QuickSpecs
HP 2920 Switch Series
Overview
Models
HP 2920-24G Switch
J9726A
HP 2920-24G-POE+ Switch
J9727A
HP 2920-48G Switch
J9728A
HP 2920-48G-POE+ Switch
J9729A
HP 2920-48G-POE+ 740W Switch
J9836A
HP 2920-24G Switch
1.
Power, Fault, and Locator LEDs
7.
PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2.
Console ports
8.
Reset and Clear buttons
3.
LED Mode button and indicator LEDs
9.
Aux port and Out-of-Band Management port
4.
Status LEDs for components on the back of the switch
10. 10/100/1000BASE-T PoE+ RJ-45 ports
5.
Stacking status LEDs
11. Dual-Personality (10/100/1000BASE-T or SFP) ports
6.
Switch port LEDs
HP 2920-24G-PoE+ Switch
1.
Power, Fault, and Locator LEDs
7.
PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2.
Console ports
8.
Reset and Clear buttons
3.
LED Mode button and indicator LEDs
9.
Aux port and Out-of-Band Management port
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 1
QuickSpecs
HP 2920 Switch Series
Overview
4.
Status LEDs for components on the back of the switch
10. 10/100/1000BASE-T PoE+ RJ-45 ports
5.
Stacking status LEDs
11. Dual-Personality (10/100/1000BASE-T or SFP) ports
6.
Switch port LEDs
HP 2920-48G Switch
1.
Power, Fault, and Locator LEDs
7.
PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2.
Console ports
8.
Reset and Clear buttons
3.
LED Mode button and indicator LEDs
9.
Aux port and Out-of-Band Management port
4.
Status LEDs for components on the back of the switch
10. 10/100/1000BASE-T PoE+ RJ-45 ports
5.
Stacking status LEDs
11. Dual-Personality (10/100/1000BASE-T or SFP) ports
6.
Switch port LEDs
HP 2920-48G-PoE+ Switch
HP 2920-48G-PoE+ 740W Switch
1.
Power, Fault, and Locator LEDs
7.
PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2.
Console ports
8.
Reset and Clear buttons
3.
LED Mode button and indicator LEDs
9.
Aux port and Out-of-Band Management port
4.
Status LEDs for components on the back of the switch
10. 10/100/1000BASE-T PoE+ RJ-45 ports
5.
Stacking status LEDs
11. Dual-Personality (10/100/1000BASE-T or SFP) ports
6.
Switch port LEDs
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 2
QuickSpecs
HP 2920 Switch Series
Overview
HP 2920 Switch Series Rear (All)
1.
Grounding lug mounting hole
4.
XPS Connector
2.
10G Expansion Module slots
5.
Power Supply and AC power connector
3.
Stacking Module Slot
Key Features
High-performance Gigabit Ethernet access switch
Four optional 10GbE (SFP+ and/or 10GBASE-T) ports
Stacking capability with a total of four switches
L2 and L3 plus static and RIP routing, PoE, and PoE+ support
Limited Lifetime Warranty 2.0, sFlow, ACLs, OpenFlow, and rate limiting
Product overview
The HP 2920 Switch Series consists of five switches: the 2920-24G and 2920-24G-PoE+ switches with 24 10/100/1000 ports and the
2920-48G, 2920-48G-PoE+, and 2920-48G 740W PoE+ switches with 48 10/100/1000 ports. Each switch has four dual-personality ports
for 10/100/1000 or SFP connectivity.
In addition, the 2920 Switch Series supports up to four optional 10 Gigabit Ethernet (SFP+ and/ or 10GBASE-T) ports, as well as a two-port
stacking module. These options provide you with flexible and easy-to-deploy uplinks and stacking.
Together with static and routing-information-protocol (RIP) routing, robust security and management, enterprise-class features, Limited
Lifetime Warranty 2.0, and software updates included, the 2920 Switch Series is a comprehensive, cost-effective, and scalable solution for
building high-performance networks. These switches can be deployed at the enterprise edge, in remote branch offices, and in converged
networks.
Features and Benefits
Software-defined networking
OpenFlow
supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths
Unified Wired and Wireless
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 3
QuickSpecs
HP 2920 Switch Series
Overview
HTTP redirect function
supports HP Intelligent Management Center (IMC) bring your own device (BYOD) solution
Quality of Service (QoS)
Traffic prioritization (IEEE 802.1p)
allows real-time traffic classification into eight priority levels mapped to eight queues
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port,
and DiffServ
Rate limiting
sets per-port ingress enforced maximums and per-port, per-queue minimums
Large buffers
provide graceful congestion management
Connectivity
Flexible 10 Gb/s Ethernet connectivity
up to four optional 10 Gigabit ports (SFP+ and/or 10GBASE-T)
Optional two-port stacking module with up to 40 Gb/s per port
allows stacking of up to four switch units into a single virtual device
Auto-MDIX
provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
IPv6
IPv6 host
allows the switches to be managed and deployed at the edge of IPv6 networks
Dual stack (IPv4/IPv6)
provides the transition mechanism from IPv4 to IPv6; and supports connectivity for both protocols
MLD snooping
forwards IPv6 multicast traffic to the appropriate interface; and helps prevent IPv6 multicast traffic from flooding the
network
Security
provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown
IEEE 802.3at Power over Ethernet (PoE+)
provide up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and
security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits
that would otherwise be necessary in IP phone and WLAN deployments
Pre-standard PoE support
detects and provides power to pre-standard PoE devices
Dual-personality functionality
includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, and -LH, or 100-FX
Performance
Energy-efficient design
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 4
QuickSpecs
HP 2920 Switch Series
Overview
80 PLUS Silver Certified power supply:High-efficiency power supplies
increases power efficiency and savings
Energy-efficient Ethernet (EEE) support
reduces power consumption in accordance with IEEE 802.3az
HP ProVision ASIC architecture
is designed with the latest ProVision ASIC, providing very low latency, increased packet buffering, and adaptive power consumption
Selectable queue configurations
allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications
Convergence
IP multicast snooping and data-driven IGMP
automatically prevent flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network
devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
is an automated device discovery protocol that provides easy mapping of network management applications
PoE and PoE+ allocations
support multiple methods (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified) to
allocate and manage PoE/PoE+ power for more efficient energy savings
Local MAC Authentication
assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes
Resiliency and high availability
IEEE 802.1s Multiple Spanning Tree
provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE
802.1d and IEEE 802.1w
IEEE 802.3ad link-aggregation-control protocol (LACP) and HP port trunking
support up to 60 static, dynamic, or distributed trunks active across a stack, with each trunk having up to eight links (ports) per
static trunk; support trunking across stack members
Ring and chain stacking topology
allows failure of a link or switch in the ring of stacked switches, while the remaining connected switches continue operation
SmartLink
provides easy-to-configure link redundancy of active and standby links
Management
SNMPv1, v2, and v3
provide complete support of SNMP; provide full support of industry-standard Management Information Base (MIB) plus private
extensions; SNMPv3 supports increased security using encryption
Out-of-band Ethernet management port
enables management of a separate physical management network, keeping management traffic segmented from network data
traffic
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 5
QuickSpecs
HP 2920 Switch Series
Overview
Manageability
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Friendly port names
allow assignment of descriptive names to ports
Find-Fix-Inform
finds and fixes common network problems automatically, then informs administrator
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Software updates
free downloads from the Web
RMON, XRMON, and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Troubleshooting
ingress and egress port monitoring enable network problem solving
Uni-Directional Link Detection (UDLD)
monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the
two devices.
