Ip~42p(DSI860)-SEA 9/15/04 2:49 PM Page 3

Ip~42p(DSI860)-SEA
9/15/04
2:49
PM
Page
3
struc
I
Jl
Warnings
Note
LASSE 1 LASER PRODUKT
UOKAN 1 LASER LAITE
LASS I LASER APPARAT
LASS 1 LASER PRODUCT
I
RODUCTO LASER CLASE I
to CATV
system
installer
:
This reminder
is provided
to call the CATV system
installer's attention
to Section 820-40 of the NEC
which provides
guidelines
for proper grounding
and,
in particular,
specifies that the cable ground shall be
I
connected
to the grounding
system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
CAUTION:
TO REDUCE THE RiSK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS iNSiDE.
REFER SERViCiNG TO QUALiFiED
SERVICE PERSONNEL.
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM,
/_
Thisunit.
symbol indicates that dangerous voltage which can cause electric shock is present inside
this
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
recautions
S
S
S
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontatly_on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player_ ensure the disc tray is empty. This player is designed for continuous use. Switching oft the DVD player to
the stand-by mode does not disconnect the electrical supply, tn order to disconnect the player completely from the power supply_
remove the main plug from the wall outlet, especially when left unused for a long period of time.
J)j
l;/
/ f//
I II
I II
II I
II
During thunderstorms_ disconnect AC main plug from the
wail outlet.
Do not expose the unit to direct sunlight or other heat
sources.
Voltage peaks due to lightning could damage the unit.
This could lead to overheating and malfunction of the unit.
Protectthe playerfrom moisture(i.evases), and excess
heat(e.g.fireplace)or equipmentcreatingstrongmagneticor electric
fields(i.e.speakers...).Disconnectthe powercablefrom theAC supplyif
the playermalfunctions.Your playeris notintendedfor industrialuse.
The battery used with this product contain chemicals that
Useofthis productis for personaluseonly.
Condensationmayoccur if yourplayeror dischave beenstoredin cold
temperatures
Iftransportingthe playerduringthe winter,waitapproximately2 hours
until theunit has reachedroomtemperaturebeforeusing.
are harmful to the environment.
Do not dispose of batteries in the general household trash.
Instructions
READ
INSTRUCTIONS
All the safety
read before
RETAIN
CLEANING
and operating
instructions
the appliance
should
be
Unplug
is operated.
this video
before
INSTRUCTIONS
should
be
For added
receiver
on the appliance
and in the operating
should be adhered to.
AND
kitchen
be
product
near a bathtub,
sink, or laundry
or near a swimming
OBJECT
near waterwash
bowl,
Never
tub, in a wet basement,
pool, and the like.
wall outlets
and extension
cords
as
for ventilation
video product
in the cabinet
and to ensure
and to protect
openings
should
the video
similar
should never
heat register.
are provided
reliable operation
of the
it from overheating
must not be blocked
The openings
other
never
product
surface.
be placed
or covered.
product
near or over a radiator
voltage
or short-out
parts
shock.
spill liquid of any kind on the video
Do not place
this video
stand,
bracket,
tripod,
The video
product
ventilation
instructions
is provided
have been
or table
Power-supply
cords should be routed so that
they are not likely to be walked on or pinched
by items placed
upon
attention
or against
them paying
to cords at plugs,
receptacles,
the appliance.
and the point where
on an unstable
may fall, causing
cart,
serious
injury to
damage
or
stand, tripod,
recommended
instructions
bracket,
by the manufacturer,
or sold with the video
product.
Any mounting
should follow the manufacturer's
and should
recommended
use a mounting
accessory
by the manufacturer.
CART
and cart combination
with care. Quick
PROTECTION
product
or table.
and serious
Use only with a cart,
An appliance
CORD
they exit from
as they may touch
points
result in a fire or electric
of the appliance
followed.
convenience
of any kind into this
to the appliance.
on a bed, sofa, rug, or
This video
or rack unless proper
or the manufacturer's
particular
ENTRY
openings
a child or adult,
be blocked
This video product should not be placed
in a built-in installation
such as a bookcase
POWER
product
surges.
ACCESSORIES
and openings
by placing
system.
product.
VENTILATION
these
Never
or cable
to the video
LIQUID
through
that could
this can result in the risk of fire
or electric shock.
Slots
AND
dangerous
for long
and power-line
push objects
product
OVERLOADING
Do not overload
damage
due to lightning
or when
it from the wall outlet
the antenna
This will prevent
MOISTURE
Do not use this video
forexample,
should
product
storm,
and unused
of time, unplug
and disconnect
and use instructions
of this video
a lightning
it is left unattended
INSTRUCTIONS
WATER
protection
during
periods
FOLLOW
Use a damp cloth for cleaning.
LIGHTNING
HEED WARNINGS
All operating
followed.
from the wall outlet
Do not use liquid cleaners
or aerosol cleaners.
The safety and operating
instructions
retained for future reference.
All warnings
instructions
product
cleaning.
surfaces
stops,
may cause
combination
POWER
force,
the appliance
be moved
and uneven
and cart
to overturn.
SOURCES
This video
product
type of power
should
source
on the marking
appliance
dealer
For video
to the operating
only from the
If you are not sure
to your home,
or local power
products
power,
be operated
indicated
label.
of the type of supply
battery
should
excessive
intended
or other
to be operated
sources,
instructions.
consult
your
company.
refer
from
POWER
LINES
Anoutside
antenna
system
should
notbelocated
in
thevicinityofoverhead
powerlinesorotherelectric
lightorpowercircuits,
orwhereitcanfallintosuchpowerlines
orcircuits.
Wheninstalling
anoutside
antenna
system,
extreme
careshould
betakentokeepfrom
touching
suchpowerlinesorcircuits
ascontact
with
themmightbefatal.
POLARIZATION
Thisvideoproduct
isequipped
witha polarized
alternating
current
lineplug(aplughaving
oneblade
widerthantheother.)
Thisplugwillfitintothepower
outletonlyoneway.
Thisisasafety
feature.
Ifyouareunable
toinsert
theplugfullyintotheoutlet,
tryreversing
the
plug.Iftheplugshould
stillfailtofit,contact
your
electrician
toreplace
yourobsolete
outlet.Donot
defeatthesafety
purpose
ofthepolarized
plug.
OUTDOOR
ANTENNA
GROUNDING
• If an outside
antenna
antenna
terminal,
is grounded
against
is connected
be sure the antenna
so as to provide
voltage
to the
surges
system
static
Code,
provides
information
grounding
810 of the National
technician
has used replacement
specified
ANSI/NFPA
characteristics
to proper
grounding
of the lead-in
discharge
conductors
location
connection
to grounding
requirements
of antenna
for the grounding
See the figure
discharge
electrodes,
unit,
and
electrode.
below.
I}
Do not use attachments
not recommended
manufacturer
as they may
SAFETY
Upon
to service
or removing
you to dangerous
• Refer all servicing
voltage
this product
covers
may expose
or other
to qualified
yourself
service
PS
of any service
product,
perform
safety
product
is in proper
to determine
operating
REQUIRING
this video
product
product
to
condition.
from the wall outlet
to qualified
into the video
technician
that the video
SERVICE
service
personnel
and
under
cord or plug is damaged.
has been spilled,
c. If the video
or water
or repairs
ask the service
checks
or objects
have
product.
has been exposed
to rain
d. If the video product does not operate normally
by following the operating
instructions.
