bintec RS230a

:: Seite 1 von 10 :: Datenblatt zum Produkt Funkwerk RS230A UK IP ACCESS ROUTER ADS mit DC# 555292 ::

DC diskontcomputer.com GmbH

Traunuferstrasse 110

4052 Ansfelden, Austria

The router with ADSL 2+ modem

bintec RS230a

•

•

•

•

ADSL 2+ modem - ADSL over POTS

5 x Gigabit Ethernet

Web-based configuration / wizards

IPSec - 5 tunnels, HW acceleration

•

•

IPv6

Stateful Inspection Firewall

• USB interface for e.g. LTE(4G)/UMTS(3G) backup

Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!

Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=555292




4052 Ansfelden, Austria bintec RS230a

The router with ADSL 2+ modem

The RS230a ADSL router comes equipped with an integrated ADSL 2+ Annex A modem (ADSL over POTS, ITU G992.1) and makes an ideal access router for SMEs, branch locations, and in home offices.

Product description

The bintec RS230a is a powerful and, thanks to its comprehensive equipment, flexible router.

The integrated ADSL 2+ modem on the RS230a supports the ADSL standard Annex A (ADSL over

POTS) in accordance with ITU G992.1.

The router in the fan-free metal housing guarantees long-term reliability in critical corporate applications and is ideal for use as an access router in SMEs, branch offices and home offices. In addition to the integrated ADSL 2+ modem, the device has five Gigabit Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for five hardware-accelerated

IPSec tunnels. An LTE(4G) or UMTS(3G) USB modem (stick) connected to the USB port can be used as a remote configuration access and as an backup interface.

Using functions flexibly

Only a few functions are required to forward data packets between two networks. The bintec router has features that go far beyond just routing and allow it to be integrated into complex IT infrastructures. By using Extended Routing and NAT (ERN) the data can be routed in IP routing according to criteria such as IP protocols (Layer 4), source or destination IP address, source or destination port, TOS/DSCP, source or destination interface and the status of the destination interface. In addition, you can also use network address translation to translate the data traffic for both inbound and outbound connections and individually for each interface based on a wide range of criteria.

The comprehensive multicast support makes the device ideal for use in multimedia and streaming applications.

The Stateful Inspection Firewall (SIF) offers effective protection against attacks from the

Internet through dynamic packet filtering. Firewall handling is made easier through numerous pre-configured services. An optional content filter rounds off the security functions of the devices*. In this case, all the outgoing Internet enquiries are classified and allow contents not wanted to be reliably filtered out.

The basic equipment of the RS Series also offers a SIP application level gateway (ALG) for the direct connection of IP telephones in the network or for registering with a VoIP provider, without affecting the security of the WAN connection. The corresponding releases in NAT and the internal

Stateful Inspection Firewall are controlled automatically by ALG for the length of the communication.

Quality of Service is more than a watchword in Teldat devices. Thanks to the rising convergence between voice and data, the classification of data streams is gaining in importance.

Our routers provide corresponding QoS mechanisms for prioritising the VoIP traffic ahead of normal internet traffic, for example, and to guarantee it sufficient bandwidth. Alternatively you can give normal data traffic priority over e-mail traffic. The bintec QoS implementation allows voice data to be processed before e-mal data, for example, within a VPN tunnel.

The DNS proxy function supports the LAN for address implementation and the automated IP configuration of PCs is carried out over an integrated DHCP server.

Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.teldat.org

bintec RS230a

15.10.2013

Subject to technical alterations

Page 2 / 10







Comprehensive IPSec implementation

The IPSec implementation integrated in bintec router works not only with preshared keys but also with certificates. This allows a public key infrastructure to be created for maximum security.

(The German Federal Office for Information Security also recommends the use of certificates.)

Furthermore, the bintec IPSec implementation offers support when creating VPN connections with dynamic IP addresses: Even small branch offices can be reached without having to be permanently online. If both VPN nodes only have dynamic IP addresses, confidential information can continue. The exchange of IP addresses is carried out over a dynamic DNS provider.

Load Balancing/Backup

The devices offer a unique level of flexibility thanks to the wide variety of interfaces supported.

The bintec Router supports the ability to configure two interfaces as WAN interfaces. As a result, there is not only more bandwidth available, but there is the opportunity to spread data traffic across individual WAN connections according to load or data type. Equally, you can use a connection (e.g. SDSL) for the VPN connection to the head office and use a second WAN port for a low-cost ADSL connection to guarantee the company's other data traffic. If either connection fails, the other can take over the entire data transfer. In the event that both lines fail, data traffic can automatically be routed over an LTE(4G) or UMTS(3G) modem connected to the USB port.

