Ammonia
MA and methylamine.
Form =NIOSH approval:
Formaldehyde and certain
organic vapours
Multi-=NIOSH approval: Certain
Gas/ organic vapours, chlorine,
Vapourhydrogen chloride,
chlorine dioxide, sulfur
dioxide, hydrogen sulfide
ammonia/methylamine,
formaldehyde or
hydrogen fluoride.
Merc =NIOSH approval: Mercury
vapour or chlorine gas.
(AAD#37173)
6009
Merc
7093C***** P100/HF
2297**** P100 Filter
603 Filter Adapter
7093 P100 Filter
61
Negative Pressure Respirators, Filters & Cartridges
6000 Series Accessories
3M™ 6885 Face Shield Covers
3M™ 6886 Tinted Lens Cover
• 4
• 25
bags per case
3M™ 6889 Exhalation Valve
3M™ 6893 Inhalation Valve
• 10
• 5
each per bag
bags per case
• 40
each per bag
3M™ 6894 Cup Assembly
3M™ 6895 Inhalation Gasket
• 1
each per bag
• 4
• 5
bags per case
3M™ 6896 Adapter Gasket
• 20
each per case
bags per case
3M™ 6897 Head Harness
Assembly
• 1
62
each per bag
each per bag
3M™ 6898 Lens Assembly
3M™ 6899 Frame Kit
• 1
• 1
each per bag
• 5
each per case
each per bag
Powered Air Purifying Respirators
3M Head Mounted PAPR’s
™
3M™ Airstream™ Helmet-Mounted Powered Air Purifying Respirators
•Helmet-mounted
PAPRs provide all the features of powered air purifying respirators: increased wearer comfort, cooling, no fit test requirements,
compatibility with glasses and may help increase wearer productivity without the need to wear a motorized blower unit at the waist.
following systems are ideally suited for mining, smelting, foundry and metal working.
•Approved
for use with either a HEPA filter or an HF cartridge (AS-176).
3M™ Airstream™ Helmet-Mounted
PAPR AS-400LBC
3M™ Airstream™ Helmet-Mounted
PAPR AS-600LBC
•Eight-hour
•Miner’s
battery
•Intrinsically
safe
•Eight-hour
•Lightweight
and
well-balanced
•High
efficiency filter
•Hardhat
approved
•Includes
standard visor
model
battery
•Intrinsically
safe
•Lightweight
and well-balanced
•High
efficiency filter
•Hardhat
approved
•Includes
anti-fog/anti-scratch lens
Powered and Supplied Air
•The
Battery Chargers
Single Battery Charger
520-01-61SGL
Five Battery Charger
520-01-61FIV
Ten Battery Charger
520-01-61
AS-400LBC Kit includes one each of the following:
Motor Housing
Assembly
AS-115
Battery Pack
520-01-02R01
Pre-Filter
AS-120-10
Airflow Indicator
061-44-01R01
HEPA Filter
AS-140 –25/5
Visor
522-01-01R10
Faceseal
527-01-15R10
WARNING
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
63
3M Face-Mounted PAPR’s
™
3M™ Powerflow™ Face-Mounted Powered Air Purifying Respirator
6800 PF(Medium) and 6900 PF(Large)
•Face-mounted
•The
PAPRs provide increased cooling and wearer comfort that may help improve productivity
product is ideally designed for abatement and remediation work
•Approved
for use with high efficiency particulate filter only
•Intrinsically
safe
Battery Chargers
Single Battery Charger
520-01-61SGL
Five Battery Charger
520-01-61FIV
Ten Battery Charger
520-01-61
6800 PF Powerflow™ Kit
Hepa Filter
450-01-01R20
Flow Meter
520-01-21
Powerflow™ Replacement
Motor Blower Assembly
024-00-02R01
Battery Charger
521-01-43R01
Full Facepiece
