Industrial Ethernet Switch Rack-Mount Managed Gigabit Ethernet Switch
v1.11 / Dec, 2013
Industrial Layer-3 IEC 61850-3 modular rack mount managed
Gigabit Ethernet switch with 4 slots
Industrial
Device Server
Industrial Wireless
Access Point
Full Gigabit
Industrial Cellular
VPN Router
O-Ring
Industrial
M2M Gateway
Accessories
▪ Designed for power substation / Railway application and fully compliant with
the requirement of IEC 61850-3 and IEEE 1613
▪ Modular designed makes network planning easy
▪ Supports Layer 3 routing, RIP and static routing function
▪ Supports GRE (Generic Routing Encapsulation) tunneling protocol
▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and
MSTP (RSTP/STP compatible) for Ethernet Redundancy
▪ Open-Ring support the other vendor’s ring technology in open architecture
▪ O-Chain allow multiple redundant network rings
▪ Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
▪ Support IEEE 1588v2 clock Synchronization
▪ Supports IPV6 new internet protocol version
▪ Support Modbus TCP protocol
▪ VLAN unaware : Supports priority-tagged frames to be received by specific
IEDs
▪ Provided HTTPS/SSH protocol to enhance network security
▪ Support IEEE 802.3az Energy-Efficient Ethernet technology
▪ Supports SMTP client
▪ Supports IP-based bandwidth management
▪ Supports application-based QoS management
▪ Supports Device Binding security function
▪ Supports DOS/DDOS auto prevention
▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
▪ Support ACL, TACACS+ and 802.1x User Authentication for security
▪ Supports 9.6K Bytes Jumbo Frame
▪ Multiple notification for warning of unexpected event
▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)
configuration
▪ Support LLDP Protocol
▪ Supports redundant power inputs with optional voltage range
▪ 19 inches rack mountable design
Industrial
Media Converter
Features
Industrial
Ethernet Switch
RGS-PR9000 Series
Introduction
D esign ed for R u gged E xcellence
Network
Management Software
RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling
stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. With completely support of Ethernet Redundancy protocol, O-Ring
(recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions
or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 85°C (If use 10G SFP module then
operating temperature is -20 ~ 60°C). RGS-PR9000 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface,
Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling
stock application.
1-37
▪ O-Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring
redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology.
▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing’s switches compatible with other vendor’s proprietary redundant
ring technologies. It enables ORing’s switches to form a single ring with other vendor’s switch. In cases where the ring is setup using
proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements.
▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone
Industrial Ethernet Switch
1
network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust
compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness
in one set of network redundancy topology.
▪ MRP : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome
any single failure with recovery time much faster than achievable with Spanning Tree Protocol.
▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth
for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth.
▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according
to TCP/UDP port number.
▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network.
Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR
and controllers.
▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in
short time, the switch will lock the source IP address for certain time to prevent the attack. It’s hardware based prevention so it can prevent DOS/DDOS
attack immediately and completely.
▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control
applications.
▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.
▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking
standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or
more.
▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control
applications.
▪ Modular Designed : Modular designed can makes network planning easy and allow greater flexibility by letting you install other Ethernet/Optical
fiber modular.
1-38
w w w.oring - net wo rk in g.co m
Industrial
Ethernet Switch
PLC
IGS-7084GCP
Control Center
O-Ring
PLC IGS-7084GCP
SCADA
PLC
IGS-7084GCP
IP Camera
Industrial
Media Converter
Control Center
IGS-7084GCP
PLC
SCADA
SCADA
IGPS-1041GTPA
Control Center
IDS-5042
Power Generation
IMG-111 IDS-5011-WG
Smart Metering
Industrial
Device Server
RGS-PR9000
Transmission
Industrial Wireless
Access Point
Distribution
Open-Vision
Industrial Cellular
VPN Router
ORing’s switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for
user to manage and monitor all of industrial Ethernet switches on the industrial network.