Simple configuration and maintenance

The router is configured over the Configuration Interface (FCI), using the integrated configuration wizards for example. The FCI is a web-based graphic user surface that you can use from any PC with an up-to-date Web browser via an HTTP or encrypted HTTPS connection. It also offers the opportunity to manage the devices locally and remotely over other configuration accesses such as Telnet, SSH and GSM dialin (only possible if USB LTE(4G) or UMTS(3G) modem is connected).

DIME Manager from Teldat is a free tool for managing Teldat devices. Dime Manager is aimed at administrators who manage networks with up to 50 devices.

The software simplifies the management and configuration of routers or access points either individually or in logical groups.

When developing DIME Manager, simple and efficient operation was the primary aim. It allows, for example, software updates or configurations to be applied to individual devices or groups of devices simply by drag and drop. DIME Manager recognises and manages new devices in the network using SNMP multicasts, in other words independent of their current IP address.

Variants

bintec RS230a - UK (5510000258) IP Access Router; incl. ADSL modem (Annex A, POTS); incl. IPSec (5 tunnels), certificates, HW encryption; 4+1 Gigabit Eth. switch; USB port; not for use with

Deutsche Telekom equipment; UK version.


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 3 / 10







bintec RS230a (5510000221) IP Access Router; incl. ADSL modem (Annex A, POTS); incl. IPSec (5 tunnels), certificates, HW encryption; 4+1 Gigabit Eth. switch; USB port; not for use with

Deutsche Telekom equipment; german and intern. version.

Features

DSL

ADSL

ATM

ATM

ATM

ATM

ADSL 2 / ADSL 2+

ADSL 2

ADSL 2

ADSL

ADSL over POTS (ITU G.992.1 Annex A G.Lite (ITU G.922.2)

ADSL over POTS (ITU G.992.3, ITU G.992.5 Annex A)

ADSL2 over POTS Annex L

ADSL2 over POTS Annex M

Support of Dying Gasp

Support of layer 1 protocol AAL5, PVCs, RFC 1483

Support of up to 7 virtual channels (VC)

Support of OAM F4/F5 line monitoring

Support of ATM traffic management (COS - CBR, VBR, UBR)

VPN

PPTP (PAC/PNS)

GRE v.0

L2TP

Number of VPN tunnels

IPSec

Number of IPSec tunnels

IPSec Algorithms

IPSec hardware acceleration

IPSec IKE

IPSec IKE Config Mode

IPSec IKE XAUTH (Client/Server)

IPSec IKE XAUTH (Client/Server)

IPSec NAT-T

IPSec IPComp

Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)

Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation

Layer 2 tunnelling protocol inclusive PPP user authentication

Inclusive 5 active VPN tunnels with the protocols IPSec, PPTP, L2TP and GRE v.0 (also in combination possible)

Internet Protocol Security establishing of VPN connections

Inclusive 5 active IPSec tunnels

DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish

(256 Bit); MD-5, SHA-1, RipeMD160, Tiger192 Hashes

Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES

IPSec key exchange via preshared keys or certificates

IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.

Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and

XAUTH server for loging of XAUTH clients

Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions see www.teldat.de).

Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT

IPSec IPComp data compression for higher data throughput via LZS


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 4 / 10







VPN

IPSec certificates (PKI)

IPSec SCEP

IPSec Certificate Revocation

Lists (CRL)

IPSec Dead Peer Detection

(DPD)

IPSec dynamic DNS

IPSec RADIUS

IPSec Multi User

IPSec QoS

IPSec NAT

IPSec throughput (1400)

IPSec throughput (256)

Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server; upload of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via FCI

Certificates management via SCEP (Simple Certificate Enrollment Protocol)

Support of remote CRLs on a server via LDAP or local CRLs

Continuous control of IPSec connection

Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a IPSec connection.

Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which were configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).

Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry

The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel

By activating of NAT on an IPSec connection it is possible, to implement several remote locations with identical local IP addess networks in different IP nets for the VPN connection

34 Mbps with 1400 Byte packets with AES 256 / AES 128 / 3 DES encryption

11 Mbps with 256 Byte packets with AES 256 / AES 128 / 3 DES encryption

Security

NAT/PAT

Policy based NAT/PAT

Policy based NAT/PAT

Content Filtering

Stateful Inspection Firewall

Packet Filter

Symmetric Network and Port Address Translation (NAT/PAT) with randomly generated ports inclusive Multi NAT (1:1 translation of whole networks)

Network and Port Address Translation via different criteria like IP protocols, source/destination IP

Address, source/destination port

For incoming and outgoing connections and for each interface variable configurable

Optional ISS/Cobion Content filter (30 day test license inclusive)

Packet filtering depending on the direction with controling and interpretation of each single connection status

Filtering of IP packets according to different criteria like IP protocols, source/destination IP address, source/destination port, TOS/DSCP, layer 2 priority for each interface variable configurable

Routing

Policy based Routing

Multicast IGMP

Multicast IGMP Proxy

Multicast inside IPSec tunnel

RIP

Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4), source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and destination interface status

Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution of IP packets to several stations

For easy forwarding of multicast packets via dedicated interfaces

Enables the transmission of multicast packets via an IPSec tunnel

Support of RIPv1 and RIPv2, separated configurable for each interface


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 5 / 10







Routing

Extended RIP

Routing throughput (1518)

Routing throughput (256)

Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of the routes; furthermore the possibility to define RIP filters for each interface.