6800DIN
NiCd Battery
BP-17IS
WARNING
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
64
Powered Air Purifying Respirators
3M GVP Belt-Mounted PAPR Combinations
™
Bumpcaps
L-501
L-503
Hardhats
L-505
L-701
Premium Suspension
S-133S White, S/M
S-433S White, S/M
S-133L White, M/L
S-433L White, M/L
S-133SB Blue, S/M
S-533S High Durability, S/M
S-133LB Blue, M/L
S-533L High Durability, M/L
S-333S High Durability, S/M
S-333L High Durability, M/L
S-655 Hood Assembly
w/inner collar
S-657 Hood Assembly
w/inner shroud
S-757 Painter’s Hood Assembly
w/inner shroud
S-855 Sealed Seam Hood Assembly
w/collar
S-857 Sealed Seam Hood Assembly
w/inner shroud
L-703
L-705
L-901
L-905
Full Facepieces
Hoods
Headgear
Integrated Suspension
Helmets
H-611
H-612
H-115
GVP-122
6700DIN (S)
6800DIN (M)
6900DIN (L)
7800S (S)**
7800S (M)**
7800S (L)**
Powered and Supplied Air
H-412
Breathing Tube
QRS Connection
BT-20S* / 37309
Small/Medium
V-199* Adapter
37069
BT-20L* / 37310
Medium/Large
L-122
*One V-199 Adapter is included with
each BT-20 Breathing Tube
GVP Cartridges/Filters
Cartridges/Filters
GVP-123
Part # Description
GVP-401 Organic Vapour (OV)
GVP-402Chlorine/Hydrogen Chloride/Sulfur Dioxide/Chlorine Dioxide/
Hydrogen Fluoride (AG)
GVP-403Organic Vapour/Chlorine/Hydrogen Chloride/Sulfur Dioxide/Chlorine
Dioxide/Hydrogen Fluoride/Hydrogen Sulfide (OV/AG)
GVP-404 Ammonia/Methylamine (AM/MA)
GVP-405 Formaldehyde (FM)
GVP-440 High Efficiency Particulate (HE)
GVP-441 Organic Vapour/HE (OV/HE)
GVP-442Chlorine/Hydrogen Chloride/Sulfur Dioxide/Chlorine Dioxide/
Hydrogen Fluoride/HE (AG/HE)
GVP-443Organic Vapour/Chlorine/Hydrogen Chloride/Sulfur Dioxide/Chlorine
Dioxide/Hydrogen Fluoride/Hydrogen Sulfide/HE (OV/AG/HE)
GVP-444 Ammonia/Methylamine/HE (AM/MA/HE)
GVP-445 Formaldehyde/HE (FM/HE)
GVP Powered Air Purifying Respirators
GVP-1 Includes all components:
GVP-100 Motor Blower
GVP-110 Power Cord
GVP-111 Battery Pack - NiCd
GVP-112 Battery Charger
GVP-113 Flow Meter
GVP-115 Blower Plugs
GVP-127 Waist Belt
L-181
Flow Meter Adapter
NiCd Battery
GVP-1 — Standard Belt
GVP-1U — Urethane Belt
GVP-CB — Comfort Belt
[GVP-111 — Battery Pack
is intrinsically safe]
GVP-1 NiMH Includes all components:
GVP-100 Motor Blower
GVP-210 Power Cord
BP-15 Battery Pack - NiMH
BC-210 Smart Battery Charger
GVP-113 Flow Meter
GVP-115 Blower Plugs
GVP-127 Waist Belt
L-181
Flow Meter Adapter
NiMH Battery
GVP-1NiMH — Standard Belt
GVP-1UNiMH — Urethane Belt
GVP-CBNiMH — Comfort Belt
WARNING
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
65
3M Breathe-Easy Belt-Mounted
PAPR Combinations
™
™
Headgear
Integrated Suspension
Headcovers
BE-12
Premium Suspension
S-433S White, S/M
S-133S White, S/M
S-433L White, M/L
S-133L White, M/L
S-133SB Blue, S/M S-533S High Durability, S/M
S-133LB Blue, M/L S-533L High Durability, M/L
S-805/807
S-333S High Durability, S/M
S-333L High Durability, M/L
S-855 Sealed Seam
Hood Assembly
w/collar
S-857 Sealed Seam
Hood Assembly
w/inner shroud
BE-12B-3 Blue Reg (3)
BE 12B-50 Blue Reg (50)
BE-12LB-3 Blue Lg (3)
