Surface Mount Antennas WiFi 5 GHz &

US Office: Tel: 800.648.2800 or +1.847.671.6690
UK Office: Tel: (+44) 1543 459 555
Surface Mount Antennas
WiFi 5 GHz & Broadband
RM Body
Direct N Jack
• Broadband model covers 1.7-6.0 GHz
• Ground plane independent omni
• Rugged ASA plastic radome, stud
mounts to 5/8” hole (16 mm diameter)
Trunk Lid Mount
DM2 “Dome” Antenna
Single & Dual 2.4/5 GHz
• Low profile design provides watertight
Model # Frequency
These body mount style antennas can be mounted to any vehicle,
container or bulkhead. The rugged style is excellent for industrial applications, yet attractive for consumer use.
RM3-5500-DN-BLK The designs use a 5/8” (16 mm) feed thru for securing to the vehicle.
As an option, a direct N Female is also available. The antennas are
outfitted with 1 foot (30 cm) of RF-195 cable & an SMA male connector. Jumper cables for completing the installation can be supplied
separately, and use RF-195 low loss cable. Alternatively, a longer
integral cable can be supplied upon request.
Antenna has a peak gain of up to 5 dBi in the RM Series. No ground
plane is required for proper operation. The antennas can even be
mounted on fiberglass or plastic housing and meet specifications.
The RM Series antenna has a black or white ASA UV resistant plastic
radome with a heavy duty metal base.
The DM Series Low Profile “Dome” antenna radome consists of white
or black ASA UV resistant plastic and threaded feed thru.
Operating Temp:
Nominal Impedance:
Maximum Power:
See above
RM Size: DM Size:
Case Material:
Hardware: 1.70” diameter x 3” high
(45mm x 76 mm)
3” diameter x 1.5” high
(76 mm x 38 mm)
ASA plastic, UV Resistant
Nut, lockwasher and gasket
5 dBi peak
2.5 dBi
2:1 max over range
-40o to +85o C
50 ohms
10 watts
US Office & Headquarters: 1140 W Thorndale Ave, Itasca, IL 60143, USA
UK Office: 8 Miras Business Park, Keys Park Road, Hednesford, Staffs. WS12 2FS, UK
5.15-5.9 GHz
5.15-5.9 GHz
1.7-6 GHz
1.7-6 GHz
DM2-5250-3C-WHT-12 DM2-5725-3C-WHT-12
DM2-5500-3C-WHT-12 DM2-2400/5500-3C-WHT-12 5.15-5.35 GHz
5.7-5.9 GHz
5-6 GHz
2.4-2.5 & 4.9-6.0 GHz
Add “-TM” for Trunk Lid Mount Option
Color options available for above models
WHT-White or BLK-Black
RM-MK Pole/wall mount for RM Series
Heavy duty Pole/Wall Mount
Mounting Stud:
RM Mounting Option:
Pigtail Cable:
Pigtail Connector:
Jumper Cable: Shock & Vibration:
Water Ingress:
5/8” (16 mm) diameter feed thru
3/4” long thread for 1/2” metal
(19mm long for 12.7mm metal)
3/4” long threads for 1/2” metal
(19mm long for 12.7mm metal)
Direct N Jack (Female)
Pole & Wall Mount adapter,
RF-195, 1 foot (305 mm)
SMA Plug (Male), use jumpers for longer installation
Available in varying lengths EN 61373, IEEE 1478, MIL-810G
DM2: IPx5, RM:IP67
Specifications subject to change without notice (3/2014)
Download PDF