mini excavator | 16c-1/18z-1/19c-1

MINI EXCAVATOR | 16C-1/18Z-1/19C-1
Transport weight: 1755-1868kg
Net engine power: 10.8kW
CHOOSE TOUGH.
100% steel bodywork that withstands
knocks but is cost effective to repair.
THE NEW GENERATION JCB MINI EXCAVATORS HAVE BEEN DESIGNED AND
BUILT TO WITHSTAND THE TOUGHEST OF JOB SITES. WITH LONG-LASTING
COMPONENTS AND EASY, COST EFFECTIVE REPAIRS, THEY PROVIDE
MINIMUM DOWNTIME AND MAXIMUM PROFITS.
Designed to last.
1 Full width rear cast counterweight gives full
protection against site damage.
All hydraulic components are assembled within a
hydraulic clean room and go through multi-stage hot
tests and oil detection processes to ensure reliability.
1
Improved dig end pins with ARCO coating protects
pins against corrosion, helping towards reduced cost
of ownership.
2 State of the art manufacturing processes to achieve
ultimate build quality, reliability, durability, service life and
machine uptime. Our in-house paint process is a case in
point, guaranteeing quality and lasting protection.
2
1
3
4
3 The standard heavy-duty kingpost optimises
service life and lowers the cost of ownership due to
the durable re-bushable pivots.
4 The top mounted boom ram reduces the risk of
damage on site, for instance when loading dumpers.
5
Hoses are routed through the boom, dipper and
kingpost for ultimate durability. All three models use
O-ring faced seal hydraulics which provides excellent
sealing capabilities.
4
16C-1/18Z-1/19C-1 MINI EXCAVATOR
5
CHOOSE TOUGH
Strong and durable.
6
The 18Z is JCB’s first zero tailswing model within
its class, it protects the machine and surrounding
environment from accidental damage.
7 Solid cast rear door for maximum impact
resistance compared to glass reinforced plastic.
8 Three single flanged bottom rollers allied with
short pitch tracks ensures a smooth ride. Long pitch
rubber or steel tracks are optional for more
arduous applications.
9
The strong, durable H frame undercarriage provides
rigid support with an open design allowing spoil to fall
readily preventing excessive componentry wear.
For ultimate rigidity, the extending undercarriage
beams are constructed from 25mm solid steel plate.
6
8
9
7
16C-1/18Z-1/19C-1 MINI EXCAVATOR
5
All new valve block, spools and floor controls
allow for fine control and smooth operation
for even the less experienced operator,
increasing productivity.
CHOOSE EASY.
MOST JOBS ARE HARD ENOUGH
WITHOUT THE ADDED STRESS OF
DIFFICULT AND FREQUENT SERVICING,
HARD TO REACH CLEANING AND OF
COURSE UNCOMFORTABLE OPERATING
CONDITIONS. THAT’S WHY WE’VE JUST
MADE THEM EASY.
1
1
Making life easy.
1
Easy pre-start checks allows you to check fluid
oil levels whilst an analogue hour meter gives you
quick and easy viewing without having to turn the
machine on.
Standard two speed tracking is operated by a button
on the dozer. Auto kick down is standard on the
19C-1 and optional on the 16C-1 and 18Z-1.
2 New right hand positioned panel with
easy button functions, easy to read indicators and
warnings allow the operator to always be aware
of the machines status as well as potential risks.
3
Electro proportional control as standard on
the 19C-1 enables new finer control through
an auxiliary thumb switch to allow for precision
control of attachments.
6
16C-1/18Z-1/19C-1 MINI EXCAVATOR
1
2
3
CHOOSE EASY
Supporting productivity.
4
180° opening bi-fold service door to access all
cleaning and maintenance points with a separate,
daily checks door.
5 Our hydraulic system allows you to travel in a
straight line at the same time as selecting excavator
functions, increasing productivity.
6
Spacious cab with large door entry, excellent
visibility and intuitive controls. 24% bigger than the
previous model. Easily accessible external lockable
fuel tank provides extra security.