Layer 2 switching
VLAN support and tagging
supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Jumbo packet support
improves the performance of large data transfers; supports frame size of up to 9220 bytes
IEEE 802.1v protocol VLANs
isolate select non-IPv4 protocols automatically into their own VLANs
Rapid Per-VLAN Spanning Tree (RPVST+)
allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
Layer 3 services
DHCP server
centralizes and reduces the cost of IPv4 address management
Layer 3 routing
Static IP routing
provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP)
provides RIPv1 and RIPv2 routing
256 static and 2,048 RIP routes
facilitate segregation of user data without adding external hardware
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 6
QuickSpecs
HP 2920 Switch Series
Overview
Security
Multiple user authentication methods
IEEE 802.1X
uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry
standards
Web-based authentication
provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.1X
supplicant
MAC-based authentication
authenticates the client with the RADIUS server based on the client's MAC address
Authentication flexibility
Multiple IEEE 802.1X users per port
provides authentication of multiple IEEE 802.1X users per port; prevents a user from "piggybacking" on another user's IEEE
802.1X authentication
Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port
switch port will accept up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
Access control lists (ACLs)
provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
Source-port filtering
allows only specified ports to communicate with each other
RADIUS/TACACS+
eases switch management security administration by using a password authentication server
IEEE 802.1X, MAC or Web authentication
provides concurrent network access control and Web authentication of up to 24 clients per port
Secure shell
encrypts all transmitted data for secure remote CLI access over IP networks
Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout
prevents particular configured MAC addresses from connecting to the network
Secure FTP
allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file
Switch management logon security
helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
Custom banner
displays security policy when users log in to the switch
STP BPDU port protection
blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
DHCP protection
blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 7
QuickSpecs
HP 2920 Switch Series
Overview
blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard
protects the root bridge from malicious attacks or configuration mistakes
Identity-driven ACL
enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated
network user
Per-port broadcast throttling
configures broadcast control selectively on heavy traffic port uplinks
Monitor and diagnostics
Digital optical monitoring of SFP+ and 1000BASE-T transceivers
allows detailed monitoring of the transceiver settings and parameters
Warranty and support
Limited Lifetime Warranty v2.0
advance hardware replacement with next-business-day delivery (available in most countries). See
www.hp.com/networking/warrantysummary for duration details.
Electronic and telephone support (for Limited Lifetime Warranty 2.0)
limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is
available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support;
for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 8
QuickSpecs
HP 2920 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable
solution.
HP 2920-24G Switch
J9726A
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JPPDU CABLE NA/MEX/TW/JP
J9726A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9726A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9726A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 2920-24G-POE+ Switch
J9727A
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JPPDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 2
J9727A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9727A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9727A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 2920-48G Switch
J9728A
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 9
QuickSpecs
HP 2920 Switch Series
Configuration
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JPPDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 2
J9728A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9728A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9728A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 2920-48G-POE+ Switch
J9729A
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 2
J9729A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9729A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9729A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP 2920-48G-POE+ 740W Switch
J9836A
44 RJ-45 autosensing 10/100/1000 PoE+ ports
4 RJ-45 dual-personality 10/100/1000 PoE+ ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 1050W 110-240VAC to 54VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 2
J9836A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9836A#B2C
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 10
QuickSpecs
HP 2920 Switch Series
Configuration
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9836A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules
The following Transceivers install into this Module Switch:
Note 1
Note 2
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC SX Transceiver
J4858C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
Localization required on orders without #B2B, #B2C or #B2E options.