BE-12LB-50 Blue Lg (50)
Hoods – BE-10 Series
Butyl Rubber BE-17
Full Facepieces
BE-10-3 White Reg (3)
BE-10-20 White Reg (20)
BE-10L-3 White Lg (3)
Helmets
7800S (S)
7800S (M)
7800S (L)
BE-17
BE-1
520-01-84R01
520-01-83R01 White
520-02-28R01 Black
Breathing Tube
6700DIN (S)
6800DIN (M)
6900DIN (L)
BE-10BR
Hood Butyl
Rubber
BE-12-3 White Reg (3)
BE-12-50 White Reg (50)
BE 12L-3 White Lg (3)
BE-12L-50 White Lg (50)
Turbo PAPR Assembly
BE-324
520-01-77
520-03-32R01 (Standard 33")
520-01-80R01 (Optional 25")
NiCd Battery
Turbo Assembly
intrinsically safe
520-17-00
520-01-00R01 (Standard 36")
520-02-94R01 (Optional 25")
Standard
Assembly
520-01-61SGL
520-01-61FIV
520-01-61
Single Battery Charger Five Battery Charger Ten Battery Charger
Cartridges/Filters for 520-17-00
Cartridges/Filters
526-01-13R01 (Standard, 17.5")
526-01-10R01 (Optional, 14")
Part # Description
456-00-01R06
Organic Vapour (OV) (A)
456-03-01R06Organic Vapour/Chlorine/Hydrogen Chloride/Sulfur Dioxide (OV/AG) (AE)
456-02-01R06Chlorine/Hydrogen Chloride/Sulfur Dioxide/Formaldehyde (AG/FM) (E)
456-01-01R06
Ammonia/Methylamine (AM/MA) (K)
456-00-01R12
High Efficiency Particulate (HE) (P3)
520-15-00
BP-15
BC-210
Cartridges/Filters for 520-15-00
Part # Description
456-00-01R06
Organic Vapour (OV) (A)
456-03-01R06Organic Vapour/Chlorine/Hydrogen Chloride/Sulfur Dioxide (OV/AG) (AE)
456-02-01R06Chlorine/Hydrogen Chloride/Sulfur Dioxide/Formaldehyde (AG/FM) (E)
456-01-01R06
Ammonia/Methylamine (AM/MA) (K)
456-00-01R12
High Efficiency Particulate (HE) (P3)
453-00-01R06
Organic Vapour/HE (OV/HE) (AP3)
453-03-01R06 Organic Vapour/Chlorine/Hydrogen Chloride/Sulfur Dioxide /HE (OV/AG/HE) (AEP3)
453-07-01R06Organic Vapour/Sulfur Dioxide/Hydrogen Fluoride/HE (OV/HF/AG/HE) (ALP3)
453-01-01R06 Chlorine/Hydrogen Chloride/Sulfur Dioxide/Formaldehyde/HE (AG/FM/HE) (EP3)
453-02-01R06
Ammonia/Methylamine/HE (AM/MA/HE) (KP3)
453-03-02R06
FR-57 (Approved with BE-10, BE-10BR, 6000 series, S-433, S-533, S-805, S-807)
453-03-03R06
FR-40 (Approved with 6000 only)
BE-10BR
(Approved only with AP3, AEP3, FR-57)
BE-17 (Approved only with P3, AP3, EP3, AEP3, ALP3)
WARNING
66
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
Powered Air Purifying Respirators
3M Air-Mate Belt-Mounted PAPR Combinations
™
™
3M™ Air-Mate™ or High Efficiency (HE) Belt-Mounted
Powered Air Purifying Respirator Systems – Product Matrix
•Lightweight
•Filter
•Up
and battery are enclosed in single unit
to eight hours of battery service per charge
•Choice
•High
of QC hood or QC head cover
efficiency particulate filter only
•Battery
can be charged either within unit or externally using the 520-04-24 external battery charger assembly
Hood BE-10 QC
Blue Reg (3)
Blue Reg (50)
Blue Lg (3)
Blue Lg (50)
BE-12-3
BE-12-50
BE-12L-3
BE-12L-50
White Reg (3)
White Reg (50)
White Lg (3)
White Lg (50)
BE-10-3
BE-10-20
BE-10L-3
White Reg (3)
White Reg (20)
White Lg (3)
Breathing Tube
BE-12B-3
BE-12B-50
BE-12LB-3
BE-12LB-50
Powered and Supplied Air
Headgear
Head Cover BE-12 QC
BE-224
HEPA PAPR Assembly
