LED TV
user manual
SUPPORT
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual see page 47.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and
specifications may be changed without notice.
Important Warranty Information Regarding
✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill the screen, if your model offers
this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded
standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as
well as burned in images, are not covered by your Samsung limited warranty.
Ř SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.),
or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will
affect image quality. To reduce risk of this effect, please follow the recommendations below:
Ř Avoid displaying the same TV channel for long periods.
Ř Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.
Ř Reduce brightness and contrast to avoid the appearance of after-images.
Ř Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
English - 2
Contents
Ř Important Warranty Information Regarding .... 2
Ř The Evolution Kit Slot (Kit Sold Separately) .... 33
Ř Still image warning .......................................... 2
Ř Connecting to a Network .............................. 34
Ř Contents ......................................................... 3
Ř Configuring Network Connections................. 36
Ř List of Features ............................................... 4
Ř The Smart Touch Control .............................. 38
Ř Accessories and Cables.................................. 5
Ř The IR Blaster ............................................... 42
Ř Installing the Stand ......................................... 7
Ř Setting up the Universal Remote Control ....... 44
Ř Installing the Wall Mount (Optional) .................. 8
Ř Using the Search
for Recommended Model Code .................... 46
Ř Providing Proper Ventilation for Your TV ........ 10
Ř Using the TV's Controller (Panel Key) ............ 11
Ř Troubleshooting ............................................ 49
Ř Connecting the Power Cord
and the Antenna or Cable Connection .......... 12
Ř Licenses ....................................................... 52
Ř The Standard Remote Control ...................... 13
Ř Specifications - Smart Touch Control ............ 55
Ř How to Navigate Menus................................ 15
Ř Specifications - IR Blaster ............................. 55
Ř Configuring
the Basic Settings in Initial Setup .................. 16
Ř Specifications ............................................... 56
Ř Connecting to AV Devices
(Blu-ray Players, DVD Players, etc.) ............... 20
Ř Video Codec ................................................. 58
Ř Connecting to Audio Devices ........................ 22
Ř Connecting to a PC ...................................... 23
Ř Storage and Maintenance ............................. 52
Ř Display Resolution ........................................ 57
Ř Dimensions ................................................... 59
Ř Index ............................................................ 60
Ř The EX-Link Cable Connection .................... 23
Ř Changing the Input Source ........................... 24
Ř Using Smart Hub .......................................... 25
Ř SMART Interaction ........................................ 26
− Voice Control........................................... 26
− Motion Control ........................................ 29
− Face recognition...................................... 31
English - 3
List of Features
Ř 3D: This exciting new feature enables you to view 3D content.
Ř SMART HUB: Your gateway to all your content, integrated in one place.
− Provides diverse entertainment choices.
− Lets you control your entertainment life with an easy-to-use, user friendly user interface.
− Gives you easy access to diverse apps, with more being added every day.
− Lets you customize your TV by grouping and sorting apps to your taste.
Ř AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,
digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your
wireless network.
Ř Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+
with your Samsung TV’s remote.
Ř e-Manual: Provides a detailed, on-screen user's manual that's built into your TV. (page 47)
Ř SMART Interaction: Using this function, you can access and control menu options and functions
using speech or motions. (page 26)
English - 4
Accessories and Cables
✎ Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎ The items’ colors and shapes may vary depending on the model.
✎ Make sure that there are no accessories hidden behind or under packing materials after you open the
box.
Ř Smart Touch Control (AA59-00626A) & Batteries (AA x 2)
Ř Cleaning Cloth (BN63-01798B)
Ř IR Blaster (BN96-22897A) & Batteries (AA x 4)
Ř Warranty Card / Safety Guide
Ř Remote Control (AA59-00637A) & Batteries (AAA x 2)
Ř 3D Active Glasses
Ř User Manual
Ř Power Cord
AV Adapter
Holder-Wire stand
Holder-Ring x 4
(BN39-01154H)
(BN61-08391A)
(BN96-18153A)
Assembling the Stand Wire Holder
Input Cables (Sold Separately)
You will need one or more of these cables to connect your TV to your antenna or cable outlet and your
peripheral devices (Blu-ray players, DVD players, etc.)
To purchase the RS232 cable, contact www.SamsungParts.com.
RS232 (AA39-00311A)
HDMI
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
English - 5
Audio
✎ Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks
are below.
Cable Plugs
Ports / Jacks
HDMI
USB
Optical
Do not plug cables in upside down.
Be sure to check the orientation of the plug before plugging it in.
Warning
Wireless Keyboard (Sold Separately)
Wireless Keyboard
English - 6
Installing the Stand
Stand Parts:
A
B
C
(M4 X L12)
Stand x 1
(M4 X L10)
Screws x 6 (46 inches only)
Screws x 6 (55 and 60 inches only)
Follow the steps below to connect the TV to the stand. For more detailed instructions, see the separate
stand installation guide.
1
2
A
1
2
ATTENTION
1
✎ Place a soft cloth over a table
DO NOT USE DO NOT USE
CHEMICALS
GREASE
DO NOT
USE OIL
to protect the TV, and then
place the TV on the cloth
screen side down.
3
4
B
x6 (M4 X L12) 46 inches only
C
x6 (M4 X L10) 55 and 60 inches only
or
English - 7
2
✎ NOTE
Ř Make sure to distinguish between the front and back of each component when assembling them.
Ř Make sure that at least two people lift and move the TV.
Ř Stand the product up before you tighten the screws. If you tighten the screws with the TV lying
down, it may lean to one side when you stand it up.
[ Do not insert your fingers into the stand base slot of the TV when installing the stand base.
Installing the Wall Mount (Optional)
Wall or Ceiling Mounting
If you mount this product on a wall, it should be mounted only as recommended by the
manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious
injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket. We do not
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury
to yourself or others if you elect to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
VESA Wall Mount Kit Notes and Specifications
✎ Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎ NOTE
Ř Standard dimensions for wall mount kits are shown in the table below.
Ř Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly
are provided.
Ř Do not use screws that do not comply with the VESA standard screw specifications.
Ř Do not use screws that are longer than the standard length or do not comply with the VESA
standard screw specifications. Screws that are too long may cause damage to the inside of the TV
set.
Ř For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
Ř Do not fasten the screws too firmly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
English - 8
Ř Samsung is not liable for product damage or personal injury when a non-VESA or non-specified
wall mount is used or the consumer fails to follow the product installation instructions.
Ř Do not mount the TV at more than a 15 degree tilt.
Ř Always have two people mount the TV on a wall.
Product Family
LED-TV
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard
Screw
26
100 X 100
M4
32 – 40
200 X 200
M6
46 – 60
400 X 400
M8
Quantity
4
✎ Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
Installing a Wall Mount from Another Manufacturer
To install a wall-mount from another manufacturer, use the HolderRing.
English - 9
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.
✎ Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts
provided by Samsung Electronics only.
Ř If you use parts provided by another manufacturer, it may cause difficulties with the product or result
in injury caused by the product falling.
Installation with a stand.
Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Other Warnings
✎ The actual appearance of the TV may differ from the images in this manual, depending on the model.
✎ Be careful when you touch the TV. Some parts can be somewhat hot.
English - 10
Using the TV's Controller (Panel Key)
The TV's Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV
without the remote control.
✎ The product color and shape may vary depending on the model.
Remote control sensor
When you use the Smart Touch Control, a standby
LED does not work (except P button).
Camera
Function menu
m
R
P
TV Controller
The image is drawn by facing
the front side of the TV.
✎ Follow these instructions facing the front of your TV.
✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure
not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right
directions.
✎ When you use a TV camera, you should check whether a tape attached or not in rear of the TV
camera, and then you can use a TV camera after adjust a camera angle. When you don't want to
use a TV camera, we recommend to use after a camera lens fixes to upwards. In this case, Face
recognition and Motion Control are not available.
Power on
Adjusting the volume
Selecting a channel
Using the Function menu
Selecting the SMART HUB (™)
Turn the TV on by pressing the Controller when the TV is in standby
mode.
Adjust the volume by moving the Controller from side to side when
the power is on.
Select a channel by moving the Controller upwards and downwards
when the power is on.
To view and use the Function menu, press and release the Controller
when the power is on. To close the Function menu, press and release
the Controller again.
With the Function menu visible, select SMART HUB (™) by moving
the Controller upwards. The SMART HUB main screen appears.
Select an application by moving the Controller, and then pressing the
Controller.
English - 11
Selecting the MENU (m)
Selecting a Source (s)
Power Off (P)
With the Function menu visible, select the MENU (m) by moving the
Controller to the left. The OSD (On Screen Display) Menu appears.
Select an option by moving the Controller to the right. Move the
Controller to the right or left, or upwards and downwards to make
additional selections. To change a parameter, select it, and then press
the Controller.
With the Function menu visible, open the Source (s) list by moving
the Controller to the right. The Source list screen appears. To select
a source, move the Controller upwards and downwards. When the
source you want is highlighted, press the Controller.
With the Function menu visible, select Power Off (P) by moving the
Controller downwards, and then press the Controller.
✎ To close the Menu, Smart Hub, or Source, press the Controller for more than 1 second.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric
power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long
periods of time (when you are away on vacation, for example). It is best to unplug the power cord.
Connecting the Power Cord and the Antenna or Cable Connection
VHF/UHF Antenna
Antenna Cable (Not Supplied)
Cable
ANT OUT
or
Power Input
✎ Plug the power cord into a wall outlet only after you have made all other connections.
✎ If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite
connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎ Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could
break the antenna jack off the TV.
English - 12
The Standard Remote Control
Learn where the function buttons are on your remote. Especially note SOURCE, MUTE, VOL, CH, MENU,
TOOLS, E, INFO, CH LIST, RETURN, and EXIT.
✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used
by visually impaired persons.
Turns the TV on and off.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this
button set to On will reduce the battery
usage time.)
SOURCE
Displays and selects the available video
sources. (page 24)
Gives direct access to channels.
Press to select additional digital
channels being broadcast by the same
digital station. For example, to select
channel ‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
PRE-CH
Returns to the previous channel.
Cuts off the sound temporarily.
MUTE
M
Changes channels.
Adjusts the volume.
CH
LIST
Displays channel lists on the screen.
Opens the OSD (Menu).
MENU
Quickly select frequently used functions.
Use this button in a specific feature. For
details, refer to the e-Manual.
TOOLS
HISTORY
INFO
Brings up the Smart Hub applications.
See e-Manual chapter Advanced
Features ĺ Smart Hub.
Displays a list of recently used functions.
You can select a function again easily
and quickly.
Displays information on the TV screen.
Moves the cursor, selects the on-screen
menu items, and changes the values
seen on the TV's menu.
B
Use these buttons according to the
directions on the TV's screen.
Use these buttons in a specific feature.
For details, refer to the e-Manual.
EXIT
RETURN
C
Family Story
SEARCH
SUPPORT
P.SIZE
ll
Exits the menu.
D
CAMERA
ll
Returns to the previous menu.
English - 13
Family Story: Connect to the Family
Story application. See e-Manual chapter
Advanced Features ĺ Family Story.
SEARCH: Starts search function. See
e-Manual chapter Advanced Features
ĺ Search.
CAMERA: Connect to camera
application.
SUPPORT: Lets you use various
support functions including the
e-Manual. (page 47)
P.SIZE: Lets you select the Picture
Size. See e-Manual chapter Basic
Feature ĺ Changing the Picture Size.
X: Turns the 3D image on or off. See
e-Manual chapter Advanced Features ĺ
Using the 3D function.
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
✎ Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, see
page 38.
✎ NOTE
Ř Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
Ř Use the remote control within 23 feet of the TV.
Ř Bright light may affect the performance of the remote control. Avoid using it near fluorescent lights
or neon signs.
Ř The color and shape of the remote may vary depending on the model.
English - 14
How to Navigate Menus
Your TV’s Main and Tools menus contains functions that let you control the TV’s features. For example, in
the Main menu you can change the size and configuration of the picture, its brightness, its contrast and so
on. There are also functions that let you control the TV’s sound, channel configuration, energy use, and a
host of other features. To access the main, on-screen menu, press the MENUm button on your remote.
To access Tools menus, press the TOOLST button. Tools menus are available when the TOOLST menu
Icon is displayed on the bottom right of the screen
The illustration below displays the buttons on the standard remote you use to navigate the menus and
select and adjust different functions. For information about using the Smart Touch Control, see page 38.
1
MENU
2
TOOLS
INFO
RETURN
EXIT
HISTORY
3
4
5
1 MENUm button: Displays the main on-screen menu.
2 TOOLST button: Displays the Tools menus when available.
3 E and Direction buttons: Use the Direction buttons to move the cursor and highight an item. Use the
Enter button to select an item or confirm the setting.
4 RETURNR button: Returns to the previous menu.
5 EXITe button: Exits the on-screen menu.
How to Operate the Main Menu (OSD - On Screen Display) Using the Standard Remote
The access steps may differ depending on the menu option you select.
1
2
3
4
5
6
7
MENUm
The main menu options appear on the screen:
E
Picture, Sound, Channel, Network, System, Support.
Select a main menu option on the left side of the screen with the u or d
button.
Press E to access the sub-menus.
u/d
Select the desired submenu with the u or d button.
u/d/l/r
E
Adjust the value of an item with the l, r, u, or d button. The
adjustment in the OSD may differ depending on the selected menu.
Press E to confirm the selection.
EXITe
Press EXITe.
u/d
English - 15
Configuring the Basic Settings in Initial Setup
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the P button to
turn on the TV.
✎
✎
✎
✎
Use the standard remote to run the Initial Setup.
Setup is available only when the input source is set to TV. See "Changing the Input Source" (page 24).
To return to the previous step in the Setup sequence, select Previous.
If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
or cable connection before you turn on the TV. See page 12 for instructions.
✎ If you want to configure a wired network connection during Setup, make sure you've connected a
LAN cable to your TV. See pages 35 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Select a Language.
After you press the P button, the Start screen appears. Select Next
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process.
2
Use Mode: Select
the Home Use
Mode.
On the Use Mode screen, select the Home Use using your remote, and
then select Next. The Network Settings screen appears.
✎ Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about Store Demo, go to the end of this section.
3
Network Settings:
Configure the
network settings
To configure your network settings, select Start using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page.
✎ To configure
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select Skip, and
then go to 6 - Auto Program (1) on page 18.
later, select Skip.
You can set up
the network
connection later
using the onscreen Network
menu.
To configure network settings later, refer to “Setting up the Wired or
Wireless Network” in the e-Manual or see the Network Connection
sections in this manual (pages 34 and 36).
English - 16
3a
Wireless Network
1. The TV searches for and then displays all the wireless networks
within range. When done, it displays a list of the networks. In the list
of networks, move the Highlight to select a network, and then select
Next. If the selected network requires a Security Key, the Security
Key screen appears.
✎ If you have a WPS(PBC) compatible router, select WPS(PBC)
instead, and then follow the directions on the screen. When
done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
✎ Enter numbers and letters using your remote.
Ř If you are using the standard remote, you can enter numbers
by pressing the number buttons on the remote.
Ř To enter a letter, move the Highlight to the letter, and then
select it. You can enter numbers in the same fashion if you
choose.
✎ To display capital letters (or redisplay small letters if capital letters
are displayed), select Caps or Shift.
✎ To display symbols and punctuation, select F. To redisplay
letters, select F again.
3. When done, select Next if you have entered a security key or WPS
PIN if you have entered a WPS PIN.
4. The TV checks the wireless connection. If the connection is
successful, the You are connected to the Internet. If you have any
problems using online services, please contact your Internet
Service Provider. message appears. Select Next, and then go to 4
Software Upgrade Step.
✎ If the connection fails, select Previous, repeat Step 1 and 2,
carefully re-enter your security key or WPS PIN, then repeat
Steps 3 and 4. If it fails again, select Next on the “Connection
Failed” screen, and then go to 6 - Auto Program (1) on the next
page. Configure your network later through Network Settings
in the TV’s Menu. For more information, refer to “Setting up the
Wired or Wireless Network” in the e-Manual or see the Network
Connection sections in this manual (pages 34 and 36).
3b
Wired Network
The TV checks the network connection, then displays the You are
connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider. message
appears. Select Next. The Software Upgrade screen appears.
English - 17
4
Software Upgrade:
Update the software
to the latest version
✎ To update later,
select Skip.
When Network Settings is complete, your TV will check for a new
software version automatically. If new software is available, the TV
downloads and installs the new software. When the download is
complete, select Next.
✎ If you want to upgrade later, select Skip. For more information, refer
to Software Update (Preference Features ĺ Support Menu) in the
e-Manual.
✎ This may take some time, depending on your network status.
✎ You can only upgrade software if your TV has an active network
connection.
✎ If no new update software is available, a no new updates message
appears on the screen. Select OK.
5
Terms of Service
Agreement
The Terms of Service Agreement screen appears.
✎ The screen can take a few seconds to display.
The General Disclaimer screen appears. Select Agree. The Privacy
Policy screen appears. Select Agree.
✎ To use Smart Hub, you must select Agree for the Terms of Service
Agreement.
6
Auto Program (1):
Select where your
TV signal comes
from.
Select the appropriate option for your TV using your remote, and then
select Next.
Ř I use an antenna cable connection to the TV.: Select if you have an
antenna or a cable connection without a set-top box. If you select this
option, go to 7 - Auto Program (2) Step.
Ř I use a set-top box.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Program. If you select this option,
go to 9 - Clock on the next page.
7
Auto Program (2):
Select the search
options.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. If you selected Air, go to 8 - Auto Program (3).
3. If you selected Cable, you’ll go to the cable system screen. Select
Digital Cable System. The option window appears. Select the
correct cable signal format; STD, HRC, or IRC. Most cable systems
use STD (Standard). Repeat the same process with Analog Cable
System.
4. When done, select Next.
English - 18
8
Auto Program (3):
Channel
memorization
Channel memorization stars. Channel memorization can take up to 45
minutes, depending on your cable system.
For more information, refer to Auto Program (Channel Menu ĺ
Memorizing Channels) in the e-Manual.
✎ Select Stop at any time to halt the memorization process.
9
Clock: Set the Clock Select Auto or Manual, and then select Next.
✎ If you selected I use a set-top box. in 6 - Auto Program (1), you can
only set the current time and date manually, using your remote.
Auto
If you selected Auto, the TV will automatically download the correct time
from a digital channel. The Time Zone screen will appear. Select your
Time Zone, and then select Next. The DST (Daylight Savings Time)
screen will appear. The DST function sets the time ahead one hour to
adjust the clock for Daylight Savings Time. Select On if you want to turn
the DST adjustment on. Select Off to turn off the DST adjustment. You
can also turn the DST function on through the TV's on screen menu
(Menu ĺ System ĺ Time ĺ Clock ĺ DST).
Manual
If you selected Manual, you’ll go to the Clock screen. Select Date or
Time. You can set the current date and time using your remote. When
done setting the Date and Time, select Next.
10
Voice and Motion
Control: Setting the
Voice and Motion
Control function.
You can turn the Voice and Motion Control function on or off. Select Off
or On, and then select Next.
11
Setup Complete
Review the Setup data, and then select Close to finish.
✎ The completed settings are displayed.
If You Want to Rerun Setup...
Menu ĺ System ĺ Setup
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more
than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using
the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. See
page 11 for information about the Controller.
English - 19
Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)
Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)
For the best quality HD picture, we recommend using an HDMI connection.
Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top-Box satellite receivers.
Device
HDMI Cable (Not Supplied)
HDMI OUT
✎ HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)
Ř For the best picture and audio quality, connect digital devices to the TV using HDMI cables.
Ř An HDMI cable supports digital video and audio signals, and does not require an audio cable.
− To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI
cable and audio cables.
Ř If you connect an external device to the TV that uses an older version of HDMI, the video and audio
may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is
out of date, request an upgrade.
Ř Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
Ř We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet
compatible. Note that this product does not support the Ethernet function via HDMI.
Ř This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2 (ARC) port only.
− If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this
case, set 3D Auto View or 3D Mode to Off.
Ř The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be
enabled only when the TV is connected with an audio receiver that supports the ARC function.
English - 20
Ř This product supports the Mobile High-Definition Link (MHL) function via an HDMI-MHL cable. Note
that the MHL function is supported by the HDMI IN 3 (MHL) port only.
Ř The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the
TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL
function. For more detailed information, see "Using the MHL function" in e-Manual.
Ř When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But
if you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically.
To view an original size, select Screen Fit in the Picture Size menu (Menu ĺ Picture ĺ Picture
Size).
Ř If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this
case, the TV may work differently than when you use MHL devices via a MHL cable.
✎ For the best cable connection to this product, use cables no thicker than the cable illustrated below:
Ř Maximum thickness - 0.55 inches (14mm)
Using a Component Cable (up to 1080p HD signals) or an Audio/Video Cable (480i analog signals
only)
Use with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
Red Blue Green
Red White Yellow
Red
AV Adapter (Supplied)
Audio Cable (Not Supplied)
Audio Cable
(Not Supplied)
Component Cable
(Not Supplied)
Video Cable
(Not Supplied)
White
Audio Cable (Not Supplied)
Video Cable (Not Supplied)
Device
Device
Device
✎ For better picture quality, we recommend the Component connection over the A/V connection.
✎ When you connect a Video cable to AV IN 1, the color of the AV IN 1 [VIDEO] jack (green) will not
match the video cable (yellow).
English - 21
Connecting to Audio Devices
Using an Optical (Digital) Cable Connection and a Standard Stereo Cable Connection
Use with Digital Audio Systems, Amplifiers, and Home Theaters.
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
Amplifier /
DVD home theater
Audio Cable (Not Supplied)
AUDIO IN
R
W
R-AUDIO-L
Red White
✎ DIGITAL AUDIO OUT (OPTICAL)
Ř When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease
the volume of both the TV and the system.
Ř 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1
CH.
Ř When the receiver (or home theater) is set to on, you can hear sound output from the TV’s optical
jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater
receiver. When the source is a digital component such as a DVD player / Blu-ray player / cable box
/ STB (Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hear
2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital
audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an
amplifier or home theater.
✎ AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
Ř When connecting, use the appropriate connector.
Ř When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and
adjust the volume level with the amplifier’s volume control.
English - 22
Connecting to a PC
Using an HDMI cable or an HDMI to DVI cable
✎ Your PC may not support an HDMI connection.
✎ Use your PC speakers for audio.
HDMI Cable (Not Supplied)
HDMI OUT
HDMI to DVI Cable (Not Supplied)
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
The optimal resolution is 1920 X 1080 @ 60 Hz. See the Display Resolution page for all available
resolutions (page 57).
✎ NOTE
Ř For an HDMI to DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
Ř For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to
the HDMI IN 1 (DVI) jack on the TV. Use the PC's speakers for audio.
Ř PC (D-Sub) input is not supported.
The EX-Link Cable Connection
The EX-LINK connection is for service only.
English - 23
Changing the Input Source
Source
™ ĺSource
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch
to your cable box or STB satellite receiver, you need to change the Source.
■ TV / HDMI1/DVI / HDMI2 / HDMI3 / AV1 / AV2 / Component
1. Press the ™ button on your remote. The Smart Hub screen appears.
2. Select Source. The Source screen appears.
3. Select a desired external input source.
✎ Alternatively, you can access the Source screen by selecting the SOURCEs button on your
standard remote or selecting Source with the Smart Touch Control (see page 38).
✎ You can only choose external devices that are connected to the TV. In the displayed Source list,
connected inputs are highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, open the Tools
menu when the Source list is displayed. The following selections appear under Edit Name:
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Select an input jack, and then select the
name of the device connected to that jack from the list that appears. For example, if you have your Bluray player attached to HDMI IN 2 (ARC), select Blu-ray for that input.
✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in
Edit Name.
✎ If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to
HDMI1/DVI in Edit Name.
✎ If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI
Devices to HDMI1/DVI in Edit Name.
Information
You can see detailed information about the selected external device.
Refresh
If the external devices are not displayed in the Source list, open the Tools menu, select Refresh, and then
search for the connected devices.
✎ Alternatively, you can refresh the Source list by selecting a using your remote.
English - 24
Using Smart Hub
Smart Hub provides easy, on-screen access to five functions that let you manage and access channels,
set favorite channels, access photos, videos, or music on USB devices, cameras, and PCs, select video
sources, and set the TV to turn on automatically when a show you want to watch is on. The five functions
are listed below:
Ř Channel: Lets you manage channels, select favorite channels, add channels to and delete channels
from the Added Ch. list (the channels that appear when you press the z button.)
Ř Web Browser: Lets you browse the Internet.
Ř Schedule Manager: Lets you schedule shows and channels for viewing.
Ř Source: Lets you select a connected external video source to view.
Ř AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,
digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your
wireless network.
Smart Hub also provides an easy-to-use gateway to a host of on-line media and entertainment including
apps from the Samsung Apps store, streaming videos and movies, kids sites, and more.
✎ To access Smart Hub, press the ™ button on your remote.
✎ For more information about Smart Hub, see the e-Manual.
English - 25
SMART Interaction
Using this function, you can access and control menu options and functions using speech, motions or face
recognition.
INFORMATION BOOKLET DISCLAIMER
Ř Face recognition Log-in
In order for Face recognition to function, a thumbnail image of your face will be stored in your TV for
logging-in purposes.
Logging into the Smart Hub using Face recognition may be less secure than using an ID and
password.
Ř TV Camera Usage
Before using the TV Camera, you should be aware that under some circumstances and under certain
legal conditions your misuse of the TV Camera can result in legal liability for you. By using the TV
Camera, you agree that you will not use the camera (i) in locations where cameras are generally
prohibited (such as bathrooms, locker rooms or changing rooms), (ii) in any manner that will result in an
invasion of a person’s privacy or (iii) in violation of any applicable laws, regulations or statutes.
When you use a TV camera, you should check whether a tape attached or not in rear of the TV
camera, and then you can use a TV camera after adjust a camera angle. When you don't want to use a
TV camera, we recommend to use after a camera lens fixes to upwards. In this case, Face recognition
and Voice and Motion Control are not available.
Voice Control
Menu ĺ System ĺ Voice and Motion Control ĺ Voice Control
Enable or disable the voice recognition function. Lets you access and control menu options and functions
by speaking letters or words.
✎ For accurate voice recognition, refer to the Standard Voice Command list at the Samsung web site
(www.samsung.com ĺ support ĺ Manuals & Downloads).
✎ Voice Control function can be affected recognition by unclear pronunciation, voice level, or
surrounding noise.
✎ To use Voice Control, you must pronounce words and phrases clearly and correctly in the language
you selected in Language.
✎ Ambient noise may cause Voice Control to malfunction. (Appropriate surrounding noise: Below
40dB)
Your TV can "hear" your voice commands in two ways:
− Using the TV’s microphone. (Distant Recognition)
✎ We are recommended using Voice Control function within about 13 ft with your TV. You can
check the usable distance by using Voice Control Environment Test (System ĺ Voice and
Motion Control ĺ Voice Control ĺ Voice Control Environment Test).
English - 26
− Using the VOICE˜ button on your remote. (Close Proximity Recognition)
✎ When you use the TV's microphone, the words may not be recognized because of ambient noise.
If this occurs, try using the VOICE˜ button on your remote. The TV will be able to recognize a
voice command more easily.
✎ The VOICE˜ button on your remote is always activated. If you want to use the TV's microphone,
turn on Voice Control (System ĺ Voice and Motion Control ĺ Voice Control).
✎ Say a voice command to proper volume into the microphone of your remote within 0.3 – 0.9 ft. If
voice level is too small or large, voice command may not be recognized.
✎ If a menu option or function is not supported by the Voice Control function, we suggest trying the
Motion Control function. To use the Motion Control, raise your hand while opening it toward the
screen, hold it for a moment and then wave it 3~4 time to the left and right. Motion Control starts. If
the Motion Control starts, the cursor is displayed at the center of the screen and the Motion Guide
Bar Size is at the bottom of the screen.
■ Voice Control
Turns the Voice Control function on or off.
✎ The VOICE˜ button on your remote is always activated.
■ Language
Select the recognition language you want to use.
■ Trigger Words
You can select the Trigger Words that start the Voice Control function.
Alternatively you can turn on your TV using the Trigger Words if Voice Control function is set to On.
− If the Trigger Words is set to Hi TV, say Hi TV Power On.
− If the Trigger Words is set to Smart TV, say Smart TV Power On.
■ Voice Command Bar Size
Set the Voice Command Bar Size mode to Minimum or Full. Minimum displays the least number of
words and phrases you can use. Full displays all the words and phrases.
■ Voice Sensitivity
You can configure the sensitivity of Voice recognition.
− Howling: Select howling levels.
− Recognition responsiveness: Select the responsiveness level of Voice recognition.
English - 27
■ Voice Control Environment Test
You can test the amount of ambient noise level detected by the TV microphone.
− Noise Test: This test checks the amount of ambient noise detected by the TV microphone. Too
much ambient noise will prevent Voice Command from functioning. To run, select Next using your
remote. The test starts and takes a few seconds. Please keep as quiet as possible during the test.
− Mic & Speaker Test: Determines if the sound from the TV speakers picked up by the TV
microphone will disrupt Voice Command. To run, select Start using your remote. The test starts and
takes a few seconds. Please keep as quiet as possible during the test.
✎ Available only when Speaker Select is set to TV Speaker.
− Voice Control Test: This test checks the volume level and clarity of your voice for use with Voice
Control. Select Start using your remote. After the test starts, say the test words listed in the
instructions as loudly and clearly as you can.
✎ If the test is not successful, select Retest, and then say the words loudly and clearly again.
To use the Voice Control function, follow these steps:
✎ If Voice Control function is set to On, the TV may be turned on automatically by effect of the ambient
environment.
1. Speak the Trigger Words that you selected into the microphone embedded in the TV or press the
VOICE˜ button on your remote. The TV displays the Voice Command Bar Size.
✎ When you use the Voice Control, the volume is set to 5 automatically.
2. Say a word or phrase listed in the Voice Command Bar Size.
✎ Pronounce the word or phrase clearly and correctly in the language you selected in Language.
3. Wait until recognition is complete, and then say the next command in the same fashion
✎ To exit the Voice Control mode, speak the Trigger Words or "Cancel" using the TV's
microphone, or press the RETURNR button.
Using the Voice Text Input Mode
1. Say "Search All" while in the Voice Control mode.
✎ When you use a QWERTY keypad screen, you can use the Voice Text Input Mode. Say the
Trigger Words that you selected into the microphone embedded in the TV or press the VOICE˜
button on your remote. You cannot use it for some UIs such as URL input boxes
2. Say the word or phrase you wish to search for.
3. The TV executes the spoken function.
✎ Voice Control performance levels will vary based on the language spoken.
English - 28
Motion Control
Menu ĺ System ĺ Voice and Motion Control ĺ Motion Control
Enable or disable the Motion Control function. Lets you control your TV by moving the TV cursor using
specific motions.
✎ Motion Control function can be affected recognition by motion posture, or ambient brightness
conditions.
✎
✎
✎
✎
Some applications may not support Motion Control.
You may experience physical fatigue when you use the Motion Control for a long time.
To use the Motion Control, please avoid direct sunlight.
We are recommended using Motion Control function within about 5 - 13 ft with your TV. TV
Camera's recognition range may differ depending on the angle of camera or other conditions. You
can check the recognition range of TV camera by using Motion Control Environment Test (System
ĺ Voice and Motion Control ĺ Motion Control ĺ Motion Control Environment Test).
■ Motion Control
Turns the Motion Control function on or off.
■ Motion Guide Bar Size
Set the Motion Guide Bar Size mode between Minimum or Full.
■ Motion Control Environment Test
You can test the brightness of room and the camera angle.
− Brightness Test: This test checks to see if your room is bright enough for Motion Control to work
properly. Select Start using your remote. The test will starts and should take only a few seconds.
(Appropriate ambient brightness: 50 ~ 500 Lux)
✎ Do not illuminating a sunlight or lights directly into the camera lens.
✎ Make sure that the camera lens is cloaked by an object.
− Camera Angle Test: On the Camera Angle Test screen, select Start using your remote. A
rectangle appears on the screen. Move yourself into the rectangle by adjusting the camera or
moving yourself in front of the camera. If you are not within the rectangle position, the test may not
work properly. After aligning your body with the TV, raise your hand while opening it toward the
screen, hold it for a moment and then wave it 3~4 times to the left and right.