Rack Level Integration CTO Models
HP 2920-24G Switch
J9726A#0D1
24 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports\
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 3, 4, 5
J9726A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9726A#B2C
C15 PDU Jumper Cord (ROW)
HP 2920-24G-POE+ Switch
J9727A#0D1
24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
See
Configuration
Note:1, 3, 4, 5
Page 11
QuickSpecs
HP 2920 Switch Series
Configuration
PDU CABLE NA/MEX/TW/JP
J9727A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9727A#B2C
C15 PDU Jumper Cord (ROW)
HP 2920-48G Switch
J9728A#0D1
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X331 165W 100-240VAC to 12VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 3, 4, 5
J9728A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9728A#B2C
C15 PDU Jumper Cord (ROW)
HP 2920-48G-POE+ Switch
J9729A#0D1
48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 575W 100-240VAC to 54VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 3, 4, 5
J9729A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9729A#B2C
C15 PDU Jumper Cord (ROW)
HP 2920-48G-POE+ 740W Switch
J9836A
44 RJ-45 autosensing 10/100/1000 PoE+ ports
4 RJ-45 dual-personality 10/100/1000 PoE+ ports
min=0 \ max=4 SFP Transceivers
1 - HP X332 1050W 110-240VAC to 54VDC PS included
1U - Height
PDU CABLE NA/MEX/TW/JP
See
Configuration
Note:1, 3, 4, 5
J9836A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 12
QuickSpecs
HP 2920 Switch Series
Configuration
PDU CABLE ROW
J9836A#B2C
C15 PDU Jumper Cord (ROW)
Configuration Rules
Note 1
The following Transceivers install into this Module (Use #0D1 quoted to switch if switch is
CTO) - if applicable:
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC SX Transceiver
J4858C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
Note 3
If this switch is factory installed in HP Racks, then the J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions
Note 4
Localization required on orders without #B2B or #B2C options
Note 5
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the CTO Switch Chassis needs to integrate
(with #0D1) to the HP Rack.
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
Internal Power Supplies
System (std 1 // max 1) per switch enclosure
HP X331 165W 100-240VAC to 12VDC PS
J9739A#0D1
includes 1 x c15, 165w (Spare Only)
See
Configuration
Note:1, 3, 4
PDU CABLE NA/MEX/TW/JP
J9739A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9739A#B2C
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 13
QuickSpecs
HP 2920 Switch Series
Configuration
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9739A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 575W 100-240VAC to 54VDC PS
J9738A#0D1
includes 1 x c15, 575w (Spare Only)
See
Configuration
Note:2, 3, 4
PDU CABLE NA/MEX/TW/JP
J9738A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9738A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9738A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 1050W 100-240VAC to 54VDC PS
includes 1 x c15, 1050w (Spare or Upgrade Only)
PDU CABLE NA/MEX/TW/JP
J9737A
See
Configuration
Note:2, 3, 4
J9737A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9737A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9737A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules
Note 1
This power supply is only supported on the J9726A and J9728A.
Note 2
This power supply is only supported on the J9727A ,J9729A and J9836A.
Note 3
Localization required on orders without #B2B ,#B2C or #B2E options.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 14
QuickSpecs
HP 2920 Switch Series
Configuration
Note 4
If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch .
(Offered only in NA, Mexico,, Taiwan, and Japan)
Remarks
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Localization
X332 575W 100-240VAC to 54VDC PS, CL - Chile - English localization
J9738A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
X332 575W 100-240VAC to 54VDC PS, US - U.S. - English localization
J9738A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0973
X332 575 W 100-240VAC to 54VDC PS, EU - Europe - English localization
J9738A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
X332 575W 100-240VAC to 54VDC PS, AU - Australia - English localization
J9738A#ABG
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
X332 575W 100-240VAC to 54VDC PS, BR - Brazil - Portuguese localization
J9738A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
X332 575W 100-240VAC to 54VDC PS, KR - Korea - English localization
J9738A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
X332 575W 100-240VAC to 54VDC PS, UK - United Kingdom - English localization
J9738A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
X332 575W 100-240VAC to 54VDC PS, SZ - Switzerland - English localization
J9738A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
X332 575W 100-240VAC to 54VDC PS, DK - Denmark - English localization
J9738A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
X332 575W 100-240VAC to 54VDC PS, JP - Japan - English localization
J9738A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
X332 575W 100-240VAC to 54VDC PS, IN - India - English localization
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
J9738A#ACJ
Page 15
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
X332 575W 100-240VAC to 54VDC PS, ZA - South Africa - English localization
J9738A#ACQ
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6813
X332 575W 100-240VAC to 54VDC PS, IL - Israel - English localization
J9738A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
X332 575W 100-240VAC to 54VDC PS, TH - Thailand - English localization
J9738A#AKL
X332 575W 100-240VAC to 54VDC PS, CN - China - English localization
J9738A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
X332 575W 100-240VAC to 54VDC PS, TW - Taiwan - English localization
J9738A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
X332 575W 100-240VAC to 54VDC PS, MY - Malaysia - English localization
J9738A#ARE
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
X332 575W 100-240VAC to 54VDC PS, AR - Argentina - English localization
J9738A#ARM
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
X331 165W 100-240VAC to 12VDC PS, CL - Chile - English localization
J9739A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
X331 165W 100-240VAC to 12VDC PS, US - U.S. - English localization
J9739A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0973
X331 165W 100-240VAC to 12VDC PS, EU - Europe - English localization
J9739A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
X331 165W 100-240VAC to 12VDC PS, AU - Australia - English localization
J9739A#ABG
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
X331 165W 100-240VAC to 12VDC PS, BR - Brazil - Portuguese localization
J9739A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
X331 165W 100-240VAC to 12VDC PS, KR - Korea - English localization
J9739A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
X331 165W 100-240VAC to 12VDC PS, UK - United Kingdom - English localization
J9739A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 16
QuickSpecs
HP 2920 Switch Series
Configuration
X331 165W 100-240VAC to 12VDC PS, SZ - Switzerland - English localization
J9739A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
X331 165W 100-240VAC to 12VDC PS, DK - Denmark - English localization
J9739A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
X331 165W 100-240VAC to 12VDC PS, JP - Japan - English localization
J9739A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
X331 165W 100-240VAC to 12VDC PS, IN - India - English localization
J9739A#ACJ
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
X331 165W 100-240VAC to 12VDC PS, ZA - South Africa - English localization
J9739A#ACQ
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6813
X331 165W 100-240VAC to 12VDC PS, IL - Israel - English localization
J9739A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
X331 165W 100-240VAC to 12VDC PS, TH - Thailand - English localization
J9739A#AKL