4
5
6
16C-1/18Z-1/19C-1 MINI EXCAVATOR
7
CHOOSE SIMPLE.
DESIGNED TO SIMPLY GET ON WITH WORKING,
THE NEW GENERATION MINIS ARE ALL DESIGNED
WITH YOUR PROFITS IN MIND. WITH A SIMPLE,
CLASSIC DESIGN, LOW COST MAINTENANCE AND
EASY REPAIRS EQUALS MACHINES TAILORED TO
YOUR NEEDS, WHY CHOOSE ANYTHING ELSE?
Bucket rotation is a huge 201°, offering great
spoil retention during truck loading, providing
total versatility. Dipper lengths are 950mm,
1100mm and 1344mm.
User-friendly environment.
1
Large glass area gives increased visibility. 70/30
split line and clear joining split gives perfect visibility
down to the dozer blade.
1
2 Flat glass which is easier to replace and
more cost effective than curved options, with
the added benefit of sun reflecting tinted glass
for operator comfort.
3
The 19C-1 boasts new Instrumentation with
an integrated membrane switch immobiliser pad.
4 Improved 2 speed heater with three multipositioned vents for ultimate operator comfort.
8
16C-1/18Z-1/19C-1 MINI EXCAVATOR
2
3
4
CHOOSE SIMPLE
Ultimate convenience.
5
Graphite impregnated bushes with industries
lowest greasing intervals of 500 hours, means no
need for daily greasing.
6 Hydraulic connections reduced along with
increased straight hoses and combined control
valves; all deliver improved hydraulic efficiency
and reduced component complexity.
7
Reduced minimum front swing radius for a
compact machine that can tuck up to work in the
tightest of conditions without compromise to load
over height.
Premium or rental specifications to help choose the
right machine. Zero tailswing or Conventional
tailswing plus cab or canopy options across the range.
7
5
6
16C-1/18Z-1/19C-1 MINI EXCAVATOR
9
CHOOSE QUICK.
WHEN TIME IS MONEY AND GETTING FROM THE
LAST JOB TO THE NEXT JOB QUICKER IS A HUGE
ADVANTAGE, THE NEW GENERATION MINIS DON’T
HANG ABOUT. QUICK CLEANING, TRANSPORTING
AND ATTACHMENT CHANGES ALL ADD UP TO
BIGGER PROFITS FOR YOU.
1
Ultimate versatility.
1 Industry standard bucket centres and pin sizes
(30mm) for maximum attachment versatility.
2 Factory ready hydraulic quick hitch circuit on the
19C-1 allows the operator to switch between
attachments quickly and safely.
3
Choose from JCB’s range of specially designed
attachments. They provide ultimate performance,
full JCB warranty compliance, and optimum fit and
operation. Dual hydraulic flow is available as an option.
10
16C-1/18Z-1/19C-1 MINI EXCAVATOR
2
3
3
Low cost of ownership.
4
New dig end geometry allows the machines
to load dumpers without the need to re-position
speeding up arduous jobs on site.
8
With low operating weights, the 16C-1, 18Z-1
and 19C-1 can be easily towed to wherever
they’re needed.
5 Sloping undercarriage track legs gives minimal soil
retention and enables fast cleaning.
9 10 tie down and lifting points ensure compliant,
speedy machine transportation.
6 The new dozer geometry allows the blade to
become free of material build up. With easy to use
swing out dozer wing extensions, there’s no need for
any tools for operation.
7 No daily greasing with easy to access maintenance
and cleaning means quicker turnaround times.
7
4
9
9
9
5
6
8
9
9
16C-1/18Z-1/19C-1 MINI EXCAVATOR
11
SAFE & SECURE.
WORKING QUICKER IS ALSO ABOUT WORKING
SMARTER. AS WORKING CONDITIONS BECOME
MORE AND MORE RESTRICTED, SAFETY BECOMES
MORE AND MORE IMPORTANT. JCB HAS ALWAYS
BEEN AT THE FOREFRONT OF SITE SAFETY AND
PROVIDES INNOVATIVE WAYS TO IMPROVE IT.
