Disclaimer - FixYourDLP.com

Disclaimer
This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.fixyourdlp.com
Video Guides: http://www.fixyourdlp.com/guides
User Forums: http://www.fixyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.fixyourdlp.com/counterfeits
Sponsors:
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsored by DM
®
Pro AV 9350
English
E
Deutsch
D
Français
F
Italiano
I
Español
ES
✽ Projection lens is optional.
THIS IS TENTATIVE
SAMPLE.
■
PRESENTATIONS
■
WORKING SESSIONS
■
TRAINING
■
MULTIMEDIA
■
ANIMATION
■
VIDEO
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
TO THE OWNER
Before operating this projector, read this manual thoroughly and operate the projector properly.
This projector provides many convenient features and functions. Operating the projector properly enables you to
manage those features and maintains it in better condition for a considerable time.
Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this manual again, check operations and cable connections and try
the solutions in the “Trouble-shooting” section of the end of this booklet. If the problem still persists, contact the sales
dealer where you purchased the projector or the service center.
SAFETY PRECAUTIONS
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
● This projector produces intense light from the projection lens. Do not stare directly into the lens as possible.
Eye damage could result. Be especially careful that children do not stare directly into the beam.
● This projector should be set in the way indicated. If not, it may result in a fire hazard.
● Take appropriate space on the top, sides and rear of the projector
cabinet for allowing air circulation and cooling the projector.
Minimum distance should be taken. If the projector is to be built
into a compartment or similarly enclosed, the minimum distances
must be maintained. Do not cover the ventilation slot on the
projector. Heat build-up can reduce the service life of your
projector, and can also be dangerous.
SIDE and TOP
REAR
20cm
50cm
50cm
1m
● Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation
holes.
● The Remote Control Unit, supplied to this projector, emits the laser beam as the Laser Pointer function from
the Laser Light Window while pressing the LASER button (for 1 minute). Do not look into the Laser Light
Window or shine the laser beam on yourself or other people. Eye damage may result.
● If the projector is not to be used for an extended time, unplug the projector from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
T
HE
T
R
US
T
E
D
S
OUR
CEDANGEROUS
F
ORPROJ
E
CT
OR
L
AMINDICATES
PSAN
DA
CCE
S
S
O
RI
E
S
THIS
SYMBOL
INDICATES
THAT
THIS
SYMBOL
THAT
THERE
ARE
IMPORTANT
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
2
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
OWNER'S MANUAL WITH THIS UNIT.
SAFETY PRECAUTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask
the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Voor de klanten in Nederland
Bij dit product zijn batterijen
geleverd.
Wanneer deze leeg zijn,
moet u ze niet weggooien
maar inleveren als KCA.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
3
COMPLIANCES
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
AC POWER CORD REQUIREMENT
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure
that the plug will fit into the power outlet. Do not try to defeat this safety feature.
Should you be unable to insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
4
TABLE OF CONTENTS
FEATURES AND DESIGN
6
PREPARATION
7
COMPUTER MODE
SELECTING COMPUTER SYSTEM
NAME OF EACH PART OF THE PROJECTOR
SETTING-UP THE PROJECTOR
CONNECTING THE AC POWER CORD
LENS INSTALLATION
POSITIONING THE PROJECTOR
LENS SHIFT ADJUSTMENT
PICTURE LEVEL AND TILT ADJUSTMENT
MOVING THE PROJECTOR
7
8
8
9
9
9
10
10
COMPATIBLE COMPUTER SPECIFICATIONS
PC ADJUSTMENT
PICTURE IMAGE ADJUSTMENT
NORMAL FUNCTION
PICTURE POSITION ADJUSTMENT
AUTO IMAGE FUNCTION
PICTURE SCREEN ADJUSTMENT
VIDEO MODE
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
CONNECTING TO THE COMPUTER
CONNECTING TO THE VIDEO EQUIPMENT
BEFORE OPERATION
11
14
15
SELECTING VIDEO SOURCE
SELECTING COLOR SYSTEM
PICTURE IMAGE ADJUSTMENT
NORMAL FUNCTION
PICTURE SCREEN ADJUSTMENT
SETTING
OPERATING RANGE
REMOTE CONTROL BATTERIES INSTALLATION
18
19
BASIC OPERATION
TURNING ON / OFF THE PROJECTOR
ADJUSTING THE IMAGE
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
LENS SHIFT ADJUSTMENT
KEY STONE ADJUSTMENT
BLANK FUNCTION
PICTURE FREEZE FUNCTION
P-TIMER FUNCTION
20
20
21
23
23
24
24
24
24
24
25
25
25
25
DIRECT OPERATION
MENU OPERATION
25
26
DIRECT OPERATION
MENU OPERATION
33
33
33
34
35
35
36
37
38
38
SETTING MENU
SETTING LANGUAGE
39
39
41
20
SOUND ADJUSTMENT
SELECTING INPUT SOURCE
29
30
32
16
16
18
HOW TO OPERATE THE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
MENU BAR
27
11
SIDE CONTROLS AND INDICATORS
OPERATION OF THE REMOTE CONTROL
OPERATING ON-SCREEN MENU
27
APPENDIX
OPERATING WIRELESS MOUSE
MAINTENANCE
TEMPERATURE WARNING INDICATOR
AIR FILTER CARE AND CLEANING
LAMP MANAGEMENT
LAMP REPLACEMENT
CLEANING THE PROJECTION LENS
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
42
42
43
43
43
44
45
45
46
48
26
26
26
TRADEMARKS
● Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.
● IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.
● Windows and PowerPoint are registered trademarks of Microsoft Corporation.
● Each name of corporations or products in the owner's manual is a trademark or a registered trademark of its
respective corporation.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
5
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
◆
Compatibility
This projector widely accepts various video and
computer input signals including;
● Computers
IBM-compatible and Macintosh computers up to
1280 x 1024 resolution.
● 6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PALN color system can be connected.
● Component Video
Component video signals, such as a DVD player
output, high definition TV signals including 480i,
480p, 575i, 575p, 720p, 1035i, 1080i-50 or 1080i60, can be connected.
● S-Video
S-Video signals, such as a S-VHS VCR output
signals, can be connected.
◆
High Resolution Image
This projector provides 1024 x 768 dots resolution for
computer input and 800 horizontal TV lines. The
resolution from the computer between XGA (1024 x 768)
and SXGA (1280 x 1024) is compressed into 1024 x 768
dots. This projector cannot display image of over 1280 x
1024 dots. When the resolution of your computer is over
than 1280 x 1024, reset the computer output for lower
resolution.
◆
Multi-Scan System
This projector has Multi-Scan System to conform to
almost all computer output signals quickly. There is no
need for troublesome manual adjustment of frequency
and other settings.
◆
One-Touch Auto Imaging
Incoming computer video signals are recognized and the
best setting is automatically selected by the Auto Image
function. No complicated setup is necessary and
projection is always precise.
◆
Progressive Scan Function
This function converts interlace video signals into
progressive scan signals and provide fine picture quality.
◆
Multilanguage Menu Display
Operation menu is displayed in; English, Deutsch,
Français, Italiano, Español, or Japanese.
◆
Digital Zoom (Computer Mode only)
◆
Motor-driven Lens Shift
The projection lens can be moved up, down, left and
right with the motor-driven lens shift function. This
function makes it easy to provide the projected image
where you want.
The zoom and focus can be also adjusted with motordriven operation.
◆
Keystone Correction
Positioning height of the projector may result in distorted
images being displayed in a trapezoid shape. Keystone
Correction maintains this problem by digitally altering the
projection to produce undistorted images.
◆
Power Management
Power Management function is provided to reduce power
consumption while the projector is not in use.
This Power Management function operates to turn the
Projection Lamp off when the projector detects signal
interruption and any button is not pressed over 5
minutes. The Projection Lamp is automatically turned on
again when the projector detects the signal or any
operation button is pressed.
This projector is shipped with this function ON.
◆
Digital Visual Interface
This projector is equipped with the DVI terminal for
connecting DVI (conforming VESA standard) output of
the computer.
◆
Multi Versatile Platform
This projector applies various input/output terminals and
4 terminal slots for expansion to tune to diversity of
signals from computers and video equipment.
◆
Selectable Terminal Slots
4-built-in Terminal Slots enable you to arrange any
combinations of input sources just by changing Terminal
Boards. For Terminal Boards, contact the sales dealer
where you purchased the projector.
◆
Laser Pointer Function
The Remote Control Unit supplied with this projector
includes the Laser Pointer function. This function helps
you to make a smart presentation on a projected screen.
◆
Wireless Mouse
The Remote Control Unit supplied with this projector has
Wireless Mouse function for the connected computer.
This function enables you to operate both projector and
computer with this Remote Control Unit only.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
The Digital Zoom magnifies the image up to 49 times,
allowing you to focus on crucial information at a
presentation.
6
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE CABINET
SPEAKERS
INFRARED
REMOTE RECEIVER
POWER CORD
CONNECTOR
PROJECTION LENS
MAIN ON / OFF
SWITCH
LENS COVER
CARRYING HANDLE
LEVEL AND TILT ADJUST HANDLE
BACK OF THE CABINET
EXHAUST VENT
INFRARED
REMOTE RECEIVER
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
● Do not put a flammable object near this vent.
● Keep the rear grills at least 3’ (1m) away
from any object, especially heat-sensitive
object.
● Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
LAMP COVER
BOTTOM OF THE CABINET
AIR FILTER
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
● Do not cover the vent slots.
● Keep bottom clear of any objects.
Obstructions may block cooling air.
ADJUSTABLE FEET
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
ADJUSTABLE FEET
7
PREPARATION
SETTING-UP THE PROJECTOR
CONNECTING THE AC POWER CORD
This projector uses nominal input voltages of 100-120 V
or 200-240 V AC. The projector automatically selects the
correct input voltage. It is designed to work with singlephase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of the type of power supply being in use.
Connect the projector with the peripheral equipment
before turning the projector on. (Refer to pages 12 ~ 15
for connection.)
Connect the AC Power Cord (supplied)
to the projector.
The AC outlet must be near this
equipment and must be easily
accessible.
NOTE ON THE POWER CORD
The AC Power Cord must meet the requirement of the country where you use the projector.
Confirm the AC plug type with the chart below and the proper AC power cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
AC Outlet side
Projector side
For the U.S.A. and Canada
For Continental Europe
Ground
To the POWER CORD
CONNECTOR on the
projector.