231-01-30U Includes:
231-01-30 Includes:
• Air Filter Unit 520-03-63R01
• Air Filter Unit 520-03-63R01
• Battery Pack 007-00-15R01
• Battery Pack 007-00-15R01
• HE Filter 451-02-01R01
• HE Filter 451-02-01R01
• Airflow Indicator 021-14-00R01 • Airflow Indicator 021-14-00R01
• Waist Belt Nylon 021-41-02R01 • Vinyl Belt GVP-117
231-01-30
520-01-61SGL
Single Battery Charger
520-01-61FIV
Five Battery Charger
Battery Charger
AMH-1U
520-01-61
Ten Battery Charger
520-04-24
External Battery Charger Assembly
WARNING
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
67
3M V-Series Air Regulating Valve Combinations
™
Bumpcaps
L-501
Hardhats
L-503
L-505
L-701
L-705
Premium Suspension
L-901
L-905
Hoods
Headgear
Integrated Suspension
L-703
Helmets
S-133S White, S/M
S-133L White, M/L
S-133SB Blue, S/M
S-133LB Blue, M/L
S-333S High Durability, S/M
S-333L High Durability, M/L
S-433S White, S/M
S-655 Hood Assembly w/inner collar
S-657 Hood Assembly w/inner shroud
S-433L White, M/L
S-533S High Durability, S/M S-757 Painter’s Hood Assembly
w/inner shroud
S-533L High Durability, M/L S-855 Sealed Seam Hood Assembly
w/collar
S-857 Sealed Seam Hood Assembly w/inner shroud
H-412
H-611
H-612
W-8100B
GVP-122
GVP-122
Breathing Tube
QRS Connection
BT-20S* / 37309
Small/Medium
V-199* Adapter
37069
BT-20L* / 37310
Medium/Large
L-122
H-115
Air Control Device
*One V-199 Adapter is included with each BT-20 Breathing Tube
Portable Air Purification Panels
Supplied Air Hose
V-100
Vortex Cooling
Heating Assembly
256-02-00
(50 cfm) with CO
Filtration and Monitor
WARNING
68
V-200
Vortemp™
Valve Assembly
V-300
Air Regulating
Connector Assembly
W-9435 – 3/8" High
Pressure Hose
(25, 50 or 100 ft.)
W-2929 – 3/8" High
Pressure Hose
(25, 50 or 100 ft.)
256-02-01
(100 cfm) with
CO Monitor
W-2806
(50 cfm) without
CO Monitor
V-400
Low Pressure
W-3020 – 1/2" Low
Pressure Hose
(25, 50 or 100 ft.)
Note: W-2808
CO Monitor
Retrofit Kit Available
805050
Ambient Air Pump
Note: Headgear, breathing tube, air control valve, and compressed air supply hose are required parts in a NIOSH-approved system. Any NIOSH certification appearing on 3M components is strictly
limited to use in an approved air system and only in full accordance with the specifications and limitations under said approval. NIOSH certifies complete assemblies only, not sub-assemblies.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements of the CSA Standard Z180.1.
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
Supplied Air Respirators
3M Dual Airline Tight-Fitting Facepiece Combinations
™
Portable Air
Purification Panels
WARNING
6000 Series
Full Facepiece
7800S Series
Full Facepiece
7000 Series
Half Facepiece
FF-400 Series
Full Facepiece
Standard Kits
Combination Kits
Back-Mounted
Adapter Kits
SA-2000 (High Pressure)
SA-2000LP (Low Pressure)
Combination BackMounted Adapter Kits
SA-2100 (High Pressure)
SA-2100LP (Low Pressure)
W-9435 – 3/8" High
Pressure Hose (25, 50 or 100 ft.)
256-02-00
(50 cfm) with CO
Filtration and Monitor
W-3020 – 1/2" Low
Pressure Hose (25, 50 or 100 ft.)