To use the Motion Control function, follow these steps:
1. You use the Motion Control, raise your hand unfolding it toward the screen, hold it for a moment and
then wave it 3~4 time to the left and right. Motion Control starts. If the Motion Control starts, the
cursor is displayed at the center of the screen and the Motion Guide Bar Size is at the bottom of the
screen.
2. Control the TV using your hands.
✎ Note that the Motion Control function closes if your hands go out of the camera range.
✎ While using the Motion Control, if you use the other devices (i.e. remote control, keyboard, etc.),
Motion Control closes.
English - 29
Controlling the TV with your hands using motions
■
Access Motion Control
− Action: Spread your hand in the direction of the camera, and shake it three or four times from a
side to side.
■
Pointing Navigation
Moves the cursor to the position you want.
− Action: Spread your hand and guide the cursor to position you want.
■
Run
Selects an item or executes a command that is indicated by the cursor or is highlighted.
− Action: Clench your fist.
✎ When you watch some page or some image, you can move the page or image to direction you
want if it can be moved. In this case, use and keep the Run motion, and then move it to direction
you want. To move a page, clench your fist, keep it clenched, and then move it in the direction you
want the page to move. Note that not all pages can be moved.
■
Return
Return to the previous menu.
− Action: Spread your hand and rotate it counterclockwise.
■ Channel / Volume Control
Changes the channel or adjust the volume.
✎ If you use the Motion Control function while watching a channel, the channel / volume control
screen appears.
− Action: Use the Pointing Navigation motion to move the cursor to the channel or volume
controller, and then uses the Run motion to adjust the channel or volume.
✎ If you use the Run motion once, it has the same effect as pressing a button on your remote.
If you hold the Run motion, it has the same effect as pressing and holding a button on your
remote.
■
Scroll
Scroll the page in the direction you want. For example, suppose that you want to scroll down.
✎ Some applications may not support this function.
1. Move the cursor to the bottom of the screen (page scroll zone) using the Pointing Navigation
motion.
2. Move the cursor to the center of the screen using the Pointing Navigation motion.
3. The page will move down.
English - 30
Face recognition
™ ĺ Tools ĺ Settings ĺ Account Manager ĺ Face recognition
Enable or disable the Face recognition function. Face recognition lets you register your face with your
Samsung account. Also, you can log in to the Samsung account using the Face recognition function
without inputting your account ID or your account password.
✎ You can register your face in only one account.
To register your face in your Samsung account, follow these steps:
✎ To use this function, you must log into Smart Hub. If you don't have a Samsung Account, you
should create one before using this function. To create your Samsung Account, refer to “Creating an
Account” (Advanced Features ĺ Smart Hub) in the e-Manual.
1. On the Smart Hub screen, open the Tools menu using your remote, and then select Settings.
2. Select Account Manager. The Account Manager screen appears.
3. Select Face recognition. The Face recognition screen appears.
4. Move your face into the square in the center of the screen, and then wait until the square changes from
red to green.
✎ If Face recognition fails, select Retry and then try again.
5. When done, your face is now registered in your Samsung account. The Continue to Register Service
window appears.
✎ To close the window, select OK. You can register services later using Link to other accounts in
the Smart Hub menu (Settings ĺ Account Manager ĺ Link to other accounts).
English - 31
To log in to your Samsung account using Face recognition, follow these steps:
✎ If you use Face recognition to log into Smart Hub, it may be less secure than logging in with a
password.
1. With the Smart Hub screen displayed, select a using your
remote. The Samsung Account screen appears.
Log In
What is Samsung Account? A Samsung Account is an integrated
membership account that lets you access all the services
provided by Samsung through a single registered account.
Samsung Account
Press [Enter]
Password
Press [Enter]
Remember my password
Sign me in automatically
Log In
Cancel
Facial Recognition Mode
Create Account
RReturn
2. Select Face Recognition Mode. The Face recognition screen
appears.
Log In
You can log in using facial recognition. Turn your face
towards the TV with your face level with the camera.
✎ To return to the Samsung Account screen, select
Password mode.
Password mode
Pause
RReturn
3. The TV starts Face recognition. Face the front of the TV screen. The TV will recognize your face
automatically.
✎ A Green square indicates a registered face. A red-square indicates an unregistered face.
✎ If the TV fails to recognize your face, try again.
4. The TV logs you into your Samsung account automatically.
✎ If the TV recognizes two or more registered faces, the Samsung account list appears. Select your
account to log in.
✎ If your face is unregistered, you can register your face in your Samsung account. Follow steps 4
through 5 in the “To register your face to your Samsung account:” procedure above.
✎ If you have no account, you can create one. For more detailed information, refer to “Creating an
Account” (Advanced Features ĺ Smart Hub) in the e-Manual.
English - 32
The Evolution Kit Slot (Kit Sold Separately)
This socket is designed to accept an extension device called the Evolution Kit. The Evolution Kit enables
the TV to run a variety of the latest applications for a better user experience.
The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or
later.
English - 33
Connecting to a Network
You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
✎ After you have “physically” connected your TV to your network, you must configure the network
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 16) or after the Initial Setup process, through the TV’s menu (see page 36).
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
Wireless IP Router or Modem
that has a DHCP Server
The LAN Port on the Wall
LAN Cable (Not Supplied)
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. If you play video using IEEE 802.11a, b, or g, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or AP (typically a wireless router or modem) to transmit an encrypted
security code called an access key.
Your TV is compatible with the following security protocols:
Ř Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
Ř Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.
English - 34
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrated starting below:
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
(Not Supplied)
IP Router that has a
DHCP Server
LAN Cable
(Not Supplied)
LAN Cable
(Not Supplied)
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
✎ The TV does not support network speeds less than or equal to 10Mbps.
✎ Use Cat 5 or 6 (STP Type*) cable for the connection. (*Shielded Twisted Pair)
English - 35
Configuring Network Connections
After you have run the initial setup, you can configure or reconfigure the network connections through the
TV's menu.
Configuring a Wireless Network Connection
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to
configure network connections automatically. Most wireless networks use DHCP. If you have a Static IP
network, see the e-Manual for configuration instructions.
To configure the network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustration on page 34.
2. Turn on your TV, and then go to the Network Settings screen. (Menu ĺ Network ĺ Network
Settings)
3. Select Start. The Network function searches for available wireless networks. When done, it displays a
list of the available networks.
4. In the list of networks, move the highlight to select a network, and then select Next.
✎ If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow the
directions on the screen.
5. Enter your network security key or WPS PIN using your remote.
✎ Enter numbers and letters using your remote.
Ř If you are using the standard remote, you can enter numbers by pressing the number buttons
on your remote.
Ř To enter a letter, move the Highlight to the letter, and then select it. You can enter numbers in
the same fashion if you choose.
✎ To display capital letters (or redisplay small letters if capital letters are displayed), select Caps or
Shift.
✎ To display symbols and punctuation, select F. To redisplay letters, select F again.
6. When done, select Next if you have entered a security key or WPS PIN if you have entered a WPS PIN.
7. The TV checks the wireless connection. If the connection is successful, the “You are connected to the
Internet. If you have any problems using online services, please contact your Internet Service
Provider.” message appears. Select Next using your remote.
✎ For more detailed information, see “Setting up the Wireless Network” in the e-Manual.
✎ If you want to configure the connection manually, select IP Settings on the Network Connection
screen. Set IP Mode to Manual, and then enter the IP Address, Subnet Mask, Gateway, and
DNS Server manually.
English - 36
Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network
connections. Home networks that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.
If you have a Static IP network, see your user’s manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in one of the illustrations on page 35.
2. Turn on your TV, and then go to the Network Settings screen. (Menu ĺ Network ĺ Network
Settings)
3. Select Start.
4. The Network Connection screen appears, and verifies the network connection. When the connection
has been verified, the “You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider.” message appears. Network set up is
completed.
✎ If your TV cannot acquire network the connection values automatically or if you want to set the
connection manually, select IP Settings on the network connection screen. Set IP Mode to Manual,
and then enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
✎ For more detailed information, refer to “Setting up the Wired Network” in the e-Manual.
English - 37
The Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume
with just your fingertips while focusing on the TV screen. In addition, the built-in touch pad removes the
need for a mouse when you change the menu settings and search for something on the Internet.
✎ For more detailed information about Smart Touch Control, see "Using the Smart Touch Control" in
e-Manual.
Smart Touch Control
.*$
TV
Turns the TV on and off.
STB
BD
You can speak a voice command that
displayed to the TV using MIC. To use
MIC, press the VOICE˜ button on your
remote.
✎ Voice Control function can be
affected recognition by unclear
pronunciation, voice level, or
surrounding noise.
LED to show the active device.
Displays color and playing control
functions. You can select a function
using the Touch Pad.
Š: Displays a list of recently used
functions. You can select a function
again using the Touch Pad easily and
quickly.
y: Adjusts the Volume.
T: Quickly select frequently used
functions. Use this button in a specific
feature. For details, refer to e-Manual.
z: Changes channels.
Displays the shortcut functions list. You
can select a function using the Touch
Pad.
RETURNR: Returns to the previous
menu.
VOICE˜: Lets you access the Voice
Control function. When you press
the button, the TV displays the
command list. You can speak using the
microphone embedded in your remote.
✎ For more detailed information
about the Voice Control function,
see "SMART Interaction" in the
e-manual or see page 26.
RETURN
VOICE
NUMBERš: Displays the Number
button screen. You can select a number
using the Touch Pad.
NUMBER
Touch Pad
Ř Drag on the touch pad to move the
focus on the screen.
Ř Click on the touch pad to run the
focused item.
Ř If you don't press any button within
30 seconds, the Smart Touch
Control is set to Sleep mode
automatically. To wake up the Smart
Touch Control, press the Touch Pad.
Ř If you press and hold the Touch Pad,
it has the same effect as pressing
the MUTEM button on your
remote. However, this action scrolls
the page on a Web Browser.
Ř Tap on the touch pad or press the
RETURNR button to return to the
normal state.
Brings up the Smart Hub applications.
See the e-Manual chapter Advanced
Features ĺ Smart Hub.
✎ To exit an application that is
running easily, press the ™ button.
English - 38
Installing batteries (Battery size : AA)
1. Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up
in the direction of the arrow.
2. Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
3. Slide the cover down in the direction of the arrow to close the battery cover.
Initial Pairing for Smart Touch Control
After you have run the Initial Setup on your TV, you should connect your Smart Touch Control to your TV.
1. Point the Smart Touch remote control toward the TV's IR Blaster and press any key on the Smart
Touch remote control.
2. The connection icon appears at the bottom left of the screen and the Smart Touch remote control is
automatically connected to the TV.
✎ If you want to perform the pairing process again, press the reset button in the center of the back
cover using a pin or the tip of an unbent paper clip. The Smart Touch Control will be initialized.
Ř Smart Touch Control PAIRING Reset button.
Calibrating the Touch Pad
To calibrate the touch pad on the Smart Touch Control, follow these steps:
1. Press the NUMBERš button for 3 seconds. The calibration starts.
2. When done, all the LEDs on the top of the Smart Touch Control blink twice simultaneously.
✎ While calibrating, don't touch the touch pad.
✎ If the touch pad looses accuracy, re-calibrate the touch pad by repeating Steps 1 and 2.
English - 39
Using the Touch Pad
To display the shortcut functions list on the bottom of the screen, press the ‹ button at the bottom of the
touch pad. This list includes Menu, Source, Ch List, 3D, Support, and a number of other functions.
To display the color and playing control functions on the top of the screen, press the
top of the touch pad.
button on the
To Move the Highlight: Rest your finger on the touch pad, and then slide it from
one side to the other, from top to bottom, or bottom to top.
✎ To move the Highlight continuously, flick your finger across the touch pad
from right to left, left to right, top to bottom, or bottom to top.
MENU
RETURN
VOICE
NUMBER
SOURCE
To Select an item: Press the Touch Pad.
RETURN
VOICE
NUMBER
Open the History screen.: Press the Š button in the left of the Touch Pad.
Displays a list of recently used functions. You can select a function again using
the Touch Pad easily and quickly.
Open the Tools menu.: Press the T button in the right of the Touch Pad.
Quickly select frequently used functions.
English - 40
Open the color, playing control and exit buttons.: To display the color, exit
and play control buttons at the top of the screen, press the button at the
top of the touch pad.
e: Close all menus shown on the screen.
Open the shortcut functions screen.: Press the ‹ button in the bottom
center of the Touch Pad.
Quickly select frequently used functions:
RETURN
VOICE
NUMBER
Using the Scroll mode
If you press and hold the Touch Pad when using Web Browser, the Touch Pad switches to the Scroll
mode.
In the Scroll mode, slide your finger in the Touch Pad from one side to the other, the highlight moves page
units.
✎ To return to the general mode of the Touch Pad, press the Touch Pad or RETURNR button on your
Smart Touch Control.
To Enter a channel number through Smart Touch Control
1. While watching a broadcast, press the NUMBERš button on the Smart Touch Control. The TV
displays the number button screen.
2. Using the touch pad, highlight a number, and then press the touch pad. The TV displays a list of
channels that start with the number you selected.
3. Using the touch pad, highlight the channel in the list you want, and then press the touch pad.
✎ You can also change the channel by touching the up or down channel icon on the touch pad. If
you touch the touch pad immediately after, the TV displays the list of memorized channels. Select a
channel by moving or flicking your finger up or down, and then pressing the touch pad.
✎ If you change a channel by entering the channel number, that channel number is memorized and
added to the Added Ch. list automatically. You can change channels using the memorized channel
list easily and quickly.
English - 41
The IR Blaster
When you connect an IR Blaster with your TV, you can control connected external devices with your TV
using the Smart Touch Control.
✎ Install the IR Blaster within 50 cm and 45 degrees of the up, down, left and right directions of the IR
sensor of the external device.
IR Blaster
Pairing Button
OPEN
1
Power Switch
ON
OFF
Device Indicator LED
IR Blaster shows the pairing state.
PAIRING
2
1
OPEN
Installing batteries (Battery size : AA)
X
1
OPE
N
OPE
N
2
1
2
1
2
1
1
1
2
1
OPE
1
N
OPE
N
1. Hold the both sides of the battery holder and pull it out.
2. Install four batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
3. Push it back.
English - 42
IR Blaster Pairing
1. Turn the IR Blaster on, and if the LED blinks, connect the IR Blaster to the TV.
2. Briefly point the IR Blaster toward the IR sensor of the TV and press the PAIRING button at the bottom.
3. The connection icons appear on the bottom left of the screen, and the TV connects to IR Blaster
automatically.
✎ If the connection process failed, please turn off and on the IR Blaster, try again from step 2.
OPEN
PAIRING
ON
Ř IR Blaster PAIRING Reset button.
OFF
OPEN
Precautions for Using an IR Blaster
To use an IR Blaster, the IR Blaster must be located nearby with external devices connected to the TV.
Note that it should be no obstacle between the external device's IR receiver and an IR Blaster.
English - 43
Setting up the Universal Remote Control
Lets you control a Set-Top-Box (STB) or a BD player or both connected to the TV using your Smart Touch
Control. After you connect the device to the TV, the Smart Touch Control can control the navigation,
number, and other keys needed to operate and control the device.
To connect the external device to your Smart Touch Control, follow these steps:
1. When you connect IR Blaster for the first time, a
pop-up appears. Select Yes to set IR Blaster and
Smart Touch Control, and then press the touch
pad.
To use IR Blaster, universal remote control
setup needs to be complete. Do you want to
continue with setup?
Yes
2. To reset IR Blaster and Smart Touch Control,
press the ‹ button on Smart Touch Control,
.
and then select Set Up Universal Remote
3. Select Set up a device to control, and then
press the Touch Pad.
No
Set Up Universal Remote
What do you want to do?
Set up a device to control
View remote control settings
4. Select an external device from the connected
devices, and then press the Touch Pad.
Previous
Which Device you want to Control
Set-top Box
Blue-ray Player
Previous
Select a device to
control. The device
you select must be
connected to your TV.
5. Select the port used to connect the external
device, and then press the Touch Pad.
✎ Make sure that the selected device is on. If
it is turned off, turn the power on and press
Refresh.
Next
Which Input Source does Set-top Box use?
HDMI2
HDMI3
HDMI4
Video
Component
English - 44
Select the input source
that the Set-top Box is
conneted to.
Refresh
If the input source
you want to select is
deactivated, please
power on the device and
press the refresh button.
Previous
Next
6. Select Search Brands, and then press the
Touch Pad. A keyboard and an entry field appear.
Enter the first few letters of the brand name of
your device using the Smart Touch Control, and
then select Done at the bottom of the keyboard.
In the list that appears below the entry field,
select the brand name of your device, and then
press the Touch Pad.
What is the brand of Set-top Box
Search Brands
Previous
Check the brand
name of your Set-top
Box and select it from
the list. If you want
to search manually,
select ‘search brands’.
✎ If you want to search the brand of STB (Set-
Next
Top box), you can search the STB by using
the brand name or a cable provider.
7. Select Search Model, and then press the Touch
Pad. A keyboard and an entry field appear. Enter
the first few letters and numbers of the model
name of your device using the Touch Control,
and then select Done at the bottom of the
keyboard. In the list that appears below the entry
field, select the model name of your device, and
then press the Touch Pad.
What is the model number of your Set-top Box
Search Model
Recommended
Previous
Check the model
number of your
Set-top Box. Then
select ‘search model’
and enter the correct
model number for your
Set-top Box.
✎ If the search for model name does not work
Next
properly, search with a part of the model
name or use the Search for recommended
model code.
✎ For more information on the Search for
recommended model code function, refer to
page 46.
8. Select Download, and then press the Touch
Pad. Download the configuration data for the IR
Blaster in the same way.
Universal remote setup data will now be downloaded to your Smart
Touch control.
Press Download button on the TV Screen using your Smart Touch
Control.
Previous
Download
9. When all the settings are complete, select the
Done button and press the touch pad.
Universal remote setup complete
Congratulation! Your
Set-top Box-Samsung
connected on Component
is now ready.
Now, you can set your
remote to Watch Set-top
Box mode to control your
Set-top Box.
English - 45
Previous
Set up another
Complete
Using the Search for Recommended Model Code
1. In the Search for model name step in the
integrated remote control setup, select the
Recommended and press the touch pad.
What is the model number of your Set-top Box
Search Model
Recommended
Previous
Check the model
number of your
Set-top Box. Then
select ‘search model’
and enter the correct
model number for your
Set-top Box.
2. Select Download to download the
recommended model code.
Next
Universal remote setup data will now be downloaded to your Smart
Touch control.
Press Download button on the TV Screen using your Smart Touch
Control.
Previous
Download
3. Point the Smart touch remote control forward to
the TV's IR sensor and press the touch pad to
test if the device works.
Press the button below until the power is turned on and off on your
Set-top Box.
TEST
Previous
Next
Is it working?
Yes, go to the next step
No, try the test with a different code set
4. If the downloaded recommended model code
does not work, repeat the steps from step 3.
Press the button below until the power is turned on and off on your
Set-top Box.
TEST
Previous
Next
Is it working?
Yes, go to the next step
No, try the test with a different code set
✎ When you use the BD home theater by using Universal Remote, some buttons may not be supported.
In this case, we recommend to use Anynet+ (HDMI-CEC) function.
English - 46
How to view the e-Manual
You can find instructions for your TV’s features in the e-Manual. To open the e-Manual, press the
SUPPORT button on your standard remote or select Support using the Smart Touch Control.
You can also access it through the menu:
Menu ĺ Support ĺ e-Manual
Access the e-Manual
To use the e-Manual, follow these steps:
1. When you need help, select Support using your remote. The Support screen appears.
2. Select e-Manual using your remote. The e-Manual screen appears.
3. Select a desired category.
4. Select a desired topic. The e-Manual displays the page you want to see.
✎ Blue words in e-Manual signify menu options or selections on TV screen.
✎ Green icons in the e-Manual signify a button on your remote.
✎ Arrow steps (e.g. Menu ĺ Support ĺ e-Manual) in the e-Manual signify the sequence of steps
required to access an option or activate a function.
How to toggle between an e-Manual topic and the corresponding OSD menu(s).
Changing the Preset Picture Mode
Picture
Changing the Preset Picture Mode
Picture Mode
Picture
Picture Mode
Menu ĺ Picture ĺ Picture Mode
Picture Mode
Menu ĺ Picture ĺ Picture Mode
Picture Mode
Picture modes apply preset adjustments to the picture.
N When your TV is connected to a PC via the HDMI to DVI cable,
you can only select Entertain and Standard.
Backlight
Picture modes apply preset adjustments to the picture.
N When your TV is connected to a PC via the HDMI to DVI cable,
you can only select Entertain and Standard.
Backlight
Ř Dynamic
Contrast
Ř Dynamic
Contrast
Brightens the screen. Suitable for a bright room.
Brightens the screen. Suitable for a bright room.
Ř Standard
Brightness
Ř Standard
Brightness
Suitable for a normal environment.
Ř Natural for LED TV / Relax for PDP TV
Sharpness
Suitable for a normal environment.
Ř Natural for LED TV / Relax for PDP TV
Sharpness
Suitable for reducing eye strain.
Color
Tint (G/R)
Suitable for reducing eye strain.
Ř Movie
G50
Color
Darkens the screen, making it less glary. Suitable for watching
movies in a darkened room.
Tint (G/R)
✎ This function is not enabled in some menus.
✎ You can’t use the Try Now function if the menu is not available.
1. To go to the topic's corresponding menu option, select a using your remote.
2. To return to the e-Manual screen, select Support using your remote.
English - 47
Ř Movie
G50
Darkens the screen, making it less glary. Suitable for watching
movies in a darkened room.
Using the colored and function buttons with the e-Manual
Ř Scroll bar: Scroll the e-Manual screen up or down.
Ř l / r: Moves to the previous or next chapter.
Ř a Try Now: Move to the OSD menu that corresponds to the topic. To return to the e-Manual screen,
select Support using your remote.
Ř b Home: Moves to the e-Manual home screen.
Ř { Position: Each time you select {, you change the position of the e-Manual screen.
Ř } Index: Displays the Index screen.
Ř R Return: Return to the previous screen.
How to search for a topic on the index page
1. Select } using your remote. The Index screen appears.
2. To search for a topic, select a letter. The Index displays a list of topics and keywords that begin with the
letter you selected.
3. Select a topic or keyword you want.
4. The e-Manual page with the topic appears.
✎ To close the Index screen, press the RETURNR button.
To Change the screen position of the e-Manual
If the e-Manual screen is not invisible well because the OSD Menus screen, you can change the e-Manual
screen's position.
1. Move the Highlight to the e-Manual screen by pressing the SUPPORT button on your standard remote
or select Support using the Smart Touch Control.
2. Press the { button on your standard remote, or select { using the Smart Touch Control. Each time
you select {, the position of the e-Manual will change.
English - 48
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. Also review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.
com/support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Issues
Solutions and Explanations
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may
need to disable some of its energy efficient features such as the Eco
Sensor or the Energy Saving feature. Follow the steps below with your
remote to turn these features off or on.
Ř Energy Saving: User Menu ĺ System ĺ Eco Solution ĺ Energy
Saving
Ř Eco Sensor: User Menu ĺ System ĺ Eco Solution ĺ Eco Sensor
Component Connections /
Screen Color
If you find that the color on your Samsung television’s screen is not
correct or black and white, first run a Self Diagnosis on the TV to make
sure there are no device issues.
Ř Self Diagnosis: User Menu ĺ Support ĺ Self Diagnosis ĺ
Picture Test
If the problem does not appear in the Picture test, make sure:
Ř Your connections are all consistent. For example, if you’ve used the
AV In jack on your TV, make sure you have used the AV Out jack on
your video source.
Ř You have connected your devices to the correct jacks. For example, if
you use the Component jacks, labeled Pb, Pr, and Y, to connect your
TV and video source, make sure you have connected the blue Pb jack
on the video source to the blue Pb jack on the TV, and the yellow Y
jack on the source to the yellow Y jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little
too dark or bright, try adjusting the following settings in the Picture menu
option of the Main menu:
Ř Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and
so on.
Blur
If you find that there is a blur or “ghostlike” appearance to the images on
your television’s screen, you might be able to correct the blurring using
Auto Motion Plus.
Ř Auto Motion Plus: User Menu ĺ Picture ĺ Picture Options ĺ
Auto Motion Plus
English - 49
Issues
Solutions and Explanations
Unwanted Powering Off
If your Samsung TV appears to turn off by itself, there may be an issue
with either your Timer settings or your Eco friendly No Signal Power Off
feature.
First make sure Sleep Timer is not accidentally set. The Sleep Timer
turns off the TV automatically after a certain period of time has passed.
Ř Sleep Timer: User Menu ĺ System ĺ Time ĺ Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal
Power Off or Auto Power Off feature.
Ř No Signal Power Off: User Menu ĺ System ĺ Eco Solution ĺ No
Signal Power Off
Ř Auto Power Off: User Menu ĺ System ĺ Eco Solution ĺ Auto
Power Off
Trouble Powering On
Press the Power on button on the TV or remote. The light should
blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung
television, there are a number of things to check before making a call to
the service department.
If you’re sure your power cord, remote control, and PC are functioning
properly, you may be having a cable issue. If you have a cable or satellite
box, your TV may appear to be off because the cable or satellite box is
not outputting a signal. To test the signal output of your cable or satellite
box, press the guide or info button on the cable or satellite box remote
control. If the screen displays the guide or info data, the problem is
caused by the box.
Stand Assembly
If you have any trouble assembling the stand first, review "Install the
Stand" in the paper manual.
Cannot Find a Channel
Re-run Setup (Go to User Menu ĺ System ĺ Setup) or run Auto
Program. (Go to User Menu ĺ Channel ĺ Auto Program).
✎ For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/
spsn.
English - 50
Issues
The TV won’t turn on.
Solutions and Explanations
Ř Make sure the AC power cord is securely plugged in to the wall outlet
and the TV.
Ř Make sure the wall outlet is working.
Ř Try pressing the P button on the TV to make sure the problem is not
the remote. If the TV turns on, refer to “Remote control does not work”
below.
There is no picture/video.
Ř Check the cable connections. Remove and reconnect all cables
connected to the TV and external devices.
Ř Set the video outputs of your external devices (Cable/Sat Box, DVD,
Blu-ray etc) to match the TV's input connections. For example, if an
external device’s output is HDMI, it should be connected to an HDMI
input on the TV.
Ř Make sure your connected devices are powered on.
Ř Be sure to select the correct input source
Ř Reboot the connected device by unplugging it, and then reconnecting
the device’s power cable.
The remote control does not
work.
Ř Replace the remote control batteries. Make sure the batteries are
installed with their poles (+/–) in the correct direction.
Ř Clean the sensor’s transmission window on the remote.
Ř Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote Ř Program the Cable/Set remote control to operate the TV. Refer to the
control doesn’t turn the TV on
Cable/Set-Top-Box user manual for the SAMSUNG TV code.
or off, or adjust the volume.
✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to
produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no
impact on the performance of the product.
✎ To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by
USB (samsung.com ĺ Support ĺ Downloads).
English - 51
Licenses
Storage and Maintenance
✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker.
Please clean the debris off before watching TV.
✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior
and screen carefully using the cloth provided or a soft cloth to prevent scratches.
Do not spray water directly onto the product. Any
liquid that goes into the product may cause a
failure, fire, or electric shock.
Clean the product with a soft cloth dampened with
a small amount of water. Do not use a flammable
liquid (e.g. benzene, thinners) or a cleaning agent.
English - 52
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing
on the TV may cause the TV to fall. In
particular, ensure your children do not
hang over or destabilize the TV. Doing
so may cause the TV to tip over, causing
serious injuries or death. Follow all safety
precautions provided in the Safety Flyer
included with your TV. For added stability
and safety, you can purchase and install
the anti-fall device as described below.
The TV-Holder Kit (Sold Separately):
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw
and molly, or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to.
We recommend a size M4xL20 wood screw.
TV-Holder (BN96-15753A)
Screw (M8 X L19)
Installing the TV-Holder
1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the
screw included in the TV-Holder Kit that is designated for your TV.
✎ Make sure to use only the appropriate supplied screw. If you use a different screw, you can
damage your TV.
2. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to
be installed.
✎ If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not
possible, use a molly to anchor the screw.
English - 53
3. Tie the TV-Holder cord to the screw fastened to the wall or cabinet so that the TV is fixed. See the
illustrations below.
✎ Install the TV close to the wall so that it does not fall.
✎ When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted
downwards for safety purposes.
✎ Check the cord occasionally to make sure it is secure.
✎ Before moving the TV, separate the connected cord first.
4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or
failure. If you have any doubt about the security of your connections, contact a professional installer.
To purchase the TV-Holder Kit, contact Samsung Customer Care
Ř In the United States: 1-800-SAMSUNG (1-800-726-7864)
Ř In Canada: 1-800-SAMSUNG (1-800-726-7864)
English - 54
Specifications - Smart Touch Control
Model Name
Power
Source
Compatibility
LED TV
RMCTPE1
Battery (AA x 2)
To extend the battery life, use of alkaline battery is recommended
Above LED E7500
PDP TV
E8000
Dimension
(W x H x D)
Weight
2.0 x 6.1 x 0.7 inches
(52.0 x 154.0 x 19.5 mm)
Without Batteries
Including Batteries
0.1 lbs (84.0 g)
0.2 lbs (130.0 g)
Specifications - IR Blaster
Model Name
Power
Source
Compatibility
LED TV
VG-IRB2000
Battery (AA x 4)
To extend the battery life, use of alkaline battery is recommended
Above LED E7500
PDP TV
E8000
Dimension
(W x H x D)
Weight
3.7 x 2.6 x 3.1 inches
(95.0 x 65.0 x 79.0 mm)
Without Batteries
Including Batteries
0.1 lbs (86.5 g)
0.3 lbs (178.5 g)
English - 55
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
0˚
Model Name
UN46ES8000
UN55ES8000
Screen Size
(Diagonal)
46˝ Class
(45.9˝ measured diagonally)
55˝ Class
(54.6˝ measured diagonally)
Sound
(Output)
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
10 W X 2
40.8 x 24.2 x 1.2 inches
(1038.7 x 614.7 x 30.8 mm)
40.8 x 25.7 x 8.2 inches
(1038.7 x 653.7 x 210.0mm)
48.4 x 28.4 x 1.2 inches
(1230.3 x 722.3 x 30.8 mm)
48.4 x 29.9 x 8.2 inches
(1230.3 x 761.6 x 210.0 mm)
26.4 lbs (11.9 kg)
32.1 lbs (14.6 kg)
36.5 lbs (16.6 kg)
42.5 lbs (19.3 kg)
Model Name
UN60ES8000
Screen Size
(Diagonal)
60˝ Class
(60.0˝ measured diagonally)
Sound
(Output)
Dimensions (W x H x D)
Body
With stand
10 W X 2
53.8 x 31.8 x 1.2 inches
(1368.5 x 808.8 x 31.5 mm)
53.8 x 33.3 x 8.2 inches
(1368.5 x 847.9 x 210.0 mm)
Weight
Without Stand
With Stand
✎
✎
✎
✎
45.3 lbs (20.5 kg)
51.8 lbs (23.5 kg)
Design and specifications are subject to change without prior notice.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
This device is a Class B digital apparatus.
For information about the power supply, and more about power consumption, refer to the label
attached to the product.
✎ Typical power consumption is measured according to Energy Star Program requirements for
Televisions.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
English - 56
Display Resolution
If you have attached the TV to your PC, you can select one of the standard resolutions listed in the
Resolution column. The TV will automatically adjust to the resolution you choose.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
49.702
63.981
79.976
47.712
55.935
60.000
65.290
67.500
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
59.810
60.020
75.025
59.790
59.887
60.000
59.954
60.000
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
83.500
108.000
135.000
85.500
106.500
108.000
146.250
148.500
-/-/-/-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
-/+
+/+
-/+
+/+
✎ NOTE
Ř The interlaced mode is not supported.
Ř The set might operate abnormally if you select a non-standard video format.
English - 57
Video Codec
File Extension
Container
Video Codec
Resolution
Frame rate (fps)
Bit rate (Mbps)
Audio Codec
DIVX 3.11/4.x/5.x/6.1
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
*.webm
WebM
MPEG4 SP/ASP
H.264 BP/MP/HP
Motion JPEG
1920 x 1080
Window Media Video v9
30
6 – 30
MPEG2
MPEG1
VP6
640 x 480
4
SVAF
30
MVC
1920 x 1080
VP8
24 / 25 / 30
40
6 – 30
8
AC3
LPCM
ADMPCM(IMA,
MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
DRA
Vorbis
Other Restriction
✎ Video content will not play, or not play correctly, if there is an error in the content or the container.
