BS-1030 Series - TOA Electronics Pte Ltd

BS-1030 Series
Universal Speaker
BS-1030 Series
Expanded installation options
The compact and versatile BS-1030 lends itself to many
different applications as it is versatile enough to be installed
virtually anywhere. Simple installations can be effected by
mounting the speaker directly to a wall either vertically or
horizontally using appropriate surface-to-mount screws.
If the speaker needs to be adjusted, a supplied mounting
bracket that allows considerable setting adjustment may be used.
For more demanding situations, the speaker may be used in
single or multiple unit configurations as requirements dictate.
In keeping with its multi purpose sensibility, this speaker
features a splash-proof construction allowing it to be
employed for outdoor installations as long as it is not directly
exposed to the elements. For additional placement options, the
free-standing speaker stand may be utilized as desired.
The BS-1030 is truly a universal speaker that suits any
application anywhere at an attractive price point.
Clean, modern design
Featuring an elegant enclosure formed of gentle curving
lines, the BS-1030’s aesthetically pleasing design will
suit virtually any installation’s requirements. The visually
appealing BS-1030 is available in white (BS-1030W) or black
(BS-1030B) enclosures.
Specification
Enclosure
Rated Input
Impedance
Sensitivity
Frequency
Response
Speaker
Components
Speaker Cable
Operating
Temperature
Water
Resistance
2-way bass reflex type
30W
8Ω
100V line: 330Ω (30W), 500Ω (20W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W)
70V line: 170Ω (30W), 250Ω (20W), 330Ω (15W), 500Ω (10W), 1kΩ (5W)
90dB (1W/1m, in anechoic chamber)
80 - 20,000Hz
12cm dynamic cone-type speaker
2.5cm balanced dome tweeter
2-cone cabtyre cable (diameter 6mm)
-10oC to +50oC
IP-X4
BS-1030B
Enclosure: ABS resin, black, paint
Grille & Bracket: surface treated steel plate, black, powder coating
Material / Finish
BS-1030W
Enclosure: ABS resin, white, paint
Grille & Bracket: surface treated steel plate, white, powder coating
Dimensions
Weight
Accessories
Options
Solid performance
The BS-1030 is a 2-way bass reflex speaker featuring a
frequency response that has been carefully tailored to
deliver good audio quality to suit general use such as speech
and music. Even with its compact dimensions, the BS-1030
distinguishes itself with a wide frequency response from 80Hz up
to 20,000Hz to capably handle most audio applications.
196 (W) x 290 (H) x 150 (D) mm (without bracket)
2.5kg (without bracket)
Bracket x 1, Bracket mounting screw x 2, Bracket mounting
washer x 2
Bracket: BS-1030B; WCB-13B, TMB-1, SP-410
BS-1030W; WCB-13W, TMB-1W, SP-410, SP-420
Stand: ST-16A
SP-420
SP-410
TMB-1/TMB-1W
WCB-13B/WCB-13W
In-Wall/Ceiling Mounting
Bracket
Simple switchover control for high or low impedance use
The BS-1030 has a nominal impedance of eight ohms and
may be used in both high or low impedance applications.
Rear panel-mounted rotary switches allow quick adjustments
in five increments for respectively selecting low or high
impedance 70V/100V use.
Table Mounting Bracket
Wall/Ceiling Mounting
Bracket
Wall/Ceiling Mounting Bracket
Installation Examples
* Direct
* With Supplement Bracket
SP-420
In-Wall/Ceiling
Mounting
Bracket
WCB-13B/WCB-13W
Wall/Ceiling Mounting Bracket
SP-410
Wall/Ceiling Mounting Bracket
ST-16A
Speaker Stand
TMB-1/TMB-1W
Table Mounting
Bracket
Like us on Facebook
facebook.com/TOAasiapacific
TOA Electronics Pte Ltd
www.toa.com.sg
Specifications are subject to change without notice.
Printed in Singapore (65) 865-0417-05