tia
l
Commercial-Temp SATA DOM
en
BT-DOM J600
M
em
or
ig
h
tc
on
fid
SATAIII-6.0 Gb/s
Commercial Temperature Grade
SATA-DOM
Revision: V02
Memoright Corp.
Date:
October
2013Rd, Xin Dian Dist.,
9F,535,
Zhong Zheng
Memoright reserves the right to change products or specifications without notice.
Revision: V02
New Taipei City, Taiwan
Page 1 of 17
BT-DOM J600
Commercial-Temp SATA DOM Solid State Drive – BT-DOM J600 Series
8 GB~16 GB
1. Features
Form Factor

Available Capacities


Sustained Read Performance: up to 160 MB/s

Sustained Write Performance: up to 40 MB/s

Average Access Time: 0.2ms
Low Power Consumption


Supply Voltage 5V  5%
ECC


tia
Up to 600 MB/s burst transfer rate in SATAIII, 6 Gb/s
fid

on

High Performance
tc

MLC NAND Flash
en

l
Highly integrated controller for NAND Flash memory
ig
h

8~16 GB (MLC NAND Flash)
Built-in 40 bit EDC/ECC function
High Reliability
or

SATA-DOM Solid State Drive (SSD)

MTBF > 2,100,000 hours

Endurance: In normal operation condition, guarantees for 3 years product lifetime for half the SSD
em



M
capacity sequential write per day.

