ManualsLib - Makes it easy to find manuals online!

User’s Guide
Learn how to use
your Fujitsu LifeBook
E8410 notebook
Downloaded from www.Manualslib.com manuals search engine
Copyright and Trademark Information
Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as
ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents
of this document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.
Intel, Intel Core, Centrino, and Intel Centrino Pro are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the
United States and other countries.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any
use of such marks by Fujitsu Computer Systems Corporation is under license.
PCMCIA is a trademark of the Personal Computer Memory Card International Association.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
OmniPass is a trademark of Softex, Inc.
Roxio is a trademark of Roxio, a division of Sonic Solutions.
PowerProducer is a trademark of CyberLink Corp.
NVIDIA and GeForce are trademarks or registered trademarks of NVIDIA Corporation.
ArcSoft is a trademark of ArcSoft Incorporated.
Adobe, Acrobat, and Acrobat Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
Norton and Norton Internet Security are trademarks or registered trademarks of Symantec Corporation in the United States and other
countries.
Downloaded from www.Manualslib.com manuals search engine
The DVD player found in some models of the LifeBook notebook incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights users.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
All other trademarks mentioned herein are the property of their respective owners.
WARNING
HANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
WASH HANDS AFTER HANDLING.
© Copyright 2007 Fujitsu Computer Systems Corporation. All rights reserved.
No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication
may be stored or transmitted in any electronic form without the written consent of Fujitsu.
B5FJ-3951-01EN-00
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name:
Fujitsu Computer Systems Corporation
Address:
1250 E. Arques Avenue, M/S 122
Sunnyvale, CA 94085
Telephone:
(408) 746-6000
Declares that product:
Base Model Configuration:
LifeBook E8410 notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device may not cause harmful interference, (2) This device must accept any interference received,
including interference that may cause undesired operation.
Downloaded from www.Manualslib.com manuals search engine
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current
of 5.27 A (100 W).
+
AC adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
•
Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
•
•
•
Avoid using the modem during an electrical storm. There may be a remote risk of electric shock from lightning.
•
•
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.
Do not use the modem to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with
local codes for possible special disposal instructions.
For TV tuner use: To protect from overvoltages and transients on the Cable Distribution System, make sure that the outer shield of
the coaxial cable is connected to earth (grounded) at the building premise as close to the point of cable entrance as practicable, as
required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV installation, contact your service
provider.
SAVE THESE INSTRUCTIONS
Downloaded from www.Manualslib.com manuals search engine
For Authorized Repair Technicians Only
DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTION.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND
RATING FUSE.
System Disposal
Hg
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE, OR FEDERAL LAWS.
Copyright and Trademark Information 5
Downloaded from www.Manualslib.com manuals search engine
Contents
Preface
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 1
Getting to Know Your LifeBook
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Locating the Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back Panel Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
16
19
20
22
Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC Adapter Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Level Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Charging Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Downloaded from www.Manualslib.com manuals search engine
24
25
25
26
Wireless Radio Emission Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Optical Drive Access Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Hard Drive Access Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PC Card Access Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
NumLk Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CapsLock Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ScrLk Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Security Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Touchpad Pointing Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Clicking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Double-Clicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Dragging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Touchpad Control Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Scrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Optional Quick Point Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Controlling the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Flexible Bay Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Removing and Installing Modular Devices . . . . . . . . . . . . . . . . . . . . . . . . 36
LifeBook Security/Application Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting up Your LifeBook Security Panel . . . . . . . . . . . . . . . . . . . . . . . . . 39
Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Operating Your LifeBook Security/Application Panel. . . . . . . . . . . . . . . . 41
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Uninstalling the Security Panel Application. . . . . . . . . . . . . . . . . . . . . . . . 43
Launching Applications with the Security/Application Panel . . . . . . . . . . 45
Downloaded from www.Manualslib.com manuals search engine
Chapter 2
Getting Started with Your LifeBook
Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Connecting the Power Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Opening the Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Adjusting Display Panel Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Closing the Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Starting Your LifeBook Notebook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Hard Disk Drive Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Booting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Starting Windows Vista the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Starting Windows XP the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Registering Your LifeBook notebook with Fujitsu . . . . . . . . . . . . . . . . . . 58
Installing Click Me! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Fujitsu Driver Update Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Power/Suspend/Resume Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Hibernation (Save-to-Disk) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Windows Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Restarting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Powering Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
3
Downloaded from www.Manualslib.com manuals search engine
Chapter 3
User-Installable Features
Lithium ion Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Recharging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Optical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Media Player Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Loading Media on Your Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Removing Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Emergency Optical Drive Tray Release . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using the Media Player Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using Media Player on Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Memory Stick/Secure Digital Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Installing Memory Stick/SD Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Removing A Memory Stick/SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PC Cards/ExpressCards™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Installing PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Removing PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Installing ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Removing ExpressCards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Memory Upgrade Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Installing Memory Upgrade Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Removing a Memory Upgrade Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Checking the Memory Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
4
Downloaded from www.Manualslib.com manuals search engine
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Modem (RJ-11) Telephone Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Internal LAN (RJ-45) Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Parallel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Port Replicator Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Universal Serial Bus Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Infrared Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
IEEE 1394 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Microphone Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
External Video Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Chapter 4
Troubleshooting Your LifeBook
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Identifying the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Power On Self Test Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Emergency Media Player Drive Tray Release . . . . . . . . . . . . . . . . . . . . . . 119
Modem Result Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Restoring Your Pre-installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Re-installing Individual Drivers and Applications . . . . . . . . . . . . . . . . . . . 120
Restoring the Factory Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Automatically Downloading Driver Updates . . . . . . . . . . . . . . . . . . . . . . . 123
5
Downloaded from www.Manualslib.com manuals search engine
Chapter 5
Care and Maintenance
Caring for your LifeBook Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Cleaning your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Storing your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Traveling with your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Floppy Disks and Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
PC Cards/ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Chapter 6
System Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Mass Storage Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Popular Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Pre-Installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Learning About Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
6
Downloaded from www.Manualslib.com manuals search engine
Glossary/Regulatory
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Appendix A: WLAN User’s Guide
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Wireless LAN Device Covered by this Document. . . . . . . . . . . . . . . . . . . 169
Characteristics of the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . 172
Deactivation Using the Wireless On/Off Switch . . . . . . . . . . . . . . . . . . . . 173
Disconnection Using the Icon in the Taskbar. . . . . . . . . . . . . . . . . . . . . . . 173
Activating the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Configuring the Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Configuring the WLAN Using Windows Vista . . . . . . . . . . . . . . . . . . . . . 174
Configuring the WLAN Using Windows XP . . . . . . . . . . . . . . . . . . . . . . 175
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Troubleshooting the WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
WLAN Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Using the Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
What is Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Where to Find Information About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 187
7
Downloaded from www.Manualslib.com manuals search engine
Appendix B: Fingerprint Sensor Device
Introducing the Optional Fingerprint Sensor Device . . . . . . . . . . . . . . . . 189
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Installing OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
User Enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Using OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Configuring OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
OmniPass Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
8
Downloaded from www.Manualslib.com manuals search engine
Preface
About This Guide
The LifeBook E8410 notebook from Fujitsu Computer Systems Corporation provides desktop
performance with a fast, Intel® Core™ 2 Duo processor. Depending upon the configuration, your
notebook has either a built-in 15.4” TFT WXGA or WSXGA+ color display. This system brings the
computing power of desktop personal computers (PCs) to a portable environment.
Your computer comes with Microsoft Windows® XP Professional or Windows Vista Business
operating system pre-installed.
This manual explains how to operate your LifeBook notebook’s hardware and built-in system
software.
Conventions Used in the Guide
Keyboard and on-screen keys appear in brackets. Example: [Fn], [F1], [ESC], [ENTER] and [CTRL].
Pages with additional information about a specific topic are cross-referenced within the text.
For example: (“See Installation Procedure on page 43”.)
On screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”.
DOS commands you enter appear in Courier type. Example: “Shutdown the computer?”
9
Downloaded from www.Manualslib.com manuals search engine
THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF
THE SUBJECT MATERIAL.
THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR
PLEASE READ ALL CAUTION INFORMATION
CAREFULLY.
COMPUTER, OR TO THE INTEGRITY OF YOUR FILES.
THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR
LIFEBOOK NOTEBOOK, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY.
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
• Toll free: 1-800-8Fujitsu (1-800-838-5487)
• E-mail: 8fujitsu@us.fujitsu.com
• Website: http://www.computers.us.fujitsu.com/support
Before you place the call, you should have the following information ready so that the customer
support representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
10 - Preface
Downloaded from www.Manualslib.com manuals search engine
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Type of device connected, if any
Fujitsu Shopping Online
You can go directly to the online by going to the website at: www.shopfujitsu.com.
YOU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE URL LINKS.
Limited Warranty
Your LifeBook notebook is backed by a Fujitsu International Limited Warranty. Check the service kit
that came with your notebook for the Limited Warranty period and terms and conditions.
11 - Preface
Downloaded from www.Manualslib.com manuals search engine
Chapter 1
Getting to Know Your LifeBook
Overview
This section describes the
components of your Fujitsu
LifeBook E8410 notebook. We
strongly recommend that you
read it before using your
notebook – even if you are
already familiar with notebook
computers.
Fujitsu LifeBook E8410 notebook
12
Downloaded from www.Manualslib.com manuals search engine
Locating the Controls and Connectors
Stereo Speaker
Display Panel
Quick Point
Cursor Control
Status Indicator Panel
LifeBook Security/
Application Panel
Power/Suspend/
Resume Button
Stereo Speaker
Wireless LAN/Bluetooth
On/Off Switch
Keyboard
IrDA Sensor
Memory Stick/SD Card Slot
Display Panel Latch Button
Touchpad Pointing Device
LifeBook notebook with display open
13 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Top Components
The following is a brief description of your LifeBook notebook’s top components.
Display Panel
The display panel is a color LCD panel with back lighting for the display of text and graphics.
Status Indicator Panel
The Status Indicator Panel displays symbols that correspond with a specific component of your
LifeBook notebook. See “Status Indicator Panel” on page 24.
LifeBook Security/Application Panel
The LifeBook Security/Application Panel provides hardware security and one-touch application launch
capability. See “LifeBook Security/Application Panel” on page 38.
Power/Suspend/Resume Button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off,
resume your LifeBook notebook from suspend mode, and power on your notebook when it has been
shut down from Windows. See “Power/Suspend/Resume Button” on page 60.
Stereo Speakers
The built-in dual speakers allow for stereo sound.
Keyboard
A full-size keyboard with dedicated Windows keys. See “Keyboard” on page 28.
Touchpad Pointing Device
The Touchpad pointing device is a mouse-like cursor control with five buttons: two right mouse-like
buttons, two left mouse-like buttons, and a scroll button. The upper left and right buttons are for use
with the Quick Point cursor control. See “Touchpad Pointing Device” on page 31. Depending upon
the configuration of your system, the scroll button may be configured as a fingerprint sensor device.
See “Appendix B: Fingerprint Sensor Device” on page 189.
14 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Display Panel Latch Button
The display panel latch button is used to latch and unlatch the display. See “Opening the Display
Panel” on page 50.
Memory Stick/SD Card Slot
The Memory Stick/SD card slot allows you to install a Memory Stick or a Secure Digital (SD) card
for data storage. This architecture allows you to transfer data from a variety of different digital devices.
See “Installing Memory Stick/SD Cards” on page 79.
Wireless LAN/Bluetooth On/Off Switch
The wireless LAN/Bluetooth on/off switch is used to turn on and off the optional WLAN and
Bluetooth devices. Switching the device off when not in use will help to extend battery life. See
“Activating the WLAN Device” on page 173.
IrDA Sensor
Provides an infrared interface for communication with devices IrDA Standard Rev.1.1-compliant.
Quick Point Cursor Control
The optional Quick Point control offers an additional method for moving the cursor. See “Optional
Quick Point Feature” on page 34.
15 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Microphone Jack
ExpressCard Slot (top slot)
IEEE 1394 Jack
ExpressCard
Eject Button
Modem (RJ-11) Jack
DC Power Jack
USB 2.0 Ports
Headphone/Optical Digital Audio Out Jack
Smart Card Slot
Air Vents
PC Card Slot (bottom slot)
PC Card
Eject Button
LifeBook notebook left-side panel
Left-Side Panel Components
The following is a brief description of your LifeBook notebook’s left-side components.
Microphone Jack
The microphone jack allows you to connect an external mono microphone. See “Microphone Jack”
on page 97.
Modem (RJ-11) Telephone Jack
The Modem (RJ-11) telephone jack is for attaching a telephone line to the internal multinational 56K
modem. See “Modem (RJ-11) Telephone Jack” on page 90.
16 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
THE INTERNAL MODEM IS NOT INTENDED FOR USE WITH DIGITAL PBX SYSTEMS. DO NOT CONNECT
THE INTERNAL MODEM TO A DIGITAL PBX AS IT MAY CAUSE SERIOUS DAMAGE TO THE INTERNAL
MODEM OR YOUR ENTIRE NOTEBOOK. CONSULT YOUR PBX MANUFACTURER’S DOCUMENTATION FOR
DETAILS. SOME HOTELS HAVE DIGITAL PBX SYSTEMS. BE SURE TO FIND OUT BEFORE YOU CONNECT
YOUR MODEM.
THE INTERNAL MULTINATIONAL MODEM IS DESIGNED TO THE ITU-T V.90/V.92 STANDARD. ITS
53000 BPS IS THE HIGHEST ALLOWED BY FCC, AND ITS ACTUAL CONNECTION
RATE DEPENDS ON THE LINE CONDITIONS. THE MAXIMUM SPEED IS 33600 BPS AT UPLOAD, IN
ACCORDANCE WITH FCC REGULATIONS.
MAXIMUM SPEED OF
FOR ADDITIONAL INFORMATION ABOUT THE MODEM, REFER TO THE FUJITSU WEBSITE AT:
US.FUJITSU.COM/COMPUTERS.
IEEE 1394 (4-pin) Jack
The 4-pin 1394 jack is used to connect between your notebook and an IEEE 1394 peripheral such as
a digital video camera. See “IEEE 1394 Port” on page 95.
ExpressCard Slot
The ExpressCard slot allows you to install an ExpressCard. See “PC Cards/ExpressCards™” on
page 80.
ExpressCard Eject Button
The ExpressCard eject button is used for removing an ExpressCard from the slot.
PC Card Eject Button
The PC Card eject button is used for removing a PC Card from the slot.
PC Card Slot
The PC Card Slots allow you to install a Type I or Type II PC Card. See “PC Cards/ExpressCards™”
on page 80.
17 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Smart Card Slot
A dedicated Smart Card slot is provided on your notebook. Smart Cards are the same size and shape
as credit cards, but they contain an integrated microprocessor chip. See “Smart Card Reader” on
page 85. In order to use the embedded Smart Card Reader, you must purchase optional third-party
software for installation.
Air Vents
The air vents are used to cool the system to prevent overheating.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE PERFORMANCE, BE SURE TO KEEP ALL
AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC
CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
DO NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
USB 2.0 Ports
The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to
480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12 Mbps.
See “Universal Serial Bus Ports” on page 94.
Headphone/Optical Digital Audio Out Jack
The headphone/optical digital audio jack allows you to connect headphones. See “Optical Digital
Audio Connector” on page 46.
DC Power Jack
The DC power jack allows you to plug in the AC adapter to power your LifeBook notebook and charge
the internal Lithium ion battery.
18 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Anti-Theft Lock Slot
Flexible Bay
Flexible Bay Release Latch
LifeBook notebook right-side panel
Right-Side Panel Components
The following is a brief description of your LifeBook notebook’s right-side components.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional physical lock down device.
Flexible Bay
The Flexible Bay can accommodate one of the following devices. See “Flexible Bay Devices” on
page 36.
• Modular DVD-ROM drive
•
•
•
•
•
Modular DVD/CD-RW combo drive
Modular Dual-Layer Multi-Format DVD Writer
Modular Lithium ion battery
Modular second hard disk drive
Weight Saver
Flexible Bay Release Latch
The Flexible Bay release latch releases the Flexible Bay device.
19 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Anti-Theft Lock Slot
Air Vents
USB 2.0 Ports
Parallel Port
Serial Port
S-Video Out Port
Gigabit LAN (RJ-45) Jack
External Video Port
LifeBook notebook back panel
Back Panel Components
Following is a brief description of your LifeBook notebook’s back panel components.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional physical lock down device.
USB 2.0 Ports
The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to
480Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12Mbps. See
“Universal Serial Bus Ports” on page 94.
20 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Serial Port
The serial port allows you to connect serial RS-232 devices, such as serial printers or serial scanners.
See “Serial Port” on page 48.
Gigabit LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T)
Ethernet LAN connection. See “Internal LAN (RJ-45) Jack” on page 91.
Air Vents
The air vents allow air to circulate through the system to cool down the components.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE PERFORMANCE, BE SURE TO KEEP ALL
AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC
CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
DO NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
Parallel Port
The parallel port allows you to connect parallel devices, such as a printer. (This is also sometimes
referred to as an LPT port.) See “Parallel Port” on page 48.
External Video Port
The external monitor port allows you to connect an external monitor or LCD projector. See “External
Video Port” on page 97.
S-Video Out Port
The S-Video output is used to transmit a higher resolution video signal to a compatible TV or VCR.
See “S-Video Out Port” on page 47.
21 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Air Vents
Lithium ion
Battery Bay
Memory Upgrade
Compartment
Port Replicator
Connector
LifeBook notebook bottom panel
Bottom Components
The following is a brief description of your LifeBook notebook’s bottom panel components.
Memory Upgrade Compartment
Your notebook comes with high speed Double Data Rate 2 Synchronous Dynamic RAM (DDR2
SDRAM). The memory upgrade compartment allows you to expand the system memory capacity of
your notebook, thus improving overall performance. See “Memory Upgrade Module” on page 86.
Under normal circumstances, it should not be necessary to open this compartment.
22 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Air Vents
The air vents allow air to circulate through the system to cool down the components.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO
KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE
PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
DO NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
Lithium ion Battery Bay
The battery bay contains the internal Lithium ion battery. It can be opened for the removal of the
battery when stored over a long period of time or for swapping a discharged battery with a charged
Lithium ion battery. See “Lithium ion Battery” on page 65.
Port Replicator Connector
This connector allows you to connect the optional Port Replicator to your notebook.
23 - Getting to Know Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Battery
Battery
Charging
Identifier
Battery
AC Adapter
Level
Power
Wireless
Radio
Emission
Indicator
Hard Drive
Access
NumLk
ScrLk
CapsLk
Security
PC Card
Optical Drive
Access
Access
(PC Card Slot)
Status Indicator Panel
Status Indicator Panel
The Status Indicator displays symbols that correspond with a specific component of your Fujitsu
LifeBook notebook. These symbols tell you how each of those components are operating.
Power Indicator
The Power indicator symbol states whether your system is operational. It has several different states,
each of which tells you the mode your notebook is in.
• Steady On: This means that there is power to your LifeBook notebook and that it is ready for use.
24
Downloaded from www.Manualslib.com manuals search engine
• Flashing: This means that your notebook is in Suspend mode.
• Steady Off: This means that your notebook is either in Save-to-Disk mode, or it has been turned off.
AC Adapter Indicator
The AC Adapter indicator shows whether your notebook is operating from the AC adapter,
Auto/Airline adapter or battery(s). This icon has two different states that can tell you what power
source your notebook is using.
• On: This means that either of the adapters are currently in use.
• Off: Power is only coming from the batteries, and you do not have an adapter connected.
Battery Level Indicators
76%–100% Charging
The two Battery Level indicators state whether
or not the primary Lithium ion battery and/or
the optional second Lithium ion battery are installed
(Battery 1 refers to the primary Lithium ion battery,
while Battery 2 refers to the Flexible Bay optional
second battery). In addition, this symbol states how
much charge is available within each installed battery.
The symbol will only be displayed for a battery that is
currently installed in your LifeBook notebook.
76%–100%
51%–75%
26%–50%
11%–25%
Low Warning <11%
Critical Low or
Dead Battery
Shorted Battery
25
Downloaded from www.Manualslib.com manuals search engine
Battery Charging Indicators
Located to the left of each Battery Level indicator is a small arrow symbol. This symbol states whether
that specific battery is charging. This indicator will flash if the battery is too hot or cold to charge.
BATTERIES SUBJECTED TO SHOCKS, VIBRATION OR EXTREME TEMPERATURES CAN BE PERMANENTLY
DAMAGED.
Wireless Radio Emission Indicator
The Wireless Radio Emission indicator appears when the Wireless LAN or Bluetooth are emitting.
Optical Drive Access Indicator
The Optical Drive Access indicator tells you that the DVD/CD-RW/CD-ROM drive is being accessed.
If the Auto Insert Notification function is active, the indicator will flash periodically when your system
is checking the DVD/CD-RW/CD-ROM drive. If the Auto Insert Notification function is not active,
the indicator will only flash when you access the DVD/CD-RW/CD-ROM drive. The default setting
is the Auto Insert Notification function active.
THE DVD/CD-RW/CD-ROM AUTO INSERT NOTIFICATION FUNCTION WILL PERIODICALLY CHECK FOR
DVD/CD-RW/CD-ROM INSTALLED IN THE DRIVE, CAUSING THE DVD/CD-RW/CD-ROM ACCESS
INDICATOR TO FLASH. THE DVD/CD-RW/CD-ROM AUTO INSERT NOTIFICATION FUNCTION ALLOWS
YOUR SYSTEM TO START A DVD/CD-RW/CD-ROM AUTOMATICALLY AS SOON AS IT IS INSERTED IN
THE DRIVE AND THE TRAY IS CLOSED. IT WILL BEGIN PLAYING AN AUDIO DVD/CD OR WILL START AN
APPLICATION IF THE DVD/CD HAS AN AUTO-RUN FILE
A
26
Downloaded from www.Manualslib.com manuals search engine
Hard Drive Access Indicator
The Hard Drive Access indicator shows whether your internal hard drive is being accessed.
THE HARD DRIVE ACCESS INDICATOR DOES NOT SHOW WHICH HARD DRIVE IS BEING ACCESSED.
PC Card Access Indicator
The PC Card Access indicator shows whether or not your notebook is accessing a PC Card. The
indicator will flash if your software tries to access a PC Card even if there is no card installed. See “PC
Cards/ExpressCards™” on page 80.
NumLk Indicator
The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode.
CapsLock Indicator
The CapsLock indicator states that your keyboard is set to type in all capital letters.
ScrLk Indicator
The ScrLk indicator states that your scroll lock is active.
Security Indicator
The Security Indicator flashes (if a password was set) when the system resumes from Off or Standby
mode. You must enter the password that was set in the Security Panel before you can resume operation.
27
Downloaded from www.Manualslib.com manuals search engine
Keyboard
Function Keys
Home
Fn Key Start Key
Application Key
Numeric Keypad
(surrounded by heavy line)
End
Cursor Keys
Keyboard
Using the Keyboard
Your Fujitsu LifeBook notebook has an integral 84-key keyboard. The keys perform all the standard
functions of a 101-key keyboard, including the Windows keys and other special function keys. This
section describes the following keys.
28
Downloaded from www.Manualslib.com manuals search engine
• Numeric keypad: Your notebook allows certain keys to serve dual purposes, both as standard
characters and as numeric and mathematical keys. The ability to toggle between the standard
character and numerical keys is controlled through the [NumLk] key.
• Cursor keys: Your keyboard contains four arrow keys for moving the cursor or insertion point to
the right, left, up, or down within windows, applications and documents.
• Function keys: The keys labeled [F1] through [F12], are used in conjunction with the [Fn] key to
produce special actions that vary depending on what program is running.
• Windows keys: These keys work with your Windows operating system and function the same as
the onscreen Start menu button, or the right button on your pointing device.
Numeric Keypad
Certain keys on the keyboard perform dual functions as both standard character keys and numeric
keypad keys. NumLk can be activated by pressing the [NumLk] keys. Turning off the NumLk feature
is done the same way. Once this feature is activated you can enter numerals 0 through 9, perform
addition ( + ), subtraction ( - ), multiplication ( * ), or division ( / ), and enter decimal points ( . ) using
the keys designated as ten-key function keys. The keys in the numeric keypad are marked on the front
edge of the key to indicate their secondary functions.
Windows Keys
Your LifeBook notebook has two Windows keys, consisting of a Start key and an Application key. The
Start key displays the Start menu. This button functions the same as your onscreen Start menu button.
The Application key functions the same as your right mouse button and displays shortcut menus for
the selected item. (Please refer to your Windows documentation for additional information regarding
the Windows keys.)
Cursor Keys
The cursor keys are the four arrow keys on the keyboard which allow you to move the cursor up, down,
left and right in applications. In programs such as Windows Explorer, it moves the “focus” (selects the
next item up, down, left, or right).
29
Downloaded from www.Manualslib.com manuals search engine
Function Keys
Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys
differ for each application. You should refer to your software documentation to find out how these
keys are used.
• The [Fn] key provides extended functions for the notebook and is always used in conjunction with
another key.
• [Fn+F3]: Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.
• [Fn+F4]: Pressing [F4] while holding [Fn] will toggle the Quick Point feature on and off. Note that
the [Fn+F4] combination only works if Manual Setting is selected in the BIOS. (See “BIOS Setup
Utility” on page 54)
• [Fn+F6]: Pressing [F6] repeatedly while holding [Fn] will lower the brightness of your display.
• [Fn+F7]: Pressing [F7] repeatedly while holding [Fn] will increase the brightness of the display.
• [Fn+F8]: Pressing [F8] repeatedly while holding [Fn] will decrease the volume of your LifeBook
notebook.
• [Fn+F9]: Pressing [F9] repeatedly while holding [Fn] will increase the volume of your LifeBook
notebook.
• [Fn+F10]: Pressing [F10] while holding [Fn] allows you to change your selection of where to send
your display video. Each time you press the combination of keys you will step to the next choice.
The choices, in order, are: built-in display panel only, external monitor only, and both built-in
display panel and external monitor.
30
Downloaded from www.Manualslib.com manuals search engine
Touchpad Pointing Device
Optional Quick Point Control
Left Buttons
Scroll Button or
Optional Fingerprint
Sensor
Cursor Control
Right Buttons
Touchpad pointing device
The Touchpad pointing device comes built into your Fujitsu LifeBook notebook. It is used to control
the movement of the pointer to select items on your display panel. The Touchpad is composed of a
cursor control, two left and right buttons, and a scrolling button. The cursor control works the same
way a mouse does, and moves the cursor around the display. It only requires light pressure with the tip
of your finger. The left and right buttons function the same as mouse buttons. Note that the left and
right buttons that are located at the top of the Touchpad are designed for use with the optional Quick
Point Control, and they function in the same manner as the lower buttons. The actual functionality of
the buttons may vary depending on the application that is being used. The scrolling button allows you
to navigate quickly through pages, without having to use the scroll bars.