✎ Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible
Frame/sec listed in the table above.
✎
✎
✎
✎
If the Index Table is damaged, the Seek (Jump) function is not supported.
When you play video over a network connection, the video may not be played smoothly.
The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
Some USB/digital camera devices may not be compatible with the player.
Video decoder
Ř Supports up to H.264, Level 4.1
Ř H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
Ř For all Video codecs except MVC, VP8, VP6:
− Below 1280 x 720: 60 frame max
− Above 1280 x 720: 30 frame max
− GMC 2 over is not supported.
Ř Supports only SVAF Top/Bottom and Side by Side.
Ř Supports only BD MVC Spec.
Audio decoder
Ř WMA 10 Pro supports up to 5.1 channel. WMA lossless audio is not supported.
Ř RealAudio 10 lossless is not supported.
Ř QCELP, AMR NB/WB are not supported.
Ř If Vorbis is only in Webm container, supports up to 2 channel.
English - 58
Dimensions
■ Jack panel detail / Rear view
6
2
1
4
3
5
(Unit: inches)
Model name
1
2
3
4
5
6
UN46ES8000
15.7
15.7
27.7
4.9
4.7
3.8
UN55ES8000
15.7
15.7
33.1
6.2
4.6
7.3
UN60ES8000
15.7
15.7
35.8
8.9
6.0
9.3
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior
notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical
or printed errors.
© 2012 Samsung Electronics America, Inc
English - 59
Index
A
S
Assembling the Stand Wire Holder ....................... 5
Securing the TV to the Wall................................. 53
Auto Program ..................................................... 18
Setting up the Universal Remote Control ............ 44
SMART Interaction ............................................. 26
C
Software Upgrade .............................................. 18
Calibrating the Touch Pad ................................... 39
Specifications ..................................................... 56
Changing the Input Source ................................. 24
Store Demo ........................................................ 16
Clock .................................................................. 19
Configuring the Basic Settings in Initial Setup ..... 16
T
Connecting the Power Cord
and the Antenna or Cable Connection ................ 12
The Evolution Kit Slot (Kit Sold Separately).......... 33
Connecting to a Network .................................... 34
The Smart Touch Control .................................... 38
Connecting to a PC ............................................ 23
To Change
the screen position of the e-Manual .................... 48
Connecting to Audio Devices.............................. 22
Connecting to AV Devices .................................. 20
Controlling the TV
with your hands using motions ........................... 30
The IR Blaster ..................................................... 42
To register
your face in your Samsung account .................... 31
Trigger Words ..................................................... 27
Troubleshooting .................................................. 49
D
Display Resolution .............................................. 57
U
Use Mode........................................................... 16
F
Using Smart Hub ................................................ 25
Face recognition ................................................. 31
Using the Touch Pad .......................................... 40
Using the TV's Controller (Panel Key) .................. 11
H
Using the Voice Text Input Mode......................... 28
Howling .............................................................. 27
How to Use Edit Name ....................................... 24
V
How to view the e-Manual .................................. 47
Video Codec ...................................................... 58
Voice Command Bar Size ................................... 27
I
Voice Control ...................................................... 26
Initial Pairing for Smart Touch Control ................. 39
Voice Control Environment Test .......................... 28
Installing the Wall Mount (Optional) ....................... 8
Voice Sensitivity .................................................. 27
IR Blaster Pairing ................................................ 43
L
Language ........................................................... 27
Licenses ............................................................. 52
M
Menu Language ................................................. 16
Motion Control.................................................... 29
Motion Control Environment Test ........................ 29
Motion Guide Bar Size ........................................ 29
English - 60
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
Ř Reorient or relocate the receiving antenna.
Ř Increase the separation between the equipment and receiver.
Ř Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Ř Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
English - 61
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
English - 62
Contact SAMSUNG WORLDWIDE
If you have any questions or comments about Your Samsung TV, please contact the SAMSUNG customer care center.
Country
Customer Care Center
1-800-SAMSUNG (726-7864)
Web Site
Address
CANADA
www.samsung.com
U.S.A
1-800-SAMSUNG (726-7864)
www.samsung.com
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc. 85 Challenger Road
Ridgefield Park, NJ 07660
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04033A-03
SMART TV
QUICK SETUP GUIDE
Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while focusing
on the TV screen. In addition, the built-in touch pad removes the need for a mouse when you change the menu settings and search for
something on the Internet.
% For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide (‹ ĺ Support
ĺ Smart
Touch Control Guide).
% Voice Control performance levels will vary based on the language spoken.
% Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.
.*$
TV
STB
BD
Turns the TV on and off.
You can use MIC to instruct a Voice Control
command. To activate MIC, simply press the
VOICE˜ button.
LED to show the active device.
Shows the color button, exit button and play control
buttons.
Š: Displays a list of recently used functions.
y: Adjusts the Volume.
T: Quickly select frequently used functions.
z: Changes channels.
Displays the shortcut functions list.
Touch Pad
RETURNR: Go to previous menu screen.
VOICE˜: Take your voice command and
enter a text using your voice.
NUMBERš: Displays the Number button
screen. Select a digit using the touch pad.
RETURN
VOICE
NUMBER
Brings up the Smart Hub applications.
Ř Scratch on the Touch Pad to move the focus on the
screen.
Ř Click on the Touch Pad to run the focused item.
Ř Tap on the Touch Pad and hold to select the function
the same as the MUTEM button of the remote
control. However, this action scrolls the page on a
Web Browser.
Ř Tap on the Touch Pad or press the RETURNR
button to return to the normal state.
% If no button is pressed for 30 seconds, the Touch
Pad is automatically turned off.
% To use the Touch Pad again, press any button.
Installing batteries (Battery size : AA)
1 Press the back of the remote at the very bottom
with both thumbs, and then slide the battery
cover up in the direction of the arrow.
2 Install two batteries so that the polarity of the
batteries (+/-) matches the illustration in the
battery compartment.
3 Slide the cover down in the direction of the arrow
to close the battery cover.
Y
X
Initial Pairing
1 Press any buttons on the Smart Touch Control toward the Remote receiver of TV’s.
2 The connection icons appear on the bottom left of the screen, and the TV connects to your
Smart Touch Control automatically.
% If you want to perform the pairing process again, press the PAIRING button in the center of
the back cover. The Smart Touch Control will be initialized.
English - 2
SMART Interaction (Voice and Motion Control)
Using this function, you can access and control menu options and functions using speech or motions.
% For more detailed information about Smart Interaction, see “Smart Interaction” in e-Manual or User manual.
% The illustration of the manual may vary from the actual shape partially.
Voice Control Environment
Ř We are recommended using Voice Control function within about 13 ft with your TV.
You can check the usable distance by using Voice Control Environment Test (System ĺ Voice and Motion Control ĺ Voice Control ĺ Voice
Control Environment Test).
Ř Voice Control function can be affected recognition by unclear pronunciation, voice level, or surrounding noise.
Motion Control Environment
We are recommended using Motion Control function within about 5 - 13 ft with your TV. TV Camera’s recognition range may differ depending on the
angle of camera or other conditions.
You can check the recognition range of TV camera by using Motion Control Environment Test (System ĺ Voice and Motion Control ĺ Motion
Control ĺ Motion Control Environment Test).
Voice Control
You can use only your voice to switch the channel or adjust the volume level while focusing on the TV screen, which removes the need for the
conventional remote control.
Menu ĺ System ĺ Voice and Motion Control ĺ Voice Control
1 Set Voice Control to On.
2 If you set Trigger Words to Hi TV, say “Hi
TV”, and then basic available commands
such as TV Power Off are displayed on
the screen.
3 To adjust the volume, simply say “Volume
up” or “Volume down”.
4 To see more commands, say “More
Commands”.
HI TV.
TV Power Off.
“More Commands”
TV Power Off
Channel
Number
Source
Channel Up/
Down
Mute
Volume Up/
Down
More Commands
% You can select the Trigger Words that start the Voice Control function. Alternatively you can turn on your TV using the Trigger Words if
Voice Control function is set to On.
− If the Trigger Words is set to Hi TV, say Hi TV Power On.
− If the Trigger Words is set to Smart TV, say Smart TV Power On.
Motion Control
Use a specific motion to switch the channel or adjust the volume level as well as to move the mouse pointer to a desired position while in web
surfing with Smart Hub.
Menu ĺ System ĺ Voice and Motion Control ĺ Motion Control
1 Set Motion Control to On.
2 TYou use the Motion Control, raise your
hand unfolding it toward the screen, hold it
for a moment and then wave it 3~4 times
to the left and right. Motion Control starts.
If the Motion Control starts, the cursor is
displayed at the center of the screen and
the Motion Guide Bar is at the bottom of
the screen.
3 To switch the channel, point your hand to
the channel up or down icon on the screen,
and make a fist. If you hold the Run motion
at the channel icon position, the channel
will be changed continuously.
All
Pointing Navigation
Run
% Motion Control function can be affected recognition by user’s location, motion posture, or ambient brightness conditions.
% If it doesn’t work, adjust the angle of TV camera by using Motion Control Environment Test (System ĺ Voice and Motion Control ĺ
Motion Control ĺ Motion Control Environment Test).
English - 3
Smart Hub
Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or free of-charge applications and view
them on your TV.
Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games.
For more detailed information about Smart Hub, see “Smart Hub” in e-Manual.
% The illustration of the manual may vary from the actual shape partially.
Method 1
Menu ĺ Support ĺ Smart Hub
Method 2
Press the
button on the remote control.
Main Features
Displays the recommended
service by Samsung.
You can search for various
types of content that can be
used on your TV.
Search
Displays the current input
source screen.
AccuWeather BBC News
Youtube
Skype
Displays notices, new
applications, and
advertisements brought to
you by Samsung product
introductions.
Picasa
You can experience various
service provided by Samsung.
Channel
Web Browser
Schedule Manager
Source
AllShare Play
a Log In b Wallpaper T Tools R Return
Displays the installed
applications in the TV.
Operation button
Ř The displayed image may differ depending on the model.
Creating Your Samsung Account
If you have Samsung account, you can use Smart Hub easily.
1 Press the
button on the remote control, Press the red a button on the remote
control to display the Login window.
% When using the Smart Touch Control, press the ReturnR button to close the
button screen and use.
2 When the Login window appears, select the Create Account button.
3 Move to the Samsung account field, and then press the E button. A window
appears with an entry screen and a keypad. The ID must be a valid e-mail address
in the following format: sample@sample.com or sample@sample.net. The same
password in the confirm password field in the same fashion.
% If you have a Bluetooth or USB keyboard connected to the TV, enter your e-mail address
using a Bluetooth or USB keyboard. When done, enter the password in the same way.
4 After entering all items, move to the Create Account item, and then the E button.
Your account will be created.
Login
What is Samsung Account? A Samsung Account is an integrated
membership account that lets you access all the services provided
by Samsung through a single registered account.
Samsung account
Press [Enter]
Password
Press [Enter]
Ƒ Remember my password
Ƒ Sign me in automatically
Login
Cancel
Face recognition Mode
Create Account
R Return
Downloading an app from Samsung Apps
Samsung Apps is a store from which you can download applications to use on Samsung TV/AV equipment.
Search
AccuWeather BBC News
Channel
Web Browser
BN68-04374A-04
Youtube
Schedule Manager
Skype
Picasa
Source
1 Press the
button on the remote control, and select Samsung Apps on the
screen.
2 Go to your desired category, and select an app.
3 In the information screen for the selected app that appears, choose Download
to install it.
4 After it is downloaded, choose Run to launch and enjoy it.
% You can find the icon of the newly installed app on the SMART HUB screen.
% Paid App in Samsung Apps Account registration is required.
English - 4
E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
Preference Features
Channel Menu
• Using the Channel Menu
1
• Connecting to the Network
82
• Memorizing Channels
30
• Setting up the Wired Network
90
• Other Features
34
• Setting up the Wireless Network
100
• Managing the Network Connected Devices
120
• Setting the Time
126
• Blocking Programs
135
• Economical Solutions
149
• Picture In Picture (PIP)
152
• Using the TV with a Keyboard and a Mouse
156
• Other Features
162
• Support Menu
180
Basic Features
• Changing the Preset Picture Mode
38
• Adjusting Picture Settings
41
• Changing the Picture Size
45
• Changing the Picture Options
52
• Using the TV with Your PC
67
• Changing the Preset Sound Mode
70
• Adjusting Sound Settings
72
Advanced Features
• Using the 3D function
198
• SMART Interaction
315
• Smart Hub
213
• Specification for SMART Interaction
346
• Customizing the Home Screen
230
• AllShare Play
357
• Using the Samsung Apps
253
• Using the AllShare Play
373
• Search
262
• My List (In AllShare Play)376
• Your Video
268
• Videos (In AllShare Play)383
• Family Story
270
• Photos (In AllShare Play)397
• Fitness
277
• Music (In AllShare Play)410
• Kids
282
• Using the DLNA Function
421
• Web Browser
293
• Using the MHL function
429
• Skype
313
• Anynet+ (HDMI-CEC)
434
Other Information
• Troubleshooting447
• 3D (Troubleshooting)
480
• Picture (Troubleshooting)
458
• Anynet+ (HDMI-CEC) (Troubleshooting)
482
• Sound (Troubleshooting)
464
• AllShare Play (Troubleshooting)
488
• RF (Cable / Antenna) Connection
(Troubleshooting)467
• Smart Hub (Troubleshooting)
489
• Web Browser (Troubleshooting)
491
• PC Connection (Troubleshooting)
469
• Using the Smart Touch Control
498
• Network Connection (Troubleshooting)
470
• Others (Troubleshooting)
471
• Supported Subtitle
and AllShare Play file formats
522
• Anti-theft Kensington Lock
531
• Licenses535
Using the Channel Menu
Channel
™ → Channel
Using this function, you can add or delete
channels, set favorite channels, edit the
channel name for analog broadcasts.
NN The American Academy of Pediatrics
discourages television viewing for
children younger than two years of age.
●● All
Shows all channels.
●● Added Ch.
Shows all added channels. These are the
channels that appear when you select CH
List for Smart Touch Control or press the CH
LIST button. for Standard Remote Control
●● Favorites 1 – Favorites 5
Shows all favorite channels, in up to five
groups. Each group has separate channels.
NN The TV displays Favorites only if you have
added favorites using Edit Favorites.
NN If the Highlight located in the Favorites 1
– Favorites 5 category, you can change
the name of category by selecting b
using your remote.
●● Recently Viewed
Shows the most recently viewed channels.
●● Mostly Viewed
Shows the most frequently viewed channels.
Using the colored and function buttons with the
Channel
●● When the Highlight located in the category,
you can use these options:
–– a Air / Cable
Switches the mode and display between
Air and Cable.
NN Appears only if your TV stored both
Air and Cable.
–– R Return
Return to the previous menu.
●● When the Highlight located in the channel
list, you can use these options:
–– a Air / Cable
Switches the mode and display between
Air and Cable.
NN Appears only if your TV stored both
Air and Cable.
–– b Delete
Delete the selected channel(s).
–– ` Information
Displays details of the selected channel.
–– k Page
Scrolls the channel list to the next or
previous page.
–– E Select / Deselect
Select or deselect a channel.
–– T Tools
Displays the option menu.
–– R Return
Return to the previous menu.
Using the Tools menu with Channel
●● Add / Delete
Delete a channel from or add a channel to
the Channel list.
To delete a channel in Channel, follow these
steps:
1.If you want to delete a channel, select a
category of the channel.
2.Select a channel in the category. A c
mark appears to the left of the channel.
NN You can select more than one channel.
NN If you select the selected channel
again, a c mark disappears.
3.Open the Tools menu using your remote.
4.Select the Delete. The message Deleted
the selected channel(s). appears, and then
select OK.
NN You can delete the selected channel
immediately by selecting b using your
remote.
NN When you delete a channel in the Recently
Viewed or Mostly Viewed category, the
channel will disappear from the category
list. But, the channel is not deleted.
To add a channel in Channel, follow these
steps:
1.On the Channel screen, select the All
category.
2.Select a grayed out channel in the All
category. A c mark appears to the left
of the channel.
NN You can select more than one channel.
NN If you select the selected channel
again, a c mark disappears.
NN A gray colored channel indicates the
channel has been deleted.
3.Open the Tools menu using your remote.
4.Select the Add. The message Added the
selected channel(s). appears, and then
select OK.
NN The Add menu option only appears for
deleted channel.
NN All deleted channels will be shown on the
All category. You add channels back to the
Added Ch. category on the All category.
●● Edit Favorites
Sets channels you watch frequently as
favorites, or removes a channel from list of
favorites using the Tools menu.
To set channels as favorites, follow these
steps:
1.Select the All or Added Ch. category.
2.Select a channel in the category. A c
mark appears to the left of the channel.
NN You can select more than one channel.
NN If you select the selected channel
again, a c mark disappears.
3.Open the Tools menu using your remote.
4.Select the Edit Favorites. The Edit
Favorites screen appears.
5.Select a using your remote. The selected
channel will be moved to the favorite
group.
NN Also, you can select a channel in the
Edit Favorites screen.
NN You can add a favorite channel to any
one of the groups. To change favorites
group, select } using your remote.
Each time you select }, a favorites
group will be changed.
6.When done, select OK. The channel is
made as a favorite and is assigned to the
favorite group you selected.
NN The TV displays the “ ” symbol
next to the channel, indicating it is a
favorite.
Using the colored and function buttons with
the Edit Favorites
●● When the Highlight located in the Added
Ch., you can use these options:
–– a Add
Add selected channels to the favorites
group.
–– } Change Fav.
Change the favorites group. Each time
you select } using your remote, a
favorites group will be changed.
–– Ÿ Go To
Move to the Highlight to a channel
number immediately by pressing the
number button using your remote.
–– R Return
Return to the previous menu.
●● When the Highlight located in the
favorites group, you can use these
options:
–– a Delete
Delete the selected channel.
–– b Change order
Change the favorites group list order.
–– { Copy
Copy a selected channel to other
favorites groups.
–– } Change Fav.
Change the favorites group. Each time
you select } using your remote, a
favorites group will be changed.
–– Ÿ Go To
Move to the Highlight to a channel
number immediately by pressing the
number button using your remote.
–– R Return
Return to the previous menu.
To remove a channel from the list of
favorites, follow these steps:
1.Select the favorites group category.
2.Select a channel in the selected favorites
group. A c mark appears to the left of
the channel.
NN You can select more than one channel.
NN If you select the selected channel
again, a c mark disappears.
3.Open the Tools menu using your remote.
4.Select Delete. The message Do you want
to delete the selected item(s)? appears.
5.Select OK. The message Deleted the
selected item(s). appears.
NN You can delete the selected channel from
the list of favorites group immediately by
selecting b using your remote.
●● Rename Channel
(Appears only if you have selected an analog
channel.)
Lets you assign a name of up to five
characters to an analog channel. For
example, Food, Golf, etc. This makes it easier
to find and select a channel.
●● Select All / Deselect All
Select all channels in the list. / Deselect all
channels you selected.
Display Icons Used in the Channel screens
: An analog channel.
: A favorite channel.
: A locked channel.
Schedule Manager
™→ Schedule Manager
Using this function, you can set the TV to
display a desired channel automatically on a
day and at a time of your choice.
NN You must set the current time first using
the Time → Clock function in System
menu to use this function.
To use the Schedule Viewing, follow these
steps:
1.On the Schedule Manager screen, select
a using your remote.
2.Set Antenna, Channel, Repeat, and Start
Time.
●● Antenna
You can view an antenna source. If your
TV has digital broadcasts, you can change
a source from analog to digital.
If you want to change an antenna source
between Air and Cable, select an antenna
source you want in Antenna menu
(Channel → Antenna).
●● Channel
Select the desired channel.
NN You can only select memorized
channels.
●● Repeat
Select Once, Manual, Sat~Sun, Mon~Fri
or Everyday. If you select Manual, you can
set the day you want.
NN The c mark indicates a day you’ve
selected.
Date: You can set a desired date.
NN The Date is available only when you
select Once in Repeat.
●● Start Time
You can set the start time you want.
3.When done, select OK. The selected
channel is scheduled for viewing.
NN On the Schedule Manager screen, you
can check a list of Schedule Viewing.
To delete an item in a list of scheduled
viewing, follow these step:
1.On the Schedule Manager screen,
highlight an item you want to delete.
2.Open the Tools menu using your remote.
3.Select Cancel Schedule. The Cancel
selected list(s)? message appears.
4.Select Yes. The selected schedule will be
canceled.
NN If you press the INFO
button for Standard Remote Control or select
Info for Smart Touch Control after highlighting
an item, the Information screen appears.
On the Information screen, you can
change or cancel the Schedule Viewing.
Cancel Schedule: Cancel the Schedule
Viewing.
Edit Schedule: Change the Schedule
Viewing.
Return: Return to the previous screen.
Channel List
Using this function, you can view channel list,
program information, favorite channel, and
manage schedules of timer viewing.
1.Press the CH LIST
button for Standard Remote Control or select
CH List for Smart Touch Control . The Channel
List screen is displayed immediately.
2.Change a channel or channel list mode.
●● Added Ch.
Shows all added channels.
●● Favorites 1 – Favorites 5
Shows all favorite channels, in up to five
groups. Each group has a separate screen.
NN The TV displays favorite groups only
if you have added favorites using Edit
Favorites.
Using the colored and function buttons with the
Channel List
NN If you press the INFO
button for Standard Remote Control or select
Info for Smart Touch Control , the TV displays
details of the selected program.
●● a Antenna
Switches the mode and display between Air
and Cable.
NN Appears only if your TV stored both Air
and Cable.
●● { Program View / Channel View
For digital channels, switches the display
between Program View and Channel View.
When you select a digital channel in Channel
List, select once to display a list of programs
on that channel. select again to re-display
the Channel View.
●● lr CH Mode / Channel
On Channel View screen, Toggles between
the Favorites list (if you have added favorites
using Edit Favorites) and the Added Ch. list. /
On Program View screen, change a channel.
●● E Watch / Information
Displays the channel you selected. / Displays
details of the selected channel.
●● k Page
Scrolls the Channel List to the next or
previous page.
Display Icons Used in the Channel List screens
: An analog channel.
: A reserved program.
: A locked channel.
Using the Schedule Viewing in Channel List
(digital channels only)
You can use the Schedule Viewing in Channel
List to schedule a digital channel program for
viewing. The TV will turn on and display the
digital channel program when the program
begins.
1.Press the CH LIST
button for Standard Remote Control or select
CH List for Smart Touch Control . The Channel
List screen appears.
2.Select a desired digital channel.
3.Select { using your remote. The TV
displays program list of the selected
channel.
4.Select a desired program in the program
list, and then select Information using your
remote.
5.On the Information screen, select the
Schedule Viewing. The selected program is
set to Schedule Viewing.
NN If you want to cancel the Schedule
Viewing, follow Steps 1 through 4, and
then select the Cancel Schedule.
Memorizing Channels
Antenna
Menu → Channel → Antenna
Before your television can memorize the
available channels, you must select your
TV's signal source, Air (using an antenna) or
Cable. Select Air or Cable. After you have
selected the signal source, go on to the Auto
Program function.
NN Selecting the signal source using the
Antenna function also determines the
signal source the TV is tuned to. For
example, if you receive your TV signal
over the air, and you select Cable, you will
see only snow. You must select Air to see
a picture.
Auto Program
Menu → Channel → Auto Program
The Auto Program function memorizes all
channels that are available over the air or
through your cable system and adds them to
the Channel list.
To start the Auto Program, follow these
steps:
1.Go to the Auto Program menu.
2.Select Air or Cable or both, and then
select Next. A c mark appears in the
check box.
NN If you selected Air or Cable in the
Antenna menu, your choice will
already be selected.
3.If you selected the Cable, the cable system
screen appears. Select the Digital Cable
System.
NN If you selected the Air only, the Auto
Program starts.
4.Select the correct cable signal format STD, HRC or IRC.
NN Most cable systems use STD (Standard).
5.Repeat for Analog Cable System.
6.Select Next. The Auto Program starts.
NN After all the available channels are
stored, the Auto Program removes
scrambled channels. When done, the
Auto Program menu then reappears.
This process can take up to 30 minutes.
Other Features
Clear Scrambled Channel
Menu → Channel → Clear Scrambled Channel
This function filters out scrambled channels
after the Auto Program is completed. This
process may take up to 30 minutes.
NN This function is only available in Cable
mode.
How to Stop the Clear Scrambled Channel
function
1.To stop the Clear Scrambled Channel
function, select Stop.
2.The message Stop searching for
scrambled channels? appears. Select Yes.
3.The Clear Scrambled Channel function will
be stopped.
Fine Tune
Menu → Channel → Fine Tune
(analog channels only)
If the reception is clear, you do not have
to fine tune the channel, as this is done
automatically during the search and store
operation. If the signal is weak or distorted,
fine tune the channel manually. Scroll to the
left or right until the image is clear.
NN Select the channel, and then select Fine
Tune.
NN Fine tuned channels that have been saved
are marked with an asterisk “*” on the
right-hand side of the channel number in
the channel banner.
NN To reset fine-tuning, select the channel,
select Fine Tune, and then select Reset on
the Fine Tune screen.
Crosstalk Noise Reduction
Menu → Channel → Crosstalk Noise Reduction
(analog channels only)
This function reduce diagonal noise in picture
caused by the crosstalk of signals. If your TV
displays with a noise while watching TV, turns
on this function.
Changing the Preset Picture Mode
Picture Mode
Menu → Picture → Picture Mode
Picture modes apply preset adjustments to
the picture.
NN When your TV is connected to a PC via
the HDMI to DVI cable, you can only select
Entertain and Standard.
●● Dynamic
Brightens the screen. Suitable for a bright
room.
●● Standard
Suitable for a normal environment.
●● Natural for LED TV / Relax for PDP TV
Suitable for reducing eye strain.
●● Movie
Darkens the screen, making it less glary.
Suitable for watching movies in a darkened
room.
●● Entertain
Sharpens the picture. Suitable for games.
NN Only available when the TV is connected
to a PC via the HDMI to DVI cable.
Adjusting Picture Settings
Backlight
for LED TV
/ Cell Light
for PDP TV
Menu → Picture → Backlight / Cell Light
Adjusts the brightness of the screen by
adjusting the brightness of the individual
pixels.
Contrast
Menu → Picture → Contrast
Increases or decreases the contrast between
dark and light areas of the picture.
Brightness
Menu → Picture → Brightness
Adjusts the brightness of the screen. Not as
effective as Backlight / Cell Light.
Sharpness
Menu → Picture → Sharpness
Sharpens or dulls the edges of objects.
Color
Menu → Picture → Color
Adjusts the color saturation. The higher the
Color setting, the more intense the color.
Low settings remove color and the picture
becomes black, white and gray.
Tint (G/R)
Menu → Picture → Tint (G/R)
Adjusts the amount of green and red in
the picture. As you increase the amount of
green, the amount of red decreases and vice
versa.
To adjust picture quality, follow these steps:
1.Select an option you want to adjust.
When you select an option, a slider screen
appears.
2.Adjust the option value using your remote.
NN When you make change to option value,
the OSD will be adjusted accordingly.
NN When your TV is connected to a PC via the
HDMI to DVI cable, Color and Tint (G/R) is
not available.
NN You can adjust and store Settings for each
external device connected to the TV.
NN Lowering picture brightness reduces
power consumption.
Changing the Picture Size
Screen Adjustment
Menu → Picture → Screen Adjustment
Using this function, you can make change to
various picture size and aspect ratio options.
●● Picture Size
If you have a cable box or satellite receiver, it
may have its own set of screen sizes as well.
However, we highly recommend you use
your TV's 16:9 mode most of the time.
NN If you have set Double (à, Œ) mode in
PIP (Picture-in-Picture), you cannot adjust
the Picture Size.
16:9: Sets the picture to the 16:9 wide
screen format.
Zoom1: Provides moderate magnification of
the picture. Sides, top, and bottom are cut
off.
Zoom2: Provides larger magnification of the
picture. Sides, top, and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the
picture so it fits the entire screen.
NN Available with HD 1080i / 720p signals in
16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
NN Do not set your TV to 4:3 format for
a long time. The borders displayed on
the left and right, or top and bottom of
the screen may cause image retention
(screen burn) which is not covered by the
warranty.
Screen Fit: When your TV inputs HDMI (720p
/ 1080i / 1080p) or Component (1080i
/ 1080p) signals, displays the full image
without any cut-off.
Smart View 1: Reduces the 16:9 picture by
50%. for LED TV
Smart View 2: Reduces the 16:9 picture by
25%. for LED TV
NN Smart View 1 is enabled only in HDMI
mode.
NN Smart View 2 is enabled only in HDMI or
DTV mode.
NN The picture size can vary depending on the
input resolution when you play content
from Videos in AllShare Play.
●● Position
Adjusts the picture position. Position is only
available if Picture Size is set to Zoom1,
Zoom2, Wide Fit, or Screen Fit.
NN In DTV mode, Position is not available
when Picture Size is set to Screen Fit.
To use the Position function after selecting
Zoom1, Zoom2, Wide Fit or Screen Fit,
follow these steps:
1.Select the Position.
2.On the Position screen, select Position,
and then move the picture to position you
want using your remote.
3.When done, select Position again, and
then select Close.
NN To reset the picture position, select
Reset.
Picture Sizes available by Input Source:
–– ATV, AV: 16:9, Zoom1, Zoom2, 4:3
–– Component (480i, 480p): 16:9, Zoom1,
Zoom2, 4:3
–– DTV (720p): 16:9, Wide Fit, 4:3, Smart
View 2 for LED TV
–– DTV (1080i, 1080p): 16:9, Wide Fit, 4:3,
Screen Fit, Smart View 2 for LED TV
–– Component(720p): 16:9, Wide Fit, 4:3
–– Component(1080i, 1080p): 16:9, Wide Fit,
4:3, Screen Fit
–– HDMI (720p, 1080i, 1080p): 16:9, Wide
Fit, 4:3, Screen Fit, Smart View 1 for LED TV
, Smart View 2
for LED TV
NN Depending on the input source, the picture
size options may vary.
NN The available items may differ depending
on the selected mode.
NN HD (High Definition): 16:9 - 1080i/1080p
(1920x1080), 720p (1280x720)
NN You can adjust and store settings for each
external device you have connected to an
input on the TV.
Changing the Picture Options
Advanced Settings
Menu → Picture → Advanced Settings
Using this function, you can configure
advanced picture settings to create your
preferred picture.
NN Advanced Settings is available only when
the Picture Mode is set to Standard or
Movie mode.
NN When connecting a PC using the HDMI-
DVI cable, you can only make changes to
White Balance and Gamma.
●● Dynamic Contrast
Adjusts the screen contrast.
●● Black Tone
Darker settings make blacks look darker.
●● Flesh Tone
Adjusts the amount of red in skin tones.
●● RGB Only Mode
Displays the Red, Green and Blue colors so
you can make fine adjustments to hue and
saturation.
●● Color Space
Adjusts the range and variety of colors (the
color space) available to create images.
NN To adjust Color, Red, Green, Blue and
Reset, set the Color Space to Custom.
●● White Balance
Adjusts the color temperature of the picture
so that white objects look white (instead of,
for example, slightly pink or slightly yellow)
and the overall color of the picture looks
natural.
R-Offset / G-Offset / B-Offset: Adjusts each
color’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each
color’s (red, green, blue) brightness.
Reset: Resets the White Balance to it’s
default settings.
●● 10p White Balance
Controls the white balance in 10 point
intervals by adjusting the red, green, and
blue brightness.
NN Available when the Picture Mode is set to
Movie and when the external input is set
to all input.
NN Some external devices may not support
this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its
default settings.
●● Gamma
Adjusts the primary color intensity.
●● Expert Pattern
Use the Expert Pattern function to calibrate
the picture. If the OSD menu disappears or a
menu other than the Picture menu is opened,
the TV saves the calibration and the Expert
Pattern screen disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This test screen demonstrates the
effect of the display settings on shades of
grey and black.
Pattern2: This test screen demonstrates the
effect of the display settings on colors.
NN After selecting Pattern1 or Pattern2, you
can adjust any of the advanced settings
for desired effect.
NN While the Expert Pattern is running, the
TV does not output sound.