Adjust
only those
work
controls
by a qualified
the video
that are covered
instructions
as an improper
of other controls may result
and will often require extensive
product
product
or the cabinet
• Do not attempt
GROUNDING CONDUCTORS
CHECK
completion
e. If the video
SERVICING
or other
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
adjustment
in damage
by the video product
cause hazards.
shock
O
by the operating
ATTACHMENTS
part. Unauthorized
may result in fire, electric
LEAD iN WIRE
fallen
wire
parts
the same
ANTENNA
b. If liquid
unit, size of grounding
be sure the
or having
as the original
substitutions
hazards.
following conditions.
a. When the power-supply
No. 70-1984,
with respect
by the manufacturer
refer servicing
of the mast and supporting
to an antenna
as opening
parts are required,
service
Unplug
Electrical
structure,
replacement
DAMAGE
charges.
• In the U.S.A section
PARTS
When
to this video
some protection
and built-up
REPLACEMENT
technician
to its normal
to restore
operation.
has been dropped
has been damaged.
f. When the video product
change in performance
a need for service.
exhibits a distinct
- this indicates
hazards.
personnel.
H EAT
This video
sources
(including
unit should
be situated
such as radiators
amplifiers)
that
stoves,
_roduce
away from heat
or other
heat.
products
the
res
Multi-Disc
Playback & AM/FM Tuner
The HT-DS1860 combines the convenience of multi-disc playback capability, including
DVD-VIDEO, DVD-AUDIO, CD, MP3-CD.WMA-CD. CD-R/RW. and DVD-R/RW. with
a sophisticated AM/FM tuner, all in a single player.
DVD-Audio
compatible
Experience the super high-qualityaudio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound
quality in terms of dynamic range, low-level resolution anc high-frequency detail.
'J Dolby Pro Logic II
The HT-DS1860
and darkens the brightness of the TV screen
after 2 minutes in the stop
The HT-DS1860automatically s,_
minutes in the screen saver mode.
.=power saving mode after 20
/i, Power Saving Function
The HT-DS1860 automatically shuts itself off after 20 minutes in the stop mode.
! ii_Customized
TV Screen Display
The HT-DS1860 allows you to select your favorite image during JPEG, DVD playback
and set it as your background wallpaper.
J_Convenient
AV Device Control
Via Anynet
You can conveniently control the DVD Home Theater System and other Samsung AV
devices from your Samsung TV with the remote control via Anynet.
P.SCAN
(progressive
Scan) Function
Unlike regular interlace Scan ,in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines),Progressive Scan uses one field of
information (all lines displayed in one pass ) to create a clear and detailed picture without visible
scan lines,
PREPARATION
Safety Warnings.
.......................................................
1
...........................................
2
Safety Instructions
Features ..............
Notes on Discs .....
Description ..............
..7
.....
.
......
g
.... 13
15
16
17
19
..20
.21
........................................
29
........................................... 30
...........................................
31
..........................................
32
...........................................
33
...........................................
35
4O
41
42
Setting the Language ..........................................................................................................................................................
Setting TV Screen type .......................................................................................................................................................
43
45
Setting Parental Controls (Rating Level) .............................................................................................................................
Setting the Password ..........................................................................................................................................................
Setting the Wallpaper ..........................................................................................................................................................
DVD Playback Mode...........................................................................................................................................................
AV SYNC Setup ..................................................................................................................................................................
Setting the Speaker Mode ..................................................................................................................................................
Setting the Test Tone ..........................................................................................................................................................
Setting the Delay Time........................................................................................................................................................
Setting the Audio Quality ....................................................................................................................................................
Setting the DRC (Dynamic Range Compression) ...............................................................................................................
Sound Field (DSP)/EQ Function .........................................................................................................................................
Dolby Pro Logic Ii Mode......................................................................................................................................................
Dolby Pro Logic II Effect .....................................................................................................................................................
47
49
51
53
54
55
56
57
59
61
62
63
64
O RADIO OPERATION
Listening to Radio ...............................................................................................................................................................
Presetting Stations ..............................................................................................................................................................
65
66
@ MISCELLANEOUS
Convenient Functions .........................................................................................................................................................
Operating a TV with the Remote Control ............................................................................................................................
Before Calling for Service ...................................................................................................................................................
Cautions on Handling and Storing Discs ............................................................................................................................
Specifications ......................................................................................................................................................................
Notes on Terminology .........................................................................................................................................................
67
69
71
73
74
75
on Discs
DVD (Digital
0
VIDEO
Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Disc Type
Mark (Logo)
Recorded
Signals
Disc Size
5"
DVD-AUDIO
DVD-VIDEO
Audio + Video
3 1/2"
AUDUO/WDEO
AUDIO-CD
Approx•480 min. (double-sided
Approx. 80 min. (single-sided)
Approx• 160 min. (double-sided
5"
74 min.
3 1/2"
20 min.
Audio
DIGfTALAUDIO
Dolby Digital
disc
Max. Playing Time
Approx 240 min (single-sided)
DTS disc
Digital Audio
disc
Stereo disc
NTSC
video
format
MP3 disc
NTSC
s used
inalofNodh
Amer
ca,thePhiipplnee,
South
Korea
andJapan
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
,, DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
• Many DVD discs are encoded
with copy protection.
Because of this, you should only connect your DVD
player directly to your TV, not to a VCR. Connecting
protected
to a VCR results in a distorted
picture from copy-
DVD discs.
• This product incorporates
copyright protection
patents and other intellectual
technology
that is protected by methods
property rights owned by Macrovision
Corporation
claims of certain U.S.
and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering
or disassembly
is prohibited.
CD-R Discs
• Depending
on the disc recording device (CD-Recorder
or PC ) and the condition of the disc, some CD-R discs
may not be playable.
• Use a 650MB/74
minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable)
media, as they may not be playable.
• Only the CD-Rs that are properly "closed" can be fuliy played. If the session is ciosed but the disc is ieft open,
you may not be abte to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters
• Use discs recorded with a compression/decompression
data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions
• Only a consecutively
(. / = +).
can be played.
written Multi session disc can be played. If there is a blank segment
in the Multi session disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be piayed.
CD-R JPEG Discs
•Only
files with the ".jpeg" and ".JPEG" extensions
can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters
• Only a consecutively
written multi session disc can be played. If there is a blank segment
disc can be played only up to the blank segment.
• A maximum
of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji
Picture CD, only the JPEG flies in the picture folder can be played.
• Picture discs other than Kodak/Fuji
(. / = +).
in the multi session disc, the
Picture CDs may take longer to start playing or may not play at all.
"ption
--Front Panel-Headphone Jack
Volume control
Direct Play button
Open/Close button
Disc Change
button
ii;iiiiiii,uno,,oobu,,oo
i
Remote Control Sensor
Power (G/I) button
External Digital in Optical 2
Input Connector
Tunin g Down & Skip (,<<)buttons
Stop (11) button
Tuner Mode
Tuning Up & Skip pH) buttons
Play/Pause (H)
_ PRO LOGIC II indicator
LINEAR PCM indicator
GROUP indicator
CHAPTER indicator
TRACK indicator
PROGRAM indicator
System Status Display
DVD AUDIO indicator
DOLBY DIGITAL indicator
button
REPEAT indicator
DISC A_ B indicator
1 Input
quipment
output_
AM Antenna
Connector
Anynet
Output/Input
Connector
/
C_/
Video Output Connector
Connect the TV's video input connectors
(VIDEO IN) to the VIDEO OUT connector.