1
Work smart.
1 The new cabs are fully ROPS and FOPS
compliant, for increased protection laminated glass
is available as an option.
1
2
All services, including tracking and dozer, are
isolated when the control pod is raised as an
additional safety precautionary measure.
3 Lift overload audible warning system on the
19C-1 ensures maximum stability and safety when
working efficiently.
4
A lockable internal toolbox provides safe tool
stowage on all models.
Optional operator presence and seat belt isolation
switches for increased on site safety.
12
16C-1/18Z-1/19C-1 MINI EXCAVATOR
2
3
4
SAFE & SECURE
Optional green beacon warning light and high
visibility seatbelts available to those wishing to
increase on-site safety measures.
Safely does it.
4
Optimum seat position with large glass area and
bodywork design combine to give excellent all round
visibility for increased on site safety. As a result, the
16C-1, 18Z-1 and 19C-1 do not require mirrors to
meet EU regulations.
5 JCB’s unique 2GO system gives an additional
layer of safety meaning all controls are fully isolated
unless the 2GO button is activated.
4
For increased safety, there is a Thatcham approved
immobiliser*, eliminating the possibility of an
unauthorised start. Having the software system
Livelink and Datatag* on the minis, will allow you to
set a geofence and machine working restrictions.
A key benefit of the Livelink and immobiliser
combination is the remote pin code management
system, which allows you to remotely authorise or
deny the usage of the machine. Up to 14 individual
pin codes can be programmed into the system,
offering the option to customise operator
preferences by embedding a separate auxiliary
mode in each code (19C-1 only).
5
* Region specific.
5
16C-1/18Z-1/19C-1 MINI EXCAVATOR
13
LIVELINK, WORK SMARTER.
LIVELINK IS AN INNOVATIVE SOFTWARE
SYSTEM THAT LETS YOU MANAGE JCB
MACHINES REMOTELY – ONLINE, BY
EMAIL OR BY MOBILE PHONE. ACCESS
EVERYTHING FROM MACHINE ALERTS
TO HISTORY INFORMATION, WITH ALL
DATA STORED AT A SECURE CENTRE.
Productivity and
cost benefits
By providing information like
machine location, Livelink can
help improve efficiency and
perhaps even reduce
insurance costs.
Maintenance benefits
Security benefits
Manage machine maintenance easily –
accurate hours monitoring and service alerts
improve maintenance planning, while
real-time location data helps you manage
your fleet. Critical machine alerts and
maintenance history records are also available.
Livelink’s real-time geofencing alerts tell you
when machines move out of predetermined
zones, and real-time curfew alerts inform you
of unauthorised usage. Further benefits include
real-time location information, advanced ECU
matching (pairs Livelink with the immobiliser or
ECU), and PIN code management (to remotely
authorise usage – perfect for plant hire).
14
16C-1/18Z-1/19C-1 MINI EXCAVATOR
VALUE ADDED.
JCB’S WORLDWIDE CUSTOMER SUPPORT IS FIRST CLASS.
WHATEVER YOU NEED AND WHEREVER YOU ARE, WE’LL BE
AVAILABLE QUICKLY AND EFFICIENTLY TO HELP MAKE SURE
YOUR MACHINERY IS PERFORMING TO ITS FULL POTENTIAL.
1
1 Our Technical Support Service provides instant
access to factory expertise, day or night, while our
Finance and Insurance teams are always on hand to
provide fast, flexible, competitive quotes.
2
The global network of JCB Parts Centres is
another model of efficiency; with 16 regional bases,
we can deliver around 95% of all parts anywhere in
the world within 24 hours. Our genuine JCB parts
are designed to work in perfect harmony with your
machine for optimum performance and productivity.
2
3
3 JCB Assetcare offers comprehensive extended
warranties and service agreements, as well as
service-only or repair and maintenance contracts.
Irrespective of what you opt for, our maintenance
teams around the world charge competitive labour
rates, and offer non-obligation quotations as well as
fast, efficient insurance repair work.
