Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch Introduction This high-performance Managed Layer 2/3 switch provides twenty-four 10/100 Mbps Ethernet ports and two Gigabit Ethernet ports for fast connection speeds and flexibility in a 6U CompactPCI* form-factor board. The PICMG* 2.16-compliant, in-chassis switch minimizes external wiring, thus improving density and reliability. Console access is enabled through an RS-232 serial cable to configure SNMP, Telnet, CLI and RMON management functionalities. The ZT 8101 features an easy-to-use browser/Web-based management console. It routes and switches at full wire speed utilizing non-blocking architecture, and has sophisticated multicast protocols to limit unnecessary traffic. Additionally it provides an in-chassis switch fabric that can operate in a redundant configuration. The PICMG 2.16 Packet Switching Backplane Specification blends the benefits of CompactPCI with the broad acceptance of Ethernet. Intel's high-performance building blocks simplify development and provide an economical, scalable path to the next-generation Internet and voice communications network. Highlights Rich Feature Set T Full wire speed on all ports T VLAN IEEE* 802.1Q - ID tagging, 802.1p priority T Link aggregation T Packet filtering and port security T Multicast and broadcast storm control T GVRP/GMRP VLAN and multicast registration T DHCP/BootP packet forwarding T RIPv1, RIPv2 routing, DVMRP, PIM (dense mode) T Port mirroring T Low port latency T Hot-swappability with LED indication for RSS Front-Panel Features T Two 10/100 RJ-45 ports T Two 100/1000 RJ-45 ports T RS-232 serial console port T Status LEDs for Ethernet port link, speed and activity Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch Standard Features Layer 2 Switching Functions T T T T T T T T T T T T T T T T T T T 10BASE-T/100BASE-TX/1000BASE-T port functions 22 10/100 Fast Ethernet ports to the mid-plane connectors 2 10/100 Fast Ethernet ports (RJ-45) on the front panel 2 100/1000BASE-T Ethernet ports (R-J45) on the front panel Auto-negotiation function for 10M/100M or 100M/1000M speed, duplex (full and half) and flow-control Auto polarity and auto MDI/MDI-X Back pressure flow control support in half-duplex mode IEEE 802.3x-compliant flow control support in full-duplex 8.8 Gbps switching fabric capacity Store and forward packet forwarding mode 8000 entry MAC address forwarding table Multicast and broadcast storm control function Port mirroring Link aggregation 802.1D Spanning Tree 802.1Q tagged VLAN GVRP (GARP VLAN registration protocol) for automatic VLAN configuration distribution 802.1p priority (four priority queues) IGMP snooping with broadcast control Layer 3 Switching Functions T T T T T T T T T T T T T Wire speed IP forwarding rate Hardware-based Layer 3 IP switching 2000 entry IP address forwarding table RIP-I/II routing protocol IPv4 IGMPv2 PIM dense mode DVMRPv3 IP multi-netting IP fragmentation Path MTU discovery 802.1D frame DHCP/BootP relay Traffic Classification and Prioritization T T T Based on 802.1p priority bits Based on IP source and destination address Four priority queues Management Capabilities T T T T T T T T T T RS-232 port for out-of-band management and system diagnosis Telnet remote control console SNMPv1 agent RMON 4 groups—statistics, history, alarm, event Manageable via IPMI (Q2,02) Web-based TFTP IP filtering on management interface DHCP client Password-enabled Warranty T 2 years Specifications and Order Options The most current product specifications and order options are posted on the Web version of this data sheet (http://developer.intel.com/design/network/products/ cbp/zt8101.htm). Product Information and Sales Support T T T www.intel.com (805) 541-0488 ZiatechInfo@Intel.com Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel® and NetStructure™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. © Intel Corporation 2001. All rights reserved. ZT8101 Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch Specifications Regulatory Compliance Electrical CE Certification T The ZT 8101 10/100 Ethernet Switch meets intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low-Voltage Directive 73/23/EEC for Product Safety. Compliance was demonstrated to the following specifications as listed in the Official Journal of the European Communities: T Less than 35W power consumption 3.3V, 5.0V, 12V supplies Power Req. Typical Supply Supply Supply Supply Supply Supply +5VDC +5%, -3% 4A +3.3VDC +5%, -3% 6A +12VDC ±10% 20mA Voltage, Vcc Current, Vcc=5.0VDC Voltage, V3.3V Current, V3.3V=3.3VDC Voltage, V12.0V Current, V12V=12.0V Mechanical T T T Measures 9.2" x 6.3" (233.35 mm x 160 mm) Width: 0.8" (1 slot - 4HP) Connector: IEC-1076-4-101 (J1-J5) Safety T T T Emissions Test Regulations T T Environmental T T T T T Operating Temperature (requires 200 LFM airflow): 0 to 50 C Storage Temperature: -25 to +55 C Non-Condensing Relative Humidity: less than 95% at 40 C T T T T T T T T T T T T FCC Part 15, Subpart B EN 55022 CISPR 22 Bellcore GR-1089 EN 50081-1 Emissions Standards PICMG 2.16 R1.0 CompactPCI Packet Switching Backplane Specification PICMG 2.9 R1.0 CompactPCI System Management (Q2,02) Designed for NEBS 802.1D Spanning Tree 802.1Q Tagged VLAN MIB, MIB-II, Bridge MIB, RIP MIB, CIDR MIB, 802.1p MIB IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, and IEEE 802.3ab 1000BASE-T IEEE 802.1D, 802.1P, 802.3, 802.3u, 802.3ab, 802.3ac, 802.3ad, 802.3x, 802.1Q RFC 768, 783, 791/950, 792, 826, 854, 855, 856, 857, 1058, 1519, 1542, 1723, 2068, 2113, 2328, 2131, 2236 UL/cUL 60950 Safety for Information Technology Equipment EN/IEC 60950 Safety for Information Technology Equipment CB Report Scheme CB Certificate and Report T T GR-1089-CORE Sections 2 and 3 EN 55022 Class A Radiated EN 55022 Power Line Conducted Emissions EN 61000-3-2 Power Line Harmonic Emissions EN 61000-3-3 Power line Fluctuation and Flicker EN 55024 Immunity T T T T T T T GR-1089-CORE Sections 2 and 3 EN 61000 4-2 Electro-static Discharge (ESD) EN 61000 4-3 Radiated Susceptibility EN 61000 4-4 Electrical Fast Transient Burst EN 61000 4-5 Power Line Surge EN 61000 4-6 Frequency Magnetic Fields EN 61000 4-11 Voltage dips, Variations, & Short Interruptions Order Information T ZT 8101 A single version of the ZT 8101 10/100 Ethernet Switch is available, as described in this data sheet. It is designed for interoperability within third-party 2.16-compliant platforms. Please contact Intel Sales Support for additional information.