S-Video Output Connector
If the TV is equipped with an S-Video input
connector (S-VIDEOIN), connect it to the
piayer'sS-Videooutput connector.
FM Antenna
Connector
Component Video
Output/Input Connectors
Connecta TV with component
video inputsto these connectors.
'%
Remote Control
(AH59-01329A)
Audio Cable
(AH39-40001U)
Video Cable
(AH39-40001V)
4
AM Antenna
_AH42-20001P)
FM Antenna
(AH42-00004A)
Speaker Cables
[AH81-01451G)
(AH68-01493J)
User's Manual
Anynet Cable
(AH39-40001Z)
"ption
--Remote Control-_TV
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
indicator
DVD RECEIVER indicator
_MODE
button
DVDbutton _
_i
rdNER
TUNER
BANDbutton
DISC SKIP button
SLOW, MOIST button
REPEAT button
EZ VIEW button
STEP button
DSP/EQ button
_
P,aYiPausebutton
_
_
_[] PL II MODE button
AUXbutton
_[I]
VOLUME button
StoPbutton
.....
TuningPreset/CD8kip button
PL II EFFECT button
TUNING/CH button
MENU button
INFO button
RETURN button,
MUTE button
Direction/Enter button
TEST TONE button
SOUND EDIT button
Number(O~9)buttons
TUNER MEMORY, P.SCAN button
SLEEP button
LOGO COPY button,
SLIDE MODE button
ZOOM button
_
CANCEL button
REMAIN button
DIGEST button
_j_,i
¸ j_i
Remove the battery
cover on the back of
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
to avoid leaking
• Place batteries
in the remote
• Use the correct
type of batteries.Batteries
replace
• Do not expose
Replace the battery
cover.
polarities (+ and -).
Follow these precautions
• Always
3
both batteries
batteries
or cracking
cells:
control so they match the polarity:(+)
to (+)and
(-)to
(-).
that look similar may differ in voltage.
at the same time.
to heat or flame.
e ofOperationofthe RemoteControl
The remote control can be used up to approximately
23
feet/7 meters in a straight line. It can also be operated at
a horizontal
sensor.
angle of up to 30 ° from the remote
control
To open the remote control cover, push the
top of the cover, then slide downward.
necting the Speakers
ig or installing the product, be sure to turn off the power and disconnect
2,5 to 3 times
the power cord,
the size of the TV screen
\
Position of the DVD Player
Selecting the Listening Position
• Place it on a stand or cabinet shelf, or under
the TV stand•
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Front Speakers _Q
• Place these speakers in front of your listening
position, facing inwards (about 45 °) toward you.
• Place the speakers so that their tweeters wilt be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers•
Rear Speakers _
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other•
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
Unlike the front and center speakers, the rear speakers are used
to handle mainly sound effects and sound wili not come from
them all the time.
Center Speaker
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
8ubwoofer
• The position of the subwoofer is not so critical•
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
Rear
Speaker
(L)
Front
Speaker
(L)
Center
SpeaKer
Blue
While
Green
Subwoofer
Gray
Rear Speaker (R)
Press down the terminal
tab on the back of the
speaker.
2 insert the wire into the
terminal and release the
terminal tab.
• Insert the black wire into he black (-)
terminal and the gray wire into the
gray (+) terminal.
• Make sure the polarities (+ and -)
are correct.
Black
Gray
3 Connect the connecting jacks (6)
to the back
of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
• Make sure the polarities (+ and -) are correct.
nnecting the VideoOutto TV
Colnp_iteVideoS Video
Colnp_e_tV{deo
* Depending on your TV, Component Video input jacks may be marked as DVD Video input.
Composite
Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
S-Video
(Better
Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component
Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
• When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 16 to select Progressive Scan.
]
N(ProgressiveScan) Function
regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan
lines.
1 Press STOP button.
• When disc is played back, press the STOP button twice so that "STOP", appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively
• When you select P SCAN, "P.SCAN" will appear on the display
f
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
• Depending on the brand and model of your TV, this function may not work.
lecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off
• "NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL
button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
Example:
DigitN
signal
components
suchasaSettopBoxorCDRecorder.
Connect Video Out on the DVD player to Video in on the TV,
Connect the Digital input (OPTICAL I or 2) to the Digital Output on the externN digital component,
3
Press AUX on the remote control to select 'DIGITAL 1, 2',
• Each time the button is pressed, the selection
', You can also use the FUNCTION
The mode
switches
as follows:
changes as follows: DIGITAL
l -_ DIGITAL
2 -_ AUX 1 -* AUX 2.
button on the main unit.
DVD/CD
-_ DIGITAL
1 -_ DIGITAL
2 _ ADX1 _ AUX2 -_ FM -_ AM.
• When you select DigitN 1 or 2, you are selecting the OpticN 1 and 2
inputs on the unit respectively.
Example:
Analog
signal
components
such
asaVCRorTV.
Video Cable
1
2
3
Connect Video Out on the DVD player to Video
In on the TV.
• If you have connected
component
Connect Audio In on the DVD player to Audio
Out on the external analog component.
when you select DIGITAL 1 or 2 IN.
• Be sure to match connector
4
an external digital
Connect Video In on the DVD player to Video
Out on the external analog component.
component to Video In (1, 2) at the same
time, there will be video from AUX 1 even
• If you have connected Audio In (L, R) to
1, connect Video In to 1 as well, and if
colors.
Press AUX on the remote control to select AUX 1
or AUX 2.
• Each time the button is pressed, the selection changes as
follows:
DIGITAL
1 -* DIGITAL
• You can also use the FUNCTION
2 -_ AUX 1 -_ AUX 2,
button on the main unit.
The mode switches as follows: DVD/CD
DIGITAL
-* DIGITAL
2 _ AUX1 _ AUX2 -_ FM -_ AM.
and also an Analog
] -*
you have connected Audio In (L, R) to 2,
connect Video In to 2 also.
• When you select Aux 1 or 2, you are
selecting Video 1 or 2 inputs respectively.
ow to Connect to Anynet
the Anynet function, the DVD Home Theater System can be conveniently controlled from
your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater
System to the input terminal of any Samsung Anynet-enabled device, both can be controlled
from your TV. For detailed operation instructions and connection diagram, refer to the user's
manual of your Anynet-enabled TV.
• The Anynet function allows you to use your TV's remote control and menu to control all AV devices.
• However, this function is available only with 8amsung Anynet-enabled models.
Other AV devices
Use thisto connectAnynet-enabled
AV devices when necessary
@
1
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal,
2
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user's manual of your Anynet-enabled
TV and activate the Anynet function,
* This function is available only with Anynet-enabted TVs.
• If the Anynet input and output terminals are reversed, communication
with the TV will fail and
you wilI not be able to use the Anynet function,
Convenient AV Device Control Via Anynet
You can conveniently control the DVD Home Theater System and other AV devices from your
TV with the remotecontrol via Anynet.
'ngtheFMandAMAntennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
AM Loop Antenna
(supplied)
FM Antenna (supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
FM
75O
1. Connect the FM antenna supplied to the FM 75_2
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
reception is poorl Connectan Outdoorantenna.
Beforeattachinga 75_ coaxialcable (with a standard
type connector),disconnectthe supp!ied FM antenna.