Dynamic, static and active balanced wear-leveling strategy

Bad-Block Management
Certificate

Fully Compliant with RoHS directive

CE and FCC compliant
Temperature Ranges

Commercial Temperature Range: 0℃ ~+70℃
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 2 of 17
BT-DOM J600
2. Contents
1.
Features...................................................................................................................................................... 2
2.
3.
Contents .................................................................................................................................................. 3
Ordering Information............................................................................................................................ 4
3.1 Part Number Decoder .......................................................................................................................... 5
General Description ............................................................................................................................. 6
Physical Description ................................................................................................................... 6
4.1
4.2
System Performance .................................................................................................................. 7
4.3
Environmental Specifications .................................................................................................... 8
4.4
Reliability ...................................................................................................................................... 9
4.5
Physical Dimensions................................................................................................................... 9
4.6
CHS Parameter ........................................................................................................................... 9
4.7
Drive Geometry............................................................................................................................ 9
5. Physical Dimension Diagram........................................................................................................... 10
(Vertical with Housing) .............................................................................................................................. 10
(Horizontal without Housing) ................................................................................................................... 11
6. Mean Time Between Failure (MTBF) .............................................................................................. 12
tc
on
fid
en
tia
l
4.
Functional Block Diagram ................................................................................................................ 13
Pin Assignment ................................................................................................................................... 14
8.1
Pin Assignment .......................................................................................................................... 14
9. Feature Descriptions .......................................................................................................................... 15
9.1
Wear Leveling ............................................................................................................................ 15
9.2
Bad Block Management ........................................................................................................... 15
9.3
Endurance .................................................................................................................................. 15
9.4
ECC ............................................................................................................................................. 15
9.5
Standards Compliance ............................................................................................................. 15
10.
Supported ATA Commands .............................................................................................................. 16
11. Contact Information ................................................................................................................................... 17
M
em
or
ig
h
7.
8.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 3 of 17
BT-DOM J600
3. Ordering Information
The following Tables list the part No. for Memoright BT-DOM J600 series SATA-DOM SSDs.
Table 1: Commercial temperature (Vertical) product list
Part Number
Capacity
Flash Type
Form Factor
MRDSJCA008GK101C00
8 GB*
MLC
7 pin , Vertical
MRDSJCA008GTT01C00
8 GB*
MLC
7 pin , Vertical
MRDSJCA016GK201C00
16 GB*
MLC
7 pin , Vertical
MRDSJCA016GTW01C00
16 GB*
MLC
7 pin , Vertical
tia
l
Table 2 Commercial temperature (Horizontal,270°) product list
Capacity
Flash Type
Form Factor
MRDSJCA008GK103C00
8 GB*
MLC
7 pin, Horizontal
MRDSJCA008GTT03C00
8 GB*
MLC
7 pin, Horizontal
MRDSJCA016GK203C00
16 GB*
MRDSJCA016GTW03C00
16 GB*
fid
on
MLC
7 pin, Horizontal
MLC
7 pin, Horizontal
tc
* 1 GB=1,000,000,000 Bytes
en
Part Number
M
em
or
ig
h
For latest ordering information, please consult Memoright’s sales representatives or check on our website:
http://www.memoright.comMRDSJCA016GK203C00
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 4 of 17
BT-DOM J600
3.1 Part Number Decoder
MR DS JCA ****
1
