U.S. Gauge
U.S. Gauge
U.S. Gauge
U.S. Gauge
U.S. Gauge
Product Selection Guide
U.S. Gauge
A Long History of Quality
U.S.
Gauge was found-
ed in 1904 with 14 employees in
Sellersville, Pennsylvania, outside of
Philadelphia. During the 1940s, U.S.
Gauge became part of AMETEK.
Today, AMETEK U.S. Gauge has
primary manufacturing located in
Largo, Florida and Peck, Michigan
for process gauges and diaphragm
seals. Clawson, Michigan is home to our
Distribution Center. Customer service, sales,
applications, and marketing are based out of
our facility in Horsham, Pennsylvania.
U.S. Gauge
Measurement Devices to Meet Any Need
A
METEK U.S. Gauge is one of the world’s largest suppliers of pressure gauges, diaphragm seals, bimetallic
thermometers, thermowells, pressure transducers and transmitters, pneumatic controllers, ultra-high-purity gauges
and switches, and submersible level instrumentation. All gauges are manufactured to ASME B40.100 specifications.
Pressure Measurement Technology
PMT
Products was founded in the 1960’s, and has been developing a variety of pressure trans-
ducers and pressure transmitters over the years, ranging from low cost general industrial units to Intrinsically
Safe, or Explosion Proof, units for hazardous locations. Transducers and transmitters are available in vacuum
pressure, gauge pressure, absolute pressure, and compound gauge pressure. The pressure transmitter line
includes specialized Military QPL MIL-P-24212C (SH) and MIL-T-24742 (SH) approved units for the U.S. Navy.
PMT also offers pneumatic pressure controllers and submersible level transducers. Products are manufactured
at both the Horsham, Pennsylvania and San Luis Obispo, California plants, and shipped worldwide.
PROCESS
Pressure Gauges
Clockwise from left: Models 1929, 1986, 1931, XR, 1933, and 1901.
Accuracy
Size
Case Material
Wetted Parts
Connection
Vacuum to 1000 psi
± (0.5% of FS)
4.5" (114 mm)
PET
316L Stainless Steel
1980 
Vacuum to 11600 psi
± (0.5% of FS)
4.5" (114 mm)
PET
316L Stainless Steel
Vacuum to 10 000 psi
± (0.5% of FS)
4.5" (114 mm)
Thermoplastic
Monel
Vacuum to 1000 psi
± (0.5% of FS)
4.5" (114 mm) or
6" (152 mm)
Aluminum
Phosphor Bronze and Brass




Vacuum to 1000 psi
± (0.5% of FS)
4.5" (114 mm) or
6" (152 mm)
Aluminum
Phosphor Bronze and Brass

1903 
Vacuum to 10 psi /
15 "H2O to 200 "H2O
± (1.0% of FS)
4.5" (114 mm)
PET
316L Stainless Steel

1929 
Vacuum to 6000 psi
± (0.5% of FS)
4.5" (114 mm) or
6" (152 mm)
Aluminum
316L Stainless Steel

1931 
Vacuum to 11600 psi
± (0.5% of FS)
4.5" (114 mm)
Aluminum
316L Stainless Steel
1933 
Vacuum to 3000 psi
± (0.5% of FS)
4.5" (114 mm) or
4" (102 mm)
PET
316L Stainless Steel


Pressure Range
Specifications
1981 
1986 
1901 
XR * 
Model
*1981 with all-welded diaphragm seal
Case Material
Wetted Parts
Connection
Vacuum to 23 000 psi
± (1.6 or 1.0% of FS)
2.5" (63 mm) or
4" (100 mm) or
6" (152 mm)
Stainless Steel
316L Stainless Steel

656

Vacuum to 23 000 psi
± (1.6 or 1.0% of FS)
2.5" (63 mm) or
4" (100 mm)
Stainless Steel
316L Stainless Steel