To the AC Outlet.
(120 V AC)
To the AC Outlet.
(200 - 240 V AC)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
8
PREPARATION
LENS INSTALLATION
Before setting up the projector, install the Projection Lens on the Projector.
1. Before installation, check where the projector is used and prepare suitable lens. For specifications of the
Projection Lens, refer to the manual separately attached or contact the sales dealer where you purchased the
projector.
2. For installation, refer to the installation manual supplied to the Projector.
When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface.
And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or
mechanical parts.
POSITIONING THE PROJECTOR
This projector is designed to project on a flat projection
surface.
SCREEN
ROOM LIGHT
The brightness in the room has a great influence on
the picture quality. It is recommended to limit
ambient lighting in order to provide the best image.
VENTILATION
This projector is equipped with cooling fan to protect it from
overheating. Pay attention to the following to ensure proper
ventilation and avoid a possible risk of fire and malfunction.
● Do not cover the vents with papers or other materials.
● Keep the rear grill at least 3 feet (1 m) away from any
object.
● Make sure that there are no objects under the
projector. An object under the projector may prevent
the projector from taking the cooling air through the
bottom vent.
AIR INTAKE VENT
(BOTTOM SIDE)
EXHAUST VENT
(REAR SIDE)
LENS SHIFT ADJUSTMENT
The projection lens can be moved up, down, left and right with the motor-driven lens shift function. This function
makes it easy to provide the projected image where you want.
Use the LENS SHIFT button and
the POINT UP/DOWN button to
move the image up or down.
Use the LENS SHIFT button
and the POINT LEFT/RIGHT
button to move the image left
or right.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
MOVED UP OR DOWN
MOVED LEFT OR RIGHT
9
PREPARATION
PICTURE LEVEL AND TILT ADJUSTMENT
Picture tilt and projection angle can be adjusted with
handles on both sides of the projector. Projection angle
can be adjusted to 5.7 degrees upper way.
1
Press the knob on the handle. The handle pop out.
2
Turn the handles (right and left) until the picture is
projected on proper position. Adjust height of rear
adjustable feet by rotating them until projector properly
stabled on the table.
3
Press knob and retract the handle.
REAR ADJUSTABLE
FEET. (Refer to P7).
LEVEL AND TILT
ADJUST HANDLE
KNOB
ADJUSTABLE
FEET
The height of front feet can be
adjusted by turning the handles.
MOVING THE PROJECTOR
For safety, be sure to hold Carrying Handles
on both sides by 2 or more people when
moving the projector. Moving it unproperly
may result in damage of cabinet or person's
injury.
Replace the lens cover and retract the feet to
prevent damage to the lens and cabinet.
1
Pull up the lock buttons on each side of carrying
handles and release the locks.
2
Pull carrying handles out fully until it's locked (with a
click). Move the projector by holding two handles by 2 or
more people.
3
To retract carrying handles, pull up the lock buttons and
release the lock of handles and press the handles fully
in until it's locked.
CARRYING
HANDLE
LOCK BUTTONS
Pull up the lock buttons
to release the lock.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
● Do not drop or bump the projector, otherwise damages or malfunctions may result.
● When carrying the projector, use a suitable carrying case.
● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to the projector. To transport the projector through a courier or transport service,
consult your dealer and best case should be applied.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
10
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from
computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just
by changing Terminal Boards. For Terminal Boards, contact the sales dealer where you purchased the projector.
NOTE; DVI Terminal is unavailable for INPUT 3 and INPUT 4 slots.
4 TERMINAL SLOTS (Factory set)
audio
PC control
INPUT-1
R
L
(mono)
serial port OUT
audio
R/Pr
G/Y
B/Pb
H/HV
V
R
PC control
L
DVI Terminal
INPUT-2
DVI
5 BNC Terminal
INPUT-3
serial port IN
AV Terminal
(mono)
USB
video/Y
audio
S-video
C
L
R
(mono)
INPUT/OUTPUT
TERMINALS
audio OUT
R
L
analog RGB
reset
(mono)
PC control
audio
R
L
(mono)
INPUT-4
R/C jack
HDB 15-PIN
Terminal
REPLACEMENT OF THE TERMINAL
1
Remove 2 Screws on the terminal.
2
Pull out the terminal by holding the handle.
3
Replace the terminal. Insert the terminal along Guide to
fit Plug into Socket.
4
Tighten the screws to secure the terminal.
Screws
Guide
Socket
Figure shows HDB 15-PIN terminal.
Plug
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
C
T
ORL
AMPSANDACCE
S
S
ORI
E
S
11
CONNECTING THE PROJECTOR
INPUT/OUTPUT TERMINALS AND JACKS
INPUT 2
INPUT 1
INPUT 1/2/3/4
DVI INPUT TERMINAL
Connect the component video output
(Cr, Y, Cb or Pr, Y, Pb) from the video
equipment to the R/Pr, G/Y and B/Pb
jacks or connect the computer output [5
BNC Type (Red, Green, Blue, Horiz.
Sync and Vert. Sync.)] from the
computer to the R/Pr, G/Y, B/Pb, H/HV
and V jacks. (Refer to P14, 15)
serial port IN
AUDIO INPUT JACKS
Connect the computer output
(Digital/Analog DVI-I type) to
this terminal.
(Refer to P14.)
audio
DVI
R
PC control
L
(mono)
audio
R/Pr
G/Y
B/Pb
H/HV
V
R
PC control
INPUT-2
serial port OUT
Connect the audio output
from the computer or
video equipment to these
jacks. (Refer to P14, 15.)
INPUT-1
5 BNC INPUT JACKS
L
(mono)
video/Y
audio
S-video
C
L
R
(mono)
audio OUT
R
L
analog RGB
reset
(mono)
INPUT 3
PC control
audio
R
INPUT-3
USB
L
(mono)
INPUT 4
CONTROL PORT CONNECTORS
When controlling the computer
with the Remote Control of
this projector, connect the
mouse port of your personal
computer to these connectors.
(Refer to P14.)
INPUT-4
R/C jack
INPUT 1/2/4
INPUT 3
AV INPUT (VIDEO/Y, C) JACKS
HDB 15-PIN INPUT TERMINAL
S-VIDEO INPUT JACK
Connect the composite video output
from the video equipment to the
VIDEO/Y jack or connect the Separate
Y/C video outputs to the VIDEO/Y and
C jacks. (Refer to P15.)
Connect the computer output
(Analog HDB 15-pin type) to
this terminal.
(Refer to P14.)
Connect the S-VIDEO
output from the video
equipment to this jack.
(Refer to P15.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
12
CONNECTING THE PROJECTOR
USB PORT
SERIAL PORT
IN TERMINAL
This port is used to control the
projector with the computer. It is also
used to control the computer with the
Remote Control of this projector.
(Refer to P40, 42.)
Connect the USB port of the
computer to this port.
If you control the projector by computer,
you must connect a cable (not provided)
from your computer to this terminal.
SERIAL PORT
OUT TERMINAL
audio
DVI
R
PC control
INPUT-1
serial port IN
L
(mono)
serial port OUT
audio
R/Pr
G/Y
B/Pb
H/HV
V
R
PC control
INPUT-2
This terminal outputs the
signal from SERIAL PORT
IN. More than two projectors
can be controlled with one
computer by connecting
SERIAL PORT IN. of another
projector to this terminal.
L
(mono)
video/Y
audio
S-video
C
L
R
(mono)
audio OUT
R
L
analog RGB
reset
(mono)
L
(mono)
RESET BUTTON
R/C JACK
When using the Wired / Wireless
Remote Control Unit as the Wired
Remote Control, Connect the Wired
Remote Control Unit to this jack with
the Remote Control Cable (supplied).
(Refer to page 19.)
PC control
audio
R
INPUT-3
USB
INPUT-4
R/C jack
This projector uses a micro processor to control the
unit. Occasionally, the micro processor may
malfunction and need to be reset. This can be done
by pressing the RESET button with a pen, which will
shut down and restart the unit. Do not use the
RESET function excessively.
AUDIO OUTPUT JACKS
Connect an external audio
amplifier to these jacks.
(Refer to P14, 15.)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
13
CONNECTING THE PROJECTOR
CONNECTING TO THE COMPUTER
Cables used for connection (✽ = Cables are not supplied with this projector.)
• VGA Cable (HDB 15 pin)
NOTE :
• Control Cable for PS/2 port, Serial port, or ADB port
When connecting the cable, the power cords of
• MAC/VGA Adapter
both the projector and the external equipment
should be disconnected from AC outlet. Turn the
• DVI Cable
projector and peripheral equipment on before the
• BNC Cable (BNC x 5) ✽
computer is switched on.
• Audio Cables (RCA x 2) ✽
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
Desktop type
Monitor Output
Laptop type
Monitor Output Audio Output Serial port
Monitor Output
PS/2 port
ADB port
MAC/VGA
Adapter
Set the slide
switches following
the chart below.
Control Cable Control Cable Control Cable
for Serial Port for PS/2 Port for ADB Port
Audio Cable
(stereo) ✽
BNC Cable ✽
DVI Cable
VGA Cable
Use one of these Control
Cables corresponding
with the terminal of your
computer.
audio
DVI
R
PC control
INPUT-1
serial port IN
L
(mono)
audio
R/Pr
G/Y
B/Pb
H/HV
V
R
PC control
INPUT-2
serial port OUT
L
(mono)
video/Y
C
audio
S-video
L
R
INPUT-3
USB
(mono)
audio OUT
R
analog RGB
L
audio
R
PC control
L
INPUT-4
Terminals of
the Projector
R/C jack
reset
(mono)
(mono)
MAC/VGA ADAPTER
AUDIO OUT
ON
Audio Cable
(stereo) ✽
The Switches of the
MAC/VGA Adapter
ON
DIP
1 2 3 4 5 6
OFF
Audio Input
External Audio Equipment
Set the switches as shown in the table below
depending on the RESOLUTION MODE that you
want to use before your turn on the projector and
computer
Audio Speaker
Audio Amplifier
T
HET
RUS
T
E
DS
OURC
EF
ORPRO
J
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
(stereo)
MODE
14
SWITCHES
1
2
3
4
5
6
13"MODE (640 x 480)
ON
ON OFF OFF OFF OFF
16"MODE (832 x 624)
OFF ON OFF ON OFF OFF
19"MODE (1024 x768)
OFF ON
ON OFF OFF OFF
21"MODE (1152 x 870)
ON
ON
ON
ON OFF OFF
CONNECTING THE PROJECTOR
CONNECTING TO THE VIDEO EQUIPMENT
Cables used for connection
NOTE :
When connecting the cable, the power cords of
both the projector and the external equipment
should be disconnected from AC outlet. Turn the
projector and peripheral equipment on before the
computer is switched on.