Cooling Fan
AM loop antenna.
1. Connect the AM loop antenna supplied
to the AM and ff7 terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
The coolingfan dissipatesthe heatgeneratedinsidethe unitso that the unitcan be operated
normally.The coolingfan isactivatedautomaticallyto supplycool air to the unit.
_@_p_goo_o
_ Please observe the following cautions for your safety.
I _) I_
_
_& _
%_b_u_'_' _
' Make sure the unit is well-ventilated If the unit has pool-ventilation,the temperature inside the unit could rise
and may damage it.
, Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilationholes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
7i
reUsingYourDVDPlayer
player is capable of playing DVD, CD, MP3 and JPEG discs.Depending
are using, these instructions
WNHDEC
may vary slightly. Read the instructions
on the disc you
carefully before using.
MODE
Broadcast System
.....
9
• This device is designed to work with the NTSC video format.
• For normal playback, the video format a DVD disc is recorded in
must coincide with your TV's video format.
_iii_fi
ii}i;
the TV and DVD Player with a Single Remote Control
Press MODE button.
• Each time the Mode button is pressed, the TV indicator (red) and the DVD RECEIVER
indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation:
POWER, CHANNEL,
VOLUME, TV/VIDEO,
and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 69 for more information
on the operation of the remote control.
jji
ii;¸
isc Playback
DISC SKIP
• Playback starts automatically.
top playback,
ss STOP during playback.
• If pressed once, "PR£SS ]PLAY" is displayed
and the
stop position will be stored in memory. If
PLAY/PAUSE ( _/11) button or ENTER button is
pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, "STOP" is displayed,
and if
PLAY/PAUSE ( _'11 ) button is pressed,
starts from the beginning.
playback
temporarily pause playback,
PLAY/PAUSE during playback.
• To resume playback,
button again.
press PLAY/PAUSE
Groups and tracks (DVD-AUDIO)
• DVD-audios are divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
f
GROUP 1
TRACK
I
_1_
TRACK
2
,_,
_1
TRACK
3
-_
GROUP2
TRACK
1
_1
TRACK
2
Titles and chapters (DVD-VIDEO)
• DVD-videos are divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TmTLE 1
CHAPTER
1,
I
CHAPTER
2
TmTLE 2
'4 CNAPTNR
I
3
22
CHAPTER
I ,
I
CHAPTER
2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK
I
14
TRACK
2
_1._
TRACK
3
-_ -,_
TRACK
4
_1
TRACK
5
• In this manual, the instructions marked with "DVD (_)"
DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
are applicable to
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initiat screen may appear different.
aDiscintheDiscchanger
DVD/CD function is automatically
selected when Disc Skip is pushed.
• All the discs will be played in turn, startingwith the one selected.
_uwish to play the current disc only, press REPEAT on the front
one or more times, until REPEAT" DISC is displayed.
disc selected is not loaded, the next disc is played automatically.
J _iii_¸
%_,,,,iii
P3-CD Playback
Data CDs CD-ROM,
CD-R, CD-RW) encoded in MP3 format can be played.
• The MP3 menu screen will appear
and playback will start.
• Depending
appearance
different.
on the MP3 disc, the
of the menu may be
^ Us_
_ _ i_
see_tanetheralbum
• To select another album and track,
repeat Steps 2 and 3 above.
ii
i!
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
PEG File Playback
captured
with a digital
camera or camcorder,
or JPEG flies on a PC can be
stored on a CD and then played back with this DVD player.
_,_, Slide Mode
1
@
From top to bottom
4_
From bottom to top
@
®
O
Rectangular shape in the center
Vertical curtain shape
4_
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically•
_
__ _ _ _ _ _
_
__I_
Cancels the slide mode.
............
_!_!_ii_!_i_i!!_iii_!_!_iii_!i!i!
!
_s I_1_1_
to skip to the next slide.
• Each time the button is pressed, the slide moves backward or forward.
jji
ii;¸
,_,i
_
Digest Function
You can view 9 JPEG images on the TV screen,
• JPEG files wilI be shown in
g windows.
• The selected image is played for 5 seconds before moving to
the next image,
©
iew the previous or next image with 9 windows, press _t_,_.
_,_, Rotate/Flip Function
A. button:Flip Vertically
®®®®_®®®®
4 button:Rotate90°
Counterclockwise
button: Rotate 90 ° Clockwise
Original Image
V button: Flip Horizontally
• playingDiscInformation
can view disc playback information
Display
on the TV screen,
disappears
Display disappears
" t_ appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
Display disappears
operation
is not possible with the disc currently being played.
• What is a Group?
A group of tracks contained
• What is a Title?
A movie contained in a DVD-VIDEO
• Depending on the disc, the disc
information
display may appear different.
• Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
_&,
MP3CDdisplay
in a DVD-AUDIO
O
disc.
disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO,
CHAPTER
display
_]
AUDIOLANGUAGE
dis#ay
_
TRACK(FILE)display
_
SUBTITLE display
[']DI_
DIGITAL
ELAPSEDTIMEdisplay
_
ANGLE display
TITLE display
GROUP display
_
LR
CD, or MP3-CD.
STEREO (L/R) display
DOLBY DIGITAL display
REPEAT PLAYBACKdisplay
eckingthe RemainingTime
Each time the Remain button is pressed
\
R[MAIN
ow Playback
_,_, Fast Playback_
i:
ii
_y_,
_,_,_,
_,
_
v_:;_,_
i i
i_
%ow
`_))_i_ii!_i_ii_i_i:_!_ii:i_!i_i_i!_i_!_!_!_i_i_i_i_i!_i!_
_
iii;;;<;
;;K
q
¸
z_
@
4_
4_
Slow Playback
...... iii
......
_i_i
i_
_ili:
_i _
_'iii
_!i!_
iii
iiii iii ..........
_i ii
4_
@
iiii
i_i
_
kipping Scenes/Songs
ying Frame by Frame
Press STEP button.
• The picture moves forward one frame each time the
button is pressed during playback.
• During fast playback of a CD or MP3-CD. sound is heard only at 2x speed,
and 7ot at 4x. 8x. and 32x speeds.
• No sound is heard during slow playback and step motion playback.
peat Playback
you to repeatedly
play a chapter, title, track (song), or directory (MP3 file).
_ii_iii!_iiii_
'_,_I_
_ii_i_ii!_i_iii_iii_i_ii!_i!!
ii
4_
1
Press INFO button twice.
2
Press Cursor _ button to move to
REPEAT PLAYBACK(_# ) display,
(_) T_TL
3
Press Cursor _r button to select the
desired Repeat Playback mode.
4
Press ENTER button.
* For MP3 and JPEG discs, you cannot select
Repeat Play from the information display screen.
• CHAPTER : Repeatedly plays the selected chapter.
• TITLE : Repeatedly plays the selected title.
• GROUP : Repeatedly plays the selected group.
• RANDOM : Plays tracks in random order.
(A track that has already been played may be played again,)
• TRACK : Repeatedly plays the selected track.
• FOLDER : Repeatedly plays all tracks in the selected folder.
• DISC : Repeatedly plays the entire disc.
• OFF : Cancels Repeat Playback.
_
Repeat Playback
!iiiiii!ii!ili_iii
!i!