199 Mbps with 1518 Byte packets

198 Mbps with 256 Byte packets

Protocols / Encapsulations

PPP/MLPPP

PPPoE (Server/Client)

MLPPPoE (Server/Client)

PPPoA

IPoA

DNS

DYN DNS

DNS Forwarding

DHCP

Packet size controling

Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the

Multilink extension MLPPP for the bundeling of several connections

Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via

Ethernet/DSL (RFC 2516)

Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support

MLPPPoE)

Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL

Enables the easy routing of IP via ATM

DNS client, DNS server, DNS relay and DNS proxy

Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for establishing of VPN connections

Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.

DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration

Adaption of PMTU or automatic packet size controling via fragmentation

Quality of Service (QoS)

Policy based Traffic Shapping

Bandwidth reservation

DiffServ

Layer2/3 tagging

TCP Download Rate Control

Dynamic bandwidth management via IP traffic shaping

Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths

Priority Queuing of packets on the basis of the DiffServ/TOS field

Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes

For reservation of bandwidth for VoIP connections

Redundancy / Loadbalancing

BRRP

BoD

Load Balancing

VPN backup

Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with free selectable priority

Bandwidth on Demand: dynamic bandwidth to suit data traffic load

Static and dynamic load balancing to several WAN connections on IP layer

Simple VPN backup via different media. Additional enables the Teldat interface based VPN concept the application of routing protocols for VPN connections.


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 6 / 10







Layer 2 Functionality

Bridging Support of layer 2 bridging with the possibility of separation of network segment via the configuration of bridge groups

VLAN

Proxy ARP

Support of up to 32 VLAN (Virtual LAN) for segmentation of the network in independent virtual segments (workgroups)

Enables the router to answer ARP requests for hosts, which are accessible via the router. That enables the remote clients to use an IP address from the local net.

Logging / Monitoring / Reporting

Internal system logging

External system logging

E-Mail alert

SNMP traps

Activity Monitor

IPSec monitoring

Interfaces monitoring

IP accounting

RADIUS accounting

Keep Alive Monitoring

Tracing

Tracing

Syslog storage in RAM, display via web-based configuration user interface (http/https), filter for subsystem, level, message

Syslog, several syslog server with different syslog level configurable

Automatic E-Mail alert by definable events

SNMP traps (v1, v2, v3) configurable

Sending of information to a PC on which Brickware is installed

Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface

(http/https)

Statistic information of all pysical and logical interfaces (ETH0, ETH1, SSIDx, ...), output via web-based configuration user interface (http/https)

Detailed IP accounting, source, destination, port, interface and packet/bytes counter, transmission also via syslog protocol to syslog server

RADIUS accounting for PPP, PPTP, PPPoE and ISDN dialup connections

Control of hosts/connections via ICMP polling

Detailed traces can be done for different protocols e.g. ISDN, PPPoE, ... generation local on the device and remote via DIME Manager

Traces can be stored in PCAP format, so that import to different open source trace tools (e.g.

wireshark) is possible.

Administration / Management

RADIUS

RADIUS dialout

TACACS+

Time synchronization

Automatic Time Settings

Central check of access authorization at one or several RADIUS server, RADIUS (PPP, IPSec inclusive X-Auth and login authentication)

On a RADIUS server configured PPP und IPSec connection can be loaded into the gateway (RADIUS dialout).

Support of TACACS+ server for login authentication and for shell comando authorization

The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server configurable). The obtained time can also be transmitted per SNTP to SNTP clients.

Time zone profiles are configurable. That enables an automatic change from summer to winter time.


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 7 / 10







Administration / Management

Supported management systems

Configurable scheduler

Configuration Interface (FCI)

Software update

Remote maintenance

Configuration via serial interface

GSM remote maintenance

Device discovery function

On The Fly configuration

SNMP

SNMP configuration

Configuration export and import

SSH login

HP OpenView

XAdmin

DIME Manager, XAdmin

Configuring of time and event controlled tasks, e.g. reboot device, activate/deactivate interface, activate/deactivate WLAN, trigger SW update and configuration backup

Integrated web server for web-based configuration via HTTP or HTTPS (supporting self created certificates). This user interface is by most of Teldat GmbH products identical.