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0668
X331 165W 100-240VAC to 12VDC PS, CN - China - English localization
J9739A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
X331 165W 100-240VAC to 12VDC PS, TW - Taiwan - English localization
J9739A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
X331 165W 100-240VAC to 12VDC PS, MY - Malaysia - English localization
J9739A#ARE
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
X331 165W 100-240VAC to 12VDC PS, AR - Argentina - English localization
J9739A#ARM
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
2920-24G Switch, CL - Chile - English localization
J9726A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
2920-24G Switch, US - U.S. - English localization
J9726A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0914
2920-24G Switch, EU - Europe - English localization
J9726A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 17
QuickSpecs
HP 2920 Switch Series
Configuration
2920-24G Switch, AU - Australia - English localization
J9726A#ABG
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
2920-24G Switch, BR - Brazil - Portuguese localization
J9726A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
2920-24G Switch, KR - Korea - English localization
J9726A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-24G Switch, UK - United Kingdom - English localization
J9726A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-24G Switch, SZ - Switzerland - English localization
J9726A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
2920-24G Switch, DK - Denmark - English localization
J9726A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
2920-24G Switch, JP - Japan - English localization
J9726A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
2920-24G Switch, IN - India - English localization
J9726A#ACJ
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
2920-24G Switch, ZA - South Africa - English localization
J9726A#ACQ
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6813
2920-24G Switch, IL - Israel - English localization
J9726A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
2920-24G Switch, TH - Thailand - English localization
J9726A#AKL
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0668
2920-24G Switch, CN - China - English localization
J9726A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
2920-24G Switch, TW - Taiwan - English localization
J9726A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
2920-24G Switch, MY - Malaysia - English localization
J9726A#ARE
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 18
QuickSpecs
HP 2920 Switch Series
Configuration
2920-24G Switch, AR - Argentina - English localization
J9726A#ARM
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
2920-24G Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
J9726A#B2B
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1091
2920-24G Switch, JmpCbl-ROW - JmpCbl-ROW
J9726A#B2C
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1094
2920-24G Switch, 220V-NA - L6-20 220V-NA
J9726A#B2E
Power Cord: Quantity :1, NEMA 6-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-3996
2920-24G-POE+ Switch, CL - Chile - English localization
J9727A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
2920-24G-POE+ Switch, US - U.S. - English localization
J9727A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0914
2920-24G-POE+ Switch, EU - Europe - English localization
J9727A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-24G-POE+ Switch, AU - Australia - English localization
J9727A#ABG
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
2920-24G-POE+ Switch, BR - Brazil - Portuguese localization
J9727A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
2920-24G-POE+ Switch, KR - Korea - English localization
J9727A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-24G-POE+ Switch, UK - United Kingdom - English localization
J9727A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-24G-POE+ Switch, SZ - Switzerland - English localization
J9727A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
2920-24G-POE+ Switch, DK - Denmark - English localization
J9727A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
2920-24G-POE+ Switch, JP - Japan - English localization
J9727A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 19
QuickSpecs
HP 2920 Switch Series
Configuration
2920-24G-POE+ Switch, IN - India - English localization
J9727A#ACJ
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part J9727A#ACQ
Store #: 8120-6813
2920-24G-POE+ Switch, IL - Israel - English localization
J9727A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
2920-24G-POE+ Switch, TH - Thailand - English localization
J9727A#AKL
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0668
2920-24G-POE+ Switch, CN - China - English localization
J9727A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
2920-24G-POE+ Switch, TW - Taiwan - English localization
J9727A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
2920-24G-POE+ Switch, MY - Malaysia - English localization
J9727A#ARE
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-24G-POE+ Switch, AR - Argentina - English localization
J9727A#ARM
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
2920-24G-POE+ Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
J9727A#B2B
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1091
2920-24G-POE+ Switch, JmpCbl-ROW - JmpCbl-ROW
J9727A#B2C
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1094
2920-24G-POE+ Switch, 220V-NA - L6-20 220V-NA
J9727A#B2E
Power Cord: Quantity :1, NEMA 6-15P, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8120-5338
2920-48G Switch, CL - Chile - English localization
J9728A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
2920-48G Switch, US - U.S. - English localization
J9728A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0914
2920-48G Switch, EU - Europe - English localization
J9728A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-48G Switch, AU - Australia - English localization
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
J9728A#ABG
Page 20
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
2920-48G Switch, BR - Brazil - Portuguese localization
J9728A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
2920-48G Switch, KR - Korea - English localization
J9728A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-48G Switch, UK - United Kingdom - English localization
J9728A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-48G Switch, SZ - Switzerland - English localization
J9728A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
2920-48G Switch, DK - Denmark - English localization
J9728A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
2920-48G Switch, JP - Japan - English localization
J9728A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
2920-48G Switch, IN - India - English localization
J9728A#ACJ
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
2920-48G Switch, ZA - South Africa - English localization
J9728A#ACQ
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6813
2920-48G Switch, IL - Israel - English localization
J9728A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
2920-48G Switch, TH - Thailand - English localization
J9728A#AKL
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0668
2920-48G Switch, CN - China - English localization
J9728A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
2920-48G Switch, TW - Taiwan - English localization
J9728A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
2920-48G Switch, MY - Malaysia - English localization
J9728A#ARE
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-48G Switch, AR - Argentina - English localization
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
J9728A#ARM
Page 21
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
2920-48G Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
J9728A#B2B
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1091
2920-48G Switch, JmpCbl-ROW - JmpCbl-ROW
J9728A#B2C
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1094