• Video Cable (BNC x 1, BNC x 2 or BNC x 3) ✽
• S-VIDEO Cable ✽
• Audio Cable (RCA x 2) ✽
(✽ = Cables are not supplied with this projector.)
Component video output equipment.
Video Source (example)
Video Cassette Recorder
Separate Y/C
Video Output
Y
Component Video Output
Pr/Cr
Y
S-VIDEO Output
Audio Output
Pb/Cb
R
L
C
Video
Cable ✽
Video
Cable ✽
S-VIDEO
Cable ✽
Video
Cable ✽
S-VIDEO
AV AUDIO IN
Pr/Cr-Y-Pb/Cb
Y-C
VIDEO
serial port IN
audio
DVI
R
PC control
L
(mono)
R/Pr
G/Y
B/Pb
H/HV
V
PC control
audio
R
INPUT-2
serial port OUT
Audio Cable
(Stereo) ✽
INPUT-1
Composite
Video Output
(such as DVD player or
high-definition TV source.)
Video Disc Player
L
(mono)
video/Y
C
audio
S-video
R
INPUT-3
USB
L
(mono)
audio OUT
R
L
analog RGB
reset
(mono)
PC control
audio
R
Terminals of
the Projector
L
INPUT-4
R/C jack
(mono)
AUDIO OUT
Audio Cable
(Stereo) ✽
Audio Input
External Audio Equipment
Audio Amplifier Audio Speaker (stereo)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
15
BEFORE OPERATION
SIDE CONTROLS AND INDICATORS
REAR
INDICATORS
SIDE CONTROLS
FRONT
INDICATORS
SIDE CONTROLS
ZOOM BUTTONS
FOCUS BUTTONS
VOLUME BUTTONS
POWER ON–OFF BUTTON
Used to adjust zoom.
(P24)
Used to adjust focus. (P24)
Used to adjust volume.
(P26)
Used to turn the projector
on or off. (P23)
zoom
focus
volume
power
MENU BUTTONS
LENS SHIFT BUTTONS
Used to open or close the
MENU operation. (P20, 21, 22)
SELECT BUTTON
Used to select LENS
SHIFT function. (P24)
lens shift
menu
Used to execute the item
selected. It is also used to
expand the image in
DIGITAL ZOOM mode.
(P34)
input 3/4
select
INPUT 1/2 BUTTON
Used to select input source
either INPUT 1 or INPUT 2.
(P26)
INPUT 3/4 BUTTON
AUTO IMAGE BUTTON
Used to operate AUTO
IMAGE function. (P33)
input 1/2
auto image
normal
Used to select input source
either INPUT 3 or INPUT 4.
(P26)
POINT BUTTONS
NORMAL BUTTON
Used to select an item or
adjust the value in the
MENU. It is also used to
pan the image in DIGITAL
ZOOM mode. (P34)
Used to reset to normal
picture adjustment preset
by factory. (P33, 38)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
16
BEFORE OPERATION
INDICATORS
FRONT INDICATORS
lamp
status
ready
lamp
replace
warning
temp.
LAMP REPLACE INDICATOR
WARNING TEMP. INDICATOR
READY INDICATOR
LAMP INDICATOR
This LAMP REPLACE
indicator lights yellow when
any of Projection Lamps is
nearing its end, and flashes
when any of them becomes
out. Check which lamp
needs to be replaced on
Lamp Status Display. (P44)
This indicator flashes red
when internal projector
temperature is too high.
(P43)
This indicator lights green
when the projector is ready
to be turned on. And it
flashes green in Power
Management mode. (P39)
This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.
lamp
status
ready
warnin
temp. g
lam
replacp
e
REAR INDICATORS
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
17
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
LEFT SIDE
INPUT 1/2 BUTTON
POWER ON-OFF BUTTON
on
Used to select input source
either INPUT 1 or INPUT 2.
(P26)
power
focus
zoom
volume
lock
all off
mute
d.zoom
input 1/2
POINT BUTTON
Used to select MENU
operation. (P20, 21, 22)
menu
input 3/4
SELECT BUTTON
When using the Remote Control
Unit, turn this switch to “ON.” And
turn it to “ALL OFF” when it is not
used.
INPUT 3/4 BUTTON
Used to select input source
either INPUT 3 or INPUT 4.
(P26)
MENU BUTTON
ALL-OFF SWITCH
Used to turn the projector on
or off. (P23)
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P34)
It is also used as a PC
mouse in Wireless Mouse
Operation. (P42)
LASER BUTTON
laser
✽ When pressing the center of this
button, it works as the SELECT
button.
lens shift
RIGHT CLICK BUTTON
keystone
blank
freeze
normal
auto image
Used to operate the laser
pointer function. The laser
beam is emitted while pressing
this button within 1 minute.
When using the laser pointer
for more than 1 minute, release
the button and press it again.
Used to move the pointer on
the MENU, to adjust the item,
or to pan the image in DIGITAL
ZOOM mode. (P34)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P42)
p-timer
Used to compress the image
in DIGITAL ZOOM mode.
(P34)
It is also used as a PC mouse
in Wireless Mouse Operation.
(P42)
P-TIMER BUTTON
Used to operate P-TIMER
function. (P25)
LASER POINTER FUNCTION
This remote control emits a laser beam as the Laser Pointer from the Laser Light Window. When the LASER button is
pressed, the laser light goes on. And when the button is pressed more than 1 minute or the button is released, light goes off.
Laser light is emitted with the RED light which tells the laser beam being emitted.
The laser emitted is a class II laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people. The three marks bellow are the caution labels for the laser beam.
CAUTION : Use of controls or adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.
These caution labels are put on the remote control.
T
HE
T
R
US
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
Laser
Light
Window
18
BEFORE OPERATION
ZOOM BUTTON
power
Used to adjust zoom.
(P24)
focus
zoom
volume
Operating Range
VOLUME BUTTON
lock
Used to adjust volume.
(P26)
FOCUS BUTTON
mute
d.zoom
input 1/2
Used to adjust focus.
(P24)
menu
input 3/4
D.ZOOM BUTTON
Point the remote control toward the
projector (Receiver Window)
whenever pressing the buttons.
Maximum operating range for the
remote control is about 16.4’ (5m)
and 60° in front and rear of the
projector.
Used to select DIGITAL
ZOOM mode and resize
the image. (P34)
60°
LENS SHIFT BUTTON
MUTE BUTTON
Used to select LENS
SHIFT function. (P24)
Used to mute sound. (P26)
FREEZE BUTTON
laser
lens shift
NO SHOW BUTTON
Used to turn the picture
into black image. (P25)
16.4’
(5 m)
Used to freeze the picture.
(P25)
keystone
blank
freeze
NORMAL BUTTON
normal
auto image
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function. (P33)
p-timer
Used to reset to normal
picture adjustments preset
by the factory. (P33, 38)
KEYSTONE BUTTON
16.4’
(5 m)
Used to correct the
keystone distortion.
(P24, 34, 38)
WIRED REMOTE JACK
When using as the Wired
Remote Control, connect the
Remote Control Cable to this
jack. The battery installation
is required when using as the
Wired Remote Control.
60°
REMOTE CONTROL BATTERIES INSTALLATION
1
Remove the battery
compartment lid.
Press the lid downward and slide it.
2
Slide the batteries into
the compartment.
3
Replace the compartment
lid.
Two AA size batteries
For correct polarity (+
and –), be sure the
battery terminals are in
contact with the pins in
the compartment.
To insure safe operation, please observe the following precautions :
● Use (2) AA, UM3 or R06 type alkaline batteries.
● Replace two batteries at the same time.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the Remote Control Unit to moisture, or heat.
● Do not drop the remote control unit.
● If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
19
BEFORE OPERATION
OPERATING ON-SCREEN MENU
HOW TO OPERATE THE ON-SCREEN MENU
You can control and adjust this projector through the
ON-SCREEN MENU. Refer to the following pages to
operate each adjustment in the ON-SCREEN MENU.
WIRELESS REMOTE CONTROL
POINT BUTTON
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
1 MOVING THE POINTER
Move the pointer (see the NOTE below) by pressing POINT
button(s) on the SIDE CONTROL or the REMOTE
CONTROL.
2 SELECT THE ITEM
Select the item by pressing SELECT button.
NOTE : Pointer is the icon on the ON-SCREEN Menu to
select the item. See the figures on the section
"FLOW OF ON-SCREEN MENU" below.
SELECT BUTTON
Used to select the item.
SIDE CONTROL
lens shift
menu
SELECT BUTTON
Used to select the item.
select
auto image
normal
POINT BUTTONS
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
1
MENU BAR
Press MENU button to display the ON-SCREEN MENU
(MENU BAR). The red frame is the POINTER.
Select the Item
2
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT / LEFT
buttons.
3
Select the ITEM by pressing SELECT button. The
dialog box of the ITEM appears.
POINTER
(red frame)
SELECT
BUTTON
ITEM ICON
POINTER
(red frame)
Control and adjust through ON-SCREEN MENU
4
5
Move the POINTER downward by pressing POINT
DOWN button. (The shape of the POINTER becomes
an arrow.)
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for details of respective
adjustments.
MENU
POINT
DOWN
BUTTON
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
POINTER
20
BEFORE OPERATION
MENU BAR
MENU BAR IN COMPUTER MODE
WHEN SELECT THE DVI TERMINAL
INPUT MENU
IMAGE MENU
PC ADJUST MENU
SETTING MENU
Used to select
the Input
source. (Refer
to P26)
Used to adjust the
computer image.
[Fine sync / Total dots /
White Balance / Contrast /
Brightness / Sharpness/
Gamma/Progressive]
(Refer to P32)
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P30, 31)
Used to set the Display
Menu, other functions
setting and reset Lamp
Replacement Monitor
Timer. (Refer to P39-41)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P41)
D-XGA
INPUT SOURCE MENU
SYSTEM MENU
POSITION MENU
SCREEN MENU
SOUND MENU
Used to select a
computer signal type
(Digital or Analog).
Refer to P27
Used to select a
computer system.