NN Only enabled in DTV, Component, and
HDMI modes.
●● xvYCC
Setting xvYCC on increases picture detail
and enlarges the color space when you are
watching movies input from an external
device (e.g. BD/DVD player) connected to
the TV’s HDMI or Component IN jacks.
NN Available only when you set the Picture
Mode to Movie and the external input to
HDMI or Component.
NN Some external devices may not support
this function.
●● Motion Lighting
When on, the TV automatically adjusts the
brightness of the screen in response to the
brightness of the room. In bright light, the
screen brightens. In dim light, the screen
dims.
NN Only available in Standard mode.
NN This feature is not supported in 3D mode.
NN When you change the Backlight for LED TV
/ Cell Light for PDP TV , Contrast or
Brightness, the TV sets the Motion
Lighting to Off.
●● Black Enhancer for LED TV
Enhance picture depth by adjusting black
color depth.
NN Available only when Picture Mode is set to
Movie.
Picture Options
Menu → Picture → Picture Options
Using this function, you can configure
additional picture settings to suit your
preference.
NN When your TV is connected to a PC via
the HDMI to DVI cable, you can only make
changes to Color Tone.
●● Color Tone
Cool makes the picture bluer (cooler).
Warm1 and Warm2 make the picture redder
(warmer).
NN Warm1 and Warm2 are deactivated when
the Picture Mode is set to Dynamic.
NN You can adjust and store settings for each
external device connected to an input on
the TV.
●● Digital Noise Filter
If the broadcast signal received by your TV
is weak, you can activate the Digital Noise
Filter feature to reduce any static and
ghosting that may appear on the screen.
Auto Visualization: When changing analog
channels, displays signal strength.
NN When the signal is weak, try all the options
until the TV displays the best picture.
NN Only available for analog channels.
NN When the bar is green, you are receiving
the best possible signal.
●● MPEG Noise Filter
Reduces MPEG noise to provide improved
picture quality.
●● HDMI Black Level
Lets you adjust the screen depth by selecting
a black level.
NN Available only in HDMI mode.
●● Film Mode
Sets the TV so that it senses and then
processes film signals from all sources
automatically and adjusts the picture for
optimum quality.
NN Available in TV, AV, Component (480i /
1080i) and HDMI (1080i).
●● Auto Motion Plus for LED TV
Removes blur and judder from scenes with
larger amounts of rapid movement to
provide a clearer picture.
Blur Reduction: Adjusts the blur reduction
level for signals input from all video sources.
Judder Reduction: Adjusts the Judder
reduction level for signals input from a video
source through which you are playing a
movie.
Reset: Reset the custom settings.
NN The info screen on your TV displays the
resolution and frequency of the incoming
video signal (60 Hz). This displayed
frequency is not the frequency of the
picture the TV is displaying when you
have Auto Motion Plus on.
NN If noise occurs on the screen, please
set the Auto Motion Plus to Off. If the
Auto Motion Plus is set to Custom, you
can control Blur Reduction and Judder
Reduction manually and use Reset to
reset both to their default settings.
NN If the Auto Motion Plus is set to Demo,
you can compare the difference between
a picture with Auto Motion Plus On and
Auto Motion Plus Off modes.
●● LED Motion Plus for LED TV
Removes blur and judder from scenes with
large amounts of rapid movement to provide
a clearer picture.
NN Available only when Picture Mode is set to
Dynamic, Standard, or Movie.
Reset Picture
Menu → Picture → Reset Picture
Resets your current picture mode to its
default settings.
Using the TV with Your PC
Using Your TV as a Computer (PC) Display
Entering the Video Settings (Based on
Windows 7)
For your TV to work properly as a computer
display, you must enter the correct video
settings.
NN Depending on your version of Windows
and your video card, the procedure on
your PC will probably differ slightly from
the procedure presented here.
NN However, the same basic information will
apply in most cases. (If not, contact your
computer manufacturer or Samsung
Dealer.)
1.Click “Control Panel” on the Windows
start menu.
2.Click “Appearance and Themes” in the
“Control Panel” window. A display dialog
box appears.
3.Click “Display”. Another display dialog box
appears.
4.Click the “Settings” tab on the display
dialog box.
–– On the Settings tab, set the correct
resolution (screen size). The optimal
resolution for this TV is 1920 x 1080.
–– If a vertical-frequency option exists on
your display settings dialog box, select
“60” or “60 Hz”. Otherwise, just click
“OK” and exit the dialog box.
Changing the Preset Sound Mode
Sound Mode
Menu → Sound → Sound Mode
Sound modes apply preset adjustments to
the sound.
NN If Speaker Select is set to External
Speaker, the Sound Mode is disabled.
●● Standard
Selects the normal sound mode.
●● Music
Emphasizes music over voices.
●● Movie
Provides the best sound for movies.
●● Clear Voice
Emphasizes voices over other sounds.
●● Amplify
Increase the intensity of high-frequency
sound to allow a better listening experience
for the hearing impaired.
Adjusting Sound Settings
Sound Effect
Menu → Sound → Sound Effect
NN If Speaker Select is set to External
Speaker, the Sound Effect is disabled.
NN Available only when the Sound Mode is
set to Standard.
●● Virtual Surround
This function provides a virtual 5.1 channel
surround sound experience through a pair of
speakers using HRTF (Head Related Transfer
Function) technology.
●● Dialog Clarity
This function allows you to increase the
intensity of a voice over background music
or sound effects so that dialog can be heard
more clearly.
●● Equalizer
The Equalizer displays a series of sliders.
Use the arrow buttons to select a slider,
and change the slider’s value. To Reset the
Equalizer, select the Reset. A pop-up appears
asking if you want to reset, select Yes. To
exit, select Close.
Balance L/R: Adjusts the balance between
the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz
(Bandwidth Adjustment): Adjusts the
loudness of specific bandwidth frequencies.
Reset: Resets the equalizer to its default
settings.
3D Audio
Menu → Sound → 3D Audio
3D audio technology provides the immersive
sound corresponding to the pop-up effect
of 3D video by audio depth control in
perspective.
NN Available only when watching 3D image.
Broadcast Audio Options
Menu → Sound → Broadcast Audio Options
●● Preferred Language
(digital channels only)
Digital-TV broadcasts can simultaneously
transmit many audio tracks (for example,
simultaneous translations of the program
into foreign languages). You can only select
a language from among the ones being
broadcasted.
●● Multi-Track Sound
The broadcasts can transmit one or more
audio tracks. You can select a sound you
want to listen from among the ones being
broadcasted.
NN While watching TV, open the Tools
menu using your remote, you can select
the Multi-Track Sound in Tools menu
immediately.
NN Multi-Track Sound may differ depending
on the program being broadcast or
broadcast signal.
SPDIF Output
Menu → Sound → SPDIF Output
SPDIF (Sony Philips Digital Interface)
provides digital audio output to speakers
and various digital devices such as A/V
Receivers and Home Theaters which reduces
interference and distortion.
●● Audio Format
You can select the Digital Audio output
(SPDIF) format. The available Digital Audio
output (SPDIF) format may differ depending
on the input source.
●● Audio Delay
Lets you correct timing mismatches between
the audio track and the video when you are
watching the TV and listening to digital audio
output from the TV through an external
device such as an AV receiver. When you
select the Audio Delay, a slider screen
appears. Adjust the option value using your
remote (0ms ~ 250ms).
Speaker Settings
Menu → Sound → Speaker Settings
●● Speaker Select
If you are listening to the sound track of a
broadcast or movie through an external
receiver, you may hear a sound echo caused
by the difference in decoding speed between
the TV’s speakers and the speakers attached
to your audio receiver. If this occurs, set the
TV to External Speaker.
NN When the Speaker Select is set to External
Speaker, the TV’s speakers are turned off.
You will hear sound through the external
speakers only. When the Speaker Select is
set to TV Speaker, both the TV’s speakers
and the external speakers are on. You will
hear sound through both.
NN When the Speaker Select is set to External
Speaker, the volume buttons and mute
function will not operate and the sound
settings will be limited.
NN If there is no video signal, both the TV’s
speakers and the external speakers will be
mute.
●● Auto Volume
Because each station has its own
broadcasting conditions, the volume may
fluctuate each time you change the channel.
This feature automatically adjusts the
volume of a channel by lowering the sound
output when the modulation signal is high
or by raising the sound output when the
modulation signal is low.
NN To use the volume control of a connected
source device, set Auto Volume to Off.
A change to the volume control of the
connected source device may not be
applied if Auto Volume is set to Normal or
Night.
Reset Sound
Menu → Sound → Reset Sound
Reset all sound settings to the factory
defaults.
Connecting to the Network
Wired Network Connection
There are three ways to attach your TV to
your LAN using cable:
NN If you want to view a illustration, see your
user's manual. The network connection
illustrated in your user's manual.
–– You can attach your TV to your LAN by
connecting the LAN port on the back of
your TV to an external modem using a
LAN cable.
–– You can attach your TV to your LAN by
connecting the LAN port on the back
of your TV to an IP Sharer which is
connected to an external modem. Use
LAN cable for the connection.
–– Depending on how your network is
configured, you may be able to attach
your TV to your LAN by connecting the
LAN port on the back of your TV directly
to a network wall outlet using a LAN
cable. Note that the wall outlet is attached
to a modem or router elsewhere in your
house.
NN If your network requires a Dynamic IP
address, you should use an ADSL modem
or router that supports the Dynamic
Host Configuration Protocol (DHCP).
Modems and routers that support DHCP
automatically provide the IP address,
subnet mask, gateway, and DNS values
your TV needs to access the Internet so
you do not have to enter them manually.
Most home networks use a Dynamic IP
address.
NN Some networks require a Static IP
address. If your network requires a Static
IP address, you must enter the IP address,
subnet mask, gateway, and DNS values
manually when you set up the network
connection. To get the IP address, subnet
mask, gateway, and DNS values, contact
your Internet Service Provider (ISP). If you
have a Windows computer, you can also
get these values through your computer.
NN You can use ADSL modems that support
DHCP if your network requires a Static
IP address. ADSL modems that support
DHCP also let you use Static IP addresses.
Wireless Network Connection
NN If you want to view a illustration, see your
user's manual. The network connection
illustrated in your user's manual.
You can connect your TV to your LAN
through a standard wireless router or
modem.
This TV supports the IEEE 802.11a/b/g
and n communication protocols. Samsung
recommends using IEEE 802.11n. When you
play video over a network connection, the
video may not play smoothly.
NN To use a wireless network, your TV must
be connected to a wireless IP sharer
(either a router or a modem). If the
wireless IP sharer supports DHCP, your
TV can use a DHCP or static IP address to
connect to the wireless network.
NN Select a channel for the wireless IP sharer
that is not currently being used. If the
channel set for the wireless IP sharer is
currently being used by another device
nearby, this will result in interference and
communication failure.
NN Your TV supports only the following
wireless network security protocols:
–– Authentication Mode : WEP, WPAPSK,
WPA2PSK
–– Encryption Type : WEP, TKIP, AES
NN If you select the Pure High-throughput
(Greenfield) 802.11n mode and the
Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) on your AP or
wireless router, Samsung TVs will not
support a connection in compliance with
new Wi-Fi certification specifications.
NN If your wireless router supports WPS
(Wi-Fi Protected Setup), you can
connect to the network via PBC (Push
Button Configuration) or PIN (Personal
Identification Number). WPS will
automatically configure the SSID and
WPA key in either mode.
NN If your router, modem, or device is not
certified, it may not connect to the TV.
NN Connection Methods: You can set up
the wireless network connection in four
ways:
–– Auto Setup (Using the Auto Network
Search function)
–– Manual Setup
–– WPS(PBC)
–– Plug & Access
Setting up the Wired Network
Network Settings
Menu → Network → Network Settings
Set the wired or wireless network
connection to use various Internet services
such as Smart Hub, AllShare Play and
perform software upgrades.
Automatic Wired Network Setup
You can configure your TV's wired network
connection automatically when connecting
your TV to a network that supports DHCP.
NN When connecting LAN cable, the screen
pop-up appears directly to set wired
network.
To set up your TV’s wired network
connection automatically, follow these steps:
1.Go to the Network Settings screen.
(Network → Network Settings)
2.Select Start. The network test screen
appears and verifies the network
connection.
3.When the connection has been verified,
the You are connected to the Internet.
If you have any problems using online
services, please contact your Internet
Service Provider. message appears.
NN If the connection process fails, check the
LAN port connection.
NN If the automatic process cannot find the
network connection values or if you want
to set the connection manually, go to the
next section, "Manual Network Setup."
Manual Wired Network Setup
You can configure your TV's wired network
connection manually when connecting your
TV to a network that requires a Static IP
address.
Getting the Network Connection Values
To view the Network connection values on
most Windows computers, follow these
steps:
1.Right click the Network icon on the
bottom right of the screen.
2.In the pop-up menu that appears, click
Status.
3.On the dialog that appears, click the
Support tab.
4.On the Support Tab, click the Details
button. The Network connection values
are displayed.
To set up your TV's wired network
connection manually, follow these steps:
1.Go to the Network Settings screen.
(Network → Network Settings)
2.Select Start. The network connection
screen appears and the verification
process starts.
3.Select Stop. The verification process
stops. Select IP Settings on network
connection screen. The IP Settings screen
appears.
4.Select the IP Mode, and then set the IP
Mode to Manual.
5.Go to the IP Address entry field, and then
select the IP Address using remote.
6.Enter the first portion of the IP Address
(for example, 105) into the first entry field
using your remote. When done, go to the
next field.
7.Enter the next portion of the IP Address.
When done, go to the next field.
8.Repeat the entry process for each field in
the IP Address.
NN If you make a mistake when entering
a number, re-enter the number to
correct it.
9.When done, go to the Subnet Mask fields.
10.Repeat the same entry process for Subnet
Mask, Gateway, and DNS Server.
11.When done, select OK. The network
test screen appears and the verification
process starts. When the connection has
been verified, the You are connected to
the Internet. If you have any problems
using online services, please contact
your Internet Service Provider. message
appears.
Network Status
Menu → Network → Network Status
You can check the current network and
Internet status.
When the wired network connection failed...
●● No network cable found.
Check that your network cable is plugged in.
If it is connected, make sure that the router
is turned on; if it is on, try turning if off and
on again.
●● IP auto setting failed.
Try the following to set your IP address
automatically. Or set your IP address
manually by selecting IP Settings. - Ensure
DHCP server is enabled on router and
unplug and re-plug-in the router. - Contact
your Internet Service Provider for more
information.
●● Unable to connect to the network.
Try the following: check if your IP address
is set correctly in IP Settings. Contact
your Internet Service Provider for more
information.
●● Connected to your local network, but
cannot connect to the Internet.
Check the DNS settings in IP Settings, or
contact your Internet Service Provider to
access the Internet.
●● Network setup complete, but cannot
connect to the Internet.
Contact your Internet Service Provider to
access the Internet.
Setting up the Wireless Network
Network Settings
Menu → Network → Network Settings
Set the wired or wireless network
connection to use various Internet services
such as Smart Hub, AllShare Play and
perform software upgrades.
Automatic Wireless Network Setup
Most wireless networks have an optional
security system that requires devices that
access the network to transmit an encrypted
security code called an Access or Security
Key. The Security Key is based on a Pass
Phrase, typically a word or a series of letters
and numbers of a specified length you were
asked to enter when you set up wireless
security for your wireless network.
If you use this method of setting up the
network connection, and have a Security Key
for your wireless network, you will have to
enter the Pass Phrase during the automatic
or manual setup process.
To set up your TV’s wireless network
connection automatically, follow these steps:
1.Go to the Network Settings screen.
(Network → Network Settings)
2.Select Start. The network function
searches for available wireless networks.
When done, it displays a list of the
available networks.
3.In the list of networks, select a network
you want to connect, and then select
Next.
NN If the wireless router is set to Hidden
(Invisible), you have to select Add
Network and enter the correct
Network Name (SSID) and Security Key
to establish the connection.
4.If the Enter security key screen appears,
go to step 5. If you select a wireless router
that does not have wireless security, go
to step 7.
5.To set wireless security for the router,
enter the Security Key (Security key or
PIN).
NN You can enter the Security Key
(Security key or PIN) using a keyboard
screen. Enter the Security Key using
your remote.
NN You should be able to find the Pass
Phrase on one of the set up screens
you used to set up your router or
modem.
6.When done, select Next. The network
connection screen appears and the
verification process starts.
7. When the connection has been verified,
the You are connected to the Internet.
If you have any problems using online
services, please contact your Internet
Service Provider. message appears.
NN If the network does not accept the
Security Key (Security key or PIN), select
Retry or select IP Settings to enter the
settings manually.
NN If you want to set up the connection
manually, select IP Settings. Then, go
to the next section, “Manual Network
Setup”.
Manual Wireless Network Setup
You can configure your TV's wireless
network connection manually when
connecting your TV to a network that
requires a Static IP address or if the
automatic connection process has failed.
Getting the Network Connection Values
To view the Network connection values on
most Windows computers, follow these
steps:
1.Right click the Network icon on the
bottom right of the screen.
2.In the pop-up menu that appears, click
Status.
3.On the dialog that appears, click the
Support tab.
4.On the Support Tab, click the Details
button. The Network connection values
are displayed.
To set up your TV's wireless network
connection manually, follow these steps:
1.Go to the Network Settings screen.
(Network → Network Settings)
2.Select Start. The network function
searches for available wireless networks.
When done, it displays a list of the
available networks.
3.In the list of networks, select a network
you want to connect, and then select
Next.
NN If the wireless router is set to Hidden
(Invisible), you have to select Add
Network and enter the correct
Network Name (SSID) and Security Key
to establish the connection.
4.If the Enter security key screen appears,
go to step 5. If you select a wireless router
that does not have wireless security, go
to step 7.
5.To set wireless security for the router,
enter the Security Key (Security key or
PIN).
NN You can enter the Security Key
(Security key or PIN) using a keyboard
screen. Enter the Security Key using
your remote.
NN You should be able to find the Pass
Phrase on one of the set up screens
you used to set up your router or
modem.
6.When done, select Next. The network
connection screen appears and the
verification process starts.
7.Select Stop. The verification process
stops. Select IP Settings on the network
connection screen. The IP Settings screen
appears.
8Select IP Mode, and then set the IP Mode
to Manual.
9.Go to the IP Address entry field, and then
select the IP Address using remote.
10.Enter the first portion of the IP Address
(for example, 105) into the first entry field
using your remote. When done, go to the
next field.
11.Enter the next portion of the IP Address.
When done, go to the next field.
12.Repeat the entry process for each field in
the IP Address.
NN If you make a mistake when entering
a number, re-enter the number to
correct it.
13.When done, go to the Subnet Mask fields.
14.Repeat the same entry process for Subnet
Mask, Gateway, and DNS Server.
15.When done, select OK. The network
connection screen appears and the
verification process starts. When the
connection has been verified, the You are
connected to the Internet. If you have
any problems using online services, please
contact your Internet Service Provider.
message appears.
WPS(PBC) Network Setup
If your router has a WPS(PBC) button, you
can configure your TV's wireless network
connection using the WPS(PBC) button more
easily.
To set up your TV's wireless network
connection using WPS(PBC), follow these
steps:
1.Go to Network Settings screen. (Network
→ Network Settings)
2.Select Start. The network function
searches for available wireless networks.
When done, it displays a list of the
available networks.
3.Select the WPS(PBC).
4.Press the WPS(PBC) button on your
router within 2 minutes. Your TV
automatically acquires all the network
setting values it needs and connects to
your network.
5.The network connection screen appears,
and network setup is done.
Plug & Access Network Setup
The Plug & Access function lets you easily
connect your Samsung TV to your Samsung
wireless router (sold separately) by using
a USB memory stick to transfer the setup
information from the router to the TV. If
your non-Samsung wireless router does not
support Plug & Access, you must connect
using one of the other methods.
NN You can check for equipment that
supports Plug & Access on www.samsung.
com.
To set up your TV's wireless network
connection using Plug & Access, follow these
steps:
1.Turn on the Samsung wireless router and
your TV.
2.Insert a USB memory stick into the USB
port in your Samsung wireless router.
Check the router’s LED’s to make sure it
is on (Blinking → on).
3.Take the USB memory stick out of the
router, and then insert it into a USB port
on your Samsung TV. The memory stick
downloads the connection information.
4.Wait until the connection is automatically
established.
NN If Plug & Access does not connect your
TV to your wireless router, a popup
screen appears on the screen notifying
you of the failure. If you want to try
using Plug & Access again, disconnect
the USB memory stick, reset the AP,
and then try again from Step 1. You
can also choose one of the other
connection setup methods.
5.The network connection screen appears,
and the network setup is done.
6.Place the wireless router in a desired
location.
NN If the wireless router’s settings change
or you install a new wireless router,
you must perform the Plug & Access
procedure again, beginning from Step 1.
Network Status
Menu → Network → Network Status
You can check the current network and
Internet status.
When the wireless network connection failed...
●● Wireless network connection failed.
No wireless router selected. Go to Network
Settings to select your router.
●● Unable to connect to wireless router.
Try the following: check that the router is
turned on, and if it is try turning it off and on
again. Check if you need to enter a security
key to use the router.
●● IP auto setting failed.
Try the following to set your IP address
automatically. Or set your IP address
manually by selecting IP Settings. - Ensure
DHCP server is enabled on router and
unplug and re-plug-in the router. - Contact
your Internet Service Provider for more
information.
●● Unable to connect to the network.
Try the following: check if your IP address
is set correctly in IP Settings. Contact
your Internet Service Provider for more
information.
●● Connected to your local network, but
cannot connect to the Internet.
Check the DNS settings in IP Settings, or
contact your Internet Service Provider to
access the Internet.
●● Network setup complete, but cannot
connect to the Internet.
Contact your Internet Service Provider to
access the Internet.
Managing the Network Connected Devices
Wi-Fi Direct
Menu → Network → Wi-Fi Direct
Set to connect the TV to wireless mobile
devices. Using this function, you can connect
wireless mobile devices with your TV directly
without a router.
NN To use this function, your mobile device
should be supported by the Wi-Fi Direct.
To connect your mobile device with your TV
using Wi-Fi Direct, follow these steps:
1.Go to Wi-Fi Direct screen (Network →
Wi-Fi Direct). The TV starts to search
devices.
2.Turn on the Wi-Fi Direct function on your
device. Select the desired Wi-Fi device.
–– PBC: Press the WPS(PBC) button on
your Wi-Fi device within 2 minutes.
Your TV automatically acquires all the
network setting values it needs and
connects to your network.
–– PIN: Input the displayed PIN on your
device.
NN If you want to disconnect the device,
select the connected Wi-Fi device, and
then select Disconnect.
Soft AP
Menu → Network → Soft AP
Using this function, you can connect the TV
on your mobile devices if your mobile devices
do not support Wi-Fi Direct. Set the options
for connection of Wi-Fi device.
●● Soft AP
Turns on or off the Soft AP. When Soft AP is
set to On, your mobile devices can find the
TV name in Wi-Fi connection list.
●● Security key
Set the Security key manually using the
remote control.
–– If the security key does not meet the
required digit number, Done is not
available.
–– Input the generated security key into the
device you want to connect.
–– If network does not operate normally,
check the security key again. An incorrect
security key may cause a malfunction.
AllShare Settings
Menu → Network → AllShare Settings
Selects whether to use media functions on
the network. For details on set up options,
refer to the “AllShare Settings” in the
AllShare Play section.
Device Name
Menu → Network → Device Name
Enter a name for this TV. This name will be
shown on network remote controls and
devices using AllShare Play.
NN A keyboard appears on the screen
and you can key in a name for your TV
manually using your remote control. For
example, if you want to change the name
to Samsung TV, select each character
using your remote. When done, select
Done.
Setting the Time
Time
Menu → System → Time
NN The time you set will appear when you press
the INFO button for Standard Remote Control or
select Info for Smart Touch Control
●● Clock
Set the clock to use the various timer
features of the TV.
NN If you disconnect the power cord, you
have to set the clock again.
To set the clock, follow these steps:
1.Go to Clock screen (System → Time →
Clock).
2.Select Auto or Manual.
ŒŒ If you selected Auto:
The TV will automatically download the
correct time from a digital channel.
–– Select Time Zone, and then select your
Time Zone.
–– Select DST (Daylight Savings Time).
Select On if you want to turn the DST
adjustment on and off manually. Select
Off to turn off the DST adjustment.
NN DST and Time Zone function are only
available when the Clock Mode is set
to Auto.
ŒŒ If you selected Manual:
–– The Clock Set screen appears. Set the
Date and Time manually. You can set
the current date and time using your
remote.
NN Available only when Clock Mode is set
to Manual.
●● Sleep Timer
Automatically shuts off the TV after a preset
period of time. (30, 60, 90, 120, 150 and 180
minutes).
NN Select a period of time using your remote.
To cancel the Sleep Timer, select Off.
●● On Timer
Set On Timer so that your TV turns on
automatically at a time and on a day of your
choosing. You can set up three separate On
Timer configurations. (On Timer 1, On Timer
2, On Timer 3)
NN You must set the clock before you can use
the On Timer.
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can select the days you want to
activate the timer.
NN The c mark indicates days you’ve
selected.
Time: Set the time that the TV turns on
automatically.
Volume: Set the desired loudness.
Source: To select what will be turned on
when the timer setting is activated. You
can set the TV to turn on a specific channel
or play back contents such as video, photo
or audio files located in an external device
connected to the TV.
NN The USB device must be connected to
your TV before you can select USB.
Antenna (when the Source is set to TV):
Select Air or Cable.
Channel (when the Source is set to TV):
Select the desired channel.
Music / Photo (when the Source is set to
USB): Select a folder in the USB device
containing music or photo files you want
played when the TV turns on automatically.
NN If there is no music file on the USB device
or you don’t select a folder containing a
music file, the Timer function does not
operate correctly.
NN If there is only one photo file in the USB,
the slide show will not play.
NN If a folder name is too long, the folder
cannot be selected.
NN Each USB you use is assigned its own
folder. When using more than one of the
same type of USB, make sure the folders
assigned to each USB have different
names.
NN We recommend that you use a USB
memory stick and a multi card reader
when using the On Timer. The On Timer
function may not work with USB devices
with a built-in battery, MP3 players, or
PMPs made by some manufacturers
because the TV can take too long to
recognize these devices.
NN If you set the On Timer to play a file
saved on a USB HDD, it may take up to 40
seconds or more to play the file after the
TV is turned on.
●● Off Timer
Set Off Timer so that your TV turns off
automatically at a time and on a day of your
choosing. You can set up three separate Off
Timer configurations. (Off Timer 1, Off Timer
2, Off Timer 3)
NN You must set the clock before you can use
the Off Timer.
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want
Off Timer to turn off your TV.
NN The c mark indicates days you’ve
selected.
Time: Set the time that the TV turns off
automatically.
Blocking Programs
Security
Menu → System → Security
Using this function, you can configure
channel related security options. Every time
you access the Security functions, the PIN
screen will appear and you must enter that
PIN. The PIN screen closes and the Security
menu appears.
●● Program Rating Lock
The Program Rating Lock feature lets you
block programs you've determined are
inappropriate for your children based on
their ratings. To access the Program Rating
Lock feature and make any changes, you
must enter a PIN (personal identification
number). To watch a blocked program, you
must also enter the same PIN.
NN The Program Rating Lock is not available
in HDMI, Component mode.
NN The default PIN number for a new TV set
is “0-0-0-0”.
TV Rating: You can block TV programs based
on their ratings. This function allows you to
control what your children can watch.
The TV Rating displays a grid with locks. The
following categories are on the left side:
–– TV-Y: Young children
–– TV-Y7: Children 7 and over
–– TV-G: General audience
–– TV-PG: Parental guidance
–– TV-14: Viewers 14 and over
–– TV-MA: Mature audience
The following categories are on top:
–– ALL: Lock all TV ratings.
–– FV: Fantasy violence
–– V: Violence
–– S: Sexual situation
–– L: Adult Language
–– D: Sexually Suggestive Dialog
NN To block certain content, select an entry
field to lock (That is, you “click it”.). For
example, click the lock at the intersection
of V and TV-MA, and you block all
programs that are rated violent and for
mature adults.
NN To unblock a category, click the lock icon.
To unblock all the categories in a row,
click the lock under ALL.
NN To watch a blocked program, you must
enter the PIN code when requested.
Movie Rating (MPAA): You can block movies
based on their MPAA rating. The Motion
Picture Association of America (MPAA) has
implemented a rating system that provides
parents or guardians with advanced
information on which films are appropriate
for children.
Movie Rating (MPAA) displays a column with
locks and the following ratings categories:
–– G: General audience (no restrictions).
–– PG: Parental guidance suggested.
–– PG-13: Parents strongly cautioned.
–– R: Restricted. Children under 17 should be
accompanied by an adult.
–– NC-17: No children under age 17.
–– X: Adults only.
–– NR: Not rated.
NN To block certain content, select an entry
field to lock (That is, you “click it”.). For
example, click the X lock and you block all
X-rated movies.
NN The rating categories are also grouped so
that clicking one category blocks all the
categories a parent would block along
with it. For example, if you block the PG13 category, then R, NC-17 and X will
automatically be blocked also.
NN To unblock a category, click the lock icon.
Canadian English Rating: You can block
TV programs based on their Anglophone
Canadian ratings.
Canadian English Rating displays a column
with locks and the following ratings
categories:
–– C: Programming intended for children
under age 8.
–– C8+: Programming generally considered
acceptable for children 8 years and over
to watch on their own.
–– G: General programming, suitable for all
audiences.
–– PG: Parental Guidance.
–– 14+: Programming contains themes or
content which may not be suitable for
viewers under the age of 14.
–– 18+: Adult programming.
NN To block certain content, select an entry
field to lock (That is, you “click it”.). For
example, click the 18+ lock and you block
all TV programs rated 18+.
NN The rating categories are also grouped
so that clicking one category blocks all
the categories a parent would block
along with it. For example, if you block
the G category, then PG, 14+ and 18+ will
automatically be blocked.
NN To unblock a category, click the lock icon.
Canadian French Rating: You can block TV
programs based on their French Canadian
ratings.
Canadian French Rating displays a column
with locks and the following ratings
categories:
–– G: General
–– 8 ans+: Programming generally
considered acceptable for children 8
years and over to watch on their own.
–– 13 ans+: Programming may not be
suitable for children under the age of 13.
–– 16 ans+: Programming is not suitable for
children under the age of 16.
–– 18 ans+: Programming restricted to
adults.
NN To block certain content, select an entry
field to lock (That is, you “click it”.). For
example, click the 18 ans+ lock and you
block all TV programs rated 18 ans+.
NN The rating categories are also grouped so
that clicking one category blocks all the
categories a parent would block along
with it. For example, if you block the 8
ans+ category, then 13 ans+, 16 ans+ and
18 ans+ will automatically be blocked also.
NN To unblock a category, click the lock icon.
Downloadable U.S. Rating: Parental
restriction information you can use while
watching DTV channels.
NN If information is not downloaded from the
broadcasting station, the Downloadable
U.S. Rating menu is deactivated.
NN Parental restriction information is
automatically downloaded while you
watch DTV channels. It may take several
seconds.
NN The Downloadable U.S. Rating menu
is available for use after information
is downloaded from the broadcasting
station. However, depending on the
information from the broadcasting
station, it may not be available for use.
NN Parental restriction levels differ
depending on the broadcasting
station. The default menu name
and the Downloadable U.S. Rating
change depending on the downloaded
information.
NN Even if you set the on-screen display to
another language, the Downloadable U.S.
Rating menu will appear in English only.
NN Blocking one rating level will automatically
block other categories that deal with
more sensitive material.
NN The rating titles (For example: Humor
Level..etc) and TV ratings (For example:
DH, MH, H..etc) may differ depending on
the broadcasting station.
●● Change PIN
The Change PIN screen will appear. Choose
any 4 digits for your PIN and enter them in
Enter New PIN fields. Re-enter the same 4
digits in Confirm New PIN fields. When the
Confirm screen disappears, select Close. The
TV has memorized your new PIN.
How to watch a restricted program or movie
If the TV is tuned to a restricted program or
movie, the Program Rating Lock will block it.
The screen will go blank and a pop-up
message appears. Enter the PIN to unblock
the program or movie using your remote.
NN The Smart Touch Control is not available. If you
forget the PIN code, press the remote
control buttons in the following sequence
in Standby mode, which resets the PIN to
“0-0-0-0”: MUTEM → 8 → 2 → 4 → P
(power on).