31 - Touchpad Pointing Device
Downloaded from www.Manualslib.com manuals search engine
•
CERTAIN E8410 LIFEBOOK NOTEBOOKS ARE EQUIPPED WITH AN OPTIONAL “QUICK POINT” BUTTON FOR
MOVING THE CURSOR. FOR MORE INFORMATION ABOUT QUICK POINT, SEE “OPTIONAL QUICK POINT FEATURE”
ON PAGE 34.
•
THE SCROLLING BUTTON MAY BE REPLACED BY AN OPTIONAL FINGERPRINT SENSOR. FOR INFORMATION ON
USING THE OPTIONAL FINGERPRINT SENSOR, REFER TO “FINGERPRINT SENSOR DEVICE” ON PAGE 99.
•
AN EXTERNAL MOUSE CAN BE CONNECTED TO EITHER THE USB OR PS/2 PORTS ON YOUR LIFEBOOK
NOTEBOOK OR THE OPTIONAL PORT REPLICATOR, AND USED SIMULTANEOUSLY WITH THE TOUCHPAD.
HOWEVER, IF YOU BOOT THE SYSTEM WITH AN EXTERNAL MOUSE CONNECTED THE TOUCHPAD WILL BE
DISABLED OR ENABLED DEPENDING ON THE SPECIFICATIONS IN YOUR BIOS SETTINGS. SEE “BIOS SETUP
UTILITY” ON PAGE 54.
Clicking
Clicking means pushing and releasing a
button. To left-click, move the cursor to the
item you wish to select, press the left button
once, and then immediately release it. To rightclick, move the mouse cursor to the item you
wish to select, press the right button once, and
then immediately release it. You also have the
option to perform the clicking operation by
tapping lightly on the Touchpad once.
32 - Touchpad Pointing Device
Downloaded from www.Manualslib.com manuals search engine
Double-Clicking
Double-clicking means pushing and releasing
the left button twice in rapid succession. This
procedure does not function with the right
button. To double-click, move the cursor to the
item you wish to select, press the left button
twice, and immediately release it. You can also
perform the double-click operation by tapping
lightly on the Touchpad twice.
Dragging
Dragging means pressing and holding the left
button, while moving the cursor. To drag,
move the cursor to the item you wish to move.
Press and hold the left button while moving the
item to its new location and then release it.
Dragging can also be done using the Touchpad.
First, tap the Touchpad twice over the item you
wish to move making sure to leave your finger
on the pad after the final tap. Next, move the
object to its new location by moving your
finger across the Touchpad, and then release
your finger.
Touchpad Control Adjustment
The Windows Control Panel allows you to customize your Touchpad with selections made from within
the Mouse Properties dialog box.
33 - Touchpad Pointing Device
Downloaded from www.Manualslib.com manuals search engine
Scrolling
Using the Scrolling button allows you to navigate through a
document quickly without using the window’s scroll bars.
This is particularly useful when you are navigating through
on-line pages. To use the Scrolling button, press the crescent
shape at the top or bottom of the button to scroll up or down
a page. When you have reached the desired section of the
page, release the button.
If your system has the optional fingerprint sensor in place of
the scrolling button, it can be used for scrolling by moving
your finger up and down over its surface. See “Appendix B:
Fingerprint Sensor Device” on page 189.
Optional Quick Point Feature
The optional Quick Point device consists of a cursor control
button at the lower center of the keyboard. It is roughly the
same size and shape as a pencil eraser. The cursor control
works the same way a mouse ball does, and moves the cursor
around the display. It only requires light pressure to move;
the more pressure you use, the faster the cursor will move.
The left and right buttons that are located at the top of the
Touchpad are designed for use with the Quick Point control,
and they function in the same manner as the lower buttons.
When used with the Quick Point button, the middle
Touchpad button allows you to scroll up and down a screen.
34 - Touchpad Pointing Device
Downloaded from www.Manualslib.com manuals search engine
Volume Control
Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other.
ANY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN. IF
YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL, THE
HARDWARE VOLUME CONTROL AND THE SOFTWARE VOLUME CONTROL WILL INTERACT WITH EACH
OTHER. IT SHOULD BE NOTED THAT IF YOU SET YOUR SOFTWARE VOLUME TO
OFF, YOU WILL OVERRIDE
THE EXTERNAL VOLUME CONTROL SETTING.
Controlling the Volume
The volume can be controlled in several different ways:
• Volume can be changed or muted from within the Volume Control in the system tray.
• Volume can be controlled with the F8 and F9 functions keys. Pressing [F8] repeatedly while holding
[Fn] will decrease the volume of your notebook. Pressing [F9] repeatedly while holding [Fn] will
increase the volume of your notebook.
• Volume can be muted by pressing the [F3] key while holding down the [Fn] key. To restore audio,
repeat the [Fn+F3] procedure.
• Volume can be controlled by many volume controls that are set within individual applications.
• Certain external audio devices you might connect to your system may have hardware volume
controls.
Each source discussed above puts an upper limit on the volume level that must then be followed by
the other sources.
We recommend that you experiment with the various volume controls to discover the optimal sound
level.
35 - Volume Control
Downloaded from www.Manualslib.com manuals search engine
Flexible Bay
Flexible Bay Release Latch
Flexible Bay
Flexible Bay Devices
Your Fujitsu LifeBook notebook contains a Flexible Bay. The Flexible Bay can house an optical drive,
a Lithium ion battery, a modular second hard disk drive and a weight saver.
Your Flexible Bay will have one of the following devices installed.
• Modular Dual-Layer Multi-Format DVD Writer: This allows you to access movies, software, and
audio DVD/CDs and record to DVD, CD, and DVD-RAM discs.
• Modular DVD/CD-RW combo drive: This allows you to access movies, software, and audio
DVD/CDs as well as to write to CDs.
• Modular DVD-ROM drive: This allows you to access software, data, video, or audio discs.
• Modular Lithium ion battery: This is a rechargeable battery that can be used to power your
LifeBook notebook when an adapter is not connected.
• Weight Saver: This is used to fill the bay when no device is needed.
Removing and Installing Modular Devices
There are two ways to remove and install modular devices in the Flexible Bay:
• Cold-swapping: swapping devices while your LifeBook notebook is powered off.
• Hot-swapping: swapping devices while your system is active using the Safely Remove Hardware
icon from your system tray.
36 - Flexible Bay Devices
Downloaded from www.Manualslib.com manuals search engine
YOU SHOULD NEVER LEAVE YOUR FLEXIBLE BAY EMPTY WHEN THE NOTEBOOK IS IN OPERATION. IF LEFT
EMPTY, DUST OR FOREIGN MATTER MAY ACCUMULATE INSIDE THE NOTEBOOK.
Cold-swapping
To cold-swap modular devices in your Flexible Bay follow these easy steps:
1
2
3
Close any open files.
4
Slide your device out until it is clear of the
bay. This will require light force.
5
Slide the device you are installing into your
notebook until it clicks into place.
6
7
It is now safe to turn your notebook back on.
Shut down your LifeBook notebook.
Pull out the Flexible Bay release latch. This
will push your device out slightly, allowing
you to remove it.
You can now access and use the device.
Flexible Bay
Release Latch
Removing/Installing
a device in the
Flexible Bay
Your LifeBook notebook will automatically detect the new device and activate it within your system.
The drive letters associated with the device will be created and listed under My Computer and
Windows Explorer.
Hot-swapping
Under Windows XP, hot-swapping is provided through the Safely Remove Hardware utility.
The icon for the utility appears in the system tray. Click on the icon and follow the on-screen
instructions.
37 - Flexible Bay Devices
Downloaded from www.Manualslib.com manuals search engine
Button 1
Button 3
Button 2
1
2
Button 4
3
4
Enter
Enter
button
LifeBook Security/Application Panel
LifeBook Security/Application Panel
A unique feature of your LifeBook notebook is the Security/Application Panel that allows you to secure
your notebook from unauthorized use. The Security/Application Panel also allows you to launch
applications with the touch of a button when your system is on.
If the security system is activated, upon starting your notebook or resuming from suspend mode the
security system requires you to enter a password code using the buttons on the Security/Application
Panel. After entering a correct password, your notebook resumes system operation.
38 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Setting up Your LifeBook Security Panel
When you receive your LifeBook notebook, the security panel application is pre-installed without any
passwords. The following sections provide detailed information on your security panel, and how to
set, change or remove passwords.
Numbered Buttons
Use these buttons to enter your password.
Enter Button
After entering the button strokes, push this button to enter the password into the LifeBook notebook.
Passwords
The user and supervisor password may be set on this notebook. A supervisor password is typically the
same for all LifeBook notebooks in a working group, office, or company to allow for system
management. Individual LifeBook notebooks in a group environment should not use a common
password. A password consists of one to five button strokes plus the [Enter] button. A valid stroke
consists of pushing one or up to four buttons simultaneously. The following are valid button strokes:
• Pushing [4] by itself
• Pushing [2] and [3] at the same time
• Pushing [1], [2], and [4] at the same time
• Pushing [1], [2], [3], and [4] at the same time
The following are valid passwords. The numbers within braces ({ }) are button strokes using more
than one button.
• {[2]+[3]}, [1], [enter]
• [4], [enter]
• {[1]+[3]}, {[2]+[3]+[4]}, [1], [4], [2], [enter]
39 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password or
setting supervisor and user passwords. You must set the supervisor password before the user password.
THE PURPOSE OF SUPERVISOR PASSWORD IS TO BE ABLE TO BYPASS THE USER PASSWORD IN CASE
THE USER PASSWORD IS FORGOTTEN. THE SUPERVISOR PASSWORD ALONE WILL NOT LOCK THE
SYSTEM. YOU MUST SET BOTH THE SUPERVISOR AND USER PASSWORDS FOR THE SECURITY PANEL TO
WORK.
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password
can bypass the user password. Depending upon your operating system, use the appropriate procedure
below.
Windows XP:
1
2
3
Go to the Start menu.
4
Follow the on-screen instructions to set the Supervisor password.
Click on Run.
Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then
press [Enter]
Windows Vista:
1
2
3
4
Go to the Start menu.
5
Follow the on-screen instructions to set the Supervisor password.
Select All Programs.
Select Accessories, then select Run.
Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then
press [Enter]
40 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Setting User Password
Windows XP:
1
2
3
4
Go to the Start menu.
Click on Programs.
Click on Security Panel Application and Set User Password.
Follow the on-screen instructions to set the user password
Windows Vista:
1
2
3
4
Go to the Start menu.
Select All Programs.
Select Security Panel Application and Set User Password.
Follow instructions to set the user password.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE.
Operating Your LifeBook Security/Application Panel
The security lock feature is in effect both when the system resumes from Off or suspend state. You will
need to enter the user password right after pressing the Suspend/Resume button. Your system will not
boot or resume from Standby without entering your supervisor/user password.
From Off State
1 Turn on your system.
2 When the Security Indicator flashes, enter the password and press [Enter] button. For example, if the password
is 22222, press button number [2] five times and press [Enter] button.
3
The notebook will boot to normal operation.
41 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
From Suspend State
1 Press your Power/Suspend/Resume button.
2 When the Security Indicator flashes, enter the password and press [Enter] button.
3 The notebook should resume normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three times in succession, the system will “beep”
for about one minute. If a valid password is entered within a minute (while system beeps), the beeping
will stop and the notebook will resume normal operation. If no password (or an invalid one) is entered
while the system beeps, the system will return to its previous locked state (suspend or off) and the
Security Indicator will go off. To reactivate the notebook after a password failure, you must press the
Power/Suspend/Resume button, then enter a correct password.
REMEMBER THE USER PASSWORD YOU SPECIFIED ON THE SECURITY PANEL APPLICATION. IF YOU
FORGET THE PASSWORD YOU WILL NOT BE ABLE TO USE YOUR COMPUTER. THE SUPERVISOR
PASSWORD CAN OVERRIDE THE USER PASSWORD.
Precautions
Opening and Closing the Cover
Closing the cover automatically places the notebook into suspend mode. Opening the cover does not
automatically place the notebook into normal operation. Instead, you must enter the proper security
password after pushing the Power/Suspend/Resume button. This setting can be changed in the Power
Options Control Panel.
Low Battery Operations
If your LifeBook notebook has low battery, pushing the Power/Suspend/Resume button only turns on
the Security Indicator. Your notebook does not unlock, the Security Indicator turns off after one
minute. To resume normal operation, first attach a power supply to the notebook. Then you may
unlock the notebook.
42 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Uninstalling the Security Panel Application
You have two options when uninstalling the security panel application:
• Uninstall the security panel application software. This will disable all security feature.
• Uninstall the security panel application with password still active. This will not allow any changes
to the password.
Uninstalling the Security Panel Application
Remove passwords when the User wants no password protection whatsoever and doesn’t want to give
anybody the utility to set a password on their computer. In this case, if passwords (supervisor, user, or
both) are set, the passwords must first be cleared BEFORE removing the application. To clear
passwords, follow same procedure in “Setting Passwords” except this time, select [Remove], enter
current password then click [Next]. When asked to confirm, select [Yes].
Removing Security Panel Application with Passwords Still Active
Using this feature will not allow any changes to the password. Depending upon your operating system,
the procedures differ slightly, as noted below.
REMOVING THE APPLICATIONS DOES NOT REMOVE THE PASSWORD. IT SIMPLY REMOVES THE UTILITY
TO CHANGE/ADD/REMOVE PASSWORDS. TO CHANGE YOUR PASSWORD YOU MUST REINSTALL THE
APPLICATION.
User:
1 Go to Start Menu, Click on Control Panel.
2 Open Add or Remove Programs (In Vista: Programs and Features) in the Control Panel.
3 Select the Security Panel Application (In Vista: Security Panel) in the list, and click Add/Remove.
4 When the Confirm File Deletion box appears, click Yes.
43 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Supervisor:
1
2
3
Go to Start Menu, Click on Control Panel.
4
When the Confirm File Deletion box appears, click Yes.
Open Add/Remove Programs Properties in the Control Panel.
Select the Security Panel Application for Supervisor (In Vista: Security Panel for Supervisor) in the list,
and click Add/Remove.
Reinstalling the Security/Application Panel
To reinstall supervisor or user security application, you will need your Drivers and Applications CD.
The Utilities/Security Application Panel folder contains two separate folders: Supervisor and User.
The setup files for supervisor and user security applications are contained in those folders.
1
Go to the Utilities/Security Application Pane/Supervisor folder on the CD and double-click the setupS.exe
file. (In Vista, the path is: Utilities/SAP/Vista/Supervisor/SetupS.exe). The Installing Security Panel
Application window will appear. Follow the instructions on the screen.
2
Go to the Utilities/Security Application Panel/User folder on the CD and double-click the setup.exe file.(In
Vista, the path is: Utilities/SAP/Vista/Setup.exe) The Installing Security Panel Application window will appear.
Follow the instructions on the screen.
Supervisor and user passwords can be set via Windows software using the FJSECS.exe and
FJSECU.exe files, respectively. FJSECU.exe for the user password cannot run without first setting a
supervisor password. You need to run FJSECS.exe first to set the supervisor password. Follow
instructions under Setting Passwords on page 40.
If you forget both passwords, contact Fujitsu Computer Systems Corporation Service and Support at
1-800-8FUJITSU (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for
unlocking a password restricted LifeBook notebook. When calling please have a valid credit card and
provide proof of ownership. You will then be given instructions on where to ship your notebook.
44 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Launching Applications with the Security/Application Panel
The security panel also enables you to launch applications with the touch of a button when your system
is on. Pressing any of the buttons will launch a user-defined application. Your notebook is pre-installed
with software utilities that let you operate and configure your LifeBook Security /Application Panel.
These utilities are found in the Start menu, under Settings -> Control Panel -> Application Panel. They
include two Application Panel Setup tabs, E-mail Setup, and Internet Setup.
Configuring your LifeBook Application Panel
When you start Windows, the LifeBook Application Panel is automatically activated. As an
application launcher, the LifeBook Application Panel is very flexible, giving you a variety of options.
To set up the Panel to best suit your needs, we have provided the Application Panel Setup utility that
quickly and easily helps you make the most of this valuable feature.
To configure your LifeBook Application Panel with Application Panel Setup:
1
2
3
4
Click on [Start].
Click on Programs.
Click on LifeBook Application Panel.
Click on Application Panel Setup. The Application Panel Setup utility will appear. There are tabs that correspond
to the application buttons on the LifeBook Application Panel. When you receive your notebook, these buttons
are pre-configured to launch specific programs, as referenced in Chapter 7 of this document.
THE TABS IN APPLICATION PANEL SETUP MAY NOT BE IN THE SAME ORDER AS THE BUTTONS ON YOUR
LIFEBOOK NOTEBOOK, PLEASE SELECT THE TAB YOU WISH TO CHANGE CAREFULLY.
45 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
To change an application associated with the Application buttons, click on the tab for the button you
would like to reconfigure – for example, Application A. Click on Browse from Start Menu, scroll
down the list of applications, click on the application you wish to launch with this button, and then
click OK. The button will now launch the new application.
The Internet tab is different. It comes set to launch your Windows default Internet browser (Internet
Explorer), unless you have changed this in Windows. In order to reconfigure it to launch another
program follow these easy steps:
1
2
3
4
Click on Other from the Internet browser box.
Click on Browse from Start Menu.
Scroll down the list of applications, and then click on the application you wish to launch with this button.
Click OK. The button will now launch the new application. If you want to return to launching your Windows
default Internet browser with this button, you need only click on “Default Internet Browser” from the Internet
browser box. Be aware that you will erase the settings for the “other application”. If you wish to go back to
launching the “other application” from this button, you will need to reconfigure it as described above.
IF YOUR SYSTEM HAS DEDICATED ONE OF THE APPLICATION LAUNCHER BUTTONS TO BE AN INTERNET
LAUNCHER, THE BUTTON CAN STILL BE CONFIGURED TO LAUNCH ANY APPLICATION YOU WISH, NOT JUST
AN INTERNET BROWSER.
When you have finished with Application Panel Setup click OK, and the new settings will take effect.
You can reconfigure your LifeBook Application Panel as often as you like.
Deactivating and Activating the LifeBook Application Panel
To deactivate the LifeBook Application Panel, follow these easy steps:
1
2
3
4
Click on Start.
Click on Programs.
Click on LifeBook Application Panel.
Click on Stop Application Panel.
46 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
To reactivate, follow the same procedure, except for step 4. Click on Activate Panel instead.
EVERY TIME YOU START WINDOWS THE LIFEBOOK APPLICATION PANEL IS ACTIVATED, EVEN IF YOU
DEACTIVATED IT BEFORE YOU SHUT DOWN.
47 - LifeBook Security/Application Panel
Downloaded from www.Manualslib.com manuals search engine
Chapter 2
Getting Started with Your LifeBook
DC Power Jack
AC Adapter
Connecting the AC Adapter
Power Sources
Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an
AC adapter or an optional Auto/Airline adapter.
48
Downloaded from www.Manualslib.com manuals search engine
Connecting the Power Adapters
The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and
charging the batteries.
Connecting the AC Adapter
1 Plug the DC output cable into the DC power jack of your LifeBook notebook.
2 Plug the AC adapter into an AC electrical outlet.
Connecting the Optional Auto/Airline Adapter
1 Plug the DC output cable into the DC power jack on your notebook.
2 Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or Access
OR
3
Plug the Auto/Airline adapter into the DC power jack on an airplane seat.
Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power
1
2
Be sure that you have at least one charged battery installed.
Remove the AC adapter or the Auto/Airline adapter.
THE LITHIUM ION BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT
EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR NOTEBOOK.
49 - Getting Started with Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Display Panel Latch
Opening the Display Panel
Display Panel
Your Fujitsu LifeBook notebook contains a display panel that is backlit for easier viewing in bright
environments and maintains top resolution through the use of active-matrix technology.
Opening the Display Panel
1
2
Press the Display Panel latch in. This releases the locking mechanism, allowing you to raise the display.
Lift the display backwards, being careful not to touch the screen, until it is at a comfortable viewing angle.
50 - Display Panel
Downloaded from www.Manualslib.com manuals search engine
Adjusting Display Panel Brightness
Once you have turned on your LifeBook notebook, you may want to adjust the brightness level of the
screen to a more comfortable viewing level. There are two ways to adjust the brightness, by using the
keyboard or the power management utility.
Using the Keyboard
Adjusting the brightness using the keyboard changes the setting only temporarily.
• [Fn+F6]: Pressing repeatedly will lower the brightness of your display.
• [Fn+F7]: Pressing repeatedly will increase the brightness of the display.
■
WHEN USING AC POWER YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT. WHEN USING BATTERY POWER YOUR BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID-LEVEL BY DEFAULT.
■
THE HIGHER THE BRIGHTNESS LEVEL, THE MORE POWER THE NOTEBOOK WILL CONSUME AND THE FASTER YOUR
BATTERIES WILL DISCHARGE. FOR MAXIMUM BATTERY LIFE, MAKE SURE THAT THE BRIGHTNESS IS SET AS LOW AS
POSSIBLE.
Closing the Display Panel
1
2
Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook.
Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from
opening unexpectedly.
51 - Display Panel
Downloaded from www.Manualslib.com manuals search engine
Starting Your LifeBook Notebook
Power On
Power/Suspend/Resume Button
The Power/Suspend/Resume button is used to turn on your LifeBook notebook from its off state. Once
you have connected your AC adapter or charged the internal Lithium ion battery, you can power on
your LifeBook notebook.
WHEN YOU TURN ON YOUR LIFEBOOK NOTEBOOK BE SURE YOU HAVE A POWER SOURCE. THIS MEANS
THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE
ADAPTER IS CONNECTED AND HAS POWER.
To turn on your LifeBook notebook from its off state, press the Power/Suspend/Resume button,
located above the keyboard to the right. When you are done working you can either leave your
notebook in Suspend mode, See “Standby Mode” on page 60., or you can turn it off See “Powering
Off” on page 63..
DO NOT CARRY YOUR LIFEBOOK NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS
OR VIBRATION, AS YOU RISK DAMAGING YOUR NOTEBOOK.
When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit
an audio warning and/or an error message will be displayed. See “Power On Self Test Messages” on
page 114. Depending on the nature of the problem, you may be able to continue by starting the
operating system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your notebook will load your operating system.
52 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
NEVER TURN OFF YOUR LIFEBOOK NOTEBOOK DURING THE POWER ON SELF TEST (POST) OR IT WILL
CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK NOTEBOOK ON THE
NEXT TIME. See “Power On Self Test Messages” on page 114.
Boot Sequence
The procedure for starting-up your notebook is termed the Bootup sequence and involves your
notebook’s BIOS. When your LifeBook notebook is first turned on, the main system memory is empty,
and it needs to find instructions to start up your notebook. This information is in the BIOS program.
Each time you power up or restart your notebook, it goes through a boot sequence which displays a
Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a
standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed
without a failure and without a request for the BIOS Setup Utility, the system displays the operating
system’s opening screen.
The boot sequence is executed when:
• You turn on the power to your LifeBook notebook.
• You restart your notebook from the Windows Shut Down dialog box.
• The software initiates a system restart. Example: When you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This
feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information
about accessing the utility.
53 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND MASTER HARD DISK
PASSWORDS, FUJITSU COMPUTER SYSTEMS WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND
HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE.
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook
notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need
to set or change the BIOS’ environment to operate your notebook.
The BIOS Setup Utility configures:
• Device control feature parameters, such as changing I/O addresses and boot devices.
• System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following (or use the TrustedCore Menu, as detailed in the next
section):
1
2
Turn on or restart your LifeBook notebook.
3
Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or
touchpad button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the following menus and information screens:
• BIOS Setup
54 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
• Diagnostic Screen
• Boot Menu
• Patent Information
• System Information
• Continue Booting
Clicking on any of the fields will invoke the screen, information, or action described.
The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the
screen.
BIOS Guide
A guide to your notebook’s BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select Support, then select Notebooks under
User’s Guides. Select LifeBook BIOS Guides from the pull-down menu for your LifeBook series. If
you are unsure of your notebook’s BIOS number, refer to your packing slip.
THE BOTTOM OF THIS NOTEBOOK COMPUTER CAN BECOME HOT WHEN USED FOR LONG PERIODS OF
TIME. WHEN USING THE NOTEBOOK, TAKE CAUTION TO LIMIT LONG TERM OR CONTINUOUS USE WHILE
RESTING IT ON EXPOSED SKIN, SUCH AS THE LAP.
Booting the System
We strongly recommend that you not attach any external devices and do not put a DVD/CD in your
drive until you have gone through the initial power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you
do nothing the system will load the operating system, and then the Windows Welcome will begin.
Depending upon your operating system (Windows Vista or XP edition), there is a different procedure
for stating your system for the first time, as outlined below.
55 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
Starting Windows Vista the first time
THE FIRST TIME YOU INITIALIZE YOUR WINDOWS VISTA SYSTEM, THE SCREEN WILL BE BLANK FOR
APPROXIMATELY TWO MINUTES. THIS IS NORMAL. AFTER INITIALIZATION, A “SET UP WINDOWS” DIALOG
BOX WILL APPEAR.
IMPORTANT: DURING THE SETUP PROCEDURE, DO NOT DISCONNECT THE POWER SUPPLY, PRESS ANY
BUTTONS, OR USE ANY PERIPHERAL DEVICES SUCH AS A MOUSE, KEYBOARD, OR REMOTE CONTROL.
In order to ensure that you receive the most benefits from the Windows Vista operating system, it
should be registered the first time you use it.
1
First of all, you will need to read and accept the End User License Agreements (EULAs).
•
IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE LICENSE
AGREEMENTS FOR INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN YOUR LIFEBOOK NOTEBOOK.
•
YOU CANNOT USE YOUR NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENTS. IF YOU STOP THE
PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME PROCESS, EVEN IF
YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
2
You will be prompted to enter your User Name and Password and you will be given a chance to select an icon
for your account.
3
4
The next screen asks for a Computer Name and allows you to choose a desktop background.
5
6
On the next screen set your time and date settings.