!ii!iiiiiiii:!i!i!;iii
!i¸ii
¸!iiil!i!!il¸iiii
_!i
!!iiiiiii!iiill
!ii!:iii!ii
!!ii_iii!
ii̧¸
!iii
!!!i!ii;iil
iii
!¸ill
i̧!!!ii
!ii!!;
i
roii
iiil _ii_!i!!i!i!i!
¸iiiiiii:ii!!ii!!_iii_iiii!i!_iii:!i!!,i:iiiii,!:iiiii_!i!
¸ii_iii!!,ii!i_i!ii
¸ii!iiiiiii_i_ii'i!!ii!i!i_i_i!ii!iiiii,!¸!¸iiiii!ii
¸i!!ii_ii!i!!i!i_!i!i!iiiiii!i:!!i
¸!ii!!_ii!ii!!i!i!i!_ii_ii_!ii,iiii_ii!i_ii!ii_iiii!ii!ii:i_i
(
i_
_,_ __, ,'_:
• For a CD, press INFO button once,
i 4_)i
i
?,
,,_
:r
i_• ;i ¸¸
• When ENTER button is pressed,
the selected position will be stored in
memory.
REPEAT : A--B
REPEAT : A--
to normal playback, press Cursor A, ,_
to select (_# OFF.
• The A-B Repeat function will not work on an MP3 or JPEG disc.
:,,_ ,,,
b_x _,4q_
_
gle Function
This function
alIows you to view the same scene in different angles.
• Each time the button is pressed, the angle changes as fo!lows:
• The Angle function works only with discs on which multipIe angles have been recorded.
Function
allows you to enlarge a particular
area of the displayed
image.
_,_, Zoom (Screen Enlarge) Function
• Each time the button is pressed, the
zoom level changes as follows:
¢-
€-
4_
_,_, Aspect Ratio
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
• This function will not work if the DVD is recorded with multi-camera
• Black bars may not disappear
angle format.
because some DVD discs have a built-in horizontal to vertical ratio.
us Group/ NavigatingPages
.... _,_, Bonus Group
Some DVD-Audio discs have an extra 'bonus' group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
EZVIEW
bor
a
• if you eject the disc, switch the power off, or unplug the ptayer, you will need to re-enter
the key number.
_,_, Navigating Pages
Duril
remc
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be abte to seiect images depending on how the
disc was manufactured.
Audio/Subtitle
Language
_,_= AudioLanguage
Selection
Function
|
bu_#_
___ _ii
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.)is
selected each time the button is pressed.
[_ i i[1
< ] _1]i}
.:1
<i1
_,_= Subtitle
Language
Selection
Function
ii
i;
• Depending on the disc,
the Subtitie and Audio
Language functions
may not work.
Ip~42p(DSI860)-SEA
9/15/04
2:49
PM
Page
+
43
Directly
toaScene/Song
II
b_
ti
SdLECT :
i_
03
• You can press I_11_.t
on the remote
control to move directly to the desired
title, chapter, or track.
• Depending on the disc, you may not
be able to move to the selected title or
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
from the disc information
time.
screen.
• When playing an MP3 or JPEG disc, you
cannot use _ ,'_ to move a folder.
To move a folder, press • (Stop) and
then press A ,'_.
+
"ngDisc Menu
can use the menus for the audio language, subtitle language,
DVD menu contents differ from disc to disc.
profile, etc.
• When you select the disc menuthat is not
supported by the disc,the "This menu is not
supported" messageappears on the screen.
ii
ii
ii
ii
ii
PBC (Playback Control)
Function
Press the MENU button while VCD 2,0 version disk is played.
Each time you press the button, "PBC ON" and "PBC OFF" will be repetitively selected in the display.
• PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
• PBC OFF: This VCD disc is version 1.!. The disc is played back in the same way as with a music CD.
sing the Title Menu
For
DVDs containing
Depending
muItipte titles, you can view the title of each movie.
on the disc, this function may either not work at all or may work differently.
• The title menu appears.
_s MENU button to exit the setup screen.
"
Lan
guage is set to English by defauJt.
s RETURN button to return to the previous level.
_ss
MENU button to exit the setup screen.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
43
+
• Once the setup is complete, ifthe languagewas
set to English, OSD will be displayed in English.
_ii]iiii;iiiiii!!
Selecting
the
OSD Language
Selecting
the
Audio Language
(recorded on the disc'_
Selecting
the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu Language
(recorded on the disc)
* If the language you selected is
not recorded on the disc, menu
language will not change even
if you set it to your desired
language,
+
4Zp~74P(DSI860}_SE
A
9/15/04
2:50
•
PM
Page
44__
TV Screentype
_endingon your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
)ect ratio.
•
,
<<<<<<<:::v<>:<:<q
¸:<xM¸_=¸¸
!
_
PressCursor_'button
tOmoveto 'TV
'
DISPLAYandthen
pressENTERbutton,
press
• Once the setup s complete,
you wilI
be taken to me pre_ ous screen.
)n to return to the previous level.
ss MENU button to exit the setup screen.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
45
+
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal 3reference. Select "16:9" if you have a wide screen TV.
Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
°You can enjoy the wide screen aspect.
Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
°Black bars will appear at the top and bottom of the screen.
Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
°You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending
the software, the type of TV, and the TV aspect ratio setting.
+
on
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
46
+
ngParental
Controls
(Rating
Level)
restrict playback of adult or violent OVDs you do not want children to view.
©
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
47
+
• If you have selected Level 6, you
cannot view DVDs with Level 7 or
higher.
• The higher the level, the closer the
content is to violent or adult material.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
• This function works only ifa DVD disc contains the rating level information.
_s
RETURN button to return to the previous level.
s MENU button to exit the setup screen.
©
43P~74P(DSI860)-SEA
9/15/04
2:50
•
PM
Page
48
+
the Password
can set the password for the Parental (rating level) setting.
• The password is set to "7890" by default
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
49
+
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
s RETURN button to return to the previous level.
s MENU button to exit the setup screen.
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
•
Page
50
+
the Wallpaper
g a DVD or JPEG CD, you can set the image you like as background wallpaper.
>Setting
Dui'n
the Wallpaper
iil(iiil;!i)
<:_!i!:_
7!:11<:!::
`
_:b _k ress
PLAY/PAUS!
bUttOn
• "COPY LOGO
displayed
DATA" wilt be
on the TV screem
iii ;<-J_
X_
Thepower_illturnoff
konand
andihenba
thedisctraywillopen
automaticall
" The selected
_allbaDer wu De
" You can repeat Steps I aria 2 _o
set u_) to 3 walbapers,
a_splayea.
Select this to set the
Select this to set the desired
Samsung
_mage as your wallpaper.
Logo image as
your wallpaper.
+
43P~74P(DSI860)-SEA
>To
9/15/04
2:50
PM
Page
51
+
Change the Wallpaper
1
_J-ess RETURN button to return to the previous level.
43P~74P(DS1860)-SEA
9/15/04
2:50
PM
Page
52
PlaybackMode
DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
_ii£3Y
,_::i_
i_!!b_
K__i_ii!ii
_:
H
i_i
_,_ _9,
',K_',_,
iiii
iI
_;_,,__,,,_,
• Set ste_)s 1 ~ '1 again if you want to
switch to DVD AUDIO Pla_ _noae.
When Selecting DVD Play Mode:
• DVD VIDEO : set to pJaythe DVD video
contents contained in DVD
audio disc.
• DVD AUDIO : set to play the default DVD
audio.
s RETURN button to return to the previous level.