(Refer to P28)
Used to adjust the
position of the
image.
(Refer to P33)
Used to adjust the
size of the image or
to correct the
Keystone distortion.
(Refer to P34)
Used to adjust the
sound [Volume,
Bass or Treble], to
select Built-in SP
On-Off and Sound
Mute.
(Refer to P26)
WHEN SELECT THE 5 BNC TERMINAL AND RGB INPUT SELECT
2
RGB
XGA 1
INPUT SOURCE MENU
Used to select a input source
type. (RGB or Y, Pb/Cb, Pr/Cr)
(Refer to P27)
WHEN SELECT THE HDB 15-PIN TERMINAL
4
XGA 1
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
21
BEFORE OPERATION
MENU BAR IN VIDEO MODE
WHEN SELECT THE AV TERMINAL
INPUT MENU
IMAGE MENU
SETTING MENU
Used to select
the Input
source. (Refer
to P26)
Used to adjust the picture image.
[Color / Tint / White Balance / Contrast
/ Brightness/ Sharpness/Gamma /
Noise Reduction / Progressive]
(Refer to P37)
Used to set the Display
Menu, other functions
setting and reset Lamp
Replacement Monitor
Timer. (Refer to P39-41)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P41)
3
SYSTEM MENU
INPUT SOURCE MENU
Used to select a video
source among [Video,
Y/C and S-Video.
(Refer to P35)
Used to select a
color system of the
selected video
source.
(Refer to P36)
SCREEN MENU
Used to set the size
of the image either
Regular or Wide,
or to correct the
Keystone distortion.
(Refer to P38)
SOUND MENU
Used to adjust the
sound [Volume,
Bass or Treble], to
select Built-in SP
On-Off and Sound
Mute.
(Refer to P26)
WHEN SELECT THE 5 BNC TERMINAL AND Y, Pb/Cb, Pr/Cr INPUT SELECT
INPUT SOURCE MENU
SYSTEM MENU
Used to select a input source
type. (RGB or Y, Pb/Cb, Pr/Cr)
(Refer to P35)
Used to select a
component video
signal format.
(Refer to P36)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
22
BASIC OPERATION
TURNING ON / OFF THE PROJECTOR
TURNING ON THE PROJECTOR
1
Complete the peripheral connections (with Computer, VCR, etc.)
before turning on the projector. (Refer to "CONNECTING TO
THE PROJECTOR" on Pages 12~15 for connecting that
equipment.)
2
Connect the projector's AC Power Cord into a wall outlet and
turn the MAIN ON / OFF SWITCH to ON. The LAMP indicator
lights RED, and the READY indicator lights GREEN.
3
Press the POWER ON-OFF button on the Remote Control Unit
or on the Side Control to ON. The LAMP indicator dims, and
the Cooling Fans start to operate. The Preparation Display
appears on the screen and the count-down starts. The signal
from the source appears after 30 seconds.
Lamp status is also displayed on screen for 10 seconds. (Refer
to "LAMP MANAGEMENT" on page 44.)
30
1
3
2
4
LAMP STATUS
The Preparation Display disappears
after 30 seconds.
TURNING OFF THE PROJECTOR
1
Press the power ON-OFF button on the Remote Control Unit or
on the Side Control, and the message "Power off?" appears on
the screen.
2
Press the power ON-OFF button again to turn off the projector.
The LAMP indicator lights bright and the READY indicator turns
off. After approximate 90 seconds, the READY indicator will light
green again and the projector may be turned on by pressing the
power ON-OFF button.
3
The cooling fans will operate for approximate 2 minutes after the
projector is turned off. To power down completely, turn the MAIN
ON/OFF SWITCH to OFF and disconnect the AC power cord.
Power off?
The message disappears after 4 seconds.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST 5
MINUTES BEFORE TURNING IT OFF.
When the Power Management function is ON, the Projector detects the signal interruption and turns the Projection Lamp off
automatically. Refer to “Power Management” on page 39.
When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes
before turning the projector on again.
When the TEMPERATURE WARNING indicator continues to flash, follow procedures below:
1. Turn the MAIN ON / OFF SWITCH to OFF and disconnect the AC power cord from the AC outlet.
2. Check the air filters for dust accumulation.
3. Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 43.)
4. Turn the Projector on again.
If the TEMPERATURE WARNING indicator should still continue to flash, contact the sales dealer where you purchased this
projector or service center.
T
HET
RU
S
T
E
D
S
O
UR
CEfor
F
O
RPR
OJ
E
CT
ORL
A
PSA
ND
AC
CE
S
S
OR
I
E
S
NOTE:
The
Cooling
Fan
may
work
cooling
while
the
projector
isM
turned
off.
When
the
Cooling
Fan
is
working, TEMPERATURE WARNING INDICATOR flashes red.
23
BASIC OPERATION
ADJUSTING THE IMAGE
ZOOM ADJUSTMENT
1
Press the ZOOM ▲/▼ button(s) on the Side Control or on the
Remote Control Unit. The message “Zoom” is displayed.
2
Press the ZOOM ▲ button to make the image larger, and press
the ZOOM ▼ button to make the image smaller.
Zoom
The message disappears after 4 seconds.
FOCUS ADJUSTMENT
1
Press the FOCUS ▲/▼ button(s) on the Side Control or on the
Remote Control Unit. The message “Focus” is displayed.
2
Adjust the focus of the image by pressing the FOCUS ▲/▼
button(s).
Focus
The message disappears after 4 seconds.
LENS SHIFT ADJUSTMENT
1
Press the LENS SHIFT button on the Side Control or on the
Remote Control Unit. The message “Lens shift” is displayed.
2
Press the POINT UP button to move the image up, press the
POINT DOWN button to move the image down, press the POINT
LEFT to move the image left and press the POINT RIGHT to
move the image right.
Lens shift
The message disappears after 4 seconds.
KEYSTONE ADJUSTMENT
If the picture has keystone distortion, correct image with KEYSTONE adjustment.
1
Press the KEYSTONE ▲/▼ button on the Remote Control Unit
or select the Keystone on the SCREEN menu. (Refer to page
34, 38.) The message “Keystone” is displayed.
2
Correct the Keystone distortion by pressing the KEYSTONE
▲/▼ button or the POINT UP/DOWN button(s). Press the
KEYSTONE ▲ button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE ▼ button or
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE ▲
button or the POINT UP button.
Keystone
The message disappears after 4 seconds.
Reduce the lower width with the KEY STONE ▼
button or the POINT DOWN button.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
24
BASIC OPERATION
BLANK FUNCTION
Press the BLANK button on the Remote Control Unit to black
out the image. This function is cancelled when the BLANK
button is pressed again or any other function button is pressed.
Blank
The message disappears after 4 seconds.
PICTURE FREEZE FUNCTION
Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. This function is
cancelled when the FREEZE button is pressed again or any other function button is pressed.
P-TIMER FUNCTION
Press the P-TIMER button on the Remote Control unit. The
timer display “00 : 00” appears on the screen and the timer
starts to count the time (00 : 00 ~ 59 : 59).
To stop the P-TIMER, press the P-TIMER button. And then,
press the P-TIMER button again to cancel the P-TIMER
function.
SOUND ADJUSTMENT
DIRECT OPERATION
Indicates the roughly level
of the volume.
Sound Volume Adjustment
Press the VOLUME (+/–) button(s) on the Side Control or on the
Remote Control Unit to adjust the volume. The Volume dialog box
appears on the screen for a few seconds.
(+) button to increase the volume, and (–) button decreasing.
Sound Mute Setting
Press the MUTE button on the Remote Control Unit to cut off the
sound. To restore the sound to its previous level, press the MUTE
button again or press Volume (+/–) button(s).
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
25
BASIC OPERATION
MENU OPERATION
1
2
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SOUND and press the SELECT button. Another dialog box
SOUND ADJUST Menu will appear.
Indicate the roughly
level of the item.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to select by
pressing the POINT UP/DOWN buttons.
Move the arrow to ▲
or ▼ and press the
SELECT button.
Volume
Move the arrow to ▲ or ▼ of "Volume" by pressing the POINT UP/
DOWN buttons. To increase the volume, point the arrow to ▲ and
then press the SELECT button. To decrease the volume point the
arrow to ▼ and then press the SELECT button.
Move the arrow to
the item and then
press the SELECT
button.
Treble
To adjust the Treble sound, point the arrow to ▲ or ▼ of "Treble" and
then press the SELECT button.
Close the Sound Menu.
Bass
To adjust the Bass sound, point the arrow to ▲ or ▼ of "Bass" and
then press the SELECT button.
Built-in SP.
To disconnect the built-in speaker, point the arrow to Built-in SP. and
then press the SELECT button. The Built-in SP. display is changed Off
from On and Internal speaker is disconnected.
Mute
To cut off the audio sound, point the arrow to "Mute" and then press
the SELECT button. The Mute display is changed On from Off and
the sound is cut off. To restore the sound to its previous volume level,
set the Mute to Off.
SELECTING INPUT SOURCE
DIRECT OPERATION
Select INPUT source by pressing the INPUT 1/2 and INPUT
3/4 button on the side Control or on the Remote Control Unit.
INPUT 1/2 button
INPUT 3/4 button
INPUT 1
INPUT 3
INPUT 2
INPUT 4
MENU OPERATION
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select Input
and press the SELECT button. Another dialog box INPUT
SELECT Menu will appear.
D-XGA
T
HET
R
US
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
the POINT DOWN button and a red-arrow icon will
2 Press
appear. Move the arrow to the INPUT source that you want to
select, and then press the SELECT button.
26
COMPUTER MODE
SELECTING COMPUTER SYSTEM
WHEN SELECT THE INPUT 1 (DVI SLOT )
When connecting to the computer, select a computer signal type
(Digital or Analog) in INPUT SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the INPUT source that you want to
select, and then press the SELECT button.
D-XGA
WHEN SELECT THE INPUT 2 (5 BNC SLOT )
When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
1
2
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
RGB
XGA 1
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "RGB", and then press the SELECT
button.
RGB
When connect the computer output [5 BNC Type (Red, Green,
Blue, Horiz. Sync and Vert. Sync.)] from the computer to the
R/Pr, G/Y, B/Pb, H/HV and V jacks.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
27
COMPUTER MODE
AUTOMATIC MULTI-SCAN SYSTEM
This projector automatically tunes to most different types of
computers based on VGA, SVGA, XGA or SXGA (refer to
“COMPATIBLE COMPUTER SPECIFICATION” on page 29).
