tia
l
Industrial Temp SATA DOM
en
BT-DOM J500 (H_L)
M
em
or
ig
h
tc
on
fid
SATAII-3.0 Gb/s
Industrial Temperature Grade
SATA-DOM
Revision: V02
Memoright Corp.
Date:
September
9F,535,
Zhong Zheng2013
Rd, Xin Dian Dist.,
Memoright reserves the right to change products or specifications without notice.
Revision: V02
New Taipei City, Taiwan
Page 1 of 15
BT-DOM J500 (H_L)
Industrial Temp SATA DOM Solid State Drive – BT-DOM J500 (H_L) Series
4 GB~16 GB
1. Features
Form Factor

Available Capacities

Highly integrated controller for NAND Flash memory

Sustained Read Performance: up to 85 MB/s

Sustained Write Performance: up to 80 MB/s
Low Power Consumption



Supply Voltage 5V  5%
ECC

Built-in 16/24 bit EDC/ECC function
High Reliability
tia
Up to 300 MB/s burst transfer rate in SATAII, 3 Gb/s
en

fid

High Performance
on

SLC NAND Flash
l

tc

4 GB~16 GB (SLC NAND Flash)
ig
h

SATA-DOM Solid State Drive (SSD)

MTBF > 4,000,000 hours

Endurance: In normal operation condition, guarantees for 5 years product lifetime for the SSD
or



Dynamic, static and active balanced wear-leveling strategy

Bad-Block Management
Certificate
M

em
capacity sequential write per day.