7
You will next see a "Help protect Windows automatically" screen in which the default choice is "Use
recommended settings”. The other two choices are "Install important updates only" and "Ask me later". Select
from the three choices.
You will next see the "Select your computer's current location" screen. Make your selection from Home, Work
(Default), and Public location.
The "Thank you" screen follows and an offer for free Norton Internet Security is extended. Following are several
screens while Windows checks the system performance.
56 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
8
Windows will then boot up for the first time. As noted above, the first time you initialize your Windows Vista
system, the screen will be blank for approximately two minutes. This is normal. During this period, do not
disconnect the power supply, press any buttons, or use any peripheral devices such as mouse, keyboard, or
remote control.
Registering Windows Vista with Microsoft
1
After Windows has booted up for the first time, the Control Panel Welcome Center will appear. If the Register
Windows Online icon is not seen in the window, click on “Show all xx items” (where “xx” is the number of topics
in the Welcome Center).
2
Click on Register Windows Online and follow the instructions that appear to register your copy of Windows.
Starting Windows XP the First Time
Registering Windows XP with Microsoft
In order to ensure that you receive the most benefits from the Windows operating system, it should be
registered the first time you use it.
After you receive the Windows Welcome screen, you will be prompted to enter registration
information in the following order.
First of all, you will need to read and accept the End User License Agreements (EULAs). After
accepting the EULAs, you will be asked if you want to enable the Automatic Updates feature.
Acceptance of this feature is recommended because it allows your system to be updated automatically
whenever an important change becomes available for your notebook.
•
IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENT YOU WILL BE ASKED TO REVIEW THE LICENSE
AGREEMENT FOR INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN YOUR LIFEBOOK NOTEBOOK.
•
YOU CANNOT USE YOUR LIFEBOOK NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENT. IF YOU
STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME
PROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
57 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
Several additional windows will appear, prompting you to enter a name and description for your
computer, an Administrator password, and a domain name. Read the instructions on the screens
carefully and fill in the information as directed.
You will then be automatically connected to the Internet, if you have an appropriate connection
available. If an automatic connection is not possible, you will be asked about how you dial out from
where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to
register at a later time, you may click the Skip button.
Once you are connected to the Internet, you will be asked if you wish to continue with the registration.
If you select Yes you will then enter your name and address, and email address if desired. Click Next
to complete registration.
Registering Your LifeBook notebook with Fujitsu
You can register your LifeBook by going to our website at: us.fujitsu.com/computers
You will need to be set up with an Internet Service Provider (ISP) to register online.
Installing Click Me!
ClickMe!
BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN SWITCH IS TURNED ON.
Windows Vista Systems
The first time you boot up your system, you will see a “Primary Settings for the PC” window. This
window explains the installations which will be performed by the Click Me! utility. If you click
[Execute], Click Me! will begin installing. If after clicking the button you receive a “User Account
58 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
Control” window, you will be asked for your permission to continue. Click [Continue] to continue. If
you cancel the operation, the Click Me! icon will appear on your desktop for later installation.
Windows XP Systems
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. We
highly recommend that you install the ClickMe! utility the first time you boot up. When you click
the Click Me! icon, your system will automatically create the related icons in the system tray in the
bottom right of the screen. These icons provide links to utilities that you will frequently access, such
as wireless LAN software provided by the wireless LAN manufacturer.
THERE MAY BE ADDITIONAL THIRD-PARTY APPLICATIONS THAT ARE NOT INSTALLED BY THE CLICKME!
UTILITY. FOR MORE INFORMATION, REFER TO YOUR GETTING STARTED GUIDE.
Fujitsu Driver Update Utility
Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can
choose to automatically or manually go to the Fujitsu site to check for new updates for your system.
For more information about the FDU utility, refer to “Automatically Downloading Driver Updates”
on page 83.
59 - Starting Your LifeBook Notebook
Downloaded from www.Manualslib.com manuals search engine
Power Management
Your Fujitsu LifeBook notebook has many options and features for conserving battery power. Some
of these features are automatic and need no user intervention, such as those for the internal modem.
However, others depend on the parameters you set to best suit your operating conditions, such as those
for the display brightness. Internal power management for your notebook may be controlled from
settings made in your operating system, pre-bundled power management application, or from settings
made in BIOS setup utility.
Besides the options available for conserving battery power, there are also some things that you can do
to prevent your battery from running down as quickly. For example, you can create an appropriate
power saving profile, put your notebook into Standby mode when it is not performing an operation,
and you can limit the use of high power devices. As with all mobile, battery powered computers, there
is a trade-off between performance and power savings.
Power/Suspend/Resume Button
When your notebook is active, the Power/Suspend/Resume button can be used to manually put the
notebook into Standby mode. Push the Power/Suspend/Resume button when the notebook is active,
but not actively accessing anything, and immediately release the button. You will hear two short beeps
and the system will enter Standby mode.
If your notebook is suspended, pushing the Power/Suspend/Resume button returns your notebook to
active operation. You can tell whether the system is Suspended by looking at the Power indicator. If
the indicator is visible and not flashing, your notebook is fully operational. If the indicator is visible
and flashing, your notebook is in Standby mode. If the indicator is not visible, the power is off or your
notebook is in Hibernation mode. (See Hibernation Feature)
Standby Mode
Standby mode in Windows saves the contents of your system memory during periods of inactivity by
maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other
internal components except those necessary to maintain system memory and for restarting.
60 - Power Management
Downloaded from www.Manualslib.com manuals search engine
Your notebook can be put in Standby mode by:
• Pressing the Power/Suspend/Resume button when your system is turned on.
• Selecting Standby from the Windows Shut Down menu.
• Timing out from lack of activity.
• Allowing the battery to reach the Dead Battery Warning condition.
Your notebook’s system memory typically stores the file on which you are working, open application
information, and any other data required to support operations in progress. When you resume
operation from Standby mode, your notebook will return to the point where it left off. You must use
the Power/Suspend/Resume button to resume operation, and there must be an adequate power source
available, or your notebook will not resume.
■
IF RUNNING YOUR NOTEBOOK ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE
WHILE YOUR NOTEBOOK IS IN STANDBY MODE, THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL.
■
DISABLING THE POWER/SUSPEND/RESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO
STANDBY OR HIBERNATION (SAVE-TO-DISK) MODE. THE BUTTON RESUME FUNCTION CAN’T BE DISABLED.
■
THE STANDBY OR HIBERNATION (SAVE-TO-DISK) MODE SHOULD NOT BE USED WITH CERTAIN PC CARDS. CHECK
YOUR PC CARD DOCUMENTATION FOR MORE INFORMATION. WHEN PC CARDS OR EXTERNAL DEVICES ARE IN
USE, HIBERNATION (SAVE-TO-DISK) MODE CANNOT RETURN TO THE EXACT STATE PRIOR TO SUSPENSION,
BECAUSE ALL OF THE PERIPHERAL DEVICES WILL BE RE-INITIALIZED WHEN THE SYSTEM RESTARTS.
■
IF YOUR NOTEBOOK IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE STANDBY OR HIBERNATION
(SAVE-TO-DISK) MODE, CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND MEMORY IS KEPT
ACTIVE DURING STANDBY MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING HIBERNATION MODE.
THE MAIN ADVANTAGE OF USING HIBERNATION (SAVE-TO-DISK) IS THAT POWER IS NOT REQUIRED TO MAINTAIN
YOUR DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR NOTEBOOK IN A SUSPENDED STATE
FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT LENGTHENS THE
POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES.
61 - Power Management
Downloaded from www.Manualslib.com manuals search engine
Hibernation (Save-to-Disk) Feature
The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a
part of the Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
Windows Vista:
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1
2
From the Start menu, select Control Panel.
Select “Choose what the power button does” or “Choose what closing the lid does”, then make your selections
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows XP:
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1
2
3
From the Start menu, select Settings, and then select Control Panel.
From the Control Panel select Power Options.
Select the Hibernate tab. Select the box to enable or disable this feature.
Windows Power Management
The Power Options icon located in the Windows Control Panel allows you to configure some of the
power management settings. For example, you can use the Power Options to set the timeout values for
turning off the display and hard disks whether you are running the notebook on battery power or one
of the adapters.
62 - Power Management
Downloaded from www.Manualslib.com manuals search engine
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows Vista:
1
2
Click the Start button, and then move the mouse over the right arrow.
Select the desired action from the list.
Windows XP:
1
2
3
Click the Start button, and then click Shut Down.
Select the Restart option from within the Windows Shut Down dialog box.
Click OK to restart your notebook. Your notebook will shut down and then reboot.
TURNING OFF YOUR LIFEBOOK NOTEBOOK WITHOUT EXITING WINDOWS OR TURNING ON YOUR
NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN
YOU START THE NEXT TIME.
Powering Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn
off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts
down without error, use the Windows shut down procedure.
BE SURE TO CLOSE ALL FILES, EXIT ALL APPLICATIONS, AND SHUT DOWN YOUR OPERATING SYSTEM
PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL
LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS.
63 - Power Management
Downloaded from www.Manualslib.com manuals search engine
Using the correct procedure to shut down from Windows allows your notebook to complete its
operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
1
2
3
Click the Start button, and then click Shut Down.
Select the Shut Down option from within the Windows Shut Down dialog box.
Click OK to shut down your notebook.
If you are going to store your notebook for a month or more see Care and Maintenance Section.
64 - Power Management
Downloaded from www.Manualslib.com manuals search engine
Chapter 3
User-Installable Features
Lithium ion Battery
Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook
when no external power source is available. The battery is durable and long lasting, but should not be
exposed to extreme temperatures, high voltages, chemicals or other hazards.
The Lithium ion battery operating time may become shorter if it is used under the following conditions:
• When used at temperatures that exceed a low of 5°C or a high of 35°C. Extreme temperatures not
only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the
Status Indicator panel will flash when you try to charge a battery that is outside its operating
temperature range. See “Battery Charging Indicators” on page 26.
• When using a high current device such as a modem, Multi-Format DVD Writer, CD-ROM drive,
DVD/CD-RW combo drive, or the hard drive, using the AC adapter will conserve your battery life.
DO NOT LEAVE A FAULTY BATTERY IN YOUR NOTEBOOK. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL
AUTO/AIRLINE ADAPTER, ANOTHER BATTERY OR YOUR NOTEBOOK ITSELF. IT MAY ALSO PREVENT
OPERATION OF YOUR NOTEBOOK BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY.
65
Downloaded from www.Manualslib.com manuals search engine
•
ACTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER
MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. CD-ROM DRIVE,
MULTI-FORMAT DVD WRITER, DVD/CD-RW DRIVE COMBO, OR HARD DRIVE USAGE MAY ALSO HAVE A
SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY
AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE.
•
UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING THEM IN
THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES PROPERLY. CHECK WITH
YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD
BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT YOUR SUPPORT REPRESENTATIVE
AT
1-800-8FUJITSU (1-800-838-5487)
Recharging the Batteries
If you want to know the condition of the primary Lithium ion battery, check the Battery Level indicator
located on the Status Indicator panel. The indicator changes as the battery level changes.
The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To
recharge the battery make sure the battery that needs to be charged is installed in your LifeBook
notebook and connect the AC or Auto/Airline adapter.
MAKE SURE THAT THE BATTERY CHARGING INDICATOR AND THE PERCENTAGE CHARGE IS SHOWN
INSIDE THE BATTERY LEVEL ICON ON THE STATUS INDICATOR PANEL.
There is no memory effect on the Lithium ion battery therefore you do not need to discharge the battery
completely before recharging. The charge times will be significantly longer if your notebook is in use
while the battery is charging. If you want to charge the battery more quickly, put your notebook into
Standby mode, or turn it off while the adapter is charging the battery. (See Power Management on page
60 for more information on Standby mode and shutdown procedure)
66 - Lithium ion Battery
Downloaded from www.Manualslib.com manuals search engine
USING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT DVD/CD-RW/CD-ROM
ACCESSES MAY PREVENT CHARGING COMPLETELY.
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond
to the low battery message, the batteries will continue to discharge until they are too low to operate.
When this happens, your notebook will go into Standby mode. There is no guarantee that your data
will be saved once the notebook reaches this point.
■
■
ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT
YOUR LIFEBOOK NOTEBOOK INTO STANDBY MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD
PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE.
WHEN YOU ARE IN STANDBY MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU
LIFEBOOK NOTEBOOK IS IN STANDBY MODE, ANY DATA THAT HAS NOT
BEEN SAVED TO THE HARD DRIVE WILL BE LOST.
REMOVE ALL POWER SOURCES WHILE YOUR
Dead Battery Suspend mode shows on the Status indicator just like the normal Standby mode. Once
your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you
provide a source of power either from an adapter, or a charged battery. Once you have provided power,
you will need to press the Power/Suspend/Resume button to resume operation.
In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source
is not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost
the data that was not stored. Once you provide power, you can continue to use your notebook while
an adapter is charging the battery.
67 - Lithium ion Battery
Downloaded from www.Manualslib.com manuals search engine
Shorted Batteries
The Status Indicator panel uses a symbol inside the battery outline of the Battery Level indicator to
display the operating level available in that battery. If this display shows a Shorted Battery, it means
the battery is damaged and must be replaced so it does not damage other parts of your LifeBook
notebook.
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that
is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1
2
3
Have a charged battery ready to install.
4
5
Insert a new battery into the bay, and press it down so that the latches click into place.
Shut down your notebook and disconnect the AC adapter.
While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the
latches to lift it.
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT
USE AN
1
AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
Plug an AC Adapter into the system and connect it to a power outlet.
68 - Lithium ion Battery
Downloaded from www.Manualslib.com manuals search engine
Battery Pack
Battery Bay Release Latches
Removing a Battery
2
Follow steps 3 through 6 in “Cold Swapping Batteries”.
IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR
NOTEBOOK OR CHARGE YOUR BATTERY.
69 - Lithium ion Battery
Downloaded from www.Manualslib.com manuals search engine
Media Tray Eject Button
Media Holder Tray
Emergency Tray Release
Optical Drive
Optical Drive
There is a variety of media available to use with your system, depending upon the system
configuration you have selected. Multi-Format DVD Writers, DVD/CD-RW Combo drives, and
DVD-ROM drives are collectively known as “optical drives”.
DVD-R and DVD-RW discs hold up to 4.7 GB of data (DVD-R discs used with Multi-Format DualLayer DVD writer hold up to 8.5 GB). A DVD-R disc can only be written to once; DVD-RW discs
can be written to over and over. DVD-R and DVD-RW discs can be played on most standard players.
CD-R and CD-RW discs hold up to 640 MB of data. A CD-R disc can only be written to once; CDRW discs can be written to over and over.
Depending upon your notebook configuration, you may have one of the following optical drives:
• DVD/CD-RW combo: A DVD/CD-RW combo drive allows you to access movie, software, data,
or audio DVD/CDs, and to write data onto recordable CD-R and CD-RW discs.
• Dual-Layer Multi-Format DVD Writer: This drive allows you to access movies, software, and
audio DVD/CDs as well as to read and write to CD-R, CD-RW, DVD-R, DVD+R, DVD-RW,
DVD+RW, and DVD RAM discs. The dual-layer architecture allows you to record up to 8.5 GB of
data on DVD+R discs.
• DVD-ROM: A DVD-ROM drive allows you to access software, data, or audio from CDs or DVDs.
70 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
INSTALL YOUR MEDIA PLAYER SOFTWARE BEFORE FIRST USING THE DVD, DVD/CD-RW, OR CD-ROM
MEDIA DRIVES. REFER TO THE APPLICABLE README FILE ON THE DRIVER APPLICATIONS CD-ROM.
Media Player Software
Dual-Layer Multi-Format DVD Writer model only: With the Dual-Layer Multi-Format DVD Writer
and media player software you can play DVD movies and music CDs on your LifeBook notebook.
The media player includes controls which allow you to take full advantage of the features of a DVD
movie, as well as standard features such as fast forward, fast reverse, pause, etc. With this drive you
can also burn onto recordable DVD-R/RW, DVD+R/RW, or CD-R/RW discs.
DVD/CD-RW Combo model only: With the combo drive, you can play DVD movies, read audio CDs,
and write data onto recordable CD-R or CD-RW discs.
DVD-ROM model only: With the DVD-ROM drive, you can read software, audio, or data from CD or
DVD discs.
•
DO NOT OPERATE YOUR OPTICAL DRIVE UNLESS YOUR LIFEBOOK NOTEBOOK IS SITTING ON A FLAT SURFACE.
USING A DRIVE WHEN THE SYSTEM IS NOT LEVEL MAY DAMAGE THE DRIVE OR PREVENT PROPER OPERATION.
•
PROLONGED USE OF THE OPTICAL DRIVE, SUCH AS WATCHING A DVD MOVIE, WILL SUBSTANTIALLY REDUCE
YOUR BATTERY LIFE IF NO EXTERNAL POWER SOURCE IS ATTACHED.
Loading Media on Your Drive
To load a disc into your optical drive:
1
Push and release the eject button on the front of the optical drive to open the holder tray. The tray will come out
of the LifeBook notebook a short distance.
2
Gently pull the tray out until a media disc can easily be placed in the tray.
71 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
•
YOU SHOULD PERIODICALLY CHECK THE FUJITSU WEBSITE AT US.FUJITSU.COM/COMPUTERS FOR THE MOST
CURRENT DRIVERS.
•
ALL LIFEBOOK DVD PLAYERS ARE SET TO PLAY DVD TITLES WITH REGION CODE NUMBER 1 WHICH IS
SPECIFIED FOR THE NORTH AMERICAN MARKET. THE REGION NUMBER IS A REGIONAL RESTRICTION CODE
DEFINED BY THE DVD FORUM ACTING ON HOLLYWOOD REQUIREMENTS. DIFFERENT REGION CODES ARE
RECORDED ON VIDEO DVD TITLES FOR PUBLICATION IN DIFFERENT AREAS OF THE WORLD. IF THE REGIONAL
CODE OF THE DVD PLAYER DOES NOT MATCH THE REGIONAL CODES ON THE TITLES, THEN PLAYBACK IS
IMPOSSIBLE.
•
YOU CAN CHANGE THE REGION CODE ON THE DVD PLAYER USING THE PROPERTIES MENU OF THE DVD
SOFTWARE. NOTE, HOWEVER, THAT YOU CAN ONLY CHANGE THE REGION CODE UP TO FOUR TIMES. AFTER THE
4TH CHANGE, THE LAST CODE ENTERED BECOMES PERMANENT, AND CANNOT BE CHANGED.
3
Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised
circle in the center of the tray.
4
Gently push the holder tray back in until you hear a click
IF YOU HAVE DISABLED THE AUTO INSERT NOTIFICATION FUNCTION, YOU WILL HAVE TO START THE
DRIVE EITHER BY USING MY COMPUTER OR FROM WITHIN WINDOWS EXPLORER, SINCE YOUR
NOTEBOOK WILL NOT AUTOMATICALLY RECOGNIZE THAT MEDIA HAS BEEN LOADED.
72 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
b.
a.
c.
d.
Loading/Ejecting Media
Removing Media
1
Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will
come out of the LifeBook notebook a short distance.
2
3
4
Gently pull the tray out until the disc can easily be removed from the tray.
Carefully remove the media disc from the holder tray.
Gently push the holder tray back in until you hear a click.
73 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
Emergency Optical Drive Tray Release
If for some reason the eject button fails, you can open the media tray with a paper clip or similar tool
inserted into the eject hole in the right side of the front of the tray. Straighten one side of a paper clip
and push it gently into the hole. The tray will pop out.
Emergency Release Hole
Emergency Tray Release
Using the Media Player Software
DEPENDING UPON ITS CONFIGURATION, YOUR SYSTEM MAY NOT HAVE THE MEDIA PLAYER SOFTWARE
PRE-INSTALLED. IF IT IS NOT INSTALLED, REFERENCE THE DOCUMENTATION THAT ACCOMPANIES THE
MEDIA APPLICATION.
74 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
Starting a DVD Movie (DVD Models only)
1 Insert the DVD into the optical drive of the notebook. If the CD AutoRun feature activates, skip Step 2.
2 The first time you insert a movie into the DVD/CD-RW tray, you will be prompted to select what you want the
system to do when discs are inserted (e.g., start automatically or wait for a prompt). Until you make a selection,
you will receive the same prompt whenever you insert a disc.
3
Click OK to close the About DVD Player Performance dialog box and the movie will begin.
Opening the Media Player Control Panel
With most DVD-ROMs, you have the option of altering how the movie should play and what you wish
to view. You can do this by using the media player control panel and the mouse.
1
2
Right-click on the movie screen to open a dropdown menu for options.
Select View, then Player for all the controls available. This will open the control panel into the bottom of the
screen.
Using the Media Player Control Panel
The media player software allows you to watch the movie much like a VCR player. You can pause,
rewind, fast-forward and stop the movie at any point.
1
2
To pause the movie, click the on-screen button.
3
To fast-forward the movie, click the button to forward to a specific portion of the movie, or the button to jump
to the ending credits.
4
To stop the movie, click the button.
To rewind the movie, click the button to rewind to a specific portion of the movie, or the button to return to
the opening screen.
Exiting the Media Player
1
2
Click the U located in the upper right corner of the title bar. This will open a media player dialog box.
Click Yes to stop and exit the movie, or No to close the media player dialog box and return to the movie.
75 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
Using Media Player on Battery Power
Since optical drives consume a lot of power, your overall battery life will be significantly shorter when
operating the optical drive continuously (such as watching a DVD movie) than during standard
operation. Many movie run-times are longer than your notebook can support on a single charged
battery. If you are watching a DVD movie on battery power you may need to swap in an additional,
charged battery or attach AC power during the movie to view it in its entirety.
•
PROLONGED USE OF THE OPTICAL DRIVE, SUCH AS WATCHING A DVD MOVIE, WILL GREATLY REDUCE YOUR
NOTEBOOK’S BATTERY LIFE.
•
MANY MOVIE RUN-TIMES ARE LONGER THAN YOUR SYSTEM CAN SUPPORT ON A SINGLE BATTERY. IF YOU ARE
DVD MOVIE ON BATTERY POWER YOU MAY NEED TO SWAP IN AN ADDITIONAL, CHARGED BATTERY
OR ATTACH AC POWER DURING THE MOVIE TO VIEW IT IN ITS ENTIRETY.
WATCHING A
•
AN ADDITIONAL FULLY-CHARGED BATTERY IS HIGHLY RECOMMENDED IF YOU WILL BE WATCHING DVD MOVIES
ON BATTERY POWER. IF YOU DON’T HAVE AN ADDITIONAL BATTERY, YOU MAY PURCHASE ONE EITHER ONLINE AT:
HTTP://WWW.COMPUTERS.US.FUJITSU.COM OR BY CALLING
1-877-372-3473.
To Watch a Movie on Battery Power:
1
2
3
Have an additional full-charged battery or your AC adapter ready for use.
Start watching your DVD movie.
When the low battery warning occurs, immediately stop the movie and exit the media player.
IF YOU DO NOT STOP THE MEDIA PLAYER QUICKLY AND THE LIFEBOOK NOTEBOOK ATTEMPTS TO AUTOSUSPEND (CRITICAL BATTERY LOW STATE) THE LIFEBOOK NOTEBOOK WILL SHUT DOWN IMPROPERLY.
IF THIS OCCURS, YOU MAY NEED TO PERFORM A HARD RESET AND FOLLOW THE INSTRUCTIONS, IF ANY,
PRESENTED TO YOU BEFORE THE SYSTEM WILL REBOOT.
4
Power down your notebook and replace the discharged battery with an additional fully-charged battery. If you
do not have an additional battery, you may attach AC power as soon as you see the low battery warning.
5
Resume your LifeBook notebook by pressing the Suspend button again. This is not required if you attached AC
power without entering standby mode.
76 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
6
7
Restart your media player, locate and skip to the chapter of the movie you were last watching.
Continue watching your DVD movie.
SOME SHORTER DVD MOVIES MAY NOT REQUIRE YOU TO SWAP BATTERIES OR ATTACH AC POWER TO
COMPLETE THEM. HOWEVER, IT IS BEST TO BE PREPARED SINCE ACTUAL BATTERY LIFE WHILE
OPERATING THE OPTICAL DRIVE CANNOT BE GUARANTEED.
77 - Optical Drive
Downloaded from www.Manualslib.com manuals search engine
SD Card
Memory Stick
Installing a Memory Stick or SD Card
Memory Stick/Secure Digital Cards
Your LifeBook notebook supports Memory Sticks and Secure Digital (SD) cards, on which you can
store and transfer data to and from a variety of digital devices. These cards use flash memory
architecture, which means they don’t need a power source to retain data.
Memory Stick is a flash memory technology that allows you to record, transfer and share digital
content, such as digital pictures, movies, music, voice, and computer data and applications.
Secure Digital (SD) Cards are very similar to Memory Sticks. Like Memory Sticks, SD Cards allow
portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and
PDAs. SD Cards transfer data quickly, with low battery consumption. Like the memory stick, it uses
flash memory architecture.
78 - Memory Stick/Secure Digital Cards
Downloaded from www.Manualslib.com manuals search engine
Installing Memory Stick/SD Cards
Memory Stick and SD Cards are installed in the Memory Stick/SD Card slot. To install an Memory
Stick or SD Card, follow these steps:
INSTALLING OR REMOVING A MEMORY STICK OR SD CARD DURING YOUR LIFEBOOK NOTEBOOK’S
SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
LIFEBOOK NOTEBOOK, OR BOTH.
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR
1
See your specific card manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
2
3
4
Make sure there is no card currently in the slot. If there is, see Removing a Memory Stick/SD Card.
Insert your card into the slot with the product label facing up.
Push the card firmly into the slot until it is seated in the connector.
Removing A Memory Stick/SD Card
To remove a Memory Stick or SD Card, follow these easy steps:
SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME
CARDS MAY REQUIRE YOUR LIFEBOOK NOTEBOOK TO BE IN STANDBY MODE OR OFF WHILE REMOVING
THEM.
Push the Memory Stick or SD Card in until it unlatches. It will then eject from the slot for removal.
79 - Memory Stick/Secure Digital Cards
Downloaded from www.Manualslib.com manuals search engine
ExpressCard Slot
(top slot only)
PC Card Slot
(bottom slot only)
Eject Buttons
Installing/Removing PC Card
PC Cards/ExpressCards™
Your LifeBook notebook supports Type I and Type II PC Cards and ExpressCardsTM, which can
perform a variety of functions depending on which type of card you install. You can install one or two
cards at a time, depending on its type. PC Cards should be installed in the bottom slot, and
ExpressCards in the top slot.