When selecting Computer, this projector automatically tunes to
the incoming signal and projects the proper image without any
special settings. (Setting of the Computer System may be
required when connecting some computers.)
SYSTEM BOX
Display the SYSTEM being selected.
SYSTEM
Analog
When select the DVI terminal.
SYSTEM
Note : The projector may display one of the following messages.
Go to PC adj. The projector cannot discriminate or detect the input
signal from the computer. Adjust and set the
computer system manually.
No signal
There is no signal input from the computer. Make
sure the connection of the computer and the
projector is set correctly.
XGA 1
RGB
XGA 1
When select the 5 BNC terminal.
4
XGA 1
When select the HDB 15-PIN terminal.
D-VGA, D-SVGA, D-XGA, D-SXGA 1, D-SXGA 2 or D-SXGA 3
The input signal is digital from the DVI terminal.
CURRENT MODE DISPLAY
The Current Mode display appears to show the information of the
computer being selected.
SELECT COMPUTER SYSTEM MANUALLY
To set the Computer system manually, select the mode on the
ON-SCREEN MENU.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button. Another dialog box
COMPUTER SYSTEM Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the system that you want to set, and
then press SELECT button.
Providing the information of the
computer detected by the
projector.
The systems on this dialog
box can be selected.
When this mark is
displayed as black, more
computer system modes
will be available. Move
the arrow to this mark and
then press the SELECT
button, and the other
modes will be displayed.
Close the
SYSTEM Menu.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
28
COMPUTER MODE
COMPATIBLE COMPUTER SPECIFICATIONS
Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and
less than 202 MHz of Dot Clock.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
RGB
RGB
480P
575P
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
(Interlace)
––––––––
(Interlace)
––––––––
(Progressive)
––––––––
(Progressive)
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
(Interlace)
H-Freq.
(kHz)
V-Freq.
(Hz)
ON-SCREEN
DISPLAY
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.734
15.625
31.47
31.25
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.47
60.31
48.50
44.00
63.48
36.00
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
30
25
60
50
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
43.59
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA15
MAC 19
MAC 21
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
MAC
MAC
HDTV720p
HDTV1035i
HDTV1080i
HDTV1080i
RESOLUTION
1024 x 768
1024 x 768
1024 x 768
(Interlace)
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
(Interlace)
1280 x 1024
(Interlace)
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
(Interlace)
1280 x 1024
1280 x 1024
1280 x 960
1280 x 1024
––––––––
(Progressive)
––––––––
(Interlace)
––––––––
(Interlace)
––––––––
(Interlace)
H-Freq.
(kHz)
V-Freq.
(Hz)
62.04
61.00
35.522
46.90
47.00
58.03
60.24
68.68
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
75.00
80.00
45.00
33.75
33.75
31.25
77.07
75.70
43.48
58.20
58.30
72.0
75.08
75.06
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
43.00
47.00
60.01
72.00
66.00
43.35
60.18
85.024
75.08
75.08
60.00
30.00
30.00
25.00
When the input signal is digital from the DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
RESOLUTION
H-Freq.
(kHz)
V-Freq.
(Hz)
ON-SCREEN
DISPLAY
RESOLUTION
H-Freq.
(kHz)
V-Freq.
(Hz)
D-VGA
D-SVGA
D-XGA
640 x 480
800 x 600
1024 x 768
31.469
37.879
48.363
59.940
60.317
60.004
D-SXGA 1
D-SXGA 2
D-SXGA 3
1280 x 1024
1280 x 1024
1280 x 1024
63.981
60.276
31.65
60.020
58.069
29.8
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
NOTE : Specifications are subject to change without notice.
29
COMPUTER MODE
PC ADJUSTMENT
This Projector can automatically tune to the display signals from most personal computers currently distributed.
However, some computers employ special signal formats which are different from the standard ones and may
not be tuned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce a proper
image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered
picture or a skewed picture.
This projector has a PC ADJUSTMENT function to enable you to precisely adjust several parameters to match
with those special signal formats. This projector has 8 independent memory areas to memorize those
parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use
it.
NOTE: This PC ADJUSTMENT function cannot be operated when the input signal is digital from the DVI terminal or “RGB” is
selected on the SYSTEM MENU (P28 and 29).
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT RIGHT/LEFT button to select PC
ADJUST and press the SELECT button. Another dialog box
“Where to reserve” Menu will appear.
2
In this dialog box, you can store the parameter into the area from
“Mode 1” to “Mode 8.” When memorizing the new computer
parameter, select the Mode with the message “Free” by pressing
the POINT UP/DOWN button and the SELECT button. To
change the parameters of the Mode previously set, select the
Mode with “Stored.”
3
When the Mode is selected, Parameter adjustment dialog box
appears. Move the arrow to the item that you want to change by
pressing the POINT UP/DOWN button, and adjust each item by
pressing the SELECT button to match with your computer.
4
Move the arrow to “Stored” and press the SELECT button. The
parameter is memorized in the selected Mode.
5
To activate the Mode manually adjusted in this PC
ADJUSTMENT Menu, select the Mode at the SYSTEM SELECT
Menu. (Refer to page 28.)
This Mode has
parameters being
stored.
The Vacant Mode.
Manual set Computer
Mode (1 to 8).
Close the PC
ADJUSTMENT Menu.
▼E
and
press
SELECT
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACC
S
S
OR
I
E
S
Move the arrow to ▲ or
button.
30
COMPUTER MODE
Total lines
The number of the total vertical lines. Adjust the number to match
the image of your personal computer.
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match the image of your computer.
Horizontal / Vertical
Adjustment of the horizontal or vertical picture position. When the
image is not centered on the screen, adjust each of those items.
Clamp
Adjustment of the clamp level. When the image has a dark bar(s),
try this adjustment.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
Press the SELECT button at this
column to adjust “Clamp”, “Fine
sync,” “Display area”, “Horiz.
scale” or “Vert. scale” .
Display area
Adjustment of the area displayed with this projector. Select the
resolution at the Display area dialog box, or adjust the number at the
column of “H” or “V” to match the resolution of the image.
Horizontal Scale / Vertical Scale
Adjustment of the horizontal height or vertical width of the image.
NOTE : The Display area, the Horiz. scale and the Vert. scale
cannot be adjusted when “480p”, “575p”, “HDTV720p”,
“HDTV1035i” or “HDTV1080i” is selected on the SYSTEM
MENU (P28 and 29).
Each of the keys operates as follow.
Reset
Mode free
Stored
Quit
Recalls the parameter data that was previously
adjusted.
Clears the parameter data previously set.
Stores the parameters in the memory.
Point the arrow at the Display area and press
the SELECT button. The Display area dialog
box appears.
Closes the PC ADJUST Menu.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
31
COMPUTER MODE
PICTURE IMAGE ADJUSTMENTS
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can
be set by pressing the NORMAL button.
Move the arrow to the level
and press the SELECT
button.
The level being selected.
Real
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box.
When selecting “▼” the custom setting dialog box will appear. Move
the arrow to the item that you want to change by pressing the POINT
UP/DOWN button, and adjust each value by pressing the SELECT
button to match with the image.
Press the SELECT button
at “▼” to adjust the picture
level manually.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Point to ▼ to
lighten the color and select ▲ to deepen the color. (From 0 to 63.)
Contrast
Point to ▼ to decrease contrast, and select ▲ to increase contrast.
(From 0 to 63.)
Move the arrow to
▲ or ▼ and press
SELECT button.
Brightness
Point to ▼ to adjust the image darker, and select ▲ to adjust
brighter. (From 0 to 63.)
Sharpness
Point to ▼ to soften the image, and select ▲ to sharpen the image.
(From 0 to 15.)
Gamma
Point to ▼ or ▲ to obtain better balance of contrast. (From 0 to 16.)
Progressive
Set “On” to provide progressive scan mode.
Each of the keys operates as follow.
Close the PICTURE IMAGE
ADJUSTMENT Menu.
Press the SELECT
button to set the
function “On” or “Off”.
NOTE : The Fine sync and the Total dots cannot
be operated when the input signal is digital
from DVI terminal or “RGB” is selected on
the SYSTEM MENU (P28 and 29).
The Progressive cannot be selected when
the input signal is digital from DVI terminal
or “480p”, “575p” or “HDTV720p” is
selected on the SYSTEM MENU (P28 and
29).
Reset
Recalls the data previously adjusted.
T
HET
RU
S
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
Stored
Quit
32
Stores the adjusted data in the memory.
Closes the PICTURE IMAGE ADJUSTMENT Menu.
COMPUTER MODE
NORMAL FUNCTION
The normal picture level is preset on this projector at the
factory and can be restored anytime you press the NORMAL
button (located on the Side Control or on the Remote Control
Unit). The “Standard” display will be displayed on the screen
for a few seconds.
Standard
PICTURE POSITION ADJUSTMENT
The position of the image can be adjusted vertically and horizontally through PICTURE POSITION
ADJUSTMENT.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
POSITION and press the SELECT button. The PICTURE
POSITION dialog box will appear.
2
Select the arrow to the direction (described as , ,
or )
that you want to adjust by pressing the POINT UP/DOWN/
LEFT/RIGHT buttons, and then press the SELECT button.
Each of the keys operates as follow.
Reset
Recalls the setting data previously set.
Stored
Stores the setting data in the memory.
Quit
Select the arrow to the
direction (described as
,
,
or
),and
then press the SELECT
button.
Closes the PICTURE POSITION Menu.
AUTO IMAGE FUNCTION
The AUTO IMAGE function cannot be operated when the input signal is digital from DVI terminal or "RGB",
"480p", "575p", "HDTV720p", "HDTV1035i" or "HDTV1080i" is selected on the SYSTEM SELECT menu.
Press the AUTO IMAGE button on the Side Control or on the Remote Control Unit to automatically adjust Fine
sync., Total dots and Screen position for most computers. It will take about 10 seconds.
NOTE: Some computers may not be fully adjusted with the "Auto Image Function". In that case, use the
"Picture Image" and/or "Picture Position" adjustments (P32, 33) to make fine-adjust then after the "Auto
Image Function" is executed.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
33
COMPUTER MODE
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT button. Another dialog box
PICTURE SCREEN Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT button.
True
To make the image into its original size, select True in the dialog box.
