Studio Monitor Headphones
HPH-MT7/HPH-MT7W
Overview
Studio monitor headphones that reproduce even the most subtle
nuances of the source sound.
HPH-MT7
HPH-MT7W
Features
•40 mm custom drivers with CCAW voice coils deliver a broad frequency range and accurate response
•Closed-back, circumaural design for excellent isolation
•Smooth synthetic leather and large low-resistance cushions ensure stress-free wearability and high levels of isolation
•Three-dimensional arm pivot construction and adjustable slider length alleviate fatigue when working for extended periods
•Moveable earcups allow single-ear monitoring
•Thick ABS housing and rigid die-cast aluminum support-arms for use in the toughest working environments
•Straight 3 m cable suitable for use in a wide variety of applications *6.3 mm diameter standard stereo plug adaptor included
•Convenient carrying bag included
Technical Data Sheet
1/4
Studio Monitor Headphones
HPH-MT7/HPH-MT7W
Specifications
General Specifications
Type
Closed-back, Circumaural (Over Ear)
Frequency Response
15Hz - 25kHz
Sound Pressure Level 99dB/mW
Impedance (at 1kHz)
49Ω
Maximum Input Power (at 1kHz)
1600mW
Driver Unit
40mm, Dynamic, CCAW Voice Coil
Cable
3.0m (9.8ft), straight cable
Connector
3.5mm (1/8") stereo with 6.3mm (1/4") stereo adaptor
Dimensions (WxHxD) without cable & plug
170mm x 195mm x 98mm (6.7" x 7.7" x 3.9")
Net Weight
360g (0.8lbs) *without cable & plug
Accessories
Threaded 6.3mm (1/4") gold-plated adaptor
Padded carrying bag
Technical Data Sheet
2/4
Studio Monitor Headphones
HPH-MT7/HPH-MT7W
Dimensions
Unit: mm (inch)
98 (3.9)
195 (7.7)
170 (6.7)
Technical Data Sheet
3/4
Studio Monitor Headphones
HPH-MT7/HPH-MT7W
Architectural and Engineering Specifications
The headphones shall be for studio monitoring, closed-back and circumaural over ear headphones. The headphones shall consist of a 40mm
Dynamic CCAW voice coil. The headphones shall be closed-back, circumaural design. Smooth synthetic leather and low-resistance cushions
and three-dimensional arm pivot construction and adjustable slider length shall be provided.
The measured sensitivity shall be 99dB/mW and maximum input power is 1600mW at 1kHz. The frequnecy range shall be 15Hz to 25kHz. The
headphones shall be 49 ohms impedance at 1kHz.
The 3.5mm (1/8") stereo connector with 6.3mm (1/4") stereo adaptor shall be provided. Overall dimenstions shall be 170 x 195 x 98mm without
cable and plugs and weight no more than 360g with cable and plugs.
The headphones shall be equipped with 3.0m Straight cable, Threaded 6.3mm (1/4") gold-plated adaptor and padded carrying bag.
The studio monitor headphones shall be the Yamaha HPH-MT7 and HPH-MT7W.
*All information subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
Created in March, 2017
Technical Data Sheet
4/4
Download PDF