2
3
** 0* * 00
4
5 6 7
MR: Memoright
DSJCA: BT-DOM J600 Series
tia
l
00: Standard
en
Capacity
Temperature Option
C: Commercial (0℃~70℃)
01: SATA DOM (Vertical)
03: SATA DOM (Horizontal)
**: Flash Type: MLC
M
em
or
ig
h
tc
on
fid
008G: 8 GB
016G: 16 GB
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 5 of 17
BT-DOM J600
4. General Description
The Memoright BT-DOM J600 series SSD provides you ultimate performance and ultra-high
reliability over traditional hard disk drive by achieving up to 160 MB/s/40 MB/s sequential read/write
rate and integrated protection technologies such as bad block management, wear-leveling. The
above-mentioned features made Memoright BT-DOM J600 series SSD the best solution for various
industrial applications.
For reliability, Memeoright BT-DOM J600 series SSD integrates dynamic, static and active
(inactive) balanced wear leveling technology to ensure an equal usage of the Flash memory
cells to extend the SSD life time. Moreover, it provides features such as Enhanced ECC algorithm,
bad block management algorithm and MTBF>2,100,000 hours to assure overall reliability.
Physical Description
tc
4.1
on
fid
en
tia
l
Memoright BT-DOM J600 series SSD consists solely of semiconductor devices, which means it
doesn’t have any mechanical part such as platter (disk), motor and suspension as traditional hard
disk drive. Its characteristics such as high performance, capacity, reliability, ruggedness, low power
consumption and small form factor make it the best storage solution for industrial application with
extreme environment and increased MTBF requirements.
M
em
or
ig
h
The important component of Memoright BT-DOM J600 SSD includes a Flash controller and NAND
Flash memory modules. The controller works with a host system to allow data to be written to and
read from the Flash memory modules through a (SATA) interface. The SSD is offered in a
SATA-DOM form factor with a SATA connector.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 6 of 17
BT-DOM J600
4.2
System Performance
Table 3: System Performance Table
Unit
Data transfer Rate (SATA burst (6 Gb/s)
600
MB/s
Sustained Sequential Read Rate
8 GB
130
MB/s
Sustained Sequential Write Rate
8 GB
20
MB/s
4KB Random Read IOPS
8 GB
6900
IOPS
4KB Random Write IOPS
8 GB
3
IOPS
Sustained Sequential Read Rate
16 GB
160
MB/s
Sustained Sequential Write Rate
16 GB
40
MB/s
4KB Random Read IOPS
16 GB
6900
IOPS
4KB Random Write IOPS
16 GB
3
IOPS
l
Max.
tia
System Performance
M
em
or
ig
h
tc
on
fid
en
*1 GB=1,000,000,000 Bytes
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 7 of 17
BT-DOM J600
4.3
Environmental Specifications
4.3.1 Recommended Operating Conditions
Table 4: Recommended Operating Conditions
Parameter
Commercial Operating Temperature
Value
0℃ to 70℃
Power Supply Voltage Range
5V
4.3.2 Power Consumption (*)
Table 5: Power Consumption
Unit
Continue Read Power (Average)
5V
<0.63
Continue Write Power (Average)
<0.62
W
Idle Mode Power (Average)
<0.40
Standby Mode Power (Average)
<0.40
tia
l
W
en
Current/Power Consumption
W
W
Commercial Storage Temperature
ig
h
Parameter
tc
Table 6: Recommended Storage Conditions
on
4.3.3 Recommended Storage Conditions
fid
* All values are tested under room temperature 25℃ @ 5V. The power consumption may vary depends on different platform, OS, BIOS & test tools.
Value
-40℃ to 85℃
em
Table 7: Shock, Vibration and Humidity
or
4.3.4 Shock, Vibration and Humidity
Parameter
Value
5%~95% (Operating)
Relative Humidity Gradient
30% per hour max
M
Humidity (non-condensing)
Vibration
Shock (Operating)
Shock (Non-Operating)
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
10G (Peak,10-2000Hz)
50G (11ms duration, half sine wave)
1500G (0.5ms duration, half sine wave)
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 8 of 17
BT-DOM J600
4.4
Reliability
Table 8: Reliability
Parameter
Value
> 2,100,000hours (Calculation mode: Telcordia
Mean Time Between Failures (MTBF)
SR-332 Issue 1 Method 1, Case 1)
Data Retention
4.5
10 years
Physical Dimensions
Table 9 Physical Dimension (Vertical)
Physical Dimensions
Unit
38.25
mm
Width
21.9
mm
fid
Table 10 Physical Dimension (Horizontal)
Physical Dimensions
Width
mm
18.3
mm
1
mm
or
Guaranteed Sectors
M
16 GB*
em
Unformatted Capacity
8 GB*
30.7
ig
h
tc
Thickness
CHS Parameter
mm
Unit
on
Length
4.6
tia
8
en
Thickness
l
Length
Bytes per Sector
1564920
512
31277232
512
*1GB=1,000,000,000 Bytes
4.7
Drive Geometry
Capacity
Default Cylinders
Default Heads
Default Sectors
8 GB*
15525
16
63
16 GB*
31029
16
63
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 9 of 17
BT-DOM J600
5. Physical Dimension Diagram
(Vertical with Housing)
em
or
ig
h
tc
on
fid
en
tia
l
Figure 1: Physical Dimension Diagram
Length
Width
M
Physical Dimensions
Thickness
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Unit
38.25
mm
21.9
mm
8
mm
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 10 of 17
BT-DOM J600
Physical Dimensions
Unit
30.7
mm
18.3
mm
1
mm
M
Thickness
em
Width
or
Length
ig
h
tc
on
fid
en
tia
l
(Horizontal without Housing)
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 11 of 17
BT-DOM J600
6. Mean Time Between Failure (MTBF)
The MTBF prediction results for various SATA DOM configurations. The analysis was performed using a RAM
Commander™ failure rate prediction.
Failure Rate: The total number of failures within an item population, divided by the total number of life units