Economical Solutions
Eco Solution
Menu → System → Eco Solution
●● Energy Saving
Lets you adjusts the brightness of the TV in
order to reduce power consumption. If you
select Picture Off, the screen is turned off,
but the sound remains on. Press any button
except the volume button to turn on the
screen.
●● Eco Sensor
To enhance power savings, the picture
settings will automatically adapt to the light
in the room.
NN If you adjust Backlight for LED TV / Cell
Light for PDP TV in the Picture menu, the
Eco Sensor will be set to Off automatically.
Min. Backlight for LED TV / Min Cell Light
for PDP TV : When the Eco Sensor is set to On,
you can manually adjust the minimum screen
brightness.
NN If the Eco Sensor is set to On, the display
brightness may change (become slightly
darker or brighter) depending on the light
intensity in your room. You can control
the screen’s minimum brightness with the
Min. Backlight / Min Cell Light function.
●● No Signal Power Off
To avoid unnecessary energy consumption,
you can set how long you want the TV to
remain on if it’s not receiving a signal.
NN Disabled when an attached PC is in power
saving mode.
●● Auto Power Off
The TV will automatically turned off when
no user operation is detected for 4 hours.
Picture In Picture (PIP)
PIP
Menu → System → PIP
You can watch a program whose signal
has passed through the TV’s tuner and
video from one external video source
simultaneously.
For example, if you have a cable box
connected to the Cable In jack, you can use
PIP to watch programs from the cable box
and a movie from a Blu-ray player attached
to the HDMI In jack.
NN While Smart Hub or Program Rating Lock
is on, you cannot use the PIP.
●● PIP
Activate or deactivate the PIP function.
●● Air/Cable
Select either Air or Cable as the input source
for the sub-picture screen.
●● Channel
Select the channel for the sub-picture
screen.
●● Size
Select a size for the sub-picture screen.
●● Position
Select a position for the sub-picture screen.
NN In Double (à, Œ) mode, you cannot
select Position.
●● Sound Select
You can choose to listen to the sound from
the main picture or the sub picture.
NN If you turn the TV off while watching in
the PIP mode, the PIP function is reset
to Off. When you turn your TV on, you
must turn PIP on again to watch in the PIP
mode.
NN You may notice that the picture in the PIP
screen becomes slightly unnatural when
you use the main screen to view a game
or karaoke.
NN The PIP is not supported in 3D function.
NN PIP Settings: The picture from the
external video source will be in the main
screen and the picture from the TV’s
tuner will be in the PIP sub-picture screen.
–– Main picture: Component, HDMI
–– Sub picture: TV
Using the TV with a Keyboard and a Mouse
Device Manager
Menu → System → Device Manager
Using this function, you can set up input
devices to use with the TV. You can check
your device list and adjust the settings in this
menu.
NN Depending on the model of the USB
HID keyboard and mouse may not be
compatible with your TV.
●● Keyboard Settings
Lets you use a USB or Bluetooth keyboard
with your TV. If you want to use a USB
keyboard, connect it on the USB port. If you
want to use a Bluetooth keyboard, connect
it using the Bluetooth function.
NN Available only when the QWERTY keypad
screen appears in the Web Browser.
Select Keyboard
Select which keyboard to use from your
keyboard list. you can only use one keyboard,
even if several are connected.
Add Bluetooth Keyboard
You can add the Bluetooth keyboard.
Keyboard Options
Sets the default options for the keyboard
language and type.
–– Keyboard Language: Set a language for
your keyboard.
–– Keyboard Type: Set what a type a
keyboard you're using to enter text.
–– Switch Input Language: Select a key
sequence to change switching input
language.
●● Mouse Settings
Lets you use a USB or Bluetooth mouse with
your TV. If you want to use a USB mouse,
connect it on the USB port. If you want to
use a Bluetooth mouse, connect it using the
Bluetooth function.
Using your TV to use a mouse, you can use
the TV's menu in the same way as on a PC.
Select Mouse
Select which mouse to use from your mouse
list. you can only use one mouse, even if
several are connected.
Add Bluetooth Mouse
You can add the Bluetooth mouse.
Mouse Options
Sets the default options for the mouse
buttons.
–– Primary Button: Select the main button
you want to use click and select on screen.
–– Pointer Size: Set the size of the on-screen
mouse pointer.
–– Pointer Speed: Select the speed of the
mouse pointer.
Using the TV's menu with a mouse
1.Connect a USB or Bluetooth mouse on
your TV.
2.Click a primary button you selected. The
Go To screen appears.
3.Click a menu you wish, and then you can
use the menu to same way as on a PC.
Other Features
Menu Language
Menu → System → Menu Language
Set the menu language.
1.Select the Menu Language.
2.Choose a language you want to use.
Caption
(On-Screen Text Dialogue)
Menu → System → Caption
●● Caption
You can switch the caption function on or
off. If captions are not available, they will not
be displayed on the screen.
NN The Caption feature does not work with
devices connected to the TV through the
Component, HDMI jacks.
●● Caption Mode
You can select the desired caption mode.
NN The availability of captions depends on
the program being broadcast.
Default / CC1 – CC4 / Text1 – Text4: (analog
channels only) The analog caption function
operates in either analog TV channel
mode or when a signal is supplied from an
external device to the TV. (Depending on
the broadcasting signal, the analog caption
function may or may not work with digital
channels.)
Default / Service1 – Service6 / CC1 – CC4
/ Text1 – Text4: (Digital channels only) The
digital caption function works with digital
channels.
NN Service1 – Service6 may not be available
in digital caption mode depending on the
broadcast.
●● Digital Caption Options
(Digital channels only)
Adjusts the each option.
Size: Options include Default, Small, Standard
and Large. The default is Standard.
Font Style: Options include Default and
Style0 to Style7. The default is Style0.
Foreground Color: You can change the color
of the letters.
Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. The
default is White.
Background Color: You can change the
background color of the captions. Options
include Default, White, Black, Red, Green,
Blue, Yellow, Magenta and Cyan. The default
is Black.
Foreground Opacity: This adjusts the opacity
of text. Options include Default, Transparent,
Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity
of the caption background. Options include
Default, Transparent, Translucent, Solid and
Flashing.
Return to Default: This option sets each Size,
Font Style, Foreground Color, Background
Color, Foreground Opacity and Background
Opacity to their default.
NN Digital Caption Options are available only
when you can select Default and Service1
– Service6 in Caption mode.
NN The availability of captions depends on
the program being broadcast.
NN The Default setting follows the standards
set by the broadcaster.
NN You cannot set both the Foreground
Color and the Background Color to the
same color.
NN You cannot set both the Foreground
Opacity and the Background Opacity to
the same color.
Screen Burn Protection
for PDP TV
To reduce the possibility of screen burn, this
unit is equipped with Pixel Shift screen burn
prevention technology. Pixel Shift moves the
picture slightly on the screen.
The Pixel Shift Time setting allows you to
program the time between movements of
the picture in minutes.
Your TV also has the following additional
screen burn protection functions:
–– Pixel Shift
–– Auto Protection Time
–– Scrolling
–– Side Gray
●● Pixel Shift
Using this function, you can set the TV to
move pixels minutely on the PDP screen in a
horizontal or vertical direction to minimize
after images on the screen.
Available Pixel Shift settings and optimum
settings:
Horizontal
–– Available Settings: 0 – 4 (pixels)
–– Optimum settings for TV/AV/
Component/HDMI: 4
Vertical
–– Available Settings: 0 – 4 (pixels)
–– Optimum settings for TV/AV/
Component/HDMI: 4
Time (minute)
–– Available Settings: 1 – 4 min
–– Optimum settings for TV/AV/
Component/HDMI: 4 min
NN The Pixel Shift value may differ depending
on the monitor size (inches) and mode.
NN This function is not available in the Screen
Fit mode.
●● Auto Protection Time
If the screen displays a still image for a
certain period of time you define, the TV
activates the screen saver to prevent the
formation of burnt in ghost images on the
screen.
●● Scrolling
This function removes after-images on the
screen by illuminating all the pixels on the
PDP according to a pattern. Use this function
when there are after images or symbols on
the screen, especially when you displayed a
still image on the screen for a long time.
NN The after-image removal function
has to be executed for a long time
(approximately 1 hour) to effectively
remove after-images on the screen. If
the after-image is not removed after you
apply the function, repeat the function
again.
NN Press any button to cancel this feature.
●● Side Gray
Lets you select the color of the sidebars your
TV displays when you set the screen size to
4:3.
Auto Protection Time
for LED TV
If the screen displays a still image for a
certain period of time you define, the TV
activates the screen saver to prevent the
formation of burnt in ghost images on the
screen.
General
Menu → System → General
●● Game Mode
When you have connected a game console
such as a PlayStation™ or Xbox™ to the
TV, you can enjoy a more realistic gaming
experience by turning on the Game Mode
function.
Precautions and limitations for Game Mode
–– Before you disconnect the game console
and connecting another external device,
set Game Mode to Off.
–– If you display the TV menu in Game Mode,
the screen shakes slightly.
NN Game Mode is not available when the
input source is set to TV.
NN Set Game Mode to On only after
connecting a game console. If you turn
Game Mode on before you have attached
the game console, you may notice slightly
reduced picture quality.
NN If the Game Mode is set to On, the Picture
Mode is set to Standard and the Sound
Mode is set to Movie automatically.
●● BD Wise
Provides the optimal picture quality for
Samsung DVD, Blu-ray and Home Theater
products which support BD Wise. When
the BD Wise is set to On, the picture mode
is automatically changed to the optimal
resolution.
NN Available when you connect Samsung
products that support BD Wise through
an HDMI cable to the TV.
●● Menu Transparency
Adjust transparency of menu box.
●● Sound Feedback
Your TV gives sound feedback when you use
TV. Sound Feedback is enabled by default.
Turn off Sound Feedback or adjust its
volume.
●● Panel Lock
Lock or unlock all the keys on the front panel
at once. When Panel Lock is on, none of the
keys on the front panel operate.
●● Boot Logo
Displays the Samsung logo when the TV is
turned on.
●● Light Effect for LED TV
You can turn the LED on the TV’s front panel
on or off. Turn it off to save power or if the
LED is too bright for you.
NN Set the Light Effect to Off to reduce the
power consumption.
NN The color of light may vary depending on
the model.
Anynet+ (HDMI-CEC)
Menu → System → Anynet+ (HDMI-CEC)
Allows you to control all connected Samsung
devices that support anynet+ with your
Samsung TV’s remote. For details on set up
options, refer to the “Anynet+ (HDMI-CEC)”
instructions.
DivX® Video On Demand
Menu → System → DivX® Video On Demand
Shows the registration code authorized for
the TV. If you connect to the DivX web site
and register with 10-digit registration code,
you can download the VOD activation file.
Once you play it using AllShare Play, the
registration is completed.
NN For more information on DivX(R) VOD,
visit http://vod.divx.com.
Support Menu
e-Manual
Menu → Support → e-Manual
The e-Manual is built into your TV. Open
the e-Manual to learn how to use your TV’s
many features.
NN For the detailed information about the
e-Manual Screen, refer to “How to view
the e-Manual” in the User's Manual.
Self Diagnosis
Menu → Support → Self Diagnosis
●● Picture Test
Use to check for picture problems. Picture
Test displays a high definition picture that
you can examine for flaws or faults.
Yes: Select Yes if the test picture does not
appear or there is noise or distortion in the
test picture. There may be a problem with
the TV. Contact Samsung’s Call Center for
assistance.
No: Select No if the test picture displays
properly. There may be a problem with
your external equipment. Please check your
connections. If the problem persists, refer to
the external device’s user manual.
●● Sound Test
Use the built-in melody to check for sound
problems.
NN If you hear no sound from the TV’s
speakers, before performing the sound
test, make sure Speaker Select is set to TV
Speaker in the Sound menu, and then try
the speakers again.
NN You will hear the melody during the test
even if you have set Speaker Select to
External Speaker or have muted the
sound.
Yes: Select Yes if you can hear sound from
only one speaker or from neither speaker
during the sound test. There may be a
problem with the TV. Contact Samsung’s Call
Center for assistance.
No: Select No if you can hear sound from
the speakers. There may be a problem with
your external equipment. Please check your
connections. If the problem persists, refer to
the external device’s user manual.
●● Signal Information
(digital channels only)
The reception quality of over-the-air HD
channels is either perfect or the channels
are unavailable. Signal Information displays
HD channel signal strength so you can adjust
your antenna to increase signal strength and
receive HD channels.
●● Reset
Reset all setting to factory defaults except
for your network settings.
To reset your TV to default setting, follow
these steps:
1.Go to the Reset menu. (Support → Self
Diagnosis → Reset)
2.The PIN input screen appears. Enter the
PIN using your remote.
3.When done, the PIN screen disappear
automatically. The message All the
settings will return to factory defaults.
appears.
4.Select Yes. All settings have been
reset. The TV will turn off and on again
automatically. The Setup screen appears.
For more information about Setup, see
user manual.
●● Troubleshooting
If your TV seems to be having a problem,
access the troubleshooting guide for a
solution.
Software Update
Menu → Support → Software Update
The Software Update menu lets you upgrade
your TV’s software to the latest version.
Current Version: This is the software version
already installed in the TV.
Upgrading to the Latest Version
You can upgrade in four ways:
–– By USB
–– Online
–– Alternative Software
–– Standby Mode Upgrade
The four methods are explained in the
following pages.
NN Be careful not to turn off the power until
the upgrade is complete. The TV will turn
off and on automatically after completing
the software upgrade. When you upgrade
software, all video and audio settings you
have made will return to their default
settings. We advise you to write down
your settings so that you can easily reset
them after the upgrade.
●● By USB
To upgrade the By USB, follow these steps:
1.Visit www.samsung.com.
2.Download the latest USB software
upgrade exe archive to your computer.
3.Extracts the exe archive to your
computer. You should have a single folder
with the same name as the exe file.
4.Copy the folder to a USB flash drive.
5.Turn on the TV, and then insert the USB
flash drive into the USB port of the TV.
6.In the TV’s menu, go to Support →
Software Update.
7.Select By USB.
NN Please be careful not to remove the USB
drive until the upgrade is complete.
●● Online
The Online function lets you download the
upgrade software directly from the Internet
into your TV and then upgrade the software
in one operation. To use Online, you must
have configured your TV to connect to your
network and the TV must be connected to
the Internet. See the "Setting up the Wired
or Wireless Network" instructions.
To upgrade using the Online, follow these
steps:
1.Select the Online. The Connecting to
Server message appears.
2.If there is a download available, the
Download pop-up appears with a
progress bar and the download starts.
3.When the download is complete, the
Upgrade Query screen appears with three
choices: Upgrade Now, Upgrade Later, or
Don't Upgrade.
–– If you select the Upgrade Now, the TV
upgrades the software, turns off, and
then turns on automatically.
–– If you do not make a selection in one
minute or select the Upgrade Later, the
TV stores the new upgrade software.
You can upgrade the software later
using the Alternative Software
function.
–– If you select the Don't Upgrade, the TV
cancels the upgrade.
●● Alternative Software
The Alternative Software option lets you
upgrade using a file the TV downloaded
earlier, but you decided not to install
immediately, or a file downloaded by the
TV in Standby Mode (See Standby Mode
Upgrade on the next section).
To upgrade using Alternative Software,
follow these steps:
1.If upgrade software has been
downloaded, you will see the software
version number to the right of Alternative
Software.
2.Select Alternative Software.
3.The TV displays a message asking if you
want to upgrade. Select Yes. The TV
begins the upgrade.
4.When the upgrade is complete, the TV
turns off automatically, and then turns
on.
●● Standby Mode Upgrade
You can set the Standby Mode Upgrade
function so that the TV downloads new
upgrade software when it is in Standby
mode.
In Standby mode, the TV is off, but its
Internet connection is active. This allows
the TV to download upgrade software
automatically, when you are not using it.
Because the TV is turned on internally, the
screen may glow slightly. This phenomenon
may continue for more than 1 hour until the
software download is complete.
To set Standby Mode Upgrade, follow these
steps:
1.Select the Standby Mode Upgrade.
2.Select On or Off.
–– Off: If you select Off, the TV will notify
you with a pop up message when new
upgrade software is available.
–– On: If you select On, the TV will
automatically download new upgrade
software when it is in Standby mode
with the power off. If it downloads new
upgrade software, the TV will ask you
if you want to install it when you turn
the TV on.
NN To use the Standby Mode Upgrade
function, your TV must be connected to
the Internet.
Contact Samsung
Menu → Support → Contact Samsung
View this information when your TV does
not work properly or when you want
to upgrade the software. You can find
information regarding our call centers and
how to download products and software.
Remote Management
Menu → Support → Remote Management
The Call Center will access your Samsung
Product remotely to check internal
information. Remote Management can
control user settings and troubleshoot a
problem.
Smart Hub
Menu → Support → Smart Hub
Smart Hub lets you connect to the Internet
and enjoy variety of Internet and multimedia
contents. For more information on how to
use the Smart Hub, see “Smart Hub” in the
e-Manual.
Using the 3D function
3D
Menu → Picture → 3D
This exciting new feature enables you to
view 3D content. To fully enjoy this feature,
you must need a pair of Samsung 3D Active
Glasses to view 3D video.
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety information
before using the TV’s 3D function.
[[ Warning
ŒŒ Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea and headaches. If you experience
any such symptom, stop viewing 3D TV,
remove the 3D Active Glasses and rest.
ŒŒ Watching 3D images for an extended
period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV,
remove your 3D Active Glasses and rest.
ŒŒ A responsible adult should frequently
check on children who are using the 3D
function. If there are any reports of tired
eyes, headaches, dizziness, or nausea,
have the child stop viewing 3D TV and
rest.
ŒŒ Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
ŒŒ Do not use the 3D function or 3D Active
Glasses while walking or moving around.
If you use the 3D function or 3D Active
Glasses while walking or moving around
you can injure yourself by running into
objects, tripping, or falling.
●● 3D Mode
Select the 3D input format.
NN If you want to experience the 3D effect
fully, put the 3D Active Glasses on first,
and then select the 3D Mode from the list
below that provides the best 3D viewing
experience.
Off
: Turns the 3D function off.
: Changes a 2D image to 3D.
: Displays two images next to each other.
: Displays one image above another.
: Displays the images for the left and right
eye alternately in rows.
for LED TV
: Displays the images for the left and right
eye alternately in columns. for LED TV
: Displays the images for the left and right
eye alternately in pixels. for LED TV
: Displays the images for the left and right
eye alternately in frames. for LED TV
NN The 3D Mode may differ depending on
the input signal.
NN Some file formats may not support the
.
NN The
,
and
are available when
your PC is connected through an HDMI/
DVI cable.
NN The
displays the frequency (60Hz
only) when the TV’s resolution is 1920 x
1080.
●● 3D Effect for LED TV
Adjust 3D effects like perspective and depth
for your preferred 3D viewing experience.
3D Effect: Adjust the perspective and depth
settings. If you select Auto, adjust the
perspective and depth settings automatically
in accordance with the 3D input source.
If you select Manual, you can adjust the
perspective and depth you want.
3D Perspective: Adjust the overall 3D
perspective of the on-screen image.
Depth: Adjust the overall depth.
●● 3D Perspective for PDP TV
Adjust the overall 3D perspective of the onscreen image.
●● Depth for PDP TV
Adjust the overall depth.
●● L/R Change
Swap the left and right pictures.
●● 3D Auto View for LED TV
If you set the 3D Auto View to On, TV will
switches the TV to 3D automatically. If you
set the 3D Auto View to Message Notice,
a message screen appears when the TV
receives a 3D signal. Then you can view a 3D
image by selecting 3D using your remote.
NN When you access some application (such
as Smart Hub, etc.), TV will do not switch
to 3D. In this case, you should to use the
3D, after exiting the application.
●● 3D Optimize for LED TV
Automatically adjusts the picture overall to
provide an optimal 3D effect.
Support resolution (16:9 only)
HDMI
3D Format
/
Frame Packing
Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60 Hz
1920 x 1080i
59.94 / 60 Hz
1920 x 1080p
23.98 / 24 / 29.97 /
30 / 59.94 / 60 Hz
1280 x 720p
59.94 / 60 Hz
1920 x 1080i
59.94 / 60 Hz
1920 x 1080p
23.98 / 24 / 29.97 / 30 Hz
Component
Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60 Hz
1920 x 1080i
59.94 / 60 Hz
1920 x 1080p
23.98 / 24 / 29.97 / 30 / 59.94 / 60 Hz
Resolution
Frequency (Hz)
1280 x 720p
59.94 / 60 Hz
1920 x 1080i
59.94 / 60 Hz
DTV
Videos / Photos (In AllShare Play)
NN Refer to "Supported Subtitle and AllShare
Play file formats" in the Other Information
section.
Resolution supported for HDMI PC mode
for LED 7500 series and above
The optimal resolution for the HDMI PC
mode is 1920 x 1080.
If the input resolution is not 1920 x 1080,
the TV may not display images properly in
3D display or full screen mode.
How to watch the 3D images
Some 3D modes may not be available
depending on the format of the image
source.
To watch in 3D, you must wear 3D Active
Glasses and turn the glasses on by pressing
the power button.
1.Go to the 3D screen. (Picture → 3D)
2.Select the 3D Mode. The 3D Mode screen
appears.
3.Set the 3D Mode of the image you want
to view.
Read These Notes Before Using the 3D
Function...
ŒŒ The 3D Mode is set to Off automatically
when you access Smart Hub function.
ŒŒ The 3D Mode is set to its memorized
configuration value automatically when
you change the input source.
ŒŒ Some Picture functions are disabled in 3D
mode.
ŒŒ PIP is not supported in 3D mode.
ŒŒ 3D Active Glasses from Samsung’s
previous product (IR type) or other
manufacturers are not be supported.
ŒŒ When the TV is initially powered on, it
may take some time until the 3D display is
optimized.
ŒŒ The 3D Active Glasses may not work
properly if there is any other 3D product
or electronic devices turned on near the
glasses or TV. If there is a problem, keep
other electronic devices as far away as
possible from the 3D Active Glasses.
ŒŒ Be sure to stay within the viewing angle
and optimum TV viewing distance when
watching 3D pictures. Otherwise, you may
not be able to see 3D effects properly.
ŒŒ The ideal 3D viewing distance is three
times or more the height of the screen.
For example, if your screen is two feet
high, you should sit at least six feet from
the screen. We recommend sitting so that
your eyes are level with the screen.
Smart Hub
Menu → Support → Smart Hub
Using this function, you can stream movies,
videos, and music from the Internet,
access various for pay or free-of-charge
applications and view them on your TV.
Application content includes news, sports,
weather forecasts, stock market quotes,
maps, photos, and games.
NN You can also start this function by
pressing the ™ button on the remote
control.
Notice
ŒŒ Samsung Electronics takes no legal
responsibility for any interruption of the
Smart Hub service caused by the service
provider for any reason.
ŒŒ Application services may be provided in
English only and the contents available
may vary, depending on your area.
ŒŒ For more information about a Smart Hub
service, visit the web site of the applicable
service provider.
ŒŒ The Smart Hub service downloads and
processes data via the Internet so that
you can enjoy the Internet contents on
your TV screen. If the Internet connection
is unstable, the service may be delayed
or interrupted. Furthermore, the player
may turn off automatically in response to
conditions on the Internet. If this occurs,
check the Internet connection and try
again.
ŒŒ The services provided are subject to
change by the Smart Hub service provider
without notice.
ŒŒ The Smart Hub service contents may
differ depending on the player’s firmware
version.
ŒŒ For pay DivX contents with copy
protection can only be played through
a composite, a component or an HDMI
cable.
ŒŒ If the TV displays these icons at the
bottom left of the screen, you can use
corresponding functions:
: Voice Control (System → Voice and
Motion Control → Voice Control)
: Motion Control (System → Voice and
Motion Control → Motion Control)
: An USB or Bluetooth Mouse (the
device must connected to the TV).
(System → Device Manager → Mouse
Settings)
To start Smart Hub for the first time, follow
these steps:
1.Press the ™ button.
2.The Smart Hub screen appears. In a
few cases, the Country screen appears
immediately after.
3.If the Country screen has appeared, select
your country using your remote.
NN Some applications are available only in
certain countries.
4.The General Disclaimer screen appears.
Select Agree.
NN Screens can take a few seconds to
appear.
5.The Privacy Policy screen appears. Select
Agree.
6.The Service Update screen appears
and installs a number of services and
applications. When done, it closes. The
applications and services downloaded are
displayed on the Smart Hub screen. This
may take some time.
NN Smart Hub may close momentarily
during the installation process.
NN A number of screens may appear after
installation. You can close them or let
them close on their own.
7.To start an application, select an
application using your remote.
Using the Numeric Keypad
Selecting – using your remote while you
are using the Screen Keypad enables you
to change the text fields to lower case,
capitalized case, upper case, numbers and
icons.
You can use this Screen Keypad in a several
Smart Hub applications.
Method 1: Using the keypad of ABC type.
1.For example, suppose that you want to
input “105Chang”.
2.Select – 3 times using your remote to
change the input mode from lower case
to numbers.
3.Select 1, 0 and 5 in numerical order.
4.Select – 3 times using your remote to
change the input mode from numbers to
upper case.
5.Select 2 3 times using your remote to
input C.
6.Select – 3 times using your remote to
change the input mode from upper case
to lower case.
7.Input the rest of “Chang” using your
remote in the same way. When done,
select OK.
Method 2: Using the Keypad of XT9 type.
1.For example, suppose that you want to
input “105Chang”
2.Select – 3 times using your remote to
change the input mode from lower case
to numbers.
3.Select 1, 0 and 5 in numerical order.
4.Select – 3 times using your remote to
change the input mode from numbers to
capitalized case.
5.Select in sequence: 2, 4, 2, 6, 4. A window
will appear displaying a list of words
that can be entered using the selected
numbers. Select “Chang” from the list by
selecting } using your remote.
NN If “Chang” cannot be found in the list,
select + to create your own dictionary.
Add your own word to your dictionary.
Using the QWERTY Keypad
You can use this Screen Keypad in a several
Smart Hub applications in same way as a
keyboard.
Using the colored and function buttons with
the QWERTY Keypad
●● a Delete All
Delete all inputted character.
●● b Numeric / QWERTY
Toggles the keypad mode between
Numeric mode and QWERTY mode.
NN When the keypad is set to QWERTY
mode, you can input a character
using a USB or Bluetooth keyboard
connected on the TV.
●● T Settings
Displays the options menu.
Input Language: select a input language.
XT9 Text Input: Turns on or off the
recommended word function.
●● E Enter
Enter the selected character.
●● R Return
Return to the previous menu.
●● π Prev Page
Move to the previous keypad.
NN Available only when the keypad screen
is icon mode.
●● µ Next Page
Move to the next keypad.
NN Available only when the keypad screen
is icon mode.
Creating an Account
To establish your own, exclusive,
configuration of Smart Hub, create your
own Samsung account.
NN You must use an e-mail address as an ID.
NN You can register up to 10 User Accounts.
NN You do not need an account to use the
Smart Hub.
To create an account, follow these steps:
1.On the Smart Hub screen, select a using
your remote. The Login screen appears.
2.Select Create Account using your remote.
The Create Account screen appears.
3.Select Samsung Account. An entry screen
and keypad appear.
4.Use the keypad to enter your e-mail
address. This will serve as your ID.
5.When done, select OK. The Login screen
reappears.
6.Select Password. The Password screen
and a keypad appear.
7.Use the keypad to enter a password. The
password can be any combination of
letters, numbers, and symbols.
NN If you select a using your remote, the
TV show or hide the password as you
enter it.
8.When done, select OK.
9.Select Confirm password. The Password
screen and a keypad re-appear.
10.Repeat Steps 7 and 8.
11.When done, select Create Account. The
Confirmation window appears.
12.Select OK. The Continue to register
service ID window appears.
13.Select OK.
NN If you don’t have existing provider
accounts or do not want to register
existing accounts at this time, select
Cancel. You can also let the window
close on its own in about a minute.
14.The Register Service Account window
appears.
NN If you have existing accounts with
any of the listed providers, you can
associate the provider account and
the provider account password with
your Samsung account. Registration
makes it easier to access the providers
web site. For registration instructions,
go to Step 2 in Account Manager
under Settings in the “Configuring the
Smart Hub with Settings” section of
this manual.
Customizing the Home Screen
●● a Login / Logout
To log in to your Samsung account, follow
these steps:
1.With the Smart Hub main screen displayed
on your TV, select a using your remote.
The Login screen appears.
2.Select the ^ next to the Samsung
Account.
NN If you want to input the Samsung
Account. The keypad screen appears.
Then you can input your Samsung
Account manually.
NN When you select Face Recognition
Mode, you can log in to the Samsung
account using the Face recognition
function without input your account.
For more detailed information about
the Face recognition, refer to "SMART
Interaction" section in the e-Manual.
3.Select your ID from the list that appears.
The Login screen re-appears.
4.Select Password. The Password window
and a keypad appears.
5.Enter your password using your remote.
When done, select OK.
NN If you want Smart Hub to enter your
password automatically, select Remember
my password after you have entered
your password. A c mark appears. The
Smart Hub will now enter your password
automatically when you select or enter
your ID.
NN If you want to log in the Smart Hub
automatically when the Smart Hub
function starts, select Sign me in
automatically. A c mark appears.
NN When you forgot password, you can reset
your Samsung account password. Select
b using your remote. A pop-up message
appears, and the select OK. The guide to
resetting your password will be sent to
your e-mail.
●● b WallPaper
You can change a background image the
Smart Hub home screen.
●● { Account Manager
Lets you register your service provider
accounts, delete or deactivate your Samsung
account, and register or reset your face
recognition. For more information about
Account Manager, refer to "Configuring the
Smart Hub with Settings" in this section.
NN Available only when you logged in the
Smart Hub.
Using the Tools menu with Smart Hub
●● Login / Logout
Log in or log out to your Samsung account.
●● WallPaper
You can change a background image the
Smart Hub home screen.
●● Move
The Move function lets you change the
screen position of an application or a folder.
To use the Move function, follow these steps:
1.Select an application or a folder, and then
open the Tools menu using your remote.
2.Select Move. A position change screen
appears.
3.Move the icon using your remote. When
the icon is in the position of your choice,
select the icon. The application moves to
its new location.
●● Move to Folder
The Move to Folder function lets you move
an application to a folder.
To use the Move to Folder function, follow
these steps:
1.Select an application, and then open the
Tools menu using your remote.
2.Select the Move to Folder. The Move to
Folder window opens.
3.Select a folder using your remote. A
move finished message appears, and then
closes. The application has been moved to
the folder.
NN Also, if you select an application in a
folder, the application can be moved to
the Smart Hub screen.
To access an application in a Folder
1.On the Smart Hub screen, select a folder.
The folder opens.
2.Select an application you want to execute.
The application service starts.
●● Delete
The Delete function lets you delete
application from the Smart Hub.
To use the Delete function, follow these
steps:
1.Select an application, and then open the
Tools menu using your remote.
2.Select Delete. The message Do you want
to delete selected item(s)? appears.
3.Select OK. The application is deleted.
●● New Folder
The New Folder function lets you create and
name new folders. Once you have created a
folder, you can move applications into it.
To use the New Folder function, follow these
steps:
1.Open the Tools menu using your remote.
2.Select New Folder. The New Folder
window and a keypad screen appears.
3.Enter the name of the folder using your
remote.
4.When done, select OK. The New Folder
screen closes and the New Folder appears
on the Smart Hub screen.
●● Rename Folder
The Rename Folder function lets you rename
folders.
To use the Rename Folder function, follow
these steps:
1.Select a folder, and then open the Tools
menu using your remote.
2.Select Rename Folder. The Rename Folder
window and a keypad screen appears.
3.Enter a new name using your remote.
4.When done, select OK. The Rename
Folder window closes and the new name
appears below the folder.
●● Lock
The Lock function lets you lock some
application in Smart Hub so they cannot be
opened without entering the password.
NN Depending on the application, this
function may not be supported.
To use the Lock function, follow these steps:
1.Select an application, and then open the
Tools menu using your remote.
2.Select Lock. The Security window
appears.
3.Enter your password using your remote.
If you do not changed a password, enter
“0-0-0-0”.
4.A confirming message screen appears.
A lock symbol appears left to the
application.