659

Vacuum to 15 000 psi
± (3-2-3% of FS) or ± (1.0% of FS)
2.5" (63 mm) or
4" (100 mm)
Stainless Steel
316L Stainless Steel

1550/1553 
Vacuum to 10 000 psi
± (3-2-3% of FS) or ± (1.0% of FS)
1.5" (38 mm) or
2" (51 mm) or
2.5" (63 mm) or
4" (100 mm)
Stainless Steel
Phosphor Bronze and Brass

1555/1558/ 
1559
Pressure Range
Specifications
LIQUID FILLABLE
Accuracy
Size
Model
From left to right: Models 659, 1558, and 1550.
LM: low or stem mount
CBM: center back mount
CBM-FF: center back mount with front flange
CBM-U-Clamp: center back mount with U-Clamp
LBM-U-Clamp: low back mount with U-Clamp
Solid Front
LBM-FF: low back mount with front flange
Open Front
GENERAL EQUIPMENT
TEST
Pressure Gauges
Clockwise from left: Models 562, P-500, 1409, 834, P-915 LM, 570, 1403, and P-915 CBM.
U.S. Gauge
Accuracy
Size
Case Material
Wetted Parts
Connection
Vacuum to 5000 psi
± (0.25% of FS)
4.5" (114 mm) or
6" (152 mm)
Aluminum
Phosphor Bronze or Copper
and Brass

1403 
Vacuum to 5000 psi
± (0.25% of FS)
4.5" (114 mm) or
6" (152 mm)
Aluminum
Phosphor Bronze or Copper
and Brass

1404 
0 to 5000 psi
± (0.5% of FS)
3" (76 mm)
ABS
Phosphor Bronze or Copper
and Brass

1409 
Pressure Range
Specifications
Model
Accuracy
Size
Case Material
Wetted Parts
Connection
Vacuum to 5000 psi
± (3-2-3% of FS)
1.5" (38 mm) or
2" (51 mm) or
2.5" (63 mm) or
3.5" (89 mm) or
4.5" (114 mm)
Painted Steel
Phosphor Bronze or Copper
and Brass

P500 
0 to 400 psi
± (3-2-3% of FS)
1.5" (38 mm) or
2" (51 mm)
Painted Steel
Phosphor Bronze and Brass

P500 
Low Lead
Vacuum to 2000 psi
± (3-2-3% of FS)
1.5" (38 mm)
Painted Steel
Phosphor Bronze or Copper
and Brass

562 
0 to 300 psi
± (3-2-3% of span)
Polypropylene
Phosphor Bronze and Brass
570 
0 to 300 psi
± (3-2-3% of FS)
1.5" (38 mm) or
2" (51 mm)
ABS
Phosphor Bronze or Copper
and Brass


Vacuum to 5000 psi
± (3-2-3% of span)
2" (51 mm) or
2.5" (63 mm) or
3.5" (89 mm)
Painted Steel
Phosphor Bronze or Copper
and Brass

844 
845
Phosphor Bronze and Brass

915 
Vacuum to 4000 psi
Pressure Range
± (3-2-3% of FS) or
± (1.6% of span)
2" (51 mm)
40 mm or
50 mm or
63 mm or
ABS
590 
Pressure Accessories
We have a wide range of accessories to support and
protect your pressure gauges, including protective
rubber boots, snubbers, and
overpressure protectors.
Specifications
Model
From left to right: Siphon, Stainless Steel and Brass Porous Pressure Snubbers, Overpressure Protector, and Gauge Boot.
LM: low or stem mount
CBM: center back mount
CBM-FF: center back mount with front flange
CBM-U-Clamp: center back mount with U-Clamp
LBM-U-Clamp: low back mount with U-Clamp
Solid Front
LBM-FF: low back mount with front flange
Open Front
Pressure Gauges
SPECIAL APPLICATIONS
Accuracy
Size
From top to bottom: Models 1590, 1535, 1785, 534, 1088, 600, and 1370.
Case Material
Wetted Parts
Connection
Application
Vacuum to 300 psi
± (3-2-3% of span)
2.5" (63 mm) or
3.5" (89 mm)
Painted Steel
316L Stainless Steel and
Nickel Plated Steel