2920-48G Switch, 220V-NA - L6-20 220V-NA
J9728A#B2E
Power Cord: Quantity :1, NEMA 6-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-3996
2920-48G-POE+ Switch, CL - Chile - English localization
J9729A#A1X
Power Cord: Quantity :1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6980
2920-48G-POE+ Switch, US - U.S. - English localization
J9729A#ABA
Power Cord: Quantity :1, NEMA 5-15P, C15 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-0914
2920-48G-POE+ Switch, EU - Europe - English localization
J9729A#ABB
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-48G-POE+ Switch, AU - Australia - English localization
J9729A#ABG
Power Cord: Quantity :1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0834
2920-48G-POE+ Switch, BR - Brazil - Portuguese localization
J9729A#AC4
Power Cord: Quantity :1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1069
2920-48G-POE+ Switch, KR - Korea - English localization
J9729A#AC6
Power Cord: Quantity :1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6811
2920-48G-POE+ Switch, UK - United Kingdom - English localization
J9729A#ACC
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
2920-48G-POE+ Switch, SZ - Switzerland - English localization
J9729A#ACD
Power Cord: Quantity :1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39
feet ,Part Store #: 8120-6815
2920-48G-POE+ Switch, DK - Denmark - English localization
J9729A#ACE
Power Cord: Quantity :1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6814
2920-48G-POE+ Switch, JP - Japan - English localization
J9729A#ACF
Power Cord: Quantity :1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-4753
2920-48G-POE+ Switch, IN - India - English localization
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
J9729A#ACJ
Page 22
QuickSpecs
HP 2920 Switch Series
Configuration
Power Cord: Quantity :1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part Store
#: 8121-0780
2920-48G-POE+ Switch, ZA - South Africa - English localization
J9729A#ACQ
Power Cord: Quantity :1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 2.25 meters, 7.39 feet ,Part
Store #: 8120-6813
2920-48G-POE+ Switch, IL - Israel - English localization
J9729A#AKJ
Power Cord: Quantity :1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8121-1035
2920-48G-POE+ Switch, TH - Thailand - English localization
J9729A#AKL
Power Cord: Quantity :1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8121-0668
2920-48G-POE+ Switch, CN - China - English localization
J9729A#AKM
Power Cord: Quantity :1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-8707
2920-48G-POE+ Switch, TW - Taiwan - English localization
J9729A#ARB
Power Cord: Quantity :1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-0974
Power Cord: Quantity :1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6809
J9729A#ARE
2920-48G-POE+ Switch, AR - Argentina - English localization
J9729A#ARM
Power Cord: Quantity :1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 2.3 meters, 7.55 feet ,Part
Store #: 8120-6869
2920-48G-POE+ Switch, JmpCbl-NA/JP/TW - JmpCbl-NA/JP/TW
J9729A#B2B
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1091
2920-48G-POE+ Switch, JmpCbl-ROW - JmpCbl-ROW
J9729A#B2C
Power Cord: Quantity :1, C14 STRAIGHT, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet
,Part Store #: 8121-1094
2920-48G-POE+ Switch, 220V-NA - L6-20 220V-NA
J9729A#B2E
Power Cord: Quantity :1, NEMA 6-15P, C15 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet ,Part
Store #: 8120-5338
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built
Networking
Ethernet Modules
System (std 0 // max 2) User Selection (min 0 // max 2) per enclosure
HP 2920 2-port 10GbE SFP+ Module
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
J9731A
Page 23
QuickSpecs
HP 2920 Switch Series
Configuration
min=0 \ max=2 SFP + Transceivers
HP 2920 2-port 10GBASE-T Module
See
Configuration
Note:1
J9732A
Configuration Rules
Note 1
The following Transceivers install into this Module (Use #0D1 or #B01 quoted to switch if
switch is CTO) - if applicable:
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC SX Transceiver
J4858C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X132 10G SFP+ LC ER Transceiver
J9153A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X132 10G SFP+ LC LRM Transceiver
J9152A
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable
J9300A
HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable
J9301A
HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable
J9302A
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
J9287B
Stacking Modules
System (std 0 // max 1) User Selection (min 0 // max 1) per enclosure
HP 2920 2-port Stacking Module
J9733A
Transceivers
SFP Transceivers
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X121 1G SFP LC SX Transceiver
J4858C
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 24
QuickSpecs
HP 2920 Switch Series
Configuration
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
SFP+ Transceivers
HP X132 10G SFP+ LC ER Transceiver
J9153A
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X132 10G SFP+ LC LRM Transceiver
J9152A
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B#B01
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B#B01
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B#B01
HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable
J9300A#B01
HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable
J9301A#B01
HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable
J9302A#B01
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
J9287B
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable
AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable
AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable
AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable
AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable
AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable
AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl
QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl
QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl
QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl
QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl
QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl
QK737A
Stacking Cables
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 25
QuickSpecs
HP 2920 Switch Series
Configuration
HP 2920 0.5m Stacking Cable
J9734A
HP 2920 1.0m Stacking Cable
J9735A
HP 2920 3.0m Stacking Cable
J9736A
Switch Enclosure Options
Mounting Kit
HP X410 1U Univ 4-post Rack Mnt Kit
J9583A
See Configuration
Note:1
Configuration Rules
Note 1
If this Mounting Kit is order with #0D1 then it integrates to the HP Universal Rack. (not the switch)
External/Redundant Power Supplies
HP 640 External/Redundant Power Supply
Height = 1U
includes 1 x c13, 800w
J9805A
See Configuration
Note:1, 3, 4, 5
HP X331 165W 100-240VAC to 12VDC PS
includes 1 x c15, 165w
J9739A
See Configuration
Note:2
PDU CABLE NA/MEX/TW/JP
J9739A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9739A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9739A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 575W 100-240VAC to 54VDC PS
includes 1 x c15, 575w
J9738A
See Configuration
Note:2
PDU CABLE NA/MEX/TW/JP
J9738A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 26
QuickSpecs
HP 2920 Switch Series
Configuration
PDU CABLE ROW
J9738A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9738A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
HP X332 1050W 100-240VAC to 54VDC PS
includes 1 x c15, 1050w
J9737A
See Configuration
Note:2
PDU CABLE NA/MEX/TW/JP
J9737A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW
J9737A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Switch to Wall Power Cord
J9737A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules
Note 1
Can take up to Three internal power supplies. (J9737A, J9738A and J9739A) System (std 0 // max 3)
User Selection (min 1 // max 3) per Power Supply enclosure. Mixing or matching of the 3 different
power supplies is supported in the Chassis.