Some available PC/ExpressCards:
• Gigabit Ethernet Local area network (LAN) cards
• IEEE1394 cards
• S-ATA II cards
• IEEE802.11n WLAN cards
• Other PC Cards that conform to PCMCIA 2.1 or CardBus standards
For further information, refer to the instructions supplied with your card(s).
80 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
Installing PC Cards
PC Cards are installed in the PC Card slot (the lower of the two slots). To install a PC Card, follow
these steps:
•
INSTALLING OR REMOVING A PC CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR BOOTUP
PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
•
DO NOT INSERT A PC CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
YOU MAY BE REQUIRED TO LOG ON AS AN ADMINISTRATOR OR MEMBER OF THE ADMINISTRATOR’S
GROUP TO COMPLETE THIS PROCEDURE. IF THE COMPUTER IS CONNECTED TO A NETWORK, NETWORK
POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE.
1
See your PC Card manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
2
3
4
5
Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards.
If the eject button is extended, press it until it clicks.
Insert the card into the slot with the label facing up.
Push the card firmly into the slot until it is seated in the connector.
81 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
Removing PC Cards
See your PC Card manual for specific instructions on removing your card. Some cards may require
your notebook to be in Standby Mode or Off during removal.
•
WINDOWS HAS A SHUTDOWN PROCEDURE FOR PC CARDS THAT MUST BE FOLLOWED BEFORE REMOVING A
CARD. (REVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE.) IT IS GOOD PRACTICE TO
REMOVE DEVICES USING THE SAFELY REMOVE HARDWARE ICON IN THE SYSTEM TRAY.
•
IF THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED, YOU MUST SAVE ALL OF YOUR OPEN FILES,
CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK.
1
Unlock the card from the slot by pressing the eject button associated with the slot in which the card is located.
When pressed, the button will pop out.
2
Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot
allowing you to remove the card.
IF THE PC CARD HAS AN EXTERNAL CONNECTOR AND CABLE, DO NOT PULL THE CABLE WHEN
REMOVING THE CARD.
82 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
Installing ExpressCards
There are two different width ExpressCards: 34 mm and 54 mm. The connector inside the slot is
located on the left-hand side of the slot. If you insert a 34 mm card, be sure to align it with the left side
of the slot when inserting it.
ExpressCards are installed in the ExpressCard slot (the top slot).
54 mm ExpressCard
ExpressCard Slot
(top slot)
34 mm ExpressCard
Installing/Removing ExpressCards
•
INSTALLING OR REMOVING AN EXPRESSCARD DURING YOUR NOTEBOOK’S SHUTDOWN OR BOOTUP PROCESS
MAY DAMAGE THE CARD AND/OR YOUR NOTEBOOK.
•
DO NOT INSERT AN EXPRESSCARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD
AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR NOTEBOOK, OR BOTH.
YOU MAY BE REQUIRED TO LOG ON AS ADMINISTRATOR OR A MEMBER OF THE ADMINISTRATOR’S
GROUP TO COMPLETE THIS PROCEDURE. IF YOUR COMPUTER IS CONNECTED TO A NETWORK,
NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE.
83 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
See your ExpressCard manual for instructions on the installation of your card. Some cards may require
that your notebook is off while installing them.
To install an ExpressCard, follow these steps:
1
2
3
Make sure there is no ExpressCard currently in the slot. If there is, see Removing ExpressCards.
4
Push the card firmly into the slot until it is seated in the connector.
If the eject button is extended, press it in until it clicks.
Insert your ExpressCard into the slot with the product label facing up. If you are inserting a 34 mm card, be sure
to align it with the left side of the slot when inserting it.
Removing ExpressCards
See your ExpressCard manual for specific instructions on removing your card. Some cards may
require your notebook to be in Standby Mode or Off during removal.
•
WINDOWS HAS A SHUTDOWN PROCEDURE FOR EXPRESSCARDS THAT MUST BE FOLLOWED BEFORE REMOVING
A CARD. (REVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE.) IT IS GOOD PRACTICE
TO REMOVE DEVICES USING THE SAFELY REMOVE HARDWARE ICON IN THE SYSTEM TRAY.
•
IF THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED, YOU MUST SAVE ALL OF YOUR OPEN FILES,
CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK.
To remove an ExpressCard, follow these steps:
1
Unlock the card from the slot by pressing the eject button associated with the slot in which the card is located.
When pressed, the button will pop out.
2
Firmly press the button again until it is flush with the notebook. This will eject the card slightly out of the slot
allowing you to remove the card.
84 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
Smart Card Reader
A dedicated Smart Card Reader is provided on your notebook. Smart Cards are the same size and
shape as credit cards, but they contain an integrated microprocessor chip. The chip can hold a variety
of information, and provides you with many possible options, such as allowing you to make secure
purchases, pay for phone calls, store security information, and provide personal identification and
information.
In order to use the Smart Card Reader, you must purchase optional Smart Card third-party software.
Dedicated Smart Card slot
Smart Card Slot
85 - PC Cards/ExpressCards™
Downloaded from www.Manualslib.com manuals search engine
Memory Upgrade Module
Your Fujitsu LifeBook notebook comes with a minimum of 256 MB of high speed Double Data Rate
Synchronous Dynamic RAM (DDR2-667 SDRAM) factory installed. To increase your notebook’s
memory capacity, you may install an additional memory upgrade module. The memory upgrade must be
a dual-in-line (DIMM) SDRAM module. To ensure 100% compatibility, purchase the SDRAM module
only from the Fujitsu web store at www.shopfujitsu.com.
•
DO NOT REMOVE ANY SCREWS FROM THE MEMORY UPGRADE MODULE COMPARTMENT EXCEPT THE ONES
SPECIFICALLY SHOWN IN THE DIRECTIONS FOR INSTALLING AND REMOVING THE MEMORY UPGRADE MODULE.
•
THE MEMORY UPGRADE MODULE CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD). TO
MINIMIZE RISK TO THE MODULE, OBSERVE THE FOLLOWING PRECAUTIONS:
•
BEFORE HANDLING A MEMORY MODULE, TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC
ELECTRICITY BUILT UP IN YOUR BODY.
•
WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO TOUCH ANY
CONTACTS OR CHIPS. BE CAREFUL NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR COMPONENTS;
THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS.
•
BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING MEMORY MODULES. EVEN IF THE
SYSTEM IS IN HIBERNATE OR STANDBY STATES, DATA COULD BE LOST OR THE MEMORY COULD BE DAMAGED
IF POWER IS STILL AVAILABLE TO THE SYSTEM.
Installing Memory Upgrade Modules
1
2
3
4
5
6
Turn off power to your notebook, remove any power adapter (AC or auto/airline). Remove the battery.
Make sure that all the connector covers are closed.
Turn the notebook bottom side up, and remove the screw from the memory upgrade module compartment.
Remove the cover.
Remove the memory upgrade module from the static guarded sleeve.
Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade
module with the connector slot in the compartment. Note that the memory modules will be “stacked” when both
are installed.
86 - Memory Upgrade Module
Downloaded from www.Manualslib.com manuals search engine
Opening the Memory Upgrade Compartment
Installing a Second Memory Module
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
THE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK.
ONCE IT IS INSTALLED, YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
CAPACITY.
87 - Memory Upgrade Module
Downloaded from www.Manualslib.com manuals search engine
Removing a Memory Upgrade Module
1
2
3
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
Pull the clips sideways away from each side of the memory upgrade module at the same time.
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook.
Memory Clip
Removing a Memory Upgrade Module
4
5
Store the memory upgrade module in a static guarded sleeve.
Replace the cover and reinstall the screws.
88 - Memory Upgrade Module
Downloaded from www.Manualslib.com manuals search engine
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger
one, be sure to check that your notebook has recognized the change.
Windows XP: Check the memory capacity by clicking [Start] -> Settings -> Control Panel, then
double-clicking the System icon. Select the General tab and check the amount of memory under
“Computer:”
Windows Vista: Check the memory capacity by clicking [Start] -> Control Panel -> System and
Maintenance -> System. The amount f memory is displayed next to “Memory - RAM:”
There may be a variation between the actual memory size and what is displayed. This is possible if
your system is configured with an integrated Intel Graphics Media Accelerator X3100 which
dynamically allocates system memory to accelerate graphics performance.
IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS
PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT
CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 99.
89 - Memory Upgrade Module
Downloaded from www.Manualslib.com manuals search engine
Device Ports
Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports
to which you can connect external devices including: disk drives, keyboards, modems, printers, etc.
Modem (RJ-11) Telephone Jack
The modem (RJ-11) telephone jack is used for an internal modem. To connect the telephone cable
follow these easy steps:
1
2
3
Align the connector with the port opening.
Push the connector into the port until it is seated.
Plug the other end of the telephone cable into a telephone outlet.
Connecting a Modem
The modem sound may initially be deactivated. To activate modem sound follow these easy steps.
Windows XP:
1
2
3
4
Right click on the Speaker icon in your system tray.
Select Open Volume.
Select Option/Properties.
Under “Show the following volume controls”, click on Phone and click OK.
90 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
5
Uncheck the Mute box under Phone Balance.
Windows Vista:
1
2
3
Select [Start] -> Control Panel.
4
5
Select the Modems tab, and click the [Properties] button.
Select Classic View in the left pane.
Double-click Phone and Modems. You may initially need to enter your area code in order to open the Phone
and Modem Options window.
Select the Modem tab and adjust the volume as necessary.
THE INTERNAL MODEM IS NOT INTENDED FOR USE WITH DIGITAL PBX SYSTEMS. DO NOT CONNECT
THE INTERNAL MODEM TO A DIGITAL PBX AS IT MAY CAUSE SERIOUS DAMAGE TO THE INTERNAL
MODEM OR YOUR ENTIRE LIFEBOOK NOTEBOOK. CONSULT YOUR PBX MANUFACTURER’S
DOCUMENTATION FOR DETAILS. SOME HOTELS HAVE DIGITAL PBX SYSTEMS. BE SURE TO FIND OUT
BEFORE YOU CONNECT YOUR MODEM.
•
THE INTERNAL MODEM IS DESIGNED TO THE ITU-T V.90 STANDARD. ITS MAXIMUM SPEED OF 53000BPS IS THE
HIGHEST ALLOWED BY FCC, AND ITS ACTUAL CONNECTION RATE DEPENDS ON THE LINE CONDITIONS. THE
MAXIMUM SPEED IS 33600BPS AT UPLOAD.
•
THE INTERNAL MODEM ON ALL LIFEBOOK NOTEBOOKS FROM FUJITSU ARE CERTIFIED FOR USE IN THE UNITED
STATES AND CANADA. THE MODEM MAY BE CERTIFIED IN OTHER COUNTRIES.
Internal LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet
LAN connection. You may need to configure your notebook to work with your particular network.
(Please refer to your network administrator for information on your network configuration.) To
connect the LAN cable follow these easy steps:
1
2
3
Align the connector with the port opening.
Push the connector into the port until it is seated.
Plug the other end of the cable into a LAN outlet.
91 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Connecting the LAN
Parallel Port
The parallel port, or LPT port, located on the system and on the optional Port Replicator, allows you
to connect parallel devices, such as a printer to your notebook. In order to connect a parallel interface
device follow these easy steps:
1
2
3
Align the connector with the port opening.
Push the connector into the port until it is seated.
Tighten the two hold-down screws, located on each side of the connector.
Connecting a Parallel Device
92 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Serial Port
The serial port, or COM port, located on the system and on the optional Port Replicator allows you to
connect serial devices, such as printers or scanners. In order to connect a serial interface device follow
these easy steps:
1
2
3
Align the connector with the port opening.
Push the connector into the port until it is seated.
Tighten the two hold-down screws, located on each side of the connector.
Connecting a Serial Device
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator.
In order to connect your notebook to this device, follow the instructions that came with your port
replicator.
93 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Universal Serial Bus Ports
The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game
pads, pointing devices, keyboards and/or speakers. There are four USB 2.0 ports on your notebook:
two on the left side and two on the rear.
In order to connect a USB device follow these steps:
1
2
Align the connector with the port opening.
Push the connector into the port until it is seated.
DUE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES
AND/OR DRIVERS ARE GUARANTEED TO WORK.
System rear
Left side
Connecting a USB Device
94 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Infrared Port
The Infrared IrDA (4Mbps) port allows for wireless data transfer between your notebook and other
IrDA-compatible devices, such as another computer or a printer, without the use of a cable. The
infrared port is located on the front of the system, adjacent to the wireless LAN switch
It is important to keep in mind that while carrying out this form of communication, both devices must
be placed so their infrared ports are directly facing each other without obstruction. The devices must
also be separated by at least 6" but no more than 36" for maximum performance.
The following conditions may interfere with infrared communications:
• A television, radio remote control unit, or a wireless headphone is being used nearby.
• Direct sunlight, fluorescent light, or incandescent light shines directly on the port.
•
•
DO NOT MOVE EITHER DEVICE WHILE COMMUNICATION IS ACTIVE AS IT MAY INTERRUPT DATA TRANSMISSION.
BE CAREFUL NOT TO SCRATCH THE INFRARED PORT LENS. DIRT, SCRATCHES, OR OTHER SURFACE MARKS CAN
DEGRADE OPERATION.
IEEE 1394 Port
The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard.
The IEEE 1394 standard is easy to use, connect, and disconnect. This port can allow up to 400 Mbps
transfer rate. A third-party application may be required to operate your device with the 1394 port.
THE 1394 PORT USED IN THIS SYSTEM USES A FOUR-PIN CONFIGURATION. IF YOU INTEND TO
INTERFACE WITH DEVICES WHICH USE A SIX-PIN CONFIGURATION, YOU WILL NEED TO PURCHASE AN
ADAPTER.
95 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
In order to connect a 1394 device, follow these steps:
1
2
Align the connector with the port opening.
Push the connector into the port until it is seated.
Connecting an IEEE 1394 Device
Headphone Jack
The headphone jack allows you to connect headphones or powered external speakers to your
notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In
order to connect headphones or speakers follow these easy steps:
1
2
Align the connector with the port opening.
Push the connector into the port until it is seated.
•
DEPENDING UPON YOUR SYSTEM CONFIGURATION, THE HEADPHONE JACK MAY SERVE DIFFERENT PURPOSES.
ON SOME CONFIGURATIONS, THE JACK SERVES AS A STEREO HEADPHONE/OPTICAL DIGITAL AUDIO OUT JACK.
ON OTHER CONFIGURATIONS, THE JACK SERVES AS A STEREO HEADPHONE/LINE-OUT/OPTICAL DIGITAL AUDIO
OUT JACK.
•
IF YOU PLUG HEADPHONES INTO THE HEADPHONE JACK, BUILT-IN STEREO SPEAKERS WILL BE DISABLED.
96 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Microphone Jack
The microphone jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your
notebook. In order to connect a microphone follow these easy steps:
1
2
Align the connector with the port opening.
Push the connector into the port until it is seated.
DEPENDING UPON YOUR SYSTEM CONFIGURATION, THE MICROPHONE JACK MAY SERVE SINGLE OR
DUAL PURPOSES. ON CONFIGURATIONS, THE JACK SERVES AS A MONO MICROPHONE JACK. ON OTHER
CONFIGURATIONS, THE JACK SERVES AS A STEREO MICROPHONE/LINE-IN JACK.
External Video Port
The external video port allows you to connect an external monitor or LCD projector. In order to connect
an external video device, follow these easy steps:
1
2
3
Align the connector with the port opening.
Push the connector into the port until it is seated.
Tighten the two hold-down screws, located on
each end of the connector.
PRESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
YOUR DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT
CHOICE, STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL MONITOR
ONLY, FINALLY MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL MONITOR.
97 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Connecting an External Video Device
98 - Device Ports
Downloaded from www.Manualslib.com manuals search engine
Chapter 4
Troubleshooting Your LifeBook
Troubleshooting
There may be occasions when you encounter simple setup or operating problems that you can solve on
the spot, or problems with peripheral devices that can be solved by replacing the device. The
information in this section helps you isolate and resolve some of these straightforward issues and
identify failures that require service.
Identifying the Problem
If you encounter a problem, go through the following procedure before pursuing complex
troubleshooting:
1
2
3
Turn off your LifeBook notebook.
4
Make sure that any devices connected to the external connectors are plugged in properly. You can also
disconnect such devices, thus eliminating them as possible causes of failure.
5
6
Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it back on.
Make sure the AC adapter is plugged into your notebook and to an active AC power source.
Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the
slot, thus eliminating it as a possible cause of failure.
Go through the boot sequence.
99
Downloaded from www.Manualslib.com manuals search engine
7
If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed
troubleshooting information.
IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE
ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE.
8
If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support
representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487)
E-mail: 8fujitsu@us.fujitsu.com
Web site: http://www.computers.us.fujitsu.com/support.
Before you place the call, you should have the following information ready so that the customer support
representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Type of device connected, if any
See the Configuration Label on the bottom of your notebook for configuration and serial numbers.
100 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Specific Problems
Using the Troubleshooting Table
When you have problems with your LifeBook notebook, try to find the symptoms under the Problem
column of the troubleshooting table for the feature giving you difficulty. You will find a description
of common causes for that symptom under the column Possible Cause and what, if anything, you can
do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to
your notebook.
Troubleshooting Table
ProblemPage
ProblemPage
Audio Problems. . . . . . . . . . . . . . . . . page 102
Modem Problems
DVD/CD-ROM Drive Problems . . . . . page 102
Parallel, Serial, USB Device Problems.page 106
Port Replicator Problems . . . . . . . . . page 103
PC Card Problems . . . . . . . . . . . . . . . .page 106
Floppy Disk Drive Problems . . . . . . . page 104
Power Failures . . . . . . . . . . . . . . . . . . .page 107
Hard Drive Problems. . . . . . . . . . . . . page 104
Shutdown and Startup Problems . . . . .page 110
Keyboard or Mouse Problems. . . . . . page 104
Video Problems . . . . . . . . . . . . . page 111
Memory Problems. . . . . . . . . . . . . . . page 105
Miscellaneous Problems. . . . . . . page 113
101 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
page 105
Problem
Possible Cause
Possible Solutions
The volume is turned
too low.
Adjust the volume control on your notebook and operating system.
Use the [Fn+F9] key combination on your keyboard. Pressing [F9]
repeatedly while holding [Fn] will increase the volume of your
notebook.
The software volume
control is set too low.
Manually adjusting the volume (i.e. keyboard "hot keys") should
dynamically adjust the volume of the operating (see above). If that
doesn’t work, adjust the sound volume control settings in your
software or application.
Headphones are
plugged into your
notebook.
Plugging in headphones disables the built-in speakers, remove
the headphones.
BIOS audio settings are
incorrect.
Set the BIOS setup utility to the default values within the Multimedia Device Configuration menu. See “BIOS Setup Utility” on
page 54.
Software driver is not
configured correctly.
The Audio Driver may be installed or reinstalled by using the Drivers and Applications CD that came with your Fujitsu LifeBook.
Refer to your application and operating system documentation for
help.
The speakers have
been muted using the
Volume icon in the system tray.
Click on the Volume icon in the tool tray on the bottom right of the
screen. (It looks like a speaker). If the Mute box is checked, click
on it to uncheck it. You can also use the [Fn+F3] key combination
to toggle the volume on and off. Pressing [F3] while holding [Fn]
will toggle the audio mute.
Audio Problems
There is no sound coming
from the built-in speakers.
DVD/CD-RW/CD-ROM Drive Problems
LifeBook notebook fails to
recognize DVD/CDRW/CD-ROM’s.
The disc is not pushed
down onto raised center
circle of the drive.
Open optical drive tray and re-install the disc properly.
102 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
LifeBook notebook fails to
recognize DVD/CDRW/CD-ROM’s.
Optical drive tray is not
latched shut.
Push on the front of the optical drive tray until it latches. If that
doesn’t work, pull out the modular drive latch to remove the device
from the bay, then re-insert the drive until it latched; this ensures
that the drive is properly seated.
Incorrect DVD Player or
no DVD Player software is installed.
Install DVD Player software. (See “Media Player Software” on
page 71 for more information.)
Wrong drive designator
was used for the disc in
the application.
Verify the drive designator used by the application is the same as
the one used by the operating system. When the operating system
is booted from a DVD/CD, drive designations are automatically
adjusted. Note that the drive designation can be changed with the
Disk Management tool located at Administrative Tools -> Computer Management.
DVD/CD-RW/CD-ROM
is dirty or defective.
Wipe the disc with a non-abrasive CD cleaning cloth and reinsert.
It if still will not work try another DVD/CD-RW/CD-ROM in the
drive.
The Windows auto
insertion function is
active and is checking
to see if a disc is ready
to run.
This is normal. However, you may disable this feature.
(continued)
The drive access indicator
on the Status Indicator
Panel blinks at regular intervals with no disc in the tray
or the drive is not installed.
Port Replicator Problems
Note: Be sure to power down your LifeBook notebook before adding a printer to the Port Replicator parallel port.
Notebook does not turn on
when installed in the
optional Port Replicator
Port Replicator AC
adapter is not plugged
in.
Provide power to the Port Replicator.
Notebook is not properly seated in the Port
Replicator.
Remove and re-dock your LifeBook notebook.
103 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
Floppy Disk Drive Problems
You cannot access your
optional external floppy
disk.
You tried to write to a
write protected floppy
disk.
Eject the disk and set it to write enable.
Disk is not loaded correctly.
Eject floppy disk, check orientation and re-insert.
The floppy disk drive
may not be properly
installed.
Remove and re-install your floppy disk drive.
Security is set to protect
access to floppy disk
data.
Verify your password and security settings.
You cannot access your
hard drive.
The wrong drive designator was used by an
application when a
bootable disc was used
to start the notebook.
Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive
designations are automatically adjusted.
You cannot access your
hard drive.
(continued)
Security is set so your
operating system cannot be started without a
password.
Verify your password and security settings.
Hard Drive Problems
Keyboard or Mouse Problems
The built-in keyboard does
not seem to work.
The notebook has gone
into Standby mode.
Push the Power/Suspend/Resume button.
Your application has
locked out your keyboard.
Try to use your integrated pointing device to restart your system.
104 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
You have installed an external keyboard or mouse, and
it does not seem to work.
Your external device is
not properly installed.
Re-install your device. See “Device Ports” on page 90.
Your operating system
software is not set up
with correct software
driver for that device.
Check your device and operating system documentation and activate the proper driver.
Your operating system
software is not setup
with correct software
driver for that device.
Check your device and operating system documentation and activate the proper driver.
Your system has
crashed.
Try to restart your notebook. I
Your memory upgrade
module is not properly
installed.
Remove and re-install your memory upgrade module. See “Memory Upgrade Module” on page 86.
You have a memory
failure.
Check for Power On Self Test (POST) messages. See “Power On
Self Test Messages” on page 114.
Messages about
modem operation are
generated by whichever modem application is in use.
See your application software documentation for additional information.
You have connected an
external keyboard or a
mouse and it seems to be
locking up the system.
Memory Problems
Your Power On screen does
not show the correct
amount of installed
memory.
Modem Problems
Messages about modem
operation.
105 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
Parallel, Serial, and USB Device Problems
You have installed a parallel
port device, a serial port
device or a USB device.
Your LifeBook notebook
does not recognize the
device, or the device does
not seem to work properly.
The device is not properly installed.
Remove and re-install the device. See “Device Ports” on page 90.
The device may have
been installed while an
application was running,
so your notebook is not
aware of its installation.
Close the application and restart your notebook.
Your device may not
have the correct software driver active.
See your software documentation and activate the correct driver.
You may have the
wrong I/O address
selected for your device.
See your device and software documentation to determine the
required I/O address. Change the settings in the BIOS setup utility. See “BIOS Setup Utility” on page 54.
Your device and another
device are assigned the
same I/O address.
Check all I/O addresses located within the BIOS setup utility and
any other installed hardware or software to make sure there are
no duplications.
Parallel port is set to
output only.
Check parallel port setting in the BIOS and set to bi-directional or
ECP.
PC Card/ExpressCard Problems
A card inserted in the PC
Card or ExpressCard slot
does not work or is locking
up the system.
The card is not properly
installed.
Remove and re-install the card. See “PC Cards/ExpressCards™”
on page 80.
The card may have
been installed while an
application was running,
so your notebook is not
aware of its installation.
Close the application and restart your notebook.
106 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
A card inserted in the PC
Card or ExpressCard slot
does not work or is locking
up the system.
(continued)
Your software may not
have the correct software driver active.
See your software documentation and activate the correct driver.
You may have the
wrong I/O address
selected for your card
device.
See your PC Card/ExpressCard documentation to determine the
required I/O address. Change the settings in the BIOS. See “BIOS
Setup Utility” on page 54.
Your card device and
another device are
assigned the same I/O
address.
Check all I/O addresses located within the BIOS setup utility and
any other installed hardware or software to make sure there are
no duplications.
The installed primary
battery is completely
discharged, there is no
optional second battery
installed or there is no
Power adapter (AC or
Auto/Airline) installed.
Check the Status Indicator Panel to determine the presence and
condition of the batteries. See “Status Indicator Panel” on
page 24. Install a charged battery or a Power adapter.
The primary battery is
installed but is faulty.
Use the Status Indicator panel to verify the presence and condition of the batteries. See “Status Indicator Panel” on page 24. If a
battery is indicating a short, remove that battery and operate from
another power source or replace that battery.
The battery or batteries
are low.
Check the Status Indicator Panel to determine the presence and
condition of the batteries. See “Status Indicator Panel” on
page 24. Use a Power adapter to operate until a battery is
charged or install a charged battery.
The power adapter (AC
or auto/airline) is not
plugged in properly.
Verify that your adapter is connected correctly. See “Power
Sources” on page 48.
Power Failures
You turn on your LifeBook
notebook and nothing
seems to happen.
107 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
You turn on your LifeBook
notebook and nothing
seems to happen.
The Power adapter (AC
or auto/airline) has no
power from the AC outlet, airplane seat jack,
or the car’s cigarette
lighter.
Move the AC cord to a different outlet, check for a line switch or
tripped circuit breaker for the AC outlet. If you are using an
auto/airline adapter in a car make sure the ignition switch is in the
On or Accessories position.