When the original image size is larger than the screen size (1024 x
768), the image can be panned by pressing the POINT
UP/DOWN/LEFT/RIGHT buttons.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. The ON-SCREEN menu and SCREEN ADJUST menu
disappears and the message “Keystone” is displayed. Correct the
Keystone distortion by pressing the KEYSTONE ▲/▼ button or the
POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT
on page 24.
Digital Zoom
To adjust the image size or pan the image, select Digital zoom in the
dialog box. The ON-SCREEN menu and SCREEN ADJUST menu
disappears, and the magnifying glass icon and the message “D.
Zoom” is displayed.
This projector also enters Digital Zoom mode by pressing the
D.ZOOM ▲/▼ button on the Remote Control Unit.
Move the arrow to the
function and press the
SELECT button.
NOTE
● The True and the Digital Zoom cannot be
operated when “RGB”, “480p”, “575p”,
“HDTV720p”, “HDTV1035i” or “HDTV1080i” is
selected on the SYSTEM MENU (P28 and 29).
● This projector cannot display any resolution
higher than 1280 X 1024. If your computer’s
screen resolution is higher than 1280 X 1024,
reset the resolution to the lower before
connecting the projector.
● The image data in other than XGA (1024 x 768)
is modified to fit the screen size in the initial
mode.
● The normal "Panning Operation" may not
function properly if the computer system
prepared with the "PC Adjust" is used.
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM ▲ button or the
SELECT button. The image is magnified by degrees.
Compress function
To compress the image size, press the D.ZOOM ▼ button or the
RIGHT CLICK button. The size of image is reduced by degrees.
Panning function
To pan the image, press the POINT UP/DOWN/LEFT/RIGHT
buttons. Panning function can work only when the image is larger
than the screen size.
To cancel Digital Zoom mode, press any button except D.ZOOM
▲/▼, SELECT, RIGHT CLICK, or POINT button. To adjust the image
to 1024 x 768, press NORMAL button.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
34
VIDEO MODE
SELECTING VIDEO SOURCE
WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )
When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "Y, Pb/Cb, Pr/Cr" and then press the
SELECT button.
Y, Pb/Cb, Pr/Cr
When connect the component video output (Cr, Y, Cb or Pr, Y,
Pb) from the video equipment to the R/Pr, G/Y and B/Pb jacks.
WHEN SELECT THE INPUT 3 (AV TERMINAL )
When connecting to those equipment, select the type of Video
source in VIDEO SOURCE Menu.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select VIDEO
SOURCE and press the SELECT button. Another dialog box
VIDEO SOURCE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the source that you want to select,
and then press the SELECT button.
Video
When connect the composite video output from the video
equipment to the VIDEO/Y jack, select "Video" in VIDEO
SOURCE Menu.
Y/C
When connect the separate Y/C video output from the
video equipment to the VIDEO/Y and C jacks, select
"Y/C" in VIDEO SOURCE Menu.
S-Video
When connect the S-Video output from the video
equipment to the S-Video jack, select "S-Video" in
VIDEO SOURCE Menu.
This box indicates the
Video source being
selected.
3
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
35
VIDEO MODE
SELECTING COLOR SYSTEM
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SYSTEM and press the SELECT button. Another dialog box
VIDEO SYSTEM Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "Auto", and then press the SELECT
button.
WHEN SELECT THE INPUT 3 (AV TERMINAL )
Auto
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M or PAL-N, select the system
manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce the proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
This box indicates the
system being selected.
Move the arrow to
the Mode and press
the SELECT button.
WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )
Auto
The projector automatically detects the incoming Video signal, and
adjusts itself to optimize its performance.
This box indicates the
system being selected.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce the proper video image, it is
necessary to select a specific component video signal format among
480i, 575i, 480p, 575p, 720p, 1035i, 1080i-50 and 1080i-60.
Move the arrow to
the Mode and press
the SELECT button.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
36
VIDEO MODE
PICTURE IMAGE ADJUSTMENT
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the function that you want to select
and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can
be set by pressing the NORMAL button.
Move the arrow to the item
and press the SELECT
button.
The level being selected.
Cinema
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box.
When selecting “▼” the custom setting dialog box will appear. Move
the arrow to the item that you want to change by pressing the POINT
UP/DOWN button, and adjust each value or change the setting On or
Off by pressing the SELECT button to match with the image.
Press the SELECT button
at “▼” to adjust the picture
level manually.
Color
Point to ▼ button to lighten the image, and select ▲ to deepen the
image. (From 0 to 63.)
Tint
Point to ▼ button to increase purple, and select ▲ to increase green.
(From 0 to 63.)
Move the arrow to ▲
or ▼ and press
SELECT button.
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Point to ▼ to
lighten the color and select ▲ to deepen the color. (From 0 to 63.)
Contrast
Point to ▼ button to decrease contrast, and select ▲ to increase
contrast. (From 0 to 63.)
Brightness
Point to ▼ button to darken the image, and select ▲ to brighten the
image. (From 0 to 63.)
Sharpness
Point to ▼ button to soften the image, and select ▲ to sharpen the
image. (From 0 to 31.)
Gamma
Point to ▼ or ▲ to obtain better balance of contrast. (From 0 to 16.)
Noise reduction
Set “On” to reduce the noise (rough parts) of the image.
Progressive
Set “On” to provide progressive scan mode.
Each of the keys operates as follow.
Closes the PICTURE IMAGE
ADJUSTMENT Menu.
Press the SELECT
button to set the
function “On” or “Off”.
NOTE :
The Noise Reduction cannot be operated when the
video signal types and systems as follow.
● Composite video signal (SECAM, NTSC4.43,
PAL-M and PAL-N systems).
● Y/C separate video and S-video signal (SECAM,
PAL-M and PAL-N systems).
● Component video signal.
The Progressive cannot be operated when “480p”,
“575p” or “720p” is selected on the SYSTEM
MENU (P36).
T
HReset
ET
RUS
T
E
Dthe
S
O
UR
CEF
O
RPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
Recalls
data
previously
adjusted.
Stored
Quit
Stores the data in the memory.
Closes the PICTURE IMAGE ADJUSTMENT Menu.
37
VIDEO MODE
NORMAL FUNCTION
The normal picture level is preset on this projector at the
factory and can be restored anytime you press the NORMAL
button (located on the Side Control or on the Remote Control
Unit). The "Standard" display will be displayed on the screen
for a few seconds.
Standard
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT button. Another dialog box
PICTURE SCREEN ADJUSTMENT DISPLAY will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the screen size that you want to set,
and then press the SELECT button.
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspect ratio.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. Correct the Keystone distortion by pressing KEYSTONE ▲/▼
button or POINT UP/DOWN button(s). Refer to KEYSTONE
ADJUSTMENT on page 24.
Move the pointer to the function and
press the SELECT button.
NOTE : The Regular and the Wide cannot be
operated when “720p”, “1035i”, “1080i-50”
or “1080i-60” is selected on the SYSTEM
MENU (P36).
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
38
SETTING
SETTING MENU
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING and press the SELECT button. Another dialog box
SETTING Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it (For example "On" or
"Off").
Blue back
When this function is “On” this projector will produce a blue image
instead of the video noise on the screen when the input source is
unplugged or turned off.
Display
This function decides whether to display the On-Screen Displays.
On1 ··· shows all the On-Screen Displays.
On2 ··· shows the On-Screen Displays except the Preparation
Display (Our Logo).
Off ···· sets the On-Screen Displays disappeared except;
● ON SCREEN MENU
● “Power off?” message
● P-TIMER
Ceiling
Set the Pointer to the item
and press the SELECT
button.
Ceiling function
When this function is “On” the top / bottom and the left / right
reversed picture is provided to project the image from a ceiling
mounted projector.
Rear
When this function is “On” the left / right reversed picture is provided
to project the image to a rear projection screen.
Rear function
Split wipe
Turn this function “On” in the SETTING menu. The picture will
change into next one by sliding black image side ways like drawing
the black curtains when the input source is turned into another one.
Power management
This function turns the Projection Lamp off when the projector detects signal interruption
and the projector is not used for a certain period in order to reduce power consumption
and maintain the Lamp-life. (This projector is shipped with this function ON.)
Power Management function operates to turn the Projection Lamp off when the input
signal is interrupted and the projector is not operated over 5 minutes. This function
operates as follows;
1. When the signal is interrupted, “No signal” and the counting down (5 minutes)
display appears.
2. When the Projection Lamp turned off, the READY indicator turns off.
3. After 90 seconds, the READY indicator flashes and the Lamp can be turned on
again (Power Management mode).
In this Power Management mode, the Projection Lamp is automatically turned on
when the input signal connected or the projector is operated with any button on the
Side Control or the Remote Control.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
Time left until Lamp off.
39
SETTING
On start
When this function is “On” the projector is automatically turned on just by switching the MAIN ON / OFF SWITCH on.
NOTE: Be sure to turn the projector off properly (refer to the section “TURNING OFF THE PROJECTOR” on page 23). If
the projector is turned off in the wrong steps, the On Start function does not operate properly.
Lamp Mode
This Projector is equipped with 4 Projection Lamps and the number of using lamps can be switched to 4 lamps or 2 lamps.
Using 2 lamps maintains the life of the Projection Lamps.
To change over Lamp Mode
1. Press the MENU button the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select
SETTING and press the SELECT button. Another dialog box SETTING MENU will appear.
2. Press the POINT DOWN button and move a red-arrow icon to Lamp Mode. Set "4 lamps mode" or "2 lamps mode" by
pressing the SELECT button. When Lamp Mode is set from "4 lamps mode" to "2 lamps mode," the image becomes
little darker. When Lamp Mode is set from "2 lamps mode" to "4 lamps mode," the image become brighter gradually.
NOTE : After changing Lamp Mode, it cannot be switched again for 90 seconds.
USB
This Projector is equipped with USB port for interactive operation between the projector and the computer. Set the mode
following steps below.
Wireless Mouse mode
Select "
" when controlling the computer with the Remote Control of this projector.
Projector mode
Select "
" when controlling the projector with the computer.
NOTE: Before you control the projector by computer, install USB driver (optionally sold parts) and set up the computer
following instruction in the USB driver package. Contact your authorized dealer.
Remote control
This projector has two different remote transmit codes; the factory-set normal code (Mode 1) and the secondary code
(Mode 2). This switching function prevents the remote control operation mixture (jam) when operating several projectors
or video equipment together.
When operating the projector in “Mode 2” both projector and Remote Control must be switched to “Mode 2”.