Note 2
Localization required on orders without #B2B, #B2C or #B2E options.
Note 3
No Localization. Localization is on the internal Power supplies.
Note 4
Up to eight (8) Switch Chassis can be connected to this External Redundant Power Source.
Power supply slot 1 supports up to 4 cables
Power supply slot 2 supports up to 2 cables
Power supply slot 3 supports up to 2 cables
Supported on J9726A, J9727A, J9728A, J9729A and J9836A switches only.
Note 5
If this RPS/EPS is installed in HP Universal Racks, Then the J9583A#0D1 is required
Remarks:
For J9726A, and J9728A, the power supply in J9805A must be J9739A (165W).
For J9727A and J9729A, the power supply in J9805A must be J9737A (1050W) or J9738A (575W).
For J9836A, the power supply in J9805A must be J9737A (1050W).
Drop down under power supply should offer the following options and results:
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 27
QuickSpecs
HP 2920 Switch Series
Configuration
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)
External/Redundant Power Cables
HP 640 EPS/RPS 1m Cable
J9806A
See Configuration
Note:1
Configuration Rules
Note 1
1, 2, 3 or 4 cables per AC Power Supply used with J9805A supported. System (std 0 // max 8) User
Selection (min 1 // max 8) per Power Supply enclosure.
Power supply slot 1 supports up to 4 cables
Power supply slot 2 supports up to 2 cables
Power supply slot 3 supports up to 2 cables
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 28
QuickSpecs
HP 2920 Switch Series
Technical Specifications
HP 2920-24G Switch (J9726A)
I/O ports and slots
20 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
2 module slots
1 stacking module slot
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9739A (HP X331 165W 100-240VAC to 12VDC Modular Power Supply)
Physical characteristics
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
Weight
11.57 lb (5.25 kg)
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash MB; packet buffer size: 11.25 MB (6.75 MB
dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.3 µs (FIFO 64-byte packets)
Throughput
95.2 million pps
Switching capacity
128 Gb/s
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95%, noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Environment
Non-operating/
15% to 95%, noncondensing
Storage relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 57 dB, Pressure: 41.4 dB
Electrical characteristics Frequency
50/60 Hz
Maximum heat
dissipation
198 BTU/hr (208.89 kJ/hr)
AC voltage
100-240 VAC
Maximum power rating
58 W
Idle power
26 W
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 29
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS
Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second
Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Management
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration
menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB)
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 2920-24G-PoE+ Switch (J9727A)
I/O ports and slots
20 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE
802.3at PoE+)
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
2 module slots
1 stacking module slot
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9738A (HP X332 575W 100-240VAC to 54VDC Modular Power Supply)
Physical characteristics
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
Weight
12.04 lb (5.46 kg)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 30
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.5 MB dynamic
egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.3 µs (FIFO 64-byte packets)
Throughput
95.2 million pps
Switching capacity
128 Gb/s
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95%, noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Environment
Non-operating/
15% to 95%, noncondensing
Storage relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 61 dB, Pressure: 44.9 dB
Electrical characteristics Frequency
50/60 Hz
Maximum heat
dissipation
358 BTU/hr (377.69 kJ/hr)
AC voltage
100-240 VAC
Maximum power rating
475 W
Idle power
42 W
PoE power
370 W
Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS
Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second
Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 31
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Management
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration
menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB)
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 2920-48G Switch (J9728A)
I/O ports and slots
44 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
2 module slots
1 stacking module slot
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9739A (HP X331 165W 100-240VAC to 12VDC Modular Power Supply)
Physical characteristics
Dimensions
17.42(w) x 13.23(d) x 1.75(h) in (44.25 x 33.6 x 4.45 cm) (1U height)
Weight
11.95 lb (5.42 kg)
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.75 MB dynamic
egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.3 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.2 µs (FIFO 64-byte packets)
Throughput
130.9 million pps
Switching capacity
176 Gb/s
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95%, noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Environment
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 32
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Non-operating/
15% to 95%, noncondensing
Storage relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 57 dB, Pressure: 41.8 dB
Electrical characteristics Frequency
50/60 Hz
Maximum heat
dissipation
239 BTU/hr (252.15 kJ/hr)
AC voltage
100-240 VAC
Maximum power rating
70 W
Idle power
27 W
Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS
Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60825-1; IEC
60950-1, Second Edition; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Management
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration
menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB)
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 2920-48G-PoE+ Switch (J9729A)
I/O ports and slots
44 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE
802.3at PoE+)
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 33
QuickSpecs
HP 2920 Switch Series
Technical Specifications
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
2 module slots
1 stacking module slot
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9738A (HP X332 575W 100-240VAC to 54VDC Modular Power Supply)
Physical characteristics
Dimensions
17.42(w) x 13.23(d) x 1.73(h) in (44.25 x 33.6 x 4.39 cm) (1U height)
Weight
12.57 lb (5.7 kg)
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB (6.75 MB dynamic
egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.2 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.2 µs (FIFO 64-byte packets)
Throughput
130.9 million pps
Switching capacity
176 Gb/s
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95%, noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Environment
Non-operating/
15% to 95%, noncondensing
Storage relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 62 dB, Pressure: 45.2 dB
Electrical characteristics Frequency
50/60 Hz
Maximum heat
dissipation
399 BTU/hr (420.95 kJ/hr)
AC voltage