●● Unlock
NN Depending on the application, this
function may not be supported.
To use the Unlock function, follow these
steps:
1.Select an application, and then open the
Tools menu using your remote.
2.Select Unlock. The Security window
appears.
3.Enter your password using your remote.
If you do not changed a password, enter
“0-0-0-0”.
4.A confirming message screen appears. A
lock symbol disappears.
●● Information
You can view the detailed information about
the selected application.
NN Depending on the application, you can
also lock or unlock the application in the
Detailed Information screen.
Configuring the Smart Hub with Settings
The Settings menu gives you access to
Account Manager, Service Manager, Reset,
and About Smart Hub functions.
To access the Settings menu, and then select
a menu item, follow these steps:
1.Open the Tools menu using your remote.
2.Select Settings. The Settings window
appears.
3.Select a menu item using your remote.
●● Account Manager
The Account Manager menu contains
functions that let you register your service
provider accounts, change your Smart Hub
password, and delete or deactivate your
Samsung account.
Link to other accounts: If you have existing
accounts with any of the providers listed
by the Link to other accounts function,
you can associate the provider account
and the provider account password with
your Samsung account. If you associate the
account, you will be able to log onto the
account through Smart Hub easily, without
entering your account name or password.
NN Before register your site account,
corresponding application should be
installed in the Smart Hub.
To use the Link to other accounts function,
follow these steps:
1.In the Account Manager menu, select the
Link to other accounts. The Link to other
accounts window appears.
2.Select an application you want to
associate with your Samsung account.
3.Enter your site ID and password using
your remote. When done, select OK.
NN This is the ID and password you
normally use to access your account
on this application.
4.If you have entered the ID and password
correctly, the Registered successfully.
message appears.
5.If want to add another service application,
and then repeat Steps 2 through 4 to
associate another service application.
6.When done, select OK.
Remove from TV Account List: Cancels all
your current registered Service Accounts
that you registered on the Register Service
Account screen.
Deactivate Account: Deactivates your
Samsung Account and deletes it and all your
account settings entirely from the Smart
Hub.
Face recognition: Register your face in your
Samsung account. For more information
about Face registration, refer to "Face
recognition" in the SMART Interaction
section.
Remove recognized face: Delete registered
your face in your Samsung account.
●● Service Manager
Auto Ticker: You can set Auto Ticker to
come on when powering on the TV.
NN The Ticker application provides useful
News, Weather, and Stock Market
information. The Ticker application on
Smart Hub must be downloaded to use
this feature.
NN Depending on your country, the Ticker
application may have a different service
or not be supported.
Push Notification Settings: When on, Push
Notification that displays a notification
message when an event takes place in an
application installed on Smart Hub. The TV
will display the notification message and
allow you to view details of the event even
while you are viewing TV.
●● Reset
The Reset function initializes all downloaded
applications, erases all user accounts and
settings from the TV, and resets all Smart
Hub settings to the factory default settings.
It then restarts Smart Hub as if it were
starting for the first time.
Your account, however, remains on the
Smart Hub server. To log into your account,
enter your ID and password on the Login
screen.
To use the Reset function, follow these steps:
1.In the Settings menu, select Reset. The
Reset screen appears.
2.Enter the your security password using
your remote.
NN The default password set is “0-0-0-0.”
NN The Smart Touch Control is not available.
If you forget the PIN code, press
the remote control buttons in the
following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTEM → 8 → 2 → 4 → P (Power
on).
3.After a few moments, the Smart Hub
automatically resets. The screen may go
black, then Smart Hub re-appears. In a
few moments, it starts the reinitialization
procedure.
4.To complete the re-initialization, go to
Step 2 in "To start Smart Hub for the first
time, follow these steps:" section of this
manual.
●● About Smart Hub
The About Smart Hub menu contains
functions that display information about
Smart Hub.
Detail: Lists information about Smart Hub
including version number, memory usage,
and the unique product ID.
Terms of Service Agreement: Display the
Terms of Service Agreement.
Using the Samsung Apps
Samsung Apps
™ → Samsung Apps
Samsung Apps is a store from which you can
download applications to use on Samsung
TV/AV equipment.
You can enjoy a variety of contents such
as videos, music, photos, games, useful
information etc. using the downloaded
applications.
New applications are added regularly.
Using the colored and function buttons with the
Samsung Apps
●● a Login / Logout
Log in or log out to your Samsung account.
●● b Filter by Price
To toggle the view between All, Paid and
Free.
●● { Sort
To sort the applications by Recommended,
Name, Date, or Downloaded.
NN You can sort all categories except Most
Popular.
●● } View Mode
Each time you select } using your remote,
the View Mode toggles between basic mode
and thumbnail mode.
●● π Previous
Move to previous page.
●● µ Next
Move to next page.
●● T Tools
Displays the option menu.
●● R Return
Moves to previous menu.
Using the Samsung Apps by category
The following categories are available:
●● What's New?
User can easily find newly (latest) registered
application.
●● Most Popular
Displays the most popular applications for
users.
●● Videos
Includes apps that provide video media such
as movies, TV shows and short length videos.
●● Games
Includes various game apps such as sudoku
and chess.
●● Sports
Includes apps that provide sports content
such as game results, images and short
length video.
●● Lifestyle
Includes apps that provide lifestyle media
services such as music, personal photo
management tools, and social networking
such as Facebook and Twitter.
●● Information
Includes apps that provide information
content such as news, financial information,
stock quotes, weather, etc.
●● Education
Includes apps that provide education
contents such as story book, dictionary, VOD
(Video on Demand) for kids etc.
●● My Apps
My Apps offers information about your
available App cash coupon, purchased app
list or already installed applications on your
TV like detailed information, download
contents etc.
NN You can purchase App cash that you
can use to buy applications through
tv.samsungapps.com.
●● Help
If you have questions about the Samsung
Apps, check this section first.
To search an application in Samsung Apps, follow
these steps:
1.On the Samsung Apps screen, select
Search Samsung Apps. The Search
window appears.
2.Enter a keyword you want to search using
your remote.
3.When done, select an entry field.
4.Wait until the search result screen
displays. Then you can select an
application you want in the search result
screen.
NN You can find the keyword in the search
history If you searched a keyword before.
Search
™ → Search
(May not be available, depending on your
country.)
Easily search for and access content from
diverse sources (e.g. applications, Your
Video, AllShare Play)
1.On the Smart Hub screen, select Search.
2.If you want to input a search term
directly, select an entry field. A keypad
screen appears. Enter the search term
using your remote.
NN If you want to search by category,
select a category using your remote.
Using the Search function by category
●● Your Video
Personalize your movie-watching with
a customized video on demand (VOD)
recommendation service.
●● Most Searched
You can search by selecting a key word in
the key word list. The key word list displays
words you frequently use for searches.
●● Top Application
You can search applications and services
in the application list. The application
list displays apps that users download
frequently.
●● Search History
You can find the keyword in the search
history if you searched a keyword before.
Using the colored and function buttons with the
Search
●● b Refresh
Refresh the Search function.
●● T Tools
You can set a general setting for Search
function or delete the search history.
●● R Return
Return to the previous menu.
Using the Tools menu with Search
●● General Settings
Keyword Recommendation: Turns on or off
the Keyword Recommendation function.
Search Scope: Sets a search scope. The
default is allowed all application.
To customize a search scope you want,
follow these steps:
1.On the Search screen, open the Tools
menu using your remote.
2.Select General Settings.
3.Select an application in the Search Scope.
A c mark disappears in the check box.
4.When done, Press the RETURNR button.
●● Search History
You can delete the keyword in the search
history. Also, If you select Delete All, delete all
your search history.
Your Video
™ → Your Video
(May not be available, depending on your country.)
Using this service from the Smart Hub, you
can get video recommendation and search
for movies from multiple providers.
Using the Your Video
1.On the Smart Hub screen, select Your
Video.
2.Enjoy your movie watching with a
customized video on demand (VOD)
recommendation service.
Family Story
™ → Family Story
Family Story feature allows you to share
photos, messages, and events with your
family.
●● Create Group
If you are starting Family Story for the first
time among your family members, you can
create a group and invite members.
●● Invite Members
After creating a group, you can invite your
family members who you want to share your
family's photos and events with.
●● Join Group
If you were invited to this service from your
family member, you can select Join Group to
enjoy Family Story service.
To create a family group, follow these steps:
1.On the Smart Hub screen, select Family
Story. The Family Story screen appears.
2.Select Create Group. The Create Group
screen appears.
3.Select AGREE. It is required to agree with
the terms prior to using Family Story.
4.Enter a Group Name, Your Name and Your
Phone Number using your remote.
NN If you want to add a group image,
select an image box. (An external
device containing photos must be
connected to your TV via USB.)
NN * Fields marked with an asterisk are
required.
5.When done, select Done. The group
creation is completed.
NN If you want to invite members to your
group, select Invite Members. If you
want to go your Family Story, select
Go to Family Story.
To invite members to your Family Story, follow
these steps:
1.From the starting menu of Family Story,
open the Tools menu using your remote,
and then select Group Members. The
Group Members screen appears.
2.Select Invite Members. The Invite
Members for your Family Story screen
appears.
3.Select Select to enter Name.. The keypad
screen appears.
4.Enter member's name using your remote.
When done, select Done.
5.Select Phone number or Samsung account
ID. The keypad screen re-appears.
6.Enter member's phone number or
Samsung account ID using your remote.
When done, select Done.
7.When done, select Done.
NN If you want to add more members,
select Add member, and repeat the
Step 3 and 7.
8.New member invitation has been
completed.
9.If invited by phone number, 4-digit invite
code will be generated and the code need
to be shared with the member. If invited
by Samsung Account, the member will be
notified about the invitation via e-mail.
Select OK to finish.
To join a group using the received invite code,
follow these steps:
1.Start Family Story and accept the terms.
2.You will see a pop-up message asking
about invitation type. If you were invited
by phone number, please select Invite
Code, or if you were invited by Samsung
account, please select Samsung Account.
3.If joining by Samsung Account, a list of
invitation from your family groups will be
displayed. Select Accept to join. You can
select Deny if you don't want to join the
invited group.
4.If joining by Invite Code, firstly enter your
phone number using your remote. When
done, select Done. Then you will see a list
of invitations from your family groups.
Select Accept to join. You can select Deny
if you don't want to join the invited group.
Enter the 4-digit invite code shared by
your family member, and then select Done
to finish.
5.Select OK. Joining your family group has
been completed.
Fitness
™ → Fitness
Using this function provided by Smart Hub,
Lets you manage Fitness using the exerciserelated application downloaded in the
Samsung Apps.
NN To use the Fitness, you should be logged
in Smart Hub.
Read these note before exercising...
NN Please do a warm-up or stretch before
exercising.
NN Stop exercising immediately if you feel
pain, or dizzy, exhausted, or short of
breath.
Create Your Profile
When you start Fitness for the first time,
you should create your own profile. On
Fitness screen, select Create Your Profile. A
pop-up message appears. Select Create Your
Profile.
NN To go to next step, move to right side
using your remote.
1.Name: Select First Name and Last Name
to put in a new user name. The keypad
screen appears. Enter your name using
the remote. When done, select OK.
2.Gender: Select your gender.
3.Birthdate: Enter your birthdate using
your remote. It will be used to personalize
some things for you.
4.Units: Select your preferred units. The
selected units will be applied all over
Fitness.
5.Height: Enter your height. This will be
used to calculate your body max index
(BMI).
6.Weight: Enter your weight. This will be
used to calculate your body max index
(BMI).
7.Complete: Creation of your profile is
finished. The TV displays the information
of your profile and BMI. To start the
Fitness, select Enjoy Fitness.
Using the Fitness with categories
●● Exercise
Provide information on your exercise goal,
current status and recommended contents.
●● Progress
Provide information on your basic body
profile, exercise progress, achievements for
your goals, etc..
Kids
™ → Kids
Using this function provided by Smart Hub,
lets you provides a quick launcher and the
recommended list to access the kids or
education-related application or contents
easily and quickly. Also, it helps user (parents)
to manage your kids.
Using the Kids with categories
●● Playground
Displays recommended contents and
applications. When you select an application
or content, the TV executes an application
or contents immediately.
NN The maximum number of contents list is
40.
NN The contents list can be edited by user
(parents). For more detailed information,
refer to "My Choice" in this section.
●● Sticker Book
Displays the Sticker Books collected stickers
which your kids received. Also, it can be
share with your Family Story.
Your kids can receive the sticker through
these methods:
–– By User (parent): Presents a sticker
using the Present Sticker function in the
Parents menu.
–– Automatically: Presents a sticker when
watching content.
Creating a Sticker Book
1.If you want to create a new Sticker
Book, select Create a New Sticker Book.
The Create a New Sticker Book screen
appears.
2.Enter the Sticker Book's name using your
remote. When done, select Next.
3.Select a color of the Sticker Book. When
done, select Next.
4.Check the created sticker book. If you
want to change a name, select Edit. If you
want to change a color, select Back.
5.When done, select Done. A new Story
Book is created.
NN You can create a new sticker book.
Maximum number of books is 10.
NN You can check arrived stickers in the Get
New Stickers. A new sticker will be saved
only 10 stickers which recently received.
●● Browse All
Displays the kids or education-related
applications list and all contents list.
NN When you select an application or
contents, if the application or contents
were not installed to the TV, the TV
displays the corresponding download
screen in the Samsung Apps screen.
To use the Browse All, follow these steps:
1.On the Browse All screen, select a
character you wish. The selected
character screen appears.
2.Select a contents you want play.
Videos: Displays the video contents of the
corresponding character.
Games: Displays the game contents of the
corresponding character.
Stories: Displays the e-book contents of
the corresponding character.
3.The detailed information screen of the
selected contents appears. You can play
the contents, share with your Family
Story, add to Playground, and give a
rating.
NN If you were purchased already, you
can play the contents. If you are not
purchased, you can download the
contents in the Samsung Apps.
●● Parents
Lets you can edit the Playground, give
stickers to your kids, check a usage time, and
set to alarm.
My Choice
You can add or delete the contents in the
Playground. The Playground displays the
added contents only.
To add or delete the contents in the
Playground, follow these steps:
1.On the Parents screen, select My Choice.
The My Choice screen appears.
2.Select contents you want to add or delete
in the list. A pop-up message appears.
3.Select Yes.
4.The selected contents will be added or
deleted.
Present Sticker
When your kids did a good job today, you
can present a sticker to your kids.
To present a sticker to your kids, follow
these steps:
1.On the Parents screen, select Present
Sticker. The Present Sticker screen
appears.
2.Select a sticker you want to present. A
pop-up message appears.
3.Select Yes.
4.Select a sticker book you want to present,
and then select Present.
NN If you want to check a sticker book,
select Check Now. You can check the
sticker in the selected sticker book.
5.The selected sticker will be presented to
your kids.
History
Lets you check a usage time of the
application of your kids through a graph.
Also, you can check a usage time of the each
contents of your kids. Change a date or
content title using your remote.
Set Alarm
Lets you can set the watching time of your
kids. When the time is ended, the alarm
window appears.
To set the watching time, follow these steps:
1.On the Parents screen, select Set Alarm.
The Set Alarm screen appears.
2.Select Timer.
3.Select time you wish. The alarm will be
set.
Web Browser
™ → Web Browser
(May not be available, depending on your
country.)
Using this function provided by the Smart
Hub, you can surf the Internet on your TV.
1.On the Smart Hub screen, select Web
Browser. The Web Browser screen
appears.
2.Surf the Internet in the same way as on a
PC.
Using the colored and function buttons with the
Web Browser
●● b Control Panel
Shows or hides the control panel in the top
of the screen.
●● { Link Browsing / Pointer Browsing
You can change the cursor to Link Browsing
mode or Pointer Browsing mode.
●● } PIP
Turns PIP on or off. With PIP on, you can
watch TV while using the Web Browser.
●● T Tools
Displays the Tools menu.
Control Panel: Shows or hides the control
panel in the top of the screen.
Link Browsing / Pointer Browsing: You can
change the cursor to Link Browsing mode or
Pointer Browsing mode.
PIP: Turns PIP on or off.
Add to Bookmark: Add to current page to
the Bookmarks.
Enable Grabbing / Disable Grabbing: You can
move to the direction you want a current
web page. To move a web page, select a web
page. Then move to direction you wish using
your remote.
NN Available only when cursor is set to
Pointer Browsing.
●● πµ Scroll up/down
You can scroll the page up or down.
NN Available only when cursor is set to Link
Browsing.
●● R Return
Close the Web Browser.
Using the Control Panel with Web Browser
The Web Browser has a series of icons
across the top of the screen. With these
icons, you can easily use the Web Browser.
The icons are described below, starting with
the icon on the far left of the screen.
●● Back
Moves to the previous web page.
NN If there is no saved previous web page,
this icon will not work.
●● Forward
Moves to the next web page if there are
saved URLs.
NN If there is no saved next web page, this
icon will not work.
●● Refresh / Stop
Refreshes the current page or stops the
current connection from loading.
●● Home Page
Goes to the URL you specified as your the
home page.
●● Zoom
You can select a zoom level of 50%, 75%,
100%, 125%, 150%, 200%, 300%, and Fit to
screen.
●● Bookmarks
Displays the Bookmarks screen. You can set
the current page as a bookmark or select a
favorite page to visit from the bookmark list.
You can also sort by Date, Name, or Times
Visited. To sort, select the Sort. When you
select Enter URL, you can enter in a new URL
address directly using your remote.
When you highlight a page, the Option
appears on the right. In the Option pop-up,
you can edit the selected page or delete the
selected page from bookmark list.
Using the Tools menu with Bookmarks
●● Delete All
Delete all bookmark lists.
●● Add to Bookmark
Sets the current page as a bookmark.
●● Import bookmarks
You can import a bookmark file saved in
the other device like a PC.
●● Export bookmarks
You can export a bookmark file from your
TV to the other device connected your
TV.
●● History
Displays the History screen. You can select a
web page to visit in the History list. You can
also sort by Date, Name, or Times Visited. To
sort, select the Sort. When you select Enter
URL, you can enter in a new URL address
directly using your remote.
When you highlight a page, the Option
appears on the right. In the Option popup you can delete the selected page from
the history list or add the selected page to
bookmark.
NN If you want to delete all history list, open
the Tools menu using your remote, and
then select Delete All.
●● URL Field
Shows the URL of the current page. If you
select the URL field, the URL pop-up appears.
Using your remote, you can enter in a new
URL directly.
●● Windows List
Displays list or images of open windows (the
Windows List). You can open a new page to
the list (using Open new window), select and
access a page in the list, select and close a
page in the list, or close all pages. When you
select Enter URL, you can enter in a new URL
address directly using your remote.
Using the Tools menu with Windows List
●● Open new window
Open the new web browser. A new web
browser automatically displays the home
page.
●● Close all windows
Close the currently opened all Windows
List. After closing all Windows List, TV
opens a new web browser automatically.
A new web browser automatically
displays the home page.
●● Search
Lets you search the web. When you select
the Search entry field, the Search screen
appears.
To search the web by word input, follow
these steps:
1.On the Search screen, select the search
engine. Also, you can select a different
search engine.
2.Select Please enter a keyword.. The
keypad screen appears.
3.Enter the word you want to search using
your remote. The TV searches the word
by search engine.
●● Share
Share the current web page to your Family
Story.
●● Options
You can configure the Web Browser settings.
Setting up the Web Browser
Move the cursor to the top of the screen,
and then select the Options icon.
●● Reading Tools
Provides an easy-to-read page by enlarging
the main text.
●● Approved Sites
Allows to restrict your children’s access to
inappropriate web pages. Therefore, this
function allows access of only the registered
web sites.
NN Every time you access the Approved Sites,
the PIN screen appears and you should
enter the PIN.
Approved Sites Feature: Turns on or off the
Approved Sites.
Reset password for Approved Sites: Change
the Approved Sites password.
Add current site: Lets you add the currently
displayed web site to the Approved Sites list.
Manage Approved Sites: Lets you key in
URLs to add to the Approved Sites List and
delete sites from the Approved Sites list.
NN If you turn Approved Sites on and have
not added any sites to the Clean site list,
you will not be able to access any Internet
sites.
●● Private Browsing On / Private Browsing off
Enable or disable the Privacy mode. When
the Privacy mode is enabled, the browser
does not retain the URLs of sites you visit. If
you want to enable Privacy mode, select Yes.
If the Privacy mode is running, the “Stop”
icon appears in front of the URL at the top of
the screen. To disable Privacy mode, select it
again when Privacy mode is enabled.
●● PIP Settings
Lets you configure the PIP function.
PIP Position: Select a position for the PIP
sub-picture.
Sound: Select the audio source you will hear
- Main or Sub - when PIP is on.
●● Web Browser Setting
You can configure Web Browser options.
Set as homepage: You can set the home
page.
–– Most visited: Set the most frequently
visited URL as the home page.
–– Current Page: Sets the current page as
the home page.
–– Bookmarks: Sets the bookmarks URL as
the home page.
–– Enter URL: Lets you key in the URL of the
page you want for your home page. The
keyboard works like a cell phone texting
keyboard.
Pop-up Block settings: Turns the Pop-up
Block on or off.
Ad Block Settings: You can determine
whether to block advertisements and select
the URLs for which advertisements are
blocked.
–– Ad Blocker: Turns the Ad Blocker on or
off.
–– Block current page: Adds the current
page to the blocked list.
–– Manage blocked sites: You can add a
website for which advertisements should
be blocked by directly keying in the URL,
or you can delete a website from the list.
General: You can delete your personal
information.
–– Delete history: Deletes the website
history.
–– Delete browsing data: Deletes Internet
access information such as cookies.
–– Reset Settings: Reset all web browser
settings to the factory defaults.
–– Hide Menu: Turns on or off the control
panel auto-hide.
Encoding: You can set the Encoding setting
for web pages to Automatic or Manual.
–– Auto select: Turns on or off the Encoding
setting for web pages automatically.
–– Setting: Select the Encoding settings for
web pages manually. Select an encoding
format from the encoding format list.
Pointer: You can set the speed of the cursor
when the cursor is set to Pointer Mode.
–– Pointer Speed: Select a pointer speed.
Browser Information: You can check the
version information about the Web Browser.
Skype
™ → Skype
Skype created a little piece of software that
makes communicating with people around
the world easy and fun.
With Skype you can say hello or share a
laugh with anyone, anywhere. And if both
of you are on Skype, it’s free. Communicate
with people around the world!
NN For more information, download the
Skype user’s manual from “www.
samsung.com.”
[Legal Statement]
Due to the various capabilities of products featuring the
Samsung Smart Hub - Content Service, as well as limitations
in the available content, certain features, applications,
and services may not be available on all devices or in all
territories.
Some features on Smart Hub may also require additional
peripheral devices or membership fees that are sold
separately. Please visit http://www.samsung. com for more
information on specific device information and content
availability. The services and availability of content through
Smart Hub are subject to change from time to time without
prior notice.
SMART Interaction
for LED 7500 series and above, PDP 8000 series
Using this function, you can access and
control menu options and functions using
speech, motions or face recognition.
INFORMATION BOOKLET DISCLAIMER
●● Face recognition Log-in
In order for Face recognition to function, a
thumbnail image of your face will be stored
in your TV for logging-in purposes.
Logging into the Smart Hub using Face
recognition may be less secure than using an
ID and password.
●● TV Camera Usage
Before using the TV Camera, you should be
aware that under some circumstances and
under certain legal conditions your use/
misuse of the TV Camera can result in legal
liability for you. By using the TV Camera,
you agree that you will not use the camera
(i) in locations where cameras are generally
prohibited (such as bathrooms, locker rooms
or changing rooms), (ii) in any manner that
will result in an invasion of a person’s privacy
or (iii) in violation of any applicable laws,
regulations or statutes.
When you use a TV camera, you should
check whether a tape attached or not in rear
of the TV camera, and then you can use a TV
camera after adjust a camera angle. When
you don't want to use a TV camera, we
recommend to use after a camera lens fixes
to upwards. In this case, Face recognition
and Motion Control are not available.
Voice Control
Menu → System → Voice and Motion Control → Voice
Control
Enable or disable the voice recognition
function. Lets you access and control menu
options and functions using speech.
NN For accurate voice recognition, refer to
the Standard Voice Command list at the
Samsung web site (www.samsung.com →
support → Manuals & Downloads).
NN Voice Control function can be affected
recognition by unclear pronunciation,
voice level, or surrounding noise.
NN To use Voice Control, you must
pronounce words and phrases clearly and
correctly in the language you selected in
Language.
NN Ambient noise may cause Voice Control
to malfunction. (Appropriate surrounding
noise: Below 40dB)
Your TV can "hear" your voice commands in
two ways:
–– Using the TV’s microphone. (Distant
Recognition)
NN We are recommended using Voice
Control function within about 13
ft with your TV. You can check the
usable distance by using Voice Control
Environment Test (System → Voice
and Motion Control → Voice Control
→ Voice Control Environment Test).
–– Using the VOICE˜ button on your remote.
(Close Proximity Recognition)
NN When you use the TV's microphone, the
words may not be recognized because of
ambient noise. If this occurs, try using the
VOICE˜ button on your remote. The TV
will be able to recognize a voice command
more easily.
NN The VOICE˜ button on your remote is
always activated. If you want to use the
TV's microphone, turn on Voice Control
(System → Voice and Motion Control →
Voice Control).
NN Say a voice command to proper volume
into the microphone of your remote
within 0.3 ― 0.9 feet. If voice level is too
small or large, voice command may not be
recognized.
NN If a menu option or function is not
supported by the Voice Control function,
we suggest trying the Motion Control
function. To use the Motion Control, raise
your hand while opening it toward the
screen, hold it for a moment and then
wave it 3~4 time to the left and right.
Motion Control starts. If the Motion
Control starts, the cursor is displayed at
the center of the screen and the Motion
Guide Bar Size is at the bottom of the
screen.
●● Voice Control
Turns the Voice Control function on or off.
NN The VOICE˜ button on your remote is
always activated.
●● Language
Select the recognition language you want to
use.
●● Trigger Words
You can select the trigger words that start
the Voice Control function. Alternatively you
can turn on your TV using the Trigger Words
if Voice Control function is set to On.
–– If Trigger Words is set to Hi TV, say Hi TV
Power On.
–– If Trigger Words is set to Smart TV, say
Smart TV Power On.
●● Voice Command Bar Size
Set the Voice Command Bar Size mode to
Minimum or Full. Minimum displays the least
number of words and phrases you can use.
Full displays all the words and phrases.
●● Voice Sensitivity
You can configure the sensitivity of Voice
recognition.
Howling: Select howling levels.
Recognition responsiveness: Select the
responsiveness level of Voice recognition.
●● Voice Control Environment Test
You can test the amount of ambient noise
level detected by the TV microphone.
–– Noise Test: This test checks the amount
of ambient noise detected by the TV
microphone. Too much ambient noise
will prevent Voice Command from
functioning. To run, select Next using
your remote. The test starts and takes
a few seconds. Please keep as quiet as
possible during the test.
–– Mic & Speaker Test: Determines if the
sound from the TV speakers picked up
by the TV microphone will disrupt Voice
Command. To run, select Start using your
remote. The test starts and takes a few
seconds. Please keep as quiet as possible
during the test.
NN Available only when Speaker Select is
set to TV Speaker.
–– Voice Control Test: This test checks the
volume level and clarity of your voice for
use with Voice Control. Select Start using
your remote. After the test starts, say
the test words listed in the instructions as
loudly and clearly as you can.
NN If the test is not successful, select
Retest, and then say the words loudly
and clearly again.
To use the Voice Control function, follow these
steps:
NN If Voice Control function is set to On, the TV
may be turned on automatically by effect of
the ambient environment.
1.Say the Trigger Words that you selected
into the microphone embedded in the
TV or press the VOICE˜ button on your
Smart Touch Control. The TV displays the
Voice Command Bar Size.
NN When you use Voice Control, the TV's
volume is set to 5 automatically.
2.Say a word or phrase listed in the Voice
Command Bar Size.
NN Pronounce the word or phrase clearly
and correctly in the language you
selected in Language.
3.Wait until recognition is complete, and
then say the next command in the same
fashion.
NN To exit the Voice Control mode, say
the Trigger Words or "Cancel" using
the TV's microphone or press the
RETURNR button.
Using the Voice Text Input Mode
1.Say "Search All" while in the Voice Control
mode.
NN When you use a QWERTY keypad
screen, you can use the Voice Text
Input Mode. Say the Trigger Words
that you selected into the microphone
embedded in the TV or press the
VOICE˜ button on your Smart Touch
Control. You cannot use it for some
UIs such as URL input boxes.
2.Say the word or phrase you wish to
search for.
3.The TV executes the spoken function.
NN Voice Control performance levels will vary
based on the language spoken.
Motion Control
Menu → System → Voice and Motion Control →
Motion Control
Enable or disable the Motion Control
function. Lets you control your TV by
moving the TV cursor using specific motions.
NN Motion Control function can be affected
recognition by motion posture, or
ambient brightness conditions.
NN Some applications may not support
Motion Control.
NN You may experience physical fatigue
when you use the Motion Control for a
long time.
NN To use the Motion Control, please avoid
direct sunlight.
NN We are recommended using Motion
Control function within about 5 — 13 ft
with your TV. TV Camera's recognition
range may differ depending on the angle
of camera or other conditions. You can
check the recognition range of TV camera
by using Motion Control Environment
Test (System → Voice and Motion Control
→ Motion Control → Motion Control
Environment Test).
●● Motion Control
Turns the Motion Control function on or off.
●● Motion Guide Bar Size
Set the Motion Guide Bar Size mode to
Minimum or Full.
●● Motion Control Environment Test
You can test the brightness of room and the
camera angle.
–– Brightness Test: This test checks to
see if your room is bright enough for
Motion Control to work properly. Select
Start using your remote. The test starts
and takes a few seconds. (Appropriate
ambient brightness: 50 – 500 Lux)
NN Do not illuminating a sunlight or lights
directly into the camera lens.
NN Make sure that the camera lens is cloaked
by an object.
–– Camera Angle Test: On the Camera
Angle Test screen, select Start using
your remote. A rectangle appears on the
screen. Move yourself into the rectangle
by adjusting the camera or moving
yourself in front of the camera. If you are
not within the rectangle position, the test
may not work properly. After aligning
your body with the TV, raise your hand
while opening it toward the screen, hold it
for a moment and then wave it 3~4 times
to the left and right.
To use the Motion Control function, follow these
steps:
1.To use the Motion Control, raise your
hand while opening it toward the screen,
hold it for a moment and then wave it 3~4
time to the left and right. Motion Control
starts. If the Motion Control starts, the
cursor is displayed at the center of the
screen and the Motion Guide Bar Size is at
the bottom of the screen.
2.Control the TV using your hands. For the
useable motions, see below.
NN Note that the Motion Control function
closes if your hands go out of the camera
range.
NN While using the Motion Control, if you
use the other devices (i.e. remote control,
keyboard, etc.), Motion Control closes.
Controlling the TV with your hands using
motions
●●
●●
Access Motion Control
–– Action: Spread your hand in the direction
of the camera, and shake it three or four
times from a side to side.
Pointing Navigation
Moves the cursor to the position you want.
–– Action: Spread your hand and guide the
cursor to position you want.
●●
Run
Selects an item or executes a command that
is indicated by the cursor or is highlighted.
–– Action: Clench your fist.
NN When you are viewing a page, you can
use the Run motion to move the page in
the direction you want. To move a page,
clench your fist, keep it clenched, and
then move it in the direction you want the
page to move. Note that not all pages can
be moved.
●●
Return
Return to the previous menu.
–– Action: Spread your hand and rotate it
counterclockwise.
●● Channel / Volume Control
Changes the channel or adjust the volume.
NN If you use the Motion Control function
while watching a channel, the channel /
volume control screen appears.
–– Action: Use the Pointing Navigation
motion to move the cursor to the channel
or volume controller, and then uses the
Run motion to adjust the channel or
volume.
NN If you use the Run motion once, it has
the same effect as pressing a button
on your remote. If you hold the Run
motion, it has the same effect as
pressing and holding a button on your
remote.
●●
Scroll
Scroll the page in the direction you want.
For example, suppose that you want to scroll
down.
NN Some applications may not support this
function.
1.Move the cursor to the bottom of the
screen (page scroll zone) using the
Pointing Navigation motion.
2.Move the cursor to the center of the
screen using the Pointing Navigation
motion.
3.The page will move down.