• DVD Play mode is set to DVD
Audio as factory default setting.
_s
MENU button to exit the setup screen.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
53
+
SYNC Setup
,: Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
• Setup menu appears.
3
• 'Audio' menu appears.
4
• AV-SYNC screen appears.
• You can set me
audio
delay, ume between 0 ms
and 300 ms, Set it to the optimal status
s RETURN button to return to the previous level.
_s
MENU button to exit the setup screen.
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
54
+
ing the Speaker Mode
outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
I
3
4
n,
)
TES/IONF
• :or C LS. and RS eacn time me uutton
ts oressea the mode switches
atternateb as follows: SMALL -_ NONE
• For L and R the mode is set to SMALL
Select this when using the speakers.
_iSelect this when no speakers are installed.
• Depending
on PRO LOGIC and STEREO. the speaker mode may vary.
©
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
55
+
etting the Test Tone
Test Tone to check the speaker connections and to adjust the speaker levels.
• The test tone will be sent to L -* C -_
R -* RS -* LS -* SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
RETURN button to return to the previous level.
MENU button to exit the setup screen.
.....................................................................
I
Whenmanually
testingusingtheTESTTONEbutton
L: Front
:ront Speaker
R:
Speaker (L)
(R)
C: Center
Speaker (L)
LS:
Real'Speaker
• Test tone will be produced as follows:
Whet" playing a DVD or CD. this will work
only in Stop mode.
• Use this function to check that each speaker is
correctly connected and that there is no problem.
SW: Rear
Subwoofer
RS:
Speaker (R)
.......................
PressTEST TONE button.
!
:
:
To end the test tone,
i
press TEST TONE button,
i
Start
©
_
"
%
...............................................
/
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
56
+
ing the Delay Time
the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
2
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening
placement
position at different
of speakers,
times depending
you can adjust this difference
effect to the sound of the Center Speaker
on the
by adding a delay
and Surround
Speakers.
• With [][]PL (Dolby Pro Logic II), the delay time may be different for each mode.
• With AC-3 and DTS. the delay time can be set between 00 and 15mSEC.
©
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
57
+
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
•
Setting
CENTER
If the distance
SPEAKER
of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise. change the setting according to
the table.
Distance between Df and Dc
0 inch
13.6 inches
I
27.2 inches
40.8 inches
'
4.5 feet
,
5.6 feet
'
Delay Time
0 ms
1 ms
3 ms
4 ms
5 ms
f
Ideal CENTER
!
/
I
I
(
I
• Setting REAR (SURROUND)
SPEAKERS
If the distance of Df is equal tc the distance of Ds
in the figure, set the mode as 0ms. Otherwise.
change the setting according to the table.
Distance between Df and Ds
0 inch
i
i
40.8 •inches
6.7 feet
10.0 feet
13.4 feet
16.7 feet
I
,
'
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
"_'_
placement
Rs
_;;;_
_i):..._
I
/
Ideal
SURROUND
SPEAKER
placement
I[ is deslraule
1:oplace al seeaKers w [hin this clrcle.
Df: The els[ance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
J
©
I
43P~TAP(DSI860]-SEA
9/15/04
2:50
•
PM
page
55_
theAudio Quality
'ou can adjust the balance and level for each speaker.
A
=
_II
i_
PressCursorA _r,
"_ !_ buttons
toselect
thedesired
itemandthen
pre_sENTER
button
; RETURN button to return to the previous level.
ss MENU button to exit the setup screen.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
59
+
L
Adjusting Front/Rear Speaker Balance
• You can selectbetween 00 and -06 and OFF.
• The volumedecreases as youmove closerto -6.
Adjusting
Center/Rear/Subwoofer
Speaker Level
• The volume level can be adJusted in steps from +6dB to -6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
60
+
• gtheDRC(Dynamic
Range
Compressio
can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
• The Cursor ,A button is pressed, the greater the effect, and
the Cursor ',f button is pressed, the smaller the effect.
s RETURN button to return to the previous level.
_s
MENU button to exit the setup screen.
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
61
Field (DSP)/EQ Function
•) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
• "DSP" appears an the display panel.
• Each time the button is pressed,the sebction changes as fo!lows:
• This feature
DVD-Audio
works with CDs,
and Do, by Digital
MP3-CDs
and 2 channel
discs
• When playing a DVD disc encoded with two or more channels,
multi-channel mode wilI be selected automatically and DSP/EQ
function does not work
POP, JAZZ,
STUDIO
ROCK: Depending
on the genre of music, you can select from POP, JAZZ, and ROCK.
: Provides a sense of presence
CLUB : Simulates
as if in a studio.
the sound of a dance club with a throbbing bass beat.
HALL : Prowdes a clear vocal as if _istening in a concert hal/.
MOVIE: Provides the feeling of a movie theater.
CHURCH:
Gives the feel of being in a grand church.
PASS: Select this for normal listening.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
62
+
Iby Pro LogicII Mode
can select the desired Oolby Pro Logic II audio mode.
[
_]
PL IH
• When selecung Pro Log c I mode. connect your external device _o me
AUDIO
NPUT jacks (L and R) on me player. If you connect to on _,one of
me q_uts (L or R_. you cannot listen to 5.! channel surround souna.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Aaos realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers,
while using .ius[ me front leftand righ[ speakers.
• MATRIX: You will hear 5.1 cllannel surround souna.
• STEREO: Select thisto listen to sounds frorr the front left and ngnt speakers and the subwoofer onl}
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
63
+
by Pro LogicII Effect
<This
function
works only in Dolby
Pro Logic MUSIC mode.
• You can select either 0 or 1.
• You can select between 0 and 7.
• You can select between 0 and 6.
• When playing a DVD disc encoded with two or more channels,
selected automatically
• PANORAMA:
and
multi-channel
This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound"
• CENTER WIDTH:
effect with side wall imaging.
Sound is output to the center speaker only. The front left and right speakers
produce phantom sound
• DIMENSION:
mode will be
DDPL mR(Dolby Pro Logic II) button does not work.
Incrementally
adjusts the sound field _DSP_ from the front or rear.
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
64_
ning to Radio
can listen to the chosen band (FM, AM broadcast stations by using either
the automatic or manual tuning operation.
i_<ZIDiii!i!!ii!!!!iiiii!i)<IIIII:D
iii ¸
k
_i
<ZID
, -
<>LC!<_¸
<IIIIIIID
When _ _ is pressed, a
preset broadcast station is
selected.
,u,,=. u
• The selection toggles back
and forth between "FM" and
"AM" each time the
TUNER(BAND) button is
pressed.
Press and hold _(_
to
automatically search for
active broadcasting stations.
Briefly press@@
to
increase or decrease the
frequency incrementally.
I
-O
Mmn Umt
•
•
button
toselectthe
PresstheFunction
desredband(FM,AM).
2
II1
elec[
PRESET and then oress I_1_1I_
button to select the oreset stauon.
=ress the STOP (I)
button
o select "MANUAL'
ana
men press and hold _
_
button to
automatically search the band.
Press STOP {I to select
MANUAL and then briefly
Dress _
I_
to tune in to a lower or
higher freauency.
ss
MOIST
button
to listen
Mono/Stereo.
applies
only when
listening
to an FMinstation.)
• Each time the button is pressed, the sound switches between "STEREO"
• In a poor reception area. select MONO for a clear, interference-free
4>
and "MONO".
broadcast.