Manufacturing Facilities
Dealers
Parts Distribution Centres
Note: JCB LIVELINK and JCB ASSETCARE may not be available in your region, so please check with your local dealer.
16C-1/18Z-1/19C-1 MINI EXCAVATOR
15
SPECIFICATION
16C-1/18Z-1/19C-1 MINI EXCAVATOR
STATIC DIMENSIONS
ENGINE
16C-1, 18Z-1, 19C-1
Machine model
E
F
Model
403D-07
Fuel
Diesel
Cooling
G
Water cooled
Gross power ISO 14396
kW
11.7 @ 2550 rpm
Net power
kW
10.8 @ 2550 rpm
Max. torque ISO 14396
Nm
45.6 @ 2000 rpm
Displacement
L
H
M
D
Gradeability
cc
762
degrees
35°
Starter motor
I
A
J
B
kW
Battery
Alternator
C
1.2
volt / amps
12V / 65AH
amps (aircon)
60
K
Machine model
A
16C-1
18Z-1
19C-1
UNDERCARRIAGE
Machine model
Sprocket idler centres
mm
1218
1218
1218
B
Track length on ground
mm
1220
1220
1220
C
Undercarriage overall length - rubber
mm
1578
1578
1578
No. of bottom rollers
Undercarriage overall length - steel
mm
1578
1578
1578
Track width rubber
18Z-1
19C-1
Retractable
Retractable
16C-1
Fixed
Optional
Retractable
mm
3
3
3
230
230
230
D
Kingpost clearance
mm
409
409
409
Track width steel
230
230
230
E
Tailswing radius
mm
1103
685
1103
Track tensioning (rubber)
kg/cm2
15-25
15-25
15-25
F
Overall width of superstructure
mm
996
996
996
Track tensioning (steel)
kg/cm2
25-40
25-40
25-40
G
Height over cab
mm
2324
N/A
2324
Travel speed – low
kph
2.4
2.4
2.4
Height over canopy
mm
2342
2340
2342
Travel speed – high
kph
4.1
4.1
4.1
H
Ground clearance
mm
162
162
162
Tractive effort
kN
13.2
13.2
13.2
I
Track gauge - retracted/extended
mm
750-1110
750-1110
750-1110
J
Width over tracks / rubber / steel - retracted
mm
980
980
980
HYDRAULIC SYSTEM
Width over tracks / rubber / steel - extended
mm
1330
1330
1330
Machine model
K
Transport length
mm
3860
3547
3862
Pump
L
Track height
mm
367
367
367
M
Counterweight clearance
mm
434
434
434
mm
16C-1
18Z-1
19C-1
cc
18
18
18
Nominal output @ 2000rpm
lpm
36
36
36
Excavator/track main relief pressure
bar
235
235
235
Slew main relief pressure
bar
167
167
167
Auxiliary hydraulic pressure (Aux 1)
bar
200
200
200
Auxiliary hydraulic pressure (Aux 2)
bar
N/A
N/A
200
Auxiliary hydraulic flow (Aux 1)
lpm
32
32
32
Auxiliary hydraulic flow (Aux 2)
lpm
N/A
N/A
32
Piston
Piston
Piston
Hydraulic pump
16C-1/18Z-1/19C-1 MINI EXCAVATOR
WEIGHTS
WORKING RANGE
Machine model
16C-1
18Z-1
19C-1
Canopy
Cab
Canopy
Canopy
Cab
A
B
Operating weight*
kg
1830
1910
1749
1863
1943
FOPS (Falling Object Protective Structure) guard
kg
N/A
15
N/A
N/A
15
5
Steel tracks
kg
81
81
81
81
81
4
Long dozer
kg
9
9
9
9
9
Mechanical quickhitch
kg
14
14
14
14
14
Hydraulic quickhitch (without hoses)
kg
N/A
N/A
N/A
24
24
Gravemaster dipper
kg
N/A
N/A
N/A
5
5
Shipping weight**
kg
1736
1816
1655
1769
1849
Ground bearing pressure (rubber tracks)
kg/cm²
0.35
0.36
0.33
0.36
0.37
Ground bearing pressure (steel tracks)