Fully Compliant with RoHS directive

CE and FCC compliant
Temperature Ranges

Industrial Temperature Range: -40℃ ~+85℃
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 2 of 15
BT-DOM J500 (H_L)
2. Contents
1.
Features...................................................................................................................................................... 2
2.
3.
Contents ..................................................................................................................................................... 3
Ordering Information ................................................................................................................................. 4
3.1 Part Number Decoder .......................................................................................................................... 5
General Description ................................................................................................................................... 6
4.
4.1
7.
Pin Assignment......................................................................................................................................... 11
8.
7.1
Pin Assignment .......................................................................................................................... 11
Feature Descriptions ................................................................................................................................ 12
Wear Leveling ............................................................................................................................ 12
Bad Block Management ........................................................................................................... 12
tc
8.1
8.2
on
fid
en
tia
l
5.
6.
Physical Description ................................................................................................................... 6
4.2
System Performance .................................................................................................................. 7
4.3
Environmental Specifications .................................................................................................... 7
4.4
Reliability ...................................................................................................................................... 8
4.5
Physical Dimensions................................................................................................................... 8
Physical Dimension Diagram (Horizontal Without Housing) ..................................................................... 9
Functional Block Diagram ........................................................................................................................ 10
M
em
or
ig
h
8.3
Endurance .................................................................................................................................. 12
8.4
ECC ............................................................................................................................................. 12
8.5
Standards Compliance ............................................................................................................. 12
9. Mean Time Between Failure .................................................................................................................... 13
10.
Supported ATA Commands .................................................................................................................. 14
11. Contact Information ................................................................................................................................... 15
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 3 of 15
BT-DOM J500 (H_L)
3. Ordering Information
The following Tables list the part No. for Memoright BT-DOM J500 (H_L) series SSDs.
Table 1 Industrial temperature product list
Part Number
Capacity
Flash Type
Form Factor
MRDSJ5I004GN203I01
4 GB*
SLC
SATA-DOM, Horizontal 270º
MRDSJ5I008GNP03I01
8 GB*
SLC
SATA-DOM, Horizontal 270º
MRDSJ5I016GNQ03I01
16 GB*
SLC
SATA-DOM, Horizontal 270º
* 1 GB=1,000,000,000 Bytes
M
em
or
ig
h
tc
on
fid
en
tia
l
For latest ordering information, please consult Memoright’s sales representatives or check on our website:
http://www.memoright.com
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 4 of 15
BT-DOM J500 (H_L)
3.1 Part Number Decoder
MR
1
DSJ5I
2
****
3
**
4
** I 01
5 6 7
MR: Memoright
DSJ5I: BT-DOM J500(H_L) Series
tia
l
01: Customized
en
Capacity
Temperature Option
I: Industrial (-40℃~85℃)
03: SATA DOM (Horizontal 270˚)
**: Flash Type: SLC
M
em
or
ig
h
tc
on
fid
008G: 4 GB
008G: 8 GB
008G: 16 GB
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 5 of 15
BT-DOM J500 (H_L)
4. General Description
The Memoright BT-DOM J500 (H_L) series SSD provides you ultimate performance and ultra-high
reliability over traditional hard disk drive by achieving up to 85 MB/s/ 80 MB/s sequential read/write
rate and integrated protection technologies such as bad block management, wear-leveling. The
above-mentioned features made Memoright BT-DOM J500 (H_L) series SSD the best solution for
various industrial applications.
For reliability, Memeoright BT-DOM J500 (H_L) series SSD integrates dynamic, static and active
(inactive) balanced wear leveling technology to ensure an equal usage of the Flash memory
cells to extend the SSD life time. Moreover, it provides features such as Enhanced ECC algorithm,
bad block management algorithm and MTBF>4,000,000 hours to assure overall reliability.
Physical Description
ig
h
4.1
tc
on
fid
en
tia
l
Memoright BT-DOM J500 (H_L) series SSD consists solely of semiconductor devices, which
means it doesn’t have any mechanical part such as platter (disk), motor and suspension as
traditional hard disk drive. Its characteristics such as high performance, capacity, reliability,
ruggedness, low power consumption and small form factor make it the best storage solution not
only for portable computing devices such as Tablet PC and UMPC but also for industrial application
with extreme environment and increased MTBF requirements.
M
em
or
The important component of Memoright BT-DOM J500 (H_L) SSD includes a Flash controller and
NAND Flash memory modules. The controller works with a host system to allow data to be written
to and read from the Flash memory modules through a (SATA) interface. The SSD is offered in a
SATA-DOM form factor with a SATA connector.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 6 of 15
BT-DOM J500(H_L)
4.2
System Performance
Table 1: System Performance Table
Unit
Data transfer Rate (SATA burst (3 Gb/s)
300
MB/s
Sustained Sequential Read Rate
4 GB
40
MB/s
Sustained Sequential Write Rate
4 GB
30
MB/s
4 KB Random Read IOPS
4 GB
4000
IOPS
4 KB Random Write IOPS
4 GB
10
IOPS
Sustained Sequential Read Rate
8 GB
80
MB/s
Sustained Sequential Write Rate
8 GB
55
MB/s
4 KB Random Read IOPS
8 GB
6,000
IOPS
4 KB Random Write IOPS
8 GB
20
IOPS
Sustained Sequential Read Rate
16 GB
Sustained Sequential Write Rate
16 GB
4 KB Random Read IOPS
16 GB
4 KB Random Write IOPS
16 GB
80
MB/s
6,000
IOPS
10
IOPS
fid
en
MB/s
on
Environmental Specifications
85
tc
4.3
l
Max.
tia
System Performance