Software updates are free of charge; update via local files, HTTP, TFTP or via direct access to the

Teldat web server

Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS and SNMP (V1,V2,V3)

Serial configuariton interface is available

Remote maintenance via GSM login (external USB UMTS (3G) modem required)

Device discovery via SNMP multicast.

No reboot after reconfiguration required

SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access list configurable

Complete management with MIB-II, MIB 802.11, Enterprise MIB

Load and save configurations, optional encrypted; optional automatic control via scheduler

Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications

Integration into Network Node Manager

Support of XAdmin roll out and configuration management tool for larger router installations (IP)

Interfaces

Ethernet

USB 2.0 host

Serial console

ADSL/ADSL 2+

Hardware

Realtime clock

Wall mounting

Environment

Power supply

5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN or WAN.

USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see www.teldat.org)

Serial console interface / COM port (mini USB)

ADSL over POTS

System time persists even at power failure for some hours.

Integrated in housing

Temperature range: Operational 0°C to 40°C; storage -10°C to 70°C; Max. rel. humidity 10 - 95%

(non condensing)

External wall power supply 110-240V / 12 V DC, 1.5 A, with energy efficient switching controler; complies with EuP directive 2008/28/EC


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 8 / 10







Hardware

Power consumption

Housing

Dimension

Weight

Fan

Reset button

Status LEDs

Standards and certifications

Less than 5 Watt

Metal case, opening for Kensington lock, connectors at back side, prepared for wall mounting

Ca. 235 mm x 31.5 mm x 146,5 mm (W x H x D)

Ca. 1000g

Fanless design therefor high MTBF

Restart or reset to factory state possible

Power, Status, 10 * Ethernet, ADSL, USB

R&TTE directive 1999/5/EG; EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN 61000-3-3; EN

61000-4-4; EN 60950-1; EN 300 328

Content of Delivery

Manual

DVD

Ethernet cable

Power supply

ADSL cable

Quick Installation Guide in German and English

DVD with system software, management software and documentation

1 Ethernet cable, 3m

Wall power supply 110-240V / 12 V DC, 1.5 A, with high efficient switching controler

ADSL cable (RJ11-RJ11), 3m

Service

Warranty

Software Update

2 year manufacturer warranty inclusive advanced replacement

Free-of-charge software updates for system software (BOSS) and management software (DIME

Manager)

Accessoires

Software Licenses

RS-Series-BRRP (5500001023)

Cobion Content Filter Small (80551)

RS-Series software license for Bintec Router Redundancy Protocol (BRRP)

Cobion content filter for RSxxx, Rxx02, RTxx02 series; R230a(w), R232b(w), TR200,

R1200(w/wu), R3000(w), R3400, R3800, R232aw; list price for one year

Pick-up Service / Warranty Extension

Service Package 'small' (5500000810) Warranty extension of 3 years to a total of 5 years, including advanced replacement for Teldat products of the category 'small'. Please find a detailed description as well as an overview of the categories on www.teldat.de/servicepackages.


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 9 / 10







Product Services

HotSpotHosting 2yr 1 location (5500000861)

HotSpotHosting 1yr 1 location (5510000198)

Additional HotSpot location (5510000199)

HotSpot solution hosting fee for 2 year and 1 location

HotSpot solution hosting fee for 1 year and 1 location

Additional location for the HotSpot solution (551000198, 5500000861) valid for one year

Add-ons

Active Antenna UMTS-USB-sticks

(5500001017)

PS-EURO-RSxxx (5500000729)

Cables

Console Cable MiniUSB to DSUB9

(5500000717) novero active UMTS (3G) antenna for UMTS (3G) USB modems, UMTS band 1 active antenna, 7db, 15m cable

Power supply EURO for RSxxx

Serial console cable for RS, RT, Rxx02 Series and hybird (Mini USB to D-SUB 9)


Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25


bintec RS230a

15.10.2013


Page 10 / 10



bintec RS230a

The router with ADSL 2+ modem

•

•

•

•

ADSL 2+ modem - ADSL over POTS

5 x Gigabit Ethernet

Web-based configuration / wizards

IPSec - 5 tunnels, HW acceleration

•

•

IPv6

Stateful Inspection Firewall

• USB interface for e.g. LTE(4G)/UMTS(3G) backup

The router with ADSL 2+ modem

Product description

Using functions flexibly

Comprehensive IPSec implementation

Load Balancing/Backup

Simple configuration and maintenance

Related manuals

Teldat

APR222ac

Teldat

Funkwerk

R230aw

Teldat

Teldat

Inter-Tech