kg/cm²
0.36
0.38
0.35
0.38
0.39
kg
1755
1835
1674
1788
1868
Transport weight (operator weight - 75kg)
H
D
F
2
E
1
0
-1
C G
-2
16C-1
18Z-1
ltr
20.5
20.5
20.5
Engine coolant
ltr
Canopy model: 4.2
Cab model: 4.7
Canopy model: 4.2
Canopy model: 4.2
Cab model: 4.7
Engine oil
ltr
2.5
2.5
2.5
Hydraulic system
ltr
28
28
28
Hydraulic tank
ltr
15
15
15
5
4
3
2
1
0
-1
-2
19C-1
OPERATOR ENVIRONMENT
16C-1
18Z-1
19C-1
Cab/canopy height
mm
2330 / 2347
2346
2330 / 2347
Cab/canopy height with FOGS guard LEVEL 1
mm
2349 / 2347
2346
2349 / 2347
Cab/canopy length with FOGS guard LEVEL 1
mm
1236 / 1427
1107
1236 / 1427
Cab/canopy length
mm
1202 / 1427
1107
1202 / 1427
Cab/canopy width
mm
976 / 978
978
976 / 978
Machine model
DOZER
Machine model
16C-1
18Z-1
19C-1
Dozer length (STD) centre of boss
mm
787
787
787
Max. height above ground
mm
239
239
239
Dig depth below ground
Approach angle
mm
225
225
225
degrees
25.3
25.3
25.3
Width (without wings)
mm
980
980
980
Width (with wings)
mm
1340
1340
1340
Height
mm
234
234
234
I
J
-3
SERVICE CAPACITIES
Machine model
H
3
*Operator weight to ISO 6016 including cab/canopy, rubber tracks, 950 dipper (16C-1 & 18Z-1), 1100 dipper (19C-1), 300mm bucket, full
tanks and a 75kg operator. **Shipping weight to ISO 6016 is mass of the base machine without operator, with fuel level at 10% of tank capacity.
Fuel tank
SPECIFICATION
Metres
16C-1 / 18Z-1 / 19C-1
(950mm Dipper)
16C-1 / 18Z-1 / 19C-1
(1100mm Dipper)
19C-1
(1344mm Gravemaster Dipper)
Boom length
mm
1800
1800
1800
A
Max. digging reach
mm
3899
4043
4247
B
Max. digging reach on ground
mm
3834
3981
4220
C
Max. digging depth – dozer up
mm
2271
2421
2665
Max. digging depth – dozer down
mm
2426
2576
2819
D
Max. digging height
mm
3556
3667
3847
E
Max. dump/load-over height
mm
2598
2637
2818
F
Max. height to dipper nose pivot pin
mm
3116
3154
3335
G
Max. vertical wallcut depth
mm
2438
2534
2518
H
Min. front swing radius (no offset)
mm
1488
1517
1565
Min. front swing radius (fully offset)
mm
1171
1196
1236
75°
I
Boom swing left
degrees
75°
75°
J
Boom swing right
degrees
55°
55°
55°
Bucket rotation
degrees
201°
201°
201°
Dipper rotation
degrees
126°
126°
126°
Bucket tearout (power position)
kN
18
18
18
Dipper tearout
kN
10.1
9.1
7.9
rpm
7.9
7.9
7.9
Slew speed
SPECIFICATION
16C-1/18Z-1/19C-1 MINI EXCAVATOR
EQUIPMENT
Machine model
16C-1
18Z-1
19C-1
SERVICE AND MAINTENANCE
Beacon ready kit
Single element air cleaner
500 hours dig end greasing intervals
Grease gun & cartridge
Toolkit
Machine model
•
•
•
+
+
•
•
•
+
+
Automatic glow plug
•
•
•
+
+
+
ROPS & TOPS certified canopy
Internal lockable toolbox
Protected boom work light
2GO hydraulic isolation
Cesar Data Tag (UK ONLY)
Battery isolator (Europe)
Rotating beacon
TRACKS AND UNDERCARRIAGE
230mm short pitch rubber tracks
Two speed tracking