The Power adapter (AC
or auto/airline) is faulty.
Try a different Power adapter or install a charged optional second
battery.
The power management parameters are
set for auto timeouts
which are too short for
your operating needs.
Press any button on the keyboard, or move the mouse to restore
operation. If that fails, push the Power/Suspend/Resume button.
Check your power management settings, or close your applications and go to the Power Options Properties located in the Control Panel to adjust the timeout values to better suit your needs.
You are operating on
battery power and
ignored a low battery
alarm until the batteries
are at the dead battery
state and the system
has gone into Dead Battery Suspend mode.
Install a power adapter and then push the Power/Suspend/Resume button. See “Power Sources” on page 48.
You have a battery failure.
Verify the condition of the batteries using the Status Indicator
panel, and replace or remove any batteries that are shorted. See
“Status Indicator Panel” on page 24.
Your power adapter has
failed or lost its power
source.
Make sure the adapter is plugged in and the outlet has power.
The installed batteries
are dead.
Replace the battery with a charged one or install a power adapter.
(continued)
Your LifeBook notebook
turns off all by itself.
Your LifeBook notebook will
not work on battery alone.
108 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
Your LifeBook notebook will
not work on battery alone.
(continued)
No batteries are
installed.
Install a charged battery.
The batteries are
improperly installed.
Verify that the batteries are properly connected by re-installing
them.
Your installed batteries
are faulty.
Verify the condition of the batteries using the Status Indicator
panel and replace or remove any batteries that are shorted. See
“Status Indicator Panel” on page 24.
You are running an
application that uses a
lot of power due to frequent hard drive access
or optical drive access,
or use of a modem,
LAN PC card, Wireless
LAN, or Bluetooth
device.
Use both the primary battery and an optional second battery
and/or use a power adapter for this application when at all
possible.
The power savings features may be disabled.
Check the Power Options menu settings and adjust according to
your operating needs.
The brightness is
turned all the way up.
Turn down the brightness adjustment. The higher the brightness
the more power your display uses.
The batteries are very
old.
Replace the batteries.
The batteries have been
exposed to high temperatures.
Replace the batteries.
The batteries are too
hot or too cold.
Restore the notebook to normal operating temperature. Charging
icon on the Status Indicator panel will flash when battery is outside of operating range.
The batteries seem to
discharge too quickly.
109 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
Shutdown and Startup Problems
The Suspend/Resume button does not work.
Suspend/Resume
button is disabled.
In Windows XP, enable the button by going to the Control Panel ->
Power Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the option that best suits your needs.
In Windows Vista, select the Change what the power button does”
option.
There may be application software. conflict
Close all applications and try the button again.
The boot sequence settings of the setup utility
are not compatible with
your configuration.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the setup
utility and adjust the source settings from the Boot menu. See
“BIOS Setup Utility” on page 54.
You have a secured
system requiring a
password to load your
operating system.
Make sure you have the right password. Enter the setup utility and
verify the Security settings and modify them as accordingly. See
“BIOS Setup Utility” on page 54.
Internal hard drive was
not detected.
Use the BIOS setup utility or Primary Master submenu, located
within the Main menu, to try to auto detect the internal hard drive.
An error message is displayed on the screen during
the notebook (boot)
sequence.
Power On Self Test
(POST) has detected a
problem.
See the Power On Self Test (POST) messages to determine the
meaning and severity of the problem. Not all messages are errors;
some are simply status indicators. See “Power On Self Test Messages” on page 114.
Your notebook appears to
change setup parameters
when you start it.
BIOS setup changes
were not saved when
made and you exited
the setup utility.
Make sure you select Save Changes And Exit when exiting the
BIOS setup utility.
The BIOS CMOS holdup battery has failed.
Contact your support representative for repairs. This is not a user
serviceable part but has a normal life of 3 to 5 years.
The system powers up, and
displays power on information, but fails to load the
operating system.
110 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
Your system display won’t
turn on when the system is
turned on or has resumed.
You have installed the
LifeBook/Security Application panel.
Check the Status Indicator Panel for presence of the Security icon.
If it is visible, enter your password See “Status Indicator Panel” on
page 24.
The notebook is set for
an external monitor
only.
Pressing [F10] while holding down the [Fn] key allows you to
change your selection of where to send your display video. Each
time you press the keys you will step to the next choice. The
choices, in order are: built-in display only, external monitor only,
both built-in display and external monitor.
The display angle and
brightness settings are
not adequate for your
lighting conditions.
Move the display and the brightness control until you have adequate visibility. Pressing either the [F6] or [F7] keys while holding
down the [Fn] key also allows you to change the brightness level
of the display.
The power management timeouts may be
set for very short intervals and you failed to
notice the display come
on and go off again.
Press a keyboard button or move the mouse to restore operation.
If that fails, push the Power/Suspend/Resume button. (The display
may be shut off by Standby mode, Auto Suspend or Video Timeout)
The notebook turned on
with a series of beeps and
the built-in display is blank.
Power On Self Test
(POST) has detected a
failure which does not
allow the display to
operate.
Contact your support representative.
The display goes blank by
itself after you have been
using it.
The notebook has gone
into Video timeout,
Standby mode, or Saveto-Disk mode because
you have not used it for
a period of time.
Press any button on the keyboard, or move the mouse to restore
operation. If that fails, push the Power/Suspend/Resume button.
Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to
adjust the timeout values to better suit your operation needs. See
“BIOS Setup Utility” on page 54.
Video Problems
The built-in display is blank
when you turn on your LifeBook notebook.
111 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
The display goes blank by
itself after you have been
using it.
The power management timeouts may be
set for very short intervals and you failed to
notice the display come
on and go off again.
Press any button on the keyboard, or move the mouse to restore
operation. If that fails, push the Power/Suspend/Resume button.
(The display may be shut off by Standby Mode, Auto Suspend or
Video Timeout)
Your display won’t turn on
when the system is turned
on or when it has resumed.
The system may be
password-protected.
Check the status indicator panel to verify that the Security icon is
blinking. If it is blinking, enter your password.
The Built-in Display does
not close.
A foreign object, such
as a paper clip, is stuck
between the display and
keyboard.
Remove all foreign objects from the keyboard.
The Built-in Display has
bright or dark spots.
If the spots are very tiny
and few in number, this
is normal for a large
LCD display.
This is normal; do nothing.
If the spots are numerous or large enough to
interfere with your operation needs.
Display is faulty; contact your support representative.
You are running an
application that does
not support 800 x
600/1024 x 768 pixel
resolution display and
display compression is
enabled.
Display compression gives a clearer but smaller display for applications that do not support 800 x 600/1024 x 768 pixel resolution.
You can fill the screen but have less resolution by changing display compression settings, (See Video Features submenu located
within the Advanced menu of the BIOS. See “BIOS Setup Utility”
on page 54.
(continued)
The application display
uses only a portion of your
screen and is surrounded
by a dark frame.
112 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Problem
Possible Cause
Possible Solutions
The Display is dark when
on battery power.
The Power Management utility default is set
on low brightness to
conserve power.
Press [Fn] + [F7] to increase brightness or double-click on the battery gauge and adjust Power Control under battery settings.
You have connected an
external monitor and it does
not display any information.
Your BIOS setup is not
set to enable your external monitor.
Toggle the video destination by pressing [Fn]+ [F10] together, or
check your BIOS setup and enable your external monitor. (See the
Video Features submenu, located within the Advanced Menu of
the BIOS. See “BIOS Setup Utility” on page 54.
Your external monitor is
not properly installed.
Reinstall your device. See “External Video Port” on page 97.
Your operating system
is not setup with the
correct software driver
for that device.
Check your device and operating system documentation and activate the proper driver.
Your external monitor is
not compatible with your
LifeBook notebook.
See your monitor documentation and the External Monitor Support portions of the Specifications section. See “Specifications” on
page 133.
Application software
often has its own set of
error message displays.
See your application manual and help displays screens for more
information. Not all messages are errors some may simply be status.
You have connected an
external monitor and it does
not come on.
Miscellaneous Problems
Error message is displayed
on the screen during the
operation of an application.
113 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Power On Self Test Messages
The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your
operating system can generate and an explanation of each message. Error messages are marked with
an *. If an error message is displayed that is not in this list, write it down and check your operating
system documentation both on screen and in the manual. If you can find no reference to the message
and its meaning is not clear, contact your support representative for assistance.
nnnn Cache SRAM Passed
Where nnnn is the amount of system cache in kilobytes success-fully tested by the Power On Self Test.
(This can only appear if you have an SRAM PC Card installed.)
*Diskette drive A error or Diskette drive B error
Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the
drive is defined with the proper diskette type in the Setup Utility, See “BIOS Setup Utility” on page 54.
and that the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid
using it and contact your support representative.
*Extended RAM Failed at offset: nnnn
Extended memory not working or not configured properly. If you have an installed memory upgrade
module, verify that the module is properly installed. If it is properly installed, you may want to check
your Windows Setup to be sure it is not using unavailable memory until you can contact your support
representative.
nnnn Extended RAM Passed
Where nnnn is the amount of memory in kilobytes successfully tested.
*Failing Bits: nnnn The hex number nnnn
This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which
failed the memory test. Each 1 (one) in the map indicates a failed bit. This is a serious fault that may
cause you to lose data if you continue. Contact your support representative.
114 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
*Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4)
The fixed disk is not working or not configured properly. This may mean that the hard drive type
identified in your setup utility does not agree with the type detected by the Power On Self Test. Run
the setup utility to check for the hard drive type settings and correct them if necessary. If the settings
are OK and the message appears when you restart the system, there may be a serious fault which might
cause you to lose data if you continue. Contact your support representative.
*Incorrect Drive A type – run SETUP
Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type
identified in your setup utility does not agree with the type detected by the Power On Self Test. Run
the setup utility to correct the inconsistency.
*Incorrect Drive B type – run SETUP
Type of floppy drive B: not correctly identified in Setup. This means that the floppy disk drive type
identified in your setup utility does not agree with the type detected by the Power On Self Test. Run
the setup utility to correct the inconsistency.
*Invalid NVRAM media type
Problem with NVRAM access. In the unlikely case that you see this message you may have some
display problems. You can continue operating but should contact your support representative for more
information.
*Keyboard controller error
The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but
may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error
Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able
to use an external keyboard until then. Contact your support representative.
115 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
*Keyboard error nn
BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace
your keyboard but may be able to use an external keyboard until then. Contact your support
representative.
*Monitor type does not match CMOS – Run SETUP
Monitor type not correctly identified in Setup. This error probably means your BIOS is corrupted, run
the setup utility and set all settings to the default conditions. If you still get this error, contact your
support representative.
*Operating system not found
Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both
the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless
you have changed your installation greatly, the operating system should be on drive C:. If the setup
utility is correctly set, your hard drive may be corrupted.
*Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen.
If it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact
your support representative.
*Parity Check 2 nnnn
Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If
it cannot locate the address, it displays ????. This is a
potentially data-destroying failure. Contact your
support representative.
116 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
*Press <F1> to resume, <F2> to SETUP
Displayed after any recoverable error message. Press
the [F1] key to continue the boot process or the [F2]
key to enter Setup and change any settings.
*Previous boot incomplete – Default configuration used
Previous Power On Self Test did not complete successfully. The Power On Self Test will load default
values and offer to run Setup. If the previous failure was caused by incorrect values and they are not
corrected, the next boot will likely fail also. If using the default settings does not allow you to complete
a successful boot sequence, you should turn off the power and contact your support representative.
*Real time clock error
Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Shadow RAM Failed at offset: nnnn
Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data
corruption if you continue. Contact your support representative.
nnnn Shadow RAM Passed
Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
*System battery is dead – Replace and run SETUP
The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board
mounted battery which requires a support representative to change. You can continue operating but
you will have to use setup utility default values or reconfigure your setup utility every time you turn
off your notebook. This battery has an expected life of 2 to 3 years.
System BIOS shadowed
System BIOS copied to shadow RAM.
117 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
*System CMOS checksum bad – run SETUP
BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program
that changes data stored in BIOS memory. Run Setup and reconfigure the system.
*System RAM Failed at offset: nnnn
System memory failed at offset nnnn of in the 64k block at which the error was detected. This means
that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data.
Contact your support representative for repairs.
nnnn System RAM Passed
Where nnnn is the amount of system memory in
kilobytes successfully tested.
*System timer error
The timer test failed. The main clock that operates the computer is faulty. Requires repair of system
board. Contact your support representative for repairs.
UMB upper limit segment address: nnnn
Displays the address of the upper limit of Upper Memory Blocks, indicating released segments of the
BIOS memory which may be reclaimed by a virtual memory manager.
Video BIOS shadowed
Video BIOS successfully copied to shadow RAM.
118 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Emergency Media Player Drive Tray Release
If for some reason the eject button fails, you can open the DVD/CD-ROM tray with a paper clip or
similar tool inserted into the eject hole in the far right side of the front of the tray. Straighten one side
of a paper clip and push it gently into the hole. The tray will pop out a short distance.
Modem Result Codes
The operating system and application software that is factory installed detects the modem
characteristics and provides the necessary command strings to operate the modem. The internal
modem operation is controlled by generic AT commands from the operating system and application
software. The standard long form result codes may, in some cases, be displayed on your screen to keep
you informed of the actions of your modem. The operating system and application software may
suppress display of the result codes.
Examples of result codes are:
• OK
• NO CARRIER
• NO DIALTONE
• CONNECT 53000 (Connection complete
at 53,000 bps.)
• ERROR
• FAX
• RING (This means an incoming call.)
• BUSY
• NO ANSWER
When using the internal modem with applications that are not factory installed refer to the application
documentation.
119 - Troubleshooting Your LifeBook
Downloaded from www.Manualslib.com manuals search engine
Restoring Your Pre-installed Software
The Drivers and Applications Restore (DAR) DVD contains sets of device drivers and Fujitsu utilities
(in specific directories) that are unique to your computer configuration for use as documented below.
IN ORDER TO INSTALL APPLICATIONS AND/OR DRIVERS FROM THE DAR DVD, YOU WILL NEED TO USE A
DVD DRIVE EITHER IN YOUR SYSTEM OR ATTACHED EXTERNALLY.
IF YOU HAVE ACCESS TO THE INTERNET, VISIT THE FUJITSU SUPPORT WEBSITE AT
HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO CHECK FOR THE MOST CURRENT
INFORMATION, DRIVERS AND HINTS ON HOW TO PERFORM RECOVERY AND SYSTEM UPDATES.
Re-installing Individual Drivers and Applications
The Drivers and Applications CD can be used to selectively re-install drivers and/or applications that
may have been un-installed or corrupted.
THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT
ARE NOT ON THE DAR CD. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED FROM
THE THIRD-PARTY’S WEBSITE.
To re-install drivers and/or applications:
1
Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed
after the CD is inserted.
2
3
After reading the License Agreement, click [I agree].
A window will appear containing a list of applications, drivers, and utilities that you can install from the Drivers
and Applications CD.
120 - Restoring Your Pre-installed Software
Downloaded from www.Manualslib.com manuals search engine
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES
THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE
INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS
CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE
COMPONENT IS ALREADY INSTALLED.
4
In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green
components separately.
5
Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
6
After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
Restoring the Factory Image
The Restore Disc that came with your system contains two utilities:
• The Recovery utility allows you to restore the original contents of the C: drive.
• The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and
prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely
certain that you want to erase your entire hard disk, including all partitions.
•
THE USE OF THIS DISC REQUIRES THAT YOU HAVE A DEVICE CAPABLE OF READING DVDS ATTACHED TO YOUR
SYSTEM. IF YOU DO NOT HAVE A BUILT-IN DVD PLAYER, YOU WILL NEED TO ATTACH AN EXTERNAL PLAYER. FOR
MORE INFORMATION ON AVAILABLE EXTERNAL DEVICES, VISIT OUR WEB SITE AT: US.FUJITSU.COM/COMPUTERS.
•
THIS DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED.
BOOT Priority Change
Before restoring an image, you must first verify that your system is set up to boot from the DVD drive.
To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy
disk drive), perform one of the following procedures:
121 - Restoring Your Pre-installed Software
Downloaded from www.Manualslib.com manuals search engine
Changing priority from BIOS Setup utility:
1
Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility.
or,
Press the [Enter] key or the left mouse button when the Fujitsu logo appears. The TrustedCore Menu will
appear. Select BIOS Setup from the TrustedCore Menu.
2
3
4
Using the arrow keys, go to the Boot menu.
5
6
Arrow down to the Boot Device Priority submenu. Press [Enter].
If “Optical Media Drive” or “CD-ROM Drive” is not at the top of the list, arrow down to the drive in the list, and
press the space bar (or the + key) to move it to the top of the list. (The system attempts to boot from the devices
in the order in which they are listed.). Note that the BIOS for some systems will indicate “CD-ROM Drive”, even
when a DVD drive is connected.
If you have an external DVD drive connected, proceed to the next step; otherwise, proceed to step 7.
If you have an external DVD drive connected:
•
•
•
•
7
Select the Advanced menu in the BIOS window.
Scroll down to the USB Features submenu and press the Enter key to open it.
If Legacy USB Support is disabled, press the space bar to enable it.
Scroll down to SCSI SubClass Support and press the space bar to enable it.
Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process.
Changing priority from BOOT Menu:
1
2
3
Start your system and press the [F12] key when the Fujitsu logo appears. You will open the Boot Menu window.
Using the arrow keys, select the device from which you want to boot.
Press [Enter]. Note that this is a one-time boot priority. To change the boot priority for a longer period, perform
the steps above in “Changing priority from BIOS Setup utility”.
After you have changed the boot priority, you can restore a backup image when you are booting up.
122 - Restoring Your Pre-installed Software
Downloaded from www.Manualslib.com manuals search engine
Procedure
1
2
3
4
5
Turn on the power to your system.
Ensure that you have a device that can read DVDs either installed in your system or attached externally to it.
Insert the Restore Disc into the drive tray.
Reboot your system.
After the system reboots, follow the instructions that appear to either restore your system image or erase all
data from your hard disk.
Automatically Downloading Driver Updates
Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can
choose to automatically or manually go to the Fujitsu site to check for new updates for your system.
The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over
the icons to find the correct one). If the icon does not appear in the system tray, go to [Start] -> All
Programs, and click on Fujitsu Driver Update; this will create the icon automatically.
To invoke the FDU menu, you can either right-click on the FDU icon or hold the pen on the icon for
a couple of seconds until the menu appears. The menu contains the following items:
Check for updates now
Allows for manual driver update search. The first time it is used, you are prompted to agree to a user
agreement. After clicking on the icon, the FDU automatically connects with the Fujitsu site to check
for updates and downloads them. While downloading, the icon has a red bar through it, indicating that
it cannot be used while the download is in process. When the update is complete, a message appears
informing you of the fact.
Enable Automatic Update Notifications
Automatically searches for new updates on a regular basis (approximately every 3 days).
123 - Restoring Your Pre-installed Software
Downloaded from www.Manualslib.com manuals search engine
Show update history
Brings up a screen that displays a history of updates that have been made via the FDU.
About Fujitsu Driver Update
Displays the FDU version number and copyright information
Fujitsu Driver Update Readme
Displays the FDU readme.
124 - Restoring Your Pre-installed Software
Downloaded from www.Manualslib.com manuals search engine
Chapter 5
Care and Maintenance
Caring for your LifeBook Notebook
If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This
section provides some tips for looking after the notebook and its devices.
•
THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE (ESD).
TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS:
•
BEFORE DOCKING OR UNDOCKING YOUR LIFEBOOK NOTEBOOK (WHEN USING A PORT REPLICATOR), IT IS
A GOOD PRACTICE TO ALWAYS TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY
BUILT UP IN YOUR BODY.
•
BE SURE TO POWER DOWN YOUR SYSTEM BEFORE ADDING OR REMOVING SYSTEM COMPONENTS. EVEN
IF THE SYSTEM IS IN HIBERNATE OR STANDBY STATES, DATA COULD BE LOST OR MEMORY COULD BE
DAMAGED IF POWER IS STILL AVAILABLE TO THE SYSTEM.
•
WHEN INSTALLING OR REMOVING A MEMORY MODULE, HOLD IT BY THE EDGE SO AS NOT TO TOUCH ANY
BE CAREFUL NOT TO TOUCH ANY INTERNAL COMPUTER TERMINALS OR
COMPONENTS; THE OIL FROM YOUR FINGERS COULD CAUSE A SHORT TO THE COMPONENTS.
CONTACTS OR CHIPS.
•
ELECTRICAL EQUIPMENT MAY BE HAZARDOUS IF MISUSED. OPERATIONS OF THIS PRODUCT OR SIMILAR
PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE INTERIOR OF
ANY ELECTRICAL PRODUCTS AND DO NOT PERMIT THEM TO HANDLE ANY CABLES.
125
Downloaded from www.Manualslib.com manuals search engine
• Your LifeBook notebook is a durable but sensitive electronic device. Treat it with respect and care.
• Make a habit of transporting it in a suitable carrying case.
• Do not attempt to service the computer yourself. Always follow installation instructions closely.
• Keep it away from food and beverages.
• To protect your notebook from damage and to optimize system performance, be sure to keep all air
all vents unobstructed, clean, and clear of debris. This may require periodic cleaning, depending
upon the environment in which the system is used.
• Do not operate the notebook in areas where the air vents can be obstructed, such as in tight
enclosures or on soft surfaces like a bed or cushion.
• If you accidentally spill liquid on your LifeBook notebook:
1
2
3
4
Turn it off.
Position it so that the liquid can run out.
Let it dry out for 24 hours, or longer if needed.
If your notebook will not boot after it has dried out, call your support representative.
• Do not use your Fujitsu LifeBook notebook in a wet environment (near a bathtub, swimming pool).
• Always use the AC adapter and batteries that are approved for your notebook.
• Avoid exposure to sand, dust and other environmental hazards.
• Do not expose your notebook to direct sunlight for long periods of time as temperatures above 140°
F (60° C) may damage your notebook.
• Keep the covers closed on the connectors and slots when they are not in use.
• Do not put heavy or sharp objects on the computer.
• If you are carrying your LifeBook notebook in a briefcase, or any other carrying case, make sure
that there are no objects in the case pressing on the lid.
• Never position your notebook such that the optical drive is supporting the weight of the notebook.
126 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
Cleaning your LifeBook notebook
• Always disconnect the power plug. (Pull the plug, not the cord.)
• Clean your LifeBook notebook with
/ a damp, lint-free cloth. Do not use abrasives or solvents.
• Use a soft cloth to remove dust from the screen. Never use glass cleaners.
Storing your LifeBook notebook
• If storing your notebook for a month or longer, turn your LifeBook notebook off, fully charge the
battery(s), then remove and store all Lithium ion batteries.
• Store your notebook and batteries separately. If you store your LifeBook with a battery installed,
the battery will discharge, and battery life will be reduced. In addition, a faulty battery might
damage your LifeBook.
• Store your Fujitsu LifeBook in a cool, dry location. Temperatures should remain between 13ºF
(-25ºC) and 140ºF (60ºC).
Traveling with your LifeBook notebook
• Do not transport your notebook while it is turned on.
• It is recommended that you carry your notebook with you while traveling, rather than checking it
in as baggage.
• Always bring your System Recovery CD that came with your notebook when you travel. If you
experience system software problems while traveling, you may need it to correct any problems.
• Never put your notebook through a metal detector. Have your notebook hand-inspected by security
personnel. You can however, put your notebook through a properly tuned X-ray machine. To avoid
problems, place your notebook close to the entrance of the machine and remove it as soon as
possible or have your notebook hand-inspected by security personnel. Security officials may
require you to turn your notebook On. Make sure you have a charged battery on hand.
127 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
• When traveling with the hard drive removed, wrap the drive in a non-conducting materials (cloth
or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put
your hard drive through a metal detector. Have your hard drive hand-inspected by security
personnel. You can however, put your hard drive through a properly tuned X-ray machine.
• Take the necessary plug adapters if you're traveling overseas. Check the following diagram to
determine which plug adapter you'll need or ask your travel agent.
Outlet Type
Location
United States, Canada, parts of Latin America, Mexico,
Japan, Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent States
(CIS), most of Europe, parts of Latin America, the Middle
East, parts of Africa, Hong Kong, India, most of South Asia
United Kingdom, Ireland, Malaysia, Singapore, parts of Africa
China, Australia, New Zealand
128 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
Batteries
Caring for your Batteries
• Always handle batteries carefully.
• Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object).
Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal
objects. Doing so may cause an explosion or fire.
• Do not drop, puncture, disassemble, mutilate or incinerate the battery.
• Recharge batteries only as described in this manual and only in ventilated areas.
• Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten the life
of your battery.
• Do not leave a battery in storage for longer than 6 months without recharging it.
Increasing Battery Life
• Power your LifeBook notebook through the AC or optional auto/airline adapter whenever possible.
• If your notebook is running on battery power all day, connect it to the AC adapter overnight to
recharge the battery.
• Keep brightness to the lowest level comfortable.
• Set the power management for maximum battery life.
• Put your notebook in Standby mode when it is turned on and you are not actually using it.
• Limit your media drive access.
• Disable the Media Player auto insert notification function.
• Always use fully charged batteries.
• Eject PCMCIA cards and ExpressCards when not in use.
129 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
Floppy Disks and Drives
Caring for your Floppy Disks
• Avoid using the floppy disks in damp and dusty locations.
• Never store a floppy disk near a magnet or magnetic field.
• Do not use a pencil or an eraser on a disk or disk label.
• Avoid storing the floppy disks in extremely hot or cold locations, or in locations subject to severe
temperature changes. Store at temperatures between 50º F (10ºC) and 125ºF (52ºC).
• Do not touch the exposed part of the disk behind the metal shutter.
• Never use the floppy disk drive with any liquid, metal, or other foreign matter inside the floppy disk
drive or disk.
• Never disassemble your floppy disk drive.
Media Care
Caring for your Media (DVD/CD/CD-R)
Media discs are precision devices and will function reliably if given reasonable care.
• Always store your media disc in its case when it is not in use.
• Always handle discs by the edges and avoid touching the surface.
• Avoid storing any media discs in extreme temperatures.
• Do not bend media discs or set heavy objects on them.
• Do not spill liquids on media discs.
• Do not scratch media discs.
• Do not get dust on media discs.
130 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
• Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen.
• If a media disc is subjected to a sudden change in temperature, cold to warm condensation may form
on the surface. Wipe the moisture off with a clean, soft, lint free cloth and let it dry at room
temperature. DO NOT use a hair dryer or heater to dry media discs.