43P~74P(DSI8e0)-SEA
9/15/04
2:50
PM
Page
65
+
Example: Presetting FM 89.1 in the memory
TuNE R(BAN )
bu
• Each time the button is pressed,
the band switches
between
"FM"
and "AM".
• You can select between 1 and
15.
• Refer to Step 2 on page 65 to
automatically
• "PRGM" flashes in the display.
or manually tune in
to a station,
• Pressthe TUNER MEMORYbutton before
'PRGM'disappears from the display.
• 'PRGM' disappears from the display and
the stationis stored in memory.
une in to a preset station, press _
remote control to select a channel.
©
_
on the
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
66
+
nvenient Functions
_,_, Sleep Timer Function
You can set the time that the DVD player wilI shut itself off.
• "SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows: 10 -_ 20 -* 30 -* 60 -*
90 -* 120 -4, 150 -* OFF.
the sleep timer setting, press SLEEP button.
• The remaining time before the DVD player will shut itself off is displayed.
• Pressing the button again changes the sleep time from what you have set
earlier.
5LE[P
the sleep timer, press SLEEP button until
FF appears on the display.
.....
/
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
67
+
_._. Adjusting
Display
Brightness_._= Mute Function
This is useful when answeringa doorbellor
telephone call.
You can adjust the brightness of the display on the
main unit so it won't interfere with your movie viewing.
• Each time the button is press, the brightness
as follows: 'SLIGHTLY
• 'MUTE ON' appears in the display.
changes
DARK, DARK, BRIGHT'.
• To restore the sound, press the button again to
select 'MUTE OFF'.
_,_, UsingHeadphones
Use headphones (not supplied) for private listening pleasure.
• To prevent hearing damage, do not increase the
volume excessively when using headphones.
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
68
+
• gaTVwiththeRemote
Control
i_i
_ i!
....
MODE
ii_!i!_ili_i_i!i_iiiil;!il;i;;ii_!i;i_
!i;i;i_i_i;i_i_i;i_i_iiiiiiiiiiiiiiiiiiiil;i_i_iiiii_iiiiiiii_i!ii_ill
_i;;ii_!i;i_
!i;i_
!i;i_
!i;i_
!i;i_
!i;i_
!i;i;i
il;i_i_iiii;!i!_i
ii_iiii
_!i_i_!_ili!_iiiiiii_i!iii_i_i_!il
_i_i
_!i_i_;!_i_;i_i
_ii_i_i_;!_i_!!_i_!!_i_!!_i_!!_i
i;iil
i;iil
i;iil
i;iil
l!i_!i_ii!_illiill_ill_ill_l!i!_illiill_ill_ill_ill_illiill_l!i_!!_!!_
i;iil
i;iil
ii_iiii!_iiiiiiiiiii_iiii_iiii_iiii_iiiiiiii_i!ii_iill
_:
iiii
®
iiii® ® ® iiiiiili<i
iiil<:::::_
® <::::;'
<iiiiiii!
iiii ii
I0_
i,_i;</!,_<_
_bi!<_<,_,
iiii I
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter go,
01, 02, 03, 04, and 05.
_i
>
_i!
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
• The remote control may not work on some brands of TVs. Also some operations
possible depending
may not be
on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control wilI
work on a Samsung TV by default.
+
43P~74P(DSI860)-SEA
1
9/15/04
SAMSUNG
2
ANAM
3
DAEWOO
2:50
PM
Page
69
+
00(Initial Value), 01,02, 03, 04, 05, 73
30
BRANDT
41
06~11,59
31
FERGUSON
41
12~18, 20, 21
32
PIONEER
4
LG
05, 20, 21,22, 53
33
TELEAVA
5
HITACHI
23, 40, 4< 49
34
FINLUX
41,48,
41
05,42,47
6
JVC
24, 55
35
FISHER
31
7
SHARP
27, 33, 34, 35, 54
36
AKAI
31
8
SONY
O5
27, 36
37
YOKO
TOSHIBA
27, 37, 42, 43, 44, 46
38
PHONOLA
10
SANYO
27, 30, 31,32
39
RADIOLA
11
MITSUBISHI
05, 27, 28
40
SCHNEIDER
O5
12
MATSUSHtTA
09, 26
41
NEWSAN
58
13
TELEFUNKEN
41,49, 51,57
42
CONTINENTAL EDISON
49
29, 61
43
SALORA
48
07, 09, 26, 48, 49, 50
44
SELECO
48
45
NOKIA
48
9
14
15
16
RCA
PANASONtC
SABA
40,41,47,48,49
05,45,47
05,45
17
PHILtPS
05, 45, 47, 64, 65, 66, 67, 68, 69
46
REX
48
18
GRUNDIG
39, 42, 46, 70, 71,72
47
MIVAR
46
19
ZENITH
38
48
IMPERIAL
46
20
MIVAL
52
49
CGE
46
21
NOBLEX
56
50
BANG & OLUFSEN
47
22
EMERSON
19
51
BRtONVEGA
47
23
MAGNAVOX
25
52
FORMENTI
47
LOEWE
05, 60
53
METZ
47
25
THOMSON
40, 41,49, 62, 63
54
WEGA
47
26
NORDMENDE
40, 41,49
55
RADIOMARELLI
47
27
LOEWE
36, 47, 05
56
SINGER
47
57
SINUDYNE
47
24
OPTA
28
BLAUPUNKT
39
29
SIEMENS
39
+
74
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
70
+
Callingfor Service
to the chart below when this unit does not function properly. If the problem you are experiencing
..............
.........
listed below or if the instruction below does not help, turn off the unit, disconnect
the nearest authorized dealer or Samsung Electronics Service Center.
Disctraydoesnotopen.
Playback
doesnotstart.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Is the region code of the disc "1" or "ALL"?
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
player.
• Make sure that the rating level is correct.
Playback
doesnotstart
• Are you using
the surface?
immediately
whenthe
• Wipe the disc
Play/Pause
buttonispressed,
Soundisnotproduced.
is not
the power cord, and contact
a deformed disc or a disc with scratches on
clean.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Soundcanbeheardonly
fromafewspeakers
andnot
allsix.
• When listening to a CD or radio, sound is output to the front
speakers (L/R)only. Select "PRO LOGIC I1"by pressing I][IPL H
(Dolby Pro Logic II) on the remote control to use all six speakers.
• Make sure that the DVD disc is 5.1-CH compatible.
• If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
Picturedoesnotappear,sound
isnotproduced,
orthedisc
trayopens2 to5 seconds
later,
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
DolbyDigital5.1CH
Surround
Soundisnot
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
• Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
produced.
.....
+
43P~74P(DSI860)-SEA
9/15/04
2:50
oDiscisrotating
butno
pictureisproduced.
oPicture
qualityispoor
andpicture
isshaking.
PM
Page
71
+
• Is the TV power on?
• Are the video cables connected properly?
• Make sure that the disc is not a PAL- disc.
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Is the remote control being operated within its operation range of
Theremote
control
does
notwork.
angle and distance?
• Are the batteries exhausted?
• Have you select the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
Audio
language
and
• Audio language and subtitles will not work for DVDs not containing
them. And depending on the disc, they may work differently.
subtitles
donotwork.
Menu
screen
does
not
appear
even • Are you using a disc that does not contain menus?
when
the
menu
function
isselected,
Aspect
ratiocannot
be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Can't
receive
radio
broadcast.