Retractable undercarriage
Extendable dozer blade
Seat belt engaged green beacon
•
•
•
•
•
•
•
•
Auto kick down track motors
Heavy duty recoiled tracked tensioners
230mm long pitch rubber tracks
230mm steel tracks
Long dozer blade
Auto kick down track motors
•
+
+
+
+
•
+
+
+
+
•
•
•
•
•
•
+
+
+
Full control isolation
12 volt power socket
ISO servo controls
Static seat
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
+
•
•
•
•
•
•
+
Electro-proportional thumb controlled dual flow auxilary
Dual pattened controls (ISO/SAE changeover)
Fabric suspension seat
Vinyl suspension seats
LED interior lights
Sunblind
Fire extinguisher
Track lever pedals
Full radio kit
+
+
+
+
•
•
•
•
•
+
+
+
+
+
+
+
+
+
HYDRAULICS
Hydraulic slew travel lock
Single acting auxillary circuit
Variable displacement pump
Straight line travel circuit
ORFS hydraulics
Quick release auxillary couplers
Double acting auxilaries
Auxiliary vent
LiveLink
Pin pad immobiliser
Key immobiliser
Polycarbonate front screen protection
Boom LED worklight & guard
FOGS guard kit level 1
White noise travel alarm
18Z-1
19C-1
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
+
+
+
+
•
•
•
•
•
•
+
+
+
+
+
+
EXTERNAL EQUIPMENT
•
•
•
Standard dipper (mm)
950
950
1100
Tie down points
•
+
+
•
+
•
+
+
Dipper options (mm)
1100
1100
950/1344
Halogen work lights
+
•
+
+
+
+
•
+
+
+
+
+
+
•
+
+
+
+
+
Lifting points
OPERATOR STATION
Full audio visual warning systems
16C-1
PROTECTION AND SAFETY
ROPS & TOPS fully glazed cab with steel or glass lower door
LED beacon
Heavy duty kingpost
Exterior mirrors
Full bucket range
Mechanical quick hitch
Hydraulic quick hitch
Thumb ready dipper
STANDARD
OPTIONAL •
+
SPECIFICATION
16C-1/18Z-1/19C-1 MINI EXCAVATOR
LIFT CAPACITIES – 230MM RUBBER TRACKS, 1800MM BOOM, 950MM DIPPER, NO BUCKET.
Load Point
1.5m
16C-1
2.0m
2.5m
3.0m
Capacity at maximum reach
Height
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
m
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
mm
401*
270
404*
420*
401*
270
404*
420*
2500
2.5
2.0
1.5
Distance
372*
363*
376*
396*
404*
224
392*
412*
404*
224
392*
412*
3000
465
439*
479*
506*
432*
278
445*
460*
398*
211
397*
417*
367*
188
371*
394*
3250
1.0
942*
496
952*
987*
698
380
694*
732*
522*
280
524*
550*
430*
228
430*
451*
296
187
316
396*
3400
0.5
718*
443
766
985*
599
348
617
806*
437
275
443
585*
343
214
363
460*
286
191
303
378*
3300
0
840*
463
902*
885*
573
349
581
753*
435
269
449
586*
346
215
346
437*
346*
189
361*
363*
3300
-0.5
856*
410
799*
820*
642
306
606*
634*
505*
258
452*
463*
385*
204
345*
345*
323*
197
313*
318*
3250
-1.0
616*
403
668*
668*
509
302
518*
518*
383*
251
372*
372*
296*
231
295*
294*
2900
403*
298
413*
308*
330*
252*
338*
252*
2230
-1.5
LIFT CAPACITIES – 230MM RUBBER TRACKS, 1800MM BOOM, 1100MM DIPPER, NO BUCKET.