Ammonia Refrigerant
1706

0 to 75 psi / 0 to 320° F
± (3-2-3% of span)
2.5" (63 mm)
Painted Steel
Brass
Boiler Pressure
1088

Vacuum, 0-30" Hg
± (3-2-3% of span)
2" (51 mm)
Chrome Plated Brass
Copper and Stainless Steel
Canned Food
534

0 to 4000 psi
± (3-2-3% of span)
1.5" (38 mm) or
2" (51 mm) or
2.5" (63 mm) or
50 mm
Brass /Painted Steel
Phosphor Bronze or Copper
and Brass



(for OEMs)
Compresssed Gas
Medical Equipment
P-600 
Series
Vacuum to 6000 psi
± (3-2-3% of span)
1.5" (38 mm)
304 Stainless Steel
316L Stainless Steel

Specialty Gas / Corrosion
Weather Resistance
1521

Vacuum to 6000 psi
± (3-2-3% of span)
2" (51 mm)
304 Stainless Steel
316L Stainless Steel

Specialty Gas / Corrosion
Weather Resistance
1522

Vacuum to 3000 psi
± (1% of span) or
± (2% of span)
2" (51 mm) or
2.5" (63 mm)
Drawn Stainless Steel
316L Stainless Steel

Specialty Gas / Corrosion
Weather Resistance
1535

Vacuum to 800 psi
± (3-2-3% of span)
2.5" (63 mm)
ABS
Phosphor Bronze and Brass
HVAC Refrigerant
1785

0 to 15 "H2O / 0 to 200 "H2O
± (3-2-3% of span)
2.5" (63 mm)
Painted Steel
Copper Alloy and Brass


Low Pressure
733 & 
734
Vacuum to 1000 psi
± (1.5-1-1.5% of span)
4.5" (114 mm)
304 Stainless Steel
Phosphor Bronze or Copper
and Brass

Mechanical Contractors
5105
Vacuum to 20 psi /
0 to 300 "H2O
± (3-2-3% of span)
1.5" (38 mm)
304 Stainless Steel
316L Stainless Steel

Medical Equipment
P-500 
3 to 15 psi
(inner scale 0-10 or 0-100)
± (2-1-2% of span)
2" (51 mm) or
2.5" (63 mm) or
3.5" (89 mm)
Painted Steel
Copper and Brass

Receiver Gauge
1370

Vacuum to 300 psi
± (3-2-3% of span)
3.5" (89 mm)
Black Thermoplastic
Phosphor Bronze and Brass
Sprinkler Systems
1590

0 to 60 psi
± (3-2-3% of span) or
± (1.6% of span)
2" (51 mm)
Brass-plated Steel
Phosphor Bronze and Brass


Tire Pressure
168866 
0 to 60 psi
± (3-2-3% of span) or
± (1.6% of span)
2" (51 mm)
Chrome-plated Steel
Phosphor Bronze and
Chrome Aluminum

Tire Pressure
169113 
Pressure Range
Specifications
LM: low or stem mount
CBM: center back mount
CBM-FF: center back mount with front flange
CBM-U-Clamp: center back mount with U-Clamp
Model
LBM-U-Clamp: low back mount with U-Clamp
Solid Front
LBM-FF: low back mount with front flange
Open Front