4.3.1 Recommended Operating Conditions
ig
h
Table 2: Recommended Operating Conditions
Parameter
5V
em
Power Supply Voltage Range
or
Industrial Operating Temperature
Value
-40℃ to 85℃
M
4.3.2 Power Consumption (*)
Table 3: Power Consumption
Current/Power Consumption
Unit
Continue Read Power (Average)
5V
≦0.76
Continue Write Power (Average)
≦0.81
W
Idle Mode Power (Average)
≦0.58
W
Standby Mode Power (Average)
≦0.31
W
W
* All values are tested under room temperature 25℃ @ 5V. The power consumption may vary depends on different platform, OS, BIOS & test tools.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 7 of 15
BT-DOM J500(H_L)
4.3.3 Recommended Storage Conditions
Table 4: Recommended Storage Conditions
Parameter
Value
-55℃ to 95℃
Industrial Storage Temperature
4.3.4 Shock, Vibration and Humidity
Table 5: Shock, Vibration and Humidity
Parameter
Value
Humidity (non-condensing)
5%~95% (Operating)
Relative Humidity Gradient
30% per hour max
Vibration
10G(Peak,10~2000Hz)
50G, (11ms duration, half sine wave)
tia
l
Shock (Operating)
4.4
1500G, (0.5ms duration, half sine wave)
en
Shock (Non-Operating)
fid
Reliability
Table 6: Reliability
Value
> 4,000,000hours (Calculation mode: Telcordia
on
Parameter
Mean Time Between Failures (MTBF)
Data Retention
4.5
10 years
or
Physical Dimensions
ig
h
tc
SR-332 Issue 1 Method 1, Case 1)
em
Table 7 Physical Dimension
Length
Width
M
Physical Dimensions
Thickness
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Unit
30.3
mm
28
mm
1
mm
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 8 of 15
BT-DOM J500(H_L)
5. Physical Dimension Diagram (Horizontal Without Housing)
or
Length
Unit
30.3
mm
28
mm
1
mm
M
em
Width
Thickness
ig
h
Physical Dimensions
tc
on
fid
en
tia
l
Figure 1: Physical Dimension Diagram
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 9 of 15
BT-DOM J500(H_L)
6. Functional Block Diagram
M
em
or
ig
h
tc
on
fid
en
tia
l
Figure 2 Functional Block Diagram
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 10 of 15
BT-DOM J500(H_L)
7. Pin Assignment
7.1
Pin Assignment
Table 8 Pin Assignment and description for Signal and Power pins
Signal Name
Description
S1
GND
GND
S2
RX+
Differential Signal Pair A
S3
RX-
Differential Signal Pair A
S4
GND
GND
S5
TX-
Differential Signal Pair B
S6
TX+
Differential Signal Pair B
S7
GND
GND
fid
en
tia
l
Pin Name
on
S7
M
em
or
ig
h
tc
S1
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 11 of 15
BT-DOM J500(H_L)
8. Feature Descriptions
8.1
Wear Leveling
For extending SSD’s life time, a sophisticated wear leveling technology is important. Memoright
BT-DOM J500 (H_L) series provides dynamic, static (initiative) balanced wear leveling strategy.
The dynamic wear leveling algorithm ensures that erase/write cycles can be evenly distributed
across all flash memory block locations to prevent excessive writes to the same physical flash
memory location.
8.2
Bad Block Management
8.3
Endurance
8.4
ECC
8.5
Standards Compliance
en
tia
l
Memorigt BT-DOM J500 (H_L) series SSD provides bad block management function with a certain
number of reserved blocks. When a user data block fails, a reserved block will replace the failed
block. The replacement of bad block is transparent to user.
tc
on
fid
In normal operation condition, guarantees for 5 years product lifetime for half the SSD capacity
sequential write per day.
em
or
ig
h
The SSD provides Enhanced ECC algorithm which reduces error rate and enforces write
endurance at the same time. There are two kinds of ECC algorithm as follows.
BCH 16: it detects and corrects 16 random bits per 1024 Bytes.
BCH 24: it detects and corrects 24 random bits per 1024 Bytes.
M
Memoright BT-DOM J500 (H_L) SSD complies with following standards.
FCC
CE
RoHS
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 12 of 15
BT-DOM J500(H_L)
9. Mean Time Between Failure
The MTBF prediction results for various configurations. The analysis was performed using a RAM
Commander™ failure rate prediction.
‧Failure Rate: It is the total number of failures within an item population, divided by the total
number of life units expended by that population, during a particular measurement interval under
stated condition.
‧Mean Time between Failures (MTBF): A basic measure of reliability for repairable items: The
mean number of life units during which all parts of the item perform within their specified limits,
during a particular measurement interval under stated conditions.
tia
l
Reliability Test Conditions Reference Standards
Product Condition MTBF (Hours)
en
SATA DOM 7-pins 25°C
M
em
or
ig
h
tc
on
fid
SLC > 4,000,000
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 13 of 15
BT-DOM J500(H_L)
10.
Supported ATA Commands
Memoright BT-DOM J500 (H_L) series SSD supports ATA commends that is shown as following
table. For details of the ATA command, please refer to the Draft ATA-8 Standard.
Table 9 Supported ATA Commands
Support
E5H (98H)
Yes
Execute Device Diagnostic
90H
Yes
Format Track
(50H)
Yes
Identify Device
ECH
Yes
Idle
E3H (97H)
Yes
Idle immediate
E1H (95H)
Yes
Initialize Device Parameters
(91H)
Yes
NOP
00H
Read Buffer
E4H
Read Long Sector
(22H or 23H)
Read Multiple
C4H
Read Sector(s)
20H or 21H
Read Verify Sector
40H or 41H
Yes
Read DMA
C8H
Yes
(1XH)
Yes
70H
Yes
EFH
Yes
C6H
Yes
E6H (99H)
Yes
E2H (96H)
Yes
Standby Immediate
E0H (94H)
Yes
Write Buffer
E8H
Yes
Write Multiple
C5H
Yes
Write Sector
30H
Yes
Write DMA
CAH
Yes
Write Verify
(3CH)
Yes
Standby
en
on
fid
Yes
tc
M
Set Sleep Mode
em
Seek
Set Multiple Mode
Yes
ig
h
Recalibrate
Set Features
tia
Check Power Mode
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
l
Code
or
Command Name
Yes
Yes
Yes
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 14 of 15
BT-DOM J500(H_L)
11. Contact Information
Memoright Worldwide Headquarters
General Support
+886-2-2218-3789
Xindian Dist., New Taipei
Fax
+886-2-2218-5155
City 231, Taiwan
E-mail
support@memoright.com
on
fid
en
tia
l
9F, 535, Zhongzheng Rd,
tc
DISCLAIMER OF LIABILITY
Memoright Corp. reserves the right to make changes to specifications and product descriptions such as but not limited
ig
h
to numbers, parameters and other technical information contained herein without notice. Please contact Memoright
Corp. to obtain the latest specifications. Memoright Corp. grants no warranty with respect to this datasheet, explicit or
or
implied, and is not liable for direct or indirect damages. Some states do not grant the exclusion of incidental damages
em
and as such this statement may not be valid in such states. The provisions of the datasheet do not convey to the
others
M
purchaser of the device any license under any patent right or other intellectual property right of Memoright Corp. or
COPYRIGHT NOTICE
Copyright © 2012 by Memoright Corp. All rights reserved. Information contained in this document, including but not
limited to any instructions, descriptions and product specifications, is considered proprietary and confidential to
Memoright Corp. and shall not be modified, used, copied, reproduced or disclosed in whole or in part, in any form or by
any means, electronic or mechanical, for any purpose, without the written consent of Memoright Corp.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 15 of 15