Face recognition
™ → Tools → Settings → Account Manager → Face
recognition
Enable or disable the Face recognition
function. Lets you register your face in your
Samsung account. Also, you can log in to the
Samsung account using the Face recognition
function without inputting your account ID
or your account password.
NN You can register your face in only one
account.
To register your face in your Samsung account,
follow these steps:
NN To use this function, you must log into Smart
Hub. If you don't have a Samsung account, you
should create one before using this function.
To create your Samsung account, refer to
“Creating an Account” in Smart Hub.
1.On the Smart Hub screen, open the Tools
menu using your remote, and then select
Settings.
2.Select Account Manager. The Account
Manager screen appears.
3.Select Face recognition. The Face
recognition screen appears.
4.Move your face into the square in the
center of the screen, and then wait until a
square changes from red to green.
NN If Face recognition fails, select Retry,
and then try again.
5.When done, your face is now registered
in your Samsung account. The Continue
to Register Service window appears.
NN If you want to register service later,
select OK. You can register services
later using the Link to other accounts
in the Smart Hub menu (Tools →
Settings → Account Manager → Link
to other accounts).
To log in to your Samsung account using Face
recognition, follow these steps:
NN If you use Face recognition to log into Smart
Hub, it may be less secure than logging in with
a password.
1.With the Smart Hub screen displayed,
select a using your remote. The Samsung
Account screen appears.
2.Select Face Recognition Mode. The Face
recognition screen appears.
NN To return to the Samsung Account
screen, select Password mode.
3.The TV starts Face recognition. Face
the front of the TV screen. The TV will
recognize your face automatically.
NN A Green square indicates a registered
face. A red-square indicates an
unregistered face.
NN If the TV fails to recognize your face,
try again.
4.The TV logs you into your Samsung
account automatically.
NN If the TV recognizes two or more, the
Samsung account list appears. Select
your account to log in.
NN If your face is unregistered, you can
register your face in your Samsung
account. Follow steps 4 through 5
in the “To register your face to your
Samsung account, follow these steps:”
procedure above.
NN If you have no account, you can create
one, you can create an account. For
more detailed information, refer to
“Creating an Account” in Smart Hub
section.
Specification for SMART Interaction
Voice Control
●● Wake On Voice
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Surrounding Noise
~ 40dB
Distance
1M ― 4M
Required Voice Level
60 dB or higher
Angle
±30˚
TV Volume(dB)
Step 0
Supported Languages
3 languages
Supported languages may differ depending
on the model or Voice Control setting.
●● Magic Word
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Surrounding Noise
~ 40dB
Distance
1M ― 4M
Required Voice Level
60 dB or higher
Angle
±30˚
TV Volume(dB)
Step 10
Supported Languages
3 languages
Supported languages may differ depending
on the model or Voice Control setting.
●● Embedded Voice Recognition
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Surrounding Noise
~ 40dB
Distance
1M ― 4M
Required Voice Level
60 dB or higher
Angle
±30˚
TV Volume(dB)
Step 5
Supported Languages
3 languages
Supported languages may differ depending
on the model or Voice Control setting.
NN To view all commands list of desired language,
refer to the Guide at the Samsung web site
(www.samsung.com → Support → Manuals &
Downloads).
Motion Control
●● Conditions for Recognition
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Operating Speed
Slow / Fast
Distance
1.5M ― 4M
Environment
[Illumination]
50Lux ― 500Lux
Horizontal Angle
±15˚
Background Recognition
White or Grey
Vertical Angle
±10˚
Face recognition
●● Conditions for Recognition
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Skin Color
White, Yellow, Black,
Indian, Hispanic
Distance
1.5M ― 4M
Environment
[Illumination]
50Lux ― 500Lux
Horizontal Angle
±15˚
Background Recognition
White or Grey
Vertical Angle
±10˚
Response Time
2 sec (for 1 person) ―
8 sec (for 5 persons)
Smart Touch Control
●● Touch
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Within 300 msec.
(Connected State)
Distance
30cm
Response Time
Within 1.5 sec.
(Disconnected State)
4M
Vertical Angle
0˚ ― 20˚
Horizontal Angle
0˚ ― 85˚
●● Server Voice
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Management
Specifications
Surrounding Noise
45 ― 50dB
Voice Recognition
Distance
10cm ― 30cm
Remote Control
Operating Distance
30cm ― 4M
Required Voice Level
60 dB or higher
TV Volume (dB)
Step 50
Supported Languages
3 languages
Response Time
~ 5 sec
●● Hot Keys
Environmental and
Evaluation Criteria
Condition
Evaluation Item
Connected State
Management
Specifications
30cm
Distance
Disconnected State (IR)
4M
Vertical Angle
0˚ ― 20˚
Horizontal Angle
0˚ ― 85˚
●● Pairing
Environmental and
Evaluation Criteria
Condition
Distance
30cm
Evaluation Item
Management
Specifications
30cm
Distance
Angle
0˚
4M
Environment
The operation should
not be effected.
0˚
Angle
Response Time
1min.
45˚
Panel Key
●● Usability
Environmental and
Evaluation Criteria
Condition
Temperature/Humidity
0℃ ― 50℃
50% ― 75%
Evaluation Item
Management
Specifications
Evaluation Item
Management
Specifications
TV Camera
●● Internal
Environmental and
Evaluation Criteria
Condition
Surrounding Noise
~ 40dB
Environment
[Illumination]
30Lux ― 500Lux
Temperature/Humidity
0℃ ― 50℃
50% ― 75%
1M
Distance (AF Operation)
Angle (AF Operation)
4M
45˚(Horizontal)
20˚(Vertical)
●● External
Environmental and
Evaluation Criteria
Condition
Surrounding Noise
~ 40dB
Environment
[Illumination]
30Lux ― 500Lux
Temperature/Humidity
0℃ ― 50℃
50% ― 75%
Evaluation Item
Management
Specifications
1M
Distance (AF Operation)
Angle (AF Operation)
4M
45˚(Horizontal)
20˚(Vertical)
AllShare Play
™ → AllShare Play
Enjoy photos, music and/or movie files saved
on a USB Mass Storage Class (MSC) device
and/or your PC.
NN To view content on a USB device, you
should plug the device into a USB port on
the TV.
NN If you want to use a USB HDD, we
recommend to use a USB HDD that has a
power adapter.
Connecting a USB Device
1.Turn on your TV.
2.Connect a USB device containing photo,
music and/or movie files to the USB port
on the TV.
3.When a USB device is connected to the
TV, the New device connected. window
appears. Select a category you want to
play among Videos, Photos and Music.
NN The TV may display the files on the USB
device automatically if it is the only device
connected.
Disconnecting a USB Device
Method 1: Using the SOURCEs button.
1.Press the SOURCEs
button for Standard Remote Control or select
a Source for Smart Touch Control .
2.Select a desired USB device,
and then press the TOOLST
button for Standard Remote Control or
T for Smart Touch Control button. The Tools
menu appears.
3. Select Safely Remove USB, and then wait
until the selected USB device is disconnected.
You can remove a USB device from the TV.
Method 2: Using the AllShare Play home
screen.
1.Go to AllShare Play home screen. (™ →
AllShare Play)
2.Select any category except
My List, and then press the E
button for Standard Remote Control or press
the Touch Pad for Smart Touch Control .
3.Select a desired USB device,
and then press the TOOLST
button for Standard Remote Control or
T for Smart Touch Control button. The Tools
menu appears.
4.Select Safely Remove USB, and then
wait until the selected USB device is
disconnected. You can remove a USB
device from the TV.
NN To remove a USB device from the TV,
we recommend use Safely Remove USB
function.
Read this information before using AllShare Play
with a USB device.
Restriction and Caution
ŒŒ Before connecting your device to the TV,
please back up your files to prevent them
from damage or loss of data. SAMSUNG is
not responsible for any data file damage
or data loss.
ŒŒ Connect a USB HDD to the dedicated USB
(HDD 5V 1A) port.
ŒŒ Do not disconnect the USB device while it
is loading.
ŒŒ If you connect a USB device with a USB
extension cable, the TV may not recognize
the USB device or read the files on the
device.
ŒŒ If a USB device you connect to the TV is
not recognized, the files on the device are
corrupted, or a file in the list is not played,
connect the USB device to a PC, format
the device and check the connection.
ŒŒ If a file you deleted from the PC is still
found when you run Smart Hub, use the
“Empty the Recycle Bin” function on the
PC to permanently delete the file.
ŒŒ If the database of the saved file list cannot
be constructed because there is no free
space on the USB device, you may not be
able to view a new file even if you have
added the file to the USB device.
Supported Devices
ŒŒ Certain types of USB Digital camera and
audio devices may not be compatible with
this TV.
ŒŒ AllShare Play supports only USB Mass
Storage Class (MSC) devices. MSC is a
Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb
drives, Flash Card Readers and USB HDD
(USB HUB are not supported). Devices
should be connected directly to the TV’s
USB port.
ŒŒ More than 3TB USB HDD is not supported.
ŒŒ If more than 2 PTP devices are connected,
you can only use one at a time.
ŒŒ If more than two MSC devices are
connected, some of them may not be
recognized. A USB device that requires
high power (more than 500mA or 5V)
may not be supported.
ŒŒ If the TV has no input during the time set
in Auto Protection Time, the Screensaver
will run.
ŒŒ The power-saving mode of some
external hard disk drives may be released
automatically when you connect them to
the TV.
File system and formats
ŒŒ The USB function might not work
properly with unlicensed multimedia files.
ŒŒ MTP (Media Transfer Protocol) is not
supported.
ŒŒ The file system supports FAT16, FAT32
and NTFS.
ŒŒ AllShare Play supports only the Sequential
jpeg format. It does not support the
Progressive jpeg format.
ŒŒ The higher the resolution of the image,
the longer it takes to display on the
screen.
ŒŒ The maximum supported JPEG resolution
is 15360 X 8640 pixels.
ŒŒ If a file is corrupted or the TV does not
support the file type, the Not Supported
File Format. message appears.
ŒŒ If the files are sorted by Folder view, the
TV can display the names of up to 1000
files in each folder.
ŒŒ If the number of files and folders saved
on a USB storage device is approximately
over 8000, the files and folders may not
appear and some folders may not be
opened.
ŒŒ The TV cannot play MP3 files with DRM
that have been downloaded from a for
pay site. Digital Rights Management
(DRM) is a technology that supports the
creation, distribution, and management
of digital content in an integrated and
comprehensive way, including protecting
the rights and interests of content
providers, preventing illegal copying
of contents, and managing billings and
settlements.
ŒŒ Even if the file to be played is encoded by
a supported format, an error message
may appear due to a sub container or
profile problem.
Connecting to a PC through a network
You can play pictures, music, and videos
saved in your PC through a network
connection in the AllShare Play mode.
NN For more information on how to
configure your TV and connect it to
your network, refer to “Setting up the
Network” in this manual.
NN To view content located on your PC, you
must have connected your TV and your
PC to your LAN and downloaded and
installed AllShare PC Software on your
PC.
NN We recommend you locate both your
TV and PC in the same network subnet.
IP addresses have four parts, separated
by periods (111.222.333.444). If your TV
and PC are in the same subnet, the first 3
parts of the TV IP address and the PC IP
address (111.222.333) will be the same
and only the last part (the host address)
will be different.
The following AllShare Play functions are not
supported when you are playing media from
a PC connected through a network:
NN The Background Music and Background
Music Setting functions.
NN Sorting files by preference in the Photos,
Music, and Videos folders.
–– The † or … function while a movie is
playing.
NN DivX DRM are not supported.
NN Set your PC firewall program so that
AllShare PC Software is a permitted
program.
NN Depending on the Internet server, when
you use AllShare Play through a network
connection:
–– The sorting method may vary.
–– The Scene Search function may not be
supported.
–– The Resume function, which resumes
playing of a video, may not be
supported.
–– The Resume function does not support
multiple users. (It memorizes only the
point where the most recent user
stopped playing a video.)
–– The search function may not work
depending on the content information.
NN You may experience file stuttering while
playing a video in AllShare Play through a
network connection.
Using the AllShare Play
AllShare Play enables you to enjoy the
following services. You need to log in to your
Samsung account to use web storage or
social services.
AllShare Play can play various contents in
three ways:
–– Using USB Device: You can play videos,
photos, or music from a connected USB
device.
–– Using DLNA or Web storage: You can play
various contents from devices connected
to your home network or web storage.
–– Using Social Services: You can play some
content from social services such as
Family Story, Facebook or Picasa.
NN Before using Facebook or Picasa, it should
be installed in the Smart Hub.
NN To use SugarSync, Facebook, or Picasa,
you should log in to corresponding
application. Alternatively, you can
register your application account in to
your Samsung account. To register your
application account, refer to "Configuring
the Smart Hub with Settings" in the Smart
Hub section.
NN To use Family Story, you should log in
to your Samsung account. Before using
Family Story, you should join a group at
least one more.
NN You can transfer a desired content to
other device connected to the TV.
Contents Type
Supported transfer device
USB
DLNA, SugarSync, Family
Story, Picasa, Facebook
Camera
DLNA
DLNA
USB
SugarSync
USB
Family Story
USB
Picasa
USB
Facebook
USB
Mobile device
USB
My List (In AllShare Play)
™ → AllShare Play → My List
Using this function, you can access the
content easily and quickly.
●● Recently Played
Displays the videos, photos or music file list
of recently played. If you have a file you want
to play again, use this category.
NN When you play a file from the Recently
Played list, and the USB device is not
connected or the file is not found, the
"Cannot find the file you're looking for."
message appears.
NN Up to 48 files are listed in descending
order of playing time on the basis of the
time configured on the TV so that the last
played file comes first.
NN When you try to play a file on a mobile
phone, the file may not be played.
●● What's New
Displays the newly updated videos, photos
or music file saved on the USB device or your
PC. If you have a newly updated file you want
to play, use this category.
●● Playlist
Displays the Playlist files saved on the USB
device or your PC. If you want to play a
playlist, select the playlist. The selected
playlist will play immediately.
NN You can create up to 12 playlists.
NN You can add up to 100 files to a single
playlist.
NN You can only add one type of content to a
single playlist. For example, you can only
add music files to a playlist that includes
music files.
Creating the Playlist
1.Select the desired file in the Videos,
Photos, or Music file list.
2.Open the Tools menu using your remote,
and then select Add to Playlist.
3.Select a file you want to add. The c mark
appears in the check box.
4.Repeat Step 3 to select additional files.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Add. The Add to
Playlist screen appears.
6.Select Create New. The Create a new
playlist screen appears.
7.Enter playlist name using your remote.
8.When done, select Done. The newly
playlist is created.
To add files to playlist, follow these steps:
1.Follow Steps 1 through 4 in the “Creating
the Playlist” procedure.
2.Select a playlist to add files. The files will
be added to playlist you selected.
To delete one or more files in the Playlist,
follow these steps:
1.Select a playlist you want to edit.
2.Open the Tools menu using your remote,
and then select Edit Playlist. The Edit
Playlist screen appears.
3.Select a file you want to delete. The c
mark appears in the check box.
4.Repeat Step 3 to select additional files.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Remove. A pop-up
message appears.
6.Select Yes. The selected file(s) be removed
in the Playlist.
Videos (In AllShare Play)
™ → AllShare Play → Videos
You can play video files saved on USB device
and/or your PC.
NN For more information about the subtitle
formats and codec formats, refer to
"Supported Subtitle and AllShare Play file
formats" in the Other Information section.
Playing a Video
1.On the AllShare Play screen, select Videos.
2.Select the device you want to play.
3.Select the desired video in the file list.
NN If you stop the playing, you can play the
video later from the point where you
stopped it.
NN The file name appears on the top with
its playing time.
NN If video time information is unknown,
the playing time and progress bar are
not displayed.
Playback control button with Videos
●● † / …
Each time you select † or … using your
remote, the playback speed change as
follows. († 1 / † 2 / † 3 / … 1 / … 2 / … 3)
●● l, r Standard remote control / Slide to left or
right direction
Smart Touch Control
Jump to backward or forward from
current position.
●● ∑
Pause the scene.
–– In pause mode, select …. Each time
you select … using your remote, the
playback speed is reduced to „ 1/8 /
„1/4 / „1/2.
–– In pause mode, select ∑. Each time
you select ∑ using your remote, a new
frame will be appear.
NN To return to normal speed playback,
select ∂ using your remote.
NN The product does not play sound in
stop mode.
NN Stop motion operates only in the
forward direction.
Using the Tools menu with Videos
●● On the file list screen, you can use the
following these options:
–– View
You can sort the file list by selecting a sort
criteria you want.
–– Selection Play
You can play by selecting the desired
music file in the file list.
–– Send
Lets you send your video files with your
Family Story or other devices.
NN If you want to use this function, you
should log in the Smart Hub.
–– Login / Logout
You can login or logout your Smart Hub
account.
–– Add to Playlist
Lets you make your own playlist. When
you use the playlist, you can play music
you want to listen easily and quickly.
–– Go to playlist
Moves to Playlist screen.
–– Information
Displays detailed information about the
selected file.
●● During playback, you can use the following
these options:
–– Go to Videos List
Moves to the file list screen.
–– Play from the Beginning
You can restart a video file from the
beginning.
–– Scene Search
You can use the Scene Search function
during playback to view or start a movie
from the scene of your choice.
NN If the index information is damaged or
unsupported, you will not be able to
use the Scene Search function.
–– Title Search
You can move directly to another title.
–– Time Search
Search the video or input the play time
directly using your remote.
–– Repeat Mode
You can play movie files repeatedly.
–– Picture Size
You can adjust the picture size to your
preference.
–– Picture Mode
You can change the Picture Mode.
–– Sound Mode
You can change the Sound Mode.
–– Audio Language
You can enjoy video in one of supported
languages. The function is enabled only
when you play stream-type files which
support multiple audio formats.
–– Subtitle
You can view a subtitle. You can select
a specific language if the subtitle file
contains multiple languages.
–– Subtitle Settings
Displays the Subtitle Settings. You can set
up a subtitle option.
–– Information
Displays detailed information about the
selected file.
Viewing the file lists
NN When you use the AllShare Play function
with Family Story, Facebook or Picasa
rather than a USB device, View is not
supported.
1.To sort files in the file lists, select } using
your remote. The View screen appears.
2.Select a sort criteria you want.
●● Folder view
Displays the whole folder. You can view
the file name and thumbnail by selecting
the folder.
●● Title
Sorts and displays the file title in Symbol /
Number / Alphabet / Special order.
●● Latest Date
Sorts and shows files by the latest date.
●● Earliest Date
Sorts and shows files by the earliest date.
Send your video files
Lets you send your video files with your
Family Story or other devices.
NN If you want to use this function, you
should log in the Smart Hub.
1.For example, suppose that you want to
send with your Family Story.
2.To send video files in the file list, open the
Tools menu using your remote, and then
select Send.
3.Select a video file you want to send. The
c mark appears in the check box.
4.Repeat Step 3 to select additional tracks.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Send. The Send screen
appears.
6.Choose the destination device to send.
7.Choose the family group to share. A popup window appears.
8.Enter a message to send to family group
you selected.
NN In the QWERTY keypad screen, you
can use the keyboard connected to
the TV.
9.When done, select Send.
Photos (In AllShare Play)
™ → AllShare Play → Photos
Viewing a photo (or slide show)
NN For more information about the subtitle
formats and codec formats, refer to
"Supported Subtitle and AllShare Play file
formats" in the Other Information section.
1.On the AllShare Play screen, select
Photos.
2.Select the device you want to play.
3.Select the desired photo file in the file list.
The TV displays the selected photo file.
4.To start the slide show, select ∂ using
your remote.
NN To change a photo manually, press the
l or r button. Standard remote control
/ To change a photo manually, slide
to left or right direction in the Touch
Pad. Smart Touch Control
NN During the slide show, all files in the
file list are displayed in order, starting
from the file you selected.
NN When watching a photo file or slide
show, you can add background music
if you have music files on same device.
NN The background music cannot be
changed until the BGM has finished
loading.
Playback control button with Photos
●● † / …
The slide show speed change as follow
(Slow, Normal, Fast).
●● l, r Standard remote control / Slide to left or
right direction
Smart Touch Control
Change a previous or next photo.
●●
Return to the file list screen.
●● ∂
Start the slide show.
●● ∑
Pause the slide show.
Using the Tools menu with Photos
●● On the file list screen, you can use the
following these options:
–– View
You can sort the file list by selecting a sort
criteria you want.
–– Selection Play
You can play by selecting the desired
music file in the file list.
–– Send
Lets you send your photos with your
Family Story or photo-related application.
NN If you want to use this function, you
should log in the Smart Hub.
–– Login / Logout
You can login or logout your Smart Hub
account.
–– Add to Playlist
Lets you make your own playlist. When
you use the playlist, you can play music
you want to listen easily and quickly.
–– Go to playlist
Moves to Playlist screen.
–– Information
Displays detailed information about the
selected file.
●● When playing a photo file, you can use the
following these options:
–– Go to Photos List
Moves to the file list screen.
–– Start Slide Show / Stop Slide Show
You can start or stop a slide show.
Alternatively, select ∂ or ∑ using your
remote.
–– Slide Show Speed
You can select the slide show speed
during the slide show. Alternatively, select
† or … using your remote.
–– Slide Show Effect
You can set various slide show effects.
–– Background Music On / Background
Music Off
You can start or stop background music.
–– Background Music Setting
You can set and select background music
when watching a photo file or slide show.
–– Picture Mode
You can change the Picture Mode.
–– Sound Mode
You can change the Sound Mode.
NN Available only when the background
music is set to on.
–– Zoom
You can zoom into images in full screen
mode.
–– Rotate
you can rotate images.
–– Information
Displays detailed information about the
selected file.
Viewing the file lists
NN When you use the AllShare Play function
with Family Story, Facebook or Picasa
rather than a USB device, View is not
supported.
1.To sort files in the file lists, select } using
your remote. The View screen appears.
2.Select a sort criteria you want.
●● Folder view
Displays the whole folder. You can view
the file name and thumbnail by selecting
the folder.
●● Title
Sorts and displays the file title in Symbol /
Number / Alphabet / Special order.
●● Latest Date
Sorts and shows files by the latest date.
●● Earliest Date
Sorts and shows files by the earliest date.
●● Monthly
Sorts and shows photo files by month.
Send your photos
Lets you send your photos with your Family
Story or other devices.
NN If you want to use this function, you
should log in the Smart Hub.
1.For example, suppose that you want to
send with your Family Story.
2.To send photo files in the file list, open the
Tools menu using your remote, and then
select Send.
3.Select a photo file you want to send. The
c mark appears in the check box.
4.Repeat Step 3 to select additional tracks.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Send. The Send screen
appears.
6.Choose the destination device to send.
7.Choose the family group to share. A pop-
up window appears.
8.Enter a message to send to family group
you selected.
NN In the QWERTY keypad screen, you
can use the keyboard connected to
the TV.
9.When done, select Send.
Music (In AllShare Play)
™ → AllShare Play → Music
Playing Music
NN For more information about the subtitle
formats and codec formats, refer to
"Supported Subtitle and AllShare Play file
formats" in the Other Information section.
1.On the AllShare Play screen, select Music.
2.Select the device you want to play.
3.Select the desired music file in the file list
or select ∂ using your remote.
NN To move a previous page, select b
using your remote. To move a next
page, select { using your remote.
NN When the music is playing, you can
search the music file by selecting † or
… using your remote.
NN If the sound is abnormal when you play
MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3
file may cause a sound problem.)
Playback control button with Music
During playback, you can use additional
functions at the bottom right of the screen.
●● Play / Pause
You can start or pause a music file.
Alternatively, you can select ∂ or ∑ using
your remote.
●● Repeat Mode
You can play movie files repeatedly.
●● Shuffle Mode
You can play the music sequentially or
randomly.
●● Sound Mode
You can change the Sound Mode.
Using the Tools menu with Music
●● You can use the following these options:
–– View
You can sort the file list by selecting a sort
criteria you want.
–– Selection Play
You can play by selecting the desired
music file in the file list.
–– Send
Lets you send your music files with your
Family Story or other device.
NN If you want to use this function, you
should log in the Smart Hub.
–– Login / Logout
You can login or logout your Smart Hub
account.
–– Add to Playlist
Lets you make your own playlist. When
you use the playlist, you can play music
you want to listen easily and quickly.
–– Go to playlist
Moves to Playlist screen.
–– Encoding
You can select an encoding format from
the encoding format list.
–– Information
Displays detailed information about the
selected file.
Playing selected music files using Music
1.Select the desired music file in the file list.
2.Open the Tools menu using your remote,
and then select Selection Play.
3.Select the tracks you want to add. The c
mark appears in the check box.
4.Repeat Step 3 to select additional tracks.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Play. The selected
music files will play.
Viewing the file lists
NN When you use the AllShare Play function
with Family Story, Facebook or Picasa
rather than a USB device, View is not
supported.
1.To sort files in the file lists, select } using
your remote. The View screen appears.
2.Select a sort criteria you want.
●● Folder view
Displays the whole folder. You can view
the file name and thumbnail by selecting
the folder.
●● Title
Sorts and displays the file title in Symbol /
Number / Alphabet / Special order.
●● Artist
Sorts the music file by artist in
alphabetical order.
●● Album
Sorts the music file by album in
alphabetical order.
●● Genre
Sorts music files by the genre.
Send your music files
Lets you send your music files with your
Family Story or other devices.
NN If you want to use this function, you
should log in the Smart Hub.
1.For example, suppose that you want to
send with your Family Story.
2.To send music files in the file list, open the
Tools menu using your remote, and then
select Send.
3.Select a music file you want to send. The
c mark appears in the check box.
4.Repeat Step 3 to select additional tracks.
NN To select all the files in the list, select
Select All. To cancel a selection, select
the file again.
5.When done, select Send. The Send screen
appears.
6.Choose the destination device to send.
7.Choose the family group to share. A pop-
up window appears.
8.Enter a message to send to family group
you selected.
NN In the QWERTY keypad screen, you
can use the keyboard connected to
the TV.
9.When done, select Send.
Using the DLNA Function
™ → AllShare Play
You can play media contents including
videos, photos, and music saved on your
mobile phones or the other devices (such as
your PC) by controlling them on the TV via
the network.
For more information, visit “www.samsung.
com” or contact the Samsung call center.
Mobile devices may need additional software
installation. For details, refer to each device’s
user’s guide.
NN If your Samsung TV connects to a non-
Samsung DLNA server, a compatibility
issue may occur during video playback.
NN By connecting your Samsung TV to a
network via AllShare Play, you can use
Samsung’s original functions as follows:
–– Playback of various video formats
(DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
–– Video thumbnail feature
–– Bookmark function (to resume video
playback)
–– Auto-chaptering (scene navigation)
–– Digital content management
–– Compatibility with various subtitle
formats (SRT, SMI, SUB, TXT, TTXT)
–– Search with file names
–– And many others
NN To use the original DLNA functions of
Samsung fully, it is recommended that
you use the AllShare™ software provided
with your TV.
AllShare Settings
Menu → Network → AllShare Settings
Shows a list of mobile phones or connected
devices which have been set up to use
AllShare Settings with this TV.
NN The AllShare Settings function is available
in all devices which support DLNA DMC.
●● Allowed / Denied: Allows/Blocks the devices.
●● Delete: Deletes the devices from the list.
NN This function only deletes the name of the
device from the list. If the deleted device
is turned on or tries to connect to the TV,
it may appear on the list again.
To play the media contents of the devices
connected to DLNA function, follow these steps:
1.On the AllShare Play screen, select desired
menu (Videos, Photos, Music).
2.Select DLNA. The TV displays the file list
of the connected device using the DLNA
function.
3.Select the desired file in the file list. The
selected file will play.
Playing the media contents saved on the devices
1.Connect the mobile phone or other
devices which support AllShare Play
function, and then play the media
contents of each device. The popup
screen appears on the bottom of your TV.
2.Select the Allow to accept the connected
devices. The media contents of the
devices can be playing on your TV.
NN You can find the allowed devices on
the AllShare Settings.
NN An alarm window appears informing you
that media contents (videos, photos,
music) sent from a mobile phone will be
displayed on your TV. The contents are
played automatically 3 seconds after the
alarm window appears.
–– If you close the alarm window using
your remote when the alarm window
appears, the media contents are not
played.
NN The first time a device accesses your TV
through the media function, a warning
pop up window appears. Select Allow.
This permits the phone to access the TV
freely and use the Media function to play
content.
NN To turn off media contents transmissions
from a mobile phone, set a device to
Denied in the AllShare Settings.
NN Contents may not play on your TV
depending on their resolution and format.
NN The some buttons may not work
depending on the type of media content.
NN Using the mobile device, you can control
the media play. For details, refer to each
mobile’s user’s guide.
Using the MHL function
You can enjoy videos, photos and music files
on your TV when connecting it with a mobile
device that supports Mobile High-Definition
Link (MHL) function.
NN To use the MHL function, you need
an MHL-certified mobile device. You
can check if your mobile device is MHL
certified on the device manufacturer's
website. To find a list of MHL-certified
devices, visit the official MHL website
(http://www.mhlconsortium.org).
To use the MHL function, follow these steps:
1.With an MHL cable, connect the USB port
of the mobile device and the HDMI IN 3
(MHL) port of the TV.
NN You can also connect the HDTV
adapter.
2.Select Source using your remote. The
Source screen appears.
3.Select HDMI3.
NN To use the MHL function, you must
upgrade the software to the latest
version.
NN When you use a MHL cable, only the
HDMI IN 3 (MHL) port of the TV supports
the MHL function.
NN This product is officially MHL-certified. If
you encounter any problem when using
the MHL function, please contact the
manufacturer of the mobile device.
NN Some mobile devices (products) may
not support the function depending on
the performance or the function of the
device.
NN Since the TV screen is wider than the
mobile device screen, the visual quality
may seem degraded.
NN When you use a MHL cable, you can
charge the connected mobile device even
if the TV is in standby state.
NN The TV remote control supports the
following buttons:
for Standard Remote Control
u / d / l / r (Menu navigation)
† (REW), … (FF), E (select)
∂ (play), ∑ (pause), (stop)
e (Move to previous menu)
for Smart Touch Control
Menu navigation: Slide your finger in
the Touch Pad from one direction to the
opposite direction.
Press the button in the top center of
Touch Pad. The TV displays these control
functions:
–– † (REW), … (FF), E (select), ∂ (play), ∑
(pause), (stop), e (Move to previous
menu)
Anynet+ (HDMI-CEC)
Menu → System → Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to
control all connected Samsung devices that
support Anynet+ with your Samsung TV’s
remote. The Anynet+ system can be used
only with Samsung devices that have the
Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an
Anynet+ logo on it.
NN You can only control Anynet+ devices
using the TV’s remote control, not the
buttons on the TV.
NN The TV remote control may not work
under certain conditions. If this occurs,
reselect the Anynet+ device.
NN The Anynet+ functions do not operate
with other manufacturers’ products.
NN For instructions explaining how to
connect Anynet+ external devices, refer
to the device’s user manual. You must
connect an Anynet+ device using an HDMI
cable. Some HDMI cables may not support
Anynet+ functions.
NN Anynet+ works when the AV device
supporting Anynet+ is in the standby or
on status.
NN Anynet+ supports up to 12 AV devices in
total. Note that you can connect up to 3
devices of the same type.
NN However, you can connect only one
Anynet+ Home Theater. To connect an
Anynet+ Home Theater, connect the
Home Theater to the TV using an HDMI
cable then:
–– To hear sound from the Home
Theater’s front, left and right speakers
and the subwoofer only, connect
a digital optical cable between the
DIGITAL AUDIO OUT (OPTICAL) port
on your TV and the Digital Audio Input
on the Home Theater.
–– To hear 5.1 channel audio, connect
HDMI cables to your Anynet+ DVD
player, satellite box, etc. Then, connect
the DIGITAL AUDIO OUT (OPTICAL)
port on your DVD player, Satellite
Box, etc. (i.e. Anynet + Device 1 or 2)
directly to the Home Theater, not the
TV.
Anynet+ (HDMI-CEC) Menu
The Anynet+ menu changes depending on
the type and status of the Anynet+ devices
connected to the TV.
●● View TV
Changes Anynet+ mode to TV broadcast
mode.
●● Device List
Shows the Anynet+ device list.
●● (device_name) Menu
Shows the menu of the connected device
menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will
appear.