Diaphragm Seals
U.S. Gauge
VARIOUS APPLICATIONS
From left to right: Type T, Type ST, Type E, Type SCE, and Type C.
Process Connection
Lower Housing
Diaphragm Material
Type
Mating Instrument
29 "Hg to 600 psi
3-A Tri-clamp
(Sanitary)
316L SST
316L SST
Welded
2.5" (63 mm) & 4" (100 mm) Gauges,
Switches or Transducers/Transmitters
Type C
0 to 5000 psi
Threaded
316L SST, 304L SST, HASTELLOY® C276
316L SST, 304L SST, HASTELLOY® C276,
Tantalum
Welded
2.5" (63 mm) to 4" (100 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type E
29 "Hg to 1250 psi or
Flange Dependent
Threaded, Flange, or
Flow Through
Metals incl: 316L SST, 304L SST, HASTELLOY® C276,
Inconel 600, Monel 400, Titanium, & other *.
Polymers incl: Teflon™, Kynar®, PVC, & others **
Buna N, EPT, Kalrez 1050®, Neoprene, Viton
Removable
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type L
60 psi to 2500 psi or
Flange Dependent
Threaded, Flange, or
Flow Through
Metals incl: 316L SST, 304L SST, HASTELLOY® (C276,
C22, or B), Inconel 600 or 625, Monel 400, Tantalum,
& Titanium.
Polymers incl: Teflon™, Kynar®, PVC, & others **
316L SST, 304L SST, HASTELLOY®
(C276, C22, or B), Inconel 600 or 625, Monel 400,
Tantalum, and Titanium
Removable
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type R
60 psi to 2500 psi or
Flange Dependent
Threaded, Flange, or
Flow Through
Metals incl: 316L SST, 304L SST, HASTELLOY® (C276,
C22, or B), Inconel 600 or 625, Monel 400, & Titanium.
Polymers incl: Teflon™, Kynar®, PVC, & others **
316L SST, 304L SST, Alloy 20, HASTELLOY®
(C276, C22, or B), Inconel 600, Monel 400, Nickel,
Tantalum, and Titanium
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type S
60 psi to
Flange Dependent
Flange
Alloy 20, 304L SST, 316L SST, HASTELLOY® C276 or B,
Inconel 600 or 625, Monel 400, Nickel, & Titanium
316L SST, 304L SST, Alloy 20, HASTELLOY®
C276 or B, Inconel 600, Monel 400 (only with
Monel housing), Nickel, Tantalum, and Titanium
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type SCE Extended
Length Tank Application
Welded Metal Diaphragm
Series
60 psi to
Flange Dependent
Flange
316L SST, HASTELLOY® C276
316L SST, HASTELLOY® C276, Tantalum
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type SCW Slip-Flanged
Welded Metal Diaphragm
Series
60 psi to
Flange Dependent
Flange
Alloy 20, 304L SST, 316L SST, HASTELLOY®
(C276, C22, or B), Inconel 600 or 625, Monel 400,
Nickel, Steel & Titanium
316L SST, 304L SST, Alloy 20, HASTELLOY®
(C276, C22, or B), Inconel 600 or 625, Monel 400
(only with Monel housing), Nickel, Tantalum,
and Titanium
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type SFX Limited Space
60 psi to 1500 psi or
Flange Dependent
Inline
304L SST, 316L SST, Steel
316L SST, 304L SST, Alloy 20, HASTELLOY® C276
or B, Inconel 600, Monel 400 (only with Monel
housing), Nickel, Tantalum, and Titanium
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type SMJ/SNJ
29 "Hg to 0 to 15 psi
up to1500 psi, or
Flange Dependent
Threaded, Flange, or
Inline
Alloy 20, 304L SST, 316L SST, HASTELLOY®
(C276, C22, or B), Inconel 600 or 625, Monel 400,
Nickel, Steel, Titanium, & Zirconium