Industrial
M2M Gateway
Commander
Host Monitor
Accessories
Network
Management Software
Topology View
D esign ed for R u gged E xcellence
1-39
Dimensions
Industrial Ethernet Switch
1
(Unit=mm)
Specifications
ORing Switch Model
RGS-PR9000-HV
Physical Ports
Slot Number
4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
8K
Priority Queues
8
Processing
Store-and-Forward
Switching latency: 7 us
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Up to 9.6K Bytes
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
Single 802.1x and Multiple 802.1x
MAC-based authentication
QoS assignment
Guest VLAN
MAC address limit
TACACS+
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
Authorization (15 levels)
IP source guard
Switch Properties
Jumbo frame
Security Features
1-40
RGS-PR9000-LV
w w w.oring - net wo rk in g.co m
RS-232 Serial Console Port
RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
Industrial
Device Server
O-Ring Open-Ring
O-Chain
MRP
MSTP(RSTP/STP compatible)
Industrial
Media Converter
Network Redundancy
Industrial
Ethernet Switch
Software Features
Hardware routing, RIP and static routing
IEEE 1588v2 clock synchronization
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
DNS client proxy
SMTP Client
LED Indicators
Green : Power LED x 2
Ring Master Indicator (R.M.)
Fault Indicator (Fault)
Green : Indicates that the system is operating in O-Ring Master mode
Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF)
Green : System resets to default configuration
Supervisor Login Indicator (RMT)
Green : System is accessed remotely
Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button
Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28
O-Ring Indicator (Ring)
Smart LED Display system
Fault Contact
Relay
Relay output to carry capacity of 1A at 24VDC
Industrial Cellular
VPN Router
Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2)
Industrial Wireless
Access Point
Power Indicator (PWR)
Power
Dual 24/48VDC (20~72VDC) power inputs at terminal block Dual 88~264VAC / 100~370VDC power inputs at terminal block
Power Consumption (Typ.)
46Watts max.
Overload Current Protection
Present
43.5Watts max.
Physical Characteristics
Enclosure
19-inch rack-mountable
Dimensions (W x D x H)
440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
Weight (g)
6450 g
6600g
Operating Temperature
Operating Humidity
Accessories
Environmental
Storage Temperature
Industrial
M2M Gateway
Redundant power input modular
-40 to 85°C (-40 to 185°F )
10G SFP+ module absent : -40 to 85°C (-40 to 185°F )
10G SFP+ module used: -20 to 60 °C (-4 to 140°F )
5% to 95% Non-condensing
Network
Management Software
D esign ed for R u gged E xcellence
1-41
Regulatory Approvals
Power Automation
IEC 61850-3, IEEE 1613
EMI
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
5 years
EMS
Industrial Ethernet Switch
1
Warranty
Ordering Information
Model Name
Available
Model
Description
RGS-PR9000-LV
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, low-voltage power
input
RGS-PR9000-HV_US
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
input, US power cord
RGS-PR9000-HV_EU
Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots, high-voltage power
input, EU power cord
Packing List
‧RGS-PR9000
‧ORing Tool CD
‧Quick Installation Guide
‧Rack-Mount Kit
‧Console Cable
Optional Accessories (Can be purchased separately)
‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices
‧SFP100 series : 100Mbps SFP optical transceiver
‧SFP 1G series : 1Gbps SFP optical transceiver
‧SFP 10G series : 10Gbps SFP optical transceiver
‧DR-75 series : 75 Watts DIN-Rail power supply
‧DR-120 series : 120 Watts DIN-Rail power supply
Optional Module
1-42
SWM-80GT
Industrial 8-port Gigabit Ethernet switch module with
8x10/100/1000Base-T(X) ports
SWM-08GP
Industrial 8-port Gigabit fiber module with
8x100/1000Base-X, SFP socket
SWM-02GP+
Industrial 2-port 10G SFP+ module with 2x10GBase-X),
SFP+ socket
SWM-04GP+
Industrial 4-port 10G SFP+ module with 4x10GBase-X
SFP+ ports
SWM-04GF-MM/SS-SC
Industrial 4-port Gigabit fiber module with 4x1000BaseFX SC Fiber ports
SWM-04FX-MM/SS-SC
Industrial 4-port fiber module with 4x100Base-FX SC
Fiber ports
SWM-04GF-MM/SS-ST
Industrial 4-port Gigabit fiber module with 4x1000BaseFX ST Fiber ports
SWM-04FX-MM/SS-ST
Industrial 4-port fiber module with 4x100Base-FX ST
Fiber ports
w w w.oring - net wo rk in g.co m