100-240 VAC
Maximum power rating
487 W
Idle power
46 W
PoE power
370 W
Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS
Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60825-1; IEC
60950-1, Second Edition; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 34
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Management
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration
menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB)
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP 2920-48G-PoE+ 740W Switch (J9836A)
I/O ports and slots
44 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE
802.3at PoE+)
4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
1 dual-personality (RJ-45 or USB micro-B)
1 USB 1.1
1 RJ-45 out-of-band management port
2 module slots
1 stacking module slot
Power supplies
1 power supply slot
1 minimum power supply required
includes: 1 x J9737A (HP X332 1050W 110-240VAC to 54VDC Power Supply)
Physical characteristics
Dimensions
17.42(w) x 13.23(d) x 1.73(h) in (44.25 x 33.6 x 4.39 cm) (1U height)
Weight
12.86 lb (5.83 kg)
Memory and processor
Tri Core ARM1176 @ 625 MHz, 512 MB SDRAM, 1 GB flash; packet buffer size: 11.25 MB
(6.75 MB dynamic egress + 4.5 MB ingress)
Performance
100 Mb Latency
< 9.0 µs (FIFO 64-byte packets)
1000 Mb Latency
< 3.2 µs (FIFO 64-byte packets)
10 Gbps Latency
< 3.2 µs (FIFO 64-byte packets)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 35
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Environment
Throughput
130.9 million pps
Switching capacity
176 Gb/s
Routing table size
2048 entries (IPv4), 256 entries (IPv6)
MAC address table size
16000 entries
Operating temperature
32°F to 131°F (0°C to 55°C)
Operating relative
humidity
15% to 95%, noncondensing
Non-operating/
Storage temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating/
15% to 95%, noncondensing
Storage relative humidity
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: -53 dB, Pressure: -38.3 dB
Electrical characteristics Frequency
50/60 Hz
Maximum heat
dissipation
399 BTU/hr (420.95 kJ/hr)
AC voltage
100-240 VAC
Maximum power rating
487 W
Idle power
46 W
PoE power
740 W
Safety
CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS
Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1 :Second
Edition ; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-1-07 2nd Edition; EN 609501:2006+A11:2009+A1:2010+A12:2011; IEC 60950-1 (ed.2): am1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 36
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Management
HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration
menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and outof-band; out-of-band management (serial RS-232C or Micro USB)
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
Standards and protocols Denial of service protection
(applies to all products in CPU DoS Protection
series)
Device management
RFC 1155 Structure and Mgmt Information (SMIv1)
RFC 1157 SNMPv1/v2c
RFC 1591 DNS (client)
RFC 1901 (Community based SNMPv2)
RFC 1901-1907 SNMPv2c, SMIv2 and Revised MIB-II
RFC 1908 (SNMP v1/2 Coexistence)
RFC 2578-2580 SMIv2
RFC 2579 (SMIv2 Text Conventions)
RFC 2580 (SMIv2 Conformance)
RFC 2819 (RMON groups Alarm, Event, History and
Statistics only)
RFC 3416 (SNMP Protocol Operations v2)
RFC 3417 (SNMP Transport Mappings)
HTML and telnet management
HTTP, SSHv1, and Telnet
Multiple Configuration Files
Multiple Software Images
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
Web UI
General protocols
IEEE 802.1AX-2008 Link Aggregation
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 37
QuickSpecs
HP 2920 Switch Series
Technical Specifications
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 868 Time Protocol
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1918 Address Allocation for Private Internet
RFC 2030 Simple Network Time Protocol (SNTP) v4
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2453 RIPv2
RFC 2865 Remote Authentication Dial In User Service (RADIUS)
RFC 2866 RADIUS Accounting
RFC 3046 DHCP Relay Agent Information Option
RFC 3411 An Architecture for Describing Simple Network Management Protocol (SNMP) Management
Frameworks
RFC 3412 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP)
RFC 3413 Simple Network Management Protocol (SNMP) Applications
RFC 3414 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol
(SNMPv3)
RFC 3415 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)
RFC 3416 Protocol Operations for SNMP
RFC 3417 Transport Mappings for the Simple Network Management Protocol (SNMP)
RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
RFC 3576 Ext to RADIUS (CoA only)
RFC 4541 Considerations for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery
(MLD) Snooping Switches
RFC 4675 RADIUS VLAN & Priority
RFC 4861 Neighbor Discovery for IP version 6 (IPv6)
RFC 4862 IPv6 Stateless Address Autoconfiguration
UDLD (Uni-directional Link Detection)
IP multicast
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 38
QuickSpecs
HP 2920 Switch Series
Technical Specifications
RFC 3376 IGMPv3 (host joins only)
RFC 4541 Considerations for Internet Group
Management Protocol (IGMP) and Multicast Listener
Discovery (MLD) Snooping Switches
IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2464 Transmission of IPv6 over Ethernet Networks
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 for IPv6
RFC 4022 MIB for TCP
RFC 4113 MIB for UDP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4291 IP Version 6 Addressing Architecture
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 5095 Deprecation of Type 0 Routing Headers in IPv6
MIBs
IEEE 802.1ap (MSTP and STP MIB's only)
RFC 1155 Structure & ID of Mgmt Info for TCP/IP Internets
RFC 1156 (TCP/IP MIB)
RFC 1157 A Simple Network Management Protocol (SNMP)
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
RFC 2613 SMON MIB
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 39
QuickSpecs
HP 2920 Switch Series
Technical Specifications
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 2932 IP (Multicast Routing MIB)
RFC 2933 IGMP MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3417 Simple Network Management Protocol (SNMP) over IEEE 802 Networks
RFC 3418 MIB for SNMPv3
RFC 4836 Managed Objects for 802.3 Medium Attachment Units (MAU)
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 1155 Structure of Management Information
RFC 1157 SNMPv1
RFC 2021 Remote Network Monitoring Management Information Base Version 2 using SMIv2
RFC 2576 Coexistence between SNMP versions
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
RFC 2819 Remote Network Monitoring Management Information Base
RFC 2856 Textual Conventions for Additional High Capacity Data Types
RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations
RFC 3164 BSD syslog Protocol
RFC 3176 sFlow
RFC 3411 SNMP Management Frameworks
RFC 3412 SNMPv3 Message Processing
RFC 3414 SNMPv3 User-based Security Model (USM)
RFC 3415 SNMPv3 View-based Access Control Model VACM)
RFC 5424 Syslog Protocol
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3
XRMON
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DiffServ Precedence, including 8 queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 40