Load Point
1.5m
18Z-1
2.0m
2.5m
3.0m
3.5m
Capacity at maximum reach
Height
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
m
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
mm
2.5
387*
164
398*
304*
336*
155
313*
351*
301*
280*
346*
139
2690
2.0
379*
159
390*
329*
331*
255*
311*
315*
218
115
245*
420*
218
212
420*
115
3000
1.5
364*
151
374*
426*
383*
143
370*
400*
221
107
257*
386*
175
173
359*
87
3300
Distance
1.0
751*
305
827*
950*
452*
185
535*
621*
293
136
279
492*
263
97
215
424*
203*
80
170
364
203*
170
364*
80
3500
0.5
714
207
529
976*
492
167
377
742*
321
123
279
540*
218
100
216
437*
199*
74
167
348
199*
167
348*
74
3500
0
458
171
446
932*
357
146
350
733*
401
100
242
541*
202
95
195
411*
170
165
331*
76
3400
-0.5
615
161
438
835*
327
125
314
631*
274
99
241
484*
197
100
197
359*
179
193
312*
86
3250
-1.0
392
209*
402
686*
263
125
287
555*
212
106
221
403*
183
92
196
298*
183
196
298*
92
3000
-1.5
396
214
406
464*
269
128
292
383*
269
236
255
342*
114
2200
LIFT CAPACITIES – 230MM RUBBER TRACKS, 1800MM BOOM, 1100MM DIPPER, NO BUCKET.
Load Point
1.5m
19C-1
2.0m
2.5m
3.0m
3.5m
Capacity at maximum reach
Height
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
Extended
Retracted
Dozer Up
Dozer Down
m
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
kg
mm
2.5
520*
417
540*
439*
332*
319*
292*
301*
290*
277
270*
327*
2690
2.0
564*
410
586*
476*
334*
321*
297*
311*
373*
219
341
357*
373*
219
341
357*
3000
1.5
615*
396
634*
615*
402*
298
375*
392*
385*
220
356
375*
296
181
281
349*
3300
Distance
1.0
689*
430
837
962*
644*
407
613*
646*
494*
286
461*
482*
395*
218
380
398*
274
170
264
336*
274
170
264
336*
3500
0.5
665
417
789
986*
591
359
634
812*
451
273
454
575*
339
209
390
433*
267
165
272
344*
267
165
272
344*
3500
0
780
490
795
958*
566
359
599
769*
424
267
439
552*
257
205
353
438*
306*
170
328*
332*
3400
-0.5
918*
494
902*
920*
673*
359
590
724*
492*
272
432
532*
371*
214
378
392*
308*
191
313*
324*
3250
-1.0
701*
479
705*
788*
551*
350
559*
596*
424*
266
421*
442*
290*
248*
323*
334*
290*
248*
323*
334*
3000
-1.5
512*
476
480*
527*
460*
360
412*
428*
354*
298
348*
388*
2200
Lift capacity over front.
Lift capacity full circle.
Notes:
1. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
2. Lift capacities assume that the machine is on firm level ground and equipped with an approved lifting point.
3. A bucket must be fitted when lifting, the weight of this bucket must be deducted from the above lift capacities.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
ONE COMPANY, OVER 300 MACHINES.
Your nearest JCB dealer
Mini Excavator 16C-1/18Z-1/19C-1
Transport weight: 1755-1868kg Net engine power: 10.8kW
www.carbonbalancedpaper.com
unique print number
JCB Sales Limited, Rocester, Staffordshire, United Kingdom ST14 5JP.
Tel: +44 (0)1889 590312 Email: salesinfo@jcb.com
Download the very latest information on this product range at: www.jcb.com
9999/6018 en-GB 09/17 Issue 1
©2009 JCB Sales. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic,
mechanical, photocopying or otherwise, without prior permission from JCB Sales. All references in this publication to operating weights, sizes, capacities and other performance
measurements are provided for guidance only and may vary dependant upon the exact specification of machine. They should not therefore be relied upon in relation to suitability
for a particular application. Guidance and advice should always be sought from your JCB Dealer. JCB reserves the right to change specifications without notice. Illustrations and
specifications shown may include optional equipment and accessories. All images are correct at time of print. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.