W-2929 – 3/8" High
Pressure Hose (25, 50 or 100 ft.)
256-02-01
(100 cfm) with
CO Monitor
W-2806
(50 cfm) without
CO Monitor
6000 Series
Half Facepiece
Powered and Supplied Air
Supplied Air Hose
Adapter Kits
Facepieces
Dual Airline, Supplied-Air, Tight-Fitting Facepieces
Note: W-2808
CO Monitor
Retrofit Kit Available
805050
Ambient Air Pump
Note: Headgear, breathing tube, air control valve, and compressed air supply hose are required parts in a NIOSH-approved system. Any NIOSH certification appearing on 3M components is strictly
limited to use in an approved air system and only in full accordance with the specifications and limitations under said approval. NIOSH certifies complete assemblies only, not sub-assemblies.
*It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements of the CSA Standard Z180.1.
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
69
Powered and Supplied Air
Supplied Air Respirators
3M™ Powered and Supplied Air Headgear
a
a
a
a
a
a
a
a
a
a
a
L-501
L-503
L-505
L-701
L-703
L-705
L-901
L-905
L-705SG
L-901SG
L-905SG
a
a
a
W-8100B
BE-1
BE-17
6000 Series Full Face
7000 Series Full Face
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
FF400 Series Full Face
a
AS-400
AS-600
a
a
H-412
H-611 / H-612
Speedglas HWR 9000
Speedglas HWR 9000 Flexview
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
II
II
II
II
II
II
II
II
II
II
II
II
I
I
I
I
I
I
I
a
a
*H-611 does not offer ANSI approved head protection
WARNING
These respirators help reduce exposure to certain airborne contaminants. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons, or use not in accordance
with the instructions, may adversely affect product performance and result in sickness or death.
Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance, and only in accordance with their operating and
maintenance manuals. For proper use, each person using these products must first read and understand the operator’s manual. See supervisor for assistance or call the 3M Canada
Service & Technical Service Centre at 1-800-267-4414.
70
Meets CSA Z94.1 (Head
Protection Type)
Meets ANSI Z89.1 -1997
(Head Protection Type)
Meets ANSI Z87.1-2003
Eye and Face High Impact
Can be worn with
limited Facial Hair*
For Welding
V-series
Adflo™ Assembly
Breathe Easy™ Assembly
GVP Assembly
Headgear
For Grinding
Application / Additional comments
Works with the following 3M Assemblies
Powered and Supplied Air
a
a
1
RP010AMST
RCRP010
0
RP010AMST-ST
RCRP010
1
BA020ANM
FB020
a
1
BA020AMST
FB020
2
BA020ANM-S1
FB020
a
2
BA020AMST-S1
FB020
4
BA050BNM
FB020
a
a
a
a
4
BA050BMST
FB050
4
BA050BMST/PKG*
FB050
4
256-02-00
523-01-28
523-01-28
Portable
Panel
Panel
Portable
Portable
Portable
Portable
50
a
a
4
RP050BMST
Panel
3
W-2806
Panel
0
BA050BNM-S1
FB050
0
BA050BMST-S1
FB050
0
RP050BMST-S1
523-01-28
0
RP050BMST-S1/PKG*
523-01-28
8
BA100BNM
523-01-29
8
256-02-01
523-01-29
8
BA100BMST
523-01-29
8
BA100BMST/PKG*
523-01-29
0
BA100BNM-S1
523-01-29
0
BA100BMST-S1
523-01-29
0
RP050BMST-S1/2
FX050/2
Portable
Panel
Panel
Panel
a
a
a
a
a
Portable
a
a
a
Portable
Portable
Portable
100
Panel
Panel
Panel
Panel
a
a
a
a
a
0
RP100BMST-S1
FX100
0
BA100ANM-S1
FB200
0
BA200AMST-S1
FB200
a
a
a
0
RP200CMST-S1
FX200C
0
BA450ANM-S1
FB450
0
BA450AMST-S1
FB450
a
a
a
0
RP200CMST-S1/4
Contact 3M
0
BA600ANM-S1
FB600
Panel
200
Panel
Panel
Panel
450
Panel
500
Frame
Panel
600
Panel
750
Frame
a
Panel
1000
Frame
a
a
a
a
a
0
BA600SNMST-S1
FB600
0
RP200CMST-S1/6
Contact 3M
0
BA100AMST-S1
Contact 3M
0
RP200CMST-S1/8
Contact 3M
Powered and Supplied Air
Replacement
Filters
a
a
Portable
20
Number of Outlets
Part Number
Panel
CO Monitor
Portable
10
CO Removal
Size
(CFM)
Portable/Fixed
Air Filtration Panel - Selection Tool
* Bonus includes extra set of filters and small calibration kit.