To change the code of the projector;
Set the Remote control in the SETTING menu to “Mode 2”.
To change the code of the Remote Control;
Press both the MENU and the NORMAL buttons on the Remote Control together for over 10 seconds.
After changing the code, make sure the Remote Control operates properly.
To return to the normal code (Mode 1), operate both projector and Remote Control in the ways above again.
NOTE: When the ALL-OFF switch on the Remote Control Unit is turned to "ALL-OFF" the remote transmit code
automatically returns to the normal code (Mode 1).
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
40
SETTING
Lamp replacement monitor timer
Be sure to reset the Lamp Replacement Monitor Timer when the Lamp Assembly is replaced. When the Lamp
Replacement Monitor Timer is reset, the LAMP REPLACEMENT indicator stops lighting.
1
Turn the projector on, and press the MENU button and the ONSCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to
select SETTING and press the SELECT button. Another dialog box
SETTING MENU will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to “Lamp age” and then press the SELECT button.
3
Move the arrow to replaced lamp number and then press the SELECT
button. The message "Lamp replace monitor Reset?" is displayed.
NOTE: Be sure to reset correct lamp number otherwise LAMP
REPLACEMENT indicator continues lighting.
4
Select [Yes] to reset the Timer.
Do not reset the Lamp Replacement Monitor Timer, except after the lamp is
replaced.
SELECTING LANGUAGE
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT buttons to select
LANGUAGE and press the SELECT button. Another dialog box
LANGUAGE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to set,
and then press the SELECT button.
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
41
APPENDIX
OPERATING WIRELESS MOUSE
The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse
for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse
operation.
The wireless mouse is available only when PC mouse pointer is displayed on the screen. When the menu or
the indicator of the projector is displayed on the screen instead of the PC mouse pointer, the wireless mouse
cannot be used.
INSTALLATION
To use the Wireless Remote Control Unit as the Wireless Mouse for a Personal Computer, installation of the
mouse driver (not supplied) is required. Make sure that the mouse driver is properly installed in your computer.
And make sure that the mouse port of the computer connected to Control Port is activated.
1
Connect the mouse port of your computer to the Control Port of
the projector with the Control Cable. (Refer to page 12 to 15 for
connection.)
2
Turn the projector on first, and then turn on your computer.
When the computer is switched on first, the Wireless Mouse may
not work properly.
Note : When the computer has no
mouse port, connect the Serial
Port of the computer to Control
Port of the projector with the
Control Cable for Serial Port.
USING USB TERMINAL
USB Terminal can be also used as control port for wireless mouse operation. Connect the USB terminal of the
computer to USB terminal of this projector with the USB cable (not supplied). In this operation, selecting
Wireless Mouse Mode on SETTING Menu is required. (Refer to P40).
OPERATING WIRELESS MOUSE
When controlling the pointer of the computer, operate the Wireless Mouse with POINT button, SELECT button,
and RIGHT CLICK button on the Wireless Remote Control Unit.
POINT button
POINT button (Move the pointer)
Used to move the pointer. The pointer is moved corresponding with
the direction you are pressing.
SELECT (LEFT CLICK) button
This button has the same function as the left button in a PC mouse.
RIGHT CLICK button
This button has the same function as the right button in a PC mouse.
Pressing this button does not affect any operation when in Menu
mode.
SELECT button
(left button of the
mouse)
RIGHT CLICK button
(right button of the mouse)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
42
APPENDIX
MAINTENANCE
TEMPERATURE WARNING INDICATOR
The TEMPERATURE WARNING Indicator flashes red when the internal temperature of the projector exceeds
the normal temperature. The Indicator stops flashing when the temperature of the projector returns to normal.
When the TEMPERATURE WARNING Indicator continues to flash, check the items listed below.
1
2
3
The Ventilation slots of the projector may be blocked. In such an event, reposition the appliance so that the ventilation
slots are not obstructed.
Air filters may be clogged with dust particles. Clean the air filters by following the section AIR FILTER CARE AND
CLEANING below.
If the TEMPERATURE WARNING Indicator remains on after performing the above checks, the Cooling Fans or the
Internal Circuits may be malfunctioning. Contact service a personnel from an authorized dealer or service station.
AIR FILTER CARE AND CLEANING
The Removable Air Filter prevents dust from accumulating on the surface of the Projection Lens and the
Projection Mirror. Should the Air Filter become clogged with dust particles, it will reduce the Cooling Fans'
effectiveness and may result in internal heat build up and adversely affect the life of the projector.
Clean the Air Filter following the steps below:
1
Turn the power off, and disconnect the AC power cord from the
AC outlet.
2
Pull out the air filter from the projector.
3
Pulling up the center frame of the air filter top, separate the air
filter top and sponge from the air filter base.
4
Clean the each parts with brush or wash out the dust and
particles. Be sure to dry them out.
5
AIR FILTER
Assemble the sponge and the air filter and replace the air filter to
the projector.
AIR FILTER
TOP
CAUTION
Do not operate the projector with the Air Filter removed.
Dust may accumulate on the LCD Panel and the Mirror
degrading picture quality.
Do not put small parts into the Air Intake Vents. It may
result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Usage in these environments may
cause poor image quality.
AIR FILTER
BASE
SPONGE
When using under dusty or smoky conditions, dust may accumulate
on the liquid crystal panel, lens, or optical elements inside it. This
condition may degrade the quality of the projected image.
When the above symptoms are noticed, contact your authorized
dealer or service station for proper cleaning.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
43
APPENDIX
LAMP MANAGEMENT
This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp
Management Function. Lamp Management Function detects the status of all lamps and shows the status on screen or on
the LAMP REPLACE indicator. This function also automatically controls the Lamp Mode when any of lamps is out for the
end of life or malfunctions.
LAMP REPLACE
INDICATOR
Lamp Replace Indicator
This LAMP REPLACE indicator lights yellow when any of Projection Lamps is nearing its end, and flashes when any of them
becomes out. Check the number of the lamp on Lamp Status Display and replace the lamp.
Lamp Status Display
Lamp Status Display appears on the screen when power switch is on or Menu Bar is displayed. This shows the status of
each lamp as; ON, OFF, NEAR END, or OUT. Refer to the following for each status.
1
2
3
4
LAMP STATUS
DISPLAY
Yellow Lamp
The Projection Lamp lights normally.
Dim Lamp
The Projection Lamp is turned off.
Red Lamp
The Projection Lamp is nearing its end. When the image
becomes darker or the color becomes unnatural, replace the
lamp. (The LAMP REPLACE indicator lights yellow.)
X Mark on Lamp
The Projection Lamp is out and needs to be replaced.
(The LAMP REPLACE indicator flashes yellow.)
Lamp Mode Changeover
Lamp Management Function automatically changes the combination of lighting lamp (Lamp Mode) by detecting the status of
lamp. When any of 4 lamps becomes out, the Lamp Mode is changed over from 4 lamps to 2 lamps. And when any of 2
lamps are out, the projector operates with 1 lamp. Lamp Mode can be switched to 4 lamps or 2 lamps manually. Refer to
SETTING section on page 39, 40.
1
3
1
3
1
3
2
4
2
4
2
4
T
HET
RU4S
T
E
DS
OURCEF
ORPR
OJ
E
CT
ORL
AMPSAN1D
ACCE
S
S
ORI
E
S
LAMP MODE
LAMP MODE
2 LAMP MODE
(Example)
44
(Example)
APPENDIX
LAMP REPLACEMENT
CAUTION
● For continued safety, replace with a lamp assembly of the same type.
● Allow the projector to cool for at least 45 minutes before you open the lamp cover. The inside of the projector can
become very hot.
● Do not drop the lamp assembly or touch the glass bulb! The glass can shatter and may cause injury.
Follow these steps to replace the lamp assembly.
1
Check the number of lamp to be replaced on Lamp Status
Display.
2
Turn off the projector and disconnect the AC Power Cord. Allow
the projector to cool down for at least 45 minutes.
3
Remove the two screws on the Lamp Cover and press the
button to open the Lamp Cover. (See right figure.)
4
Loosen the two screws and pull out the Lamp Assembly to be
replaced by grasping the handle.
5
Replace the Lamp Assembly with a new one and tighten the two
screws. Make sure the Lamp is set properly
BUTTON
LAMP
COVER
SCREWS
SCREWS
6
Replace the Lamp Cover and tighten the two screws.
7
Connect the AC Power Cord to the projector and turn the
projector on.
8
Reset the Lamp Replacement Monitor Timer. (Refer to the
section "Lamp Replacement Monitor Timer" on page 41.)
LAMP 3
LAMP 1
LAMP 4
LAMP 2
NOTE : Do not reset the LAMP REPLACEMENT MONITOR
TIMER when the lamp is not replaced.
Make sure which number of lamp needs to be
replaced on Lamp Status Display.
Figure shows the case of replacing the LAMP 2.
CAUTION : Do not operate the projector while any of lamps is removed.
It may result in malfunctions, fire hazard, or other
accidents.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering the Lamp, give the following
information to the dealer.
● Model No. of your projector : Pro AV 9350
● Replacement Lamp Type No. : POA-LMP29 (Proxima Lamp No.: LAMP-XXX)
(Service Parts No. 610 284 4627)
CLEANING THE PROJECTION LENS
Follow these steps to clean the projection lens:
1
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.
Lightly wipe the cleaning cloth over the lens.
2T
H
ET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
When the projector is not in use, replace the lens cover.
3
45
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service station for assistance, check the items below once again.
1. Make sure you have connected the projector to your equipment as described in section "CONNECTING THE
PROJECTOR" on pages 12 ~ 15.
2. Check cable connections. Verify that all computer, video and power cords are properly connected.
3. Verify that power is switched on.
4. If the projector still does not display an image, re-start the computer.
5. If the image still does not display, unplug the projector from the computer and check the computer monitor's display.
The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector,
remember to turn the computer and monitor off before you power up the projector. Power the equipment back up in
order of: Projector and computer)
6. If the problem still exists, check the following chart.
Problem:
No power.
Try these Solutions:
●
●
●
●
●
Plug the projector into an AC outlet.
Turn the MAIN ON/OFF switch to ON.
Press the POWER ON/OFF switch to ON.
Be sure the READY INDICATOR light is ON.
Wait 90 seconds after the projector is turned OFF before turning the projector
back on.
NOTE: After pressing the POWER ON/OFF button to OFF. The projector functions
as indicated.