316L SST, 304L SST, Alloy 20, HASTELLOY®
(C276, C22, or B), Inconel 600 or 625, Monel 400
(only with Monel housing), Nickel, and Tantalum
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type ST
29 "Hg up to 1500 psi or
Flange Dependent
Threaded, Flange, or
Inline
Metals incl: 316L SST, 304L SST, HASTELLOY® (C276,
C22, or B), Inconel 600 or 625, Monel 400, Tantalum,
& Titanium.
Polymers incl: Teflon™, Kynar®, PVC, & others **
Teflon™
Removable
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type T
60 psi to 3000 psi
Threaded
316L SST, 304L SST, HASTELLOY® C or B, and
Monel 400
316L SST, HASTELLOY® C, Tantalum, and
Monel 400
Welded
2.5" (63 mm) to 6" (160 mm) Gauges,
Switches, Recorders, Transducers/Transmitters
Type XR
Pressure Range
Specifications
* Other Metals could includes: Hastelloy C22, Hastelloy B, Inconel 625, Nickel, Steel, Alloy 20, C20, and Zirconium
** Other Polymers could include: Teflon 15, Teflon (carbon filled), Teflon (graphite filled), CPVC, and Polypropylene.
Sanitary Series
Economy Series
Low Pressure Series
Removable
Diaphragm Series
Welded Metal
Diaphragm Series
(Low Profile) Welded
Metal Diaphragm Series
Jacketed Pipe Inline
Series
Low Pressure
Metal Diaphragm Series
Teflon Diaphragm Series
All Welded Gauge & Seal
Model
SUBMERSIBLE LEVEL
PRESSURE
Transmitters
From top to bottom: Models IDT, 831, 675, 88, 851, SST, and 375.
Accuracy
Approvals
Process Connection
Output
Wetted Parts
0 to 300 psi (0 to 690 ft water)
± (0.25% of FS) BFSL
Explosion Proof,
Intrinsically Safe
1/2" NPT Female
4 to 20 mA
316L Stainless Steel
88 — Field
Adjustable
0 to 500 psid,
0 to 6 psi thru 0 to 5000 psi
± (0.30% of FS) BFSL
Explosion Proof
1/2" NPT Female,
1/4" and 1/2" NPT Female
4 to 20 mA, 1 to 5 VDC,
0.8 to 3.2 VDC
316L Stainless Steel w/
optional HASTELLOY® C
diaphragm
831 — Differential
and Low Power
Options
0 to 3 psi thru 0 to 5000 psi
± (0.25% of FS) BFSL
Explosion Proof,
Intrinsically Safe
1/2" NPT or
Flush Connection
4 to 20 mA
316L Stainless Steel w/
optional HASTELLOY® C
diaphragm
851 — Bench
Adjustable
Vacuum 0 to 5000 psi
(Vacuum to 0 to 340 bar)
± (0.20% of FS) BFSL
Intrinsically Safe
1/4" or 1/2" NPT
4 to 20 mA, 0 to 5 VDC,
1 to 5 VDC, 1 to 6 VDC,
0.5 to 4.5 VDC
316L Stainless Steel w/
optional HASTELLOY® C
or Monel diaphragm
IDT
Pressure Range
Specifications
Model
Accuracy
Approvals
Sensing Port
Electrical Connection
Wetted Parts
0 to 150 psi (0 to 345 ft water)
± (0.25% of FS) BFSL
None —
General Industrial
Delrin Snubnose
Polyurethane,
Polyolefin, or
Teflon Cable
316L Stainless Steel,
Polyurethane (or Polyolefin
or Teflon), Viton, Delrin
SDT
0 to 300 psi (0 to 690 ft water)
± (0.25% of FS) BFSL
None —
General Industrial
Delrin or SST Snubnose,
or Flush Mount
Polyurethane Cable
Potted w/ Vent Tube
316L Stainless Steel,
Polyurethane, Viton, Delrin
375
0 to 150 psi (0 to 345 ft water)
± (0.20% of FS) BFSL
None —
General Industrial
Delrin Snubnose w/
.69" diameter
Polyurethane Cable
Potted w/ Vent Tube
316L Stainless Steel,
Polyurethane, Viton, Delrin
SST
Slim-Line
0 to 300 psi (0 to 690 ft water)
± (0.25% of FS) BFSL