• Is the antenna connected properly?
• If the antennas input signal is weak, install an external FM antenna
in an area with good reception.
° The
main
unitisnotworking.• Turn off the power and hold the
(Example:
The
power
goes
outor
strange
noise
isheard,)
° TheDVD
player
isnot
working
normally.
Thepassword
forrating
levelhasbeen
forgotten.
[]
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While "NO DISC" messageappearson the display of mainunit, hold
the mainunit's _ buttonfor longer than 5 seconds."INITIALIZE"
appearson the display and all settings will return to the defaultvalues.
• Press the POWERbutton.
Usingthe RESETfunctionwill erase all stored settings.
Do not usethis unlessnecessary.
.....
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
72
+
on Handling and Storing Discs
scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
O Handling discs ...............................................................................................................
Do
the
get
Do
not touch the playback side of the disc. Hold
disc by the edges so that fingerprints
will not
on the surface.
not stick paper or tape on the disc.
_j Disc oLoraue ..........................................................................................................
Keep in a clean
Profcection jacket,
Store vertically.
Keep in a cool
ventilated area
Do not keep in
direct sunlig ht
.f
• Do not allow
the discs
• Do not load cracked
to become
or scratched
contaminated
with dirt.
discs.
_,9 Handling and Storing Discs .......................................................................................
When you get fingerprints
or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When
cleaning,
• Condensation
inside
from the inside
may form if warm air comes
the player.
may not operate
player
wipe gently
When
correctly.
condensation
If this occurs,
stand for 1 or 2 hours
+
forms
to the outside
into contact
of the disc.
with cold parts
inside the player,
remove
with the power on.
the player
the disc and let the
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
73
+
pecifications
T
F
U
R
¸
10dB
Usable Sensitivity
S/N Ratio
Distortion
55dB
0.5%
n
A
T
U
ME"
65dB
Usable Sensitivity
S/N Ratio
Distortion
35dB
2%
EuminanCeSignal" 1.0Vp:p(75E_load)
S_IDEO
M
[3
L
I
F
I
E
R
Front speaker output
Center speaker output
.
Rear speaker output
Subwoofer speaker output
• 100W x 2(4{2)
" I00W(4_)
Frequency range
S/N Ratio
I00W x 2(4£_2)
I00W(4_)
20Hz~20KHz
75dB
Channel separation
50dB
I
Input sensitivity
(AUX)500mV
5.lch speaker system
Eron_Ce_ter/Rear Speaker
Subw0ofer Speaker
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
74
+
otes on Terminology
DOLBY
+
43P~74P(DSI860)-SEA
9/15/04
2:50
PM
Page
75
SAMSUNG
+
DVD PLAYER
This SAMSUNGbrand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG)and delivered new, inthe original
cartonto the original consumer purchaser, is warranted by SAMSUNGagainst manufacturingdefects in materialsand workmanshipfor a limited
warranty periodof:
One (1) Year Parts and Labor*
(*90 Days Partsand Laborfor Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchasedand used in the United States. To receive
warranty service, the purchaser must contact SAMSUNGfor problem determinationand service procedures. Warrantyservice can only be
performed by a SAMSUNG authorizedservice center. The original dated bill of sale must be presented upon requestas proof of purchase to
SAMSUNGor SAMSUNG's authorizedservice center Transportation of the product to and from the service center is the responsibilityof the
purchaser.
SAMSUNGwill repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
foundto be defective duringthe limited warranty period specified above. All replaced partsand products becomethe property of SAMSUNG and
must be returned to SAMSUNG. Replacement partsand products assumethe remainingoriginal warranty, or ninety (90) days, whichever is
longer.
SAMSUNG's obligationswith respect to software productsdistributed by SAMSUNGunder the SAMSUNGbrand name are set forth in the
applicableend user license agreement. Non-SAMSUNGhardware and software products, if provided, are on an "AS IS" basis. Non-SAMSUNG
manufacturers,suppliers, publishers, and service providers may provide their own warranties
This limited warranty covers manufacturingdefects in materialsand workmanship encountered in normal, and except to the extent otherwise
expresslyprovided for in this statement,noncommercialuse of this product, and shall not apply to the following, including,but not limited to:
damage which occurs inshipment; delivery and installation; applications and uses for which this productwas not intended; altered productor
serial numbers; cosmetic damage or exteriorfinish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment,systems, utilities, services,parts, supplies, accessories,applications, installations, repairs,external wiring or connectors not supplied
and authorizedby SAMSUNG,or which damage this productor result in service problems; incorrect electrical line voltage, fluctuationsand surges;
customeradjustments and failure to follow operating instructions,cleaning, maintenance and environmental instructionsthat are covered and
prescribed inthe instruction book; product removal or reinstallation; reception problemsand distortionrelatedto noise,echo, interference or other
signal transmission and delivery problems. SAMSUNGdoes not warrant uninterrupted or error-flee operation of the product.
THERE ARE NO EXPRESS WARRANTIESOTHERTHAN THOSE LISTED AND DESCRIBEDABOVE, AND NO WARRANTIESWHETHER
EXPRESS OR IMPLIED, INCLUDING,BUT NOT LIMITEDTO, ANY IMPLIEDWARRANTIES OF MERCHANTABILITYOR FITNESS FOR A
PARTICULARPURPOSE, SHALL APPLY AFTER THE EXPRESSWARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTYOR GUARANTYGIVEN BYANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCTSHALL BE BINDING
ON SAMSUNG SAMSUNGSHALL NOT BE LIABLE FOR LOSS OF REVENUEOR PROFITS, FAILURETO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL,INCIDENTALOR CONSEQUENTIAL DAMAGESCAUSED BYTHE USE, MISUSE OR INABILITYTO
USETHiS PRODUCT,REGARDLESS OF THE LEGALTHEORY ON WHICHTHE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITYOF SUCH DAMAGES. NOR SHALL RECOVERYOF ANY KINDAGAINST SAMSUNG BE GREATER IN
AMOUNTTHAN THE PURCHASE PRICEOF THE PRODUCT SOLD BY SAMSUNGAND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITINGTHE FOREGOING,PURCHASERASSUMES ALL RISKAND LIABILITY FOR LOSS, DAMAGEOR INJURY TO PURCHASERAND
PURCHASER'S PROPERTYAND TO OTHERS AND THEIR PROPERTYARISING OUT OF THE USE, MISUSE OR INABILITY TO USETHIS
PRODUCTSOLD BY SAMSUNGNOT CAUSED DIRECTLYBY THE NEGLIGENCEOF SAMSUNG. THIS LIMITEDWARRANTY SHALL NOT
EXTENDTO ANYONE OTHER THAN THE ORIGINALPURCHASER OF THIS PRODUCT,IS NONTRANSFERABLEAND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidentalor consequential damages,
sothe above limitations or exclusions may not apply to you This warranty gives you specificlegal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, pleasecontact SAMSUNGat:
SAMSUNGCUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax:973-601-6001
t-800-SAMSUNG (1-800-726-7864)and www.SAMSUNGUSA.com
+
Ip_42p(DSI860)-SEA
9/15/04
2:48
PM
Page
2
........
_iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
SAMSUNG
ELECTRONICS
SERVICE
AMERICA,
DiViSiON
400 Valley Road. Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG
{1-800-726-7864)
www.samsun§ usa.com
ELEOTP,
ONIC8
mNC.