expended by that population, during a particular measurement interval under stated condition.
Mean Time between Failures (MTBF): A basic measure of reliability for repairable items: The mean number of
life units during which all parts of the item perform within their specified limits, during a particular
tia
l
measurement interval under stated conditions.
Reliability Test Conditions Reference Standards
en
Product Condition MTBF (Hours)
SATA DOM 7-pins 25°C
M
em
or
ig
h
tc
on
fid
MLC > 2,100,000
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 12 of 17
BT-DOM J600
7. Functional Block Diagram
Figure 2 Functional Block Diagram
SATA III I/F
Flash Controller 1 & ECC Engine
SATA Controller
Bus
en
tia
Flash I/F
CPU
fid
Chip
Configuration
Mask RAM
Program RAM
Chip Config.
M
em
or
ig
h
GPIO
tc
on
GPIO
DATA RAM
XTALI
Flash Controller 2 & ECC Engine
SATA III PHY
l
Flash I/F
BT-DOM J600 Functional Block Diagram
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 13 of 17
BT-DOM J600
8. Pin Assignment
8.1
Pin Assignment
Table 11 Pin Assignment and description for Signal and Power pins
Signal Name
Description
S1
GND
GND
S2
RX+
Differential Signal Pair A
S3
RX-
Differential Signal Pair A
S4
GND
GND
S5
TX-
Differential Signal Pair B
S6
TX+
Differential Signal Pair B
S7
GND
GND
fid
en
tia
l
Pin Name
on
S7
M
em
or
ig
h
tc
S1
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 14 of 17
BT-DOM J600
9. Feature Descriptions
9.1
Wear Leveling
For extending SSD’s life time, a sophisticated wear leveling technology is important. Memoright
BT-DOM J600 series provides dynamic, static (initiative) balanced wear leveling strategy. The
dynamic wear leveling algorithm ensures that erase/write cycles can be evenly distributed across
all flash memory block locations to prevent excessive writes to the same physical flash memory
location.
9.2
Bad Block Management
9.3
Endurance
9.4
ECC
9.5
Standards Compliance
en
tia
l
Memorigt BT-DOM J600 series SSD provides bad block management function with a certain
number of reserved blocks. When a user data block fails, a reserved block will replace the failed
block. The replacement of bad block is transparent to user.
tc
on
fid
In normal operation condition, guarantees for 3 years product lifetime for half the SSD capacity
sequential write per day.
em
or
ig
h
The SSD provides Enhanced ECC algorithm which reduces error rate and enforces write
endurance at the same time. There are two kinds of ECC algorithm as follows.
BCH 40: it detects and corrects 40 random bits per 1024 Bytes.
M
Memoright BT-DOM J600 SSD complies with following standards.
FCC
CE
RoHS
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 15 of 17
BT-DOM J600
10.
Supported ATA Commands
Memoright BT-DOM J600 series SSD supports ATA commends that is shown as following table.
For details of the ATA command, please refer to the Draft ATA-8 Standard.
Table 12 Supported ATA Commands
Support
E5H (98H)
Yes
Execute Device Diagnostic
90H
Yes
Format Track
(50H)
Yes
Identify Device
ECH
Yes
Idle
E3H (97H)
Yes
Idle immediate
E1H (95H)
Yes
Initialize Device Parameters
(91H)
Yes
NOP
00H
Yes
Read Buffer
E4H
Read Long Sector
(22H or 23H)
Read Multiple
C4H
Read Sector(s)
20H or 21H
Read Verify Sector
40H or 41H
Yes
Read DMA
C8H
Yes
(1XH)
Yes
70H
Yes
EFH
Yes
C6H
Yes
E6H (99H)
Yes
E2H (96H)
Yes
Standby Immediate
E0H (94H)
Yes
Write Buffer
E8H
Yes
Write Multiple
C5H
Yes
Write Sector
30H
Yes
Write DMA
CAH
Yes
Write Verify
(3CH)
Yes
Standby
en
fid
on
tc
M
Set Sleep Mode
em
Seek
Set Multiple Mode
Yes
ig
h
Recalibrate
Set Features
tia
Check Power Mode
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
l
Code
or
Command Name
Yes
Yes
Yes
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 16 of 17
BT-DOM J600
11. Contact Information
Memoright Worldwide Headquarters
General Support
+886-2-2218-3789
Xindian Dist., New Taipei
Fax
+886-2-2218-5155
City 231, Taiwan
E-mail
support@memoright.com
on
fid
en
tia
l
9F, 535, Zhongzheng Rd,
tc
DISCLAIMER OF LIABILITY
Memoright Corp. reserves the right to make changes to specifications and product descriptions such as but not limited
ig
h
to numbers, parameters and other technical information contained herein without notice. Please contact Memoright
Corp. to obtain the latest specifications. Memoright Corp. grants no warranty with respect to this datasheet, explicit or
or
implied, and is not liable for direct or indirect damages. Some states do not grant the exclusion of incidental damages
em
and as such this statement may not be valid in such states. The provisions of the datasheet do not convey to the
others
M
purchaser of the device any license under any patent right or other intellectual property right of Memoright Corp. or
COPYRIGHT NOTICE
Copyright © 2012 by Memoright Corp. All rights reserved. Information contained in this document, including but not
limited to any instructions, descriptions and product specifications, is considered proprietary and confidential to
Memoright Corp. and shall not be modified, used, copied, reproduced or disclosed in whole or in part, in any form or by
any means, electronic or mechanical, for any purpose, without the written consent of Memoright Corp.
Memoright Corp.
9F,535, Zhong Zheng Rd, Xin Dian Dist.,
New Taipei City, Taiwan
Memoright reserves the right to change products or specifications without notice.
Revision: V02
Page 17 of 17