Intrinsically Safe
Protected Flush Cage,
Nylon or SST Snubnose,
or Flush Mount
Teflon or Polyurethane
Cable (optional Potting
and Vent Tube
316L Stainless Steel,
Polyurethane (or Teflon),
Viton
575 and 575
Protected
Flush Cage
0 to 60 psi (0 to 138 ft water)
± (0.25% of FS) BFSL
Intrinsically Safe
3.5" Diaphragm
protected by 4.75" Cage
Polyurethane Cable
Potted w/ Vent Tube
316L Stainless Steel,
Polyurethane, Viton
675
Shark Cage
Pressure Range
Specifications
Model
Level Measurement System
The all-in-one customized LevelMate III meter displays data from any AMETEK submersible level transmitter, provides excitation
voltage and transmits an analog signal for remote recording, alarm or submersible pump control functions. It is easy to calibrate
by front panel adjustments.
LevelMate III
INDUSTRIAL
Transducers
U.S. Gauge
Accuracy
Process Connection
Electrical Connection
Output
Wetted Parts
0 to 3000 psi
± (0.20% of FS) BFSL
1/8 or 1/4 NPT or
7/16"-20 SAE
Cable, Din, Packard,
Bendix or Conduit
0 to 100 mV
316L Stainless Steel
or Brass
ACT
0 to 3000 psi
± (0.20% of FS) BFSL
1/8 or 1/4 NPT or
7/16"-20 SAE
Cable, Din, Packard,
Bendix or Conduit
4 to 20 mA, 1 to 5 VDC,
1 to 6 VDC, 0 to 5 VDC
316L Stainless Steel
or Brass
DCT
Vacuum to 10 000 psi
± (1.0 % of FS) BFSL
1/4 NPT
9.4 mini DIN or 3-pin
Packard
4 to 20 mA, 0 to 5 VDC
316L Stainless Steel
ECPT10
0 to 10 000 psi
± (0.50% of FS) BFSL
1/4 NPT Male,
7/16-20 UNF or
G1/4 Male
M12 (5-pin)
Switch to 250 mA max
for (PNP), or
200 mA max for (NPN)
17-4PH stainless steel
PST360
Vacuum to 5000 psi
± (0.25% of FS) BFSL
1/8 NPT
Packard Connector and
18" #20 AWG Wire
1 to 6 VDC
316L Stainless Steel
SPT
Pressure Range
Specifications
Model
Sta-Kool
Cooling Element
NAVAL
The Sta-Kool protects pressure
Accuracy
Process Connection
Electrical Connection
MIL Spec
Wetted Parts
Vacuum to 10 000 psi,
0 to 400 psid
± (1.0% of FS) BFSL
7/16-20 Thread for
1/4" Tube
Mil-Spec Connectors
with SS optional
QPL: MIL-D-24304B,
MIL-P-24212C (SH)
316L Stainless Steel
Vacuum to 10 000 psi,
0 to 600 psid
± (1.0% of FS) BFSL
7/16-20 Thread for
1/4" Tube
Mil-Spec Connectors
with SS optional
MIL-T-24742, MIL-STD-901D, 316L Stainless Steel
MIL-STD-461, MIL-STD-167
Pressure Range
Specifications
equipment by reducing the
89
742
process temperature by the
time the media gets inside
the gauge, transmitter,
Model
transducer or switch.
From left to right: Models SPT, DCT, ACT, ECPT10, PST360, 89, and 742.
ANALOG & DIGITAL
Temperature
Accuracy
Connection
Dial or Indicator
Lens
Housing
30 to 240° F
± 1 scale division
1/2-14 NPT
Lower Mount (571)
Back Mount (572)
Magnifying glass tube;
black temperature scale
Brass Bulb Shield
Cast Aluminum
571, 572-5"
Industrial Thermometer
-40 to 300° F (multiple available ranges)
± 1 scale division
1.25"-18 Connecting
Nut
Magnifying glass tube;
black temperature scale
Cast Aluminum
Bulb Shield
Cast Aluminum
571-9"
Industrial Thermometer
0 to 1000° F (multiple available ranges)
± (1.0% of Full Span)
1/2-14 NPT
Cupped Anti-parallax Dial
Glass
304 Stainless Steel
ADJ Bimetallic Thermometer
0 to 1000° F (multiple available ranges)