• If a disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting
from the inner edge and wiping to the outer edge.
Caring for your Optical Drive
Your optical drive is durable but you must treat it with care. Please pay attention to the following
points:
• The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock
or vibration with the power on.
• Avoid using or storing the drive where it will be exposed to extreme temperatures.
• Avoid using or storing the drive where it is damp or dusty.
• Avoid using or storing the drive near magnets or devices that generate strong magnetic fields.
• Avoid using or storing the drive where it will be subjected to shock or vibration.
• Do not disassemble or dismantle the optical drive.
• Use of a commercially available lens cleaner is recommended for regular maintenance of your
drive.
131 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
PC Cards/ExpressCards
Caring for your Cards
PC Cards and ExpressCards are durable, but you must treat them with care. The documentation
supplied with your card will provide specific information, but you should pay attention to the
following points:
• To keep out dust and dirt, store cards in their protective sleeves when they are not installed in your
LifeBook notebook.
• Avoid prolonged exposure to direct sunlight or excessive heat.
• Keep the cards dry.
• Do not flex or bend the cards, and do not place heavy objects on top of them.
• Do not force cards into the slot.
• Avoid dropping cards, or subjecting them to excessive vibration.
132 - Care and Maintenance
Downloaded from www.Manualslib.com manuals search engine
Chapter 6
System Specifications
Specifications
This section provides the hardware and environmental specifications for your Fujitsu LifeBook
notebook. Specifications of particular configurations will vary.
Configuration Label
The configuration label located on the bottom of your notebook contains specific information regarding
the options you’ve chosen for your notebook. Following is an example configuration label.
Part Number
Configuration ID
No: AH2xxxxxxxxxxx
Part No: FPC0xxxxxxxxxxxxx
E8310, 15.4WXGA, T7100, XPP, DL S-MULTI, 512M, 80G, MDM/LAN, WLAN
Processor
Model #
Screen Size
Media Drive
Operating System
133
Downloaded from www.Manualslib.com manuals search engine
Hard Drive
Memory
Communications
Microprocessor
Intel® Core™ 2 Duo processors (Refer to the system label to determine the speed of your processor).
Chipset
• Intel GM965 or Intel PM965 (depending upon system configuration)
• I/O Controller Hub 8 Mobile (ICH8-M)
Memory
System Memory
• DDR2-667 MHz SDRAM dual-channel memory module.
• Two DIMM slots; upgradeable to 4 GB of total memory (2 GB x 2). Note that when 4 MB of
memory is installed in a Windows Vista system, approximately 3.3 GB is addressable memory; the
upper memory is reserved by Vista for hardware usage.
Cache Memory
2 MB or 4 MB L2 cache on-die (depending upon system processor)
Video
Built-in color flat-panel TFT active matrix LCD display with simultaneous display capability.
Video Color and Resolution
15.4" Crystal View Wide XGA model:
• Internal: 1280 x 800 pixel resolution, 16M colors
• External: 1600 x 1200 pixel resolution, 16M colors
• Simultaneous: 1600 x 1200, 16M colors
134 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
15.4” TFT Wide SXGA+ model:
• Internal: 1680 x 1050 pixel resolution, 16M colors
• External: 1600 x 1200 pixel resolution, 16M colors
• Simultaneous: 1600 x 1200, 16M colors
Video RAM
• Intel® Graphics Media Accelerator X3100 video graphics. Up to 384 MB shared video memory
using Dynamic Video Memory Technology (DVMT), or,
• NVIDIA GeForce 8400, with 128 MB of dedicated video memory
Audio
• Realtek codec ALC262 with 2-channel High Definition (HD) audio.
• Headphones: Depending upon your system configuration, you have one of the following:
• Stereo headphone jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms, or,
• Stereo headphone/line-out jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms
• Microphone: Depending upon your system configuration, you have one of the following:
• Mono microphone jack, 3.5 mm, 100 mVp-p or less, minimum impedance 10K Ohms, or,
• Stereo microphone/line-in jack, 3.5 mm, 100 mVp-p or less, minimum impedance 10K Ohms
• Two built-in stereo speakers, 20 mm diameter
Mass Storage Device Options
Hard Drive
• Serial ATA, 150 Mbps data buffer, 5400 rpm, 2.5”, 9.5 mm
• Choice of 40 GB, 60 GB, 80 GB, 100 GB, or 120 GB
135 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Media Player
Depending upon the configuration of your system, one of the following is installed.
• DVD-ROM Drive: 8x maximum read, or,
• Combo DVD/CD-RW Drive: 24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD-ROM, or,
• Dual-Layer Multi-Format DVD Writer: 24x CD-ROM, 24x CD-R, 10x CD-RW, 8x DVD-ROM,
5x DVD-RAM, 8x DVD-R, 4x DVD-R (DL), 6x DVD-RW, 8x DVD-R, 4x DVD-R (DL),
8x DVD-RW
Features
Integrated Pointing Device
• Touchpad pointing device with scroll button
• Optional Quick Point cursor control button
Communications
• Modem: Internal V.90 standard 56K fax/modem (ITU V.90, 56K data, 14.4K fax)
• Gigabit LAN: Internal wired 10/100/1000 Gigabit Ethernet LAN
Wireless LAN:
• Optional Integrated Intel Wireless WiFi Link 4965AGN
• Optional Bluetooth device for wireless personal area network communication
Optional WebCam
Optional 1.3 megapixel digital camera.
Trusted Platform Module
The LifeBook E8410 has a Trusted Platform Module (TPM) installed for added system security.
136 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
LifeBook Security/Application Panel
Button Label
Button Function
Default Application
1
Application A
Notepad
2
Application B
Calculator
3
Internet
Internet Explorer
4
E-Mail
Outlook
Application Launcher Defaults
Theft Prevention Lock
Two lock slots for use with security restraint systems.
Device Ports
On the LifeBook notebook:
• PC Card slot for one Type I or Type II card: PCMCIA Standard 2.1 with CardBus support
• ExpressCard slot for one ExpressCard
• Memory Stick/SD Card slot
• One 15-pin D-SUB connector for VGA external monitor (see Display specifications)
• Four USB 2.0 (Universal Serial Bus) connectors for input/output devices
• One DC In connector
• One serial port (RS-232, D-Sub 9-pin)
• One parallel port (ECP, D-Sub 25-pin)
• One IEEE 1394 (4-pin type) jack
• Infrared port (IrDA1.1, 4 Mbps max.)
137 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
• One 7-pin video out jack
• One modular modem (RJ-11) connector
• One LAN (RJ-45) connector
• Docking port (100-pin, to dock with port replicator)
• One stereo headphone jack or one stereo headphone/line-out jack, depending upon system
configuration. (See Audio specifications)
• One mono microphone jack or one stereo microphone/line-in jack, depending upon system
configuration. (See Audio specifications)
• Dedicated Smart Card slot (requires third-party application)
• Wireless LAN antenna with pre-installed on/off switch
On the Optional Port Replicator:
• One 6-pin mini DIN PS/2 compatible connectors for external keyboard or mouse
• One 25-pin D-SUB connector for parallel input/output devices; Bi-directional, output only or ECP
• One 15-pin D-SUB connector for VGA external monitor (see Display specifications)
• One 9-pin D-SUB connector for RS-232C serial input/output devices
• Four USB 2.0 connectors for input/output devices
• One LAN (RJ-45) connector
• One DC-in connector
• One microphone In jack
• One headphone jack
• One Digital Video (DVI-D) 24-pin, female interface
• One power/suspend/resume button with LED
138 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Keyboard
Built-in keyboard with all functions of 101 key PS/2 compatible keyboards.
• Total number of keys: 84
• Function keys: F1 through F12
• Feature extension key: Fn
• Two Windows keys: one Start key, one application key
• Key pitch: 19 mm
• Key stroke: 2.7 mm
• Built-in Touchpad pointing device with two left and two right buttons and scroll button.
• Optional Quick Point cursor control button
• Built-in Palm Rest
External Keyboard and/or Mouse Support
USB or PS/2-compatible (PS/2 compatible with Port Replicator only)
Power
Batteries
• Standard Lithium ion battery, rechargeable, 6-cell 10.8V, 5200 mAh, 56.1 Wh, or,
• High capacity 8-cell Lithium ion battery, rechargeable, 14.4V, 5200 mAh, 74.8 Wh
• Optional Flexible Bay battery: 6-cell Lithium ion battery, rechargeable, 10.8V, 3800 mAh, 41 Wh
AC Adapter
Autosensing 100-240V AC, supplying 19V DC, 5.27A, 100W to the LifeBook notebook; includes an
AC cable
139 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Power Management
Conforms to ACPI (Advanced Configuration and Power Interface).
Dimensions and Weight
Overall Dimensions
Approximately 14.06"(w) x 10.12"(d) x 1.40”/1.44”(h) (357 mm x 257 mm x 35.5/36.5 mm)
Weight
15.4" Crystal View Wide XGA model: Approximately 5.93 lbs. (2.69 kg) with battery and optical
drive
15.4” TFT Wide SXGA+ model: Approximately 6.11 lbs. (2.77 9kg) with battery and optical drive
Environmental Requirements
Temperature
Operating: 41° to 95° F (5° to 35° C)
Non-operating: 5° to 140° F (–15° to 60° C)
Humidity
Operating: 20% to 85%, relative, non-condensing
Non-operating; 8% to 85%, relative, non-condensing
Altitude
Operating: 10,000 feet (3,048 m) maximum
Popular Accessories
For ordering or additional information on Fujitsu accessories please visit our Web site at
www.shopfujitsu.com or call 1-800-FUJITSU.
140 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Pre-Installed Software
Depending on your pre-installed operating system, your notebook comes with pre-installed software
for playing audio and video files of various formats. In addition there is file transfer software, virus
protection software and Power Management software. The following list indicates the pre-installed
software on your system.
• Adobe Acrobat Reader
• Norton Internet Security™ 2007 (90-day free trial)
• Roxio Easy Media Creator (on select models)
• CyberLink PowerProducer
• Google Desktop
• Google Tool Bar
• Google Picasa
• OmniPass Fingerprint application
• Fujitsu Driver Update utility
• Microsoft Office Small Business Edition 2007 (60-day free trial)
• Microsoft Works 8.5
• Evernote
141 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Learning About Your Software
Tutorials
All operating systems and most application software have tutorials built into them upon installation.
We highly recommend that you step through the tutorial before you use an application.
Manuals
Included with your notebook you will find manuals for your installed operating system and other preinstalled software. Any manuals that are not included, are available online through the help system of
the software. We recommend that you review these manuals for general information on the use of these
applications.
Adobe Acrobat Reader
The Adobe Acrobat Reader allows you to view, navigate, and print PDF files from across all of the
major computing platforms.
Norton Internet Security 2007
Your system is preinstalled with a free 90-day trial version of Symantec’s Norton Internet Security™
2007. Norton Internet Security is a suite of tools designed to protect your LifeBook notebook from
computer viruses, hackers, spyware, and spam. It assists in the protection of data currently on your
hard disk from destruction or contamination. The trial version is activated upon your acceptance of
software license agreement. After 90 days, you will need to purchase a subscription from Symantec
to download latest virus, spyware, and spam definitions.
Roxio Easy Media Creator
Easy Media Creator allows you to easily burn CDs and organize, edit and share digital photos, music,
data, and videos.
CyberLink PowerProducer
CyberLink PowerProducer allows you to produce and edit home movies and slideshows on discs.
142 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
OmniPass Fingerprint application
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows,
applications, and on-line passwords, and presents a convenient user interface through which you can
securely manage passwords, users, and multiple identities for each user.
Google Desktop
Google Desktop lets you to search the contents of your computer for emails, web history, and files. It
also allows you to view news and photos from anywhere on your desktop.
Google Picasa
Google Picasa lets you to search for, locate, move and label all of the photos on your computer.
Google Toolbar
Google Toolbar lets you to search the Internet quickly, block pop-ups, and perform a variety of other
tasks to make your Internet experience easier and more pleasant.
Fujitsu Driver Update Utility
The Fujitsu Driver Update (FDU) utility is pre-installed on your system. With FDU, you can choose
to automatically or manually go to the Fujitsu site to check for new updates for your system. See
“Automatically Downloading Driver Updates” on page 123.
EverNote
EverNote allows you to easily capture, store and access a variety of documents, such as typed and
handwritten memos, webpage excerpts, emails, phone messages, addresses, passwords, sketches, and
documents.
143 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Operating System Options
Depending upon your system, one of the following operating system configurations will be installed:
Microsoft Windows XP Professional Edition
With Microsoft Works 8.5 and Microsoft Office 60-day trial (Small Business Edition 2007)
Microsoft Windows Vista Business Edition
With Microsoft Works 8.5 and Microsoft Office 60-day trial (Small Business Edition 2007)
Microsoft Works 8.5
Microsoft Works 8.5 is a software suite containing the basic tools to write letters and reports, track
family and friends with address books, manage home finances, and create a home inventory.
Microsoft Office 2007 Small Business Edition
Microsoft Office 2007 Small Business Edition is easy-to-use software to help you manage business
opportunities more effectively, create marketing materials, manage e-mail, and share information.
Microsoft SBE includes Microsoft Word, Excel, Outlook, PowerPoint, Publisher, and Business
Contact Manager.
144 - System Specifications
Downloaded from www.Manualslib.com manuals search engine
Glossary
AC Adapter
A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your
LifeBook notebook.
Access point
Wireless network device used to bridge wireless and wired network traffic.
ACPI
Advanced Configuration and Power Interface
Active-Matrix Display
A type of technology for making flat-panel displays which has a transistor or similar device for every
pixel on the screen.
Ad Hoc Mode
Ad Hoc Mode refers to a wireless network architecture where wireless network connectivity between
multiple computers is established without a central wireless network device, typically known as Access
Points. Connectivity is accomplished using only client devices in a peer-to-peer fashion. For details, refer
to on “Ad Hoc Mode” on page 170
145
Downloaded from www.Manualslib.com manuals search engine
ADSL
Asymmetric Digital Subscriber Line. Technology for transporting high bit-rate services over ordinary
phone lines.
AGP
Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as
video cards and 3D accelerators.
Auto/Airline Adapter
A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power
outlet to the DC voltage needed to power your LifeBook notebook.
BIOS
Basic Input-Output System. A program and set of default parameters stored in ROM which tests and
operates your LifeBook notebook when you turn it on until it loads your installed operating system
from disk. Information from the BIOS is transferred to the installed operating system to provide it with
information on the configuration and status of the hardware.
Bit
An abbreviation for binary digit. A single piece of information which is either a one (1) or a zero (0).
bps
An abbreviation for bits per second. Used to describe data transfer rates.
Boot
To start-up a computer and load its operating system from disk, ROM or other storage media into
RAM.
146 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Bus
An electrical circuit which passes data between the CPU and the sub-assemblies inside your LifeBook
notebook.
Byte
8 bits of parallel binary information.
Cache Memory
A block of memory built into the micro-processor which is much faster to access than your system
RAM and used in specially structured ways to make your overall data handling time faster.
CardBus
A faster, 32-bit version of the PC Card interface which offers performance similar to the 32-bit PCI
architecture.
CD-ROM
Compact disk read only memory. This is a form of digital data storage which is read optically with a
laser rather than a magnetic head. A typical CD-ROM can contain about 600MB of data and is not
subject to heads crashing into the surface and destroying the data when there is a failure nor to wear
from reading.
Channel
Range of narrow-band frequencies used by the WLAN device to transmit data. IEEE802.11b/g - 11
channels, 22 MHz wide channels.
CMOS RAM
Complementary metal oxide semiconductor random access memory. This is a technology for
manufacturing random access memory which requires very low levels of power to operate.
147 - Glossary
Downloaded from www.Manualslib.com manuals search engine
COM Port
Abbreviation for communication port. This is your serial interface connection.
Command
An instruction which you give your operating system. Example: run a particular application or format
a floppy disk.
Configuration
The combination of hardware and software that makes up your system and how it is allocated for use.
CRT
Cathode Ray Tube. A display device which uses a beam of electronic particles striking a luminescent
screen. It produces a visual image by varying the position and intensity of the beam.
Data
The information a system stores and processes.
DC
Direct current. A voltage or current that does not fluctuate periodically with time.
Default Value
A pre-programmed value to be used if you fail to set your own.
DHCP
Dynamic Host Configuration Protocol. A protocol used to automatically acquire parameters required
for the communication, such as IP address. The sender of IP address is called a DHCP server, and the
receiver is called a DHCP client.
148 - Glossary
Downloaded from www.Manualslib.com manuals search engine
DIMM
Dual-in-line memory module.
Disk
A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is
highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly
called a diskette.
Disk Drive
The hardware which spins the disk and has the heads and control circuitry for reading and writing the
data on the disk.
Diskette
A floppy disk in a hard housing with a shutter.
DMA
Direct Memory Access. Special circuitry for memory to memory transfers of data which do not require
CPU action.
DMI
Desktop Management Interface. A standard that provides PC management applications with a
common method of locally or remotely querying and configuring PC computer systems, hardware and
software components, and peripherals.
DNS
Domain Name System. A function to control the association between the IP address and the name
assigned to the computer. If you do not know the IP address but if you know the computer name, you
can still communicate to that computer.
149 - Glossary
Downloaded from www.Manualslib.com manuals search engine
DOS
Disk Operating System (MS-DOS is a Microsoft Disk Operating System).
Driver
A computer program which converts application and operating system commands to external devices
into the exact form required by a specific brand and model of device in order to produce the desired
results from that particular equipment.
DVMT
Dynamic Video Memory Technology. A video memory architecture that increases the efficiency of the
motherboard by using innovative memory utilization and direct AGP.
ECP
Extended Capability Port. A set of standards for high speed data communication and interconnection
between electronic devices.
Encryption Key (Network Key)
Data encryption key used to encrypt message text and for computing message integrity checks. Data
encryption protects data from unauthorized viewing.
This device uses the same encryption key to encode and decode the data, and the identical encryption
key is required between the sender and receiver.
ESD
Electro-Static Discharge. The sudden discharge of electricity from a static charge which has built-up
slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get from brushing
hair on a dry day.
FCC
Federal Communication Commission.
150 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Floppy Disk
A spinning platter of magnetic data storage media which is highly flexible.
GB
Gigabyte. One billion bytes.
Hard drive
A spinning platter of magnetic data storage media where the platter is very stiff.
I/O
Input/Output. Data entering and leaving your notebook in electronic form.
I/O Port
The connector and associated control circuits for data entering and leaving your notebook in electronic
form.
IDE
Intelligent Drive Electronics. A type of control interface for a hard drive which is inside the hard drive
unit.
IEEE802.11a
Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11a devices operate in the
5 GHz lower and middle UNII bands.
IEEE802.11b
Wireless LAN standard that supports a maximum data rate of 11 Mbps. 802.11b devices operate in the
2.4 GHz ISM band.
151 - Glossary
Downloaded from www.Manualslib.com manuals search engine
IEEE802.11g
Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the
2.4 GHz ISM band.
Infrared
Light just beyond the red portion of the visible light spectrum which is invisible to humans.
Infrastructure
A name of a wireless LAN configuration. This type of communication uses an access point. Another
type of communication is called Ad Hoc.
IP Address
An identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol
route messages based on the IP address of the destination. The format of an IP address is a 32-bit
numeric address written as four numbers separated by periods. Each number can be zero to 255. For
example, 1.160.10.240 could be an IP address.
Within an isolated network, you can assign IP addresses at random as long as each one is unique.
However, connecting a private network to the Internet requires using registered IP addresses (called
Internet addresses) to avoid duplicates.
The four numbers in an IP address are used in different ways to identify a particular network and a
host on that network. Three regional Internet registries -- ARIN, RIPE NCC and APNIC -- assign
Internet addresses from the following three classes.
Class A - supports 16 million hosts on each of 126 networks
Class B - supports 65,000 hosts on each of 16,000 networks
Class C - supports 254 hosts on each of 2 million networks
The number of unassigned Internet addresses is running out, so a new classless scheme called CIDR
is gradually replacing the system based on classes A, B, and C and is tied to adoption of IPv6.
152 - Glossary
Downloaded from www.Manualslib.com manuals search engine
IR
An abbreviation for infrared.
IrDA
Infrared Data Association. An organization which produces standards for communication using
infrared as the carrier.
IRQ
Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred
which needs to be processed.
KB
Kilobyte. One thousand bytes.
LAN
Local Area Network. An interconnection of computers and peripherals within a single limited
geographic location which can pass programs and data amongst themselves.
LCD
Liquid Crystal Display. A type of display which makes images by controlling the orientation of
crystals in a crystalline liquid.
Lithium ion Battery
A type of rechargeable battery which has a high power-time life for its size and is not subject to the
memory effect as Nickel Cadmium batteries.
LPT Port
Line Printer Port. A way of referring to parallel interface ports because historically line printers were
the first and latter the most common device connected to parallel ports.
153 - Glossary
Downloaded from www.Manualslib.com manuals search engine
MAC Address
Media Access Control Address. A unique physical address of a network card. For Ethernet, the first
three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes
are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique
physical address in the world, being assigned with a different address from other cards. For Ethernet,
frames are sent and received based on this address.
MB
Megabyte. One million bytes.
Megahertz
1,000,000 cycles per second.
Memory
A repository for data and applications which is readily accessible to your LifeBook notebook’s CPU.
MHz
Megahertz.
MIDI
Musical Instrument Digital Interface. A standard communication protocol for exchange of
information between computers and sound producers such as synthesizers.
Modem
A contraction for MOdulator-DEModulator. The equipment which connects a computer or other data
terminal to a communication line.
Monaural
A system using one channel to process sound from all sources.
154 - Glossary
Downloaded from www.Manualslib.com manuals search engine
MTU
Maximum Transmission Unit
The maximum data size that can be transferred at a time through the Internet or other networks. You
can set a smaller MTU size to obtain successful communication, if you have difficulty transferring
data due to the fact that the maximum size is too large.
Network key
Data that is used for encrypting data in data communication. The personal computer uses the same
network key both for data encryption and decryption, therefore, it is necessary to set the same network
key as the other side of communication.
Network name (SSID: Service Set Identifier )
When a wireless LAN network is configured, grouping is performed to avoid interference or data theft.
This grouping is performed with “Network name (SSID)”. In order to improve security, the network
key is set allowing no communication unless “Network name (SSID)” coincides with the network key.
NTSC
National TV Standards Commission. The standard for TV broadcast and reception for the USA.
Open system authentication
Null authentication method specified in the 802.11 standard that performs no authentication checks on
a wireless client before allowing it to associate.
Operating System
A group of control programs that convert application commands, including driver programs, into the
exact form required by a specific brand and model of microprocessor in order to produce the desired
results from that particular equipment.
155 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Partition
A block of space on a hard drive which is set aside and made to appear to the operating system as if it
were a separate disk, and addressed by the operating system accordingly.
PCMCIA
PCMCIA is a trademark of the Personal Computer Memory Card International Association. The
Personal Computer Memory Card International Association is an organization that sets standards for
add-in cards for personal computers.
Peripheral Device
A piece of equipment which performs a specific function associated with but not integral to a
computer. Examples: a printer, a modem, a CD-ROM.
Pitch (keyboard)
The distance between the centers of the letter keys of a keyboard.
Pixel
The smallest element of a display, a dot of color on your display screen. The more pixels per area the
clearer your image will appear.
POST
Power On Self Test. A program which is part of the BIOS which checks the configuration and
operating condition of your hardware whenever power is applied to your notebook. Status and error
messages may be displayed before the operating system is loaded. If the self test detects failures that
are so serious that operation can not continue, the operating system will not be loaded.
PPPoE
Point to Point Protocol over Ethernet. A protocol for Ethernet, using a Point-to-Point Protocol (PPP),
which is used for connection on the phone line.
156 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Program
An integrated set of coded commands to your computers telling your hardware what to do and how
and when to do it.
Protocol
Procedures and rules use to send and receive data between computers.
- Method of sending and receiving data
- Process used to handle communication errors
Conditions required for communication are organized in procedures for correct transfer of
information.
RAM
Random Access Memory. A hardware component of your LifeBook notebook that holds binary
information (both program and data) as long as it has the proper power applied to it.
RAM Module
A printed circuit card with memory and associated circuitry which allows the user to add additional
memory to the computer without special tools.
Reset
The act of reloading the operating system. A reset erases all information stored in RAM.
Restart
See Reset.
Resume
To proceed after interruption. In your notebook this refers to returning to active operation after having
been in one of the suspension states.
157 - Glossary
Downloaded from www.Manualslib.com manuals search engine
ROM
Read Only Memory. A form of memory in which information is stored by physically altering the
material. Data stored in this way can not be changed by your notebook and does not require power to
maintain it.
SDRAM
Synchronous Dynamic Random Access Memory.
Serial Port
A connection to another device through which data is transferred one bit at a time on a single wire with
any other wires only for control of the device not for transfer of data.
Shared key authentication
802.11 network authentication method in which the AP sends the client device a challenge text packet
that the client must then encrypt with the correct WEP key and return to the AP. If the client has the
wrong key or no key, authentication will fail and the client will not be allowed to associate with the
AP. Shared key authentication is not considered secure, because a hacker who detects both the cleartext challenge and the same challenge encrypted with a WEP key can decipher the key.
SSID
Service Set Identifier, a 32-character unique identifier attached to the header of packets sent over a
WLAN that acts as a password when a mobile device tries to connect to the BSS. The SSID
differentiates one WLAN from another, so all access points and all devices attempting to connect to a
specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can
provide the unique SSID. Because the SSID is broadcast in plain text, it does not supply any security
to the network.
Standby
To make inoperative for a period of time. Your LifeBook notebook uses various suspension states to
reduce power consumption and prolong the charge of your battery.
158 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Status Indicator
A display which reports the condition of some portion of your hardware. On your LifeBook notebook
this is an LCD screen just above the keyboard.
Stereo (audio)
A system using two channels to process sound from two different sources.
Subnet mask
TCP-IP network is controlled by being divided into multiple smaller networks (subnets). IP address
consists of the subnet address and the address of each computer. Subnet mask defines how many bits
of IP address comprise the subnet address. The same value shall be set among computers
communicating with each other.
SVGA
Super VGA.
S-Video
Super Video. A component video system for driving a TV or computer monitor.
System Clock
An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted
to provide time of day and date.