Popular Configuration / Common Competitive Configuration
Note:
Note:
523-01-28 = FX050 and 523-01-29 = FB100; only product labelling is different.
Panels listed with 0 outlets may be hard piped, or outlets may be attached using the following parts:
8005401
4 outlet block (up to 10-100 CFM)
8005402
2 of 8005401 in series (for panels > 100 CFM)
80022
Quick Connects (allows direct connection of W-9435 and W-3020 series airlines)
S685-003 Hex-Plug (used to plug the outlets that do not have a Quick Disconnect installed.)
WARNING
These respirators help reduce exposure to certain airborne contaminants. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance. Use only in accordance with operating and maintenance manuals and the
requirements of the authority having jurisdiction in your area. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons may adversely affect product performance and result in sickness or death. For proper use, each person must first read and understand
the operator’s manual. For assistance call the 3M Canada Technical Service Centre at 1-800-267-4414.
71
Sorbents
Petroleum, Chemical & Maintenance Sorbents
3M™ Petroleum Sorbent Pad HP-156
3M™ Petroleum Sorbent Pad T-151
•
High capacity, low profile sorbent pad, picks up
petroleum based fluids, but will not absorb water
• For routine use, cleaning up small spills and wiping
contaminated areas
• Each case can sorb up to 142 litres of petroleum-based
liquids and contains 100 pads, (each 19" x 17")
•
3M™ Petroleum Sorbent Roll HP-100
3M™ Chemical Sorbent Roll C-RL38150DD
•
Designed to cover large areas, petroleum sorbent rolls are
perfect for lining drawers, covering workbenches, or masking
areas from oversprays
• Can be cut to cover small areas or can be laid on open
waters, shorelines, or discharge stream
• Each roll (38" x 144') can sorb up to 276 litres of
petroleum-based liquids
• Can be wrung out and reused many times to reclaim funds
and keep costs down
•
3M™ Maintenance Sorbent Pad M-PD1520DD
3M™ Maintenance Sorbent Folded M-FL550DD
•
•
Ideal for placing in, under and around machines to catch drips
• It is highly sorbent and non granular so it will not damage
plant equipment
• Each case can sorb up to 142 litres of petroleum-based and
water-based fluids
• Contains 100 pads, (each 15.5" x 20.5")
72
Highly sorbent pad features a low profile design, for
easy placement in tight areas
• Ideal for cleaning up small spills and wiping down
contaminated areas
• Each case can sorb up to 164.6 litres of petroleum-based liquids
and contains 200 pads, (each 17" x 19")
Covers large surfaces, can be easily cut to cover small
areas or fit corners
• Acting as a work surface, can be used on top of benches
or tables in anticipation of leaks or spills
• Each roll (38" x 150') can sorb up to 287 litres of
a wide range of aggressive petroleum and water-based fluids
4 products in 1
• Can act as a boom, sheet, pad or pillow, reducing the need to
stock several different sorbent products for emergency response
• Each folded roll (5" x 50') is perforated every 16" and can sorb up to
119.2 litres of water-based or petroleum-based liquids
Monitoring Systems
Heat Stress Monitor
3M™ WIBGET ™ Heat Stress Monitor RSS-214
Heat stress can mean serious down time and possibly a life-threatening
situation. But with the 3M™ WIBGET™ RSS-214 Monitor, certain key
environmental factors can be measured quickly and easily that will help you
detect certain environmental factors that can contribute to heat stress. The 3M
WIBGET RSS-214 is the perfect monitor to help you establish a heat stress
management program.