QuickSpecs
HP 2920 Switch Series
Technical Specifications
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
IEEE 802.1X:Port-Based Network Access Control (2001)
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1492 An Access Control Protocol, Sometimes Called TACACS
RFC 1492 TACACS+
RFC 1994 PPP Challenge Handshake Authentication
Protocol (CHAP)
RFC 2082 RIP-2 MD5 Authentication
RFC 2104 Keyed-Hashing for Message Authentication
RFC 2138 RADIUS Authentication
RFC 2139 RADIUS Accounting
RFC 2246 Transport Layer Security (TLS)
RFC 2548 Microsoft Vendor-specific RADIUS Attributes
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2716 PPP EAP TLS Authentication Protocol
RFC 2818 HTTP Over TLS
RFC 2865 RADIUS (client only)
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 2867 RADIUS Accounting Modifications for Tunnel Protocol Support
RFC 2868 RADIUS Attributes for Tunnel Protocol Support
RFC 2869 RADIUS Extensions
RFC 2882 NAS Requirements: Extended RADIUS Practices
RFC 3162 RADIUS and IPv6
RFC 3576 Dynamic Authorization Extensions to RADIUS
RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
RFC 3580 IEEE 802.1X Remote Authentication Dial In
User Service (RADIUS) Usage Guidelines
RFC 4576 RADIUS Attributes
Access Control Lists (ACLs)
draft-grant-tacacs-02 (TACACS)
Guest VLAN for 802.1x
MAC Authentication
MAC Lockdown
MAC Lockout
Port Security
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
Web Authentication
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 41
QuickSpecs
HP 2920 Switch Series
Accessories
HP 2920 Switch series
accessories
Modules
HP 2920 2-port 10GbE SFP+ Module
J9731A
HP 2920 2-port 10GBASE-T Module
J9732A
HP 2920 2-port Stacking Module
J9733A
HP 2920 2-port 10GbE SFP+ Module/S-Buy
J9731AS
HP 2920 2-port 10GBASE-T Module/S-Buy
J9732AS
HP 2920 2-port Stacking Module/S-Buy
Transceivers
J9733AS
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X111 100M SFP LC FX Transceiver
J9054C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
HP X132 10G SFP+ LC SR Transceiver
J9150A
HP X132 10G SFP+ LC LR Transceiver
J9151A
HP X132 10G SFP+ LC LRM Transceiver
J9152A
HP X132 10G SFP+ LC ER Transceiver
J9153A
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable
J9300A
HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable
J9301A
HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable
J9302A
HP X132 10G SFP+ LC SR XCVR/S-Buy
J9150AS
HP X132 10G SFP+ LC LR XCVR/S-Buy
J9151AS
HP X132 10G SFP+ LC LRM XCVR/S-Buy
Cables
J9152AS
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 42
QuickSpecs
HP 2920 Switch Series
Accessories
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP 2920 0.5m Stacking Cable
J9734A
HP 2920 1.0m Stacking Cable
J9735A
HP 2920 3.0m Stacking Cable
J9736A
HP 640 External/Redundant Power Supply 1m Cable
J9806A
HP 2920 0.5m Stacking Cable/S-Buy
J9734AS
HP 2920 1.0m Stacking Cable/S-Buy
J9735AS
HP 2920 3.0m Stacking Cable/S-Buy
Power Supply
J9736AS
HP 640 Redundant/External Power Supply Shelf
Mounting Kit
J9805A
HP X410 1U Universal 4-post Rack Mounting Kit
HP 2920-48G-PoE+ 740W Switch_PL (J9836A_PL)
J9583A
HP X332 575W 100-240VAC to 54VDC modular power supply
J9738A
HP X332 1050W 110-240VAC to 54VDC Power Supply
J9737A
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 43
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 0.5 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
(AJ833A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm
for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber and designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 44
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 1 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m
(AJ834A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 45
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 2 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
(AJ835A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 46
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 5 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
(AJ836A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and
Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 47
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 15 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
(AJ837A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 48
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 30 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
(AJ838A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 49
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP 50 m Multimode OM3
LC/LC Optical Cable
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of
up to 300 m;
(AJ839A)
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Notes
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um
Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm.
VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for
Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um multimode
optical fiber. The cable is designed to work in both the 850 and 1300 nm
wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 50
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 51
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable (QK735A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 52
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um
duplex cable and Ethernet assembly with LC duplex connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type
OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white
stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added
for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @
23°C as tested in accordance with EIA 455-45
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 53
QuickSpecs
HP 2920 Switch Series
Accessory Product Details
HP X410 1U Universal 4post Rack Mounting Kit
Notes
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520 Series,
E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power
Supply
This universal rack mounting kit is design to fit the following racks: HP 10K
10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC
Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other
brands and models too.
Services
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
(J9583A)
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 54
QuickSpecs
HP 2920 Switch Series
Summary of Changes
Date
Version History
Action
Description of Change:
01-Dec-2014
From Version 13 to 14Changed
Warranty and support updated, Accessories were added back to the
document
Key Features, Product Overview and Features and Benefits were also
updated.
09-Oct-2014
From Version 12 to 13Removed
Removed SKUs J9438A, J9440A and J9439A from Accessory Product
Details
15-Apr-2014
From Version 10 to 12Removed
HP X121 1G SFP RJ45 T Transceiver was removed from
Configuration.
17-Feb-2014
From Version 9 to 10 Changed
SFP+ Transceivers were revised.
12-Nov-2013
From Version 8 to 9 Changed
Build to Order, Rack Level Integration CTO Models, Internal Power
Supplies, Cables, and Switch Enclosure Options were revised.
To learn more, visit: www.hp.com/networking
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
DA - 14499 Worldwide QuickSpecs — Version 14 — 12/1/2014
Page 55
Download PDF