TCP/IP
Transmission Control Protocol/Internet Protocol. A standard Internet protocol that is most widely
used.
159 - Glossary
Downloaded from www.Manualslib.com manuals search engine
TFT
Thin Film Transistor – A technology for flat display panels which uses a thin film matrix of transistors
to control each pixel of the display screen individually.
UL
Underwriters Laboratories – An independent organization that tests and certifies the electrical safety
of devices.
USB
Universal Serial Bus. Standard that allows you to simultaneously connect up to 127 USB devices such
as game pads, pointing devices, printers, and keyboards to your computer.
VRAM
Video Random Access Memory. A memory dedicated to video display data and control.
WFM
Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of
business computing without sacrificing power and flexibility.
Wi-Fi Compatible
Wi-Fi (Wireless Fidelity) Identifies that the product has passed the interoperability test, supplied by
the WECA (Wireless Ethernet Compatibility Alliance), which guarantees the interoperability of
wireless IEEE 802.11 LAN products. For more information on the Wi-Fi standard, go to the WECA
Web site at: www.wirelessethernet.com.
WLAN
Wireless Local Area Network. A wireless interconnection of computers and peripherals within a
single limited geographic location which can pass programs and data amongst themselves.
160 - Glossary
Downloaded from www.Manualslib.com manuals search engine
Regulatory Information
Notice
Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate
the equipment.
FCC NOTICES
Notice to Users of Radios and Television
This equipment has been tested and found to comply with the limit for class B digital devices, pursuant
to parts 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet that is on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables must be employed with this equipment to ensure compliance with the
pertinent RF emission limits governing this device.
161 - Regulatory Information
Downloaded from www.Manualslib.com manuals search engine
Notice to Users of the US Telephone Network
This equipment complies with Part 68 of the FCC rules, and the requirements adopted by ACTA. On
the bottom of this equipment is a label that contains, among other information, the FCC registration
number and ringer equivalence number (REN) for this equipment; or a product identifier in the format
US:AAAEQ##TXXXX. If requested, this information or number must be provided to the telephone
company.
This equipment is designed to be connected to the telephone network or premises wiring using a
standard jack type USOC RJ11C. A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It
is designed to be connected to a compatible modular jack that is also compliant.
The ringer equivalent number (REN) of this equipment is 0.1B as shown on the label. The REN is used
to determine the number of devices that may be connected to a telephone line. Excessive RENs on a
telephone may result in the devices not ringing in response to an incoming call. In most but not all
areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total RENs, contact the local telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could effect the operation of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please refer to the
manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is
causing harm to the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
162 - Regulatory Information
Downloaded from www.Manualslib.com manuals search engine
The equipment cannot be used on public coin service provided by the telephone company. Connection
to party line service is subject to state tariffs. (Contact the state public utility commission, public
service commission or corporation commission for information).
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this computer does not disable your alarm equipment. If you have any questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device to send any message via a telephone fax machine unless such message
clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date an time it is sent and an identification of the business or other entity, or other
individual sending the message and the telephone number of the sending machine or such business,
other entity, or individual.
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial
brouilleur du Canada.
Notice to Users of the Canadian Telephone Network
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before the
registration number signifies that registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It does not imply that Industry
Canada approved the equipment.
163 - Regulatory Information
Downloaded from www.Manualslib.com manuals search engine
Before connecting this equipment to a telephone line the user should ensure that it is permissible to
connect this equipment to the local telecommunication facilities. The user should be aware that
compliance with the certification standards does not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian authorized maintenance
facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may
give the telecommunication company cause to request the user to disconnect the equipment from the
telephone line.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.1B. The REN
assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed five.
FOR SAFETY, USERS SHOULD ENSURE THAT THE ELECTRICAL GROUND OF THE POWER UTILITY, THE
TELEPHONE LINES AND THE METALLIC WATER PIPES ARE CONNECTED TOGETHER. USERS SHOULD
NOT ATTEMPT TO MAKE SUCH CONNECTIONS THEMSELVES BUT SHOULD CONTACT THE APPROPRIATE
ELECTRIC INSPECTION AUTHORITY OR ELECTRICIAN. THIS MAY BE PARTICULARLY IMPORTANT IN RURAL
AREAS.
Avis Aux Utilisateurs Du Réseau Téléphonique Canadien
AVIS: Le présent matériel est conforme aux spécifications techniques d’Industrie Canada applicables
au matériel terminal. Cette conformité est confirmée par le numéro d’enregistrement. Le sigle IC,
placé devant le numéro d’enregistrement, signifie que l’enregistrement s’est effectué conformément à
une déclaration de conformité et indique que les spécifications techniques d’Industrie Canada ont été
respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.
164 - Regulatory Information
Downloaded from www.Manualslib.com manuals search engine
Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifier s’il est permis
de connecter cet équipement aux installations de télécommunications locales. L’utilisateur est averti
que même la conformité aux normes de certification ne peut dans certains cas empêcher la dégradation
du service.
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de
maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément
approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de
télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
AVIS: L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.1B. L’IES assigné à
chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une
interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque
de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les
dispositifs n’excède pas 5.
POUR ASSURER LA SÉCURITÉ, LES UTILISATEURS DOIVENT VÉRIFIER QUE LA PRISE DE TERRE DU
SERVICE D’ÉLECTRICITÉ, LES LIGNES TÉLPHONIQUES ET LES CONDUITES D’EAU MÉTALLIQUES SONT
CONNECTÉES ENSEMBLE. LES UTILISATEURS NE DOIVENT PAS TENTER D’ÉTABLIR CES CONNEXIONS
EUX-MÊMES, MAIS DOIVENT CONTACTER LES SERVICES D’INSPECTION D’INSTALLATIONS ÉLECTRIQUES
APPROPRIÉS OU UN ÉLECTRICIEN. CECI PEUT ÊTRE PARTICULIÈREMENT IMPORTANT EN RÉGIONS
RURALES.
165 - Regulatory Information
Downloaded from www.Manualslib.com manuals search engine
Appendix A: WLAN User’s Guide
FCC Regulatory Information
Please note the following regulatory information related to the optional wireless LAN device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions,
however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency
safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or
environments, such as:
• On board an airplane, or
• In an explosive environment, or
• In situations where the interference risk to other devices or services is perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports,
hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating
the equipment.
166
Downloaded from www.Manualslib.com manuals search engine
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user
documentation provided with the product. Any changes or modifications made to this device that are not expressly
approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible
for any radio or television interference caused by unauthorized modification of this device, or the substitution or
attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of
the user to correct any interference caused by such unauthorized modification, substitution or attachment. The
manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government
regulations arising from failure to comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor
environments, and the antenna of this device must be integral.
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must
accept any interference, including interference that may cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance
with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1
2
3
4
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
167 - Appendix A: WLAN User’s Guide
Figure A-1. Ad Hoc Mode Network
Downloaded from www.Manualslib.com manuals search engine
FCC Radio Frequency Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters between the Wireless LAN antenna (located
on the top edge of the LCD screen) and your body. The transmitters in this device must not be co-located or operated in
conjunction with any other antenna or transmitter.
Export restrictions
This product or software contains encryption code which may not be exported or transferred from the US or Canada
without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as
well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate
the user's right to operate this equipment.
Canadian Notice
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to cochannel mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825
MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have
priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN
devices.
168 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Before Using the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional integrated
Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before
using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual
in a safe place for future reference.
Wireless LAN Device Covered by this Document
This document is applicable to systems containing the Intel Wireless WiFi Link 4965AGN.
Characteristics of the WLAN Device
• The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.
• The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license. The
WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands
of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
•
The Intel PRO/Wireless 4965AGN WLAN device is capable of four operating modes, IEEE802.11a, IEEE802.11b,
IEEE802.11g, and IEEE802.11n (draft)
•
The WLAN device is Wi-Fi certified and operates at a the maximum data rate of 540 Mbps (theoretical) in IEEE802.11n
(draft) mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.
•
•
The WLAN device supports the following encryption methods - WEP, TKIP, CKIP, and AES encryption.
The Wireless LAN device is compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and
CCX4.0.
169 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Wireless LAN Modes Using this Device
Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity
between multiple computers is established without a central wireless network device, typically known
as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion.
That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy
and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc
mode requires that the SSID, network authentication, and encryption key settings are identically
configured on all computers in the Ad Hoc network.
Ad Hoc Mode Network
170 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Access Point (Infrastructure) Mode
Infrastructure mode refers to a wireless network architecture in which devices communicate with
wireless or wired network devices by communicating through an Access Point. In infrastructure mode,
wireless devices can communicate with each other or with a wired network. Corporate wireless
networks operate in infrastructure mode because they require access to the WLAN in order to access
services, devices, and computers (e.g., file servers, printers, databases).
Access Point (Infrastructure) Mode Network
Internet
Wired LAN
ADSL modem,
cable modem,
or similar
Access Point*
Wireless LAN
171 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
*An optional hub for a wired
LAN may be required depending
upon the type of access point used.
How to Handle This Device
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under
normal circumstances, it should not be necessary for you to remove or re-install it. The Operating
System that your mobile computer comes with has been pre-configured to support the WLAN device.
•
•
•
Intel Wireless WiFi Link 4965AGN device supports IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n.
•
Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n
modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is
HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device.
The WLAN device operates in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.
Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency
range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates
in the 5 GHz RF band.
Deactivating/Disconnecting the WLAN Device
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or
where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can
be deativated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the
WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn
off the radio; it continues to transmit and receive even though it’s not connected.).
BEFORE USING THE WIRELESS LAN DEVICE, YOU MUST FIRST INSTALL CLICKME! TO ENSURE THAT
THE CORRECT SOFTWARE FOR YOUR DEVICE IS INSTALLED. SEE “INSTALLING CLICK ME!” ON
PAGE 28.
172 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Deactivation Using the Wireless On/Off Switch
The WLAN device can be deactivated quickly and efficiently by toggling the Wireless On/Off Switch
to the Off position. The Wireless On/Off switch has no effect on non-Wireless LAN models.
WLAN Switch
Wireless LAN On/Off Switch Location
Disconnection Using the Icon in the Taskbar
Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to
transmit and receive even though it’s not connected.
1
2
Right-click the WLAN icon in the taskbar at the bottom right of your screen.
Choose Disconnect from a network.
Activating the WLAN Device
Activation of the WLAN device can be accomplished using the same methods as the deactivation
process
•
•
Using the Wireless On/Off Switch
In Windows, by right-clicking the WLAN icon then clicking “Connect to a network”
173 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Configuring the Wireless LAN
The optional WLAN device can be configured to establish wireless network connectivity using the
software that is built into Windows Vista. Support for most industry standard security solutions is
contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:
Configuring the WLAN Using Windows Vista
1
2
Click the Start button, then select Control Panel.
3
4
5
Select “Manage wireless networks” from the left panel.
6
Enter the required information. It may be necessary to consult with your network administrator for some of the
information.
7
In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel ->
Network and Sharing Center), and type in relevant keywords in the Search box.
If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network and
Sharing Center icon.
Click on the [Add] button.
Depending upon what type of connection you would like to make, make a selection. For an infrastructure
network, select “Manually create a network profile. For ad hoc network, select “Create an ad hoc network”.
Connecting to a Network
After you have configured your computer, you can connect to an active network by performing the
following steps:
1
2
3
Click on the WLAN icon in the system tray.
Select “connect to a network”.
Select a network from the list that appears, and click the [Connect] button.
174 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Configuring the WLAN Using Windows XP
Using Intel PROSet Software
This section explains the procedure to properly configure the WLAN device in a system using
Windows XP using the Intel PROSet Software. Pre-defined parameters will be required for this
procedure. Please consult with your network administrator for these parameters:
Network Name - Also known as the SSID
Network Key (WEP) - Required if using static WEP keys.
Authentication Type - Open, Shared, WPA, or WPA-PSK
Procedure
1
2
3
4
5
6
7
8
9
Activate the WLAN device using either the Wireless On/Off Switch or the Intel PROSet software.
Click the [Start] button first and then [All Programs].
Click the icon [Intel PROSet Wireless] to execute the Intel PROSet Wireless software.
Click the [Add] button. The General Settings dialog displays.
Enter a profile name in the Profile Name field.
Enter the network SSID, in the Network Name (SSID) field.
Click Infrastructure or Ad Hoc for the operating mode.
Click [Advanced].
The Mandatory Access Point option is only used if Infrastructure mode is selected. Use this option to connect
to a specific access point. Enter the MAC address for the access point. Click OK to save the setting and return
to the General Settings page.
10 Click [Next].
11 If you are using Cisco CCX, click Cisco Options to enable Cisco CKIP data encryption on the Security Settings
page. Check the Cisco Compatible Extensions Options. If you have checked the Cisco's "Mixed-Cell" box in the
Advanced Setting, this option must also be checked.
12 Click [OK].
13 Click Next.
175 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
14 Select Open, Shared, WPA-Enterprise, WPA2-Enterprise, WPA-Personal, or WPA2-Personal in the Network
Authentication options.
15 Select either None, WEP, CKIP (if Enable Cisco Client eXtentions is enabled, use CKIP or WEP), or TKIP for
the data encryption.
16 If WEP is selected, select either 64 or 128-bit for the Encryption Level.
17 Select the key index 1, 2, 3 or 4.
18 Enter the WEP key if required. If your network does not employ a 802.1x/EAP security mechanism, please skip
to step 24.
19 Click the Enable 802.1x checkbox to enable the 802.1x security option. Please contact your network
administrator if configuration of this setting is required.
20 Select the appropriate Authentication Type. Please contact your network administrator if configuration of this
setting is required.
21 After selecting your authentication type, enter the user name, domain, and password of the user you have
created on the authentication server. The user name and password do not have to be the same as name and
password of your current Windows user login.
22 Click [OK] to save the settings.
23 From the Intel ProSet Wireless page, click the new profile name shown in the Profile List. Use the up and down
arrows to position the priority of the new profile in the priority list.
24 Click the Connect button to connect to the network.
25 Click [Close] if you want to close the Intel PROSet for Wireless window.
Connection to the network
This section explains connection to the network.
If there is an administrator of the network, contact the network administrator for data settings.
Setting the network
Perform the “Setting TCP/IP” and “Confirming the computer and work group names” operations
required for network connection.
176 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Setting TCP/IP
To change the setting of the IP address, you need to be logged in from Windows as an administrator.
1
2
Click the [Start] button first and then [Control Panel].
If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control
Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
3
4
Double-click [Network Connections]. A list of currently installed networks will be displayed.
5
6
Click the [General] tab if it is not already selected.
7
Set the IP address as follows:
Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The
[Wireless Network Connection Properties] window will be displayed.
Click [Internet Protocol (TCP/IP] and then click [Properties]. The [Internet Protocol (TCP/IP) Properties] window
will be displayed.
• For ad hoc connection: Select [Use the following IP address:] and then enter data for [IP address] and
[Subnet mask].
• For access point (infrastructure) connection: If your network uses DHCP, select [Obtain an IP address
automatically] and [Obtain DNS server address automatically]. If your network uses static IP addresses,
consult with your network administrator for the correct IP address settings.
8 Click the [OK] button. Processing will return to the [Wireless Network Connection Properties] window.
9 Click the [OK] button.
10 Close the [Network Connection] window.
Following this operation, confirm the names of the computer and the workgroup as follows.
177 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Confirming the computer and work group names
To modify the computer name and/or the work group name, you need to be logged in from Windows as an
administrator.
1
2
3
4
5
Click the [Start] button, then [Control Panel].
If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control
Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
Double-click the [System] icon. The [System Properties] window will be displayed.
Click the [Computer Name] tab.
Confirm the settings of [Full computer name:] and [Workgroup:].
a. The setting of [Full computer name:] denotes the name for identifying the computer. Any name can be
assigned for each personal computer.
To change the name, click [Change] and then proceed in accordance with the instruction messages displayed on
the screen.
Enter the desired name in less than 15 ASCII character code format. Identifiability can be enhanced by
entering the model number, the user name, and other factors.
b. [Workgroup name] is the group name of the network. Enter the desired name in less than 15 ASCII character
code format.
For ad hoc connection: Assign the same network name to all personal computers existing on the network.
For access point (infrastructure) connection: Assign the name of the work group to be accessed.
6
Click the [OK] button. If a message is displayed that requests you to restart the personal computer, click [Yes]
to restart the computer.
178 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Setting the sharing function
Set the sharing function to make file and/or printer sharing with other network-connected personal
computers valid. This operation is not required unless the sharing function is to be used.
The folder and printer for which the sharing function has been set will be usable from any personal
computer present on the network.
To share a file and/or the connected printer, you need to be logged in as an administrator.
Setting the Microsoft network-sharing service
1
2
Click the [Start] button first and then [Control Panel].
If the Control Panel is in Category view, switch to Classic view by clicking “Switch to Classic View” under Control
Panel the left frame. (If you are already in Classic view, “Switch to Category View” will be displayed.)
3
4
Double-click [Network Connections]. A list of currently installed networks will be displayed.
5
If [File and Printer Sharing for Microsoft Networks] is displayed, proceed to step 6. If [File and Printer
Sharing for Microsoft Networks] is not displayed, skip to step 7.
6
Make sure that the [File and Printer Sharing for Microsoft Networks] check box is checked, and then click the
[OK] button. Skip to “Setting file-sharing function”.
7
8
9
Click [Install]. The [Select Network Component Type] window will be displayed.
Right-click [Wireless Network Connection] in the list, and then click [Properties] in the menu displayed. The
[Wireless Network Connection Properties] window will be displayed.
Click [Service], then click the [Add] button. The [Select Network Service] window will be displayed.
Click [File and Printer Sharing for Microsoft Networks] and then click the [OK] button. Processing will return to
the [Wireless Network Connection Properties] window, and [File and Printer Sharing for Microsoft Networks] will
be added to the list.
10 Click the [Close] button.
179 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Setting the file-sharing function
Procedure for setting the file-sharing function follows, with “work” folder in drive C: as an example.
1
2
3
Click the [Start] button first and then [My Computer].
Double-click [Local disk (C:)].
Right-click the “work” folder (or whichever folder you want to share), and then click [Sharing and Security...] in
the menu displayed. The [Folder Name Properties] window will be displayed.
Setting the file-sharing function for the file which has been used to execute Network Setup Wizard is suggested
on the screen. For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID)
and the network key, the steps to be taken to set the file-sharing function easily without using Network Setup
Wizard are given below.
4
5
Click [Sharing] if it isn’t already selected.
6
7
Click “Just enable file sharing” and click [OK].
Click the link stating “If you understand the security risks, but want to share files without running the wizard,
click here”.
Check the [Share this folder on the network] check box.
To specify the corresponding folder as a read-only folder, select the [Read only] checkbox under the General tab.
8
Click the [OK] button. The folder will be set as a sharable folder, and the display of the icon for the “work.” folder
will change.
Setting the printer-sharing function
1
2
Click the [Start] button first and then [Printers and FAX]. A list of connected printers will be displayed.
Right-click the printer for which the sharing function is to be set, and then click [Sharing] in the menu displayed.
The property window corresponding to the selected printer will be displayed.
180 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Setting the printer-sharing function when Network Setup Wizard has been executed is suggested on the screen.
For the wireless LAN, however, since security is guaranteed by entry of the network name (SSID) and the
network key, the steps to be taken to set the printer-sharing function without using Network Setup Wizard are
laid down below.
3
4
5
6
Click the [Sharing] tab.
Click [Share this printer].
Enter the sharing printer name in [Share name].
Click the [OK] button.
Confirming connection
After you have finished the network setup operations, access the folder whose sharing has been set for
other personal computers. Also, confirm the status of the radio waves in case of trouble such as a
network connection failure.
In the case of access point (infrastructure) connection, enter the necessary data for the access point before
confirming connection. Refer to the manual of the access point for the access point setup procedure.
Connecting your personal computer to another personal computer
1
2
3
4
Click [Start] first and then [My Computer]. The [My Computer] window will be displayed in the left frame.
5
Double-click the folder to be accessed.
Click [My Network Places] in the “Other Places” list. The window [My Network Places] will be displayed.
Click [View workgroup computers] under Network Tasks in the left frame.
Double-click the personal computer to which your personal computer is to be connected. The folder that was
specified in “Setting the file-sharing function” on page 180 will be displayed.
Confirming the status of the radio
1
Right-click the Intel PRO Wireless icon in the lower right corner of the screen.
181 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
2
3
Click [Open Intel PROSet for Wireless]. The Intel PROSet for Wireless window opens.
Contained within the General tab and the Details section (accessed by pressing the [Details] button), you will
find the current operating status of the radio. (When the radio is turned off or the computer is not yet connected,
some of the conditions will not be displayed.)
• Network Name (SSID)
Displays the Network Name (SSID) currently used by the radio.
• Profile Name
The current configuration profile is displayed.
• Mode
Displays the current operating mode. [Infrastructure (AP)] or [Ad Hoc] will be displayed.
• Security
Displays the current security status of the profile being used:
None: No encryption used.
WEP: WEP encryption algorithm used.
CKIP: WEP encryption algorithm used.
TKIP: WEP encryption algorithm used.
• Speed
Displays the highest data rate of the associated access point in mega-bits-per-second (Mbps) until data
transfer occurs.
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54.
802.11b: 1, 2, 5.5, or 11.
• Band (Frequency)
Displays the current band and frequency being used. Displays Out of Range if no band and frequency is
displayed. Displays:
802.11g (2.4 GHz) or 802.11b (2.4 GHz)
• Channel
Displays the current transmit and receive channel being used.
4
802.1x Protocol
Displays Enabled if the profile uses 802.1x authentication. Default is Disabled.
182 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Troubleshooting the WLAN
Troubleshooting
Causes and countermeasures for troubles you may encounter while using your wireless LAN are
described in the following table.
Problem
Unavailable
network
connection
Possible Cause
Incorrect network
name (SSID) or
network key
Possible Solution
Ad hoc connection: verify that the network names (SSID’s) and network keys
(WEP) of all computers to be connected have been configured correctly. SSID’s
and WEP key values must be identical on each machine.
Access Point (Infrastructure) connection: set the network name (SSID) and
network key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access Point.
Please consult your network administrator for this value, if necessary.
Weak received
signal strength
and/or link quality
Ad hoc connection: Retry connection after shortening the distance to the
destination computer or removing any obstacles for better sight.
Access Point (Infrastructure) connection: Retry connection after shortening the
distance to the access point or removing any obstacles for better sight.
The WLAN device
has been
deactivated or
disabled
Check if the wireless switch is turned On. In Windows XP, go to Start ->
Settings -> Network Connections and right-click on Wireless Network
Connection. If Enable appear at the top of the menu, click it to enable the
device. In Windows Vista, go to Start -> Control Panel, and double-click on
Windows Mobility Center. If the wireless network is off, click the [Turn wireless
on] button..
The computer to be
connected is turned
off
Check if the computer to be connected is turned ON.
183 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Problem
Unavailable
network
connection
Possible Cause
Possible Solution
RF interference from
Access Points or
other wireless
networks
The use of identical or overlapping RF channels can cause interference with the
operation of the WLAN device. Change the channel of your Access Point to a
channel that does not overlap with the interfering device.
Wireless network
authentication has
failed
Re-check your Network Authentication, Encryption, and Security settings.
Incorrectly configured security settings such as an incorrectly typed WEP key,
a mis-configured LEAP username, or an incorrectly chosen authentication
method will cause the LAN device to associate but not authenticate to the
wireless network.
Incorrectly
configured network
settings
Recheck the configuration of your network settings.
Incorrect IP address
configuration
This only applies to networks using static IP addresses. Please contact your
network administrator for the correct settings.
(continued)
184 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
WLAN Specifications
Specifications
Item
Specification
Type of network
The Intel PRO/Wireless 4965AGN Network Connections WLAN device conforms to IEEE
802.11a, 802.11b/g, and 802.11n (draft-compliant), Wi-Fi based*.
Transfer rate
(Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined)
Active frequency
Typical operating distances**
Number of channels
Security
•
•
•
802.11n (draft): 2.4 GHz or 5 GHz
•
•
•
•
802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps
•
•
•
802.11a: 8 independent channels
802.11b/g: 2400~2473 MHz
802.11a: 4900 ~ 5850 MHz
802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps
802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps
802.11n (draft): Estimated double the operating distance of 802.11g and 802.11a
in their respective frequencies.
802.11b/g: 11 channels, 3 non-overlapping channels
802.11n (draft):
2.4 GHz - 3 non-overlapping channels when Channel Bonding is not used; 2 nonoverlapping channels when Channel Bonding is used.
5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding
Encryption Types - WEP, TKIP, AES***, WPA 1.0 compliant
Encryption Key lengths Supported: 64 bits and 128 bits 802.1x/EAP
Maximum recommended
number of computers to be
connected over wireless LAN
(during ad hoc connection)
10 units or less ****
185 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
*
“Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of
wireless LAN (Wi-Fi Alliance) has been passed.
** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective
material, or interference from external RF sources.
*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104
bits after subtracting the fixed length of 24 bits.
**** Depending on practical environments, the allowable number of computers to be connected may be decreased.
186 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Using the Bluetooth Device
The Integrated Bluetooth module (EYTF3CSFT) is an optional device available for Fujitsu mobile
computers.
What is Bluetooth
Bluetooth technology is designed as a short-range wireless link between mobile devices, such as
laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area
Networks (PANs) between devices in short-range of each other.
THE WIRELESS LAN/BLUETOOTH ON/OFF SWITCH WILL POWER OFF BOTH THE OPTIONAL WIRELESS
LAN AND BLUETOOTH DEVICES AT THE SAME TIME. TO ENABLE OR DISABLE EITHER ONE OF THE
DEVICES INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:
1 Slide the Wireless LAN/Bluetooth on/off switch to On position.
2 In the Control Panel, click the button associated with Bluetooth and/or Wireless LAN Status
to enable or disable the individual devices.
3 Click [OK].
Where to Find Information About Bluetooth
The Bluetooth module contains a robust Help user’s guide to assist you in learning about operation of
the Bluetooth device.
Windows XP: To access the Help file, click [Start] -> All Programs, and click on Toshiba. Select
Bluetooth, then select User’s Guide.
Windows Vista: o access the Help file, click [Start] -> All Programs, and click on Bluetooth, then
select User’s Guide.
For additional information about Bluetooth Technology, visit the Bluetooth Web site at:
www.bluetooth.com.