± (1.0% of Full Span)
1/2-14 NPT
Cupped Anti-parallax Dial
Glass
304 Stainless Steel
BAC Bimetallic Thermometer
-50 to 1500° F
± (1.0% of FS)
1/2-14 NPT
3.5 Digit LCD Display
0.7" High Numerals
VALOX Bezel/Face
302 Stainless Steel
DT-8300
Digital Thermometer
-58 to 1832° F
± 1° C /1.8° F
Thermowell, Wall,
or Pipe Mount
3.5 Digit LCD Display
0.5" High Numerals
Tempered Glass
Aluminum or
Stainless Steel
DT-8300EX Explosion-proof
Digital Thermometer
Pressure Range
Specifications
TW–Thermowell
Model
From left to right: DT-8300, 571-9",
572-5", ADJ, BAC, and DT-8300EX.
We recommend the use of a thermowell in conjunction with a bimetallic thermometer when the
application involves a corrosive medium, high
pressure, or high flow velocity. Perfect for
applications requiring protection for
unarmored liquid-in-glass test thermometers, or other temperature
sensing elements with a maximum diameter of .25”.
TW–Thermowell.
Other Products
Pneumatic Controllers
A
METEK-PMT Model 40 Pneumatic Pressure Controllers automati-
U.S. Gauge
Ultra High Purity Products
O
ur high purity pressure gauges are designed
cally position a valve or other final control element to maintain process
and manufactured for ultra high-purity gas
pressure at the desired set point. The Model 40 Pneumatic Controller is
distribution equipment used in semicon-
a rugged unit that works as a receiving controller that can control any
ductor and electronic manufacturing. These
process variable transmitted as a pneumatic signal.
instruments are compatible with many toxic
and corrosive gases. Welded male or female
face seal connections (MVCR & FVCR) provide a
Model 40 Pneumatic Controllers.
threadless pressure seal and virtually eliminate a
major source of contamination. Also available in NPT
connections. Gauges and pressure switches are available
in both low mount and center back mount configurations.
From left to right: Models 1536 Gauge
and IPS300 Pressure Switch.
A Range of Other Capabilities
 Mounting gauges, transmitters, and switches on diaghragm seals.
 Quick-ship gauges and seals.
 NIST Calibration Certificates for gauges or seals.
 Meets EPA Quad Zero requirement.
 Certificate of Conformance.
 P, P+I, and PID control modes.
 NACE certifications for gauges or seals.
 Many outputs including 3-15 psi.
 MIL certifications for seals and gauges.
 5" WC to 3000 psi ranges.
 Liquid filling of gauges and seals.
 Units available with an extensive list of options.
 Oxygen cleaning of gauges or seals.
India
Tel +91 22 2836 4750
United Kingdom
Tel +44 (0) 1243 833 302
USA, Pennsylvania
Tel +1 (215) 674 1234
Singapore
Tel +65 6484 2388
France
Tel +33 (0) 30 68 89 40
USA, Florida
Tel +1 (800) 527 9999
China, Shanghai
Tel +86 5868 5111
Germany
Tel +49 (0) 2159 9136 510
USA, California
Tel +1 (800) 444 1850
China, Beijing
Tel +86 10 8526 2111-19/24/25
Denmark
Tel +45 4816 8000
(1.5M218P) 160184
www.ametekusg.com
No part of this document may be reproduced or
modified in any form or by any means, electronic
U.S. Gauge
©2018 AMETEK Incorporated
or mechanical, without express written permission
from AMETEK Incorporated.
Download PDF