Rev. 070717
Installation Guide
NetWaySP1P
Powered Media Converter/Injector
I.T.E. 43KC
Overview:
Altronix NetWaySP1P converts 10/100/1000 Mbps ethernet to Fiber (1000Base-X/SX/LX)
and provides PoE.
Agency Listings:
Features:
• UL/cUL Listed for Information Technology
Equipment (UL 60950-1).
• CE approved.
Input:
• 24VDC @ 1.5A, 56VDC @ 0.75A (30W)
• 24VDC @ 1.0A, 56VDC @ 0.5A (15W)
Fiber Port:
• One (1) 1Gb SFP port.
• Use with SFP module 1000Base-X (1Gb),
compliant to Class 1 laser product
(not included).
Ethernet:
•
•
•
•
•
IEEE 802.3at (30W) compliant.
Wire type: 4-pair CAT5e and higher.
Connectivity: RJ45, auto-crossover.
Speed: 10/100/1000Mbps.
Distance: up to 100m.
LED Indicators:
• PoE Green LED: Indicates PoE present
(unit is powered on).
• Fiber Signal Green LED:
Indicates SFP connection.
Environmental:
• Refer to Environmental Conditions on page 3.
Dimensions (W x L x H approx.):
3.375” x 3.8” x 1” (85.7mm x 96.52mm x 25.4mm).
Installation Instructions:
Unit is powered via 24VDC-56VDC. NetWaySP1P is not intended to be connected to outside
plant leads and should be installed indoors within the protected premises.
1. Mount NetWaySP1P in desired location utilizing the mounting hole (Fig. 1a, pg. 2).
Use a proper fastener and/or wall anchor when securing NetWaySP1P with screw through
its mounting hole to the wall.
2. Connect 24VDC-56VDC power source to terminals marked [24-56VDC -- Input +].
Terminals accommodate up to 12 AWG wires.
3. Connect structured cable from port marked [PoE+ Output] on NetWaySP1P to a
PoE device (Fig. 2, pg. 2).
4. Connect fiber optic cable to a fiber SFP module. Connect the module to the port marked
[SFP] on the NetWaySP1P. Connect the other end of fiber cable to an SFP module of a
remote device. SFP LED will illuminate indicating data connection (Fig. 2, pg. 2).
NetWaySP1P
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
-1­
Fig. 1
Fig. 1a
Made in U.S.A.
www.altronix.com
Structured
Cable to
PoE Device
NetWaySP1P
-- +
Media Converter/Injector
Input: 24VDC–56VDC
Output: IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
24VDC to
56VDC
Input
I.T.E. 43KC
24-56VDC
-- Input +
Pwr
In
PoE+
Output
PoE
Out
One (1) Gb
SFP port
for Fiber
Fiber
Signal
SFP
Power In
LED
Indicates
unit is
powered
PoE LED
Indicates
PoE
present
SFP LED
Indicates
data connection
Typical Applications:
Fig. 2
NetWaySP1P
Converts Ethernet
to Fiber & Provides PoE
DC
Power
Supply
I.T.E. 43KC
24-56VDC
Input
Fiber
PoE+ (30W) PTZ
115/230VAC
Input
CAT5e/6
Fig. 3
Made in
U.S.A.
NetWaySP1P
Converts Ethernet
to Fiber & Provides PoE
DC
Power
Supply
NetWaySP1A
Media Converter/Repeater
Input: PoE Class 1 or Higher
Data: 10/100/1000
NetWaySP1A
Media
Converter/
Repeater
www.altronix.com
I.T.E. 43KC
PoE
PoE /
10/100/1000 In
SFP
Fiber
Signal
Fiber
115/230VAC 24-56VDC Input
Input
CAT5e/6
PoE+ (30W) PTZ
-2-
CAT5e/6
NetWay8E
or Midspan/Endspan
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
NetWaySP1P
Fig. 4
NetWaySP1P
Converts Ethernet
to Fiber & Provides PoE
I.T.E. 43KC
Composite
CAT5e/6
PoE+ (30W) PTZ
Fiber/Copper
NetWaySP4 Series
Technical Specifications:
Parameter
Description
Ports
One (1) 1Gb SFP port.
One (1) Ethernet port 10/100/1000.
Input power
requirements
24VDC @ 1.5A, 56VDC @ 0.75A (30W / PoE+).
24VDC @ 1.0A, 56VDC @ 0.5A (15W / PoE).
Indicators
PoE Green LED: Indicates PoE present
Pwr In: Indicates unit is powered on
Fiber Signal Green LED: Indicates SFP connection.
Input
Output (Watts) Temperature
15W
-40ºC to 65ºC (-40ºF to 149ºF)
20W
-40ºC to 60ºC (-40ºF to 140ºF)
24VDC
25W
-40ºC to 55ºC (-40ºF to 131ºF)
30W
-40ºC to 45ºC (-40ºF to 113ºF)
Environmental
Conditions
25W
-40ºC to 75ºC (-40ºF to 167ºF)
56VDC
30W
-40ºC to 70ºC (-40ºF to 158ºF)
Storage: -40ºC to 75ºC (-40ºF to 167ºF).
Relative Humidity: 85% +/-5%.
Operating Altitude: -304.8 to 2,000m (-1,000 to 6,561.7 ft.).
Regulatory
Compliance
I.T.E. 43KC
UL/cUL Listed for Information Technology Equipment
(UL 60950-1).
CE approved.
Weights
(approx.)
NetWaySP1P
Product: 0.25 lbs. (0.11 kg) | Shipping: 0.3 lbs. (0.14 kg).
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
-3­
Notes:
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A.
NetWaySP1P
H29Q
-4-
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
MEMBER
NetWaySP1P