3M™ WIBGET ™ Heat Stress Monitor RSS-214DL
3M™ WIBGET ™ Heat Stress Monitor RSS-214
Specifications
Reliable •1-year warranty
•Fast response
Range 25ºC; 45ºC; 60ºC
•17 hours continuous operation
•511 records of data storage*
*Optional add-in Data Logger
Fast Response: Direct reading of Wet Bulb, Dry Bulb, Vernon Globe equivalent,
WBGTin, and WBGTout temperatures at 95% responded level in less than 4.5 min.
Accurate: Displays to 1/10th degree.
Easy Operation: At the push of a button, the WIBGET™ RSS-214 monitor
calculates WBGT, helping you establish appropriate work rest ratios.
Accessories – Add-In Data Logger
•Allows
up to 511 records of data to be stored and output later
through a serial port
•Data
can be logged manually or at pre-selected intervals of
0.5, 1, 2, 5, 6, 10, 20 or 30 minutes
•Current
sensor data may be viewed while logging
•Most
recent data is transmitted first (reverse chronological) to your PC
•Data
is secure, even if battery fails or is removed
•Data
output provides record number, date and time, WB, DB, GT,
WBGTin, WBGTout.
•Software
provides for data storage, retrieval and calculates time-weighted
mean WBGT and time weighted metabolic rates
•Data
Logger is standard on RSS-214DL
Included With Purchase
Meter unit sensors, water bottle, wet bulb kit, demineralizer, owner’s manual,
9V NiMH battery and charger, Windows® software with data logger version.
Yearly calibration is available at the
3M Canada service and support centre:
1-800-267-4414
Monitoring Systems
This monitor calculates time-weighted mean WBGT. The RSS-214DL model is
equipped with a globe sensor, dry bulb sensor, data logging, wet bulb kit, charger,
computer serial adapter, Microsoft® Windows based PC software and manual.
Calibration Range Verified
WBGT Value Calculations
WBGT (outdoor) = 0.7 WB + 0.2 GT + 0.1DB
WBGT (indoor) = 0.7 WB + 0.3 GT
(WB = Wet Bulb; GT = Vernon Globe Equivalent Temperature;
DB = Dry Bulb)
Accuracy
±0.4°C (±0.7°F) of actual temperature at 25.0°C, 45°C and 60.0°C
(77.0°F, 113°F, 140.0°F) @ air speed = 180 fpm minimum.
Sensors
Globe Temperature patented construction provides characteristics identical
to 6" Vernon Globe.
Dry Bulb Ambient air temperature.
Wet Bulb Wick-covered sensor with reservoir, wetted with deionized or
distilled water.
Battery
Type Rechargeable 9V NiMH or 9V alkaline.
Life 17 hours of continuous operation.
Response Time
90% Responded Level Less than 2.2 minutes (2.0 minutes typical)
95% Responded Level Less than 4.5 minutes (4.2 minutes typical)
Note: For most practical purposes, the 95% response time can be considered as fully responded.
Electronics Warm-up—Less than 3 seconds
Note: Provided the sensors are acclimatized, readings are valid as soon as the meter reading
stabilizes (<3 sec.)
Dimensions
15.8 cm x 9.5 cm x 4.5 cm (6.2" x 3.75" x 1.75")
Height and Sensors 19.8 cm (7.8")
Weight 350 g.(12 oz)
WARNING
This monitor helps to measure certain environmental factors that can contribute to heat stress. Misuse may result
in sickness or death. For proper use, see supervisor or User Instructions, or call 3M OH&ESD Technical Service in
Canada, call at 1-800-267-4414.
73
3M Occupational Health &
Environmental Safety
Vast Range of Effective Occupational Safety Products
3M offers over 2000 personal health and safety products for:
Body Protection
Eye Protection
Hearing Protection
Active Communications
Respiratory Protection
Fall Protection
Welding Protection
Sorbents
Heat Stress
Respiratory Protection Training Services
• 3M’S ADVANCED RESPIRATOR TRAINING (ART):
This comprehensive program is an advanced level respiratory
protection course. It is intended for Health and Safety managers
or any individual charged with development, implementation and
maintenance of a Respiratory Protection Program.