●● (device_name) Tools
Shows the tools menu of the connected
device. E.g. if a DVD player is connected,
the tools menu of the DVD player will
appear.
NN Depending on the device, this menu
may not be available.
●● (device_name) Title Menu
Shows the title menu of the disc in the
connected device. E.g. If a DVD player is
connected, the title menu of the movie in
the DVD player will appear.
NN Depending on the device, this menu
may not be available.
●● Receiver
Sound is played through the receiver.
Setting up Anynet+ (HDMI-CEC)
●● Anynet+ (HDMI-CEC)
To use the Anynet+ Function, Anynet+
(HDMI-CEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function
is disabled, all the Anynet+ related
operations are deactivated
●● Auto Turn Off
Set an Anynet+ Device to turn off
automatically when the TV is turned off.
NN If the Auto Turn Off is set to Yes, running
external devices will turn off at the same
time as the TV powers off.
NN May not be enabled depending on the
device.
●● Receiver
You can listen to sound through a receiver
(i.e. Home Theater) instead of the TV
Speaker.
Switching between Anynet+ Devices
1.Open the Tools menu using your remote,
and then select Anynet+ (HDMI-CEC).
2.Select Device List. The Device List screen
appears.
NN If you cannot find a device you want,
select Refresh to refresh the list.
3.Select a device, and then wait until switch
to the selected device.
NN The Device List menu appears only
when you set Anynet+ (HDMI-CEC) to
On in the System menu.
NN Switching to the selected device may
take up to 2 minutes. You cannot
cancel the switching operation while
switching is in progress.
NN If you have selected an Anynet+
device using Source function and then
selecting its input source, you cannot
use the Anynet+ function. Make sure
to switch to an Anynet+ device by
using the Device List.
Listening through a Receiver
You can listen to sound through a receiver
(i.e. Home Theater) instead of the TV
Speaker. To listen to sound through a
receiver, go to Receiver screen (System →
Anynet+ (HDMI-CEC) → Receiver). Then
select Receiver and set to On.
NN If your receiver supports audio only, it
may not appear in the device list.
NN The receiver will work when you have
properly connected the optical in jack of
the receiver to the DIGITAL AUDIO OUT
(OPTICAL) port of the TV.
NN When the receiver (i.e. Home Theater)
is set to On, you can hear sound output
from the TV’s Optical jack. When the TV
is displaying a DTV (air) signal, the TV
will send out 5.1 channel sound to the
receiver. When the source is a digital
component such as a DVD player and
it is connected to the TV via HDMI, you
will hear only 2 channel sound from the
receiver.
Using the ARC function
You can listen to sound through a receiver
connected using an HDMI cable without
connecting a separate optical cable. To listen
to sound through a receiver using the ARC
function, go to Receiver screen (System →
Anynet+ (HDMI-CEC) → Receiver). Then
select Receiver and set to On.
NN To use the ARC function, a receiver which
supports the HDMI-CEC and ARC features
must be connected to the HDMI IN 2
(ARC) port.
NN To disable the ARC function, set the
Receiver to Off. Even if the TV transmits
the ARC signal continuously, the receiver
will be blocked from receiving the signal.
Troubleshooting
NN To view a list of all troubleshooting items, go
to e-Manual home screen (Menu → Support →
e-Manual → Other Information) or press the
SUPPORT button, and then search a desired
item by selecting a chapter.
Menu → Support → Self Diagnosis → Troubleshooting
If the TV seems to have a problem, first
review this list of possible problems and
solution. Also review the Troubleshooting
Section in the e-Manual. If none of the
troubleshooting tips apply, visit www.
samsung.com/support or call Samsung
customer Service at 1-800-SAMSUNG (1800-726-7864).
SMART Interaction
When you use a SMART Interaction function,
check whether the corresponding menu
turned on. (Menu → System → Voice and
Motion Control)
ŒŒ Voice Control function can be affected
recognition by unclear pronunciation,
voice level, or surrounding noise. For
accurate voice recognition, refer to the
Standard Voice Command list at the
Samsung web site (www.samsung.com →
support → Manuals & Downloads).
ŒŒ Voice Control performance may vary
depending on the language.
ŒŒ Motion Control function can be affected
recognition by brightness of room
and brightness of recognized face.
Alternatively, recognition rate of Motion
Control may differ depending on the TV
camera's angle or the operating speed.
Therefore, we recommend to adjust an
ambient brightness and TV camera's angle
before using Motion Control.
ŒŒ If you have other questions, visit www.
samsung.com/support or call Samsung
customer Service at 1-800-SAMSUNG (1800-726-7864).
Flickering and Dimming
If your Samsung Television is flickering or
dimming sporadically, you may need to
disable some of its energy efficient features
such as the Eco Sensor or the Energy Saving
feature. Follow the steps below with your
remote to turn these features off or on.
ŒŒ Energy Saving: System → Eco Solution →
Energy Saving
ŒŒ Eco Sensor: System → Eco Solution →
Eco Sensor
Component Connections / Screen Color
If you find that the color on your Samsung
television’s screen is not correct or black and
white, first run a Self Diagnosis on the TV to
make sure there are no device issues.
ŒŒ Self Diagnosis : Support → Self Diagnosis
→ Picture Test
If the problem does not appear in the Picture
test, make sure:
ŒŒ Your connections are all consistent. For
example, if you’ve used the AV In jack on
your TV, make sure you have used the AV
Out jack on your video source.
ŒŒ You have connected to your devices to
the correct jacks. For example, if you use
the Component jacks, labeled Pb, Pr, and
Y, to connect your TV and video source,
make sure you have connected the blue
Pb jack on the video source to the blue
Pb jack on the TV, the red Pr jack on the
source to the red Pr jack on the TV.
Screen Brightness
If you find that the colors on your Samsung
TV are correct but just a little too dark or
bright, try adjusting the following settings in
the Picture option in the Main menu:
ŒŒ Backlight for LED TV / Cell Light for PDP TV
, Contrast, Brightness, Sharpness, Color,
Tint (G/R) and so on. Go in to Picture on
user Menu then try adjusting options
mentioned above.
Blur
If you find that there is a blur or “ghostlike”
appearance to the images on your
television’s screen, you might be able to
correct the blurring using Auto Motion Plus.
●● Auto Motion Plus: Picture → Picture
Options → Auto Motion Plus
Unwanted Powering Off
If your Samsung TV appears to turn off by
itself, there may be an issue with either your
Timer settings or your Eco friendly No Signal
Power Off feature.
First make sure Sleep Timer is not
accidentally set. The Sleep Timer turns off
the TV automatically after a certain period
of time has passed.
ŒŒ Sleep Timer: System → Time → Sleep
Timer
If the Sleep Timer is not activated, you may
have engaged the No Signal Power Off or
Auto Power Off feature.
ŒŒ No Signal Power Off: System → Eco
Solution → No Signal Power Off
ŒŒ Auto Power Off: System → Eco Solution
→ Auto Power Off
Trouble Powering On
Press the power on button on the TV or
remote and the light should blink about 5
times before the TV turns on.
If you find that you are having trouble
powering on your Samsung television, there
are a number of things to check before
making a call to the service department.
If you’re sure your power cord, remote
control, and PC are functioning properly,
you may be having a cable issue. If you have
a cable or satellite box, your TV may appear
to be off because the cable or satellite box
is not outputting a signal. To test the signal
output of your cable or satellite box, press
the guide or info button on the cable or
satellite box remote control. If the screen
displays the guide or info data, the problem
is caused by the box.
Stand Assembly
If you have any trouble assembling the stand,
visit www.samsung.com/spsn.
Cannot Find a Channel
Re-run Setup (Go to System → Setup) or
run Auto Program. (Go to Channel → Auto
Program).
NN Watch these troubleshooting on video at
www.samsung.com/spsn
Picture (Troubleshooting)
First, perform the Picture Test and to see if
your TV is properly displaying the test image
(go to Support → Self Diagnosis → Picture
Test).
If the test image is properly displayed, the
poor picture may be caused by the source or
signal.
The TV image does not look as good as it did in
the store.
Store displays are all tuned to digital, HD
(high definition) channels.
If you have an analog cable/set top box,
upgrade to a digital set top box. Use HDMI
or Component cables to deliver HD (high
definition) picture quality.
NN Many HD channels are up scaled from SD
(Standard Definition) contents. Look for
a channel that is broadcasting true HD
content.
ŒŒ Cable/Satellite subscribers: Try HD
channels from the channel line up.
ŒŒ Air/Cable Antenna connection: Try
HD channels after performing an Auto
Program.
Adjust the Cable/Sat box video output
resolution to 1080i or 720p.
The picture is distorted: macro block error, small
block, dots, pixelization
The compression of video contents may
cause picture distortion especially in fast
moving pictures such as sports and action
movies.
A weak or bad quality signal can cause picture
distortion. This is not a TV issue.
Mobile phones used close to the TV (within
3.3 ft) may cause noise in the picture on
analog and digital channels.
Color is wrong or missing.
If you’re using a Component connection,
make sure the component cables are
connected to the correct jacks. Incorrect or
loose connections may cause color problems
or a blank screen.
The color is poor or the picture is not bright
enough.
Adjust the Picture options in the TV menu
(go to Picture Mode / Color / Brightness /
Sharpness)
Adjust the Energy Saving option in the TV
menu (go to System → Eco Solution →
Energy Saving)
Try resetting the picture to view the default
picture settings (go to Picture → Reset
Picture).
There is a dotted line on the edge of the screen.
If the Picture Size is set to Screen Fit, change
it to 16:9.
Change the cable/satellite box resolution.
The picture is black and white.
If you are using an AV composite input,
connect the video cable (yellow) to the
Green jack of Component on the TV.
When changing channels, the picture freezes or
is distorted or delayed.
If the TV is connected to a cable box, try
to reset the box. (Disconnect and then
reconnect the AC cord and wait until the
cable box reboots. It may take up to 20
minutes.)
Set the output resolution of the cable box to
1080i or 720p.
Sound (Troubleshooting)
First, perform the Sound Test to determine
if your TV audio is operating properly. (Go to
Support → Self Diagnosis → Sound Test).
If the audio is OK, the sound problem may be
caused by the source or signal.
There is no sound or the sound is too low at
maximum volume.
Please check the volume of the device (Cable/
Sat Box, DVD, Blu-ray etc.) connected to
your TV.
The picture is good but there is no sound.
Set the Speaker Select option to TV Speaker
in the Sound menu.
If you are using an external device, check
the device’s audio output option. (Ex.
You may need to change your cable box’s
audio option to HDMI if you have the box
connected to your TV using an HDMI cable.)
If you are using a DVI to HDMI cable, a
separate audio cable is required.
If your TV has a headphone jack, make sure
there is nothing plugged into it.
Reboot the connected device by
disconnecting, and then reconnecting
device’s power cable.
The speakers are making an inappropriate noise.
Check cable connections. Make sure a video
cable is not connected to an audio input.
For antenna or cable connections, check the
signal information. A low signal level may
cause sound distortion.
Perform the Sound Test feature. (Support →
Self Diagnosis → Sound Test)
RF (Cable / Antenna) Connection (Troubleshooting)
The TV is not receiving all channels.
Make sure the coaxial cable is connected
securely.
Run Auto Program to add available channels
to the channel list. Go to Channel → Auto
Program then select Cable and make sure to
select the correct Cable TV signal type. There
are 3 options, STD, HRC and IRC. Most cable
systems use STD.
Verify the antenna is positioned correctly.
No caption on digital channels.
Check the Caption Setup menu. Try changing
Caption Mode Service1 to CC1.
Some channels may not have caption data.
The picture is distorted: macro block error, small
block, dots, pixelization.
The compression of video contents may
cause picture distortion, especially with fast
moving pictures such as sports and action
movies.
A weak signal can cause picture distortion.
This is not a TV problem.
PC Connection (Troubleshooting)
A Mode Not Supported message appears.
Set your PC’s output resolution so it matches
a resolution supported by the TV.
The video is OK but there is no audio.
If you are using an HDMI connection, check
the audio output setting on your PC.
Network Connection (Troubleshooting)
The wireless network connection failed.
Make sure the TV is connected to a wireless
IP sharer (router).
Software Update over the network fails.
Run Network Status in Network menu to
confirm the connection.
If you have latest Software (SW) version, SW
upgrade will not proceed.
Others (Troubleshooting)
Purple/green rolling horizontal bars and buzzing
noise from the TV speakers with a Component
cable connection.
Remove the left and right audio connections
from the Set-Top box. If the buzzing stops,
this indicates that the Set-Top box has a
grounding issue. Replace the Component
video cables with an HDMI connection.
The picture won’t display in full screen.
HD channels will have black bars on either
side of the screen when displaying up scaled
SD (4:3) contents.
Black bars will appear on the top and bottom
of the screen when you watch movies that
have aspect ratios different from your TV.
Adjust the picture size options on your
external device or the TV to full screen.
A Mode Not Supported message appears.
Check the supported resolution of the TV,
and adjust the external device’s output
resolution accordingly. Refer to the
resolution settings on User manual.
Caption on TV menu is grayed out.
You cannot select the Caption menu if you
have selected a source connected to the TV
via HDMI or Component.
The external device’s Caption function must
also be activated.
There is a plastic smell from the TV.
This smell is normal and will dissipate over
time.
The TV Signal Information is unavailable in the
Self Diagnosis menu.
This function is only available for digital
channels the TV receives from an Antenna /
RF /Coax connection.
The TV is tilted to the side.
Remove the base stand from the TV and
reassemble it.
The channel menu is grayed out (unavailable).
The Channel menu is only available when you
select the TV source.
Your settings are lost after 30 minutes or every
time the TV is turned off.
If the TV is in the Store Demo mode, it will
reset audio and picture settings every 30
minutes. Change the settings from Store
Demo mode to Home Use mode using the
Setup procedure. Select TV in the Source
using your remote, and go to System →
Setup.
You have intermittent loss of audio or video.
Check the cable connections and reconnect
them.
Loss of audio or video can be caused by using
overly rigid or thick cables. Make sure the
cables are flexible enough for long term use.
If mounting the TV to a wall, we recommend
using cables with 90 degree connectors.
You see small particles when you look closely at
the edge of the frame of the TV.
This is part of the product’s design and is not
a defect.
The PIP menu is not available.
PIP functionality is only available when you
are using an HDMI, or Component source.
POP (TV’s internal banner ad) appears on the
screen.
Select Home Use under Setup mode. For
details, refer to the Setup Feature.
Plasma TV is making humming noise.
Plasma TVs typically make a soft
humming sound. This is normal. It’s caused
by the electrical charges that are used to
create the images on the screen.
for PDP TV
If the humming sound is loud, you may have
set the brightness on the TV too high. Try
setting the brightness lower.
You can also have loud humming if the back
of your Plasma TV is too close to a wall or
other hard surface. Also, try rerouting your
connection cables.
An improperly installed wall mount can also
create excessive noise.
Image Retention (Burn In) Issue.
To minimize the possibility of
screen burn, this unit is equipped with Pixel
Shift screen burn reduction technology.
Pixel Shift lets you set the picture so it moves
slightly up and down (Vertical Line) and side
to side (Horizontal Dot). The regular, slight
movement of the picture reduces screen
for PDP TV
burn in.
3D (Troubleshooting)
The 3D Active Glasses are not working correctly
Make sure the glasses are turned on.
The 3D Active Glasses may not work
properly if there is any other 3D product or
electronic devices turned on near the glasses
or TV.
If there is a problem, keep other electronic
devices as far away as possible from the 3D
Active Glasses.
The 3D images don’t look quite right.
The ideal viewing distance is three times or
more the height of the screen.
We also recommend sitting with viewer’s
eyes on a level with the screen.
The batteries in the 3D glasses don’t last
Turn off 3D glasses while not using them. If
you leave 3D glasses on, battery lifespan is
shortened.
Anynet+ (HDMI-CEC) (Troubleshooting)
Anynet+ does not work.
Check if the device is an Anynet+ device. The
Anynet+ system supports Anynet+ devices
only.
You can connect only one receiver (home
theater).
Check if the Anynet+ device power cord is
properly connected.
Check the Anynet+ device’s Video/Audio/
HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set
to On in the Anynet+ setup menu.
Check whether the TV remote control is in
TV mode.
Check whether the remote control is
Anynet+ compatible.
Anynet+ doesn’t work in certain situations.
(Searching channels, operating Smart Hub or
Setup, etc.)
If you have removed and then reconnected
the HDMI cable, please make sure to search
devices again or turn your TV off and on
again.
I want to start Anynet+.
Check if the Anynet+ device is properly
connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On. (System →
Anynet+ (HDMI-CEC))
Open the Tools menu using your remote
and then select Anynet+ (HDMI-CEC). Then
select a menu you want.
I want to exit Anynet+.
Select View TV in the Anynet+ menu.
Go to Source screen using your remote and
select a non-Anynet+ device.
The message Connecting to Anynet+ device ...
appears on the screen.
You cannot use the remote control when
you are configuring Anynet+ or switching to
a view mode.
Use the remote control after the TV has
completed Anynet+ configuration or has
finished switching to Anynet+.
The Anynet+ device does not play.
You cannot use the play function when
Setup is in progress.
The connected device is not displayed.
Check whether or not the device supports
Anynet+ functions.
Check whether or not the HDMI cable is
properly connected.
Check whether Anynet+ (HDMI-CEC) is set to
On. (System → Anynet+ (HDMI-CEC))
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make
sure the device is connected to your TV with
an HDMI cable.
Some HDMI cables may not support Anynet+
functions.
If the connection is terminated because
there has been a power failure or the HDMI
cable has been disconnected, please repeat
the device scan.
The TV sound is not output through the receiver.
Connect the optical cable between TV and
the receiver.
The ARC function enables digital output
of sound using the HDMI IN 2(ARC) port
and can only be operated when the TV
is connected to an audio receiver that
supports the ARC function.
AllShare Play (Troubleshooting)
This file may not be playable properly.
This may appear because of high bit rate of
content. Content generally will play but could
experience some playability issue.
Smart Hub (Troubleshooting)
Some application contents only appear in
English. How can I change the language?
The Application content language may be
different from the application user interface
language.
The ability to change the language depends
on the service provider.
Some application services do not work.
Check with the service provider.
Refer to the help website for application
service provider information.
When a network error occurs, I can only use the
setting menu.
If network connection doesn’t work, your
service might be limited, as all functions
except the setting menu are needed to
connect to the internet.
Web Browser (Troubleshooting)
1.To open Web Browser, select Web
Browser in the Smart Hub. The Web
Browser may be displayed differently with
PC.
2.The Web Browser is not compatible with
a Java application.
3.When attempted to download a file, but
the file could not be saved and an error
message appeared.
4.Access may be blocked to some websites
or to web browsers operated by certain
businesses.
5.Playback of Flash video may be restricted.
6.E-commerce, for purchasing products
online, is not supported.
7.Scrolling a web page that allows only part
(and not the whole) of the page to be
scrolled may cause corrupted characters.
8.ActiveX is not supported.
9.Some options cannot be accessed in Tab
mode. (To access such options, switch to
Pointer mode.)
10.Some text may appear corrupted because
the number of supported fonts is limited.
11.The response to a command on the
remote or the screen display may be
delayed temporarily if a web page is
currently loading.
12.The loading of a web page may delay or
stop with some operating systems.
13.Copy and Paste are not supported.
14.When writing emails or posting messages,
some functions (Such as changing the size
or colors.) may not be supported.
15.The number of bookmarks and logs that
can be saved is limited.
16.The maximum number of windows that
can open at the same time may vary
depending on the browsing condition or
TV model.
17.The web browsing speed depends on the
network conditions.
18.PIP will automatically be deactivated if
a video is played in the browser. Videos
may not commence playback after PIP
interruption and a possible refresh for the
page may be required.
19.The Web Browser can play MP3 audio
files only.
20.The function for importing or
exporting bookmarks is compatible with
bookmark files in a particular file format
only. (Compatible format: Netscapebookmarkfile- 1)
21.When you import or export the bookmark,
the folder tree is not included.
22.If you import the bookmark file to a
Computer from a TV, the bookmark
file will be saved in “Samsung SmartTV
Bookmark” folder.
23.If the time is not set in the menu (System
→ Time → Clock), the history information
may not be saved.
24.Visited web site history is saved in
chronological order and It will be removed
from the list according to oldest page
accessed.
25.Some video or audio content may not play
during Flash playback depending on the
video/audio codec supported.
26.A sudden change in the picture brightness
inside the video window may affect the
brightness of the surrounding stationary
picture. for PDP TV
27.If you use QWERTY keyboard screen when
you use Web Browser with PIP function,
the PIP function turns off automatically
except inputting a URL address.
Using the Smart Touch Control
for LED 7500 series and above, PDP 8000 series
Improved user convenience has been provided so that
you can switch the channel and adjust the volume with
just your fingertips while focusing on the TV screen. In
addition, the built-in touch pad removes the need for a
mouse when you change the menu settings and search
for something on the Internet.
Smart Touch Control at a Glance
●● P: Turns the TV on and off.
●● w / v: Adjusts the Volume.
●● < / >: Changes channels.
●● RETURNR: Returns to the previous menu.
●● VOICE˜: Lets you access the Voice Control
function. When you press the button, the
TV displays the command list. You can speak
using the microphone embedded in your
remote.
NN For more detailed information about
the Voice Control function, see "SMART
Interaction" in the e-manual.
●● NUMBERš: Displays the Number button
screen. You can select a number using the
Touch Pad.
●● ™: Brings up the Smart Hub applications.
See e-Manual chapter Advanced Features
→ Smart Hub. To exit an application that is
running easily, press the ™ button.
NN If you don’t press any button within 30
seconds, the Smart Touch Control is set to
Sleep mode automatically. To wake up the
Smart Touch Control, press the Touch Pad.
Initial Pairing
After you have run the Initial Setup on your
TV, you should connect your Smart Touch
Control to your TV.
1.Point the Smart Touch Control toward
the TV's IR Blaster and press any key on
the Smart Touch Control.
2.The connection icon appears at the
bottom left of the screen and the Smart
Touch Control is automatically connected
to the TV.
NN If you want to perform the pairing
process again, press the reset button in
the center of the back cover using a pin or
the tip of an unbent paper clip. The Smart
Touch Control will be initialized.
Smart Touch Control PAIRING Reset
button.
Calibrating the Touch Pad
To calibrate the touch pad on the Smart
Touch Control, follow these steps:
1.Press the NUMBERš button for 3
seconds. The calibration starts.
2.When done, all the LEDs on the top of
the Smart Touch Control blink twice
simultaneously.
NN While calibrating, don't touch the touch
pad.
NN If the touch pad looses accuracy, re-
calibrate the touch pad by repeating
Steps 1 and 2.
Using the Touch Pad
To display the shortcut functions list on the bottom of
the screen, press the ‹ button at the bottom of the
touch pad. This list includes Menu, Source, CH List, 3D,
Support, and a number of other functions.
To display the color and playing control functions on
the top of the screen, press the button on the top of
the touch pad.
●● To Move the Highlight
Rest your finger on the touch pad, and then
slide it from one side to the other, from top
to bottom, or bottom to top.
NN To move the Highlight continuously, flick
your finger across the touch pad from
right to left, left to right, top to bottom,
or bottom to top.
●● To Select an item
Press the Touch Pad.
●● Open the History screen.
Press the Š button in the left of the Touch
Pad. Displays a list of recently used functions.
You can select a function again using the
Touch Pad easily and quickly.
●● Open the Tools menu.
Press the T button in the right of the Touch
Pad. Quickly select frequently used functions.
●● Open the color, playing control and exit
buttons.
To display the color, exit and play control
buttons at the top of the screen, press the
∏∏∏∏ button at the top of the touch pad.
e: Close all menus shown on the screen.
●● Open the shortcut functions screen.
Press the ‹ button in the bottom center
of the Touch Pad. Quickly select frequently
used functions:
●● Using the Scroll mode
If you press and hold the Touch Pad when
using Web Browser, the Touch Pad switches
to the Scroll mode.
In the Scroll mode, slide your finger in the
Touch Pad from one side to the other, the
highlight moves page units.
NN To return to the general mode of the
Touch Pad, press the Touch Pad or
RETURNR button on your Smart Touch
Control.
To Enter a channel number through Smart
Touch Control
1.While watching a broadcast, press the
NUMBERš button on the Smart Touch
Control. The TV displays the number
button screen.
2.Using the touch pad, highlight a number,
and then press the touch pad. The TV
displays a list of channels that start with
the number you selected.
3.Using the touch pad, highlight the channel
in the list you want, and then press the
touch pad.
NN You can also change the channel by
touching the up or down channel icon on
the touch pad. If you touch the touch pad
immediately after, the TV displays the list
of memorized channels. Select a channel
by moving or flicking your finger up or
down, and then pressing the touch pad.
NN If you change a channel by entering the
channel number, that channel number is
memorized and added to the Added Ch.
list automatically. You can change the
channels using a memorized channel list
easily and quickly.
Using the Smart Touch Control with IR Blaster
When you connect an IR Blaster with your TV,
you can control connected external devices
with your TV using the Smart Touch Control.
IR Blaster Pairing
1.Turn the IR Blaster on, and if the LED
blinks, connect the IR Blaster to the TV.
2.Briefly point the IR Blaster toward the IR
sensor of the TV and press the PAIRING
button at the bottom.
3.The connection icons appear on the
bottom left of the screen, and the TV
connects to IR Blaster automatically.
NN If the connection process failed, please
turn off and on the IR Blaster, try again
from step 2.
Precautions for Using an IR Blaster
NN To use an IR Blaster, the IR Blaster must
be located nearby with external devices
connected to the TV.
NN Note that it should be no obstacle
between the external device's IR receiver
and an IR Blaster.
NN Install the IR Blaster within 50 cm and 45
degrees of the up, down, left and right
directions of the IR sensor of the external
device.
Setting up Universal Remote Control
Lets you control a Set-Top Box (STB) or
a BD player or both connected to the TV
using your Smart Touch Control. After you
connect the device to the TV, the Smart
Touch Control can control the navigation,
number, and other keys needed to operate
and control the device.
To connect the external device to your
Smart Touch Control, follow these steps:
1.When you connect IR Blaster for the first
time, a pop-up appears. Select Yes to set
IR Blaster and Smart Touch Control, and
then press the touch pad.
2.To reset IR Blaster and Smart Touch
Control, press the ‹ button on Smart
Touch Control, and then select Set Up
Universal Remote.
3.Select Set up a device to control, and then
press the touch pad.
4.Select an external device from the
connected devices, and then press the
touch pad.
5.Select the port used to connect the
external device, and then press the touch
pad.
NN Make sure that the selected device is
on. If it is turned off, turn the power
on and press Refresh.
6.Select Search brands, and then press
the Touch Pad. A keyboard and an entry
field appear. Enter the first few letters
of the brand name of your device using
the Smart Touch Control, and then select
Done at the bottom of the keyboard. In
the list that appears below the entry field,
select the brand name of your device, and
then press the touch pad.
NN If you want to search the brand of STB
(Set-Top box), you can search the STB
by using the brand name or a cable
provider.
7.Select Search Model, and then press
the touch pad. A keyboard and an entry
field appear. Enter the first few letters
and numbers of the model name of your
device using the Smart Touch Control,
and then select Done at the bottom of the
keyboard. In the list that appears below
the entry field, select the model name of
your device, and then press the touch
pad.
NN If the search for model name does not
work properly, search with a part of
the model name or use the Search for
recommended model code.
8.Select Download, and then press the
touch pad. Download the configuration
data for the IR Blaster in the same way.
9.When all the settings are complete, select
the Complete button and press the touch
pad.
NN When you use the BD home theater by
using Universal Remote, some buttons
may not be supported. In this case, we
recommend to use Anynet+ (HDMI-CEC)
function.
Using the Search for Recommended Model Code
1.In the Search Model step in the integrated
remote control setup, select the
Recommended and press the touch pad.
2.Select Download to download the
recommended model code.
3.Point the Smart Touch Control forward
to the TV's IR sensor and press the touch
pad to test if the device works.
4.If the downloaded recommended model
code does not work, repeat the steps
from step 3.
LED Indicator Status
●● Watch TV (TV + STB)
You can control the TV and Set-Top box
using universal remote for viewing the SetTop box. (e.g. Volume button: Adjust the TV
volume. / Channel button: Change the STB
channels.)
●● Watch Movie (TV + BD Player)
You can control the TV and BD player using
universal remote for viewing the BD player.
(e.g. Volume button: Adjust the TV volume. /
TOOLS button: Open the BD players option
menu.)
●● TV
You can only control the TV using universal
remote.
Supported Subtitle and AllShare Play file
formats
Subtitle
External
–– MPEG-4 timed text (.ttxt)
–– SAMI (.smi)
–– SubRip (.srt)
–– SubViewer (.sub)
–– Micro DVD (.sub or .txt)
–– SubStation Alpha (.ssa)
–– Advanced SubStation Alpha (.ass)
–– Powerdivx (.psb)
Internal
–– Xsub
Container: AVI
–– SubStation Alpha
Container: MKV
–– Advanced SubStation Alpha
Container: MKV
–– SubRip
Container: MKV
–– MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg
JPG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
Supported music file formats
File Extension
Type
Codec
Comments
*.mp3
MP3
MPEG1 Audio Layer 3
*.m4a
*.mpa
*.aac
*.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
The Seek (jump) function is not
supported.
Supports up to 2 channel
*.ogg
OGG
Vorbis
Supports up to 2 channel
*.wma
WMA
WMA
WMA 10 Pro supports up to 5.1
channel. WMA lossless audio is not
supported.
Video Codec
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
DIVX 3.11/4.x/5.x/6.1
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.m2ts
*.mts
*.divx
MPEG4 SP/ASP
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
H.264 BP/MP/HP
Motion JPEG
Window Media Video
v9
30
6 – 30
MPEG2
MPEG1
VP6
640 x 480
4
SVAF
MVC
*.webm
1920 x 1080
WebM
VP8
AC3
LPCM
ADMPCM(IMA,
MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
DRA
30
1920 x 1080
24 / 25 / 30
40
6 – 30
8
Vorbis
Other Restriction
NN Video content will not play, or not play
correctly, if there is an error in the
content or the container.
NN Sound or video may not work if the
contents have a standard bit rate/frame
rate above the compatible Frame/sec
listed in the table above.
NN If the Index Table is in error, the Seek
(Jump) function is not supported.
NN When you play video over a network
connection, the video may not be played
smoothly.
NN The menu may take longer to appear if
the video’s bit rate exceeds 10Mbps.
NN Some USB/digital camera devices may not
be compatible with the player.
Video decoder
●● Supports up to H.264, Level 4.1
●● H.264 FMO / ASO / RS, VC1 SP / MP / AP L4
and AVCHD are not supported.
●● For all Video codecs except MVC, VP8, VP6:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
–– GMC 2 over is not supported.
●● Supports only SVAF Top/Bottom and Side by
Side.
●● Supports only BD MVC Spec.
Audio decoder
●● WMA 10 Pro supports up to 5.1 channel.
WMA lossless audio is not supported.
●● RealAudio 10 lossless is not supported.
●● QCELP, AMR NB/WB are not supported.
●● If Vorbis is only in Webm container, supports
up to 2 channel.
Anti-theft Kensington Lock
<TV Rear>
1
<Optional>
A Kensington Lock is a device you can use to
physically fix your TV in place when using it
in a public place.
You wrap the Kensington Lock’s cable
around a large, immobile object and then
attach the lock to the Kensington slot on the
back of the TV.
The appearance and locking method may
differ from the illustration below depending
on the manufacturer. Refer to the manual
provided with the Kensington Lock for
additional information on proper use. The
Kensington Lock is not supplied by Samsung.
NN Please find a “K” icon on the rear of the
TV. The Kensington slot is beside the “K”
icon.
To lock the product, follow these steps:
1.Wrap the Kensington Lock cable around
a large, stationary object such as desk or
chair.
2.Slide the end of the cable with the lock
attached through the looped end of the
Kensington Lock cable.
3.Insert the locking device into the
Kensington slot on the product.
4.Lock the lock.
NN These are general instructions. For exact
instructions, see the User manual supplied
with the locking device.
NN The locking device has to be purchased
separately.
NN The location of the Kensington slot may
be different depending on the TV model.
Licenses
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
7,519,274
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, and DTS and the Symbol together are registered
trademarks of DTS, Inc. © 2011 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the
product menu.
Open Source License Notice is written only English.
Download PDF

advertising