187 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The Bluetooth antenna is located on the right hinge of the LCD screen and is exempt
from minimum distance criteria due to its low power.
The transmitters in this device must not be co-located or operated in conjunction with any other
antenna or transmitter.
Canadian Notice
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed written
permission from Fujitsu. Unauthorized modification will void the equipment authorization from the
FCC and Industry Canada and the warranty.
188 - Appendix A: WLAN User’s Guide
Downloaded from www.Manualslib.com manuals search engine
Appendix B: Fingerprint Sensor Device
Introducing the Optional Fingerprint Sensor Device
Your system may have an optional fingerprint sensor device below the Touchpad, between the left and
right buttons. This also serves as a scroll button.
Fingerprint sensor
ALTHOUGH THE SYSTEM MAY HAVE A FINGERPRINT SENSOR IN PLACE OF A SCROLL BUTTON, THE
FINGERPRINT SENSOR CAN BE USED FOR SCROLLING. SIMPLY MOVE YOUR FINGERPRINT OVER THE
SENSOR THE SAME AS YOU WOULD USE A SCROLL BUTTON.
189
Downloaded from www.Manualslib.com manuals search engine
With a fingerprint sensor, you can avoid having to enter a username and password every time you want
to:
• Log onto Windows
• Resume from standby mode
• Cancel a password-protected screen saver
• Log into homepages that require a username and password
After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over
the sensor for the system recognize you.
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all
Windows, applications, and on-line passwords.
OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access
to the Windows desktop. This device results in a secure authentication system for restricting access to
your computer, applications, web sites, and other password-protected resources.
OmniPass presents a convenient graphical user interface, through which you can securely manage
passwords, users, and multiple identities for each user.
Getting Started
This section guides you through the preparation of your system for the OmniPass fingerprint
recognition application. You will be led through the OmniPass installation process. You will also be
led through the procedure of enrolling your first user into OmniPass.
Installing OmniPass
If OmniPass has already been installed on your system, skip this section and go directly to “User
Enrollment” on page 193. You can determine whether OmniPass has already been installed by
checking to see if the following are present:
190 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
• The gold key-shaped OmniPass icon in the system tray at the bottom right of the screen.
• The Softex program group in the Programs group of the Start menu
System Requirements
The OmniPass application requires space on your hard drive; it also requires specific Operating
Systems (OS’s). The minimum requirements are as follows:
• Windows XP Professional operating system
• At least 35 MB available hard disk space
Installing the OmniPass Application
If OmniPass is already installed on your system, go to “User Enrollment” on page 193. Otherwise
continue with this section on software installation.
FOR INSTALLATION, OMNIPASS REQUIRES THAT THE USER INSTALLING OMNIPASS HAVE
ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE
ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE
PROCEEDING WITH OMNIPASS INSTALLATION.
To install OmniPass on your system you must:
1
Insert the installation media for the OmniPass application into the appropriate drive. If you are installing from
CD-ROM or DVD-ROM, you must find and launch the OmniPass installation program (setup.exe) from the
media.
2
Follow the directions provided in the OmniPass installation program. Specify a location to which you would like
OmniPass installed. It is recommended that you NOT install OmniPass in the root directory (e.g. C:\).
3
Once OmniPass has completed installation you will be prompted to restart you system. Once your system has
rebooted you will be able to use OmniPass. If you choose not to restart immediately after installation, OmniPass
will not be available for use until the next reboot.
4
The installation program automatically places an icon (Softex OmniPass) in the Windows Control Panel as well
as a golden key shaped icon in the taskbar.
191 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Verifying Information about OmniPass
After you have completed installing OmniPass and restarted your system, you may wish to check the
version of OmniPass on your system.
To check the version information of OmniPass:
1
From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the
lower right corner of the screen),
or,
Click the Start button, select Settings, and click Control Panel (if you are using Windows XP you will see the
Control Panel directly in the Start menu; click it, then click Switch to Classic View). Double-click Softex
OmniPass in the Control Panel, and the OmniPass Control Center will appear. If it does not appear, then the
program is not properly installed,
or,
Click the Start button, select Programs, and from the submenu select the Softex program group, from that
submenu click OmniPass Control Center.
2
Select the About tab at the top of the OmniPass Control Panel. The About tab window appears with version
information about OmniPass.
Uninstalling OmniPass
FOR UNINSTALLATION, OMNIPASS REQUIRES THAT THE USER UNINSTALLING OMNIPASS HAVE
ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE
ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE
PROCEEDING WITH OMNIPASS UNINSTALLATION.
To remove the OmniPass application from your system:
1
2
3
Click Start on the Windows taskbar. Select Settings, and then Control Panel.
Double-click Add/Remove Programs.
Select OmniPass, and then click Change/Remove.
192 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
4
5
Follow the directions to uninstall the OmniPass application.
Once OmniPass has finished uninstalling, reboot your system when prompted.
User Enrollment
Before you can use any OmniPass features you must first enroll a user into OmniPass.
Master Password Concept
Computer resources are often protected with passwords. Whether you are logging into your computer,
accessing your email, e-banking, paying bills online, or accessing network resources, you often have
to supply credentials to gain access. This can result in dozens of sets of credentials that you have to
remember.
During user enrollment a "master password” is created for the enrolled user. This master password
“replaces” all other passwords for sites you register with OmniPass.
Example: A user, John, installs OmniPass on his system (his home computer) and enrolls an
OmniPass user with username “John_01” and password “freq14”. He then goes to his webmail site to
log onto his account. He inputs his webmail credentials as usual (username “John_02” and password
“lifebook”), but instead of clicking [Submit], he directs OmniPass to Remember Password. Now
whenever he returns to that site, OmniPass will prompt him to supply access credentials.
John enters his OmniPass user credentials (“John_01” and “freq14”) in the OmniPass authentication
prompt, and he is allowed into his webmail account. He can do this with as many web sites or
password protected resources he likes, and he will gain access to all those sites with his OmniPass user
credentials (“John_01” and “freq14”). This is assuming he is accessing those sites with the system
onto which he enrolled his OmniPass user. OmniPass does not actually change the credentials of the
password protected resource. If John were to go to another computer without he OmniPass account to
access his webmail, he would need to enter his original webmail credentials (“John_02” and
“lifebook”) to gain access. If he attempts his OmniPass user credentials on a system other than a
system he’s enrolled on, he will not gain access.
193 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR
ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH OMNIPASS. IF YOU DESIRE
SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT.
Basic Enrollment
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified
otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you
do not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select
Programs; select Softex; click OmniPass Enrollment Wizard.
1
Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard
enters the credentials of the currently logged in Windows user.
2
Enter the password you use to log in to Windows. This will become the “master password” for this OmniPass
user. In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or
when accessing corporate resources, the Domain: may not be your Windows computer name. Click [Next] to
continue.
3
In this step OmniPass captures your fingerprint. Refer to “Enrolling a Fingerprint” on page 195 for additional
information.
4
Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on
Beginner mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get
accustomed to how OmniPass operates. Click [Next] to proceed with user enrollment. You will then see a
Congratulations screen indicating your completion of user enrollment.
5
Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if you’d like to log in to OmniPass with
your newly enrolled user; click [Yes].
194 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your system and streamline the authentication
procedure.
You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, doubleclick the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the
User Settings area. Click Enroll Authentication Device and authenticate at the authentication
prompt to start device enrollment.
1
1.During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have
already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked
by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled
and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to
enroll and click [Next].
2
2.It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before
OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen
times out, click [Back] to restart the fingerprint enrollment process.
Your system has a “swipe” fingerprint sensor. A swipe sensor is small and resembles a skinny elongated
rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second
knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger
screen has a [Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how
your fingerprint is captured, proceed to enroll a finger.
3
3. Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically
appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were
having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture
window and the text Verification Successful under the capture window.
195 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Using OmniPass
You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your
authentications.
Password Replacement
You will often use the password replacement function. When you go to a restricted access website
(e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to
enter your login credentials. OmniPass can detect these prompts and you can teach OmniPass your
login credentials. The next time you go to that website, you can authenticate with your fingerprint to
gain access.
OmniPass Authentication Toolbar
After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows
Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass
authentication system is invoked. The OmniPass authentication system may be invoked frequently:
during Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming
from standby or hibernate, when unlocking a password-enabled screensaver, during password
replacement for remembered site or application logins, and more. When you see this toolbar,
OmniPass is prompting you to authenticate.
The Logon Authentication window indicates what OmniPass-restricted function you are attempting.
The icons in the lower left (fingerprint and key) show what authentication methods are available to
you. Selected authentication methods are highlighted while unselected methods are not. When you
click the icon for an unselected authentication method, the authentication prompt associated with that
method is displayed.
When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for
the fingerprint capture window or your master password for the master password prompt (the key
icon).
196 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Remembering a Password
OmniPass can remember any application, GUI, or password protected resource that has a password
prompt.
Using the following procedure, you can store a set of credentials into OmniPass. These credentials will
then be linked to your “master password” or fingerprint.
Go to a site that requires a login (username and password), but do not log in yet. At the site login
prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit
[Enter], [Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember
Password from the submenu. The Windows arrow cursor will change to a golden key OmniPass
cursor. Click the OmniPass cursor in the login prompt area, but don’t click [Login] or [Submit].
Associating a Friendly Name
After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a
“friendly name” for this site. You should enter something that reminds you of the website, the
company, or the service you are logging into. In its secure database, OmniPass associates this friendly
name with this website.
Additional Settings for Remembering a Site
When OmniPass prompts you to enter a “friendly name” you also have the opportunity to set how
OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles
a remembered site.
The default setting is Automatically click the “OK” or “Submit” button for this password
protected site once the user is authenticated. With this setting, each time you navigate to this site
OmniPass will prompt you for your master password or fingerprint authentication device. Once you
have authenticated with OmniPass, you will automatically be logged into the site.
Less secure is the option to Automatically enter this password protected site when it is activated.
Do not prompt for authentication. Check the upper box to get this setting, and each time you
navigate to this site OmniPass will log you into the site without prompting you to authenticate.
197 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS
SETTING, YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE
SITE. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR OMNIPASS USER LOGGED IN,
ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN
AUTOMATIC ACCESS.
If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your
master password or fingerprint authentication device. Once you have authenticated with OmniPass
your credentials will be filled in to the site login prompt, but you will have to click the website [OK],
[Submit], or [Login] button to gain access to the site.
Click Finish to complete the remember password procedure. The site location, the credentials to
access the site, and the OmniPass authentication settings for the site are now stored in the OmniPass
secure database. The OmniPass authentication settings (Settings for this Password Site) can always
be changed in Vault Management.
Logging in to a Remembered Site
Whether or not OmniPass prompts you to authenticate when you return to a remembered site is
determined by Settings for this Password Site and can be changed in Vault Management.
The following cases are applicable to using OmniPass to login to: Windows, remembered web sites,
and all other password protected resources.
With Master Password
Once you return to a site you have remembered with OmniPass, you may be presented with a master
password prompt. Enter your master password and you will be allowed into the site.
198 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Logging into Windows with a Fingerprint Device
When logging into Windows with a fingerprint device, the fingerprint capture window will now
appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate.
You will be simultaneously logged into Windows and OmniPass. The capture window will also appear
if you have used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in
as stated above.
IF A MACHINE IS LOCKED AND OMNIPASS DETECTS A DIFFERENT USER LOGGING BACK IN WITH A
FINGERPRINT, THE FIRST USER WILL BE LOGGED OUT AND THE SECOND USER LOGGED IN.
In Windows XP, your login options must be set either for classic login, or for fast user switching and
logon screen to be enabled to use your fingerprint to log on to Windows. To change this go to Control
Panel, select User Accounts and then click Change the way users log on or off. If your Windows
screensaver is password protected, the fingerprint capture window will now appear next to screensaver
password dialog during resume. You can authenticate to your screensaver password prompt with your
enrolled finger.
Password Management
OmniPass provides an interface that lets you manage your passwords. To access this GUI, doubleclick the OmniPass key in the system tray. Click Vault Management; you will be prompted to
authenticate. Once you gain access to Vault Management, click Manage Passwords under Vault
Settings. You will see the Manage Passwords interface, with a list of friendly names.
You can view the credentials stored for any remembered website by highlighting the desired resource
under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an
account expire, you can remove stored credentials from OmniPass. Highlight the desired resource
under Password Protected Dialog and click Delete Page. You will be prompted to confirm the
password deletion.
199 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate
or directly logs you into the remembered site.
OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember
Password on an already remembered site.
The exception to the above rule is when resetting the Windows password. If your password is reset in
Windows, the next time you login to Windows, OmniPass will detect the password change and prompt
you to “Update” or “Reconfirm” the password with OmniPass. Enter your new Windows password in
the prompt and click OK. Your OmniPass "master password" will still be your Windows password.
OmniPass User Identities
Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com
and boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to
remembering one account per site.
To create and manage identities, double-click the OmniPass key in the system tray. Click Vault
Management; OmniPass will prompt you to authenticate. Once you gain access to Vault
Management, click Manage Identities under Vault Settings. You can only manage the identities of
the currently logged in OmniPass user
To add a new identity, click New Identity or double-click Click here to add a new identity. Name
the new identity and click [OK], then click [Apply]. You can now switch to the new identity and start
remembering passwords.
To delete an identity, highlight the identity you want to delete and click [Delete Identity], then click
[Apply].
WHEN YOU DELETE AN IDENTITY, ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD
PROTECTED DIALOGS ARE LOST.
200 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
To set the default identity, highlight the identity you want as default and click [Set as Default]; click
[Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will
automatically be logged in to the default identity for that OmniPass user. You can choose the identity
with which you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your username in the User Name: field. Press [Tab] and
see that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you
will see the pull-down menu in the Identity: field. Select the identity to login as, then click OK.
Switch User Identity
To switch identities at any time, right-click the OmniPass system tray icon and click Switch User
Identity from the submenu. The Switch Identity dialog will appear. Select the desired identity and
then click OK.
Identities and Password Management
On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center,
there is a pull-down selection box labeled, Identity. This field lets you choose which identity you are
managing passwords for. When you select an identity here, only those password protected dialogs that
are associated with that identity are shown. You can perform all the functions explained in “Password
Management” on page 199.
201 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Configuring OmniPass
This section gives an overview of both the Export/Import function and the OmniPass Control Center.
Exporting and Importing Users
YOU CANNOT IMPORT A USER INTO OMNIPASS IF THERE ALREADY IS A USER WITH THE SAME NAME
ENROLLED IN OMNIPASS.
Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export
process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All
OmniPass data for a user is backed up to a single encrypted database file. During the import process,
the Windows login of the exported user is required. If the proper credentials cannot be supplied, the
user profile will not be imported.
•
YOU SHOULD PERIODICALLY EXPORT YOUR USER PROFILE AND STORE IT IN A SAFE PLACE. IF ANYTHING
OMNIPASS PROFILE TO A NEW SYSTEM AND HAVE ALL
YOUR REMEMBERED SETTINGS AND FINGERPRINTS INSTANTLY.
HAPPENS TO YOUR SYSTEM, YOU CAN IMPORT YOUR
•
YOU DON'T FORGET THE WINDOWS LOGIN CREDENTIALS WHEN EXPORTING. WHEN YOU EXAMINE THE IMPORTATION, YOU
THE CREDENTIALS THAT WILL ALLOW A USER PROFILE TO BE IMPORTED ARE THE
WINDOWS LOGIN CREDENTIALS OF THE EXPORTED USER. THEY ARE THE CREDENTIALS THAT HAD TO BE SUBMITTED WHEN
THE USER PROFILE WAS EXPORTED. YOU WILL NEED USER NAME, PASSWORD, AND DOMAIN.
ARE PROMPTED FOR AUTHENTICATION.
Exporting an OmniPass User Profile
To export a user, open the OmniPass Control Center, and click Import/Export User under Manage
Users.
Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon
successfully authentication, you must name the OmniPass user profile and decide where to save it. An
.opi file is generated, and you should store a copy of it in a safe place.
202 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
This .opi file contains all your user specific OmniPass data, and it is both encrypted and password
protected. This user profile does NOT contain any of your encrypted data files.
Importing an OmniPass User Profile
To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under
Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File
(*.opi) and click Next. OmniPass will then prompt you to browse for the file you had previously
exported (.opi file). When you select the .opi file for importation, OmniPass will prompt you for
authentication. The credentials that will allow a user profile to be imported are the Windows login
credentials of the exported user. They are the credentials that had to be submitted when the user profile
was exported. You will need User Name, Password, and Domain. If you don’t remember the value for
Domain, in a PC or SOHO environment Domain should be your computer name.
OmniPass will notify you if the user was successfully imported.
Things to Know Regarding Import/Export
• Assume you export a local Windows User profile from OmniPass. You want to import that profile
to another machine that has OmniPass. Before you can import the profile, a Windows user with the
same login credentials must be created on the machine importing the profile.
Example: I have a Windows user with the username “Tom” and the password “Sunshine” on my
system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my
passwords to new system. I export Tom’s OmniPass user profile. I go to my new system and using
the Control Panel I create a user with the username "Tom" and the password "Sunshine". I can now
successfully import the OmniPass user data to the new system.
• If you export an OmniPass-only user, you can import that user to any computer running OmniPass,
provided that a user with that name is not already enrolled in OmniPass.
• If you attempt to import a user profile who has the same name as a user already enrolled in
OmniPass, the OmniPass import function will fail.
203 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
OmniPass Control Center
This section will serve to explain functions within the OmniPass Control Center that weren’t explained
earlier.
You can access the OmniPass Control Center any of three ways:
• Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lowerright corner of the desktop)
• Click the Start button; select the Programs group; select the Softex program group; and click the
OmniPass Control Center selection.
• Open the Windows Control Panel (accessible via Start button --> Settings --> Control Panel) and
double-click the Softex OmniPass icon.
User Management
The User Management tab has two major interfaces: Add/Remove User and Import/Export User.
Import/Export User functionality is documented in “Exporting and Importing Users” on page 202.
Add/Remove User functionality is straightforward.
If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The
Enrollment Wizard is documented in “User Enrollment” on page 193.
If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate.
Authenticate with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass
will prompt you to confirm user removal. Click OK to complete user removal.
REMOVING A USER WILL AUTOMATICALLY DESTROY ALL OMNIPASS DATA ASSOCIATED WITH THAT USER.
ALL IDENTITIES AND CREDENTIALS ASSOCIATED WITH THE USER WILL BE LOST.
IF YOU’RE SURE YOU WANT TO REMOVE THE USER, WE RECOMMEND YOU EXPORT THE USER PROFILE.
204 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
User Settings
The User Settings tab has four interfaces: Audio Settings, Taskbar Tips, and Enrollment. User
settings allow users to customize OmniPass to suit their individual preferences. Under User Settings
(Audio Settings and Taskbar Tips) you can set how OmniPass notifies the user of OmniPass events
(e.g., successful login, access denied, etc.). The details of each setting under the Audio Settings and
Taskbar Tips interfaces are self-explanatory.
The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll and
authentication device refer to Chapter 2.3. To enroll additional fingerprints, click Enroll
Authentication Device, and authenticate with OmniPass. Select the fingerprint recognition device in
the Select Authentication Device screen (it should already be marked by a green check if you have a
finger enrolled) and click Next.
System Settings
The OmniPass Startup Options interface can be found in the System Settings tab. With these options
you can specify how your OmniPass Logon is tied to your Windows Logon.
The first option, Automatically log on to OmniPass as the current user, will do just as it says;
during Windows login, you will be logged on to OmniPass using your Windows login credentials. If
the user logging into Windows was never enrolled into OmniPass, upon login no one will be logged
on to OmniPass. This setting is appropriate for an office setting or any setting where users must enter
a username and password to log into a computer. This is the default setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to
login once you have logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to
be logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log
in User from the right-click menu.
205 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Troubleshooting
You cannot use OmniPass to create Windows users. You must first create the Windows user, and you
will need administrative privileges to do that. Once the Windows user is created, you can add that user
to OmniPass using the same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local
security settings. You can do this by going to Start, Control Panel, Administrative Tools, and Local
Security Settings. Expand Local Policies, expand Security Options, and double-click Network
Access: Sharing and Security Model for Local Accounts. The correct setting should be Classic Local Users Authenticate as Themselves.
Cannot add a User with a Blank Password to OmniPas
If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust
your local security settings. First attempt the procedure explained in the Cannot add Windows user to
OmniPass section. If the difficulties persist, then try the following procedure.
Click Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local
Policies, expand Security Options, and double-click Accounts: Limit local account use of blank
passwords to console login only. This setting should be set to Disabled.
Dialog appears after OmniPass authentication during Windows Logon
After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You
authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs
you into Windows. You may, during this OmniPass authentication, see a Login Error dialog box.
This dialog box occurs when OmniPass was unable to log you into Windows with the credentials
supplied (username and password). This could happen for any of the following reasons:
• Your Windows password has changed
• Your Windows account has been disabled
206 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
If you are having difficulties due to the first reason, you will need to update OmniPass with your
changed Windows account password. Click Update Password and you will be prompted with a dialog
to reconfirm your password.
Enter the new password to your Windows user account and click OK. If the error persists, then it is
unlikely the problem is due to your Windows user account password changing.
207 - Appendix B: Fingerprint Sensor Device
Downloaded from www.Manualslib.com manuals search engine
Index
shorted 68
Standby mode 67
BIOS
guide 55
setup utility 54
Bluetooth
Where to Find Information 187
Built-in Speakers 102
A
About This Guide 1, 9
AC
adapter 49
indicator 25
plug adapters 128
Anti-theft lock slot 20
Application Panel 38
Auto/Airline Adapter 49
Automatically Downloading Driver Updates 123
C
CapsLock 27
CD-ROM 70, 102, 103
Click Me! 58
Clicking 32
Cold-swapping 37, 68
Configuration Label 133
Controls and Connectors 13
Conventions Used in the Guide 9
Cursor 31
Cursor Keys 29
B
Battery 65
alarm 67
bay 23
care 129
charging indicator 26
cold-swapping 68
conserving power 60
dead 108
faulty 109
increasing life 129
level indicators 25
lithium ion battery 65
low 67
problems 108, 109
recharging 66
replacing 68
D
DC Output Cable 49
DC Power Jack 49
Device Ports 90, 137
DIMM 86
Disk
care 130
208
Downloaded from www.Manualslib.com manuals search engine
Display Panel 14, 50
adjusting 51
brightness 51
closing 51
latch 14
opening 50
problems 111, 112
Docking Port 93
Double-Clicking 33
Dragging 33
Drivers and Application Restore CD 120
DVD drive
access indicator 26
problems 102, 103
tray release 74, 119
uninstalling OmniPass 192
user enrollment 193
using OmniPass 196
Flexible Bay 19, 36
cold-swapping 37
devices 36
eject lever 19
installing 36
Modular Multi-Format DVD Writer 70
removing 36
Fujitsu Contact Information 10
Fujitsu Driver Update utility 59, 123, 143
Fujitsu LifeBook
storing 127
traveling 127
Function Key
F10 30
F3 30
F4 30
F6 30
F7 30
F8 30, 35
F9 30, 35
FN 30
E
Emergency tray release 20
Error Messages 114
ExpressCards 80
External Floppy Disk Drive
problems 104
External Monitor Port 19, 97
F
H
FDU 59, 123, 143
Fingerprint Sensor Device 189
enrolling a fingerprint 195
getting started 190
installing OmniPass 190
logging into a remembered site 198
OmniPass authentication toolbar 196
password replacement 196
remembering a password 197
Hard Disk Drive
access indicator 27
problems 104
Headphone Jack 15, 96
Hibernation Feature 62
disable/enable 62
209
Downloaded from www.Manualslib.com manuals search engine
Software 71, 74
using 76
Memory
capacity 89
compartment 22, 86
installing 86
problems 105
removing 88, 89
upgrade module 86
Memory Stick
installing 79
removing 79
Microphone Jack 15, 97
Microsoft Works 144
Modem 16
problems 105
Modem Jack 90
Modem Result Codes 119
Modular Devices 36
installing 36
removing 36
Mouse
problems 104
I
Infrared Port 95
Installing 81, 83
Internal LAN Jack 91
IrDA 95
IrDA port 15
K
Keyboard 14, 28
cursor keys 29
function keys 29
numeric keypad 29
problems 104
windows keys 29
L
LAN (RJ-45) Jack 20
LifeBook Security Application Panel
buttons 45
configuring 45
deactivating 46
deactivating and activating 46
launching applications 45
operating 41
passwords 39
uninstalling 43
LifeBook Security/Application Panel 14
N
NumLk 27
O
Optical Digital Audio-Out Jack 18
Optical Drive 70
M
Media Player
care 131
Control Panel 75
loading 71
removing 73
P
Parallel Port 92
problems 106
210
Downloaded from www.Manualslib.com manuals search engine
S
PC Card
access indicator 27
care 132
problems 106, 107
slot 17
PC Cards
removing 82, 84
Pointing Device
See Touchpad 31
Port Replicator
connector 23
problems 103
Power
AC adapter 48
Auto/Airline adapter 48
failure 107, 108
indicator 24
management 60
off 63
on 52
problems 110
sources 48
Power Management 60
Power On Self Test 52, 114
Power/Suspend/Resume Button 14, 60
Pre-Installed Software 141
Adobe Acrobat Reader 142
Google Toolbar 143
manuals 142
ScrLk 27
SD Card
installing 79
removing 79
SDRAM 22, 86
Secure Digital Card
removing 79
Security Indicator 27
Security Panel 38
Serial Port 93
problems 106
Specifications 133
Audio 135
Chipset 134
Dimensions and Weight 140
Environmental Requirements 140
Keyboard 139
Memory 134
Microprocessor 134
Power 139
Video 134
Standby Mode 60
Status Indicator Panel 14, 24
Stereo Speakers 15
T
Touchpad 31
buttons 31
controls 33
Touchpad Pointing Device 15
Troubleshooting 99
R
Registration 58
Restarting 63
RJ-11 90
RJ-45 91
211
Downloaded from www.Manualslib.com manuals search engine
U
Universal Serial Bus Ports 94
Unpacking 12
USB 94, 106
problems 106
USB 2.0 Ports 19, 20
V
Volume control 35
W
Warranty 11
Windows keys 29
Application key 29
Start keys 29
Wireless LAN
Before Using the Wireless LAN 169
Specifications 185
Troubleshooting 183
using Intel PROSet software 175
212
Downloaded from www.Manualslib.com manuals search engine