• 3M’S QUALITATIVE FIT TESTING WORKSHOP (FTWS):
This program is an intermediate level respiratory protection course.
It is intended for individuals who will be responsible for conducting
qualitative fit testing within their workplace.
• USER TRAINING (UT):
This is an introductory level respiratory protection course. It is
intended for all respirator wearers. Employee training and fit testing is
a requirement as outlined in the CSA Z94.4 standard.
Training includes attendance records, and certificate of attendance
Respirator Fit Testing
• Qualitative
• Quantitative
Fit Testing includes Fit Test Records in accordance with
CSA Z94.4, and personal fit test cards.
Respiratory Protection
We can assist with...
• Program Development
• Respirator Protection Program (Code of Practice)
74
Hearing Conservation & 3M™ E-A-Rfit™ Validation Services
Elements of a Hearing Conservation Program
• Noise exposure assessment and monitoring
• Hearing protection devices
• Education, training and record keeping
E-A-Rfit™ Validation System
• Demonstration session show that in less than 10 seconds per ear, the
3M™ E-A-Rfit™ Validation System generates a personal attenuation
rating (PAR) for each worker
• Assists selection of appropriate protectors for workers & environments
Training and Services
• Helps identify workers receiving inadequate protection, leaving them
at risk for standard threshold shifts (STS)
• Documents data for further test comparison
For more information about 3M Occupational Health &
Environmental Safety and our many innovative products,
contact the 3M Canada OHES Service & Technical
Support Centre at 1-800-267-4414 or visit us online at
www.3m.ca/safety.
75
3M Canada Occupational Health and Environmental Safety
Service and Technical Support Centre
1 800 267-4414
Or visit www.3M.ca/safety
Products Available From:
Occupational Health and
Environmental Safety
3M Canada
P.O. Box 5757
London, ON N6A 4T1
Canada
1 800 267-4414
www.3m.ca/safety
76
Please recycle. Printed in Canada.
© 2010, 3M. All rights reserved.
1007-02265 E BA-10-15104
TecaWeld is a trademark of TenCate.
Kenwood is a registered trademark of Kenwood Corporation.
Motorola is a registered trademark of Motorola, Inc.
Constant Force and Full Contact are trademarks of Latchways PLC.
Microsoft Windows is a registered trademark of Microsoft Corporation.
NHL and the NHL Shield are registered trademarks of the National Hockey league. All logos and marks and NHL team logos are marks depicted herein are the property of the
NHL and the respective teams and may not be reproduced without the prior written consent of NHLEnterprises, L.P. © NHL All Rights Reserved.
2009 Orange County Choppers. All rights reserved. Orange County Choppers,O.C.C. and the O.C.C. logo are trademarks of Orange County Choppers Design Properties
LLC, used under license.
All other trademarks are owned by Cabot Safety Intermediate Corporation or their respective owners and are used under license.
3M, Adflo, Airstream, ARC Plug, Classic, E-A-R, E-A-Rbuds, E-A-Rfit, E-A-Rform, E-A-Rflex, E-A-R Push-Ins, E-A-Rsoft, EXPRESS, E-Z-Fit, E•Z Ins, FX, HearPlugs, No-Touch,
Optime, One Touch, Peltor, Pistonz, Pod Plugs, Push-Ins, Skull Screws, SofTouch, TaperFit, Tri-Flange, UltraFit, WorkTunes, Yellow Neons, BX, Centurion, DX, EX, Fectoggles,
Fuel2, GoggleGear, KX, Lexa, Light Vision2, Maxim, Maxim Plus, Maxim Sport, Metaliks, Metaliks Sport, Nuvo, OX, Privo, QX, Sport-Grip, SX, Tour-Guard, Virtua, Virtua Max,
Virtua Sport, X.Sport, Zora, Easy-Change, LumberJack, XLR8, Com-Tac, Elavation, Feather, Kinetic, PowerCom PLUS, Reload, SafeLight, SafeStop, Saturn, SwatTac,TacticalPro,
WorkSafe, Speedglas, Powerflow, Cool Flow, Air-Mate, Breathe Easy, Vortemp, WIBGET, Scotchlite, and Thinsulate are trademarks of 3M. Used under license in Canada.
•