24-Port 10/100Mbps+2 Gigabit TP/SFP Combo PoE Switch
IEEE802.3af/at , Mode-A
Product Overview
Modern business networks are used for increasingly
diverse applications – traditional data streams, VoIP
voice traffic, video output from digital security cameras
and remote control devices to name a few. The range of
devices attached to today’s converged network often
need to be supported not just in terms of data –
equipment such as VoIP IP telephones and Wireless
Access Points frequently need to be powered in physical
locations where mains power is not available or difficult
to deliver. Providing power to such devices via an
Ethernet UTP cable is an elegant and easy to implement
High Performance Wire-Speed Switching
The PSE-2624GSR offers 24 10/100Mbps
Fast Ethernet ports and 2 Gigabit TP/SFP
combo ports. The two Gigabit TP/SFP combo
can be either 1000Base-T for 10/100/1000Mbps
or 1000Base-SX/LX through SFP (Small Factor
Pluggable) interface. PSE-2624GSR boasts a
high performance switch architecture that is
capable of providing non-blocking switch
fabric and wire-speed throughput as high as
8.8Gbps. Its two built-in GbE uplink ports also
offer incredible extensibility, flexibility and
connectivity to the Core switch or Servers.
The 24 Port 10/100Mbps PoE+ Switch offers advance
switching controls and provides power to network
devices using Ethernet cables. This scalable and cost
effective solution allows a managed network to
efficiently expand to previously unattainable levels.
The feature rich 24 -port switch offers advanced network
management, Link Aggregation, Trunking and QoS
technology to meet the accelerating demand for secure
manageable networks. LED displays show device status
for easy power management and troubleshooting. PoE
technology conveniently eliminates the need to install
networked devices, such as WSP-2624GS IP cameras
and access points, near a power outlet, thereby reducing
equipment and installation costs.
compatible to IEEE802.3af/at. It can power both existing
10/100Base-T network devices Wi-MAX and wireless
IEEE 802.11n access points.
Up to 30W of Power on
IEEE 802.3af/at
Compatible With All IEEE 802.3af/at or Legacy
Safe: Low Power Devices Receive Only the Power They
Safe and Reliable Power to WLAN Access Points
Automatic Detection and Protection of Non–standard
Supports 10/100 Base-T applications
Compact Design Fits Easily in WLAN Access
Plug-and-Play no configuration required
Internal power supply
Easy installation and maintenance
Save up to 83% power with Green Technology
complies to IEEE 802.3af
Ethernet Terminals
Ordering Information
Part Number
PSE2624GSR: 24-Port 10/100Mbps /PoE +2 Gigabit
TP/SFP Combo Ports Poe Switch (350W)
PoE standard and is backward
Hardware Specification
10/100Mbps Copper Ports
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports
2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 1000Base-SX/LX, shared with Port-25~Port-26
Switch Architecture
Switch Fabric
8.8Gbps / non-blocking
Switch Throughput
6.547Mpps @64Bytes
Address Table
8K entries
Share Data Buffer
Maximum Frame Size
9K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Power, PoE (yellow )
10/100 LINK / ACT (Green)
1000 ACT(Green);1000 LINK(yellow)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory Default
Dimension (W x D x H)
440 x 220 x 44 mm, 1U height
4 kg
Power Requirement
100~240V AC, 50-60 Hz
Power Consumption
/ Dissipation
350 Watts maximum / 1190 BTU/hr maximum
Power over Ethernet
PoE Standard
IEEE 802.3af/at Power over Ethernet / PSE
PoE Power Supply Type
PoE Power Output
Per Port 52V DC, 350mA~600ma . Max. 30 Watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
330 Watts
Max. number of Class 3 PD
Standards Conformance
IEEE802.3u: 100BaseTX
Standards Compliance
Power over Ethernet
0 ~ 50 Degree
C Relative Humidity: 20 ~ 95%
Relative Humidity:
-10 ~ 70 Degree C
20 ~ 95% (non-condensing)
Download PDF