67-4025-001_D, PDS, Analog Input Module_pg1 - crsllc

WIO® ANALOG INPUT MODULE
Datasheet - WM3000-002
PRODUCT HIGHLIGHTS
• Expand Analog Input Capabilities to WIO® Base Unit - Wireless Gateway
• 4 Analog Inputs
• Supports 0-5 V / 0-10 V / 4-20 mA (Independently Selectable)
• 24-bit ADC
• 6-24 VDC Power Input
• Add Multiple Modules to Any Modbus Master Device via RS485 (RJ-45)
• Simple Plug & Play Connection to Modbus Master
• Compact, Low-Profile Design with Low Power Consumption
• Easy-to-Install, Configure and Use
• Scalable Solution
APPLICATIONS
• Oil & Gas, Pipeline, Petro-Chem, Water/Wastewater, Utilities, Irrigation Systems, Mining
SCADA Systems, 3A Sanitary, Pharmaceuticals, Biotechnology, and Much More
WIO® WIRELESS SOLUTIONS
•
•
•
•
•
•
•
Reliable, Robust Wireless Performance
Eliminates Costly Conduits and Wiring
Monitor/Control Process Conditions 24/7
License-Free ISM Band, FSK & FHSS Technologies
Reduces Labor, Installation and Maintenance Costs
Meet Regulatory Requirements
Industrial Strength Performance & Durability
INDUSTRIAL WIRELESS AUTOMATION
Analog Input
Expansion Module
4 Analog
Inputs
0-10 V / 4-20 mA
Selectable Modes
24-bit ADC
6-24 VDC
Power Input
Easy-to-Configure
BreeZ Software
Low Power
Consumption
Works with
Base Unit
Class I; Division 2
WIO® ANALOG INPUT MODULE
Technical Specifications
HARDWARE FEATURES
Device Functionality
∙ Analog Input Expansion Module
User Interface
∙ Standard RS232 Serial
I/O Interface
∙ 4 Analog Inputs
Resolution
∙ 24-bit ADC
Accuracy
∙ 0.1% of Full Scale, 0.2% of Full Scale over Temperature Range
Sensor/Receiver Voltage
∙ (2-Wire) 4-20 mA; (3-Wire) 0-5 or 0-10 V (Jumper Selectable)
Input Impedance
∙ 250 ohm (4-20 mA), 200K (0-5 V), 133K (0-10 V)
RS485/Serial
∙ RS485 (2-Wire), 9,600/19,200 Baud, Modbus/RTU Protocol
Mulit-Dropped Units
ANALOG INPUT MODULE
BASIC NETWORKING DIAGRAM
SCADA
∙ 247 Max
∙ Contains Comprehensive Self-Checking Software and Hardware for
Self-Diagnostics
Continuous Monitoring of Operation
CERTIFICATIONS & SAFETY
Over Voltage Rating
∙ Transient Voltage Suppressor on Each Port
Short Circuit Protection
∙ Fuse Protection (375 mA)
FCC
∙ FCC Part 15
Industry Canada (IC)
∙ ICES-003
Safety
∙ Class I; Division 2
PLC/RTU/EFM
WIO GATEWAYS
Wireless Range of Up to 40 Miles
(Point-to-Point)
MECHANICAL SPECIFICATIONS
Dimensions
∙ 3.8" (W) x 3" (H) x 1.4" (D) / 96.5 mm (W) x 76.2 mm (H) x 36.5 mm (D)
Package Dimensions
∙ 8" (W) x 6" (H) x 2.5" (D) / 203 mm (W) x 152 mm (H) x 63 mm (D)
Weight
∙ Net: 0.75 lbs / 0.3 kg; Packaging: 1 lbs / 0.4 kg
Mounting Hardware
∙ DIN Rail or Direct Mount
WIO BASE UNIT
ELECTRICAL SPECIFICATIONS
DC Power Input
∙ 24 VDC Maximum; 12 VDC Normal; 6 VDC Minimum
Power Consumption
∙ 60 mW @ 12 VDC (Does Not Include Sensors)
Wiring
∙ 18- 24 AWG
ANALOG INPUT MODULES
GENERAL SPECIFICATIONS
Operating Conditions
∙ Temperature: -40°F to 185°F (-40°C to 85°C) /
Class 1; Div 2 (Up to 176°F / 80°C)
FIELD ASSETS
∙ Humidity: 0 to 95%, Non-Condensing
Warranty
4 Analog Inputs
∙ 2-Year Parts and Labor
ORDERING INFORMATION
Model Number(s)
∙ 900 MHz: WM3000-002
Connects to:
∙ WIO® Base Unit, or Other Expansion Modules
3.8”
1.4”
Analog Input Module
Typical installation of OleumTech expansion modules are mounted
adjacent to the Base Unit on DIN rail in a NEMA 4 enclosure and
connected with supplied inter-module connector cable.
Expansion modules compatible for use only with WIO® Base Unit.
WM3000-002
AVCC
AIN3
AGND
AVCC
AIN4
AGND
V+
GN
AVCC
AIN1
AGND
AVCC
AIN2
AAGND
3.0”
Corporation
23 Hubble
Irvine, CA 92618
Phone: 866.508.8586 (Toll-free) / 949.305.9009
Fax: 949.305.9010
WM3000-002
Sales@OleumTech.com
www.OleumTech.com
©2011 OleumTech Corporation. All rights reserved. WIO and BreeZ are registered trademarks of OleumTech Corporation in the United States. Other trademarks are the property of their respective owners.
Specifications, design, and product descriptions subject to change without notice. Document ID: 67-4025-001e