1. The LAMP POWER indicator will light and the READY indicator will turn off.
2. After 90 seconds, the READY indicator will light green again and the projector
may be turned on by pressing the POWER ON/OFF button.
● Check temperature warning indicator. If the indicator flashes red, the projector
cannot be turned on.
(See "BASIC OPERATION" section on page 23).
● Check the projection lamp.
● Replace the lamp cover. (Check the interlock switch inside of the lamp cover.)
Image is out of focus.
● Adjust the focus.
● Check the projection lens to see if it needs cleaning.
NOTE: Moving the projector from a cool temperature location to a warm
temperature location may result in moisture condensation on the lens. In
such an event, leave the projector OFF and wait until condensation
disappears.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
46
APPENDIX
Problem:
Try these Solutions:
Picture is L/R Reversed.
Check Ceiling/Rear feature.
(See "SETTING" section on page 39).
Picture is T/B inverted.
Check Ceiling feature.
(See "SETTING" section on page 39).
Some displays are not seen
during the operation.
Check Display feature.
(See "SETTING" section on page 39).
●
●
●
●
No sound.
Remote control unit does not
work.
Wireless mouse function
does not work.
Check audio cable connection from audio input source.
Adjust audio source.
Press the VOLUME (+) button.
Press the MUTE button.
● Check the batteries.
● Make sure nothing is blocking between the remote control sensor and remote
control unit.
● Make sure you are not too far from the projector when using the remote
control unit. Maximum operate range 16.4 ' (5 m).
● Check the ALL-OFF switch on the Remote Control Unit is set to "ON".
● Check the transmitted signal mode from the remote control unit.
(See "SETTING" section on page 39, 40).
● Check the cable connection between the projector and the computer.
● Check the mouse setting on your computer.
● Turn on the projector before you turn on the computer.
Where to Get Help :
If you still need help after checking the table above, you
should call your dealer's technical support line and
explain your problem.
If your dealer cannot solve your problem, please call
Proxima's customer service. The number is :
USA or Canada
Rest of Word
Phone (800) 447-7692
FAX (858) 457-9647
Phone (858) 457-5500
Europe
Support
Phone +31-43-358-5210
FAX +31-43-358-5202
In the event that your unit is determined to be defective,
you'll be issued a Return Authorization Number.
After you've received this number, send the unit, a copy
of your sales receipt, and a description of the problem,
freight prepaid, to Proxima. Clearly note the Return
Authorization Number on the outside of the shipping
box.
www.proxima.com <http://www.proxima.com>
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and electrical hazards.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
The CE Mark is a Directive conformity mark of the European
Community (EC).
47
APPENDIX
TECHNICAL SPECIFICATIONS
Projector Type
Multi-media Projector
Dimensions (W x H x D)
22.9" (581 mm) x 10" (252 mm) x 30.9" (783 mm)
Net Weight
78.4 Ibs (35.5 kg)
LCD Panel System
1.8" TFT Active Matrix type x 3 panels
Number of Pixels
2,359,296 {786,432 (1,024 x 768) x 3}
Color System
6 color system (PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N)
TV Signal
480i, 480p, 575i, 575p, 720p, 1035i, 1080i-50 and 1080i-60
Scanning Frequency
H-sync. 15 ~ 120 KHz, V-sync. 50 ~ 120 Hz
Motorized Lens Shift
Up, Down, Left and Right
Projection Lamp
150 watt type x 4
Input 1 Jack
DVI-I Terminal (Digital/Analog), RCA Type (Audio R and L) and DIN 8-pin (Control port)
Input 2 Jack
BNC Type x 5 (R/Pr, G/Y, B/Pb, H/HV, and V), RCA Type (Audio R and L) and
DIN 8-pin (Control port)
Input 3 Jack
BNC Type x 2 (VIDEO/Y, C), RCA Type (Audio R and L)
and DIN 4 pin (S-Video)
Input 4 Jack
HDB 15-pin Terminal (Analog), RCA Type (Audio R and L)
and DIN 8-pin (Control port)
Other Jack
Serial port in (DB 9), Serial port out (DB 9), USB port,
Audio Monitor out (RCA Type R and L) and Wired Remote Jack
Built-in Speaker
INT. SP. Stereo (R and L), 3 watt RMS (T.H.D.10%)
Image Elevation Adjustment
Up to 5.7°
Voltage and
Power Consumption
AC 100 ~120 V (10A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200 ~240 V (5A Max. Ampere), 50/60 Hz (Continental Europe)
Operating Temperature
41°F ~ 95°F (5°C ~ 35°C)
Storage Temperature
14°F ~ 140°F (–10°C ~ 60°C)
Remote Control Transmitters
Power Source
Operating Range
Dimensions
Net Weight
Laser Pointer
Accessories
Owner's Manual
AC Power Cord
Wireless/Wired Remote Control Transmitter and Batteries
Remote Control Cable
VGA Cable and DVI Cable
MAC/VGA Adapter and DVI/VGA Adapter
3 Types Control Cable (For PS/2, Serial and ADB port)
6 Types Light-Block Sheet
Lens Mounting Adapter
Protective Dust Cover
:AA, UM3 or R06 Type x 2
:16.4' (5m)/±30°
:2.2" x 1.3" x 7.6" (55mm x 34mm x 192mm)
:0.36 lbs (165 g) (including batteries)
:Class
Laser (Max. Output: 1mW/Wave length : 650±20nm)
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
● The specifications are subject to change without notice.
48
APPENDIX
CONFIGURATIONS OF THE TERMINALS
DVI-I TERMINAL (DIGITAL/ANALOG)
This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect the display output terminal of the
computer to this terminal with the DVI cable (supplied).
Pin Configuration
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
C1
C2
C3
C4
C5
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
HDB 15-PIN TERMINAL (ANALOG)
Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied).
● When connecting the Macintosh computer, use MAC/VGA Adapter (supplied).
● When connecting the Analog signal from DVI terminal of the computer to this terminal, use DVI/VGA Adapter (supplied).
Pin Configuration
4
5
10
15
14
2
3
9
8
13
1
7
12
1
2
3
4
5
6
7
8
6
11
Red Input
Green Input
Blue Input
Sense 2
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
No Connect
Ground (Vert.sync.)
Sense 0
Sense 1
Horiz. sync.
Vert. sync.
Reserved
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (supplied).
Pin Configuration
8
5
7 6
4 3
2 1
1
2
3
4
5
6
7
8
PS/2
----CLK
DATA
GND
--------GND
-----
Serial
RXD
--------GND
RTS
TXD
GND
GND
ADB
----ADB
----GND
------------GND
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
49
APPENDIX
SERIAL PORT IN/OUT TERMINAL
Pin Configuration
Connect the serial port output terminal of the computer to this terminal with the Serial Cable (not supplied).
5 4 3 2 1
9 8 7 6
1
2
3
4
5
6
7
8
9
----RxD
TxD
----Ground
-----------------
USB PORT TERMINAL
Pin Configuration
Connect the USB port output terminal of the computer or peripheral equipment to this terminal with the USB port Cable
(not supplied).
2
1
3
4
1
2
3
4
Vcc
- Data
+ Data
Ground
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
50
APPENDIX
Warranty
Proxima warrants that the Proxima® Model Pro AV 9350 product manufactured by Proxima is free from
defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period
commences on the day of purchase by the end-user. The Warranty Period is two years. The projector
lamp is not covered by this Warranty.
Each Proxima product is manufactured from new parts, or new and some used parts. In some cases, the
product may have been delivered to another end-user and then returned. In all cases, the product has
undergone testing and quality inspection, and Proxima's full warranty terms apply.
The end-user's sales receipt or invoice showing the date of purchase of the product and the name of the
Reseller is proof of the date of purchase. The Warranty extends only to the original purchaser and is not
transferable.
During the Warranty Period, Proxima will, at no additional charge, repair or replace defective parts or at the
option of Proxima, replace the entire unit.
This Limited Warranty does not extend to any Proxima product that has been damaged or been rendered
defective (a) as a result of accident, misuse, or other abuse; (b) by the use of parts not manufactured or
sold by Proxima; or (c) by modification of the product; or (d) as a result servicing by non-authorized
personnel.
Limitation of Warranties
The foregoing warranty is expressly in lieu of any other express or implied warranties, including, without
limitation, warranties of merchantability or fitness for a particular purpose. To the extent not prohibited by
law, all statutory warranties are hereby waived and excluded from this warranty. Proxima expressly
disclaims all warranties not stated in this Limited Warranty.
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
51
For Americas:
Proxima
9440 Carroll Park Drive
San Diego, CA 92121
Ph:
(858) 457-5500
(800) 447-7692 (U. S. and Canada.)
Fax. (858) 457-9647
www.proxima.com <http://www.proxima.com>
For Europe, Asia, Africa, Australasia:
ASK Proxima ASA
K. G. Meldahlsvei 9
Postboks 1403
N-1602 Fredrikstad
tel.
+47-69 34 01 55
fax.
+47-69 34 06 32
Technical Support & Service
Horsterweg 24
6191 RX Beek
The Netherlands
tel.
+31-43 358 5210
fax.
+31-43 358 5202
T
HET
RUS
T
E
DS
OURCEF
ORPROJ
E
CT
ORL
AMPSANDACCE
S
S
ORI
E
S
Part No. 710-XXXXX
10/2000
610 287 0558 (1AA6P1P2361-- ML6F)
Printed in Japan
Disclaimer
This user manual is provided as a free service by FixYourDLP.com. FixYourDLP is in no way responsible
for the content of this manual, nor do we guarantee its accuracy. FixYourDLP does not make any claim
of copyright and all copyrights remain the property of their respective owners.
About FixYourDLP.com
FixYourDLP.com (http://www.fixyourdlp.com) is the World’s #1 resource for media product news,
reviews, do-it-yourself guides, and manuals.
Informational Blog: http://www.fixyourdlp.com
Video Guides: http://www.fixyourdlp.com/guides
User Forums: http://www.fixyourdlp.com/forum
FixYourDLP’s Fight Against Counterfeit Lamps:
http://www.fixyourdlp.com/counterfeits
Sponsors:
RecycleYourLamp.org – Free lamp recycling services for used lamps:
http://www.recycleyourlamp.org
Lamp Research - The trusted 3rd party lamp research company:
http://www.lampresearch.com
Discount-Merchant.com – The worlds largest lamp distributor:
http://www.discount-merchant.com
Sponsored by DM
Download PDF

advertising